HD6475398 [ETC]
Description Notes on Using LAN Adapter for E6000/E8000 Emulator (HS6000ELN01H) User＇s Manual/Emulator ; 对使用LAN适配器E6000 / E8000仿真器（ HS6000ELN01H ）用户手册/仿真器的注意事项说明
| 型号： | HD6475398 |
| 厂家： | 
ETC |
| 描述： | Description Notes on Using LAN Adapter for E6000/E8000 Emulator (HS6000ELN01H) User＇s Manual/Emulator
|
| 文件： | 总27页 (文件大小：218K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
To all our customers
Regarding the change of names mentioned in the document, such as Hitachi
Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand
names are mentioned in the document, these names have in fact all been changed to Renesas
Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and
corporate statement, no changes whatsoever have been made to the contents of the document, and
these changes do not constitute any alteration to the contents of the document itself.
Renesas Technology Home Page: http://www.renesas.com
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
Cautions
Keep safety first in your circuit designs!
1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but
there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire
or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i)
placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or
mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation
product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any
other rights, belonging to Renesas Technology Corporation or a third party.
2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in
these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents
information on products at the time of publication of these materials, and are subject to change by Renesas Technology
Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact
Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these
inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by various means, including the
Renesas Technology Corporation Semiconductor home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of
the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other
loss resulting from the information contained herein.
5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used
under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an
authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for
any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea
repeater use.
6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these
materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license
from the Japanese government and cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein.
Description Notes on Using LAN Adapter
for E6000/E8000 Emulator
(HS6000ELN01H)
ADE-702-326
Rev. 1.0
07/08/02
Hitachi, Ltd.
HS6000ELN01HE(B)
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s
patent, copyright, trademark, or other intellectual property rights for information contained in
this document. Hitachi bears no responsibility for problems that may arise with third party’s
rights, including intellectual property rights, in connection with use of the information
contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you
have received the latest product standards or specifications before final design, purchase or
use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability.
However, contact Hitachi’s sales office before using the product in an application that
demands especially high quality and reliability or where its failure or malfunction may directly
threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear
power, combustion control, transportation, traffic, safety equipment or medical equipment for
life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi
particularly for maximum rating, operating supply voltage range, heat radiation characteristics,
installation conditions and other characteristics. Hitachi bears no responsibility for failure or
damage when used beyond the guaranteed ranges. Even within the guaranteed ranges,
consider normally foreseeable failure rates or failure modes in semiconductor devices and
employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi
product does not cause bodily injury, fire or other consequential damage due to operation of
the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document
without written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi
semiconductor products.
IMPORTANT INFORMATION
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
Emulator Product:
Throughout this document, the term "emulator product" shall be defined as the following products
produced only by Hitachi, Ltd. excluding all subsidiary products.
•
•
•
•
•
E6000 series emulator station or E8000 series emulator station
LAN adapter
User system interface cables
SIMM memory module
Optional boards
The user system or a host computer is not included in this definition.
Purpose of the LAN Adapter:
When Hitachi Debugging Interface (hereinafter referred to as HDI), a software debugging tool that
runs on Windows , is used, when LAN-connecting the LAN adapter this LAN adapter is used for LAN-
connecting an E6000 series emulator or an E8000 series emulator to an host computer, and supports
software and hardware development. This LAN adapter must only be used for the above purpose.
Improvement Policy:
Hitachi, Ltd. (including its subsidiaries, hereinafter collectively referred to as Hitachi) pursues a policy
of continuing improvement in design, functions, performance, and safety of the emulator product. Hitachi
reserves the right to change, wholly or partially, the specifications, design, user's manual, and other
documentation at any time without notice.
Target User of the Emulator Product:
This emulator product should only be used by those who have carefully read and thoroughly
understood the information and restrictions contained in the user's manual. Do not attempt to use the
emulator product until you fully understand its mechanism.
