FX1515M-31P-5SH [ETC]
1mm Pitch Cable-to-Board Connectors supporting LVDS signal; mm间距线对板连接器支持LVDS信号
| 型号： | FX1515M-31P-5SH |
| 厂家： | 
ETC |
| 描述： | 1mm Pitch Cable-to-Board Connectors supporting LVDS signal |
| 文件： | 总24页 (文件大小：1670K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
FX15 Series
Space saving, Equal length transmission lines
Patent
pending
Termination side: 0.5 mm pitch, 1-row construction
Mating side: 1 mm pitch, staggered 2-row construction
Contacts consolidated into 1 row for equal length transmission lines
Fig.1
■Features
Self-alignment of ±1.5 mm
1. Space saving
Large guide post
Reduction in space is achieved by designing the
contacts in 2-row staggered 1 mm pitch on the mating
side and on a single row 0.5 mm pitch on the termination
side (Fig. 1).
1.5mm
1.5mm
2. Equal length transmission lines
Contact configuration creates equal length transmission
lines preventing deterioration of LVDS signal within the
connector (Fig.1).
Fig.2
3. Different types
Availability of types with or without metal shields allows
flexibility of applications and cost reduction.
Side latch -locks
4. Self alignment and self-guiding
Built-in guide posts allow secure self-alignment within
1.5 mm (Fig.2).
5. Secure and complete mating / unmating
Side latch-locks assure and confirm complete and
secure mating of plugs to receptacles while permitting
ease of disconnection (Fig. 3).
With metal shields
(FX15 and FX15S Series)
Without metal shields
(FX15M Series)
6. Enhanced shielding effectiveness
Fig.3
Availability of version with enlarged metal shields
(preventing intrusion or emission of the electromagnetic
interference) further protects the integrity of LVDS signal
(FX15S series, Fig.4)
High Shielding Effectiveness
0
Without metal
7. RoHS compliant
-10
With metal
All components and materials comply with the
reqirements of EU Directive 2002/95/EC.
-20
-30
-40
-50
■Applications
FPD-TV, FPD panels and other applications requiring
secure and reliable connection and transmission signal
integrity.
0.1 0.2 0.3
0.5
1
1.5
2
3
Frequency (GHz)
Fig.4
B273
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■Product Specifications
Current rating
Voltage rating
0.5A
100V AC
Operating temperature range
Storage temperature range
-55ç to +80ç (Note 1)
-10ç to +60ç (Note 2)
Ratings
Item
Specification
Conditions
1. Contact resistance
2. Insulation resistance
3. Withstanding voltage
60 m ohms max. (Note 3)
500 M ohms min.
1 mA
100V DC
No flashover or insulation breakdown.
300V AC/one minute
4. Insertion-Extraction force 0.2N min., 30N max.
5. Durability
With corresponding connector
Contact resistance: 80 m ohms max (Note 3)
50 cycles
.
(mating/un-mating)
6. Vibration
No electrical discontinuity of 1 µs or more.
No electrical discontinuity of 1 µs or more.
Contact resistance: 80 m ohms max.
No damage, cracks, or parts dislocation.(Note 3)
Contact resistance: 80 m ohms max. (Note 3)
Insulation resistance: 500 M ohms min.
Contact resistance: 80 m ohms max. (Note 3)
No corrosions
Frequency: 10 to 55 Hz, single amplitude of 0.76mm, 2 hours, 3 axis
2
7. Shock
Acceleration of 490m/s , 11ms durations, sine half-wave waveform, 3 cycles, 3axis.
8. Humidity
96 hours at 40ç, RH 90% to 95%
9. Temperature cycle
10. Salt spray
Temperature : -55ç ■■+15ç to +35ç ■ +85ç ■ +15ç to +35ç
Time
: 30 ■ 5 ■ 30 ■ 5 (Minutes) 5 cycles
5% water solution for 48 hours.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating temperature range
and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Includes wire conductor resistance (12mm long).
