HD6433257 [ETC]
USB Adapter for E6000/E8000 Emulator HS6000EIU01H Description Notes User＇s Manual/Emulator ; USB适配器E6000 / E8000仿真器HS6000EIU01H说明Notes用户手册/仿真器\n
| 型号： | HD6433257 |
| 厂家： | 
ETC |
| 描述： | USB Adapter for E6000/E8000 Emulator HS6000EIU01H Description Notes User＇s Manual/Emulator
|
| 文件： | 总24页 (文件大小：191K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
To all our customers
Regarding the change of names mentioned in the document, such as Hitachi
Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand
names are mentioned in the document, these names have in fact all been changed to Renesas
Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and
corporate statement, no changes whatsoever have been made to the contents of the document, and
these changes do not constitute any alteration to the contents of the document itself.
Renesas Technology Home Page: http://www.renesas.com
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
Cautions
Keep safety first in your circuit designs!
1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but
there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire
or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i)
placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or
mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation
product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any
other rights, belonging to Renesas Technology Corporation or a third party.
2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in
these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents
information on products at the time of publication of these materials, and are subject to change by Renesas Technology
Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact
Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these
inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by various means, including the
Renesas Technology Corporation Semiconductor home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of
the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other
loss resulting from the information contained herein.
5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used
under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an
authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for
any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea
repeater use.
6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these
materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license
from the Japanese government and cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein.
USB Adapter for E6000/E8000
Emulator
HS6000EIU01H
Description Notes
ADE-702-325
Rev. 1.0
07/08/02
Hitachi, Ltd.
HS6000EIU01HE
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s
patent, copyright, trademark, or other intellectual property rights for information contained in
this document. Hitachi bears no responsibility for problems that may arise with third party’s
rights, including intellectual property rights, in connection with use of the information
contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you
have received the latest product standards or specifications before final design, purchase or
use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability.
However, contact Hitachi’s sales office before using the product in an application that
demands especially high quality and reliability or where its failure or malfunction may directly
threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear
power, combustion control, transportation, traffic, safety equipment or medical equipment for
life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi
particularly for maximum rating, operating supply voltage range, heat radiation characteristics,
installation conditions and other characteristics. Hitachi bears no responsibility for failure or
damage when used beyond the guaranteed ranges. Even within the guaranteed ranges,
consider normally foreseeable failure rates or failure modes in semiconductor devices and
employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi
product does not cause bodily injury, fire or other consequential damage due to operation of
the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document
without written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi
semiconductor products.
IMPORTANT INFORMATION
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
Emulator Product:
Throughout this document, the term "emulator product" shall be defined as the following
products produced only by Hitachi, Ltd. excluding all subsidiary products.
•
•
•
•
•
E6000 series emulator station or E8000 series emulator station
USB adapter
User system interface cables
SIMM memory module
Optional boards
The user system or a host computer is not included in this definition.
Purpose of the USB Adapter:
When Hitachi Debugging Interface (hereinafter referred to as HDI), a software debugging tool
that runs on Windows , is used, when USB-connecting the USB adapter, this USB adapter is used
for USB-connecting an E6000 series emulator or an E8000 series emulator to an host computer,
and supports software and hardware development. This USB adapter must only be used for the
above purpose.
Improvement Policy:
Hitachi, Ltd. (including its subsidiaries, hereinafter collectively referred to as Hitachi) pursues
a policy of continuing improvement in design, functions, performance, and safety of the emulator
product. Hitachi reserves the right to change, wholly or partially, the specifications, design, user's
manual, and other documentation at any time without notice.
Target User of the Emulator Product:
This emulator product should only be used by those who have carefully read and thoroughly
understood the information and restrictions contained in the user's manual. Do not attempt to use
the emulator product until you fully understand its mechanism.
