IE-703217-G1-EM1 [ETC]
IE-703217-G1-EM1 User's Manual | User's Manual[09/2003] ; IE- 703217 -G1 -EM1用户手册|用户手册[ 09/2003 ]\n型号: | IE-703217-G1-EM1 |
厂家: | ETC |
描述: | IE-703217-G1-EM1 User's Manual | User's Manual[09/2003]
|
文件: | 总52页 (文件大小:670K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
User’s Manual
IE-703217-G1-EM1
Emulation Board
Target Devices
V850ES/KF1TM
V850ES/KG1TM
V850ES/KJ1TM
Document No. U16594EJ1V0UM00 (1st edition)
Date Published September 2003 N CP(K)
2003
Printed in Japan
[MEMO]
User’s Manual U16594EJ1V0UM
2
V850ES/KF1, V850ES/KG1, and V850ES/KJ1 are trademarks of NEC Electronics Corporation.
Windows is either a trademark or a registered trademark of Microsoft Corporation in the United States and/or
other countries.
PC/AT is a trademark of International Business Machines Corporation.
•
The information in this document is current as of February, 2003. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
User’s Manual U16594EJ1V0UM
3
Regional Information
Some information contained in this document may vary from country to country. Before using any NEC
Electronics product in your application, pIease contact the NEC Electronics office in your country to
obtain a list of authorized representatives and distributors. They will verify:
•
•
•
•
•
Device availability
Ordering information
Product release schedule
Availability of related technical literature
Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
•
Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary
from country to country.
[GLOBAL SUPPORT]
http://www.necel.com/en/support/support.html
NEC Electronics Hong Kong Ltd.
Hong Kong
Tel: 2886-9318
NEC Electronics America, Inc. (U.S.)
Santa Clara, California
Tel: 408-588-6000
NEC Electronics (Europe) GmbH
Duesseldorf, Germany
Tel: 0211-65 03 01
800-366-9782
NEC Electronics Hong Kong Ltd.
Seoul Branch
• Sucursal en España
Madrid, Spain
Tel: 091-504 27 87
Seoul, Korea
Tel: 02-558-3737
• Succursale Française
Vélizy-Villacoublay, France
Tel: 01-30-67 58 00
NEC Electronics Shanghai, Ltd.
Shanghai, P.R. China
Tel: 021-6841-1138
• Filiale Italiana
Milano, Italy
Tel: 02-66 75 41
NEC Electronics Taiwan Ltd.
Taipei, Taiwan
Tel: 02-2719-2377
• Branch The Netherlands
Eindhoven, TheNetherlands
Tel: 040-2445845
NEC Electronics Singapore Pte. Ltd.
Novena Square, Singapore
Tel: 6253-8311
• Tyskland Filial
Taeby, Sweden
Tel: 08-63 80 820
• United Kingdom Branch
Milton Keynes, UK
Tel: 01908-691-133
J03.4
User’s Manual U16594EJ1V0UM
4
INTRODUCTION
Target Readers
Purpose
This manual is intended for users who design and develop application systems
using the V850ES/KF1, V850ES/KG1, and V850ES/KJ1 microcontrollers.
The purpose of this manual is to describe the basic specifications of the IE-
703217-G1-EM1 and its proper operation.
Organization
This manual is broadly divided into the following parts.
• Outline
• Setup procedure
• Cautions
• Part names and functions
• Switch settings
• Restrictions
How to Read This Manual It is assumed that the reader of this manual has general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers. Use the IE-703217-G1-EM1
connected to the in-circuit emulator (IE-V850ES-G1). This manual describes the basic
setup procedures and switch settings of the IE-703217-G1-EM1 and IE-V850ES-G1.
For the part names, functions, and configuration parts of the IE-V850ES-G1, refer to
the IE-V850ES-G1 User’s Manual (U16313E) provided separately.
To learn about the basic specifications and operation
→Read this manual in the order listed in CONTENTS.
To learn software settings such as the operation methods, command functions, etc., of
the IE-V850ES-G1 or IE-703217-G1-EM1
→Read the user’s manual of the debugger (sold separately) that is used.
Conventions
Note:
Footnote for item marked with Note in the text
Caution:
Remark:
Information requiring particular attention
Supplementary information
…
Numeral representation: Binary
×××× or ××××B
...
Decimal ××××
...
Hexadecimal ××××H
Prefix representing a power of 2 (address space, memory capacity):
K (kilo): 210 = 1024
M (mega): 220 = 10242
Terminology
The meanings of terms used in this manual are listed below.
Target device
Target system
This is the device to be emulated.
The system (user-built system) to be debugged. This includes the target program and hardware
configured by the user.
Emulation CPU
The CPU that executes the program created by the user in the emulator.
User’s Manual U16594EJ1V0UM
5
Related Documents
When using this manual, refer to the following manuals.
The related documents (user’s manuals) indicated in this publication may include
preliminary versions. However, preliminary versions are not marked as such.
Documents Related to Development Tools (User’s Manuals)
Document Name
Document Number
U16313E
IE-V850ES-G1 (In-Circuit Emulator for V850ES)
IE-703217-G1-EM1 (In-Circuit Emulator Emulation Board for V850ES/KF1, V850ES/KG1,
V850ES/KJ1)
This manual
V850ES/KF1, V850ES/KG1, V850ES/KJ1 Hardware
U15862E
U16053E
U16054E
U16055E
U16042E
U16217E
U16218E
U14873E
CA850 Ver.2.50 C Compiler Package
Operation
C Language
PM Plus
Assembly Language
Operation WindowsTM based
Operation Windows based
ID850 Ver.2.50 Integrated Debugger
SM850 Ver.2.50 System Simulator
SM850 Ver.2.00 or Later System Simulator
External Part User Open
Interface Specifications
RX850 Ver.3.13 or Later (Real-Time OS)
Basics
U13430E
U13410E
U13431E
U13773E
U13774E
U13772E
U13737E
U13916E
U14410E
U15260E
Installation
Technical
Basics
RX850 Pro Ver.3.13 (Real-Time OS)
Installation
Technical
RD850 Ver.3.01 Task Debugger
RD850 Pro Ver.3.01 Task Debugger
AZ850 Ver.3.10 System Performance Analyzer
PG-FP4 Flash Memory Programmer
Caution The related documents listed above are subject to change without notice.