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials and Finishes
■Receptacle
Component
Material
Finish
Remarks
UL94V-0
Insulator
Contact
Polyamide
Color: Black
Contact area: Gold plated
Termination area: Tin plated
FX15S : ---------------
Phosphor bronze
---------------
FX15S : Nickel silver
FX15SC : Stainless steel
Phosphor bronze
Metal shields (with shields)
Metal fittings (without shields)
---------------
---------------
FX15SC : Tin plated
Selective gold flash plated
■Plug
Component
Insulator
Material
Finish
Color: Black
Remarks
UL94V-0
Polyamide
Contact area: Gold plated
Termination area: Tin plated
---------------
Contact
Phosphor bronze
---------------
Metal shields (with shields)
Metal latch-locks (with shields)
Metal shields, metal latch-looks
(micro-coaxial cable)
Nickel silver
---------------
---------------
Stainless steel
---------------
Stainless steel
Nickel plated
---------------
Series Name
Configuration
: FX15
1
2
■Ordering information
Blank : With shields (or crimp contact)
15S : With shields – enhanced shielding
15SC : With shields – enhanced shielding
(PCB mounting pattern : VESA standard)
15M : Without shields
■Receptacle
-
FX15 S 31 S - 0.5 SH
1
2
3
4
5
6
Number of contacts
Connector type
3
4
P
S
: Male contact
: Female contact
: 0.5 mm
■Plug
Contact pitch
5
6
FX15 S - 31 P - C
Housing configuration SH
SV
: Right angle
: Straight
1
2
3
4
7
Termination
C
: Crimp
7
8
■Crimp contact
0.5SD : Micro-coaxial cable
GND : Separate ground plate
2830 : AWG 28 to 30
FX15 - 3032 PCF B
Applicable conductor
1
8
9
10
2
3032 : AWG 30 to 32
Packaging
PCF : Reel/ plug contact
9
Plating (contact area)
B
: Gold plated
10
B274
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■FX15 Series – Mating Diagram
Plugs
Receptacles
Crimp contact
With shields-standard
(FX15-31P-C)
Vertical, with shields
(FX15-31S-0.5SV)
Right angle, with shields
–enhanced shielding
(FX15S-S-0.5SH)
Without shields
(FX15M-P-C)
Crimp contact
(FX15-3032-PCFB)
With shields – enhanced shielding
(FX15S-P-C)
Right angle, without shields
(FX15M-S-0.5SH)
With shields – enhanced shielding
AWG#28 to 30
With shields – enhanced shielding
PCB mouting pattern : VESA standard
(FX15SW-31P-C)
(FX15SC-S-0.5SH)
Crimp contact
(FX15-2830-PCFB)
With shields – enhanced shielding
PCB mouting pattern : VESA standard
Ground plate
(FX15S-P-GND)
Micro-coaxial cable
(FX15S-P-0.5SD)
(FX15SC-S-0.5SV)
Ragarding the availability of the positions, contact your nearest Hirose representative.
B275
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■Plugs
■With shields FX15-31P-C
(
)
(27)
24.6 0.3
22.57 0.15
Polarizing mark
indicator
2.7 0.1
3.7 0.3
18.3 0.3
14 0.15
P=1 0.1
No.2
No.30
No.31
P=1 0.1
15 0.15
No.1
Part number
FX15-31P-C
CL No.
CL575-2101-2
Number of contacts
31
RoHS
YES
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
(
)
■With shields, enhanced shielding FX15S-**P-C
(A)
4
0.3
B
0.3
0.15
Polarizing mark
indicator
C
2.7 0.1
3.7 0.3
D
E
0.3
No.2
No.1
0.15
No.n-1
P=1 0.1
P=1 0.1
No.n
F
0.15
Part number
FX15S-31P-C
FX15S-41P-C
FX15S-51P-C
CL No.
Number of contacts
A
B
C
D
E
F
RoHS
CL575-2106-6
CL575-2107-9
CL575-2103-8
31
41
51
27
32
37
24.6
29.6
34.6
22.6
27.6
32.6
18.3
23.3
28.3
14
19
24
15
20
25
YES
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
B276
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■With shields – enhanced shielding
AWG#28 to 30 (FX15SW-31P-C)
(27)
24.6 0.3
22.57 0.15
4 0.3
Polarizing mark
indicator
2.7 0.1
B
28
18.3 0.3
3.7 0.3
No.2
No.1
No.30
No.31
14 0.15
P=1 0.1
A
P=1 0.1
15 0.15
Part number
CL No.
