HBL1390 [ETC]
Manual Motor Controllers and Disconnects;型号: | HBL1390 |
厂家: | ETC |
描述: | Manual Motor Controllers and Disconnects |
文件: | 总12页 (文件大小:891K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
®
®
CIRCUIT-LOCK and MOTORQUICK
Wiring Devllems
Manual Motor Controllers and Disconnects
A Safety-First Priority
www.hubbell-wiring.com
Hubbell’s Circuit-Lock® Manual Motor Controllers
"Suitable as Motor Disconnects"
Hubbell manufactures one of the most complete lines of motor disconnects on the market. Designed to ensure
maximum reliability and performance, Hubbell Circuit-Lock® motor controllers meet or exceed all industry requirements.
Because our Circuit-Lock® motor controllers are also disconnects, they ensure safety, compliance, flexibility and
productivity for today’s industrial and commercial environments. Whether controlling motor loads, safely terminating
power or isolating equipment, Hubbell has the solution for you—no matter what the environment or application.
Hubbell
Flexibility
Hubbell
Productivity
Circuit-Lock® keeps assembly
lines, goods and services
moving. By offering a dual
motor controller-disconnect
rating, power can be safely
terminated at any point in the
circuit to perform maintenance
on a single motor without
shutting down the entire
line. With the plug-and-play
LINKOSITY® power system,
MotorQuick® reduces motor
change-out time by more than
65% to get equipment up and
running faster.
With Hubbell’s wide range
of Circuit-Lock® motor
controllers and disconnects
that offer several mounting
options, NEC® line of sight
requirements are easily
achieved at the equipment
or on the wall in virtually
any industrial environment.
Switches with a compact
footprint, a variety of
Hubbell
NEMA® type enclosures
and plug-and-play
Hubbell
Safety
Safety of personnel and
equipment is paramount
in any manufacturing
Compliance
LINKOSITY® make switch
placement easier and
more flexible than ever.
Compliance with codes
and regulations is a must in
any industrial environment.
Hubbell motor controllers
meet a variety of
environment. Hubbell
Circuit-Lock® motor
requirements, including
OSHA lockout/tagout,
NSF certification for
hygiene and hazardous
location ratings. Each
Circuit-Lock® motor
controller is UL listed
as “Suitable as Motor
Disconnect”. The NEC®
allows for the disconnect
and controller to be in
one unit.
controllers withstand
short circuits and provide
a high degree of safety
across the factory floor.
Disconnect Switches for
Variable Frequency Drives
(VFDs) safely terminate
power to prevent risk of
injury and damage to high-
performance output devices
used for controlling today’s
conveyor systems.
Variable Frequency Disconnects
Each Controller is Also a Disconnect
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
2
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
Circuit-Lock® Non-Metallic Disconnect Switches, MotorQuick® ans
Non-metallic disconnect switches control motor loads in wet or
corrosive environments, while MotorQuick® provides faster motor
change-outs and VFD switches reduce equipment damage and
stress on electrical systems.
Fused and Unfused Non-Metallic
Disconnect Switches ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ Page 4
MotorQuick® and VFD Switches ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ Page 5
Stainless Steel, Hazardous Location Disconnects and Mechanical Interlocks
Stainless steel disconnect switched enclosures are ideal for
withstanding harsh environments, while hazardous location
disconnects prevent explosion hazards where flammable gases
and combustible particles are present.
NEMA 4X Stainless Steel Disconnect Switches ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ Page 6
Hazardous Location Disconnects and
Mechanical Interlocksꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ Page 7
IEC and Insulgrip® Pin and Sleeve; Twist-Lock® Mechanical Interlocks
Hubbell’s line of mechanical interlocks provide a horsepower rated
receptacle and a means of disconnect for a variety of portable
equipment, while eliminating the possibility of making lazy
connections or breaking circuits under load.
IEC and Insulgrip® Pin and Sleeve
Mechanical Interlocksꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ Page 8
Watertight Safety-Shroud® Twist-Lock®
Mechanical Interlocksꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ Page 9
600V AC Manual Motor Controllers/Disconnects and Enclosures
Motor loads in industrial environments are easily disconnected with
Hubbell’s complete line of AC manual motor controllers/disconnects,
available in a wide variety of enclosure types including NEMA® 1, 3R
or 4X.
