HK-A2919 [ETC]
CRYSTAL CLOCK OSCILLATORS; 晶体时钟振荡器型号: | HK-A2919 |
厂家: | ETC |
描述: | CRYSTAL CLOCK OSCILLATORS |
文件: | 总2页 (文件大小:365K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet 0012G
CRYSTAL CLOCK OSCILLATORS
Rev. C
Differential Positive ECL (DPECL)
SK-2910 Series
Description
The SK-2910 Series of quartz crystal oscillators provide DPECL Fast Edge compatible signals. This device
is to operate using positive voltage and uses multiple ground pins for improved signal integrity. This device
is intended to operate on positive voltage for PECL applications.
Features
• Wide frequency range–122.0MHz to 300.0MHz
• User specified tolerance available
• Case at electrical ground
• Low Jitter
• Overtone technology
• High Q Crystal actively tuned oscillator circuit
• Will withstand vapor phase temperatures of 253°C • Power supply decoupling internal
for 4 minutes maximum
• All metal, resistance weld, hermetically sealed
package
• Dual ground plane for added stability
• No internal PLL avoids cascading PLL problems
• High frequencies due to proprietary design
• High shock resistance, to 1500g
Electrical Connection
Pin
Connection
1
2
6
7
8
9
VCC
VEE Case
VEE Case
Output
/Output
VEE Case
13 VEE Case
14 Enable/Disable
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com www.nelfc.com
Data Sheet 0012G
CRYSTAL CLOCK OSCILLATORS
Rev. C
SK-2910 Series Continued
Differential Positive ECL (DPECL)
Operating Conditions and Output Characteristics
Electrical Characteristics
Parameter
Symbol
-----
Conditions
-----
Min
Typical
Max
Frequency
122.0MHz
45/55%
-----
-----
300.0MHz
55/45%
VCC-1.60V
VCC-0.74V
600 psec
5 psec
Duty Cycle
-----
@ 50% points
-----
Logic 0 (2)
VOL
VCC-1.95V
VCC-1.02V
-----
Logic 1(2)
VOH
-----
-----
Rise & Fall Time
Jitter, RMS(3)
Enable Voltage(4)
Disable Voltage
Frequency Stability (1)
tr,tf 20-80%VO with 50 ohm load to VCC-2V -----
350 psec
-----
-----
----
-----
-----
with VEE=0V
0V
-----
1.0V
-----
dF/F
with VEE=0V
3.0V
-100ppm
-----
VCC
Overall conditions including:
voltage, calibration, temp.,
10 yr aging, shock, vibration
-----
+100ppm
General Characteristics
Parameter
Symbol
Conditions
Min
Typical
5.0V
Max
Supply Voltage
Supply Current
VCC
ICC
-----
4.75V
0.0 mA
5.25V
120 mA
50 ohm termination
To 2.00V below VCC
-----
Output current
IO
Low level Output Current 0.0 mA
-----
-----
-----
±50.0 mA
70°C
Operating temperature
Storage temperature
TA
TS
------
-----
0°C
-55°C
125°C
Input: Logic High (ECL) - Disables
VEE or Open - Enables
Lead temperature
Load
TL
Soldering, 10 sec.
-----
-----
300°C
10 ms
50 Ohm to VCC-2V or Thevenin Equivalent, Bias Required
Start-up time
tS
-----
-----
2 ms
Environmental and Mechanical Characteristics
Mechanical Shock
Thermal Shock
Vibration
Per MIL-STD-202, Method 213, Condition E
Per MIL-STD-833, Method 1011, Condition A
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
300°C for 10 seconds
Soldering Condition
Hermetic Seal
Leak rate less than 1 x 10 -8 atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) VOL, VOH, referenced to ground
3) Jitter performance is frequency dependent. Please contact factory for full characterization.
4) Open to Enable pin also enables to output.
Creating a Part Number
SK - A291X - FREQ
Package Code
Tolerance/Performance
0 ±100ppm 0-70°C
1 ±50ppm 0-70°C
HK Leaded 8 pin (14pin)
SK 8 pin (14 pin) SMD Gull
Wing
7 ±25ppm 0-70°C
Input Voltage
9 Customer Specific
A ±20ppm 0-70°C
Code Specification
A
3.3V
5V
B ±50ppm -40 to +85°C
C ±100ppm -40 to +85°C
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com www.nelfc.com
相关型号:
©2020 ICPDF网 联系我们和版权申明