IN-S42ATG [ETC]
LED GREEN CLEAR 0402 SMD;
ETC 
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Features
Description
•
•
0402 0.45mm SMD LED
The IN-S42AT series is a popular low profile 0402
package with versatile design capabilities. It is a PCB
type molding style LED which can be used in various
applications.
High Brightness
AlInGaP / InGaN Technology
Small package
•
•
•
•
High reliability
Clear Lens
Recommended Solder Pattern
Applications
•
•
•
•
Consumer Electronics
Wearables
Automobile After Market
Industrial Equipment
Figure 1. IN-S42AT Solder Pattern
Package Dimensions in mm
Figure 2. IN-S42AT Package Dimensions
ꢀ
Page 1
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Absolute Maximum Rating at 25oC (Note 1)
Emission
Color
TOP (oC)
TST (oC)
Pd (mW)
IF (mA)
IFP* (mA)
VR (V)
Product
IN-S42ATYG Yellow Green
-30oC~+80oC -40oC~+85oC
-30oC~+80oC -40oC~+85oC
-30oC~+80oC -40oC~+85oC
-30oC~+80oC -40oC~+85oC
-30oC~+80oC -40oC~+85oC
-30oC~+80oC -40oC~+85oC
-30oC~+80oC -40oC~+85oC
78
25
100ꢀ
100ꢀ
100ꢀ
100ꢀ
100
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
5ꢀ
IN-S42ATY
IN-S42ATA
IN-S42ATR
IN-S42ATB
IN-S42ATG
IN-S42ATUW
Yellow
Amber
Red
78ꢀ
25ꢀ
25ꢀ
25ꢀ
25
78ꢀ
78ꢀ
Blue
100
100ꢀ
100ꢀ
Green
White
25
100ꢀ
100ꢀ
25ꢀ
Notes
1. Condition for IFP is pulse of 1/10 duty and 0.1msec width
ESD Precaution
ATTENTION: Electrostatic Discharge (ESD) protection
The symbol above denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even
though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based
chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly.
If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process.
ꢀ
Please be advised that normal static precautions should be taken in the handling and assembly of this device to prevent damage or degradation which
may be induced by electrostatic discharge (ESD).
ꢀ
Page 2
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Electrical Characteristics TA = 25°C (Note 1)
Viewing
VF(V)
λ(nm)
λP
I*V(mcd)
typ.
Angle
Emission
Color
Product
IF(mA)
2θ1/2
typ.
max
λD
△λ
IN-S42ATYG Yellow Green 20
1.9
2.6
572
592
605
631
470
525
575
593
610
645
468
523
-
-
-
-
-
-
-
-
130
130
130
130
120
130
130
28.5
145
145
90
IN-S42ATY
IN-S42ATA
IN-S42ATR
IN-S42ATB
IN-S42ATG
IN-S42ATUW
Yellow
Amber
Red
20ꢀ
20ꢀ
20ꢀ
20ꢀ
20ꢀ
20ꢀ
2.0ꢀ
2.1ꢀ
2.1ꢀ
3.1ꢀ
3.3ꢀ
3.1ꢀ
2.6ꢀ
2.6ꢀ
2.6ꢀ
4.0ꢀ
4.0ꢀ
4.0ꢀ
Blue
100
450
600
Green
White
X=0.295
Y=0.30
Notes
1. Performance guaranteed only under conditions listed in above tables.
ꢀ
Page 3
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Chromaticity Bin (for White only)
BIN
R27
CIE
X
Top
0.275
0.27
Right
0.285
0.28
Bottom
0.305
0.28
Left
0.295
0.27
BIN
R28
CIE
X
Top
0.28
0.28
0.29
0.3
Right
0.29
0.29
0.3
Bottom
0.31
Left
0.3
Y
Y
0.29
0.28
0.31
0.3
X
0.285
0.29
0.295
0.3
0.315
0.3
0.305
0.29
X
0.32
R29
R31
R30
Y
Y
0.31
0.31
X
0.295
0.31
0.305
0.32
0.325
0.32
0.315
0.31
Y
ꢀ
Page 4
Inolux Corporation
Proprietary & Confidential
April 25, 2017
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Typical Characteristic Curves – YG, Y, A, R
ꢀ
ꢀ
ꢀ
ꢀ
Page 5
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Typical Characteristic Curves – B, G, W
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Page 6
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Typical Characteristic Curves – Radiation Pattern
ꢀ
ꢀ
ꢀ
Ordering Information
Forward
Voltage
VF (V)
Luminous Intensity
Technolog Test Current
Orderable
Part Number
Product
Emission Color
IV (mcd)
(Typ.)
y
IF (mA)
(Typ.)
