FGN0.50BK [ETC]
SLEEVING 1/2" X 200' BLACK;型号: | FGN0.50BK |
厂家: | ETC |
描述: | SLEEVING 1/2" X 200' BLACK |
文件: | 总2页 (文件大小:973K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EXTREME
TEMPERATURE
Technical Data Sheet
Put-Ups
UL Recognized
Nominal
Part
#
Maximum
Diameter
Wall
Bulk
Spool
Shop
Spool
Available
Colors
Lbs/
100’
Size
Thickness
Resin Coated, Heavy Weight
Fiberglass Won’t Burn, Melt
Or Become Brittle
1/4”
3/8”
1/2”
5/8”
3/4”
7/8”
1”
FGN0.25
FGN0.38
FGN0.50
FGN0.63
FGN0.75
FGN0.88
FGN1.00
FGN1.50
FGN2.50
3/8”
5/8”
3/4”
0.031”
0.043”
0.046”
0.046”
0.046”
0.046”
0.057”
0.061”
0.071"
200’
200’
200’
200’
200’
200’
100’
100’
100'
50’
50’
50’
50’
50’
50’
25’
25’
25'
2
2
2
2
2
2
2
2
2
2.00
3.30
4.80
5.30
6.40
7/8”
Easy To Install-Cuts With
Scissors
1 1/8”
1 1/4”
1 5/8”
2 5/8”
4 1/8"
8.70
10.50
16.00
19.70
Resists Gasoline And
Engine Chemicals
1 1/2”
2 1/2”
Cut And Abrasion Resistant
Resin Coated Fiberglass
Protects To 1,200°F
INSULTHERM ® (FG) is an extremely high
Colors Available:
temperature resistant sleeve commonly used
2 = BK and SV
as thermal protection for wires, cables and hoses
that are subjected to continuous and extreme
high temperature environments, such as
engine manifolds and exhaust systems.
FG is braided from fiberglass yarns and coated
with high temperature resins. FG is tough and
durable, maintaining its tight structure under
extreme vibration, abrasion, mechanical stress
and temperature variations.
Cut Cleanly
Scissors
FG installs easily over a variety of applications
to either deflect or retain heat in environments
up to 1,200° F.
Material
Resin Coated Fiberglass
“...will withstand extreme heat...
provides the protection needed”
Grade
FGN
Peter Mercier - Engineer Team Bucknum Racing
www.bucknum.com
Wall Thickness
Refer to Chart
Colors Available:
Drawing Number
TF001INS-WD
Black (BK) and Silver (SV).
www.techflex.com
1 (833) SLEEVING • (973) 300-9242 • fax: (973) 300-9409
104 Demarest Road • Sparta, NJ 07871
VW-1
EXTREME
TEMPERATURE
Technical Data Sheet
Melt Point
ASTM D-2117
2,048°F (1,120°C)
ABRASION
Abrasion Resistance
FLAMMABILITY
Rating _______________________ VW-1
Maximum Continuous
Mil-I-23053
1,202°F (650°C)
High
Abrasion Test Machine
Taber 5150
Minimum Continuous
Abrasion Test Wheel
Calibrase H-18
-94°F (-70°C)
CHEMICAL
Abrasion Test Load
500g
RESISTANCE
1=No Effect
4=More Affected
Room Temperature
73°F
2=Little Effect 5=Severely Affected
3=Affected
PHYSICAL
PROPERTIES
Humidity
55%
Aromatic Solvents ________________ 1
Aliphatic Solvents_________________ 1
Chlorinated Solvents ______________ 1
Weak Bases ______________________ 1
Salts____________________________ 1
Strong Bases _____________________ 1
Salt Water 0-S-1926________________ 1
Hydraulic Fluid MIL-H-5606 _________ 1
Lube Oil MIL-L-7808 _______________ 1
De-Icing Fluid MIL-A-8243 __________ 1
Strong Acids _____________________ 2
Strong Oxidants __________________ 2
Esters/Ketones ___________________ 1
UV Light ________________________ 2
Petroleum _______________________ 1
Fungus ASTM G-21 ________________ 1
Halogen Free ___________________ Yes
RoHS __________________________ Yes
Monofilament Diameter_________ NA
ASTM D-204
Visible Minor Scuffing
200 Test Cycles
Flammability Rating ___________ VW-1
Recommended Cutting _______ Scissor
Colors __________________________ 2
Wall Thickness____________.031”-.061”
Specific Gravity ASTM D-792____ 1.0-1.8
Scuffing And Wear
Continues
300 Test Cycles
Scuffing And Wear
Continues
500 Test Cycles
Moisture Absorption ____________ .01
% ASTM D-570
Hard Vacuum Data _________________
ASTM E-595
Several Broken Strands
1,300 Test Cycles
TML __________________________ .02
CVCM ________________________ .01
WVR__________________________ .00
Outgassing ___________________Low
Material Destroyed
1,650 Test Cycles
Pre-Test Weight
19,411.6 mg
Post-Test Weight
17,154.5 mg
Test End Loss Of Mass
Point Of Destruction
SVHC ________________________ None
2,257.1 mg
© 2021 Techflex® - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex® is strictly forbidden.
Techflex® product names and logos are registered trademarks of Techflex®, unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable.
Techflex® makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s® only obligations are those in standard terms of
sale for these products and Techflex® will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions.
08-26
Users should make their own evaluation to determine the suitability of these products for their unique and specific applications.
相关型号:
FGP-1001-0511-2-0SS
Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Blue Insulator, Plug
YAMAICHI
©2020 ICPDF网 联系我们和版权申明