Be sure to use the latest version of each document when designing.
User’s Manual U16594EJ1V0UM
6
CONTENTS
CHAPTER 1 OUTLINE ........................................................................................................................10
1.1 Product Configuration...........................................................................................................11
1.2 Features ..................................................................................................................................12
1.3 Function Specifications (When Connected to IE-V850ES-G1) ..........................................13
1.4 System Configuration............................................................................................................14
1.5 Contents in Carton.................................................................................................................15
CHAPTER 2 PART NAMES AND FUNCTIONS..................................................................................16
2.1 Part Names and Functions of IE-703217-G1-EM1...............................................................16
2.2 LEDs Controlled by IE-703217-G1-EM1................................................................................18
CHAPTER 3 SWITCH SETTINGS.......................................................................................................19
3.1 Clock Settings ........................................................................................................................19
3.2 Pull-Up Resistor Settings......................................................................................................20
3.3 Power-ON Threshold Voltage Settings................................................................................21
3.4 Regulator Output Stabilization Capacitance Setting Jumpers..........................................22
CHAPTER 4 SETUP PROCEDURE ....................................................................................................23
4.1 Removing Probe and Replacing Clock Module ..................................................................23
4.2 Removing Emulation Board..................................................................................................25
4.3 Probe Cable Connection .......................................................................................................28
CHAPTER 5 CAUTIONS .....................................................................................................................29
CHAPTER 6 RESTRICTIONS .............................................................................................................30
APPENDIX A TARGET INTERFACE CHARACTERISTICS...............................................................31
APPENDIX B EXTERNAL VIEWS.......................................................................................................44
User’s Manual U16594EJ1V0UM
7
LIST OF FIGURES
Figure No.
Title
Page
1-1
1-2
System Configuration ........................................................................................................................................14
Contents in Carton.............................................................................................................................................15
2-1
2-2
Part Names of IE-703217-G1-EM1....................................................................................................................16
LEDs Controlled by IE-703217-G1-EM1............................................................................................................18
3-1
3-2
JP4 Settings at Shipment ..................................................................................................................................21
Changing Power-ON Threshold Voltage............................................................................................................21
4-1
4-2
4-3
4-4
4-5
4-6
Opening/Closing Cover Step 1 (Removing Front Cover 1)................................................................................23
Opening/Closing Cover Step 1 (After Removing Front Cover 1) .......................................................................24
Opening/Closing Cover Step 2 (Loosening Screws) .........................................................................................25
Opening/Closing Cover Step 2 (Lifting Front Cover 2) ......................................................................................26
Opening/Closing Cover Step 2 (After Lifting Front Cover 2)..............................................................................27
Probe Cable Attachment Position......................................................................................................................28
A-1
A-2
A-3
A-4
A-5
A-6
A-7
A-8
A-9
Equivalent Circuit A ...........................................................................................................................................31
Equivalent Circuit B ...........................................................................................................................................31
Equivalent Circuit C ...........................................................................................................................................31
Equivalent Circuit D ...........................................................................................................................................32
Equivalent Circuit E ...........................................................................................................................................32
Equivalent Circuit F............................................................................................................................................32
Equivalent Circuit G...........................................................................................................................................33
Equivalent Circuit H ...........................................................................................................................................33
Equivalent Circuit I.............................................................................................................................................34
A-10 Equivalent Circuit J............................................................................................................................................34
User’s Manual U16594EJ1V0UM
8
LIST OF TABLES
Figure No.
Title
Page
3-1
3-2
3-3
Main Clock Settings...........................................................................................................................................19
Pull-Up Resistor Settings...................................................................................................................................20
Regulator Output Stabilization Capacitance Settings........................................................................................22
A-1
A-2
A-3
Pin Correspondence List (V850ES/KJ1 Pin Names).........................................................................................35
Pin Correspondence List (V850ES/KG1 Pin Names)........................................................................................39
Pin Correspondence List (V850ES/KF1 Pin Names).........................................................................................42
User’s Manual U16594EJ1V0UM
9
CHAPTER 1 OUTLINE
The IE-703217-G1-EM1 is an emulation board for the IE-V850ES-G1 in-circuit emulator.
Connected to the IE-V850ES-G1, the IE-703217-G1-EM1 can be used for efficient hardware and software
debugging during system development using the V850ES/KF1, V850ES/KG1, and V850ES/KJ1.
This manual describes the basic setup procedure and the switch settings of the IE-V850ES-G1 when connected to
the IE-703217-G1-EM1. For the part names and functions of the IE-V850ES-G1, refer to the separate IE-V850ES-G1
User’s Manual (U16313E).
10
User’s Manual U16594EJ1V0UM
CHAPTER 1 OUTLINE
1.1 Product Configuration
Separately-sold products
In-circuit emulator (IE-V850ES-G1)
The IE-V850ES-G1 can be used as an in-circuit emulator for
the V850ES/KF1, V850ES/KG1, and V850ES/KJ1 by installing
the IE-703217-G1-EM1 board.
Emulation board
(IE-703217-G1-EM1)
Separately-sold products
Sockets
Package conversion sockets made by NEC Electronics
EV-703210GC
EV-703210GK
EV-703214GC
EV-703217GJ
EV-703210GC: For V850ES/KF1 (GC package)
EV-703210GK: For V850ES/KF1 (GK package)
EV-703214GC: For V850ES/KG1
EV-703217GJ: For V850ES/KJ1
PC interface board
This is a board for connecting the IE-V850ES-G1 to a PC.
