GPB970T11Z [ETC]
Photologic® Slotted Optical Switch OPB960, OPB970, OPB980, OP990 Series; Photologic®槽形光学开关OPB960 ， OPB970 ， OPB980 ， OP990系列
| 型号： | GPB970T11Z |
| 厂家： | 
ETC |
| 描述： | Photologic® Slotted Optical Switch OPB960, OPB970, OPB980, OP990 Series |
| 文件： | 总7页 (文件大小：645K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
L
Features:
N
T
•
•
•
•
•
•
Data rates to 250 kBaud
24” minimum 26 AWG wire leads
Choice of output configuration
Choice of opaque or IR-transmissive shell material
Choice of aperture
P
Choice of mounting configuration
Description:
The OPB960, OPB970, OPB980 and OPB990 series of Photologic® photo integrated circuit switches provide
optimum flexibility for the design engineer. Building from a standard housing with a 0.125” (3.180 mm) wide slot, a
user can specify the type and polarity of TTL output, discrete shell material, aperture width and choice of mounting
configurations. OPB960 through OPB973 have 0.425” (10.795 mm) PCBoard leads with 0.320” (8.1 mm)
spacing. OPB980 through OPB993 have 24” (609 mm) 26 AWG wires.
All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be
specified as buffered or inverted with Totem-Pole or Open Collector output. Devices are also TTI/LSTTL
compatible and can drive up to 10 TTL loads.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
•
•
Mechanical switch replacement
Speed and direction indication
•
•
Mechanical limit indication
Rotary encoders
•
•
Edge sensing
Sliding Door Automotive and Liftgate applications
Part Number Guide — OPB980 and OPB990 Series
OPB 9 X X X X X Z
OPTEK Assembly
All PCBoard Versions RoHS Compliant:
Z = Wire Version RoHS Compliant
Photologic™ Pnoto Integrated
Circuit Sensor Family
Sensor Aperture:
1 = 0.010” [0.25 mm]
5 = 0.050” [1.27 mm]
Discrete Housing Material:
6 — Base mount IR transmissive plastic discrete
shell with PCBoard lead termination
7 — Base mount opaque plastic discrete shell
with PCBoar lead termination
Emitter Aperture:
1 = 0.010” [0.25 mm]
5 = 0.050” [1.27 mm]
8 — Base mount IR transmissive plastic discrete
shell with wire termination
9 — Base mount opaque plastic discrete shell
with wire termination
Mounting Configurations:
L — Emitter side mounting tab only
N — No mounting tabs
P — Sensor-side mounting tab (Photologic side)
T — Two mounting tabs
Electrical Specifications:
0 — Buffered Totem-Pole Output
1 — Buffered Open-Collector Output
2 — Inverted Totem-Pole Output
3 — Inverted Open-Collector Output
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
RoHS
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 10/06
Page 1 of 7
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
OP960, OP970 Series
Color-Pin Description
Red-1
Black-2
Green-5
Blue-4
Anode
Cathode
Ground
Output
Vcc
White-3
OP980, OP990 Series
[ MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using
ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural
failure in OPTEK’s molded plastics.
Applies to: OPB460, OPB470, OPB480, OPB490.
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
Issue B 10/06
Page 2 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
Totem-Pole-Output
Open-Collector-Output
Inverted Totem-Pole
Inverted Open Collector
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage Temperature Range
-40°C to +85° C
-40°C to +70° C
18 V
Operating Temperature Range
Supply Voltage VCC (not to exceed 3 seconds)
Input Diode Power Dissipation
100 mW(1)
Output PhotologicTM Power Dissipation
Total Device Power Dissipation
200 mW(2)
300 mW(3)
35V
Voltage at Output Lead (Open Collector Output)
Diode Forward D.C. Current
40 mA
2 V
Diode Reverse D.C. Voltage
Notes:
(1) Derate linearly 2.22 mW/°C above 25° C.
(2) Derate linearly 4.44 mW/°C above 25° C.
(3) Derate linearly 6.66 mW/°C above 25° C.