It is highly recommended that first-time users be instructed by users that are well versed in the
operation of the emulator product.
i
LIMITED WARRANTY
Hitachi warrants its emulator products to be manufactured in
accordance with published specifications and free from defects in
material and/or workmanship. Hitachi, at its option, will repair or replace
any emulator products returned intact to the factory, transportation
charges prepaid, which Hitachi, upon inspection, determine to be
defective in material and/or workmanship. The foregoing shall constitute
the sole remedy for any breach of Hitachi's warranty. See the Hitachi
warranty booklet for details on the warranty period. This warranty
extends only to you, the original Purchaser. It is not transferable to
anyone who subsequently purchases the emulator product from you.
Hitachi is not liable for any claim made by a third party or made by you
for a third party.
DISCLAIMER
HITACHI MAKES NO WARRANTIES, EITHER EXPRESS OR
IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED
HEREIN, INCLUDING WITHOUT LIMITATION THEREOF,
WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR
AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT
SHALL HITACHI BE LIABLE FOR ANY DIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE
EMULATOR PRODUCT, THE USE OF ANY EMULATOR
PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS
EXPRESSLY STATED OTHERWISE IN THIS WARRANTY, THIS
EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU MUST
ASSUME ALL RISK FOR THE USE AND RESULTS OBTAINED
FROM THE EMULATOR PRODUCT.
ii
State Law:
Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives
you specific legal rights, and you may have other rights which may vary from state to state.
The Warranty is Void in the Following Cases:
Hitachi shall have no liability or legal responsibility for any problems caused by misuse, abuse,
misapplication, neglect, improper handling, installation, repair or modifications of the emulator product
without Hitachi's prior written consent or any problems caused by the user system.
All Rights Reserved:
This user's manual and emulator product are copyrighted and all rights are reserved by Hitachi. No
part of this user's manual, all or part, may be reproduced or duplicated in any form, in hard-copy or
machine-readable form, by any means available without Hitachi's prior written consent.
Other Important Things to Keep in Mind:
1. Circuitry and other examples described herein are meant merely to indicate the characteristics and
performance of Hitachi's semiconductor products. Hitachi assumes no responsibility for any
intellectual property claims or other problems that may result from applications based on the examples
described herein.
2. No license is granted by implication or otherwise under any patents or other rights of any third party
or Hitachi.
Figures:
Some figures in this user's manual may show items different from your actual system.
Limited Anticipation of Danger:
Hitachi cannot anticipate every possible circumstance that might involve a potential hazard. The
warnings in this user's manual and on the emulator product are therefore not all inclusive. Therefore, you
must use the emulator product safely at your own risk.
iii
SAFETY PAGE
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
DEFINITION OF SIGNAL WORDS
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION
CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result
in property damage.
NOTE emphasizes essential information.
iv
WARNING
Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the user
system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Do not repair or remodel the emulator product by
yourself for electric shock prevention and quality
assurance.
2. Always switch OFF the E6000 and E8000 emulator and user
system before connecting or disconnecting any CABLES or
PARTS.
3. Supply power according to the power specifications and
do not apply an incorrect power voltage. Use only the
provided power cable.
v
Preface
The LAN adapter for the E6000 / E8000 emulators is described in this description notes. Read this notes
and the User's manuals for the E6000 and E8000 emulators.
This LAN adapter provides LAN connection of the E6000/E8000 emulator to an host computer, enabling
program debugging through an HDI.
Notes: 1. Microsoft , Windows , and Windows NT are registered trademarks of Microsoft
Corporation in the United States and/or in other countries. Microsoft Windows 95
operating system is referred to as Windows 95, Microsoft Windows 98 operating system is
referred to as Windows 98, and Microsoft Windows NT operating system is referred to as
Windows NT in this description notes.
2. IBM PC is a registered trademark of International Business Machines Corporation.
3. The TCP/IP communication functions of this product include the AVE-TCP of ACCESS
CO., LTD. AVE-TCP is a trademark of ACCESS CO.,LTD.
