IPC1FAD2L0B [ETC]
Pushbutton switches for harsh environments - bushing à 12 mm - momentary;型号: | IPC1FAD2L0B |
厂家: | ETC |
描述: | Pushbutton switches for harsh environments - bushing à 12 mm - momentary |
文件: | 总7页 (文件大小:357K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Distinctive features and specifications
UG1212-A-R1
K
K
K
K
K
Illuminated or non-illuminated
Tactile feedback
Wide variety of configurations
Flat round actuator for optional marking
Sealed to IP67
B1
ENVIRONMENTAL SPECIFICATIONS
GENERAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Panel thickness : 1,5 mm (.059) min.
4 mm (.157 max.)
• Total travel :
Funct. 3 : 1,7 mm (.067) +/- 0,3 mm
Funct. 5 : 1,3 mm (.051) +/- 0,3 mm
• Typical operating force : 6N +/- 2N
• Low level/mech. life : 1.000.000 cycles
• Torque : 1,5 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.
• Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
• Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load (gold plated silver contacts):
MATERIALS
5A 28VDC, 70.000 cycles
For W terminals, current has to
0,2A 48VDC, 500.000 cycles
be limited to 400mA.
• Case : thermoplastic UL94-V0
• Actuator : polyamide 6/6
0,5A 48VAC, 500.000 cycles
• Bushing/bezel : zinc die-cast
(zamac), black painted
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.500 Vrms
• Contacts : silver, gold plated (std)
brass, gold plated (for option 104)
• Contact bounce : 10 ms
• Output wires (flying lead terminals)
:
F version : AWG20, section 0,6 mm2
Wversion:AWG24, section0,23mm2
LED wires :
LED COMPONENT SPECIFICATIONS
LED colour
Super red (L0S)
Yellow (L0Y)
Green (L0G)
Blue (L0B)
Forward current Typ. forward voltage Max. forward voltage
•
20mA
20mA
20mA
20mA
20mA
2,1V
2,1V
2,1V
3,2V
3,35V
2,3V
2,3V
2,3V
3,8V
4,25V
F version : AWG26, section 0,12 mm2
Wversion:AWG24, section0,23mm2
• Lens : polycarbonate
• Terminal seal : epoxy
White (L0W)
AGENCY APPROVAL
A resistor must be series-connected by the user.
2A 125VAC/250VAC
File E83438
supply voltage - LED forward voltage
LED forward current
Resistor value =
See following pages.
MOUNTING
Panel cut-out
Matrix mounting
Back of panel space requirement
20.00
(.787)
20.00
(.787)
12.90
(.507)
1
Ø13.60
(.535DIA)
Ø13.50
(.531DIA)
O-ring
APEM
www.apem.com
B1-15
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Overview
IP
SERIES
Electrical functions
Terminals
Solder lugs
Flying leads, standard
Flying leads, thin NEW!
Straight PC
Contacts
Actuator shapes
3
5
Normally open
(NO)
NC/NO combined
(non-illuminated)
S
F
W
P
AD Silver, gold
C
Square
plated (standard)
CD Brass, gold
plated (option 104)
R
P
Round, curved
Round, flat
Z1 Quick-connect
(non-ill., NO only )
B1
Actuator colours
LED colours
Options
Approval
UL
1
B
2
3
4
5
6
Blue
Blank Non-illum.
100 Satin chrome
bezel
101 Bright chrome
bezel
Dark blue
Black
Green
Grey
Yellow
Red
L0S
L0Y
Super red
Yellow
L0G Green
L0B Blue
L0W White
Consult factory for
detail of approved
models.
104 High actuator
(non-illum. round
models only)
7/1 White
8
9
A
Bright chrome
Orange
Satin chrome
Option 104
If combined with electrical function 5 (NC/NO), this
option should be ordered with CD contacts (brass, gold
plated). Current/voltage rating : 100mA 30VDC
ABOUT THIS SERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
A sealing boot is available to protect the switches against frost and sand. It is presented after the IA series and in section H.
Mounting accessories : Standard hardware supplied : 1 hex nut 14 mm (.551) across flats and 1 O-ring.
Hex nut part number U166.
Packaging unit : 25 pieces
B1-16
www.apem.com
APEM
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Square - illuminated
• High brightness illumination
• Five LED colours
• Tin plated LED terminals
LED
Cathode
(-)
MODEL
STRUCTURE
B1
Shown with standard flying lead terminals.
Flat
©
Solder lug terminals
12.00
(.472SQ)
17.50
(.688SQ)
IPC3SAD
Normally Open
Ø12.00x0.75SI
(.472DIAx0.75IS)
EPOXY
1.20
0.40
(.015)
(.047)
2.00
5.08
(.078)
(.200)
Also available with straight PC terminals : IPC3PAD
LED colour is indicated by the bottom of the switch.
Flat
©
Sealed flying lead terminals
12.00
(.472SQ)
17.50
(.688SQ)
IPC3FAD
Normally Open
Ø12.00x0.75SI
(.472DIAx0.75IS)
For THIN flying leads, replace F with W.
Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode(-)
ACTUATOR COLOURS
LED COLOURS
1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey
5 : yellow - 6 : red - 7/1 : white - 8 : bright chrome
9 : orange - A : satin chrome
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
L0W : white
OPTIONS
APPROVAL
100 : Satin chrome bezel
101 : Bright chrome bezel
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
APEM
www.apem.com
B1-17
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Square - non-illuminated
• Double function (NC/NO combined)
with a short behind-panel depth
Straight P
Quick-connect Z1
1.00
(.039)
1.20
(.047)
2.80
(.110)
Function 3 (N0)
Function 5 (NC/NO)
MODEL
STRUCTURE
B1
Shown with standard flying lead terminals.