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 10/06
Page 3 of 7
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
Electrical Characteristics (TA = -40°C to + 70°C, VCC = 4.5V to 16.0V unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP MAX UNITS
TEST CONDITIONS
Input Diode (See OP240 for additional information)
VF
IR
Forward Voltage
Reverse Current
-
-
-
-
1.7
V
IF = 20 mA, TA = 25° C
100
µA
VR = 2.0 V, TA = 25° C
Output Photologic® Sensor (See OPL560 series for additional information)
VCC
VR(P-P)
ICC
Operating D.C. Supply Voltage
4.5
-
-
16.0
2.0
12
V
V
-
f = DC to 50 MHz
VCC = 4.5V to 16.0V
Peak-to-Peak VCC voltage ripple
necessary to cause false triggering
-
-
Supply Current
8
mA
Low Level Supply Voltage:
Totem-Pole
IOL = 12.8 mA, IF = 0 mA
IOL = 12.8 mA, IF = 0 mA
IOL = 12.8 mA, IF = 15 mA(5)
IOL = 12.8 mA, IF = 15 mA(5)
VOL
Open-Collector
Inverted Totem-Pole
Inverted Open-Collector
-
-
-
-
0.4
V
V
High Level Output Current:
Totem-Pole
IOH = -1 µA, IF = 15 mA
IOH = -1 µA, IF = 15 mA
IOH = -1 µA, IF = 0 mA(5)
IOH = -1 µA, IF = 0 mA(5)
VOH
Open-Collector
Inverted Totem-Pole
Inverted Open-Collector
VCC-2.1
-
High Level Output Current:
Totem-Pole
VOH = 30 V, IF = 15 mA, TA = 25° C
VOH = 30 V, IF = 15 mA, TA = 25° C
VOH = 30 V, IF = 0 mA(5), TA = 25° C
VOH = 30 V, IF = 0 mA(5), TA = 25° C
IOH
Open-Collector
Inverted Totem-Pole
Inverted Open-Collector
-
100
µA
IF(+)
LED Positive-Going Threshold Current
-
-
-
15
-
mA
V
VCC = 5.0 V, TA = 25° C
VCC = 5.0 V
IF(+), IF(-) Hysteresis
Short Circuit Output Current:
2.0
IOS
Totem-Pole
Inverted Totem-Pole
VCC = 5.25 V, IF = 15 mA, VOH = GND
VCC = 5.25 V, IF = 0 mA(5), VOH = GND
-15
-
-60
mA
ns
trtr
Output Rise Time, Output Fall Time
-
-
70
5.0
-
-
VCC = 5 V, TA = 25° C, IF = 0 or 15 mA
Propagation Delay Low-High,
Propagation High-Low
RL = 8TTL loads (Totem Pole),
RL = 360 Ω (Open-Collector)
TPLH, TPHL
Notes:
µs
(1) The OPB880/OPB890 series switches are terminated with 24” (609.600 mm) of 7-strand 26 AWG, UL 1429 insulated wire on each
terminal. Insulation colors and functions are: Anode (red), cathode (black), VCC (white), output (blue), and ground (green). Custom
wire lengths and/or colors are available. Contact your local representative or OPTEK for details.
(2) Normal application would be with light source blocked, simulated by IF = 0 mA.
(3) All parameters are tested using pulse techniques.
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
Issue B 10/06
Page 4 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
"55" Aperture - Flag Next to Emitter
1.2
"55" Aperture - Flag Next to Sensor
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to Bottom (Back)
Top to Bottom
Top to Bottom (Back)
Top to Bottom
1.0
0.8
0.6
0.4
0.2
0.0
Right to Left
Right to Left
Right to Left (Back)
Right to Left (Back)
Left to Right
Left to Right
Left to Right (Back)
Left to Right (Back)
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
Displacement Distance (inches)
"55" Aperture - Flag in Middle of Slot
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to Bottom (Back)
Top to Bottom
Top to Bottom
0
Right to Left
Right to Left (Back)
Emitter
Left to Right
Right to Left
Left to Right
Sensor
Left to Right (Back)
0
Width
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 10/06
Page 5 of 7
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
"51" Apertures - Flag Next to Emitter
1.2
"51" Aperture - Flag Next to Sensor
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to Bottom (Back)
Top to Bottom
Top to Bottom (Back) Top to Bottom
1.0
0.8
0.6
0.4
0.2
0.0
Right to Left
Right to Left
Right to Left (Back)
Right to Left (Back)
Left to Right
Left to Right
Left to Right (Back)
Left to Right (Back)
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
Displacement Distance (inches)
"51" Aperture - Flag in Middle of Slot
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to Bottom (Back)
Top to Bottom
Top to Bottom
0
Right to Left
Right to Left (Back)
Emitter
Left to Right
Right to Left
Left to Right
Left to Right (Back)
Sensor
0
Width
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
Issue B 10/06
Page 6 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
"11" Aperture - Flag Next to Emitter
1.2
"11" Aperture - Flag Next to Sensor
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to Bottom (Back)
Top to Bottom
Top to Bottom (Back)
Top to Bottom
1.0
0.8
0.6
0.4
0.2
0.0
Right to Left
Right to Left
Right to Left (Back)
Right to Left (Back)
Left to Right
Left to Right
Left to Right (Back)
Left to Right (Back)
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
Displacement Distance (inches)
"11" Aperture - Flag in Middle of Slot
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to Bottom (Back)
Top to Bottom
Top to Bottom
0
Right to Left
Right to Left (Back)
Emitter
Left to Right
Right to Left
Left to Right
Left to Right (Back)
Sensor
0
Width
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 10/06
Page 7 of 7
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 202
-
VISHAY
©2020 ICPDF网 联系我们和版权申明