MI21A-50PDR-SFEJL31 [ETC]
Compact Flash Card Connectors; CF卡连接器
| 型号： | MI21A-50PDR-SFEJL31 |
| 厂家： | 
ETC |
| 描述： | Compact Flash Card Connectors |
| 文件： | 总16页 (文件大小：348K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
©
Complies with Compact Flash Association
Compact Flash Card Connectors
MI20/21 Series
(a)Space-saving design
ꢀFeatures
(b)Suitable for automatic mounting
Automatic equipment
pick up area.
1. Compact design occupies minimum space
Connectors are designed with small width and depth for
miniaturization and the foot print on the board has been
made smaller. (See (a) to the right)
2. Supplied with ground terminals
The MI21 Series are furnished with ground terminals.
3. Card ejection mechanism
Two point ejection mechanism to assure even card
ejection.
Fixed
4. Designed and packaged for board placement
with automatic equipment
Headers are designed with a pick up area to accommodate
the pick-and -place nozzles of automatic mounting
machines. (Patents pending)
HRS Product Feature
Fixed fittings make
slider immobile.
Receptacles are designed to be mounted on top the board,
and automatic mounting is possibble on the specified
board.
Construction facilitates
pick-and-place process.
5. Card ejection mechanism
ꢀProducut variation
Available in several termination and mouting styles, with
and without ejection mechanism, with and without stand-
offs.
Series Mounting
offset Ejector Cards Built-in nuts
None
None
Right
Left
Type1or2
----
6. Rich variations
Standard
MI20
2.2 mm
YES
A rich assortment of variations allows selection of a type to suit
the specific card and the equipment to which it will be installed.
(1)Suitable cards: Type I , type I/II .
Type1
None
Reverse 2.2 mm
Type1 Ø(None)
(2)Eject button: None, right , left
(3)Standoff: 0 mm, 2.2 mm
(4)Board mounting type: Standard , reverse
None
Standard
Right
Left
MI21
YES
Type1or2
None
2.2 mm
Reverse
None
None
Note 1: Hexagonal nuts (M2∞0.4) are required.
ꢀApplications
PDA, digital still cameras, etc.
C2
■■Product Specifications
Current rating 0.5 A
Operating temperature range
Storage temperature range
Storage humidity range
-55 to +85
ç
(Note 1)
-10 to +60ç
Rating
Voltage rating 125 V AC
Operating humidity range
Relative humidity 95% or less
(No condensation)
-40 to 70%
Item
Specification
Conditions
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
500 V DC
1,000 M ohms min.
500 V AC / 1 minute
1 mA
No flashover or insulation breakdown.
40 m ohms max. (initial value) (Note 3)
Frequency: 10 to 2000 Hz, full amplitude of 1.52 mm or
4. Vibration
No electrical discontinuity of 100ns or more
acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions.
96 hours at temperature of 40
ç
and humidity of 90% to 95%
5. Humidity (Steady state) Insulation resistance of 100 M ohms min.
Temperature: -55 for 30 min. --> +5 to 35
ç
ç
within 5 min.
6. Temperature cycle
Insulation resistance of 100 M ohms min.
85 for 30 min. --> +5 to 35 within 5 min. for 5 cycles
ç
ç
7. Durability
Change of contact resistance from initial value is
(Insertion/withdrawal) 20 m ohms max.
10000 cycles at 400 to 600 cycles per hour
8. Resistance to Soldering
heat
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: This does not include the resistance of the conductor .
■Materials
Item
Part
Material
PPS
Finish
Remarks
UL94V-0
Insulator
Color:Black
Receptacle
Contact Area : Gold plating
Contacts
Insulator
Contacts
Phosphor bronze
PPS
---------------
UL94V-0
---------------
Lead Area
: Solder plating
Color:Black
Contact Area
: Gold plating
Brass
Termination Area : Solder plating
Header
Metal fitting
Eject fitting
Ground clip
Nut
Brass
Stainless steel
Stainless steel
Steel
---------------
---------------
Applied to eject mechanism
---------------
---------------
Applied to MI21 series
---------------
Solder plating
■Ordering Information
■Receptacles
1
2
6
Series name: MI
Series No.
Board mounting type
Blank : Standard
: Reverse
MI 20 - 50 RD - SF
■
20: for type I cards ( )
21: for type I and II cards
Stand off type
R
1
2
3
4
5
7
8
Contact type
1
Series name: MI
Series No.: 20
3
SF: SMT
2
3
4
5
Blank : None
Eject button position
EJR : Right button
EJL : Left button
Blank : None
Number of contacts: 50
A
: 2.2 mm
Connector type RD: Receptacle
Contact form SF: SMT
4
5
Number of contacts: 50
Connector type
PD: Header
9
Built-in nut type
(31): With built-in nuts
Blank: Standard product
■Headers
MI 20 A - 50 PD R - SF - EJR (31)
1
2
3
4
5
6
7
8
9
( ) Can accommodate type II cards only when standard mounting is
■
used and stand off is 0 mm.