Number of contacts
31
RoHS
YES
FX15SW-31P-C
CL575-2113-1
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
(
)
■Without shields FX15M-**P-C
(A)
B
0.3
Polarizing mark
indicator
4.2 0.3
C
(D)
0.3
E
0.15
No.2
No.1
No.n-1
No.n
P=1 0.1
P=1 0.1
F
0.15
Part number
FX15M-21P-C
FX15M-31P-C
CL No.
Number of contacts
A
B
C
D
E
F
9
G
RoHS
YES
CL575-2109-4
CL575-2108-1
21
31
24.8
29.8
20.5
25.5
17.6
22.6
13.7
18.7
25.8
30.8
10
15
14
Note 1: Sold in package containing 100 pieces. Order by package.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
B277
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■Plug crimp contacts
Part number
CL No.
Packaging
Reel
Quantity
Finish
RoHS
YES
FX15-2830PCFB
FX15-3032PCFB
CL575-2002-0
CL575-2003-3
20,000 pieces per reel
Gold plated
(
)
■Applicable cable Tin plated solid soft strands
FX15-2830PCFB
Applicable wire size
Jacket diameter
Ø0.56 to 0.72mm
UL No.
(Stranded wire conductor)
AWG #28 (7/0.127 mm)
0.35 0.1
0.72 0.1
1517
1571
AWG #30 (7/0.1 mm)
FX15-3032PCFB
Applicable wire size
(Stranded wire conductor)
AWG #30 (7/0.1 mm)
Jacket diameter
Ø0.5 to 0.6mm
UL No.
1516, 1571(Note)
1571
AWG #32 (7/0.08 mm)
■Wire strip length: 1.1 to 1.8 mm
Note: When using other than the recommended wire, contact
your nearest Hirose representative.
t=0.15 0.05
■Tools
Item
Product number
AP105-FX15-2830
AP105-FX15-3032
CM-105
CL No.
Applicable crimp contact
FX15-2830PCFB
FX15-3032PCFB
–––––––––
901-4036-0
901-4033-1
901-0005-4
Applicator
Press unit
Note: Consult HRS representative when using applicator.
B278
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
(
)
■Plug – Micro-coaxial cable FX15SC-**P-0.5SD
No.1
No.2
No.n
No.n-1
(A)
0.3
0.15
B
C
Polarizing mark
indicator
2.7 0.15
A
No.1
No.n
P=0.5 0.1
D
3.5 0.3
0.15
Part number
CL No.
Number of contacts
A
B
C
D
RoHS
YES
FX15S-41P-0.5SD
FX15S-51P-0.5SD
CL575-2110-3
CL575-2118-5
41
51
31.9
36.9
29.6
34.6
27.57
32.57
20
25
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
■Ground plate for micro-coaxial cable
A
0.2
1.55 0.2
B
0.2
2.2 0.2
Part number
CL No.
Number of contacts
A
B
RoHS
YES
FX15S-41P-GND
FX15S-51P-GND
CL575-2111-6
CL575-2117-2
41
51
29.2
34.2
30.06
35.06
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
B279
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
(
)
■Applicable cable Micro-coaxial cable
Wire size
Jacket diameter
(Standed wire inner conductor)
AWG #36 (7/0.05 mm)
AWG #38 (7/0.04 mm)
AWG #40 (7/0.03 mm)
0.3mm to 0.5mm
Number of contacts
A
B
41
51
23.1
28.1
20
25
■Cable preparation
A
B
0.2
0.15
P=0.5 0.07
0.6 0.1
Inner conductor
Insulator
Gronding bar
Outer conductor
Jacket
AWG#36 to 40 Micro-coaxial cable
B280
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■Receptacles
■Vertical, with shields FX15-31S-0.5SV
(
)
25.7 0.3
19.82 0.2
15 0.15
No.2
No.1
No.30
No.31
P=0.5 0.1
b
a
e
f
c
d
1.5 0.2
1
0.2
1
0.2
1.5 0.2
0.8 0.1
22.8 0.3
Part number
CL No.
Number of contacts
31
RoHS
YES
FX15-31S-0.5SV
CL575-2201-7
BRecommended PCB mounting pattern and metal mask dimensions
22.8 0.05
15 0.05
0.3 0.03(Land)
P=0.5 0.03
0.25 0.03(Metal mask)
2-Ø1(TH)
2
2-Ø1.4(LND)
0
0.9-0.1
4.1+0.1
0
0
17.72 -0.1
21.92 +0.1
0
Note 1 :The co-planarity of the terminal leads is as follows:
• All signals and shield leads “c” and “d”: 0.1mm max.