More than one such board can be installed using the PC s
expansion slots.
IE-70000-PCI-IF(-A): For PCI bus
IE-70000-CD-IF-A: For PCMCIA socket
,
IE-70000-PCI-IF(-A)
IE-70000-CD-IF-A
11
User’s Manual U16594EJ1V0UM
CHAPTER 1 OUTLINE
1.2 Features
• Maximum operating frequency: 20 MHz (2.7 V to 5.5 V)
• The following pins can be masked.
NMI, WAIT, RESET, HLDRQ
• The external dimensions of the IE-703217-G1-EM1 are listed below
Item
Value
External dimensions
Height
Width
Depth
35 mm
205 mm
140 mm
12
User’s Manual U16594EJ1V0UM
CHAPTER 1 OUTLINE
1.3 Function Specifications (When Connected to IE-V850ES-G1)
Item
Specification
Emulation memory capacity
Internal ROM
1 MB
For user memory
Internal ROM
4 MB
Execution/pass detection coverage memory capacity
256 KB
1 MB
External memory
External memory
Internal ROM
Memory access detection coverage memory capacity
1 MB
Branch destination entry count calculation coverage
memory capacity
256 KB
1 MB
External memory
Trace memory capacity
Time measurement function
External logic probe
168 bits × 32 K frames
Internal timers × 3
8-bit external trace possible
Trace/break event setting possible
Event break
Break function
Step execution break
Forced break
Fail-safe break
• Illegal access to peripheral I/O
• Access to guard area
• Write to ROM area
Caution Some functions may not be supported depending on the debugger that is used.
13
User’s Manual U16594EJ1V0UM
CHAPTER 1 OUTLINE
1.4 System Configuration
The system configuration when using the IE-703217-G1-EM1 connected to the IE-V850ES-G1, which itself is
connected to a PC (PC-9800 series or PC/ATTM compatible) is shown below.
Figure 1-1. System Configuration
<10>
<7>
Target connector connection example
(enlarged view)
<6>
<1>
<8>
Target
system
<9>
<2>
<8>
<4>
<3>
Target system
<9>
Remarks <1>: PC (PC-9800 series or PC/AT compatible)
<2>: Debugger (sold separately), device file (obtained separately)Note 1
<3>: PC interface board (IE-70000-PCI-IF(-A), IE-70000-CD-IF-A: Sold separately)
<4>: PC interface cable (supplied with IE-V850ES-G1)
<5>: IE-V850ES-G1 (sold separately)
<6>: In-circuit emulator emulation board (this product)
<7>: Probe cableNote 2 (supplied with this product)
<8>: Conversion adapterNote 2
<9>: Target connectorNote 2
<10>: Power-supply cable (3 types) (supplied with IE-V850ES-G1)
Notes 1. The device file can be downloaded from the NEC Electronics website. (URL: http://www.necel.com/micro)
2. For the probe cable, conversion adapter, and target connector, refer to the user's manual of the emulation
board.
14
User’s Manual U16594EJ1V0UM
CHAPTER 1 OUTLINE
1.5 Contents in Carton
The IE-703217-G1-EM1 package contains the IE-703217-G1-EM1 emulation board, a guarantee card, a packing
list, this manual, and an accessory bag. Check whether the accessory bag contains the items listed below. If you find
any missing or damaged items, contact an NEC Electronics sales representative or distributor.
Figure 1-2. Contents in Carton
<1> IE-703217-G1-EM1
<4> Packing list
<3> Guarantee card
<2> Accessory bag
<1> IE-703217-G1-EM1
× 1
<2> Accessory bag
<3> Guarantee card
× 1
×
1
<4> Packing list
× 1
Check whether the accessory bag contains the following items in addition to this manual and the packing list (× 1).
(a) 8-pin header (for resonator replacement):
× 1
(b) 4-pin header (for reference voltage replacement): × 1
(c) Socket (for REGC capacitor replacement):
(d) Screws/washers:
× 1
6 sets (6 screws + 6 washers)
15
User’s Manual U16594EJ1V0UM
CHAPTER 2 PART NAMES AND FUNCTIONS
This chapter describes the part names and functions of the IE-703217-G1-EM1.
For the part names and functions of the IE-V850ES-G1, refer to the IE-V850ES-G1 User’s Manual (U16313E).
2.1 Part Names and Functions of IE-703217-G1-EM1
Figure 2-1. Part Names of IE-703217-G1-EM1
Regulator output stabilization capacitance setting jumper
JP7
Regulator output stabilization capacitance socket
JP8
JP7JP8
3 2
SW1
8
Power-ON threshold voltage setting socket
JP4
Pull-up resistance setting switch
SW1
4
JP4
1
1
1
1
Main clock oscillator socket
X1
X1
1
Subclock resonator socket
OSC2
1
7
8
OSC2
OSC1
Main clock resonator socket
OSC1
1
1
CN7
CN6
CN5
50
50
50
1
1
Emulation probe cable connection connectors
CN5,CN6,CN7
GXP-AXK/KEL
IE-703217-G1-EM1
16
User’s Manual U16594EJ1V0UM
CHAPTER 2 PART NAMES AND FUNCTIONS
(1) Emulation probe cable connection connectors (CN5, CN6, CN7)
Connect the supplied probe cable.
(2) Main clock resonator socket (OSC1)
This socket is used to connect the main clock resonator. (For details, refer to 3.1 Clock Settings.)
(3) Subclock resonator socket (OSC2)
This socket is used to connect the subclock resonator. (For details, refer to 3.1 Clock Settings.)
(4) Main clock oscillator socket (X1)
This socket is used to connect the main clock oscillator. (For details, refer to 3.1 Clock Settings.)
(5) Pull-up resistance setting switch (SW1)
This switch is used to set emulation of the pull-up resistance, which is a mask option of the V850ES/KF1,
V850ES/KG1, and V850ES/KJ1. (For details, refer to 3.2 Pull-Up Resistor Settings.)