4. Displays in this notes are examples at using the Windows 98.
5. Pentium is a registered trademark of Intel.
vi
Contents
Section 1 Overview ............................................................................................1
1.1 System Configuration .......................................................................................................1
1.2 Operating Environments ...................................................................................................2
Section 2 Components .......................................................................................3
2.1 LAN Adapter ....................................................................................................................4
Section 3 Preparation Before Use.....................................................................6
3.1 Power Supply....................................................................................................................6
3.1.1 AC Adapter..........................................................................................................6
3.1.2 Polarity.................................................................................................................6
3.2 Connecting LAN Cable to LAN Adapter..........................................................................7
3.3 Connecting LAN Adapter to E6000 Emulator..................................................................8
3.4 Connecting LAN Adapter to E8000 Emulator..................................................................9
Section 4 Setting up the LAN Adapter ............................................................11
4.1 Procedures.........................................................................................................................11
4.2 Selecting the LAN Driver .................................................................................................12
4.3 Setting the IP Address of the LAN Adapter......................................................................12
Section 5 Troubleshooting.................................................................................14
Section 6 Environmental Conditions ...............................................................15
Section 7 External Dimensions of the LAN Adapter......................................16
vii
Section 1 Overview
This section describes the system configuration at LAN connection and the LAN adapter.
1.1
System Configuration
Figure 1 shows the system configuration when connecting the E6000 emulator and the LAN adapter. The
E8000 emulator can be connected in the same way. Refer to figure 7 when connecting the E8000
emulator and the LAN adapter.
The host computer containing Windows and the LAN adapter are connected via the LAN interface
(10BASE-T or 100BASE-TX).
The LAN adapter and the E6000/E8000 emulator are connected through the PC interface cable.
Host computer (Windows®)
LAN
AC
AC power-supply adapter
C A H I H I T
E 6 0 0 0
HS6000ELN01H
PC interface cable
E6000 emulator
AC
LAN adapter
AC power-supply adapter
Figure 1 System Configuration of E6000 Emulator Connection
1
1.2
Operating Environments
Table 1 Operating Environments
Item
Description
Host computer
Built-in Pentium or higher-performance CPU (166 MHz or higher
recommended)
OS
Windows 95, Windows 98, or Windows NT 4.0
(Not operated in Windows 3.1)
Minimum memory capacity
Hard-disk capacity
32 Mbytes (double of the load-module file size recommended)
Installation disk capacity: 10 Mbytes or more
At initiation: At least double the memory capacity (four-times or more
recommended)
Floppy disk drive
Display
3.5 inches (2 HD) for installation
Resolution: 640 x 480 or more (800 x 600 or more recommended)
10 BASE-T/100 BASE-TX based on IEEE 802.3
LAN type
Protocol
TCP/IP (when using the LAN adapter configuration (setting the IP),
UDP)
Others
Mouse (or a pointing device such as a mouse)
2
Section 2 Components
Table 2 lists the components of the LAN adapter.
Table 2
Components
Item
Product Name
Configuration
Quantity
Remarks
Hardware
LAN adapter
1
Number of printed
circuit boards mounted:
1
PC interface cable
1
Cable length: 1.5 m
With a ferrite core (for
EMI* disturbance)
AC power-supply
adapter
1
1
1
Cable length: 1.8 m
Cable length: 2.5 m
HS6000ELN01HE(A)
AC power-supply
cable
Documen- Description Notes
tation
on Using LAN
Adapter for
E6000/E8000
Emulator
(HS6000ELN01H)
(This manual)
Note: EMI is an abbreviation of electrical magnetic interference.
3
2.1
LAN Adapter
Figure 2 shows each part of the LAN adapter.
1
HITACHI
HS6000ELN01H
DC IN
LAN
POWER
6
+
+
3
2
4
5
Figure 2 LAN Adapter
Numbers in figure 2 indicate the following:
(1) Product name: Product name (HS6000ELN01H) of the LAN adapter.
(2) 100BASE-TX/10BASE-T port: Connects the LAN cable.
(3) LED displaying the communication state: Table 3 shows the LED names, contents, and states at
power-on.
Table 3 LED Names, Contents, and States at Power-on
LED Name
LED Contents
Speed
During 100BASE-TX mode communication: Lit
During 10BASE-T mode communication: Unlit
Col
Tx
During collision detection in half-duplex mode (with Monostable function): Lit
During data transmission (with Monostable function): Lit
During data receiving (with Monostable function): Lit
Rx
Link
Full
During normal linking (communication with the connected hub enabled): Lit
During full-duplex mode communication: Lit
Note: The LAN adapter only lights "Speed" if the LAN cable is not connected at power-on.
