FN9222S1B-7-06HI [ETC]
General Performance IEC Inlet Filter;型号: | FN9222S1B-7-06HI |
厂家: | ETC |
描述: | General Performance IEC Inlet Filter |
文件: | 总6页 (文件大小:724K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IEC Inlet Filters
FN 9222
General Performance IEC Inlet Filter
n Rated currents up to 20A
n Excellent performance/size ratio
n Optional medical versions (B type)
according to IEC/EN 60601-1
n Snap-in versions (S and S1 type)
n Hot inlet versions (HI type)
n Optional overvoltage protection
(Z type)
Approvals
except HI-types
Technical specifications
Typical electrical schematic
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
250VAC, 50/60Hz
dc to 400Hz
1 to 20A @ 50°C
1 to 10A (ENEC, CQC)
Standard, R and B types
Cx
R
2xL
2xCy
N
N‘
Approvals by rated current:
16A (ENEC, CQC) for 16 and 20A types
1 to 20A (UL, CSA)
PE
P
PE
P‘
High potential test voltage:
P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 1000VAC for 2 sec (1 to 10A types, not Z types)
P –> N 250VAC for 2 sec (all Z types)
P –> N 1100VDC for 2 sec (16 and 20A types, not Z types)
IP40 according to IEC 60529
-25°C to +85°C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
(X to XX A, not Z types)
UL 94V-2 or better
Line
Load
Z types
Cx
2xL
2xCy
Protection category:
Temperature range (operation and storage):
Design corresponding to:
N
N‘
PE
P‘
PE
Flammability corresponding to:
Surge pulse protection (optional):
MTBF @ 40°C/230V (Mil-HB-217F):
P
2kV, IEC 61000-4-5
≤15A: 3,040,000 hours
Line
Load
≥16A: 2,256,000 hours
Features and benefits
Typical applications
The FN 9222 IEC inlet filter combines an
IEC inlet and mains filter with excellent filter
attenuation in a small form factor. Choosing
the FN 9222 product line brings you the rapid
availability of a standard filter associated with
the necessary safety acceptances. Standard
IEC connector filters are a practical solution
helping you to pass EMI system approval in
a short time. A wide selection on amperage
ratings, output connections, mounting
n
Exceptional conducted attenuation
performance, based on chokes with high
saturation resistance and excellent thermal
behavior.
n
n
n
Portable electrical and electronic
equipment
Small to medium-sized machines and
household equipment
n
n
n
Rear/front or snap-in mounting.
Wide mounting flanges available.
Optional medical versions (B type) comply
with the requirements of IEC/EN 60601-1
for creepage and clearance, leakage
current and high potential testing.
12 and 15A types with hot inlet available.
Optional surge pulse protection.
Different output connections offering
maximum flexibility for assembly.
Custom-specific versions are available on
request.
Single-phase power supplies, switch-mode
power supplies
n
n
n
Test and measurement equipment
Medical equipment
Rack mounting equipment
possibilities and filters for medical applications
are designed to offer you the desired solution.
n
n
n
n
> Components > FN 9222
Filter selection table
Filter
Rated current Leakage current*
Inductance
L
Capacitance
Resistance Output connections
R
Weight
@ 50°C (25°C)
@ 250VAC/50Hz
Cx
Cy
[A]
1 (1.2)
3 (3.5)
[µA]
373
373
373
373
373
373
373
373
373
[mH]
12
2.5
0.78
0.5
0.225
0.11
0.075
0.11
0.075
[µF]
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
[nF]
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
[kΩ]
[g]
40
40
40
40
40
40
40
40
40
FN 9222x-1-..
FN 9222x-3-..
FN 9222x-6-..
FN 9222x-8-..
FN 9222x-10-..
FN 9222x-12-..
FN 9222x-15-..
FN 9222x-12-..HI
FN 9222x-15-..HI
-06
-06
-06
-06
-06
-06
-06
-06
-06
-07
-07
-07
-07
-07
-07
-07
-07
-07
6 (7.2)
8 (10.6)
10 (11.6)
12 (12)
15 (15)
12 (12)
15 (15)
FN 9222xR-1-..
FN 9222xR-3-..
FN 9222xR-6-..
FN 9222xR-8-..
FN 9222xR-10-..
FN 9222xR-12-..
FN 9222xR-15-..
FN 9222xR-16-06
FN 9222xR-20-06
FN 9222xR-12-..HI
FN 9222xR-15-..HI
1 (1.2)
3 (3.5)
6 (7.2)
373
373
373
373
373
373
373
373
373
373
373
12
2.5
0.78
0.5
0.225
0.11
0.075
0.54
0.4
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.33
0.33
0.1
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
-06
-06
-06
-06
-06
-06
-06
-06
-06
-06
-06
-07
-07
-07
-07
-07
-07
-07
40
40
40
40
40
40
40
100
100
40
8 (10.6)
10 (11.6)
12 (12)
15 (15)
16 (18.5)
20 (23)
12 (12)
15 (15)
0.11
0.075
-07
-07
0.1
40
FN 9222xB-1-..