(6) Power-ON threshold voltage setting socket (JP4)
This socket is used to set the threshold voltage for judging whether the target system is connected. (For
details, refer to 3.3 Power-ON Threshold Voltage Settings.)
(7) Regulator output stabilization capacitance socket (JP8)
This socket is used to stabilize the output when using the regulator of the V850ES/KF1, V850ES/KG1, or
V850ES/KJ1. (For details, refer to 3.4 Regulator Output Stabilization Capacitance Setting Jumpers.)
(8) Regulator output stabilization capacitance setting jumper (JP7)
This jumper is used to set whether to use the regulator of the V850ES/KF1, V850ES/KG1, or V850ES/KJ1.
(For details, refer to 3.4 Regulator Output Stabilization Capacitance Setting Jumpers.)
17
User’s Manual U16594EJ1V0UM
CHAPTER 2 PART NAMES AND FUNCTIONS
2.2 LEDs Controlled by IE-703217-G1-EM1
Some of the LEDs mounted in the IE-V850ES-G1 are controlled by the IE-703217-G1-EM1.
For the LEDs that are controlled by the IE-V850ES-G1, refer to the IE-V850ES-G1 User’s Manual (U16313E).
Figure 2-2. LEDs Controlled by IE-703217-G1-EM1
(1) Target RESET LED
(2) Target BVDD LED
(3) Target EVDD LED
LEDs controlled by IE-V850ES-G1
STATUS LED
(1) Target RESET LED
The status of the RESET signal connected to the target system is indicated as follows.
Lit (ON):
The target system is connected and the RESET signal is active (GND level).
Unlit (OFF): Either the target system is not connected, or the RESET signal is inactive (VDD level).
(2) Target BVDD LED
The status of the BVDD signal connected to the target system is indicated as follows.
Lit (ON):
The target system is connected, and voltage is being applied to the BVDD pin.
Unlit (OFF): Either the target system is not connected, or voltage is not being applied to the BVDD pin.
(3) Target EVDD LED
The status of the EVDD signal connected to the target system is indicated as follows.
Lit (ON):
The target system is connected and voltage is being applied to the EVDD pin.
Unlit (OFF): Either the target system is not connected, or voltage is not being applied to the EVDD pin.
18
User’s Manual U16594EJ1V0UM
CHAPTER 3 SWITCH SETTINGS
This chapter describes the settings of the switches of the IE-703217-G1-EM1.
3.1 Clock Settings
Table 3-1 lists the main clock settings. For the locations of OSC1 and X1, refer to Figure 2-1.
Since only the 32.768 kHz resonator on the IE-703217-G1-EM1 is connectable for the subclock, the oscillator
cannot be changed.
Table 3-1. Main Clock Settings
Main Clock Supply
OSC1
X1
Debugger Setting
− (don’t care)
Source
Capacitance Resonator
Capacitance
Resonator
− (don’t care)
(Settings at shipment:
Resonator: 4 MHz
Capacitance: 15 pF)
(Open)
(Open)
1
1
2
3
4
5
6
7
8
8
8-pin header (standard accessory)
2
3
4
5
6
7
OSC1
Mount oscillator
on X1 socket.
Oscillator on IE-703217-
G1-EM1
Set configuration clock to
Shorted pins
Shorted pins
“Internal”.
.
+5V
8
7
6
5
1
2
3
4
(Open) (Open)
(Open)
(Open)
1
2
3
4
5
6
7
8
Clock output
OSC1
Mount oscillator
on X1 socket.
Oscillator on target
system
Set configuration clock to
Shorted pins Shorted pins
“Target”.
Caution Always input a
square wave.
+5V
8
7
6
5
1
2
3
4
(Open) (Open)
(Open)
(Open)
1
2
3
4
5
6
7
8
Clock output
OSC1
19
User’s Manual U16594EJ1V0UM
CHAPTER 3 SWITCH SETTINGS
3.2 Pull-Up Resistor Settings
Table 3-2 lists the settings for pull-up resistor emulation, which is a mask option of the V850ES/KF1,
V850ES/KG1, and V850ES/KJ1. For the location of SW1, refer to Figure 2-1.
Table 3-2. Pull-Up Resistor Settings
SW1
Port
1
2
3
4
5
6
7
8
P36
P37
P38
P39
P614
P615
Not used
Not used
ON: Connect pull-up resistor.
OFF: Don’t connect pull-up resistor.
Remark All the settings are OFF at shipment.
20
User’s Manual U16594EJ1V0UM
CHAPTER 3 SWITCH SETTINGS
3.3 Power-ON Threshold Voltage Settings
The threshold voltage used to judge whether the target system is connected (hereafter called "power-ON
threshold voltage") is set to 1.7 V at shipment. (Refer to Figure 3-1 JP4 Settings at Shipment.) To change this
threshold voltage, insert a 4-pin jumper (standard accessory) on which resistors have been mounted to JP4 as
shown in Figure 3-2. For the location of JP4, refer to Figure 2-1.
Figure 3-1. JP4 Settings at Shipment
3.9 kΩ
2 kΩ
1
2
3
4
JP4
5 V
(1.7 V)
Voltage comparator
VDD from target system
Figure 3-2. Changing Power-ON Threshold Voltage
R1 R2
Split resistor
4-pin jumper
1
1
2
2
3
3
4
4
(standard accessory)
JP4
The threshold voltage can be obtained with the following equation.
Threshold voltage = 5 V × R2/(R1 + R2)
21
User’s Manual U16594EJ1V0UM
CHAPTER 3 SWITCH SETTINGS
3.4 Regulator Output Stabilization Capacitance Setting Jumpers
These are the jumpers for connecting the capacitance for stabilizing the output when using the regulator of the
V850ES/KF1, V850ES/KG1, or V850ES/KJ1. For the location of JP7 and JP8, refer to Figure 2-1. A 10 µF electrolytic
capacitor is mounted on JP8 at shipment.