It is highly recommended that first-time users be instructed by users that are well versed in the
operation of the emulator product.
i
LIMITED WARRANTY
Hitachi warrants its emulator products to be manufactured in
accordance with published specifications and free from defects in
material and/or workmanship. Hitachi, at its option, will repair or
replace any emulator products returned intact to the factory,
transportation charges prepaid, which Hitachi, upon inspection,
determine to be defective in material and/or workmanship. The
foregoing shall constitute the sole remedy for any breach of Hitachi's
warranty. See the Hitachi warranty booklet for details on the warranty
period. This warranty extends only to you, the original Purchaser. It is
not transferable to anyone who subsequently purchases the emulator
product from you. Hitachi is not liable for any claim made by a third
party or made by you for a third party.
DISCLAIMER
HITACHI MAKES NO WARRANTIES, EITHER EXPRESS OR
IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED
HEREIN, INCLUDING WITHOUT LIMITATION THEREOF,
WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR
AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT
SHALL HITACHI BE LIABLE FOR ANY DIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE
EMULATOR PRODUCT, THE USE OF ANY EMULATOR
PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS
EXPRESSLY STATED OTHERWISE IN THIS WARRANTY, THIS
EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU MUST
ASSUME ALL RISK FOR THE USE AND RESULTS OBTAINED
FROM THE EMULATOR PRODUCT.
ii
State Law:
Some states do not allow the exclusion or limitation of implied warranties or liability for
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which may vary from
state to state.
The Warranty is Void in the Following Cases:
Hitachi shall have no liability or legal responsibility for any problems caused by misuse, abuse,
misapplication, neglect, improper handling, installation, repair or modifications of the emulator
product without Hitachi's prior written consent or any problems caused by the user system.
All Rights Reserved:
This user's manual and emulator product are copyrighted and all rights are reserved by Hitachi.
No part of this user's manual, all or part, may be reproduced or duplicated in any form, in hard-
copy or machine-readable form, by any means available without Hitachi's prior written consent.
Other Important Things to Keep in Mind:
1. Circuitry and other examples described herein are meant merely to indicate the characteristics
and performance of Hitachi's semiconductor products. Hitachi assumes no responsibility for
any intellectual property claims or other problems that may result from applications based on
the examples described herein.
2. No license is granted by implication or otherwise under any patents or other rights of any third
party or Hitachi.
Figures:
Some figures in this user's manual may show items different from your actual system.
Limited Anticipation of Danger:
Hitachi cannot anticipate every possible circumstance that might involve a potential hazard.
The warnings in this user's manual and on the emulator product are therefore not all inclusive.
Therefore, you must use the emulator product safely at your own risk.
iii
SAFETY PAGE
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
DEFINITION OF SIGNAL WORDS
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION
CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result
in property damage.
NOTE emphasizes essential information.
iv
WARNING
Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the user
system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Do not repair or remodel the emulator product by
yourself for electric shock prevention and quality
assurance.
2. Always switch OFF the E6000 and E8000 emulator and
user system before connecting or disconnecting any
CABLES or PARTS.
3. Supply power according to the power specifications and
do not apply an incorrect power voltage. Use only the
provided power cable.
v
Preface
The USB adapter for the E6000 / E8000 emulators is described in this description notes. Read
this notes and the User's manuals for the E6000 and E8000 emulators.
This USB adapter provides USB connection of the E6000/E8000 emulator to an host computer via
the USB interface, enabling program debugging through an HDI.
Notes: 1. Microsoft and Windows are registered trademarks of Microsoft Corporation in the
United States and/or in other countries.
Microsoft Windows 98 Second Edition operating system is referred to as Windows
98SE in this description notes.
Microsoft Windows Millennium Edition operating system is referred to as
Windows Me in this description notes.
Microsoft Windows 2000 operating system is referred to as Windows 2000 in this
description notes.
2. IBM PC is a registered trademark of International Business Machines Corporation.
3. The TCP/IP communication functions of this product include the AVE-TCP of
ACCESS CO., LTD. AVE-TCP is a trademark of ACCESS CO.,LTD.