• Shield leads “a”, “b”, “e” and “f”: 0.15 mm max.
2 : Area indicated by the crosshatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
3 : Packaged on tape-and-reel, 1000 pieces per reel.
4 : Dimensions in parenthesis ( ) are reference dimensions.
B281
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
(
)
■Right angle with shields – enhanced shielding FX15S-**S-0.5SH
A
0.2
0.5 0.1
0.2 0.05
4
No.n
No.2
No.1
(4)
No.n-1
Polarizing mark
indicator
B
0.2
C
0.15
P=1 0.1
P=1 0.1
D
E
0.15
0.3
Part number
HRS No.
Number of contacts
A
B
C
D
E
F
G
H
FX15S-31S-0.5SH CL575-2306-5
FX15S-41S-0.5SH CL575-2307-8
FX15S-51S-0.5SH CL575-2303-7
31
41
51
15
20
25
27.4
32.4
37.4
14
19
24
15
20
25
27.8
32.8
37.8
28.8
33.8
38.8
24.8
29.8
34.8
21.6
26.6
31.6
J
K
L
M
N
P
R
S
RoHS
YES
------
------
18
23
28
15
20
25
13.2
18.2
23.2
16.8
21.8
26.8
24.8
29.8
34.8
40
45
50
5.2
5.2
8.8
8.8
BRecommended PCB mounting pattern and metal mask dimensions
F+0.05
0
0
G -0.05
H+0.05
0
0
J
-0.05
K
0.05
0.3 0.03(Land)
0.25 0.03(Metal mask)
0.5 0.03
0
L-0.05
M +0.05
0
0
N23.2 -0.05
P26.8+0.05
0
3
R
2
S
Note 1 : The coplanarity of the terminal leads is 0.1 mm max. for all signal leads and 0.15 mm max. for the shield leads.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock
operation.
3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
4 : The area marked
indicates vacuum pick-and-place area for board placement with automatic equipment.
5 : Vacuum pick-up area
6 : Packaged on tape-and-reel, 1000 pieces per reel.
7 : Dimensions in parenthesis ( ) are reference dimensions.
B282
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
(
)
■Right angle, without shields FX15M-**S-0.5SH
A
0.2
No.n-1
No.n
No.2
No.1
0.5 0.1
0.2 0.05
Polarizing mark
indicator
(5.5)
Vacuum pick and place area
B
0.2
C
0.15
P=1 0.1
P=1 0.1
6.55 0.3
D
0.15
Part number
HRS No.
Number of contacts
A
B
C
D
E
F
G
RoHS
YES
FX15M-21S-0.5SH
FX15M-31S-0.5SH
CL575-2309-3
CL575-2308-0
21
31
10
15
22.4
27.4
9
10
15
17.9
22.9
10
15
35
40
14
B
Recommended PCB mounting pattern and metal mask dimensions
E
0.05
F
0.05
0.9 0.03
0.3 0.03(Land)
P=0.5 0.03
0.25 0.03(Metal mask)
2
G
Note 1 : The co-planarity of all terminal leads is 0.1 mm max.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and
latch lock operation.
3 : Packaged on tape-and-reel, 1000 pieces per reel.
B283
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
(
)
■Right angle with shields – enhanced shielding FX15SC-**S-0.5SH
PCB mounting pattern : VESA standard
A
B
C
0.3
0.2
0.2
No.1
P=0.5 0.1
0.18 0.05
No.n
1.5 0.1
P=D 0.1
0.5 0.1
Polarizing mark
indicator
E
0.2
F
0.3
G
0.15
P=1 0.1
P=1 0.1
H
0.15
Part number
HRS No.
Number of contacts
A
B
C
D
4
5
E
F
G
H
J
K
RoHS
YES
FX15SC-41S-0.5SH CL575-2310-2
FX15SC-51S-0.5SH CL575-2311-5
41
51
32.85
37.85
26
31
20
25
20
25
32.4
37.4
19
24
20
25
29.75
34.75
45
50
B
Recommended PCB mounting pattern and metal mask dimensions
No.1
B
C
0.05
0.05
No.n
P=0.5 0.03
n-0.25 0.03
2.5 0.05
2.05 0.05
P=D 0.05
6-1.3 0.05
0.05
E
J
3
0.05
K
2
Note 1 : The coplanarity of the terminal leads is 0.1 mm max.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock
operation.
