LZ1-30NW00-0040 [ETC]
LED EMITTER WHT 200LM MINI MCPCB;
| 型号： | LZ1-30NW00-0040 |
| 厂家： | 
ETC |
| 描述： | LED EMITTER WHT 200LM MINI MCPCB PC |
| 文件： | 总16页 (文件大小：894K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High Luminous Efficacy
Neutral White LED Emitter
LZ1-00NW00
Key Features
.
.
.
.
.
.
.
.
.
.
.
.
.
High Luminous Efficacy Neutral White LED
Ultra-small foot print – 4.4mm x 4.4mm
Single 4000K ANSI bin distribution
Surface mount ceramic package with integrated glass lens
Low Thermal Resistance (10°C/W)
High Luminous Flux density
Spatial color uniformity across radiation pattern
New industry standard for Lumen Maintenance
Autoclave complaint (JEDEC JESD22-A102-C)
JEDEC Level 1 for Moisture Sensitivity Level
Lead (Pb) free and RoHS compliant
Reflow solderable (up to 6 cycles)
Emitter available on Standard or Miniature MCPCB (optional)
Typical Applications
.
.
.
.
.
.
General lighting
Commercial Refrigeration
Office lighting
Retail & high-end interior lighting
Accent & Task lighting
Architectural Detail lighting
Description
The LZ1-00NW00 Neutral White LED emitter provides power in an extremely small package. With a 4.4mm x
4.4mm ultra-small footprint, this package provides exceptional luminous flux density. LED Engin’s patent-pending
thermally insulated phosphor layer provides a spatially uniform color across the radiation pattern and a consistent
CCT over time and temperature. The high quality materials used in the package are chosen to optimize light
output and minimize stresses which results in monumental reliability and lumen maintenance. The robust product
design thrives in outdoor applications with high ambient temperatures and high humidity.
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Part number options
Base part number
Part number
Description
LZ1-00NW00-xxxx
LZ1-10NW00-xxxx
LZ1-30NW00-xxxx
LZ1 emitter
LZ1 emitter on Standard Star MCPCB
LZ1 emitter on Miniature round MCPCB
Bin kit option codes
NW, Neutral White (4000K – 4500K)
Min
flux
Bin
Kit number
suffix
Chromaticity bins
Description
5B2, 5C2, 5B1, 5C1, 5A2, 5D2, 5A1, 5D1
5B2, 5C2, 5B1, 5C1, 5A2, 5D2, 5A1, 5D1
0040
P040
N
P
full distribution flux; 4000K ANSI CCT bin
P=minimum flux bin; 4000K ANSI CCT bin
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
2
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Neutral White Chromaticity Groups
0.44
0.42
0.40
0.38
5C2
5C1
5D2
5D1
5B2
5B1
5A2
5A1
Planckian Locus
0.36
0.34
0.32
4000K ANSI
C78.377A bin
0.34
0.36
0.38
CIEx
0.40
0.42
Standard Chromaticity Groups plotted on excerpt from the CIE 1931 (2°) x-y Chromaticity Diagram.
Coordinates are listed below in the table.
Neutral White Bin Coordinates
Bin code CIEx
0.3719
CIEy
Bin code CIEx
0.3847
CIEy
0.3797
0.3874
0.3958
0.3877
0.3797
0.3722
0.3797
0.3877
0.3798
0.3722
0.3649
0.3722
0.3798
0.3721
0.3649
0.3578
0.3649
0.3721
0.3646
0.3578
0.3877
0.3958
0.4044
0.3958
0.3877
0.3798
0.3877
0.3958
0.3875
0.3798
0.3721
0.3798
0.3875
0.3794
0.3721
0.3646
0.3721
0.3794
0.3716
0.3646
0.3736
0.3869
0.3847
0.3719
0.3702
0.3719
0.3847
0.3825
0.3702
0.3686
0.3702
0.3825
0.3804
0.3686
0.367
0.3869
0.4006
0.3978
0.3847
0.3825
0.3847
0.3978
0.395
5B2
5B1
5A2
5A1
5C2
5C1
5D2
5D1
0.3825
0.3804
0.3825
0.395
0.3924
0.3804
0.3783
0.3804
0.3924
0.3898
0.3783
0.3686
0.3804
0.3783
0.367
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
3
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Luminous Flux Bins
Table 1:
Minimum
Maximum
Typical
Luminous Flux (ΦV)
@ IF = 1200mA[2]
(lm)
Bin
Code
Luminous Flux (ΦV)
@ IF = 1000mA[1,2]
(lm)
Luminous Flux (ΦV)
@ IF = 1000mA[1,2]
(lm)
N
P
146
182
228
182
228
285
189
229
282
Q
Notes for Table 1:
1.
