ITS-P-09010NW [ETC]
1.2 mm Pitch, Low Profile âSwing Lockâ Wire to Board Connector for Power Supply; 1.2毫米间距,低配置文件????摇摆洛卡????线对板连接器电源型号: | ITS-P-09010NW |
厂家: | ETC |
描述: | 1.2 mm Pitch, Low Profile âSwing Lockâ Wire to Board Connector for Power Supply |
文件: | 总10页 (文件大小:610K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ITS-P-09010NW (Page 1 of 10)
DF57 Series
1.2 mm Pitch, Low Profile “Swing Lock”
Wire to Board Connector for Power Supply
2 pos.
3 pos.
♦Features
1. 1.2 mm pitch, 1.4 mm height, low profile connector
2. “Swing lock”; Both positive and friction locks are provided for cable pull
force resistance
3. High current capability; 2.5 Amps (2 pos. with AWG#28 cable)
4. Solder wicking prevention
5. High contact lance strength
6. 0.5 to 0.63 mm dia., AWG#30 to 28 cable is applicable
7. RoHS compliant
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
ITS-P-09010NW (Page 2 of 10)
1.2 mm Pitch, Low Profile Connector
Crimp Socket
♦2 pos.
Cable: AWG #30 to 28, φ 0.5 to 0.63 mm
Header
1.4 mm
Top View (2 pos.)
♦3 pos.
4.65 mm
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
Swing Lock
ITS-P-09010NW (Page 3 of 10)
“Swing Lock”
♦Hirose’s unique double lock design
Mating Operation
1. Insert the cable side first.
2. Press down at the lever side.
Friction lock
Positive lock
NOTE: Horizontal mating could damage the connector.
Clear tactile click!
Unmating Operation
3. Positive lock is released
and removal completes.
1. Hook the lever.
2. Pull up and friction lock is released.
Two locks, positive lock and friction lock are provided in this small connector.
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
Swing Lock
ITS-P-09010NW (Page 4 of 10)
Patent
Pending
Positive Lock Structure
Before mating
Mated
Cross section
Header
Header catching the lock on
socket endures Min. 5 N force
applied by cable pull up.
Socket
Accidental socket removal by cable pull is avoidable.
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
Swing Lock
ITS-P-09010NW (Page 5 of 10)
Friction Lock Structure
Before mating
Mated
Positive lock
-Sudden decline of load toward mating
direction generates clear click feeling,
preventing incomplete lock.
-Just inserting the positive lock does
not conduct electricity for safety.
-Friction lock prevents the socket from
floating after mated.
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
ITS-P-09010NW (Page 6 of 10)
DF57 Contact Features
♦Molded in contacts
♦Long effective mating length
prevents solder wicking
0.42 mm
No clearance between housing and
the contacts, avoiding solder wicking.
♦High current capability
Rated Current for 2 pos. with AWG#28 cable: 2.5 Amps
-Controlled contact force decreases contact
resistance, achieving high current capability
-Blade male contact is hard to deform
Male contact
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
ITS-P-09010NW (Page 7 of 10)
Lance Structure
Lance is provided to the socket bottom.
Patent
Pending
Crimp Socket
Crimp Contact
Header
Cavity of housing lance faces to
the header mated, preventing
dust intrusion to the contact.
♦Lance strength
Contact Lance
Housing Lance
Projected housing lance toward
the bottom is pushed up when
mated, increasing the hooked
area for additional lance strength.
Mated
Header
→ High lance strength prevents contact pulling loose during wiring.
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
ITS-P-09010NW (Page 8 of 10)
Recommended PCB Layout
♦2 pos.
♦3 pos.
No.2 Contact
No.3 Contact
No.1 Contact
No.1 Contact
No conductive trace.
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
ITS-P-09010NW (Page 9 of 10)
Application Example
Modules
Mobile Phone
Notebook PC
-LED module
-Touch panel
-Small sized battery
-Small sized motor
-Vibrator etc.
Industrial Robot
Digital Camera
LED Lighting
LCD TV
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
ITS-P-09010NW (Page 10 of 10)
Specifications
♦Material and Finish
COMPONENT
MATERIAL
FINISH / REMARKS
UL94V-0, Black
UL94V-0, White
Header
Housing
LCP
PBT
Socket
Header Contact
Brass
Tin-plated over Nickel under plating
Crimp Contact
Metal Fitting
Phosphor bronze
Brass
Tin-plated
Tin-plated over Nickel under plating
♦Performance Characteristics
2 pos. AWG#28: 2.5 Amps, AWG#30: 1.5 Amps
3 pos. AWG#28: 2.0 Amps, AWG#30: 1.5 Amps
50 V AC / DC
Rated Current
Rated Voltage
Operating Temperature
- 35 °C to + 85 °C
10 m Ω MAX. at 20 mV, 1 mA
100 M Ω MIN. (100 V DC)
Contact Resistance
Insulation Resistance
Withstanding Voltage
500 V AC for 1 minute
AWG#28 to 30, 0.5 to 0.63 mm
Applicable Cable
Durability
φ
30 cycles (Insertion / Withdrawal)
♦Varieties
2 and 3 pos. (4 pos. is under development. 5 and 6 pos. is under study.)
Specifications herein are subject to change without notice.
Contact Hirose for latest specifications, drawings, or availabilities.
Issued: Feb. 5, 2010
相关型号:
©2020 ICPDF网 联系我们和版权申明