LED50W-042-C1190-XX [ETC]
Switch Mode LED Drivers;
| 型号： | LED50W-042-C1190-XX |
| 厂家： | 
ETC |
| 描述： | Switch Mode LED Drivers |
| 文件： | 总4页 (文件大小：827K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LED-50W Series– Fixed Output and Dimmable
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
Input Over-Voltage:
Frequency:
100-277 Vac Nom. (90-305 V Min/Max)
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ full load, 100V through 277V
<20.0 Amps max @ 230 Vac, cold start 25ºC
0.50 Amps max
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Current Accuracy:
Load Regulation:
THD:
50W
• Total Power: 50 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
± 1% Over input line variation
± 3%
<_ 20% @ Full Load
• High Power Factor
• UL8750
• UL Sign Components Manual (S.A.M. Models)
Leakage Current:
Hold Up Time:
Protection:
400 µA Typical
Half Cycle
Output Over-Voltage, Output Over-Current, and
Output Short Circuit Protection with Auto Recovery
Constant Current - Product Specifications
Output Current Output Voltage Max. Output
Typical
Model Number
(mA ±3%)
Range (Vdc)
47-142
37-111
24-72
24-72
20-60
16-48
14-42
13-40
12-36
9-29
Power (W)
49.7
49.9
38.1
50
Efficiency
89%
89%
88%
88%
88%
88%
87%
87%
87%
87%
87%
87%
86%
85%
84%
Environmental Specifications
Minimum Starting Temp: -30ºC
LED50W-142-C0350-XX
LED50W-111-C0450-XX
LED50W-072-C0530-XX
LED50W-072-C0700-XX
LED50W-060-C0830-XX
LED50W-048-C1050-XX
LED50W-042-C1190-XX
LED50W-040-C1250-XX
LED50W-036-C1400-XX
LED50W-029-C1750-XX
LED50W-024-C2100-XX
LED50W-020-C2500-XX
LED50W-018-C2800-XX
LED50W-015-C3330-XX
LED50W-012-C4200-XX
350
450
Maximum Case Temp.
90°C (3330mA and 15V, 88°C)
(4200mA and 12V, 78°C)
530
700
Storage Temperature:
Humidity:
-40ºC to +85ºC
5% to 95%
830
49.8
50
1050
1190
1250
1400
1750
2100
2500
2800
3330
4200
Cooling:
Convection
50
50
Vibration Frequency:
Sound Rating:
MTBF:
5 to 55 Hz/2g, 30 minutes
Class A
50
50
474,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
8-24
50
7-20
50
EMC:
FCC 47CFR Part 15 Class B compliant
6-18
50
5-15
49.9
50
4-12
-XXꢀindicatesꢀdimmingꢀoptionsꢀareꢀavailable.ꢀSeeꢀoptionsꢀatꢀleft.ꢀBlankꢀ=ꢀfixedꢀcurrentꢀoutput
Constant Voltage - Product Specifications
Output Voltage Output Current Max. Output
Typical
Efficiency
Model Number
(Vdc ±5%)
Range (mA)
1050-4200
833-3330
700-2800
625-2500
525-2100
438-1750
350-1400
313-1250
298-1190
263-1050
208-830
Power (W)
LED50W-012
12
50
84%
85%
•
Ordering Options:
LED50W-015
LED50W-018
LED50W-020
15
49.9
50
18
86%
-D:
0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on
the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers.
Seeꢀpageꢀ3ꢀforꢀadditionalꢀspecifications.
20
50
87%
ꢀ
LED50W-024
24
50
87%
•
-PD: PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output
side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle,
LED50W-029
LED50W-036
LED50W-040
LED50W-042
LED50W-048
LED50W-060
LED50W-072
LED50W-111
LED50W-142
29
50
87%
36
50
87%
ꢀ
200Hzꢀtoꢀ1KHz,ꢀ0-10VꢀPulse.ꢀSeeꢀpageꢀ4ꢀforꢀadditionalꢀspecifications.
40
50
87%
42
50
87%
48
50
88%
60
49.8
50
88%
E332160
72
175-700
88%
111
142
113-450
49.9
49.7
89%
88-350
89%
•
Indicates S.A.M.
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Class 2:
US/Canada
US Only
Specifications subject to change without notice.
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED50W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - IN [mm]
OUTPUT
Red (+)
Blue (-)
Tc = 90°C max
Dimming
Purple (+)
Gray (-)
INPUT
White (N)
Black (L)
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
Power Factor / Load
THD / Load
50%
45%
40%
35%
30%
25%
20%
15%
10%
0%
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
120Vac
277Vac
120Vac
277Vac
50%
60%
70%
80%
90%
100%
50%
60%
70%
80%
90%
100%
Load
Load
Typical Efficiency / Load
Lifetime / Case Temperature
100%
95%
90%
85%
80%
75%
70%
(Full Load @ 120Vac)
125
115
105
90
85
75
65
55
45
35
25
15
5
90Vac
120Vac
230Vac
277Vac
Typical
0
50
55
60
65
70
75
80
85
90
33%
45%
58%
60%
83%
92%
100%
Case Hotspot Temperature (°C)
Normalized Output Voltage
Note:
UL Conditions of Acceptability
See website for additional information
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED50W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
“-D” Option: 0-10VDC and Resistance Dimming
Parameters
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Minimum
0 mA
Typical
—-
Maximum
2 mA
-2.0 V
—-
+15 V
Typical Dimming Circuit
Dim (+) Purple
IP710 Wall Dimmer
Dim (-) Gray
LED50W-XX-CXXXX-D
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Control Voltage
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
Purple-to-Gray Voltage (Vdc)
Notes:
1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
2. Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent
3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V
4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED50W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
“-PD” Option: PWM Dimming
Parameters
Minimum
-2.0V
-2.0
Typical
10V
Maximum
+28V
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Sink Current into PWM Input (Purple Wire)
PWM Input Signal Frequency
0V
+7.5V
+9.0
10V
28V
0mA
—-
1.2mA
1000Hz
100%
200Hz
0%
—-
PWM Input Signal Positive Duty Cycle
10-90%
PWM Positive Dimming Typical Circuit
PWM (+) Purple
LED50W-XX-CXXXX-PD
PWM In
PWM (-) Gray
Output Current / Positive Duty Cycle
100
90
80
70
60
50
40
30
20
10
0
0%
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
Positive Duty Cycle
Notes:
1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.
3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
相关型号：
©2020 ICPDF网 联系我们和版权申明