4. Displays in this notes are examples at using the Windows 2000.
5. Pentium is a registered trademark of Intel.
vi
Contents
Section 1 Overview.............................................................................................1
1.1 System Configuration .......................................................................................................1
1.2 Operating Environments ...................................................................................................2
1.3 Environmental Conditions ................................................................................................3
Section 2 Components.........................................................................................4
2.1 USB Adapter.....................................................................................................................5
Section 3 Preparation Before Use .......................................................................6
3.1 Connecting USB Cable to USB Adapter...........................................................................6
3.2 Connecting USB Adapter to E6000 Emulator ..................................................................7
3.3 Connecting USB Adapter to E8000 Emulator ..................................................................8
Section 4 Setting up the USB Adapter................................................................10
4.1 Procedures.........................................................................................................................10
4.2 Selecting the USB Driver..................................................................................................11
Section 5 Troubleshooting ..................................................................................12
Section 6 External Dimensions of the USB Adapter ..........................................13
vii
Section 1 Overview
This section describes the system configuration at USB connection and the USB adapter.
1.1
System Configuration
Figure 1 shows the system configuration when connecting the E6000 emulator and the USB
adapter. The E8000 emulator can be connected in the same way. Refer to figure 5 when
connecting the E8000 emulator and the USB adapter.
The host computer containing Windows and the USB adapter are connected via the USB cable.
The USB adapter and the E6000/E8000 emulator are connected through the PC interface cable.
Host computer (Windows®)
AC
USB cable
AC power-supply adapter
HS6000EIU01H
PC interface cable
E6000 emulator
USB adapter
Figure 1 System Configuration of E6000 Emulator Connection
1
1.2
Operating Environments
Table 1 Operating Environments
Item
Description
Host computer
Built-in Pentium® or higher-performance CPU (500 MHz or higher
recommended); IBM PC or compatible machine with the USB interface.
USB interface
Basic software
Complied with USB Specification Rev. 1.1
Windows® 98SE, Windows® Me, or Windows® 2000
Minimum memory
capacity
32 Mbytes or more (double of the load module size recommended)
Hard-disk capacity
Installation disk capacity: 10 Mbytes or more. (Prepare an area at
least double the memory capacity (four-times or more recommended)
as the swap area.)
Pointing device such as
mouse
Connectable to the host computer; compatible with Windows® 98SE,
Windows® Me, and Windows® 2000.
CD-ROM drive
Required to install the HDI for the emulator or refer to the emulator
user’s manual.
2
1.3
Environmental Conditions
CAUTION
Observe the conditions listed in table 2 when using the USB adapter.
Failure to do so will damage the USB adapter, the emulator product,
and the user system.
Table 2 Environmental Conditions
No.
Item
Specification
1
Temperature Operating: +10 C to +35 C
°
°
Storage: -10 C to +50 C
°
°
2
3
Humidity
Vibration
Operating: 35% RH to 80% RH, no condensation
Storage: 35% RH to 80% RH, no condensation
Operating: 2.45m/S2 max.
Storage: 4.9m/S2 max.
Transportation: 14.7m/S2 max.
4
5
DC power-
supply
Voltage: DC 5 V
Current: 250 mA
Ambient
gases
There must be no corrosive gasses present.
3
Section 2 Components
Table 3 lists the components of the USB adapter.
Table 3 Components
Item
Product Name
Configuration
Quantity
Remarks
Hardware
USB adapter
1
Number of printed
circuit boards mounted:
1
PC interface cable
USB cable
1
Cable length: 1.5 m
With a ferrite core (for
EMI* disturbance)
1
1
Cable length: 2 m
Documen- Description Notes
HS6000EIU01HE
tation
on Using USB
Adapter for
E6000/E8000
Emulator
(HS6000EIU01H)
(This manual)
Note: EMI is an abbreviation of electrical magnetic interference.
4
2.1
USB Adapter
Figure 2 shows each part of the USB adapter.
1
HS6000EIU01H
2
ACT
HITACHI
+
4
+
3
Figure 2 USB Adapter
Numbers in figure 2 indicate the following:
(1) Product name: Product name (HS6000EIU01H) of the USB adapter.
(2) USB port: Connects the USB cable.
(3) LED displaying the communication state: This LED is lit if a communication error occurs.
(4) PC interface cable connector: Connects the emulator.