(4) Power switch: Power switch for the LAN adapter (Pressing the O–side powers-on the adapter.
Pressing the I-side powers-off the adapter.).
(5) Power input connector: Inputs the external AC power supply by using the power adapter of the LAN
adapter.
(6) PC interface cable connector: Connects the emulator.
4
Figure 3 shows the label on the back of the LAN adapter. The MAC address of the LAN adapter is
printed on the back label.
MODEL HS6000ELN01H
MAC ADDRESS
SERIAL No. WS0007 C
+
-
DS 5V
2. OA
MADE IN JAPAN
00-00-E1-0C-5B-06
Figure 3 LAN Adapter Label
5
Section 3 Preparation Before Use
3.1
Power Supply
3.1.1
AC Adapter
The AC adapter supplied with the E6000 emulator must be used at all times.
3.1.2 Polarity
Figure 4 shows the polarity of the power-supply plug.
Figure 4 Polarity of Power Supply Plug
6
3.2
Connecting LAN Cable to LAN Adapter
WARNING
Always switch OFF the emulator product and user system
before connecting or disconnecting the LAN adapter.
Failure to do so will result in a FIRE HAZARD and will
damage the user system, LAN adapter, and emulator
product or will result in PERSONAL INJURY.
Use the AC power-supply adapter provided in the package.
(1) Connect the LAN cable to the LAN socket as shown in figure 5.
(2) Connect the AC power-supply adapter to the DCIN socket.
HITACHI
HS6000ELN01H
HUB
DC IN
LAN
POWER
+
+
AC power-supply adapter
Figure 5 Connecting LAN Cable to LAN Adapter
7
3.3
Connecting LAN Adapter to E6000 Emulator
WARNING
Always switch OFF the emulator product and user system
before connecting or disconnecting the LAN adapter.
Failure to do so will result in a FIRE HAZARD and will
damage the user system, LAN adapter, and emulator
product or will result in PERSONAL INJURY.
To use the E6000 emulator, connect the LAN adapter to the E6000 emulator station via the supplied PC
interface cable, as shown in figure 6. Connect the PC interface cable connector with a ferrite core to the
E6000 emulator.
LAN adapter
Rear panel of E6000 emulator station
POWER DC IN
PC IF
O
I
Connector with
EML label
PC
EML
Ferrite core
PC interface cable
Figure 6 Connecting LAN adapter to E6000 Emulator
8
3.4
Connecting LAN Adapter to E8000 Emulator
WARNING
Always switch OFF the emulator product and user system
before connecting or disconnecting the LAN adapter.
Failure to do so will result in a FIRE HAZARD and will
damage the user system, LAN adapter, and emulator
product or will result in PERSONAL INJURY.
NOTE: When connecting the E8000 emulator to the host computer using a LAN adapter, select host
computerinterface (S7: ON, S8: ON) for the console setting. For details, refer to 3.3 System
Connection in the E8000 emulator user's manual.
To use the E8000 emulator, connect the LAN adapter to the E8000 emulator station via the supplied PC
interface cable, as shown in figure 7. Connect the PC interface cable connector with a ferrite core to the
E8000 emulator.
9
Rear panael of E8000 emulator station
CONT
CONT
LAN
DCONT
DCONT
TRC
TRC
POWER
Connector with
EML label
LAN Adapter
250V 3A
EML
Ferrite core
AC INPUT
PC
AC100-120V/
AC200-240V
2A 50/60Hz
TRACE
PC interface cable
Figure 7 Connecting LAN Adapter to E8000 Emulator
10
Section 4 Setting up the LAN Adapter
4.1
Procedures
Figure 8 shows the setup procedures of the LAN adapter.
Since the IP address and the subnet mask are not set in the LAN adapter, set them to the LAN adapter
before using.
(1) Select the LAN driver at HDI installation (refer to section 4.2,
Selecting the LAN Driver).
(2) Check that the IP address is set to the host computer.
(3) Connect the device according to figures 1 and 2.
(4) Power-on the LAN adapter and the emulator.
(5) Set the IP address of the LAN adapter (the IP address must
be set from within the same network). Refer to section 4.3,
Setting the IP Address of the LAN Adapter.
(6) Power off the LAN adapter and then power on again.
