LED25W-24-C1040-XX [ETC]

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing;
LED25W-24-C1040-XX
型号: LED25W-24-C1040-XX
厂家: ETC    ETC
描述:

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing

文件: 总4页 (文件大小:811K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
LED-25W Series– Fixed Output and Dimmable  
Switch Mode LED Drivers  
Constant Current & Constant Voltage with Isolation  
Black Magic Thermal Advantage™ Plastic Housing  
Electrical Specifications  
Input Voltage Range:  
Input Over-Voltage:  
Frequency:  
100-277 Vac Nom. (90-305 V Min/Max)  
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs  
50/60 Hz Nom. (47-63 Hz Min/Max)  
>0.90 @ full load, 100V through 277V  
<15.0 Amps max @ 230 Vac, cold start 25ºC  
0.25 Amps max @ 120 Vac  
25W  
Power Factor:  
Inrush Current:  
Input Current:  
Maximum Power:  
Current Accuracy:  
Load Regulation:  
THD:  
± 1% Over input line variation  
± 3%  
<_ 20% @ full load  
Leakage Current:  
Hold Up Time:  
Protection:  
400 µA Typical  
Total Power: 25 Watts  
Half Cycle  
• Input Voltage: 100-277 Vac Nom.  
• UL Dry & Damp Location Rated  
• High Power Factor  
Output Over-Voltage, Output Over-Current, and  
Output Short Circuit Protection with Auto Recovery  
• UL8750 and Class 2 Compliant, as noted  
• UL Sign Components Manual (S.A.M. Models)  
Environmental Specifications  
Minimum Starting Temp: -30ºC  
Constant Current  
Maximum Case Temp.  
Storage Temperature:  
Humidity:  
90°C  
Output Current Output Voltage Max. Output Typical  
Model Number  
(mA ±3%)  
Range (Vdc)  
24-72  
13-40  
10-28  
21-62  
19-56  
13-40  
13-40  
12-36  
10-28  
8-24  
Power (W) Efficiency  
-40ºC to +85ºC  
5% to 95%  
LED25W-72-C0350-XX  
LED25W-40-C0350-XX  
LED25W-28-C0350-XX  
LED25W-62-C0400-XX  
LED25W-56-C0450-XX  
LED25W-40-C0500-XX  
LED25W-40-C0620-XX  
LED25W-36-C0700-XX  
LED25W-28-C0850-XX  
LED25W-24-C1040-XX  
LED25W-20-C1250-XX  
LED25W-18-C1400-XX  
LED25W-16-C1560-XX  
LED25W-14-C1750-XX  
LED25W-12-C2080-XX  
350  
25  
14  
86%  
84%  
83%  
85%  
84%  
84%  
84%  
84%  
83%  
83%  
83%  
82%  
82%  
82%  
81%  
350  
Cooling:  
Convection  
5 to 55 Hz/2g, 30 minutes  
Class A  
350  
9.8  
24.8  
25  
Vibration Frequency:  
Sound Rating:  
MTBF:  
400  
450  
500  
20  
482,000 Hours at full load and 40ºC ambient conditions  
per MIL-217F Notice 2  
620  
24.8  
25  
EMC:  
FCC 47CFR Part 15 Class B compliant  
700  
850  
23.8  
25  
1040  
1250  
1400  
1560  
1750  
2080  
7-20  
25  
6-18  
25  
6-16  
25  
5-14  
24.5  
25  
4-12  
-XX indicates dimming options are available. See options at left. Blank = fixed current output  
Ordering Options:  
Constant Voltage  
Output Voltage Output Current Max. Output  
Typical  
Efficiency  
-D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on  
the output side. “-D” 0-10V Dimming is compatible with most quality 0-10V wall dimmers.  
See page 3 for additional specifications.  
Model Number  
(Vdc ±5%)  
Range (mA)  
520-2080  
438-1750  
390-1560  
360-1400  
313-1250  
Power (W)  
LED25W-12  
12  
14  
16  
18  
20  
25  
24.5  
25  
81%  
82%  
82%  
82%  
83%  
-PD: PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output side.  
“-PD” version is PWM Dimmable via a positive 10% to 100% Duty Cycle, 200Hz to 1KHz,  
0-10V Pulse. See page 4 for additional specifications.  
LED25W-14  
LED25W-16  
LED25W-18  
LED25W-20  
25  
25  
LED25W-24  
24  
28  
36  
260-1040  
213-850  
175-700  
25  
23.8  
25  
83%  
83%  
84%  
LED25W-28  
LED25W-36  
E332160  
LED25W-40  
LED25W-56  
LED25W-62  
LED25W-72  
40  
56  
62  
72  
155-620  
113-450  
100-400  
88-350  
24.8  
25  
84%  
84%  
85%  
86%  
24.8  
25  
Indicates S.A.M.  
Note:  
LED drivers are designed and intended to operate LED loads only.  
Non-LED loading may be outside the specified design limits of our  
LED drivers, and therefore cannot be covered by any warranty.  
If you desire to use our LED drivers to operate non-LED loads  
please contact us to discuss compatibility.  
Class 2:  
US/Canada  
US Only  
Specifications subject to change without notice.  
Rev 9-11-15  
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com  
LED25W Series  
SSL Solutions Faster Than The Speed Of Light®  
Pg 2 of 4  
Dimensions - IN [mm]  
Dimming  
Purple (+)  
Gray (-)  
Output  
Red (+)  
Blue (-)  
Tc = 90°C max  
Input  
White (N)  
Black (L)  