AC Manual Motor Controllers/Disconnectsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ Page 10
Enclosed AC Manual Motor Controllers/Disconnectsꢀ ꢀ ꢀ ꢀ ꢀ ꢀPage 11
Horsepower Ratingsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ Page 12
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
www.hubbell-wiring.com
3
For complete listing of Hubbell Products see our full line catalog.
Circuit-Lock® Non-Metallic Disconnect Switches
"Suitable as Motor Disconnects"
Hubbell Circuit-Lock® Non-Metallic Disconnect Switches
comply with both the controller and disconnect requirements
of the NEC®, making them ideal for meeting line-of-sight
requirements in a variety of industrial environments. They
feature a high visibility red handle that can be locked in
the "OFF" position to comply with OSHA lockout/tagout
regulations. For maximum reliability, the external stainless steel
hardware and rugged enclosure resist abuse and corrosion,
while a neoprene gasket ensures a watertight seal.
• Heavy duty, corrosion resistant Type 4X Valox® enclosure
• Superior safety—switches can only be turned ON with
the cover closed
• Easy installation with adjustable mounting feet and
fully removable covers
• Fused disconnect switches accept Class "J" fuses
• Unfused units are NSF Certified
FDS30
HBLDS3
Fused Disconnect Switches
3 Pole 600V AC
Amp Description
Catalog Number
FDS30*
30
60
Circuit-Lock fused disconnect switch.
Circuit-Lock fused disconnect switch.
FDS60*
Auxiliary contact, normally open, A600 pilot duty.
Auxiliary contact, normally closed, A600 pilot duty.
ACFSNO
ACFSNC
FDS60
Unfused Disconnect Switches in Non-Metallic Enclosure**
3 Pole 600V AC
Amp Description
Catalog Number
HBLDS3
Circuit-Lock disconnect switch.
Circuit-Lock disconnect switch with HBLAC1 auxiliary contact.
Circuit-Lock disconnect switch with HBLAC2 auxiliary contact.
HBLDS3AC
HBLDS3AC2
HBLDS3NK
HBLDS3ACNK
ACFSNO
Circuit-Lock disconnect switch without conduit knockout or conduit fitting.
30
Circuit-Lock disconnect switch with HBLAC1 auxiliary contact without conduit
knockout or conduit fitting.
Circuit-Lock disconnect switch with 3 auxiliary contacts, w/o conduit knockouts.
Break before main break – 1 set “normally open”, 1 set “normally closed”.
Break after main break – 2 sets “normally open”, 1 set “normally closed”.
HBLDS33ACNK
Circuit-Lock disconnect switch.
HBLDS6
60
Circuit-Lock disconnect switch with HBLAC1 auxiliary contact.
Circuit-Lock disconnect switch.
HBLDS6AC
HBLDS10
HBLDS10AC
HBLAC1
HBLDS3
100
Circuit-Lock disconnect switch with HBLAC1 auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts, 1 set of n/c contacts.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
Note: *Class “J” fuses not included.
**Certified by NSF, International.
HBLAC1
HBLAC2
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
4
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
MotorQuick® and Variable Frequency Drive (VFD) Switc
Plug and Play Technology
MotorQuick® combines the plug-and-play technology of Hubbell’s
LINKOSITY® power system with the versatility of Circuit-Lock® motor
disconnect switches to drastically reduce the time it takes to replace
motors. These quick disconnect switches feature lockable handles to
meet OSHA lockout/tagout regulations and include pre-wired LINKOSITY
receptacles to meet a variety of application needs. The quick disconnect
LINKOSITY terminations, combined with the ability to conveniently
pre-wire spare motors with a LINKOSITY inlet without shutting down
the entire line, reduces motor change-out time by more than 65%.
The result is equipment up and running in a fraction of the time
providing productivity and bottom-line savings.
• Plug and play design allows for faster installation
• Reduces motor change-out time by more than 65%
• Crush and impact resistant MC cables
Quick Disconnect Switches
30A 3 Pole 600V AC
Type 1 Non-Metallic Enclosure
Catalog Number
HBL1389MQR
HBL1389MQ5
HBL1389MQR2
HBL1389D with one pre-wired LINKOSITY® female receptacle (load side).
HBL1389D with 5 foot pre-wired LINKOSITY® female cable (load side).
HBL1389D with one pre-wired LINKOSITY® male receptacle (line side) and
one pre-wired LINKOSITY® female receptacle (load side).
HBL1389MQ5
HBL1389MQR2
Type 4X Non-Metallic Enclosure
HBLDS3 with one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3 with 5 foot pre-wired LINKOSITY® female cable (load side).
