HE2B-M222 [ETC]
Multi-contact 3-position enabling switches Ideal for installing in large teach pendants;型号: | HE2B-M222 |
厂家: | ETC |
描述: | Multi-contact 3-position enabling switches Ideal for installing in large teach pendants |
文件: | 总3页 (文件大小:181K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HE2B Enabling Switch
Multi-contact 3-position enabling switches Ideal for installing in large teach pendants
• Ergonomically-designed OFF-ON-OFF operation.
• Easy recognition of position 1 to 2 transition is made possible by a snap
action switch.
• Sufficient difference in operating force is provided for shifting from posi-
tion 2 to 3.
• Low pressure is required to maintain position 2, allowing for longtime
operation.
• Reliable operation is assured even when the edge of the operator button
is pressed.
• The switch does not turn ON while being released from position 3 (OFF)
to position 1 (OFF) (IEC60204-1, 9.2.5.8).
• Some teach pendants are equipped with two 3-position enabling
switches, and when one switch is pressed to position 3 (OFF), the other
switch must not enable machine operation even when pressed to posi-
tion 2. Enabling of machine operation must resume after both switches
are released. For this purpose, also available are 3-position enabling
switches with monitoring switches for button returned to position 1 and
button pressed to position 3 (monitor switches have direct opening
action mechanism).
• Two contacts are provided in a 3-position enabling switch so that even if
one contact fails due to welding or short-circuit, the other contact can
disable machine operation.
Direct Opening
Action
• The waterproof rubber boot provides IP65 protection.
Types
Contact Configuration
Package
Quantity
Type
Type No.
Ordering Type No.
Button Return
Monitor Switch
Button Depress
Monitor Switch
3-position Switch
HE2B-M200
HE2B-M200PN10
HE2B-M211
HE2B-M211PN10
HE2B-M222
HE2B-M222PN10
HE2B-M200P∗
HE2B-M200P∗PN10
HE2B-M211P∗
HE2B-M211P∗PN10
HE2B-M222P∗
HE2B-M222P∗PN10
HE2B-M200PN1
HE2B-M200PN1PN10
HE2B-M211PN1
HE2B-M211PN1PN10
HE2B-M222PN1
HE2B-M222PN1PN10
1
10
1
10
1
10
1
10
1
10
1
10
1
10
1
10
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
HE2B-M200
Without Rubber Boot
2
2
2
2
2
2
2
2
HE2B-M211
HE2B-M222
HE2B-M200P∗
HE2B-M211P∗
HE2B-M222P∗
HE2B-M200PN1
HE2B-M211PN1
HE2B-M222PN1
Rubber Boot Material:
Silicon Rubber
Color:
Y: yellow
B: black
With
Rubber Boot
Rubber Boot Material:
NBR/PVC Polyblend
Color: gray
10
Note: Specify rubber boot color code in place of ∗ in the Type No.
•
Type No. Development
HE2B - M 2 0 0 P ∗
• 3-position Switch
2: 2 contacts
• Button Return Monitor Switch
0: No switch
1: 1 contact
2: 2 contacts
• Button Depress Monitor Switch
0: No switch
1: 1 contact
2: 2 contacts
• Rubber Boot Material, Color
Blank: No rubber boot
Y:
B:
Silicon rubber, yellow
Silicon rubber, black
N1: NBR/PVC polyblend, gray
• Rubber Boot
Blank: No rubber boot
P:
With rubber boot
Ratings
•
Contact Ratings
Rated Insulation Voltage (Ui)
Rated Thermal Current (Ith)
Rated Voltage (Ue)
250V
3A
125V
30V
250V
Resistive Load (AC-12)
Inductive Load (AC-15)
Resistive Load (DC-12)
Inductive Load (DC-13)
Resistive Load (AC-12)
Inductive Load (AC-15)
Resistive Load (DC-12)
Inductive Load (DC-13)
—
—
1A
0.7A
—
—
2A
1A
1A
0.7A
0.2A
0.1A
2A
1A
0.4A
0.5A
0.5A
—
—
1A
0.5A
0.2A
0.1A
AC
DC
AC
DC
3-position Switch
Rated Current (Ie)
Button Return Monitor Switch
Button Depress Monitor Switch
0.22A
2 contacts
0 to 2 contacts
0 to 2 contacts
3-position Switch
Button Return Monitor Switch
Button Depress Monitor Switch
Contact Configuration
• Minimum applicable load (reference value): 3V AC/DC, 5 mA
8
HE2B Enabling Switch
Specifications
Applicable Standards
IEC 60947-5-1, EN60947-5-1 (DEMKO approval), UL508 (UL recognized)
CSA C22.2, No. 14 (c-UL recognized), JIS C8201-5-1
ISO 12100 / EN 292, IEC 60204-1 / EN 60204-1
Applicable Standards for Use
Operating Temperature
ISO11161 / prEN 11161, ISO10218 / EN 775, ANSI / RIA R15.06, ANSI B11.19
–25 to +60°C (no freezing) (without rubber boot, with silicon rubber boot)
–10 to +60°C (no freezing) (with NBR/PVC polyblend rubber boot)
Relative Humidity
45 to 85% RH (no condensation)