C3
■Receptacle
35.86
32.97
30.48
1.27
No.1
No.25
-2
No.26
No.50
2.7
0.2
(offset)
No.1
No.26
0.635
No.50
No.25
(t0.08∞w0.3)
1
31.115
0.05
Note 1 The coplanarity of the conductor is 0.1 mm Max.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI20-50RD-SF
640-7001-0
50
BPCB mounting pattern
(35)
+0.1
+0
33.4
31.115 0.05
2-R1max
0.635 0.03
50-0.4 0.03
(Recommended board thickness=0.4)
C4
■Headers for Type I or II Cards
49
48
■Eject button
■Offset
: None
: None
No.50
No.25
No.38
No.13
No.26
No.1
■Mounting style : Standard mounting
43.03
MI20--50PD
No.2
No.26
Polartiy mark
No.1
0.635
No.25
No.50
31.115
40.4
2.5
2.5
t : 0.25 ∞ w : 0.25
Note 1: Coplanarity of all surface mount terminals and components is 0.1.
Note 2: Dimensions in parentheses ( ) are reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI20-50PD-SF
640-7002-2
50
BPCB mounting pattern
51 0.1
45.5 0.05
44.6 0.1
37 0.05
2.9425 0.05
No.1
50-0.4 0.03
0.634 0.03
31.115 0.05
C5
48.3
46.3
■Headers for Type I Cards
■Eject button
■Offset
: None
No.25
No.13
No.38
No.1
: 2.2 mm
■Mounting style : Reverse mounting
No.50
No.26
43.03
(17.2)
No.2
0.635
No.1
No.25
No.50
No.26
31.115
42.3
33.7
(4.3)
(4.3)
t : 0.25∞w : 0.25
44
Note 1: Coplanarity of all surface mount terminals and components is 0.1.
Note 2: Dimensions in parentheses ( ) are reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI20A-50PDR-SF
640-7003-5
50
BPCB mounting pattern
44 0.05
43.9 0.1
50.3 0.1
41.3 0.05
37 0.05
2.9425 0.05
50-0.4 0.03
0.635 0.03
31.115 0.05
No.1
+0.1
0
Ø
(2- 2.4
)
illustrated in the figure are only required when screws are used for fastening.
1
Note
The holes
C6
■Headers for Type I Car
■Eject button
■Offset
: Right button
: 2.2 mm
■Mounting style : Standard mou
Note 1: The amount of card and button protrusion from the connector after mating is 13.6 mm.
Note 2: The dimensions of mating portion of this product comply with CFA standards.
Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.
This part is fixed in the initial condition, but released with a single operation of the ejector.
(Amount of actual card ejection: 3.5 mm)
3
Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.
Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI20A-50PD-SF-EJR
640-7004-8
50
BPCB mounting
+0.1
0
Ø
(2- 2.4
)
illustrated in the figure are only required when screws are used for fastening.
1
Note
The holes
C7
■Headers for Type I Car
■Eject button
■Offset
: Left side
: 2.2 mm
■Mounting style : Standard mou
Note 1: The amount of card and button protrusion from the connector after mating is 13.6 mm.
Note 2: The dimensions of mating portion of this product comply with CFA standards.
Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.
This part is fixed in the initial condition, but released with a single operation of the ejector.
(Amount of actual card ejection: 3.5 mm)
3
Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.
Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI20A-50PD-SF-EJL
640-7005-0
50
BPCB mounting pa
+0.1
0
Ø
(2- 2.4
)
illustrated in the figure are only required when screws are used for fastening.
1
Note
The holes
C8
■Headers for Type I or II
■Eject button
■Offset
: Right side
: 0 mm
■Mounting style : Standard mou
Note 1: This item is a (standard type) header for use with CompactFlash cards.
Note 2: The dimensions of mating portion of this product comply with CFA standards.
Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.
This part is fixed in the initial condition, but released with a single operation of the ejector.
(Amount of actual card ejection: 3.5 mm)
3
Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.
Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI21-50PD-SF-EJR
640-7107-0
50
BPCB mounting p
+0.1
0
Ø
(2- 2.4
)
illustrated in the figure are only required when screws are used for fastening.
1
Note
The holes
C9
■Headers for Type I or II
■Eject button
■Offset
: Left side
: None
■Mounting style : Standard mou
Note 1: This item is a (standard type) header for use with CompactFlash cards.
Note 2: The dimensions of mating portion of this product comply with CFA standards.
Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.
This part is fixed in the initial condition, but released with a single operation of the ejector.
(Amount of actual card ejection: 3.5 mm)
3
Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.
Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI21-50PD-SF-EJL
640-7108-3
50
BPCB mount
+0.1
0
Ø
(2- 2.4
)
illustrated in the figure are only required when screws are used for fastening.
1
Note
The holes
C10
■Headers for Type I or II Car
■Eject button
■Offset
: None
: None
■Mounting style : Standard mounting
Note 1: This item is a (standard type) header for use with CompactFlash cards.
Note 2: The dimensions of mating portion of this product comply with CFA standards.
Note 3: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced
fitting mounting end face is to be 0.1 maximum
Note 4: Dimensions in parentheses ( ) are to be regarded as reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI21-50PD-SF
640-7109-6
50
BPCB mount
+0.1
0
Ø
(2- 2.4
)
illustrated in the figure are only required when screws are used for fastening.
1
Note
The holes
C11
■Headers for Type I or II Cards
■Eject button
■Offset
: None
: None
■Mounting style : Reverse mounting
Note 1: Coplanarity of all surface mount terminals and components is 0.1.
Note 2: Dimensions in parentheses ( ) are reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI21A-50PDR-SF
640-7106-8
50
BPCB mounting pa
C12
■Headers for Type I and
■Eject button
■Offset
: Right side
: 2.2 mm
■Mounting style : Standard mou
Note 1: This item is a (standard type) header for use with CompactFlash cards.
Note 2: The dimensions of mating portion of this product comply with CFA standards.
Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.
This part is fixed in the initial condition, but released with a single operation of the ejector.
(Amount of actual card ejection: 3.5 mm)
3
Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.
Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI21A-50PD-SF-EJR
640-7101-4
50
BPCB mountin
+0.1
0
Ø
(2- 2.4
)
illustrated in the figure are only required when screws are used for fastening.
1
Note
The holes
C13
■Headers for Type I and
■Eject button
■Offset
: Left button
: 2.2 mm
■Mounting style : Standard mou
Note 1: This item is a (standard type) header for use with CompactFlash cards.
Note 2: The dimensions of mating portion of this product comply with CFA standards.
Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.
This part is fixed in the initial condition, but released with a single operation of the ejector.
(Amount of actual card ejection: 3.5 mm)
3
Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.
Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI21A-50PD-SF-EJL
640-7102-7
50
BPCB mounting pattern
+0.1
0
Ø
(2- 2.4
)
illustrated in the figure are only required when screws are used for fastening.
1
Note
The holes
C14
■Headers for Type I and II Cards
■Eject button
■Offset
: None
: 2.2 mm
■Mounting style : Standard mounting
Note 1: Coplanarity of all surface mount terminals and components is 0.1.
Note 2: Dimensions in parentheses ( ) are reference dimensions.
Part Number
CL No.
Number of Contacts
Packaging
Tray
MI21A-50PD-SF
640-7103-0
50
BPCB mounting
+0.1
0
Ø
(2- 2.4
)
illustrated in the figure are only required when screws are used for fastening.
1
Note
The holes
C15
BTemperature Profile
Applicable Conditions
:
:
Reflow system
Solde
IR reflow
Paste type 63 Sn/37 Pb
(Flux content 9 wt%)
Test board Glass epoxy 60mm x 60mm x 1.6 mm
Metal mask thickness: 0.15 mm
Recommended temperature profile.
The temperature may be slightly changed according to the
solder paste type and amount.
C16
BPrecautions for Use
1. Differentiate the side of the card at the time of CF card insertion. This product is furnished with an wrong insertion
prevention mechanism which is compliant with CFA standards, but forced wrong insertion of the card may cause
damage to the card.
2. Do not move the CF card up and down when it has been partially inserted. It may cause damage to the connector
and card.
Up
CF Card
Down
3. The package used for this product is the soft tray. We recommend a check before mounting, since the
adjustment may be reqaired depending on the type of mounter. For more detailed information, please
contact nearest Hirose account representative.
4. Recommended screw torque values.
[
]
Unit: N'm
Screw type
Steel screws
Brass screws
Standard torque
0.142
Upper tolerance limit
0.180
0.168
0.124
•
Screws : M2 X 0.4
BWashing Conditions
This product is a no-wash item, but in the case of washing, please observe the following conditions.
1. Organic Solvent Washing
Room temperature washing
Heated washing
Solvent
IPA (Isopropyl alcohol)
YES
YES
YES
YES
HCFC (Hydrochlorofluorocarbon)
2. Water Type Washing
When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent
based on the documentation issued by the various manufacturers of cleaning agents which describes the
effects on metals and resins.
Be careful that parts are not left with moisture remaining on them.
3. Washing Precautions
Residual flux or cleaning agent on the contacts when washing with organic solvents or water type
cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check
whether a thorough washing has been performed.
C17
相关型号：
©2020 ICPDF网 联系我们和版权申明