2.
Luminous flux performance guaranteed within published operating conditions. LED Engin maintains a tolerance of ± 10% on flux measurements.
Future products will have even higher levels of luminous flux performance. Contact LED Engin Sales for updated information.
Forward Voltage Bins
Table 2:
Minimum
Maximum
Forward Voltage (VF)
@ IF = 1000mA[1]
(V)
Forward Voltage (VF)
@ IF = 1000mA[1]
(V)
Bin Code
0
3.20
4.20
Notes for Table 2:
1.
LED Engin maintains a tolerance of ± 0.04V for forward voltage measurements.
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
4
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Absolute Maximum Ratings
Table 3:
Parameter
Symbol
Value
1200
1000
Unit
mA
mA
mA
V
°C
°C
°C
DC Forward Current at Tjmax=135°C[1]
DC Forward Current at Tjmax=150°C[1]
Peak Pulsed Forward Current[2]
Reverse Voltage
IF
IF
IFP
VR
Tstg
TJ
2000
See Note 3
-40 ~ +150
150
Storage Temperature
Junction Temperature
Soldering Temperature[4]
Allowable Reflow Cycles
Tsol
260
6
121°C at 2 ATM,
100% RH for 168 hours
Autoclave Conditions[5]
> 8,000 V HBM
Class 3B JESD22-A114-D
ESD Sensitivity[6]
Notes for Table 3:
1.
Maximum DC forward current is determined by the overall thermal resistance and ambient temperature.
Follow the curves in Figure 10 for current derating.
2:
3.
4.
5.
6.
Pulse forward current conditions: Pulse Width ≤ 10msec and Duty Cycle ≤ 10%.
LEDs are not designed to be reverse biased.
Solder conditions per JEDEC 020D. See Reflow Soldering Profile Figure 5.
Autoclave Conditions per JEDEC JESD22-A102-C.
LED Engin recommends taking reasonable precautions towards possible ESD damages and handling the LZ1-00NW00 in an electrostatic protected area (EPA).
An EPA may be adequately protected by ESD controls as outlined in ANSI/ESD S6.1.
Optical Characteristics @ TC = 25°C
Table 4:
Parameter
Symbol
Typical
Unit
Luminous Flux (@ IF = 1000mA)
Luminous Efficacy (@ IF = 350mA)
Correlated Color Temperature
Color Rendering Index (CRI)[1]
Viewing Angle[2]
ΦV
200
80
4000
82
85
125
lm
lm/W
K
CCT
Ra
2Θ1/2
Θ0.9V
Degrees
Degrees
Total Included Angle[3]
Notes for Table 4:
1.
2.
3.
Minimum Color Rendering Index (CRI) is 80.
Viewing Angle is the off axis angle from emitter centerline where the luminous intensity is ½ of the peak value.
Total Included Angle is the total angle that includes 90% of the total luminous flux.
Electrical Characteristics @ TC = 25°C
Table 5:
Parameter
Symbol
Typical
Unit
Forward Voltage (@ IF = 1000mA)
Forward Voltage (@ IF = 1200mA)
VF
VF
3.6
3.7
V
V
Temperature Coefficient
of Forward Voltage
ΔVF/ΔTJ
RΘJ-C
-2.8
mV/°C
°C/W
Thermal Resistance
(Junction to Case)
10.5
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
5
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
IPC/JEDEC Moisture Sensitivity Level
Table 6 - IPC/JEDEC J-STD-20D.1 MSL Classification:
Soak Requirements
Floor Life
Conditions
Standard
Conditions
Accelerated
Level
1
Time
Time (hrs)
Time (hrs)
Conditions
≤ 30°C/
168
+5/-0
85°C/
85% RH
Unlimited
n/a
n/a
85% RH
Notes for Table 6:
1.
The standard soak time includes a default value of 24 hours for semiconductor manufacturer’s exposure time (MET) between bake and bag and
includes the maximum time allowed out of the bag at the distributor’s facility.