–40 to +80°C (no freezing)
Storage Temperature
2 (inside panel, terminal side)
3 (outside panel, operator side)
Pollution Degree
Contact Resistance
Insulation Resistance
50 mΩ maximum (initial value)
Between live and dead metal parts: 100 MΩ minimum (500V DC megger)
Between terminals of different poles: 100 MΩ minimum (500V DC megger)
Impulse Withstand Voltage
Operating Frequency
2.5 kV
1,200 operations per hour
Position 1 → 2 → 1:
1,000,000 operations minimum
Mechanical Durability
Electrical Durability
Shock Resistance
Position 1 → 2 → 3 → 1: 100,000 operations minimum
100,000 operations minimum
Operating extremes: 150 m/s2
Damage limits:
1,000 m/s2
Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Vibration Resistance
Damage limits:
16.7 Hz, amplitude 1.5 mm
Terminal Style
Solder terminal
Applicable Wire
1 cable, 0.5 mm2 maximum
310 to 350 °C, 3 seconds maximum
20N minimum
Solder Terminal Heat Resistance
Terminal Tensile Strength
Mounting Screw Recommended Tightening Torque 0.5 to 0.8 N·m
IP40 (without rubber boot)
IP65 (with rubber boot)
Degree of Protection
Conditional Short-circuit Current
Direct Opening Force
50A (250V) (Use 250V/10A fast acting type fuse for short-circuit protection.)
60N minimum (button return monitor and button depress monitor switches)
500N minimum (when pressing the entire button surface)
Operator Strength
26g (without rubber boot)
30g (with rubber boot)
Weight (approx.)
Operation Characteristics
Position 1
Approx. 30N
Position 2
Position 3
Operating Force (reference value)
(without rubber boot, when pressing
the center of the operator)
Approx. 4N
0.3
0.3
0.5
0.5
0.5
0.3
Travel (mm) 0
2.4
3.0
3.6
4.2
6.0
1.4
When pressing the operator
Between NO1 - C1
Between NO2 - C2
Between 11 - 12
Between 21 - 22
Between 31 - 32
Between 41 - 42
: ON (closed)
: OFF (open)
When releasing the operator
Between NO1 - C1
Between NO2 - C2
Between 11 - 12
Between 21 - 22
Between 31 - 32
Between 41 - 42
Notes:
• When a rubber boot is used, the operating force depends on the operating temperature.
• The operating force to shift the switch from position 2 to position 3 can be changed. For details, contact IDEC.
9
AS-Interface Components
HE2B Enabling Switch
Terminal Arrangement (Bottom View)
IDEC Logo Side
IDEC Logo Side
HE2B-M222
IDEC Logo Side
HE2B-M211
HE2B-M200
• 3-position switch (note):
2 contacts, terminal nos. between NO1 – C1, NO2 – C2
• Button return monitor switch: 0 to 2 contacts, terminal nos. between 11 – 12, 21 – 22
• Button depress monitor switch: 0 to 2 contacts, terminal nos. between 31 – 32, 41 – 42
Note: Use NO and C terminals for OFF → ON → OFF 3-position switch (NC terminal is not used).
Dimensions
• Without Rubber Boot
• With Rubber Boot
M3 nut hole
90
68
87
78
66.5
69
69
• M3 nuts are supplied with the HE2B enabling switch.
Mounting Hole Layout
0.2
70
0.2
78
• Mounting screw: Two M3 screws
• Length of mounting screw: The thickness of mounting panel + 4 to 5 mm
Mounting Screws
All dimensions in mm.
10
相关型号:
HE2B-M222P
Multi-contact 3-position enabling switches Ideal for installing in large teach pendants
ETC
HE2B-M222PN1
Multi-contact 3-position enabling switches Ideal for installing in large teach pendants
ETC
HE2C108M25.4045HC
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 160V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
SAMWHA
HE2C108M25045HA
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 160V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount, RADIAL LEADED
SAMWHA
HE2C337M25.4025HC
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 160V, 20% +Tol, 20% -Tol, 330uF, Through Hole Mount
SAMWHA
HE2D128M40040HC
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 1200uF, Through Hole Mount
SAMWHA
HE2D277M25.4025HA
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 270uF, Through Hole Mount
SAMWHA
HE2D277M25.4025HC
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 270uF, Through Hole Mount
SAMWHA
HE2D687M25.4045HA
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 680uF, Through Hole Mount
SAMWHA
HE2D687M25.4045HC
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 680uF, Through Hole Mount
SAMWHA
©2020 ICPDF网 联系我们和版权申明