IN-P55TATRGB [ETC]
LED RGB CLEAR 6PLCC SMD;
| 型号： | IN-P55TATRGB |
| 厂家： | 
ETC |
| 描述： | LED RGB CLEAR 6PLCC SMD |
| 文件： | 总14页 (文件大小：1571K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Features
Description
•
•
5050 top view SMD LED
The IN-P55TATRGB is a popular low profile RGB
5050 package with versatile design capabilities. It is a
PLCC type LED which can be used in various
applications.
High Brightness
AlInGaP / InGaN Technology
Small package
•
•
•
•
High reliability
Clear Lens
Recommended Solder Pattern
Applications
•
•
•
•
Consumer Electronics
Light pipe application
Automobile After Market
Industrial Equipment
Figure 1. IN-P55TATRGB Solder Pattern
Package Dimensions in mm
Figure 2. IN-P55TATRGB Package Dimensions
ꢀ
Inolux Corporation
Proprietary & Confidential
April 26, 2017
www.inolux-corp.com
Page 1
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Absolute Maximum Rating at 25oC (Note 1)
Emission
Color
TOP (oC)
TST (oC)
Pd (mW)
IF (mA)
IFP* (mA)
VR (V)
Product
IN-P55TATRGB
IN-P55TATRGB
IN-P55TATRGB
Red
60
95
95
25
25
25
100ꢀ
100
100
5ꢀ
5
-40oC~+80oC -40oC~+85oC
-40oC~+80oC -40oC~+85oC
-40oC~+80oC -40oC~+85oC
Green
Blue
5
Notes
1. Condition for IFP is pulse of 1/10 duty and 0.1msec width
Electrical Characteristics TA = 25°C (Note 1)
Viewing
I*V(mcd)
Angle
VF(V)
λ(nm)
λP
Emission
Color
Product
IF(mA)
2θ1/2
min
1.6
2.8
2.8
max
2.4
3.4
3.4
λD
△λ
20
35
25
typ.
900
IN-P55TATRGB
IN-P55TATRGB
IN-P55TATRGB
Red
Green
Blue
20
20
20
624
520
468
632
525
470
120
120
120
1800
600
Notes
1. Performance guaranteed only under conditions listed in above tables.
ESD Precaution
ATTENTION: Electrostatic Discharge (ESD) protection
The symbol above denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even
though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based
chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly.
If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process.
ꢀ
Please be advised that normal static precautions should be taken in the handling and assembly of this device to prevent damage or degradation which
may be induced by electrostatic discharge (ESD).
Inolux Corporation
April 26, 2017
www.inolux-corp.com
ꢀ
Page 2
Proprietary & Confidential
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Luminous Intensity (Iv) Bin:
Color
Bin Code
B1
Spec. Range
600-700 mcd
700-800 mcd
800-900 mcd
900-1000 mcd
1000-1100 mcd
1100-1200 mcd
1500-1600 mcd
1600-1700 mcd
1700-1800 mcd
1800-1900 mcd
1900-2000 mcd
2000-2100 mcd
300-400 mcd
400-500 mcd
500-600 mcd
600-700 mcd
700-800 mcd
800-900 mcd
B2
B3
B4
B5
B6
E1
E2
E3
E4
E5
E6
H1
H2
H3
H4
H5
H6
Red
Green
Blue
@20mA / Ta=25O C, Tolerance: ± 10%
Dominant Wavelength (λD) Bin:
Color
Bin Code
A1
Spec. Range
620-625 nm
625-630 nm
630-635 nm
520-525 nm
525-530 nm
530-535 nm
460-465 nm
465-470 nm
470-475 nm
Red
A2
A3
D1
D2
D3
G1
G2
G3
Green
Blue
ꢀ
ꢀ Forward Voltage (Vf) Bin:
Color
Bin Code
C0
Spec. Range
1.80-2.00 V
2.00-2.20 V
2.20-2.40 V
2.80-3.00 V
3.00-3.20 V
3.20-3.40 V
2.80-3.00 V
3.00-3.20 V
3.20-3.40 V
Red
C1
C2
F1
F2
F3
V1
V2
V3
Green
Blue
ꢀ
Inolux Corporation
April 26, 2017
Page 3
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Typical Characteristic Curves-Red
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
ꢀ
ꢀ
ꢀ
Inolux Corporation
Proprietary & Confidential
April 26, 2017
Page 4
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Typical Characteristic Curves-Green
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀꢀꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Inolux Corporation
April 26, 2017
Page 5
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Typical Characteristic Curves-Blue
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Inolux Corporation
April 26, 2017
Page 6
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Ordering Information
Forward
Luminous Intensity
IV (mcd)
Test Current
IF (mA)
Voltage
VF (V)
(Typ.)