Table 3-3. Regulator Output Stabilization Capacitance Settings
Regulator
Don’t use
JP7
JP8
− (don’t care)
(setting at shipment)
Use
+
Output stabilization
capacitance
2-pin jumper
1
1
2
2
(standard accessory)
JP8
To REGC pin of
emulation CPU
22
User’s Manual U16594EJ1V0UM
CHAPTER 4 SETUP PROCEDURE
This chapter describes how to connect the IE-703217-G1-EM1 and related products.
4.1 Removing Probe and Replacing Clock Module
<1> Hold the IE-703217-G1-EM1 by placing the fingers at the two locations indicated by the arrows and pull out
front cover 1.
Figure 4-1. Opening/Closing Cover Step 1 (Removing Front Cover 1)
Front cover 1
23
User’s Manual U16594EJ1V0UM
CHAPTER 4 SETUP PROCEDURE
<2> Then remove the probe and change the clock.
Figure 4-2. Opening/Closing Cover Step 1 (After Removing Front Cover 1)
24
User’s Manual U16594EJ1V0UM
CHAPTER 4 SETUP PROCEDURE
4.2 Removing Emulation Board
<1> Place the case down horizontally.
<2> Disconnect the power supply cable and the host interface cable.
<3> Refer to 4.1 Removing Probe and Replacing Clock Module for the procedure up to the removal of front
cover 1.
<4> Loosen the 2 screws indicated by the arrows.
Figure 4-3. Opening/Closing Cover Step 2 (Loosening Screws)
25
User’s Manual U16594EJ1V0UM
CHAPTER 4 SETUP PROCEDURE
<5> Holding front cover 2 down, lift the case using the hinges that connect front cover 2 to the rear panel of the
case until the case stands vertically.
Figure 4-4. Opening/Closing Cover Step 2 (Lifting Front Cover 2)
Front cover 2
26
User’s Manual U16594EJ1V0UM
CHAPTER 4 SETUP PROCEDURE
<6> Remove the 6 screws on the board indicated by the arrows, and replace the board.
Figure 4-5. Opening/Closing Cover Step 2 (After Lifting Front Cover 2)
27
User’s Manual U16594EJ1V0UM
CHAPTER 4 SETUP PROCEDURE
4.3 Probe Cable Connection
The probe cable is connected to the IE-703217-G1-EM1 at shipment. To remove the probe cable, use the
following procedure.
(1) To remove the probe cable
<1> Remove front cover 1 of the case.
<2> Remove the fixing screws from the EM1 board.
<3> Remove the probe cable fixing bracket. Proceed with caution when doing so as one end of the probe cable
fixing bracket covers the probe cable positioning mark.
<4> Remove the probe cable.
<5> Close front cover 1 of the case.
Figure 4-6. Probe Cable Attachment Position
IE-703217-G1-EM1 board
Probe cable
Fixing screw
Probe cable fixing bracket
GXP-AXK/KEL board
(2) To connect the probe cable
<1> Remove front cover 1 from the case.
<2> Insert the probe cable in the socket on the EM1 board.
<3> Connect the probe cable fixing bracket so that one end covers the probe cable positioning mark.
<4> Tighten the fixing screw.
<5> Close front cover 1 of the case.
28
User’s Manual U16594EJ1V0UM
CHAPTER 5 CAUTIONS
The following cautions apply to the IE-703217-G1-EM1.
•
Target system connection
Before connecting the IE-703217-G1-EM1 and the target system, be sure to set the power supply switch of the
IE-V850ES-G1 to OFF.
•
V850ES/KF1 emulation
To perform V850ES/KF1 emulation with the target board unconnected, do so after connecting the conversion
adapter (GEA) supplied with the EV-703210GK or EV-703210GC to the probe cable.
If emulation is performed without connecting a conversion adapter, the fixed bit values of the following ports
become undefined.
Bits 6 and 7 of port 3
Bits 2, 3, 4, 5, 10, 11, and 12 of port 9
29
User’s Manual U16594EJ1V0UM
CHAPTER 6 RESTRICTIONS
The following restrictions apply to the IE-703217-G1-EM1.
Permanent restrictions
(1) Clock generator
• Emulation of oscillation stabilization time after reset release
An oscillation stabilization time is inserted after reset release for the emulation target device, but no oscillation
stabilization time is inserted in the in-circuit emulator.
• Operating clock after reset
The operating clock after reset is fxx/8 in the emulation target device, but in the in-circuit emulator, there may
be a period during which the operating clock is not initialized to fxx/8. (This depends on the timing after reset
release.)
(2) Standby mode set/release timing
The standby mode set/release timing differs in the target device and the in-circuit emulator.
When the standby mode is set, the timing difference is 1 clock or less, and when it is released, the difference is 2
to 3 clocks.
(3) Timing of reset via watchdog timer
The reset timing using WDT1, WDT2 overflow differs for the target device and the in-circuit emulator.
• Operation during break
Since various peripheral functions operate even during breaks in the in-circuit emulator, differences in the
operations of the in-circuit emulator and the target device may occur.
(However, the watchdog timer counter stops during an in-circuit emulator break.)
30
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
From a functional aspect, the target interface (signals that connect the in-circuit emulator and target system)
appears to operate as if an actual device were connected, but there may be differences with the actual device from a
performance aspect. The target interface of this product can be any one of the interfaces described in Figures A-1 to
A-10. The processing of the target interface for each target device is described in Tables A-1 to A-3.