3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
4 : Packaged on tape-and-reel, 1000 pieces per reel.
5 : Dimensions in parenthesis ( ) are reference dimensions.
B284
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
(
)
■Vertical with shields – enhanced shielding FX15SC-**S-0.5SV
PCB mounting pattern : VESA standard
A
B
0.2
0.2
No.n
No.1
0.18 0.05
P=0.5 0.1
1.5 0.1
P=C 0.1
0.5 0.1
D
E
0.2
0.3
4.2 0.2
5.5 0.3
Part number
CL No.
Number of contacts
A
B
C
4
5
D
E
RoHS
YES
FX15SC-41S-0.5SV CL575-2205-8
FX15SC-51S-0.5SV CL575-2204-5
41
51
26
31
20
25
20
25
32.4
37.4
B
Recommended PCB mounting pattern and metal mask dimensions
No.n
A
B
0.05
0.05
No.1
P=0.5 0.3
n-0.25 0.03
2.5 0.05
2
P=C 0.05
6-1.3 0.05
0.05
2.5 0.05
D
A
0.05
Note 1 : The coplanarity of the terminal leads is 0.1 mm max.
2 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
3 : Packaged on tape-and-reel, 1000 pieces per reel.
B285
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■Packaging Specifications
■Vertical, with shields
Unreeling direction
(
)
FX15-31SC-0.5SV
(6.3)
(4.8)
(0.5)
Part number
HRS No.
Number of contacts
31
D
12 0.1
4
0.15
0.1
2
FX15-31S-0.5SV CL575-2201-7
44.5
■Right angle, with shields-enhanced shielding
Unreeling direction
(6.7)
(4.7)
(
)
FX15S-**S-0.5SH
12 0.1
Part number
HRS No.
Number of contacts
A
B
C
D
(0.5)
4
0.1
FX15S-31S-0.5SH CL575-2306-5
FX15S-41S-0.5SH CL575-2307-8
FX15S-51S-0.5SH CL575-2303-7
31
41
51
20.3 40.5 44 44.5
26.3 52.5 56 56.5
26.3 52.5 56 56.5
Right angle, without shields
■
Unreeling direction
(
)
FX15M-**S-0.5SH
(6.5)
Part number
HRS No.
Number of contacts
A
B
C
D
(5.15)
(0.5)
12 0.1
0.1
2
4 0.1
FX15M-21S-0.5SH CL575-2309-3
FX15M-31S-0.5SH CL575-2308-0
21
31
20.2 40.4 44 44.5
20.2 40.4 44 44.5
Reel dimensions
■
(D)
(1.6)
B286
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
■Right angle with shields – enhanced shielding
Unreeling direction
(
)
FX15SC-**S-0.5SH
(6.7)
(0.5)
12 0.1
0.1
2
4 0.1
Part number
HRS No.
Number of contacts
A
B
C
D
RoHS
FX15SC-41S-0.5SH CL575-2310-2
FX15SC-51S-0.5SH CL575-2311-5
41
51
26.2 52.4 56 56.5
26.2 52.4 56 56.5
YES
■Vertical with shields – enhanced shielding
(
)
FX15SC-**S-0.5SV
Unreeling direction
Part number
HRS No.
Number of contacts
A
B
C
D
RoHS
(7)
(0.5)
12 0.1
0.1
4
0.1
2
FX15SC-41S-0.5SV CL575-2205-8
FX15SC-51S-0.5SV CL575-2204-5
41
51
26.2 52.4 56 56.5
26.2 52.4 56 56.5
YES
Reel dimensions
■
(E)
(1.6)
B287
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
BRecommended temperature profile
HRS test conditions
MAX 250ç
Test boardGlass epoxy 40mm∞30mm∞1mm thick
250
Solder method
Solder composition
:Reflow
:Paste,
96.5%Sn/3%Ag/0.5%Cu
: 0.12mm thick
: 2 cycles
230
230ç
180ç
180
150
Metal mask
Reflow cycles
150ç
100
The temperature profile is based on the above
conditions.
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
25
0
90 30sec.
Preheating(150 to 180ç)
30 10sec.