HBLDS3MQR
HBLDS3MQ5
HBLDS3MQR2
HBLDS3 with one pre-wired LINKOSITY® male receptacle (line side)
and one pre-wired LINKOSITY® female receptacle (load side).
Note: See page 6 for stainless steel option.
Accessories
Description
HBLDS3MQ5
HBLDS3MQR
Catalog Number
RM3004PA001
PH3004PAxxx*
PH2030C
3P 4W LINKOSITY® male receptacle for installation on motor.
3P 4W LINKOSITY® double ended (male/female) 5-50 foot cable.
Lock-on cover for LINKOSITY® connections.
Note: *Cables available from 5-50 feet in 5 foot increments. To purchase larger cable, replace the xxx with the required
length in feet. (Examples: PH3004PA005 = 5 foot cable, PH3004PA015 = 15 foot cable.)
Hubbell's Disconnect Switch for Variable Frequency Drives
(VFDs) prevents downtime from out-of-sequence equipment
shutdowns when using VFDs, the most common method
of controlling conveyor system motors. The HBLDS3VFD
integrates an early-break auxiliary contact installed in the
HBLDS3 30 Amp disconnect switch enclosure. The contact
interfaces directly with VFDs to execute a coast-to-stop,
preventing damage to the disconnect switch and high-
performance VFD output devices.
• Thoroughly tested for effective use with VFDs
• Powers down the drive prior to opening the motor disconnect
• Prevents damage to the disconnect switch and the VFD
Unfused Disconnect Switches
30A 3 Pole 600V AC
Description
Catalog Number
Non-Metallic enclosure, Circuit-Lock disconnect switch for use with
variable frequency drives.
HBLDS3VFD
HBLDS3VFD
HBLDS3SSVFD
Stainless Steel enclosure, Circuit-Lock disconnect switch for use with
variable frequency drives.
HBLDS3SSVFD
www.hubbell-wiring.com
5
For complete listing of Hubbell Products see our full line catalog.
Disconnect Switches in Stainless Steel Enclosure
"Suitable as Motor Disconnects"
Hubbell’s stainless steel disconnect switch has been certified by
NSF International for hygiene applications in food and beverage
processing. These switched enclosures are designed for harsh
environments to withstand exposure to water, chemicals, oils and
frequent wash-downs. They feature 304 Series Stainless Steel
and are UL listed Type 4X and 12 with a high visibility red handle
that can be locked in the "OFF" position for compliance with
OSHA lockout/tagout regulations. The DIN-rail mounted switch
accommodates up to two auxiliary contacts for control circuit
applications.
• Certified by NSF for hygiene in food processing applications
• Cover is embossed with ON and OFF
• Compact footprint
• MotorQuick® option (30A only)
• Increased depth accommodates up to 1½" size conduits
Unfused Disconnect Switches in Stainless Steel Enclosure
3 Pole 600V AC
Amp Description
Catalog Number
HBLDS3SS
Circuit-Lock disconnect switch.
Circuit-Lock disconnect switch with HBLAC1 auxiliary contact.
Circuit-Lock disconnect switch for use with variable frequency drives.
Circuit-Lock disconnect switch.
30
HBLDS3SSAC
HBLDS3SSVFD
HBLDS6SS
HBLDS3SS
HBLDS6SS
60
Circuit-Lock disconnect switch with HBLAC1 auxiliary contact.
Circuit-Lock disconnect switch.
HBLDS6SSAC
HBLDS10SS
HBLDS10SSAC
100
Circuit-Lock disconnect switch with HBLAC1 auxiliary contact.
MotorQuick® Unfused Disconnect Switches in Stainless Steel Enclosures
3 Pole 600V AC
Amp Description
Catalog Number
HBLDS3SS with one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3SS with 5 foot pre-wired LINKOSITY® female cable (load side).
HBLDS3SS with one pre-wired LINKOSITY® male receptacle (line side) and
one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3SSMQR
HBLDS3SSMQ5
HBLDS3SSMQR2
30
HBLDS3SSMQR
Accessories
Description
Catalog Number
HBLAC1
HBLAC1
HBLAC2
“Break After Main Break”, 1 set of n/o contacts, 1 set of n/c contacts.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
6
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
Hazardous Location Unfused Disconnect Switches,
Mechanical Interlocks and Plugs
Heavy Duty Industrial Environments
Hubbell’s hazardous location unfused disconnect and mechanical
interlock switches are ideal for applications with the presence of
flammable gases or vapors, or ignitable dusts and fibers. They
are also suitable for use in outdoor or indoor damp, wet and dirty
locations or in areas where frequent wash-downs, heavy rain or
water spray routinely occurs. Compact in size to reduce cost
over industry standard sizes, these switches are easy to position
on the wall or piece of equipment. The enclosures are made of
copper-free aluminum and have a polyester/epoxy finish to prevent
corrosion. The high visibility handles can be locked to meet OSHA
lockout/tagout regulations.