Flat
©
Solder lug terminals
12.00
(.472SQ)
17.50
(.688SQ)
IPC3SAD
IPC5SAD
Normally Open
Ø12.00x0.75SI
(.472DIAx0.75IS)
NC/NO combined
NO
NC
NO
EPOXY
1.20
0.40
(.015)
(.047)
2.00
5.08
NO
NC/NO
(.078)
(.200)
Also available with straight PC terminals : IPC3PAD (NO) or IPC5PAD (NC/NO)
and quick-connect terminals : IPC3Z1AD (NO only)
Flat
©
Sealed flying lead terminals
12.00
(.472SQ)
17.50
(.688SQ)
IPC3FAD
IPC5FAD
Normally Open
Ø12.00x0.75SI
(.472DIAx0.75IS)
NC/NO combined
For THIN flying leads, replace F with W.
NO
NC/NO
Wire colours (NC/NO) : black : NO, blue : NC
ACTUATOR COLOURS
1 : blue - B : dark blue -2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red - 7/1 : white - 8 : bright chrome
9 : orange - A : satin chrome
OPTIONS
APPROVAL
100 : Satin chrome bezel
101 : Bright chrome bezel
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
B1-18
www.apem.com
APEM
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Round - illuminated
• High brightness illumination
• Five LED colours
• Tin plated LED terminals
LED
Cathode
(-)
LED
Cathode
(-)
MODEL
STRUCTURE
B1
Shown with standard flying lead terminals.
Flat
©
Solder lug terminals
Ø12.00
(.472DIA)
Ø17.50
(.688DIA)
IPR3SAD
Normally Open
Ø12.00x0.75SI
(.472DIAx0.75IS)
EPOXY
1.20
0.40
(.015)
(.047)
2.00
5.08
(.078)
(.200)
Also available with straight PC terminals : IPR3PAD
LED colour is indicated by the bottom of the switch.
Flat
©
Sealed flying lead terminals
Ø12.00
(.472DIA)
Ø17.50
(.688DIA)
Ø12.00x0.75SI
(.472DIAx0.75IS)
IPR3FAD
Normally Open
For THIN flying leads, replace F with W.
Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode(-)
ACTUATOR COLOURS
LED COLOURS
1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey
5 : yellow - 6 : red - 7/1 : white - 8 : bright chrome
9 : orange - A : satin chrome
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
L0W : white
OPTIONS
APPROVAL
100 : Satin chrome bezel
101 : Bright chrome bezel
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
APEM
www.apem.com
B1-19
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Round - non-illuminated
• Double function (NC/NO combined)
with a short behind-panel depth
Straight P
Quick-connect Z1
1.00
(.039)
1.20
(.047)
2.80
Function 3 (NO) Function 5 (NC/NO)
(.110)
MODEL
STRUCTURE
Shown with standard flying lead terminals.
B1
Actuator marking available on IPP models (symbol 10 mm max.). On request.
Flat
©
Solder lug terminals
Ø17.50
(.688DIA)
Ø12.00
(.472DIA)
Curved actuator, NO
IPR3SAD
Curved actuator, NC/NO
IPR5SAD
Ø12.00x0.75SI
(.472DIAx0.75IS)
Flat actuator, NO
IPP3SAD
Flat actuator, NC/NO
IPP5SAD
NO
NO
NC
EPOXY
1.20
(.047)
0.40
(.015)
2.00
(.078)
5.08
(.200)
NO
NC/NO
Also available with straight PC terminals : IP•3PAD (NO) or IP•5PAD (NC/NO)
and quick-connect terminals : IP•3Z1AD (NO only)
Flat
©
Sealed flying lead terminals
Ø17.50
(.688DIA)
Ø12.00
(.472DIA)
Curved actuator, NO
IPR3FAD
Curved actuator, NC/NO
IPR5FAD
Ø12.00x0.75SI
(.472DIAx0.75IS)
Flat actuator, NO
IPP3FAD
Flat actuator, NC/NO
IPP5FAD
NO
NC/NO
For THIN flying leads, replace F with W.
Wire colours (NC/NO) : black : NO, blue : NC
ACTUATOR COLOURS
OPTIONS
100 : Satin chrome bezel
101 : Bright chrome bezel
1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey
5 : yellow - 6 : red - 7/1 : white - 8 : bright chrome
9 : orange - A : satin chrome
104 : High actuator - If combined with function 5
(NC/NO), order with CD contacts (instead of AD contacts).
APPROVAL
Ø12.00
Ø12.00
(.472DIA)
(.472DIA)
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
104 IPR
104 IPP
B1-20
www.apem.com
APEM
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
IPC1FAD2 IPC1FAD2L0G IPC1FAD2L0Y IPC1FAD6 IPC1SAD1L0G IPC1SAD1L0Y IPC1SAD2 IPC1SAD3L0G
IPC1SAD6 IPC1SAD6L0S IPR1FAD2 IPR1FAD2L0G IPR1FAD2L0Y IPR1FAD3L0G IPR1FAD6 IPR1FAD6L0S
IPR1SAD1L0Y IPR1SAD2L0G IPR1SAD2L0S IPR1SAD2L0Y IPR1SAD3 IPR1SAD3L0G IPR1SAD5
IPR1SAD5104 IPR1SAD5L0S IPR1SAD6 IPR1SAD6104 IPR1SAD6L0S IPR1SAD2 IPC1SAD2L0S IPR1FAD2L0S
IPR1SAD7/1L0S IPC1FAD2L0B IPC1Z1AD2L0B IPR1Z1AD1L0Y IPR1SAD5-LOS IPR1SAD2L0B IPR1SAD9LOS
相关型号:
©2020 ICPDF网 联系我们和版权申明