LEG100W-143-C0700-D [ETC]

Switch Mode LED Drivers;


型号：	LEG100W-143-C0700-D
厂家：	ETC
描述：	Switch Mode LED Drivers
文件：	总3页 (文件大小：550K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

LEG-100W Series– Fixed Output and Dimmable

Switch Mode LED Drivers

Constant Current, Non-Isolated

Black Magic Thermal Advantage™ Metallic Housing

Electrical Speciﬁcations

Input Voltage Range:

Input Over-Voltage:

Frequency:

120-277 Vac Nom. (108-305 V Min/Max)

Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs

50/60 Hz Nom. (47-63 Hz Min/Max)

>0.90 @ full load, 100V through 277V

<_ 20% @ for all loads >80%

<40.0 Amps max @ 230 Vac, cold start 25ºC

0.9A@ 120Vac, 0.47A @ 230Vac

100W

Power Factor:

THD:

Inrush Current:

Input Current:

Maximum Power:

Current Accuracy:

Load Regulation:

Leakage Current:

Hold Up Time:

Protection:

± 1% Over input line variation

± 4%

• Total Power: 100 Watts

• Input Voltage: 100-277 Vac Nom.

• UL Dry & Damp Location Rated

• IP66

400 µA Typical

Half Cycle

Output Over-Voltage, Output Over-Current, and

Output Short Circuit Protection, reset by power cycling

• High Power Factor

• UL8750, EN61347, CSA 22.2

Environmental Speciﬁcations

Minimum Starting Temp: -30ºC

Maximum Case Temp.

Storage Temperature:

Humidity:

80°C

-40ºC to +85ºC

5% to 95%

Cooling:

Convection

5 to 55 Hz/2g, 30 minutes

Class A

Vibration Frequency:

Sound Rating:

MTBF:

Constant Current - Non Dimming

395,000 Hours at full load and 40ºC ambient conditions

per MIL-217F Notice 2

Output Voltage Output Current Max Output

Max

Efﬁciency

Model Number

Range (Vdc)

(mA ±3%)

350 mA

530 mA

700 mA

1050 mA

Power (W)

LEG100W-286-C0350

LEG100W-188-C0530

LEG100W-143-C0700

LEG100W-095-C1050

95-286

100

92%

91%

90%

89%

EMC:

FCC 47CFR Part 15 Class A compliant

63-188

100

Impact Resistance:

Weight:

1g/s

48-143

100

26 oz (738 grams)

32-95

100

Ordering Options:

Constant Current - 0-10VDC Dimming

-D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray

on the output side. 0-10V Dimming is compatible with most quality 0-10V dimmers.

See pg. 3 for more information.

Output Voltage Output Current Max Output

Max

Efﬁciency

Model Number

Range (Vdc)

(mA ±3%)

Power (W)

LEG100W-286-C0350-D

LEG100W-188-C0530-D

LEG100W-143-C0700-D

LEG100W-095-C1050-D

95-286

350

100

92%

91%

90%

89%

63-188

530

100

48-143

700

100

32-95

1050

100

E332160

Note:

LED drivers are designed and intended to operate LED loads only.

Non-LED loading may be outside the speciﬁed design limits of our

LED drivers, and therefore cannot be covered by any warranty.

If you desire to use our LED drivers to operate non-LED loads

please contact us to discuss compatibility.

Speciﬁcations subject to change without notice.

Rev 8-31-15

Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

LEG100W Series

SSL Solutions Faster Than The Speed Of Light^®

Pg 2 of 3

Dimensions - Inches (mm)

OUTPUT

Red (+)

Blue (-)

INPUT

Dimming

White (N)

Black (L)

Purple (-)

Gray (+)

Tc = 80°C max

WIRE SPECS:

CASE MUST BE GROUNDED IN END USE APPLICATION

AC Input / DC Output / Dimming Control:

• Solid Copper

• 8 IN [203mm]

• UL1316/1452 #18AWG

Lifetime/Case Temperature

(Full Load @ 120Vac)

400

350

300

250

200

150

100

Case Hotspot Temperature (°C)

Note:

Life calculations are based on reliability with conﬁdence using

a 90% conﬁdence level and <5% failure rate. At a conﬁdence

level of 90% it is expected that <5% of the parts will fail at

the rated life provided. (Failure is deﬁned as a driver drifting

outside speciﬁcation, rather than fail to operate)

UL Conditions of Acceptability

See website for additional information

Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

LEG100W Series

SSL Solutions Faster Than The Speed Of Light^®

Pg 3 of 3

“-D” Option: - 0-10VDC and Resistance Dimming

Parameters

Minimum

-2.0 V

Typical

Maximum

+15 V

Absolute Voltage Range on 0-10V (+) Purple Wire

Source Current into 0-10V Purple Wire

—

0 mA

2 mA

Typical Dimming Circuit

Dim (+) Purple

IP710 Wall Dimmer

Dim (-) Gray

LEG100W-XX-CXXXX-D

(Dimmer must be current-sink type control)

Output Current / 0-10VDC Dimming Input

100

10V

Dimming Input (Vdc)

Notes:

1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.

2. When connected to a dimming device, 0-10V dimmable version will have a ±10% output current tolerance.

This is due to variation between different 0-10V dimmers.

3. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent

4. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V

5. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.

Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

相关型号：