Time (sec.)
Sodering
(230çmin)
Note: The temperature profile indicates the maximum temperature
of the connector surfaces at the highest point from the PCB
mounting surface.
BCleaning recommendations
Organic solvent cleaning
Solvent type
Room temperature cleaning
Heated cleaning
IPA (Isoporopyl alcohol)
YES
YES
YES
YES
HCFC (Hydrochlorofluorocarbon)
Water based cleaning
When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation
issued by the various manufacturers of cleaning agents which describes it’s affects on metals, platings and plastics. Remove any
moisture after cleaning. Residual flux or cleaning agents in the contact areas may affect electrical performance.
B288
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
■Wire termination
The following documents will be needed in order to perform the cable terminations.
1Basic cable termination and crimp requirements (general explanations).
2Contact crimp termination machine instruction manual (Explanation of the press)
3Applicator parts installation table (Applicator installation explanation)
4Crimp conditions table (Crimp height/Tensile strength standard values)
5Crimp quality fundamentals manual (Bell-mouth dimensions, bent up, bent down, rolling, etc.)
* Correct cable preparation and crimp termination is based on understanding and following the procedures in the above documents.
■Insertion of the crimp contacts in the housing
Crimp contacts are inserted in the housing as illustrated below.
Exercising caution when inserting, align the retention tab of the contact with the corresponding molded-in lance in the housing’s contact cavity and
push the contacts in.
Make sure that the contact is fully inserted and the retention tab clears the molded-in lance.
Molded-in lance
Molded-in lance
Molded-in lance
Retention tab facing up
Retention tab
Retention tab facing down
Crimp side
■
Verify that the retention tabs clear the molded-in lances as shown on the illustration below.
Retention tab
Light pull on the wire, with force NOT EXCEEDING 3N will also verify the correct contact insertion.
■Removal of the contacts
Using sharp-pointed tool of appropriate size gently lift the molded-in tab and pull-out the terminated contacts.
Excersize caution as NOT to damage the molded-in lance.
Should the damage occur, the entire housing will need to be replaced.
1
2
B289
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
[
]
Soldering precautions related to FX15S-**P-C connectors
■Grounding Methods of the ground wire or shields for the cable assemblies
1Solder the ground wire or the shields ONLY in the areas specifically designated for this purpose, as shown on the illustrations below.
2Observe the soldering iron tip temperature and soldering time specified.
3Do not apply excessive force to the connector by pressing it with the tip of a soldering iron.
4Do not splatter the flux from the solder core.
Soldering area 2
Soldering area 1
B
B
(Ground harness examples)
B290
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
■Plug – micro-coaxial cable
[
]
Coutions for soldring
1. For the micro coaxial cable assembled to this connector, cable alignment process as shown in "Recommended cable" on the page 1 is required
before assembly.
1Width of ground bar shall be 1.05 mm Max. including misalignment of overlapping, flush by cutting, side drop or soldering.
Using an inadequate cable will interfere the assembly to the connector. Forceful assembly and soldering could cause mis-soldering to defective
product.
2Minimize the length of outer conductor beyond the ground the bar.
Inner conductor
rSolder coating
3Length of cutting the extra cable shall be 2.1 mm Max.
Its over length will cause the cable touching the connector body
during assembly and cause defective product.
Grounding bar
Minimal length 2.0 mm is a recommended dimension and allowed
to be changed if necessary, as long as ensuring good solderability.
4Pre-solder and coat the inner conductor at the cable end.
Outer conductor
2. Recommended solder for the assembly is flux cored solder with 0.2
mm dia. (Lead-free: Sn-3Ag-0.5Cu), 21 mm length.
If you consider using additional flux, please pay enough attention not
to have flux wicking to the contact area.
Flux wicking to the contact area will cause contact failure.
3. Place the cable to the connector and check the below points before
soldering by cable assembly machine.
1Misalinment of cable end to the terminals in pitch direction
2Excessive floating of cable end
4. Follow the recommended temperature profile shown below for the
soldering.
qMisalignment in pitch direction
wfloating
However, the optimum condition could vary depending on various including type of cable and its length, solder type. Therefore refer to the
recommended temperature profile and optimize the condition if necessary.