Figure 8 Setup Procedures
11
4.2
Selecting the LAN Driver
During HDI installation, select 'LAN' in the [Select Driver Type] dialog box.
Figure 9 [Select Driver Type] Dialog Box
4.3
Setting the IP Address of the LAN Adapter
To set the IP address to the LAN adapter, the LAN adapter configuration (LAC) in the HDI is needed.
1. Initiating the LAN adapter configuration
Select 'LAN adapter configuration' from the installed HDI program menu.
Figure 10 HDI Program Menu
12
2. After initiating 'LAN adapter configuration', the following dialog box is displayed.
Figure 11 [LAN adapter configuration] Dialog Box
3. The IP address for the LAN adapter can be set and the setting information can be defined from the
PC used in setting up, by selecting 'Setting and registering of the IP address'.
4. The LAN adapter to be connected can be selected from the LAN adapter information in the
configuration database defined in the PC by selecting 'Selecting the LAN adapter to be connected'.
5. The IP address set for the LAN adapter, subnet mask, and the default gateway can be checked by
selecting 'Checking the IP address of the LAN adapter'. On-line help can be displayed by clicking
the Help button in any LAN adapter configuration dialog box. Refer to the on-line help for
assistance with usage or troubleshooting.
NOTE: To set the IP address of the LAN adapter, connect the host computer and LAN adapter to the
same network. After the IP address is set in the LAN adapter, be sure to power-off the adapter,
and on again before continuing to use it.
13
Section 5 Troubleshooting
The problems that may occur when using the LAN adapter and the measures to be taken are as follows.
1. When the LAN adapter configuration is used, the IP address cannot be set in the
LAN adapter or the IP address that has been set cannot be checked
•
Check that the LAN adapter and the host computer using the adapter configuration are connected
to the same network.
•
Check that the LAN adapter is powered on.
2. The HDI will not start.
•
•
•
If the LAN adapter and the emulator are not both powered-on, a time out error will occur after one
minute.
Check that the IP address, subnet mask, and default gateway in the LAN adapter are correctly set.
Refer to on-line help for the LAN adapter configuration for details on the adapter settings.
After setting the IP address in the LAN adapter, power off the adapter and power it on again.
3. The HDI stops operating.
•
•
Check that the LAN adapter and emulator are correctly connected.
Check that the LAN adapter and emulator are powered on.
The LAN adapter has diagnostic LEDs' as shown in figure 12.
If these problems are not resolved by taking the specified corrective action, contact the Hitachi sales
agency. Be prepared to advise the agency of the status of these LEDs.
H S 0 0 E L N 0 1 H
LED
1
2
3
4
LED
1
2
3
4
Figure 12 Diagnostic LED
14
Section 6 Environmental Conditions
CAUTION
Observe the conditions listed in table 4 when using the LAN adapter.
Failure to do so will damage the LAN adapter, the emulator product, and
the user system.
Table 4 Environmental Conditions
No.
Item
Specification
1
Temperature Operating: +10°C to +35°C
Storage: -10°C to +50°C
2
3
Humidity
Operating: 35% RH to 80% RH, no condensation
Storage: 35% RH to 80% RH, no condensation
Vibration
Operating: 2.45m/S2 max.
Storage: 4.9m/S2 max.
Transportation: 14.7m/S2 max.
4
5
AC power-
supply
Voltage: AC 100-240 V
Current: 61-70 VA
Frequency: 50/60 Hz
Ambient
gases
There must be no corrosive gasses present.
15
Section 7 External Dimensions of the LAN Adapter
126.1
27.5
0.5
HS6000ELN01H HITACHI
DC IN
+
POWER
–
LAN
Unit: mm
Tolerance: ±1.0mm
16
相关型号：
HD6477021TEI
RISC Microcontroller, 32-Bit, EPROM, SH7000 CPU, 16.6MHz, CMOS, PQFP100, PLASTIC, TQFP-100
HITACHI
HD6477021VTE
RISC Microcontroller, 32-Bit, EPROM, SH7000 CPU, 12.5MHz, CMOS, PQFP100, PLASTIC, TQFP-100
HITACHI
©2020 ICPDF网 联系我们和版权申明