IN-S42ATYG Yellow Green
AllnGaP
AllnGaP
AllnGaPꢀ
AllnGaPꢀ
InGaN
20
36
1.9
IN-S42ATYG
IN-S42ATY
IN-S42ATA
IN-S42ATR
IN-S42ATB
IN-S42ATG
IN-S42ATUW
IN-S42ATY
IN-S42ATA
IN-S42ATR
IN-S42ATB
IN-S42ATG
IN-S42ATUW
Yellow
Amber
Red
20ꢀ
20ꢀ
20ꢀ
20ꢀ
20ꢀ
20ꢀ
90ꢀ
2.0ꢀ
2.1ꢀ
2.1ꢀ
3.1ꢀ
3.3ꢀ
3.1ꢀ
90ꢀ
90ꢀ
Blue
100ꢀ
360ꢀ
600ꢀ
Green
White
InGaN
InGaNꢀ
ꢀ
Page 7
Inolux Corporation
April 25, 2017
www.inolux-corp.com
Proprietary & Confidential
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Label Specifications
ꢀ
Inolux P/N:ꢀ
Iꢀ Nꢀ -ꢀ
Sꢀ
4ꢀ
2ꢀ
Aꢀ
Tꢀ
Xꢀ
-ꢀ Xꢀ Xꢀ Xꢀ Xꢀ
ꢀ
ꢀ
Customizedꢀꢀ
Materialꢀ
Packageꢀ
Variationꢀ
Orientationꢀ
Currentꢀ
Lensꢀ
Colorꢀ
Stamp-offꢀ
ꢀ
R=645mꢀ
A=610nmꢀ
Y=593nmꢀ
YG=575nmꢀ
G=523nmꢀ
B=468nmꢀ
W=Whiteꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Inoluxꢀ
ꢀ
(Blank)ꢀ=ꢀ
20mAꢀ
ꢀ
Sꢀ=ꢀPCBꢀ
Typeꢀ
ꢀ
42Aꢀ=ꢀ1.0ꢀxꢀ0.5ꢀxꢀ
(Blank)ꢀ=ꢀClearꢀ
Uꢀ=ꢀDiffusedꢀ
ꢀ
Tꢀ=ꢀTopꢀMountꢀ
ꢀ
SMDꢀ
0.45mmꢀ
ꢀ
ꢀ
ꢀ
5=5mAꢀ
Lot No.:
Zꢀ
2ꢀ
0ꢀ
1ꢀ
7ꢀ
01ꢀ
24ꢀ
001ꢀ
Internalꢀ
Trackerꢀ
Yearꢀ(2017,ꢀ2018,ꢀ…..)ꢀ
Monthꢀ
Dateꢀ
Serialꢀ
ꢀ
Page 8
Inolux Corporation
April 25, 2017
www.inolux-corp.com
Proprietary & Confidential
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Packaging Information: 5000pcs Per Reel
Tape Dimension
Reel Dimension
ꢀ
Page 9
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Packing Dimension
ꢀ
Page 10
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Dry Pack
All SMD optical devices are MOISTURE SENSITIVE. Avoid exposure to moisture at all times during
transportation or storage. Every reel is packaged in a moisture protected anti-static bag. Each bag is properly
sealed prior to shipment.
Upon request, a humidity indicator will be included in the moisture protected anti-static bag prior to shipment.