5
Section 3 Preparation Before Use
Connecting USB Cable to USB Adapter
WARNING
3.1
Always switch OFF the emulator product and user
system before connecting or disconnecting the USB
adapter.
Failure to do so will result in a FIRE HAZARD and will
damage the user system, USB adapter, and emulator
product or will result in PERSONAL INJURY.
Use the AC power-supply adapter provided in the
package.
(1) Connect the USB cable to the connector marked ‘
’ as shown in figure 3.
USB
HS6000EIU01H
P C I / F
HITACHI
ACT
+
+
Figure 3 Connecting USB Cable to USB Adapter
6
3.2
Connecting USB Adapter to E6000 Emulator
WARNING
Always switch OFF the emulator product and user
system before connecting or disconnecting the USB
adapter.
Failure to do so will result in a FIRE HAZARD and will
damage the user system, USB adapter, and emulator
product or will result in PERSONAL INJURY.
To use the E6000 emulator, connect the USB adapter to the E6000 emulator station via the
supplied PC interface cable, as shown in figure 4. Connect the PC interface cable connector with a
ferrite core to the E6000 emulator.
Rear panel of E6000 emulator station
USB adapter
POWER DC IN
PC IF
O
I
Connector with
EML lable
PC
EML
Ferrite core
PC interface cable
Figure 4 Connecting USB adapter to E6000 Emulator
7
3.3
Connecting USB Adapter to E8000 Emulator
WARNING
Always switch OFF the emulator product and user
system before connecting or disconnecting the USB
adapter.
Failure to do so will result in a FIRE HAZARD and will
damage the user system, USB adapter, and emulator
product or will result in PERSONAL INJURY.
To use the E8000 emulator, connect the USB adapter to the E8000 emulator station via the
supplied PC interface cable, as shown in figure 5. Connect the PC interface cable connector with a
ferrite core to the E8000 emulator.
8
Rear panel of E8000 emulator station
Connector with
EML label
USB adapter
Ferrite core
PC interface cable
Figure 5 Connecting USB Adapter to E8000 Emulator
9
Section 4 Setting up the USB Adapter
4.1
Procedures
Figure 6 shows the setup procedures of the USB adapter.
(1) Select the USB driver at HDI installation (refer to section 4.2,
Selecting the USB Driver).
(2) Connect the device according to figures 1 and 2.
(3) Power-on the emulator.
Figure 6 Setup Procedures
10
4.2
Selecting the USB Driver
During HDI installation, select 'USB Driver' in the [Select Components] dialog box.
Figure 7 [Select Components] Dialog Box
Notes: 1. Figure 7 is a dialog box for installing the E6000 HDI.
2. If ‘USB Driver’ is not displayed as a component, operating environments in table 1
will not be satisfied. Check the operating system in use.
11
Section 5 Troubleshooting
The problems that may occur when using the USB adapter and the measures to be taken are as
follows.
1. The HDI will not start.
•
If the emulator is not powered-on, an error message will be displayed when the HDI is
started. Check that the USB adapter and emulator are correctly connected and the emulator
is powered-on.
2. The HDI stops operating.
•
•
Check that the USB adapter and emulator are correctly connected.
Check if another HDI tries to communicate with the USB adapter. Multiple HDIs cannot
use one USB adapter at the same time.
3. The LED is lit for displaying the communication state.
•
The USB adapter has an LED for displaying the communication state as shown in figure 8.
This LED will be lit if an error occurs in the USB interface communication.
If this LED is lit after above items 1 and 2 have been checked and have no problems, turn
the emulator and the user system off, remove the USB cable from the USB adapter, and
connect them again.
If the problem is not solved even if those measures have been taken, there will be a failure in the
USB adapter. In such a case, contact Hitachi’s sales agency.
HS6000EIU01H
ACT
HITACHI
+
+
Figure 8 LED for Displaying the Communication State
12
Section 6 External Dimensions of the USB Adapter
94.0
22.0
0.5
HS6000EIU01H
HITACHI
ACT
Unit: mm
Tolerance: 1.0mm
13
相关型号：
©2020 ICPDF网 联系我们和版权申明