Average Lumen Maintenance Projections
Lumen maintenance generally describes the ability of a lamp to retain its output over time. The useful lifetime for
solid state lighting devices (Power LEDs) is also defined as Lumen Maintenance, with the percentage of the original
light output remaining at a defined time period.
Based on long-term WHTOL testing, LED Engin projects that the LZ Series will deliver, on average, 70% Lumen
Maintenance at 65,000 hours of operation at a forward current of 1000 mA. This projection is based on constant
current operation with junction temperature maintained at or below 125°C.
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
6
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Mechanical Dimensions (mm)
Pin Out
Function
Pad
1
Cathode
Anode
2
3
Anode
4
5[2]
Cathode
Thermal
1
2
5
4
3
Figure 1: Package outline drawing.
Notes for Figure 1:
1.
2.
Unless otherwise noted, the tolerance = ± 0.20 mm.
Thermal contact, Pad 5, is electrically connected to the Anode, Pads 2 and 3. Do not electrically connect any electrical pads to the thermal contact, Pad 5.
LED Engin recommends mounting the LZ1-00NW00 to a MCPCB that provides insulation between all electrical pads and the thermal contact, Pad 5. LED Engin
offers LZ1-10NW00 and LZ1-30NW00 MCPCB options which provide both electrical and thermal contact insulation with low thermal resistance. Please refer
to Application Note MCPCB Options 1 and 3, or contact a LED Engin sales representative for more information.
Recommended Solder Pad Layout (mm)
Figure2: Recommended solder mask opening (hatched area) for anode, cathode, and thermal pad.
Note for Figure 2:
1.
Unless otherwise noted, the tolerance = ± 0.20 mm.
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
7
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Reflow Soldering Profile
Figure 3: Reflow soldering profile for lead free soldering.
Typical Radiation Pattern
100
90
80
70
60
50
40
30
20
10
0
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90
Angular Displacement (Degrees)
Figure 4: Typical representative spatial radiation pattern.
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
8
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Typical Relative Spectral Power Distribution
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
380 430 480 530 580 630 680 730 780 830 880
Wavelength (nm)
Figure 5: Relative spectral power vs. wavelength @ TC = 25°C.
Typical Relative Light Output
140
120
100
80
60
40
20
0
0
200
400
600
800
1000
1200
1400
1600
IF - Forward Current (mA)
Figure 6: Typical relative light output vs. forward current @ TC = 25°C.
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
9
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Typical Relative Light Output over Temperature
120
110
100
90
80
70
60
0
20
40
60
80
100
120
Case Temperature (°C)
Figure 7: Typical relative light output vs. case temperature.
Typical Forward Current Characteristics
1600
1400
1200
1000
800
600
400
200
0
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
VF - Forward Voltage (V)
Figure 8: Typical forward current vs. forward voltage @ TC = 25°C.
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
10
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Current De-rating
1600
1400
1200
1000
(Rated)
800
600
400
200
RΘJ-A = 9°C/W
RΘJ-A = 13°C/W
RΘJ-A = 17°C/W
0
0
25
50
75
100
125
150
Maximum Ambient Temperature (ºC)
Figure 9: Maximum forward current vs. ambient temperature based on TJ(MAX) = 150°C.
Notes for Figure 9:
1.
RΘJ-C [Junction to Case Thermal Resistance] for the LZ1-00NW00 is typically 10°C/W.
2.
RΘJ-A [Junction to Ambient Thermal Resistance] = RΘJ-C + RΘC-A [Case to Ambient Thermal Resistance].
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
11
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Emitter Tape and Reel Specifications (mm)
Figure 10: Emitter carrier tape specifications (mm).
Figure 11: Emitter reel specifications (mm).
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
12
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
LZ1 MCPCB Family
Emitter + MCPCB
Thermal Resistance
(oC/W)
Diameter
Typical Vf Typical If
Part number Type of MCPCB
(mm)
(V)
(mA)
LZ1-1xxxxx
LZ1-3xxxxx
1-channel Star
1-channel Mini
19.9
11.5
10.5 + 1.5 = 12.0
10.5 + 2.0 = 12.5
3.6
3.6
1000
1000
Mechanical Mounting of MCPCB
.