• Compact size provides application flexibility and cost savings
• Fewer cover bolts reduces installation and maintenance time
• Removable ductile mounting lugs adjust to irregular mounting surfaces
• UL 98 certified switch
Class I, Div. 1 & 2, Groups B,C,D
Class l, Zones 1 & 2, Groups llB+ H2, llA
Class II, Div. 1 & 2, Groups E,F,G
Class III
NEMA 3, 4, 4X, 7(B,C,D), 9(E,F,G)
Unfused Disconnect Switches
3 Pole 600V AC/230V DC
Amp
Description
Catalog Number
Disconnect switch.
HBLB7NFD13A
HBLB7NFD13AA
HBLB7NFD26A
HBLB7NFD26AA
HBLB7NFD21A
HBLB7NFD21AA
30
Disconnect switch with auxiliary contact.
Disconnect switch.
60
Disconnect switch with auxiliary contact.
Disconnect switch.
100
Disconnect switch with auxiliary contact.
HBLB7NFD13A
Hubbell hazardous location mechanical interlocks and plugs offer
superior safety. The plug and switch are interlocked so that the
switch cannot be turned “ON” without the plug fully inserted, and
the plug cannot be removed when the switch is in the “ON” position.
The switch features a copper-free aluminum construction with
epoxy finish and a chemical-resistant Valox® handle mechanism.
HBLB7NFD26A
• Plug and switch are interlocked for superior safety
• UL1686 C1 listed and fully interchangeable with other UL1686 C1 devices
• Compact size and footprint for easy placement
• NEMA 4X with receptacle lid turned shut or with plug locking ring tightened
Unfused Mechanical Interlocks and Plugs
Receptacle
Plug
Amp
Poles/Wires
Voltage AC
600V AC
600V AC
600V AC
600V AC
3 Pole, 2 Wire
4 Pole, 3 Wire
3 Pole, 2 Wire
4 Pole, 3 Wire
HBLVSQ3023
HBLVSQ3034
HBLVSQ6023
HBLVSQ6034
HBLVP3385
HBLVP3485
HBLVP6385
HBLVP6485
30
HBLVSQ3034
60
Note: HBLVSQ Series 30A models come standard with 1" drilled and tapped conduit openings top and bottom plus two 1" x ¾"
reducers and one ¾" close-up plug for maximum flexibility.
HBLVP3485
60A models come with one 1½" opening on top and bottom and one 1½" close-up plug.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
7
For complete listing of Hubbell Products see our full line catalog.
Circuit-Lock® Pin and Sleeve Mechanical Interlocks
67
20, 30, 60 and 100 Ampere – North American Ratings,
32 Ampere – International Rating
SUITABILITY
Hubbell Circuit-Lock® Pin and Sleeve Mechanical Interlocks are a
revolutionary design that incorporates a disconnect switch and pin
and sleeve receptacle in a compact non-metallic unit. These devices
offer maximum safety by preventing users from mating or breaking
a circuit under load—Hubbell’s interlock mechanism detects the
presence of a plug and prevents it from being removed when the
switch is in the "ON" position. It features a high visibility red handle
that can be locked to meet OSHA lockout/tagout regulations,
and the enclosure door can be locked to prevent unauthorized
access. The rugged, corrosion-resistant Type 4X Valox® enclosure
features adjustable mounting feet for flexible installation, while the
receptacle’s spring-loaded cover with gasket is dust tight and
provides a watertight seal when turned and locked.