Figure A-1. Equivalent Circuit A
Target system side
IE system side
Port
pin
µPD70F3217
emulation CPU
Numbered port
(other than P9)
Figure A-2. Equivalent Circuit B
Target system side
Alphabetic port
IE system side
Same potential as BVDD
5 V
EP1K100FC484
(FPGA)
HD151015
(level shifter)
QS3384Q
(bus switch)
A
B
B
A
1 MΩ
Figure A-3. Equivalent Circuit C
Target system side
P9
IE system side
µPD70F3217
emulation CPU
P9
Same potential as BVDD 5 V
EP1K100FC484
(FPGA)
HD151015
A
B
(level shifter)
31
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Figure A-4. Equivalent Circuit D
Target system side
IE system side
V ,
EVDD
BVDD
DD
µPC393G2
(comparator)
,
IIx-
100 Ω
1 MΩ
µPC741G2
(operational
amplifier)
G6H-2F
+
(relayNote
)
0.1 µF
Note Conducts only when a target system is connected.
Figure A-5. Equivalent Circuit E
Target system side
IE system side
AVREF0
AVREF1
,
µPD70F3217
emulation CPU
G6H-2F
AVREFX
(relayNote
)
Note Conducts only when a target system is connected.
Figure A-6. Equivalent Circuit F
Target system side
IE system side
3.6 V applied only when target
system not connected
HSK120
HSK120
74VHCT00
RESET
1 MΩ
32
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Figure A-7. Equivalent Circuit G
5V
8
Target system side
VCC
IE system side
µPD70F3217
74HC157
OSC1
5
4
emulation CPU
1A
1B
2A
2B
1Y
1
2
X1
2Y
X1
X2
3
4
5
6
7
8
74LCX04
74LCX04
Open
X2
Figure A-8. Equivalent Circuit H
Target system side
AVSS
IE system side
,
,
AVSS
,
,
VSS,
VSS,
EVSS
BVSS
EVSS
BVSS
µPD70F3217
emulation CPU
33
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Figure A-9. Equivalent Circuit I
Same potential as VDD of
target system, or 5 V
Target system side
IE system side
VPP/IC
V
PP/IC
Open
Same potential as VDD of
target system, or 5 V
µPD70F3217
emulation CPU
JP7
3
REGC
REGC
2
1
Open
JP8
2
1
Figure A-10. Equivalent Circuit J
Target system side
IE system side
PD70F3217
µ
OSC2
emulation CPU
1
2
Open
3
XT2
XT1
XT2
XT1
4
1 MΩ
Open
5
6
7
34
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Table A-1. Pin Correspondence List (V850ES/KJ1 Pin Names) (1/4)
V850ES/KJ1
Pin No.
Target Interface Name
(V850ES/KJ1 Pin Name)
In-Circuit Emulator
Processing
1
AVREF0
AVSS
Equivalent circuit E
Equivalent circuit H
Equivalent circuit A
Equivalent circuit A
Equivalent circuit E
Equivalent circuit A
Equivalent circuit A
Equivalent circuit I
Equivalent circuit D
Equivalent circuit I
Equivalent circuit H
Equivalent circuit G
Equivalent circuit G
Equivalent circuit F
Equivalent circuit J
Equivalent circuit J
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit H
Equivalent circuit D
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
2
3
P10/ANO0
P11/ANO1
AVREF1
4
5
6
P00/TOH0
P01/TOH1
VPP/IC
7
8
9
VDD
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
REGC
VSS
X1
X2
RESET
XT1
XT2
P02/NMI
P03/INTP0
P04/INTP1
P05/INTP2
P06/INTP3
P40/SI00
P41/SO00
P42/SCK00
P30/TXD0
P31/RXD0
P32/ASCK0
P33/TI000/TO00
P34/TI001
P35/TI010/TO01
P36
P37
EVSS
EVDD
P38/SDA0
P39/SCL0
P50/TI011/RTP00/KR0
P51/TI50/RTP01/KR1
P52/TO50/RTP02/KR2
P53/SIA0/RTP03/KR3
35
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Table A-1. Pin Correspondence List (V850ES/KJ1 Pin Names) (2/4)
V850ES/KJ1
Pin No.
Target Interface Name
(V850ES/KJ1 Pin Name)
In-Circuit Emulator
Processing
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
P54/SOA0/RTP04/KR4
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
P55/SCKA0/RTP05/KR5
P60/RTP10
P61/RTP11
P62/RTP12
P63/RTP13
P64/RTP14
P65/RTP15
P66/SI02
P67/SO02
P68/SCK02
P69/TI040
P610/TI041
P611/TO04
P612/TI050
P613/TI051/TO05
P614
P615
P80/RXD2/SDA1
P81/TXD2/SCL1
P90/A0/TXD1/KR6
P91/A1/RXD1/KR7
P92/A2/TI020/TO02
P93/A3/TI021
P94/A4/TI030/TO03
P95/A5/TI031
P96/A6/TI51/TO51
P97/A7/SI01
P98/A8/SO01
P99/A9/SCK01
P910/A10/SIA1
P911/A11/SOA1
P912/A12/SCKA1
P913/A13/INTP4
P914/A14/INTP5
P915/A15/INTP6
PCD0
PCD1
PCD2
PCD3
36
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Table A-1. Pin Correspondence List (V850ES/KJ1 Pin Names) (3/4)
V850ES/KJ1
Pin No.
Target Interface Name
(V850ES/KJ1 Pin Name)
In-Circuit Emulator
Processing
81
82
PCS0/CS0
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit H
Equivalent circuit D
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
PCS1/CS1
PCS2/CS2
PCS3/CS3
PCM0/WAIT
PCM1/CLKOUT
PCM2/HLDAK
PCM3/HLDRQ
PCM4
83
84
85
86
87
88
89
90
PCM5
91
PCS4
92
PCS5
93
PCS6
94
PCS7
95
PCT0/WR0
PCT1/WR1
PCT2
96
97
98
PCT3
99
PCT4/RD
PCT5
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
PCT6/ASTB
PCT7
BVSS
BVDD
PDL0/AD0
PDL1/AD1
PDL2/AD2
PDL3/AD3
PDL4/AD4
PDL5/AD5
PDL6/AD6
PDL7/AD7
PDL8/AD8
PDL9/AD9
PDL10/AD10
PDL11/AD11
PDL12/AD12
PDL13/AD13
PDL14/AD14
PDL15/AD15
37
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Table A-1. Pin Correspondence List (V850ES/KJ1 Pin Names) (4/4)
V850ES/KJ1
Pin No.