WIRE SPECS:  
Input Leads: 18 AWG, rated 600 V, 105C, min.  
Output Leads: 18 AWG, rated 300 V, 105C, min.  
Dimming Leads: 22 AWG, rated 300 V, 105C.  
All wires are stranded with solder dipped ends.  
Power Factor / Load  
THD / Load  
1.00  
0.90  
0.80  
0.70  
0.60  
0.50  
0.40  
0.30  
0.20  
0.10  
0.00  
20%  
18%  
16%  
14%  
12%  
10%  
8%  
120Vac  
277Vac  
120Vac  
277Vac  
6%  
4%  
2%  
0%  
50%  
50%  
60%  
70%  
80%  
90%  
100%  
60%  
70%  
80%  
90%  
100%  
Load  
Load  
Lifetime / Case Temperature  
Typical Efficiency / Load  
Safety and EMC Compliance  
130  
115  
90  
75  
60  
45  
30  
15  
0
100%  
UL/CUL  
C E  
UL8750, CSA-C22.2  
EN 61347  
120Vac  
277Vac  
95%  
90%  
85%  
80%  
75%  
70%  
FCC, 47CFR Part 15 Class B  
EN61000-3-2  
EN61000-3-3  
EN61000-4-5  
Class C  
2kV  
45  
50  
55  
60  
65  
70  
75  
80  
85  
90  
60%  
70%  
80%  
90%  
100%  
Case Hotspot Temperature (°C)  
Normalized Output Voltage  
Note:  
Life calculations are based on reliability with confidence using  
a 90% confidence level and <5% failure rate. At a confidence  
level of 90% it is expected that <5% of the parts will fail at  
the rated life provided. (Failure is defined as a driver drifting  
outside specification, rather than fail to operate)  
UL Conditions of Acceptability  
See website for additional information  
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com  
LED25W Series  
SSL Solutions Faster Than The Speed Of Light®  
Pg 3 of 4  
“-D” Option: 0-10VDC and Resistance Dimming  
Parameters  
Source Current out of 0-10V Purple Wire  
Absolute Voltage Range on 0-10V (+) Purple Wire  
Minimum  
0 mA  
Typical  
Maximum  
2 mA  
-2.0 V  
+15 V  
Typical Dimming Circuit  
Dim(+) Purple  
IP710 Wall Dimmer  
Dim(-) Gray  
LED25W-XX-CXXXX-D  
(Dimmer must be current-sink type control)  
Output Current / 0-10VDC Dimming Control Voltage  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
0V  
1V  
2V  
3V  
4V  
5V  
6V  
7V  
8V  
9V  
10V  
Purple-to-Gray Voltage (Vdc)  
Notes:  
1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.  
2. Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent  
3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V  
4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.  
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com  
LED25W Series  
SSL Solutions Faster Than The Speed Of Light®  
Pg 4 of 4  
“-PD” Option: PWM Dimming  
Parameters  
Minimum  
-2.0V  
-2.0  
Typical  
10V  
Maximum  
Absolute Maximum Voltage Range on PWM Input (Purple Wire)  
Input LOW Level Voltage Range (Purple Wire)  
Input HIGH Level Voltage Range (Purple Wire)  
Sink Current into PWM Input (Purple Wire)  
PWM Input Signal Frequency  
+28V  
+7.5V  
28V  
0V  
+9.0  
10V  
0mA  
—-  
1.2mA  
1000Hz  
100%  
200Hz  
0%  
—-  
PWM Input Signal Positive Duty Cycle  
10-90%  
PWM Positive Dimming Typical Circuit  
PWM (+) Purple  
LED25W-XX-CXXXX-PD  
PWM In  
PWM (-) Gray  
Output Current / Positive Duty Cycle  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
0%  
10%  
20%  
30%  
40%  
50%  
60%  
70%  
80%  
90% 100%  
Positive Duty Cycle  
Notes:  
1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.  
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.  
3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.  
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com  

相关型号:

LED25W-28

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-28-C0350-XX

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-28-C0850-XX

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-36

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-36-C0700-LE

Constant Current LED Drivers CCR Mode: ELV & Inc 100-10% Dimmable Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-36-C0700-TE

Constant Current LED Drivers CCR Mode: ELV & Inc 100-10% Dimmable Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-36-C0700-XX

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-40

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-40-C0350-XX

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-40-C0500-XX

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-40-C0620-XX

Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing
ETC

LED25W-48-C0520-LE

Constant Current LED Drivers CCR Mode: ELV & Inc 100-10% Dimmable Black Magic Thermal Advantage™ Plastic Housing
ETC