• Mechanically interlocked to prevent mating and breaking under load
• Available in both IEC and UL1686-C1 Insulgrip® styles
• Fused disconnects accept Class "J" fuses
• Fully removable door for ease of wiring
• IEC reverse service units available for safely connecting generators
Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Amp Poles/Wires
Voltage AC
120/240V
3Ø 240V
Unfused
Reverse Service
Fused*
—
HBL420MI12W
HBL420MI9W
HBL420MI7W
HBL330MI4W
HBL330MI6W
HBL330MI7W
HBL430MI12W
HBL430MI9W
HBL430MI7W
HBL530MI9W
HBL530MI7W
HBL432MI3W
HBL360MI4W
HBL360MI6W
HBL360MI7W
HBL460MI12W
HBL460MI9W
HBL460MI7W
HBL560MI9W
HBL560MI7W
HBL3100MI6W
—
3 Pole,
20
—
—
4 Wire
3Ø 480V
—
—
120V
—
—
2 Pole,
3 Wire
240V
—
—
480V
—
—
120/240V
3Ø 240V
—
HBL430MIF12W
30
32
60
3 Pole,
4 Wire
HBL430MI9WR
HBL430MIF9W
HBL420MI7W
3Ø 480V
HBL430MI7WR
HBL430MIF7W
3ØY 120/208V
3ØY 277/480V
380V 50HZ-440V 60Hz
120V
—
—
—
—
—
—
—
4 Pole,
5 Wire
HBL530MIF7W
3 Pole, 4 Wire
—
—
—
—
2 Pole,
3 Wire
240V
480V
120/240V
3Ø 240V
HBL460MI12WR HBL460MIF12W
3 Pole,
4 Wire
HBL460MI9WR
HBL460MIF9W
HBL460MIF7W
HBL560MIF9W
—
3Ø 480V
HBL460MI7WR
3ØY 120/208V
3ØY 277/480V
240V
—
—
—
4 Pole,
5 Wire
HBL430MIF7W
2 Pole, 3 Wire
—
120/240V
3Ø 240V
HBL4100MI12W HBL4100MI12WR —
3 Pole,
4 Wire
100
HBL4100MI9W
HBL4100MI7W
HBL5100MI9W
HBL4100MI9WR
HBL4100MI7WR
—
—
—
—
3Ø 480V
4 Pole, 5 Wire
3ØY 120/208V
Insulgrip® Mechanical Interlocks - Style II
Amp Poles/Wires
Voltage
Unfused
Fused*
30
60
3 Pole, 4 Wire
3 Pole, 4 Wire
600V AC/250V DC
600V AC/250V DC
HBL430MIS2W
HBL460MIS2W
HBL430MIFS2W
HBL460MIFS2W
Note: 20A, 30A, 32A – 1 inch N.P.T. hub supplied; 60A, 100A – 1¼ inch hub supplied.
*Class “J” fuses not included.
HBL430MIS2W
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
8
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
Twist-Lock® Mechanical Interlock Switched Safety Enclres
Circuit-Lock® Unfused Safety Shroud® Twist-Lock®
IP66
SUITABILITY
Hubbell's Twist-Lock® Mechanical Interlock integrates an angled
watertight Hubbell Safety-Shroud® Twist-Lock® receptacle with a
linked disconnect switch that prevents making lazy connection or
breaking the circuit while under load. The switch cannot be turned
"ON" until the plug is properly inserted and locked, and the plug
cannot be removed until the switch is turned "OFF". The pre-molded
conduit entry hole is offset to prevent condensation from reaching
interior components, while speeding installation by making it easier
to pull conductors. Twist-Lock® Mechanical Interlocks offer superior
flexibility—they can be used in a horizontal or vertical position, and
the Type 4X corrosion-resistant enclosure allows for top, bottom or
back feed options.
• Mechanically interlocked to prevent mating and breaking under load
• Switched enclosures sold separately from receptacle for custom
electrical configurations
• Type 4X rated system with and without the plug inserted
• Horsepower rated switch
• Enclosure is designed for top, bottom or back feed options
Switched Safety Enclosures (Receptacles Sold Separately Listed Below)
Description
Ratings
Catalog Number
Mechanical Interlock accommodates Amperage and voltage ratings will be determined
20A or 30A Watertight Safety-Shroud® by the choice of the Watertight Safety-Shroud®
HBLMITL
Twist-Lock® receptacles.
Twist-Lock® selected. Supplied with ¾" N.P.T. Hub.
HBLMITL Accepts the Following Watertight Safety-Shroud® Twist-Lock® Receptacles:
NEMA Config.