Target Interface Name
(V850ES/KJ1 Pin Name)
In-Circuit Emulator
Processing
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
PDH0/A16
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
PDH1/A17
PDH2/A18
PDH3/A19
PDH4/A20
PDH5/A21
PDH6/A22
PDH7/A23
P715/ANI15
P714/ANI14
P713/ANI13
P712/ANI12
P711/ANI11
P710/ANI10
P79/ANI9
P78/ANI8
P77/ANI7
P76/ANI6
P75/ANI5
P74/ANI4
P73/ANI3
P72/ANI2
P71/ANI1
P70/ANI0
38
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Table A-2. Pin Correspondence List (V850ES/KG1 Pin Names) (1/3)
V850ES/KG1
Pin No.
Target Interface Name
(V850ES/KG1 Pin Name)
In-Circuit Emulator
Processing
1
AVREF0
AVSS
Equivalent circuit E
Equivalent circuit H
Equivalent circuit A
Equivalent circuit A
Equivalent circuit E
Equivalent circuit A
Equivalent circuit A
Equivalent circuit I
Equivalent circuit D
Equivalent circuit I
Equivalent circuit H
Equivalent circuit G
Equivalent circuit G
Equivalent circuit F
Equivalent circuit J
Equivalent circuit J
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit H
Equivalent circuit D
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
2
3
P10/ANO0
P11/ANO1
AVREF1
4
5
6
P00/TOH0
P01/TOH1
VPP/IC
7
8
9
VDD
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
REGC
VSS
X1
X2
RESET
XT1
XT2
P02/NMI
P03/INTP0
P04/INTP1
P05/INTP2
P06/INTP3
P40/SI00
P41/SO00
P42/SCK00
P30/TXD0
P31/RXD0
P32/ASCK0
P33/TI000/TO00
P34/TI001
P35/TI010/TO01
P36
P37
EVSS
EVDD
P38/SDA0
P39/SCL0
P50/TI011/RTP00/KR0
P51/TI50/RTP01/KR1
P52/TO50/RTP02/KR2
P53/SIA0/RTP03/KR3
39
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Table A-2. Pin Correspondence List (V850ES/KG1 Pin Names) (2/3)
V850ES/KG1
Pin No.
Target Interface Name
(V850ES/KG1 Pin Name)
In-Circuit Emulator
Processing
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
P54/SOA0/RTP04/KR4
Equivalent circuit A
Equivalent circuit A
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit H
Equivalent circuit D
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
P55/SCKA0/RTP05/KR5
P90/A0/TXD1/KR6
P91/A1/RXD1/KR7
P92/A2/TI020/TO02
P93/A3/TI021
P94/A4/TI030/TO03
P95/A5/TI031
P96/A6/TI51/TO51
P97/A7/SI01
P98/A8/SO01
P99/A9/SCK01
P910/A10/SIA1
P911/A11/SOA1
P912/A12/SCKA1
P913/A13/INTP4
P914/A14/INTP5
P915/A15/INTP6
PCS0/CS0
PCS1/CS1
PCM0/WAIT
PCM1/CLKOUT
PCM2/HLDAK
PCM3/HLDRQ
PCT0/WR0
PCT1/WR1
PCT4/RD
PCT6/ASTB
BVSS
BVDD
PDL0/AD0
PDL1/AD1
PDL2/AD2
PDL3/AD3
PDL4/AD4
PDL5/AD5
PDL6/AD6
PDL7/AD7
PDL8/AD8
PDL9/AD9
40
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Table A-2. Pin Correspondence List (V850ES/KG1 Pin Names) (3/3)
V850ES/KG1
Pin No.
Target Interface Name
(V850ES/KG1 Pin Name)
In-Circuit Emulator
Processing
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
PDL10/AD10
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
PDL11/AD11
PDL12/AD12
PDL13/AD13
PDL14/AD14
PDL15/AD15
PDH0/A16
PDH1/A17
PDH2/A18
PDH3/A19
PDH4/A20
PDH5/A21
P77/ANI7
P76/ANI6
P75/ANI5
P74/ANI4
P73/ANI3
P72/ANI2
P71/ANI1
P70/ANI0
41
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Table A-3. Pin Correspondence List (V850ES/KF1 Pin Names) (1/2)
V850ES/KF1
Pin No.
Target Interface Name
(V850ES/KF1 Pin Name)
In-Circuit Emulator
Processing
1
AVREF0
AVSS
Equivalent circuit E
Equivalent circuit H
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit I
Equivalent circuit D
Equivalent circuit I
Equivalent circuit H
Equivalent circuit G
Equivalent circuit G
Equivalent circuit F
Equivalent circuit J
Equivalent circuit J
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit H
Equivalent circuit D
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
2
3
P00/TOH0
4
P01/TOH1
5
P02/NMI
6
P03/INTP0
P04/INTP1
VPP/IC
7
8
9
VDD
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
REGC
VSS
X1
X2
RESET
XT1
XT2
P05/INTP2
P06/INTP3
P40/SI00
P41/SO00
P42/SCK00
P30/TXD0
P31/RXD0
P32/ASCK0
P33/TI000/TO00
P34/TI001
P35/TI010/TO01
P38/SDA0
P39/SCL0
EVSS
EVDD
P50/TI011/RTP00/KR0
P51/TI50/RTP01/KR1
P52/TO50/RTP02/KR2
P53/SIA0/RTP03/KR3
P54/SOA0/RTP04/KR4
P55/SCKA0/RTP05/KR5
P90/A0/TXD1/KR6
P91/A1/RXD1/KR7
P96/A6/TI51/TO51
42
User’s Manual U16594EJ1V0UM
APPENDIX A TARGET INTERFACE CHARACTERISTICS
Table A-3. Pin Correspondence List (V850ES/KF1 Pin Names) (2/2)
V850ES/KF1
Pin No.
