GBM-9000F [ETC]
5V / 850 nm / 2.125 Gb/s Multi-Mode Gigabit Interface Converter (GBIC); 5V / 850纳米/ 2.125 Gb / s的多模千兆位接口转换器（ GBIC ）
| 型号： | GBM-9000F |
| 厂家： | 
ETC |
| 描述： | 5V / 850 nm / 2.125 Gb/s Multi-Mode Gigabit Interface Converter (GBIC) |
| 文件： | 总4页 (文件大小：84K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Optoway
GBM-9000F
*******************************************************************************************************************************************************************************
GBM-9000F
5V / 850 nm / 2.125 Gb/s Multi-Mode Gigabit Interface Converter (GBIC)
******************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
lUp to 2.5 Gbps Bi-directional Data Links
lCompliant with 1X / 2X Fibre Channel FC-PI 13.0
lCompliant with Gigabit Interface Converter (GBIC)
Specification Rev. 5.5
The GBM-9000F series optical transceivers meet the Gigabit
Interface Converter (GBIC) specification Rev. 5.5. It satisfies the
optical interface specifications defined in IEEE 802.3z Drift 5.0
1000 BASE-SX for Gigabit Ethernet and 1x / 2x Fibre Channel
FC-PI 13.0. This module is designed for multi-mode fiber and
operates at a nominal wavelength of 850 nm. The transmitter
section uses a multiple quantum well VCSEL and is a class 1
laser compliant according to International Safety Standard IEC-
60825. The receiver section uses an integrated GaAs detector
preamplifier (IDP) mounted in an optical header and a limiting
post-amplifier IC. A PECL input / output logic interface is used.
TTL RX-LOS output simplifies interface to external circuitry. A
20-pin SCA-2 host connector is used to connect the converter to
the host system.
l850 nm VCSEL Laser Transmitter
lHot Pluggable module with Duplex SC Connector
lMulti-rate Operation for 2.5 / 2.125 / 1.062 / 1.25 Gbps
lLink Distance at 2.125 Gbd
150 m links with 62.5/125 mm MMF Cables
300 m links with 50/125 mm MMF Cables
lLink Distance at 1.026 Gbd
300 m links with 62.5/125 mm MMF Cables
550 m links with 50/125 mm MMF Cables
lSCA-2 Host Connector
lSingle +5 V Power Supply
lDifferential PECL Inputs and Outputs
lTTL RX-LOS Output
lClass 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies
with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The
transceiver must be operated within the specified temperature and
voltage limits. The optical ports of the module shall be terminated
with an optical connector or with a dust plug.
APPLICATIONS
lSwitch to Switch Interface
lHigh Speed Interface for File Servers
lData Storage
lDual Rate 1.06 / 2.125 Gb/s Fibre Channel
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
Distance Wavelength Voltage Connector
Temp.
(oC)
TX Power RX Sens.
1000
BASE
SX
(m)
(nm)
(V)
(dBm)
(dBm)
GBM-9000F
GBM-9100F
2.125/1.063
2.125/1.063
150/300*
150/300*
850
850
5
3.3
SC
SC
0 to 70
0 to 70
-4 to -9.5
-4 to -9.5
-17
-17
SX
* At 2.125Gb/s: 150 m using 62.5 m MMF optic cable; 300 m using 50 m MMF optic cable
m
m
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
Vcc
Min
-40
-5
-0.5
-0.5
Max
85
70
6
Vcc
Units
oC
Notes
oC
Air flow 1m/sec
V
V
---
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Symbol
Vcc
ITX + IRX
Min
4.75
Typ
5
200
Max
5.25
300
Units
V
mA
Conditions
Reference to GND.
Operating Temperature
Data Rate
Topr
0
70
oC
Gb/s
Air flow 1m/sec
1.0625 / 1.25
2.125 / 2.5
550
300
300
150
m
m
@1.0625 Gb/s
@2.125Gb/s
@1.0625 Gb/s
@2.125Gb/s
Fiber Length on 50/125 mm
500MHz-km Fiber
Fiber Length on 62.5/125 mm
200MHz-km Fiber
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2003 V1.0
Optoway
GBM-9000F
******************************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Po
l
-9.5
830
---
850
---
-4
860
0.85
---
dBm
nm
1
nm
dB
RMS (σ)
Dl
ER
9
Optical Modulation Amplitude
(Peatk-to-Peak)