Heating
265ç
Solder tip
pressurization
Pre-heating
13~17N
250ç
220ç
Heating
50ç
Idling
Temperature
265 5ç
3~4 sec
Duration
2s
1s
2s
3-4s
Duration of pressure application
B291
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
5. After soldering, check that no defect is found at soldered area.
Examples of correct soldered and defective soldered state are shown below.
Solder shortage
A
B
solder bridge
AA
BB
A
B
Floating
Correct soldering
[
]
Coutions for potting process
1. Protect the soldered area by UV cured resin (referred as "potting" hereafter), in order to prevent cable breakage during cabling and other troubles.
2. Apply 3033 manufactured by THREEBOND CO., LTD. or any equivalent product for potting.
Follow the instruction of potting manufacture's for the condition of UV exposure.
3. Refer to the following conditions the potting area.
Number of contacts
A
41
51
23.7
28.7
0
0
1.25 -0.75
A -3
A
Enlarged view
4. Use extreme care for the handling after solding to the end potting process not to apply stress to the cable, otherwise, cable could be broken.
B292
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
[
]
Coutions for ground plate assembly
1. Attach a ground plate separately provided as FX15S-41P-GND after the cable assembly process.
2. Place the ground plate onto the connector horizontally and pinch two components from top and bottom with fingers.
Pinch from top and bottom with fingers
A
Ground plate
(FX15S-41P-GND)
A
wHorizontally
ePinch with fingers
qAssembly
from the top
3. Check the six fitting points after assembly and make sure that they are all correctly fitted together.
How to check fitting points
(Cut section of fitting points)
Fitting
Fitting
Fitting
Fitting
A
Ground plate hooks the
protrusion of connector housing
Ground plate does not hook the
protrusion of connector housing
Fitting
Fitting
NG
OK
[
]
Soldering to ground plate
1. Solder down the metal bar of the cable and ground plate after the assembly of ground plate in order to enhance the grounding performance and
robustness against cable stroke to up and down direction.
Soldering
Soldering
A
B293
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
■Packaging of the complete cable assemblies
Exercise caution as not to tangle, twist or deform the complete cable assemblies when packaging. Special care should be taken NOT to apply any
excessive pull forces to the individual wires.
When removing the cable assemblies from the packaging do not pull on the wires. Make sure that the latch-locks are not interfering with packaging.
Packaging
Connectors
■Mating of the connectors
The connectors have built-in polarizing feature and will NOT mate when reversed. Do NOT try forced mating.
Align the connectors as shown on the illustration below and fully insert the plug into the receptacle. Confirm that both latch-locks are fully engaged.
Triangle mark
Triangle mark
Arrow mark
Mating
Mating
Center mark
Center mark
B294
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
Precautions and recommendations
■Handling of Connectors after Mating
Do not to apply excessive forces to the connectors when routing the cable after mating.
Pulling on the entire cable with a force of 20 N or greater can damage the connector. Please take due care not to pull the cable.
■Un-mating of the connectors
Depress equally both sides of the latch-locks as shown on the illustration and pull the plug straight out. Do not pull on the cables!
B
B
1
Press
1
Press
1
Press
1
Press
2Pull straight apart
Lock latches
B
B
B295
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15 Series■1mm Pitch Cable-to-Board Connectors supporting LVDS signal
(
)
BTechnical Information FX15S Series
■
(
)
Eye Pattern Waveforms 700 MHz
1 m Cable Length
1.5 m Cable Length
(
)
Shielding Effectiveness Shielding Characteristics Comparison Using a 2-chamber Shielded Room
■
Measured shielding effectiveness for frequencies from 100 MHz to 2 GHz.
Shielded connectors show noise suppression of 10 db to 20 dB, when compared with connectors without the shields.
60
With cable-side shields + With PCB-side shields
50
With cable-side shields + Without PCB-side shields
40
Without cable-side shields + With PCB-side shields
30
20
10
0
Without cable-side shields + Without PCB-side shields
■ (0 dB line)
-10
0.1
0.15
0.2
0.3
0.4
0.5 0.6 0.7 0.8 0.9 1
1.5
2
Frequency (GHz)
Notes:The measurement value of "Without plug-side shields + Without receptacle-side shields” are taken
as the zero level of the graph vertical axis dB.
The respective results express the noise suppression effect (dB) as a relative comparison value
with this "without shields” condition as the reference.
B296
相关型号：
©2020 ICPDF网 联系我们和版权申明