FN 9222xB-3-..
FN 9222xB-6-..
FN 9222xB-8-..
FN 9222xB-10-..
FN 9222xB-12-..
FN 9222xB-15-..
FN 9222xB-16-06
FN 9222xB-20-06
FN 9222xB-12-..HI
FN 9222xB-15-..HI
1 (1.2)
3 (3.5)
6 (7.2)
2
2
2
2
2
2
2
2
2
2
2
12
2.5
0.78
0.5
0.225
0.11
0.075
0.54
0.4
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.33
0.33
0.1
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
-06
-06
-06
-06
-06
-06
-06
-06
-06
-06
-06
-07
-07
-07
-07
-07
-07
-07
40
40
40
40
40
40
40
100
100
40
8 (10.6)
10 (11.6)
12 (12)
15 (15)
16 (18.5)
20 (23)
12 (12)
15 (15)
0.11
0.075
-07
-07
0.1
40
FN 9222UZ-1-06
FN 9222UZ-3-06
FN 9222UZ-6-06
FN 9222UZ-8-06
FN 9222UZ-10-06
FN 9222UZ-12-06
FN 9222UZ-15-06
1 (1.2)
3 (3.5)
6 (7.2)
8 (10.6)
10 (11.6)
12 (12)
15 (15)
373
373
373
373
373
373
373
12
2.5
0.78
0.5
0.225
0.11
0.075
0.1
0.1
0.1
0.1
0.1
0.1
0.1
2.2
2.2
2.2
2.2
2.2
2.2
2.2
-06
-06
-06
-06
-06
-06
-06
43
43
43
43
43
43
43
*
Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
> Components > FN 9222
Product selector
FN 9222xx-yy-..HI-zz
Snap-in range for S version only
Blank:
Snap-in range 0.7 to 1.5mm
Snap-in range 1.5 to 2.2mm
20:
Blank:
HI:
Standard IEC inlet type C14 (1 to 15A types), C20 (16 and 20A types)
Hot IEC inlet type C16 (12 and 15A types only)
06:
07:
Faston 6.3 x 0.8mm (spade/soldering)
Wire leads
1 to 20: Rated current
Blank:
R:
Standard version
Bleed resistor
B:
Medical version (with bleed resistor and without Y2-capacitor)
Optional surge pulse protection with additional varistor (MOV)
(Z types have longer housings, only available for FN 9222UZ-yy-06)
Z:
Blank:
U:
Standard housing with mounting flanges
Housing with wider mounting flanges
S:
Snap-in version, snapper on vertical side (1 to 15A types only)
Snap-in version, snapper on horizontal side (1 to 15A types only)
S1:
For example: FN 9222-15-07, FN 9222S1B-10-06-20, FN 9222R-12-06HI, FN 9222UZ-15-06
Typical filter attenuation
Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym
1 and 3A types
6 to 10A types
12 and 15A types
16 and 20A types
> Components > FN 9222
Mechanical data
FN 9222, 1 to 15A types
FN 9222, 16 and 20A types
B
IEC plug type
C14
B
IEC plug type
C20
6.3 x 0.8
6.3 x 0.8
S
S
A
C
E
J
A
C
E
J
H
H
F
D
I
G
G
F
D
I
FN 9222S
FN 9222S1
B
B
6.3 x 0.8
C14
6.3 x 0.8
C14
A
E
J
A
E
J
G
F
D
I
G
F
D
I
FN 9222-HI
FN 9222U
B
B
C16
C14
6.3 x 0.8
6.3 x 0.8
S
S
A
C
E
J
C
E
J
A
H
H
F
D
I
G
F
D
I
G
-07 connection style
Installation
T
X
Z
Y
Panel cut out
M
N
R
P
C
> Components > FN 9222
Dimensions
FN 9222
1 to 8A
FN 9222U FN 9222UZ FN 9222S
1 to 8A
FN 9222S1
10 to 15A 1 to 8A
FN 9222-HI
10 to 15A 12 and 15A
10 to 15A 16 and 20A
A
B
C
D
E
48
48
53
30
42 0.2
66
34
51.85
25
40 0.2
38.25
27.8
5.5
51.85
25
40 0.2
46.8
27.8
5.5
29.9
22.4
29.9
22.4
29.9
22.4
29.9
22.4
48
22.5
40 0.2
38.4
27.8
5.5
22.5
40 0.2
38.4
27.8
5.5
22.5
40 0.2
38.4
27.8
5.5
38.4
27.8
5.5
38.4
27.8
5.5
38.4
27.8
5.5
38.4
27.8
5.5
F
4
G
H
I
20.1
Ø3.3
14
13.3
R ≤ 3
21.5
28.5
M3
20.1
Ø3.3
14
13.3
R ≤ 3
21.5
28.5
M3
26.5
Ø3.5
14
13.3
R ≤ 3
27
34.7
M3
90°
20.1
Ø3.3
14.1
13.3
R ≤ 3
21.5
28.5
M3
20.1
Ø3.3
14
13.3
R ≤ 3
21.5
28.5
M3
20.1
20.1
20.1
20.1
20.1
Ø3.3
14
13.3
R ≤ 3
21.5
28.5
M3
14
14
14
14
J
13.3
R ≤ 1.5
20.8
29.4
13.3
R ≤ 1.5
20.8
29.4
13.3
R ≤ 1.5
21.9
28.5
13.3
R ≤ 1.5
21.9
28.5
M
N
P
R
S
90°
90°
90°
90°
90°
T*
T*
X
Y
Z
0.7 - 1.5
1.5 - 2.2
AWG 18
160
0.7 - 1.5
1.5 - 2.2
AWG 16
160
0.7 - 1.5
1.5 - 2.2
AWG 18
160
0.7 - 1.5
1.5 - 2.2
AWG 16
160
AWG 18
160
6
AWG 16
160
6
AWG 16
160
6
6
6
6
6
*
For selecting the panel thickness, please refer to the filter selection table.