The packaging sequence is as follows:
ꢀ
ꢀ
Reflow Soldering
• Recommended tin glue specifications: melting temperature in the range of 178~192 OC
• The recommended reflow soldering profile is as follows (temperatures indicated are as measured on
the surface of the LED resin):
Lead-free Solder Profile
ꢀ
Page 11
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Precautions
•
•
•
Avoid exposure to moisture at all times during transportation or storage.
Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products.
It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid applying a
reverse voltage.
•
•
•
Avoid operation beyond the limits as specified by the absolute maximum ratings.
Avoid direct contact with the surface through which the LED emits light.
If possible, assemble the unit in a clean room or dust-free environment.
ꢀ
Reworking
•
•
•
Rework should be completed within 5 seconds under 260 OC.
The iron tip must not come in contact with the copper foil.
Twin-head type is preferred.
Cleaning
Following are cleaning procedures after soldering:
•
•
•
•
An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.
Temperature x Time should be 50oC x 30sec. or <30oC x 3min
Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter
Curing: 100 OC max, <3min
Cautions of Pick and Place
• Avoid stress on the resin at elevated temperature.
•
•
Avoid rubbing or scraping the resin by any object.
Electro-static may cause damage to the component. Please ensure that the equipment is properly
grounded. Use of an ionizer fan is recommended.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Page 12
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Reliability
Frequency/ lots/ samples/ Standards
Conditions
Item
failures
Reference
J-STD-020
For all reliability
monitoring tests according
to JEDEC Level 2
1Q/ 1/ 22/ 0
1.) Baking at 85°C for 24hrs
2.) Moisture storage at 85°C/ 60% R.H. for
168hrs
Accelerated aging 155°C/ 24hrs
Tinning speed: 2.5+0.5cm/s
Tinning: A: 215°C/ 3+1s or B: 260°C/ 10+1s
Dipping soldering terminal only
Soldering bath temperature
A: 260+/-5°C; 10+/-1s
Precondition
Solderability
JESD22-B102-B
And CNS-5068
CNS-5067
Resistance to
soldering heat
B: 350+/-10°C; 3+/-0.5s
1Q/ 1/ 40/ 0
1Q/ 1/ 45/ 0
1Q/ 1/ 20
CNS-11829
JESD-A101-B
IN specs.
1.) Precondition: 85°C baking for 24hrs
85°C/ 60%R.H. for 168hrs
2.) Tamb25°C; IF=20mA; duration 1000hrs
Tamb: 85°C
Humidity: 85% R.H., IF=5mA
Duration: 1000hrs
Tamb: 55°C
IF=20mA
Duration: 1000hrs
Operating life test
High humidity,
high temperature
bias
High temperature
bias
1Q/ 1/ 40/ 0
Tamb25°C, If=20mA,, Ip=100mA, Duty
cycle=0.125 (tp=125μs,T=1sec)
Pulse life test
Duration 500hrs)
1Q/ 1/ 76/ 0
1Q/ 1/ 40/ 0
JESD-A104-A
IEC 68-2-14, Nb
A cycle: -40 degree C 15min; +85 degree C
15min
Thermal steady within 5 min..
300 cycles
2 chamber/ Air-to-air type
60+3°C
90+5/-10% R.H. for 500hrs
100+10°C for 500hrs
Temperature
cycle
High humidity
storage test
CNS-6117
CNS-554
CNS-6118
High temperature 1Q/ 1/ 40/ 0
storage test
Low temperature 1Q/ 1/ 40/ 0
storage test
-40+5°C for 500hrs
ꢀ
Page 13
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
ꢀ
ꢀ
ꢀ
ꢀ
IN-S42AT series
Top View SMD LED 0402 PCB Type
Revision History
Changes since last revision
Initial Release
Page
Version No.
Revision Date
02-07-2017
04-25-2017
1.0
1.1
Format Update
DISCLAIMER
INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design. INOLUX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights, nor the rights of others.
LIFE SUPPORT POLICY
INOLUX’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the
President of INOLUX or INOLUX CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or system, or to affect its safety or effectiveness.
ꢀ
Page 14
Inolux Corporation
April 25, 2017
Proprietary & Confidential
www.inolux-corp.com
相关型号：
©2020 ICPDF网 联系我们和版权申明