Ref. Number
Max. HP
Rating*
Amp
Poles/Wires
Voltage AC
120
Receptacle
Mating Plug
L5-20
1
HBL2310SW
HBL2320SW
HBL2330SW
HBL2410SW
HBL2420SW
HBL2430SW
HBL2510SW
HBL2610SW
HBL2620SW
HBL2710SW
HBL2720SW
HBL2730SW
HBL2740SW
HBL2810SW
HBL2820SW
HBL2830SW
HBL2311SW
HBL2321SW
HBL2331SW
HBL2411SW
HBL2421SW
HBL2431SW
HBL2511SW
HBL2611SW
HBL2621SW
HBL2711SW
HBL2721SW
HBL2731SW
HBL2741SW
HBL2811SW
HBL2821SW
HBL2831SW
2 Pole,
3 Wire
208-240
277
L6-20
2.5
HBLMITL
L7-20
3
20
120/240
240 3Ø
480 3Ø
L14-20
L15-20
L16-20
L21-20
L5-30
2.5
3 Pole,
4 Wire
5 (3@208V)
10
3
4 Pole, 5 Wire 120/208 3ØY
HBL2320SW
120
1
2 Pole,
3 Wire
208-240
120/240
240 3Ø
480 3Ø
600 3Ø
120/208 3ØY
277/480
347/600
L6-30
3
L14-30
L15-30
L16-30
L17-30
L21-30
L22-30
L23-30
3
7.5
15
15
7.5
7.5
7.5
3 Pole,
4 Wire
HBL2321SW
30
4 Pole,
5 Wire
Note: *HP ratings for the final unit are determined by the HP rating of the switch, limited by the full load current capability of the
receptacle at 80% of rated current, number of phases and line voltage. HP ratings listed above are AC only.
Switched Safety Enclosures (Receptacles Sold Separately**)
Description
Ratings
Catalog Number
Switched Twist-Lock® enclosure
accommodates any NEMA 2 pole,
3 wire to 4 pole, 5 wire grounding
receptacle.
Amperage, voltage, and horsepower ratings
will be determined by the choice of the NEMA
20 or 30A Twist-Lock® receptacle selected.
SETL3
SETL3
Switched enclosure for use with
3 pole 4 wire 30A Hubbellock®
receptacle.
Amperage, voltage, and horsepower ratings
will be determined by the choice of the
4 wire Hubbellock®.
SEHBL3
SEHBL3
Note: **Please see the full line catalog for a complete selection of Twist-Lock and Hubbellock devices.
www.hubbell-wiring.com
9
For complete listing of Hubbell Products see our full line catalog.
600V AC Manual Motor Controllers/Disconnects
“Suitable as Motor Disconnects”
For use in nearly any industrial environment, Hubbell AC Manual Motor
Controllers/Disconnects can be easily integrated into equipment and
enclosures for either box or panel-mount installation. Rated “Suitable
as Motor Disconnect,” they feature a quick make and slow break
operation that ensures reliability and long life. Hubbell AC Manual
Motor Controllers/Disconnects have a 10,000 Amp high fault short
circuit withstand rating and a heat-resistant thermoset body that
provides resistant to arc tracking and superior dielectric strength.
The 30 Amp controller features a brass terminal screw clamping plate
for secure back or side wiring, and the 60 Amp version is available
with front or back wiring.
• All switches are “Suitable as a Motor Disconnect”
• Strong “ON/OFF” action with a quick make and
slow break operation
• Heat-resistant thermoset body provides superior
dielectric strength
30A, 40A and 50A
• Optional side guards available for close wall
applications and finger safe environments
60A and 85A
600V AC Manual Motor Controllers/Disconnects
HP Rating
120V AC 240V AC 480V AC 600V AC
Amp
30
Poles Toggle-type
Wire
1Ø
2
3Ø
5
3Ø
10
10
10
15
15
10
15
10
15
15
25
15
25
15
25
3Ø
15
15
15
20
20
15
20
15
25
20
30
20
30
20
40
Catalog Number
HBL7832D
HBL7832DS
HBL7832DX*
HBL7810D
HBL7810DS
HBL7842D
HBL7843D
HBL7852D
HBL7853D
HBL7862D
HBL7863D
HBL7862FWD
HBL7863FWD
HBL7882D
HBL7883D
HBLFG30
2
2
2
3
3
2
3
2
3
2
3
2
3
2
3
Standard
Short
Back/Side
Back/Side
Back/Side
Back/Side
Back/Side
Side
2
5
Standard
Standard
Short
2
5
3
7.5
7.5
5
3
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
2
HBL7810D
HBL7853D
40
50
Side
3
7.5
5
Side
2
Side
3
7.5
10
10
10
10
10
10
Back
—
—
—
—
—
—
Back
60
85
Front
Front
Back
HBL7863D
HBLFG30
Back
Optional Side Guard, for close wall applications and finger safe environments.