All dimensions in mm; 1 inch = 25.4mm
Tolerances according: ISO 2768-m / EN 22768-m
Your local partner: To find your local partner within Schaffner’s global network, please go to www.schaffner.com
February 2009
Headquarters and
Sales and application centers
Switzerland
To find your local partner within
global innovation and
development center
Schaffner EMV AG
Nordstrasse 11
Schaffner‘s global network, please go to
China
Schaffner EMC Ltd. Shanghai
Building 11, Lane 1365
East Kangqiao Road
Shanghai 201319
4542 Luterbach
www.schaffner.com
Schaffner Group
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
F +41 32 681 66 41
sales@schaffner.ch
May 2011
Switzerland
T +86 21 6813 9855
F +86 21 6813 9811
cschina@schaffner.com
www.schaffner.com
T +41 32 681 66 26
F +41 32 681 66 30
info@schaffner.ch
www.schaffner.com
Singapore
© 2011 Schaffner EMC.
Schaffner EMC Pte Ltd.
Blk 3015A Ubi Road 1
05-09 Kampong Ubi Industrial
Estate
T +65 6377 3283
F +65 6377 3281
Specifications subject to change without
notice. All trademarks recognized.
Germany
Schaffner is an ISO-registered company.
Its products are designed and manufac-
tured under the strict quality and environ-
mental requirements of the ISO 9001 and
ISO 14001 standards.
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
singaporesales@schaffner.com
Spain
germanysales@schaffner.com
Schaffner EMC España
Calle Caléndula 93,
Miniparc III, Edificio E
El Soto de la Moraleja,
Alcobendas
28109 Madrid
T +34 618 176 133
spainsales@schaffner.com
This document has been carefully
checked. However, Schaffner does not
assume any liability for errors or inac-
curacies.
Finland
Schaffner Oy
Tynninkuja 7
08700 Lohja
T +358 19 35 72 71
F +358 19 32 66 10
finlandsales@schaffner.com
Taiwan
France
Schaffner EMV Ltd.
6th Floor, No 413
Rui Guang Road
Neihu District
Schaffner EMC S.A.S.
112, Quai de Bezons
95103 Argenteuil
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com
Taipei City 114
T +886 2 87525050
F+886 2 87518086
taiwansales@schaffner.com
Italy
Schaffner EMC S.r.l.
Via Galileo Galilei, 47
20092 Cinisello Balsamo (MI)
T +39 02 66 04 30 45/47
F +39 02 61 23 943
italysales@schaffner.com
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muang P.O. Box 14
Lamphun 51000
T +66 53 58 11 04
Japan
F +66 53 58 10 19
Schaffner EMC K.K.
Mitsui-Seimei Sangenjaya Bldg. 7F
1-32-12, Kamiuma, Setagaya-ku
Tokyo 154-0011
thailandsales@schaffner.com
UK
Schaffner Ltd.
T +81 3 5712 3650
5 Ashville Way
F +81 3 5712 3651
japansales@schaffner.com
www.schaffner.jp
Molly Millars Lane
Wokingham
Berkshire RG41 2PL
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com
www.schaffner.uk.com
Sweden
Schaffner EMC AB
Turebergstorg 1, 6
19147 Sollentuna
T +46 8 5792 1121 / 22
F +46 8 92 96 90
USA
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey 08837
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffner.com/us
swedensales@schaffner.com
相关型号:
©2020 ICPDF网 联系我们和版权申明