OMA
196
mW
FC-PI Standard
Optical Rise Time
tr
150
150
-117
-35
ps
ps
dB/Hz
dBm
20% to 80% value
20% to 80% value
Optical Fall Time
tf
RIN
POFF
Relative Intensity Noise
Pout TX_Disable Asserted
Electrical
Differential Input Voltage
Transmit Fault Load
VIH - VIL
TX-FAULTLOAD
VTX-FAULT-L
VTX-FAULT-H
VTX-DISABLE-L
VTX-DISABLE-H
t_off
0.65
4.7
0.0
2.0
10
0.5
Vp-p
kΩ
V
2
Transmit Fault Output-Low
Transmit Fault Output-High
TX-Disable Input - Low
TX-Disable Input - High
TX-Disable Assert Time
TX-Disable Negate Time
Time to initialize, includes reset of
TX-FAULT
Vcc – 0.5
0
Vcc + 0.3
0.8
Vcc + 0.3
10
V
V
V
2.0
ms
ms
ms
t-on
1
t-int
300
s
m
TX FAULT from fault to assertion
TX-Disable time to start reset
t-fault
t-reset
100
10
ms
1. Output power is power coupled into a 62.5/125 mm or 50/125 mm MM fiber.
2. Pull-up resistor on host Vcc.
Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity @ 1.25Gb/s @ BER=10-12
Sensitivity @ 2.125Gb/s @ BER=10-12
Maximum Input Power
Sens (1X)
Sens (2X)
Pin
---
---
-18
-17
---
dBm
dBm
dBm
dB
3
3
3
-3
1.0
820
---
Signal detect – Hysteresis
Wavelength of Operation
RX-LOS – Asserted
---
---
---
---
860
-17
---
nm
Pa
Pd
dBm
dBm
Transition: low to high
Transition: high to low
RX-LOS – Deasserted
-31
Electrical
Differential Output Voltage
Data Output Rise Time
±RX-DAT
TrRX-DAT
0.37
2.0
0.35
0.35
10
Vp-p
ns
TfRX-DAT
Data Output Fall Time
ns
Receiver Loss of Light Load
Loss of Signal Output Voltage --- Low
Loss of Signal Output Voltage --- High
Loss of Signal Assert Time (off to on)
Loss of Signal Deassert Time (on to off)
RX-LOSLOAD
RX-LOSL
RX-LOSH
TA,RX-LOS
TD,RX-LOS
4.7
0
kΩ
V
4
0.8
2.4
Vcc
100
100
V
s
m
ms
3. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS.
4. Pull-up resistor on host Vcc.
******************************************************************************************************************************************************************************
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
OPTOWAY TECHNOLOGY INC.
Tel: 886-3-5979798
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
Fax: 886-3-5979737
12/1/2003 V1.0
Optoway
GBM-9000F
******************************************************************************************************************************************************************************
PIN ASSIGNMENT
PIN
Signal Name
Sequence
Description
RX-LOS
2
1
Receiver Loss of Signal, logic high, open collector compatible,
4.7K to 10K ohm pull-up to VCCT on host
Receiver Ground
RGND
2
2
2
2
2
2
2
2
2
2
3
4
RGND
Receiver Ground
TTL Low
MOD-DEF(0)
MOD-DEF(1)
MOD-DEF(2)
TX-DIABLE
TGND
5
6
SCL Serial Clock Signal
SDA Serial Data Signal
7
8
Transmitter Disable, logic high, open collector compatible
Transmitter Ground
TGND
9
Transmitter Ground
TX-FAULT
10
Transmitter Fault, logic high, open collector compatible, 4.7K to
10K ohm pull-up to VCCT on GBIC
Receiver Ground
RGND
1
1
1
1
2
2
1
1
1
1
11
12
13
14
15
16
17
18
19
20
-RX-DAT
+RX-DAT
RGND
Receiver Data Bar, Differential PECL, AC coupled
Receiver Data, Differential PECL, AC coupled
Receiver Ground
VCCR
Receiver +5V Supply
Transmitter +5V Supply
VCCT
TGND
Transmitter Ground
+TX-DAT
-TX-DAT
TGND
Transmitter Data, Differential PECL, AC coupled
Transmitter Data Bar, Differential PECL, AC coupled
Transmitter Ground
A sequence value of 1 indicates that the signal is in the first group to engage during plugging of a module. A sequence value of 2
indicates that the signal is the second and last group. The two guide pins on the connector are electrically connected to the transceiver circuit
ground. These two guide pins make contact with circuit prior to sequence 1 signals.
Module Definition
Module Definition
MOD-DEF(0)
PIN 4
MOD-DEF (1)
PIN 5
MOD-DEF (2)
PIN 6
Interpretation by
Host
4
TTL Low
SCL
SDA
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
******************************************************************************************************************************************************************************
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
OPTOWAY TECHNOLOGY INC.
Tel: 886-3-5979798
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
Fax: 886-3-5979737
12/1/2003 V1.0
Optoway
GBM-9000F
******************************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
******************************************************************************************************************************************************************************
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
OPTOWAY TECHNOLOGY INC.
Tel: 886-3-5979798
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
Fax: 886-3-5979737
12/1/2003 V1.0
相关型号：
©2020 ICPDF网 联系我们和版权申明