Orderable
Part Number
Product
Emission Color Technology
(Typ.)
Red
Green
Blue
AlInGaP
InGaN
20ꢀ
20
20
900ꢀ
1800
600
2.0ꢀ
3.2ꢀ
3.2ꢀ
IN-P55TATRGB
IN-P55TATRGB
InGaN
•
Bin Range specified on page 3.
ꢀ
Inolux Corporation
April 26, 2017
www.inolux-corp.com
Page 7
Proprietary & Confidential
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Label Specifications
ꢀ
Inolux P/N:ꢀ
Iꢀ Nꢀ -ꢀ
Pꢀ
5ꢀ
5ꢀ
TAꢀ
Tꢀ
Rꢀ Gꢀ Bꢀ -ꢀ Xꢀ Xꢀ Xꢀ Xꢀ
ꢀ
Customizedꢀꢀ
Materialꢀ
Packageꢀ
Variationꢀ
Orientationꢀ
Currentꢀ
Lensꢀ
Colorꢀ
ꢀ
ꢀ
Stamp-offꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
(Blank)ꢀ=ꢀ
20mAꢀ
perꢀChipꢀꢀ
R=632nmꢀ
G=520nmꢀ
B=470nmꢀ
Inoluxꢀ
SMDꢀ
Pꢀ=ꢀꢀPLCCꢀ
Typeꢀ
Tꢀ=ꢀTopꢀ
Mountꢀ
55TAꢀ=ꢀ5.0ꢀxꢀ5.5ꢀxꢀ1.5ꢀmmꢀ
(Blank)ꢀ=ꢀClearꢀ
ꢀ
ꢀ
Lot No.:
Zꢀ
2ꢀ
0ꢀ
1ꢀ
7ꢀ
01ꢀ
24ꢀ
001ꢀ
Serialꢀ
Internalꢀ
Trackerꢀ
Yearꢀ(2017,ꢀ2018,ꢀ…..)ꢀ
Monthꢀ
Dateꢀ
ꢀ
Inolux Corporation
April 26, 2017
www.inolux-corp.com
Page 8
Proprietary & Confidential
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Packaging Information: 1000pcs Per Reel
Tape Dimension
Reel Dimension
ꢀ
Inolux Corporation
April 26, 2017
Page 9
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Packing Dimension
5 boxes per carton are available depending on shipment quantity.
Specification
Material
Quantity
Carrier tape
Reel
Label
Per EIA 481-1A specs
Per EIA 481-1A specs
IN standard
Conductive black tape
Conductive black
Paper
1000pcs per reel
Packing bag
Carton
220x240mm
IN standard
Aluminum laminated bag/ no-zipper
Paper
One reel per bag
Non-specified
Others:
Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same
bin combinations of Iv, λD and Vf. Each reel has a label identifying its specification; the immediate box consists
of a product label as well.
ꢀ
ꢀ
Inolux Corporation
Proprietary & Confidential
April 26, 2017
www.inolux-corp.com
Page 10
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Dry Pack
All SMD optical devices are MOISTURE SENSITIVE. Avoid exposure to moisture at all times during
transportation or storage. Every reel is packaged in a moisture protected anti-static bag. Each bag is properly
sealed prior to shipment.
Upon request, a humidity indicator will be included in the moisture protected anti-static bag prior to shipment.
The packaging sequence is as follows:
ꢀ
ꢀ
Reflow Soldering
• Recommended tin glue specifications: melting temperature in the range of 178~192 OC
• The recommended reflow soldering profile is as follows (temperatures indicated are as measured on
the surface of the LED resin):
Lead-free Solder Profile
ꢀ
Inolux Corporation
April 26, 2017
Page 11
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Precautions
•
•
•
Avoid exposure to moisture at all times during transportation or storage.
Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products.
It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid applying a
reverse voltage.
•
•
•
Avoid operation beyond the limits as specified by the absolute maximum ratings.
Avoid direct contact with the surface through which the LED emits light.
If possible, assemble the unit in a clean room or dust-free environment.
ꢀ
Reworking
•
•
•
Rework should be completed within 5 seconds under 260 OC.
The iron tip must not come in contact with the copper foil.
Twin-head type is preferred.
Cleaning
Following are cleaning procedures after soldering:
•
•
•
•
An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.
Temperature x Time should be 50oC x 30sec. or <30oC x 3min
Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter
Curing: 100 OC max, <3min
Cautions of Pick and Place
• Avoid stress on the resin at elevated temperature.
•
•
Avoid rubbing or scraping the resin by any object.
Electro-static may cause damage to the component. Please ensure that the equipment is properly
grounded. Use of an ionizer fan is recommended.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Inolux Corporation
April 26, 2017
Page 12
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Reliability
Frequency/ lots/ samples/ Standards
Conditions
Item
failures
Reference
J-STD-020
For all reliability
monitoring tests according
to JEDEC Level 2
1Q/ 1/ 22/ 0
1.) Baking at 85°C for 24hrs
2.) Moisture storage at 85°C/ 60% R.H. for
168hrs
Accelerated aging 155°C/ 24hrs
Tinning speed: 2.5+0.5cm/s
Tinning: A: 215°C/ 3+1s or B: 260°C/ 10+1s
Dipping soldering terminal only
Soldering bath temperature
A: 260+/-5°C; 10+/-1s
Precondition
Solderability
JESD22-B102-B
And CNS-5068
CNS-5067
Resistance to
soldering heat
B: 350+/-10°C; 3+/-0.5s
1.) Precondition: 85°C baking for 24hrs
85°C/ 60%R.H. for 168hrs
2.) Tamb25°C; IF=20mA; duration 1000hrs
Tamb: 85°C
Humidity: 85% R.H., IF=5mA
Duration: 1000hrs
Tamb: 55°C
1Q/ 1/ 40/ 0
1Q/ 1/ 45/ 0
1Q/ 1/ 20
CNS-11829
JESD-A101-B
IN specs.
Operating life test
High humidity,
high temperature
bias
High temperature
bias
IF=20mA
Duration: 1000hrs
1Q/ 1/ 40/ 0
1Q/ 1/ 76/ 0
Tamb25°C, If=20mA,, Ip=100mA, Duty
cycle=0.125 (tp=125μs,T=1sec)
Duration 500hrs)
A cycle: -40 degree C 15min; +85 degree C
15min
Pulse life test
JESD-A104-A
IEC 68-2-14, Nb
Temperature
cycle
Thermal steady within 5 min..
300 cycles
2 chamber/ Air-to-air type
60+3°C
90+5/-10% R.H. for 500hrs
100+10°C for 500hrs
High humidity
storage test
High temperature 1Q/ 1/ 40/ 0
storage test
Low temperature 1Q/ 1/ 40/ 0
storage test
1Q/ 1/ 40/ 0
CNS-6117
CNS-554
CNS-6118
-40+5°C for 500hrs
ꢀ
Inolux Corporation
April 26, 2017
www.inolux-corp.com
Page 13
Proprietary & Confidential
ꢀ
ꢀ
ꢀ
ꢀ
IN-P55TATRGB
1.5mm 5050 PLCC-6 Top View
Revision History
Changes since last revision
Page
Version No.
Revision Date
Initial Release
1.0
04-26-2017
DISCLAIMER
INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design. INOLUX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights, nor the rights of others.
LIFE SUPPORT POLICY
INOLUX’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the
President of INOLUX or INOLUX CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or system, or to affect its safety or effectiveness.
ꢀ
Inolux Corporation
April 26, 2017
Page 14
Proprietary & Confidential
www.inolux-corp.com
相关型号：
©2020 ICPDF网 联系我们和版权申明