Note: *HBL7832DX is a 50 piece bulk pack of the HBL7832D.
10
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
NEMA Disconnect Switches
“Suitable as Motor Disconnects”
Circuit-Lock® NEMA 1 Enclosures with Switch
Ideal for use in industrial environments, i.e. conveyor systems, industrial fans, etc.
HP Rating
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
Amp
30
Poles Enclosure Material
Catalog Number
HBL1392D
HBL1389D
HBL1372D
HBL1379D
2
3
2
3
Thermoplastic/Steel
Thermoplastic/Steel
Aluminum
2
3
2
3
5
10
15
10
15
15
20
15
20
7.5
5
30
HBL1389D
HBL1379D
Aluminum
7.5
Circuit-Lock® NEMA 1 Enclosures without Switch
For use with 30A switches shown on page 10.
No. Equipment
Grounds
Description
Cover Material
Thermoplastic
Aluminum
Base Material
Steel
Catalog Number
HBL1390
For use with 30A switch.
For use with 30A switch.
1
2
Aluminum
HBL1370
HBL1390
HBL1370
Circuit-Lock® NEMA 3/3R Enclosures with Switch*
Ideal for use on outdoor equipment.
HP Rating
120V AC
1Ø
240V AC
3Ø
480V AC
600V AC
3Ø
Amp
30
Poles Enclosure Material
3Ø
10
15
10
15
Catalog Number
HBL13R22D
HBL13R23D
HBL13R12D†
HBL13R13D†
2
3
2
3
Thermoplastic
Thermoplastic
Aluminum
2
3
2
3
5
15
20
15
20
7.5
5
30
Aluminum
7.5
HBL13R22D
HBL13R12D
Note: *Drill weep-hole to alter from NEMA 3 to NEMA 3R.
†Equipped with HBLFG30 sidewall insulation barriers.
Circuit-Lock® NEMA 3R Enclosures with Switch
Ideal for use in outdoor environments.
HP Rating
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
Amp
30
Poles Enclosure Material
Catalog Number
HBL13R92D
HBL13R89D
HBL16R92D
HBL16R93D
2
3
2
3
Aluminum
Aluminum
Aluminum
Aluminum
2
3
5
10
15
15
25
15
20
20
30
7.5
10
10
—
—
60
Circuit-Lock® NEMA 3R Enclosures without Switch
For use with switches shown on page 10.
Description
Enclosure Material
Aluminum
Catalog Number
HBL13R90
HBL16R90
HBL13R89D
HBL16R93D
For use with 30A switch.
For use with 60A switch.
Aluminum
Circuit-Lock® NEMA 4X Enclosures with Rotary Handle
Ideal for use in environments where wash-down is necessary, i.e. food processing, laboratories, etc.
HP Rating
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
Amp
30
Poles Enclosure Material
Catalog Number
HBL13S33D
HBL13X33D
HBL16S63D
HBL16X63D
HBLFG30
2
3
3
3
Stainless Steel
Valox®
3
3
7.5
7.5
10
15
15
25
25
20
20
30
30
Stainless Steel
Valox®
—
—
60
10
HBL16S63D
HBL13X33D
Finger Guard option for 30A switch.
NO/NC auxiliary contact, 10A 120/250V AC for 30 and 60 Amp rotary switches.
HBLAUX
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
11
For complete listing of Hubbell Products see our full line catalog.