MCPCB bending should be avoided as it will cause mechanical stress on the emitter, which could lead to
substrate cracking and subsequently LED dies cracking.
.
To avoid MCPCB bending:
o
o
Special attention needs to be paid to the flatness of the heat sink surface and the torque on the screws.
Care must be taken when securing the board to the heat sink. This can be done by tightening three M3
screws (or #4-40) in steps and not all the way through at once. Using fewer than three screws will
increase the likelihood of board bending.
o
o
It is recommended to always use plastics washers in combinations with the three screws.
If non-taped holes are used with self-tapping screws, it is advised to back out the screws slightly after
tightening (with controlled torque) and then re-tighten the screws again.
Thermal interface material
.
.
.
To properly transfer heat from LED emitter to heat sink, a thermally conductive material is required when
mounting the MCPCB on to the heat sink.
There are several varieties of such material: thermal paste, thermal pads, phase change materials and thermal
epoxies. An example of such material is Electrolube EHTC.
It is critical to verify the material’s thermal resistance to be sufficient for the selected emitter and its operating
conditions.
Wire soldering
.
To ease soldering wire to MCPCB process, it is advised to preheat the MCPCB on a hot plate of 125-150oC.
Subsequently, apply the solder and additional heat from the solder iron will initiate a good solder reflow. It is
recommended to use a solder iron of more than 60W.
.
It is advised to use lead-free, no-clean solder. For example: SN-96.5 AG-3.0 CU 0.5 #58/275 from Kester (pn:
24-7068-7601)
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
13
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
LZ1-1xxxxx
1 channel, Standard Star MCPCB (1x1) Dimensions (mm)
Notes:
Unless otherwise noted, the tolerance = ± 0.2 mm.
Slots in MCPCB are for M3 or #4-40 mounting screws.
LED Engin recommends plastic washers to electrically insulate screws from solder pads and electrical traces.
LED Engin recommends using thermal interface material when attaching the MCPCB to a heat sink.
The thermal resistance of the MCPCB is: RΘC-B 1.5°C/W
Components used
MCPCB:
HT04503
(Bergquist)
(Diodes, Inc., for 1 LED die)
(Vishay Semiconductors, for 1 LED die)
ESD/TVS Diode: BZT52C5V1LP-7
VBUS05L1-DD1
Pad layout
MCPCB
Pad
Ch.
String/die Function
1,2,3
4,5,6
Cathode -
Anode +
1
1/A
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
14
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
LZ1-3xxxxx
1 channel, Mini Round MCPCB (1x1) Dimensions (mm)
Notes:
Unless otherwise noted, the tolerance = ± 0.20 mm.
LED Engin recommends using thermal interface material when attaching the MCPCB to a heat sink.
The thermal resistance of the MCPCB is: RΘC-B 2.0°C/W
Components used
MCPCB:
HT04503
(Bergquist)
(Diodes, Inc., for 1 LED die)
(Vishay Semiconductors, for 1 LED die)
ESD/TVS Diode: BZT52C5V1LP-7
VBUS05L1-DD1
Pad layout
MCPCB
Pad
Ch.
String/die Function
1
2
Anode +
Cathode -
1
1/A
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
15
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
Company Information
LED Engin, based in California’s Silicon Valley, develops, manufactures, and sells advanced LED emitters, optics and
light engines to create uncompromised lighting experiences for a wide range of entertainment, architectural,
general lighting and specialty applications. LuxiGen™ multi-die emitter and secondary lens combinations reliably
deliver industry-leading flux density, upwards of 5000 quality lumens to a target, in a wide spectrum of colors
including whites, tunable whites, multi-color and UV LEDs in a unique patented compact ceramic package. Our
LuxiTuneTM series of tunable white lighting modules leverage our LuxiGen emitters and lenses to deliver quality,
control, freedom and high density tunable white light solutions for a broad range of new recessed and
downlighting applications. The small size, yet remarkably powerful beam output and superior in-source color
mixing, allows for a previously unobtainable freedom of design wherever high-flux density, directional light is
required.
LED Engin is committed to providing products that conserve natural resources and reduce greenhouse emissions.
LED Engin reserves the right to make changes to improve performance without notice.
Please contact sales@ledengin.com or (408) 922-7200 for more information.
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00NW00 (2.4-02/06/15)
16
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com
相关型号：
©2020 ICPDF网 联系我们和版权申明