Target Interface Name
(V850ES/KF1 Pin Name)
In-Circuit Emulator
Processing
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
P97/A7/SI01
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit C
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit B
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
Equivalent circuit A
P98/A8/SO01
P99/A9/SCK01
P913/A13/INTP4
P914/A14/INTP5
P915/A15/INTP6
PCS0/CS0
PCS1/CS1
PCM0/WAIT
PCM1/CLKOUT
PCM2/HLDAK
PCM3/HLDRQ
PCT0/WR0
PCT1/WR1
PCT4/RD
PCT6/ASTB
PDL0/AD0
PDL1/AD1
PDL2/AD2
PDL3/AD3
PDL4/AD4
PDL5/AD5
PDL6/AD6
PDL7/AD7
PDL8/AD8
PDL9/AD9
PDL10/AD10
PDL11/AD11
PDL12/AD12
PDL13/AD13
PDL14/AD14
PDL15/AD15
P77/ANI7
P76/ANI6
P75/ANI5
P74/ANI4
P73/ANI3
P72/ANI2
P71/ANI1
P70/ANI0
43
User’s Manual U16594EJ1V0UM
APPENDIX B EXTERNAL VIEWS
(1) EV-703210GC (for 80GC) Unit: mm
Dimensions with GX-Probe connected
Dimensions with IC mounted
39
24.1
32
21.8
25.3
14.4
12.8
7.2
7.2
Target connector for 80GC
17
C1.5
1
39
40
N
80-14-0.65
CTC APAN
2
1
2
TOP VIEW
BOTTOM VIEW
44
User’s Manual U16594EJ1V0UM
APPENDIX B EXTERNAL VIEWS
Conversion adapter for 80GC
C1.5
JAPAN
1
2
NEC CN2
1
39
40
JAPAN
49
50
1
2
1
2
703210GC-EA-B
2
40
49
1
703210GC-EA-B
2
19
1.6
3.2
1.6
TOP VIEW
BOTTOM VIEW
IC mounting adapter for 80GC
24.1
C2.0
3-R2.5
C1.5
20
39
1
TET
1
080SB
2
40
TOP VIEW
BOTTOM VIEW
45
User’s Manual U16594EJ1V0UM
APPENDIX B EXTERNAL VIEWS
(2) EV-703210GK (for 80GK) Unit: mm
Dimensions with GX-Probe connected
Dimensions with IC mounted
39
21.0
32
21.8
25.3
14.4
12.8
7.2
7.2
Target connector for 80GK
15
C1.5
1
GTC80
-12-0.5
2
1
AL JAPAN
2
TOP VIEW
BOTTOM VIEW
46
User’s Manual U16594EJ1V0UM
APPENDIX B EXTERNAL VIEWS
Conversion adapter for 80GK
C1.5
JAPAN
1
2
NEC
CN2
1
39
703210GK-EA-B
49
1
2
1
40
39
2
50
JAPAN
CN1-H
2
40
CN1-H
MR2
49
1
MR3
MR1
2
19
3.2
1.6
1.6
TOP VIEW
BOTTOM VIEW
IC mounting adapter for 80GK
21
18
3-R2.5
C2.0
C1.5
GMA80-12-0.5
1
TET
2
1
080SB
TOP VIEW
BOTTOM VIEW
47
User’s Manual U16594EJ1V0UM
APPENDIX B EXTERNAL VIEWS
(3) EV-703214GC (for 100GC) Unit: mm
Dimensions with GX-Probe connected
Dimensions with IC mounted
39
23
32
21.8
25.3
14.4
12.8
7.2
7.2
Target connector for 100GC
17
C1.5
1
GTC100
-14-0.5
2
1
JAPAN
2
TOP VIEW
BOTTOM VIEW
48
User’s Manual U16594EJ1V0UM
APPENDIX B EXTERNAL VIEWS
Conversion adapter for 100GC
19
C1.5
1
GEA100-14-0.5
NEC
CN2
49
50
50
1
2
GEA100-14-0.5
1
49
50
2
1
2
CN1
1
JAPAN
49
2
CN1
JAPAN
2
TOP VIEW
BOTTOM VIEW
IC mounting adapter for 100GC
20
23
C1.5
4-Ø3.2
GMA100-14-0.5
1
TET
2
1
100SD
TOP VIEW
BOTTOM VIEW
49
User’s Manual U16594EJ1V0UM
APPENDIX B EXTERNAL VIEWS
(4) EV-703217GJ (for 144GJ) Unit: mm
Dimensions with GX-Probe connected
Dimensions with IC mounted
39
32
29
21.8
25.3
14.4
12.8
7.2
7.2
Target connector for 144GJ
C1.5
23
1
49
TC-144-20-0.5
JAPAN
2
1
2
1
50
2
2
TOP VIEW
BOTTOM VIEW
50
User’s Manual U16594EJ1V0UM
APPENDIX B EXTERNAL VIEWS
Conversion adapter for 144GJ
19
C1.5
1
49
EA-144-20-0.5
CN3
49
1
2
CN3
EA-144-20-0.5
1
2
50
49
49
1
2
CN
2
2
CN1
1
50
49
1
JAPAN
50
CN1
JAPAN
2
TOP VIEW
BOTTOM VIEW
IC mounting adapter for 144GJ
3-R2.5
29
23
C2.0
1
49
TET
1
144 SD
2
1
2
50
TOP VIEW
BOTTOM VIEW
51
User’s Manual U16594EJ1V0UM
APPENDIX B EXTERNAL VIEWS
(5) Emulation probe cable Unit: mm
(44)
(400)
(39)
GXP-CABLE-TARGET
GXP-CABLE-EML
NEC
MADE IN JAPAN
JAPAN
NEC
3
52
User’s Manual U16594EJ1V0UM
相关型号:
©2020 ICPDF网 联系我们和版权申明