®
®
®
CIRCUIT-LOCK and MOTORQUICK
Wiring Device-s
Manual Motor Controllers and Disconnects
Quick Reference Guide
Circuit-Lock® Switched Enclosures
HP
Catalog Number
HBL1372D
HBL1379D
Amp Description
30 NEMA 1 Aluminum
30 NEMA 1 Aluminum
Phase Poles
120
2
3
2
3
2
3
2
3
2
3
—
—
1
1
1
1
1
240
5
7.5
5
7.5
5
7.5
5
480
10
15
10
15
10
15
10
15
10
15
15
25
15
15
15
15
10
50
50
50
50
15
15
25
25
15
30
600
15
20
15
20
15
20
15
20
15
20
20
30
15
15
15
15
10
50
50
50
50
20
20
30
30
20
40
1
3
1
3
1
3
1
3
1
3
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
3
2
3
2
3
2
3
2
3
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
HBL1392D
HBL1389D
HBL13R22D
HBL13R23D
HBL13R12D
HBL13R13D
HBL13R92D
HBL13R89D
HBL16R92D
HBL16R93D
HBLDS3*
HBLDS3AC*
HBLDS3NK
HBLDS3ACNK
HBLDS33ACNK
HBLDS6*
HBLDS6AC*
HBLDS10*
HBLDS10AC*
HBL13S33D
HBL13X33D
HBL16S63D
HBL16X63D
FDS30
30 NEMA 1 Non-Metallic
30 NEMA 1 Non-Metallic
30 NEMA 3/3R Non-Metallic
30 NEMA 3/3R Non-Metallic
30 NEMA 3R Die Cast Aluminum
30 NEMA 3R Die Cast Aluminum
30 NEMA 3R Aluminum
30 NEMA 3R Aluminum
60 NEMA 3R Aluminum
60 NEMA 3R Aluminum
30 TYPE 4X Non-Metallic
30 TYPE 4X Non-Metallic
30 TYPE 4X Non-Metallic
30 TYPE 4X Non-Metallic
30 TYPE 4X Non-Metallic
60 TYPE 4X Non-Metallic
60 TYPE 4X Non-Metallic
100 TYPE 4X Non-Metallic
100 TYPE 4X Non-Metallic
30 NEMA 4X Stainless Steel
30 NEMA 4X Non-Metallic
60 NEMA 4X Stainless Steel
60 NEMA 4X Non-Metallic
HBL1379D
HBL13R89D
7.5
5
7.5
10
10
7.5
7.5
7.5
7.5
5
30
30
30
30
7.5
7.5
10
10
7.5
15
HBLDS3
HBL16R93D
7.5
7.5
7.5
7.5
3
3
—
—
2
30 NEMA 4X Non-Metallic Fused Disconnect
60 NEMA 4X Non-Metallic Fused Disconnect
HBL13S33D
FDS30
FDS60
3
Note: *Stainless steel version carries the same HP rating.
MotorQuick® Disconnect Switches
HP
Catalog Number
HBL1389MQR
HBL1389MQ5
HBL1389MQR2
HBLDS3MQR
HBLDS3MQ5
HBLDS3MQR2
Amp Description
Phase Poles
120
3
3
3
1
240
7.5
7.5
7.5
7.5
7.5
7.5
480
15
15
15
15
15
15
600
20
20
20
15
15
15
30 NEMA 1 Non-Metallic
30 NEMA 1 Non-Metallic
30 NEMA 1 Non-Metallic
30 NEMA 4X Non-Metallic
30 NEMA 4X Non-Metallic
30 NEMA 4X Non-Metallic
3
3
3
3
3
3
3
3
3
3
3
3
1
1
HBLDS3MQR
HBLDS3MQ5
Circuit-Lock® Switches
HP
Catalog Number
HBL7832D
HBL7832DS
HBL7832DX
HBL7810D
HBL7810DS
HBL7842D
HBL7843D
HBL7852D
HBL7853D
HBL7862D
HBL7863D
HBL7862FWD
HBL7863FWD
HBL7882D
HBL7883D
Amp Description
30 Toggle Switch
Phase Poles
120
2
2
2
3
3
2
3
2
240
5
5
480
10
10
10
15
15
10
15
10
15
15
25
15
25
15
25
600
15
15
15
20
20
15
20
15
25
20
30
20
30
20
40
1
1
1
3
3
1
3
1
3
1
3
1
3
1
3
2
2
2
3
3
2
3
2
3
2
3
2
3
2
3
30 Short Toggle Switch
30 Toggle Switch, Bulk Pack
30 Toggle Switch
30 Short Toggle Switch
40 Toggle Switch
40 Toggle Switch
50 Toggle Switch
50 Toggle Switch
60 Toggle Switch
5
7.5
7.5
5
7.5
5
7.5
10
10
10
10
10
10
HBL7810D
HBL7853D
3
—
—
—
—
—
—
60 Toggle Switch
60 Toggle Switch – Front Wire
60 Toggle Switch – Front Wire
85 Toggle Switch
HBL7843D
HBL7863D
85 Toggle Switch
®
www.hubbell-wiring.com
Wiring Device-Kellems
Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 • Phone (800) 288-6000 • FAX (800) 255-1031
Printed in U.S.A. Specifications subject to change without notice. ® Registered trademarks of Hubbell Incorporated.
WLBSB001 11/12
相关型号:
©2020 ICPDF网 联系我们和版权申明