MT1110TR [ETC]
75Ω BROADBAND AMPLIFIER; 75з宽频带放大器![MT1110TR](http://pdffile.icpdf.com/pdf1/p00147/img/icpdf/MT111_812178_icpdf.jpg)
型号: | MT1110TR |
厂家: | ![]() |
描述: | 75Ω BROADBAND AMPLIFIER |
文件: | 总9页 (文件大小:294K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
M I C R O T U N E™
MT1110 75Ω BROADBAND AMPLIFIER
ADVANCE DATA SHEET
CATV DISTRIBUTION APPLICATIONS
1 APPLICATIONS
•
•
•
•
•
•
Set-top box
Home gateways
CATV Broadband distribution
Cable splitters
Laser drivers
Optical receivers
2 FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
Cascadable 75Ω gain block
15 dB Gain
3 dB Noise figure
Unconditionally stable
20 dB Input return loss
1 MHz to 2000 MHz 3 dB bandwidth
+0.5 dB Gain tilt from 50 MHz to 850 MHz
Typical OIP3 at 70 mA is 80 dBmV at 850 MHz
Single +5V supply
70 mA Current consumption
SOT-89 Package
Industry standard pin-out for drop in compatibility
3 OVERVIEW
The Microtune 1110 (MT1110) broadband amplifier is a 75Ω internally matched
amplifier designed for broadband CATV distribution and infrastructure applications.
The MT1110 is built using high performance silicon-germanium (SiGe) technology
and offers 15 dB gain with an industry best noise figure of 3.0 dB. It achieves a third
order intercept point of 80 dBmV while drawing the industry’s lowest current, 70 mA,
from a single 5V supply.
Specifically designed for cable, data, and video applications, the MT1110 features a
unique integrated equalization circuit that adds 0.5 dB of positive tilt to the gain
slope to compensate for a commonly occurring frequency dependent attenuation
found in broadband applications.
The MT1110’s Darlington circuit topology produces high linearity with very low noise
while maintaining matched input and output impedances. Two AC coupling
capacitors, a bias resistor, and an optional inductor are the only external
components required.
The MT1110 is available in a SOT-89 package for the extended industrial
temperature range of -40°C to +85°C.
DS-00019
Rev 1.1 -- September 2001
Page 1 of 9
MT1110 75Ω BROADBAND AMPLIFIER
ADVANCE DATA SHEET
CATV DISTRIBUTION APPLICATIONS
Rbias = 10 Ohms
VCC = 5V
1 uH
DC block
4
2
DC block
10 nF
10 nF
1
3
In
Zo
Zo
Out
VBias = 4.3 V
Figure 1
Typical Application
4 ABSOLUTE MAXIMUM RATINGS
Stresses greater than those listed in Table 1 may cause permanent damage to the
device. These are stress ratings only; functional operation of the device under
conditions other than those listed in the operational sections of this document is not
recommended or implied. Exposure to any of the absolute maximum rating
conditions for extended periods of time may affect reliability.
Table 1
Absolute Maximum Stress Ratings
PARAMETER
MIN
MAX
UNIT
Device voltage
-0.7
5
V
mA
dBmV
°C
Device current
100
RF Input power
60
Junction temperature
Storage temperature range
Lead temperature (soldering, 10 seconds)
+125
+150
+245
-55
°C
°C
5 DC ELECTRICAL CHARACTERISTICS
Table 2 Recommended Bias Resistor Values
SUPPLY VOLTAGE
RBias at 70 mA
5V
6V
9V
12V
110
UNIT
10
24
67
Ω
DS-00019
Rev 1.1 — September 2001
Page 2 of 9
MT1110 75Ω BROADBAND AMPLIFIER
ADVANCE DATA SHEET
CATV DISTRIBUTION APPLICATIONS
6 AC ELECTRICAL CHARACTERISTICS
The AC electrical characteristics listed in Table 3 are valid for the following
conditions unless otherwise noted. Typical parameters are at TA = +25°C.
•
•
Device current = 70 mA
Bias = 4.3 V
V
•
•
Zo = 75Ω
TA = -40°C to +85°C
Table 3
AC Electrical Characteristics
PARAMETER
Power gain
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNIT
S21
45 MHz to 870 MHz
15
dB
Lower frequency determined by external
components
3 dB Gain bandwidth
Noise figure
1
2000 MHz
NF
45 MHz to 870 MHz
3
3.5
dB
79 Channels, output = 25 dBmV per tone
112 Channels, output = 25 dBmV per tone
132 Channels, output = 25 dBmV per tone
79 Channels, output = 25 dBmV per tone
112 Channels, output = 25 dBmV per tone
132 Channels, output = 25 dBmV per tone
79 Channels, output = 25 dBmV per tone
112 Channels, output = 25 dBmV per tone
132 Channels, output = 25 dBmV per tone
79 Channels, output = 25 dBmV per tone
112 Channels, output = 25 dBmV per tone
132 Channels, output = 25 dBmV per tone
-72
-71
-70
-61
-58
-53
-54
-53
-52
-68
-65
-63
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
Composite triple beat
CTB
Composite second order
(sum)
CSO
CSO
Xmod
Composite second order
(difference)
Cross modulation
F1 = 54.25 MHz, F2 = 60.25 MHz,
Output = 55 dBmV per tone
83
82
80
dBmV
dBmV
dBmV
F1 = 403.25 MHz, F2 = 409.25 MHz,
Output = 55 dBmV per tone
Third order intercept point OIP3
F1 = 853.25 MHz, F2 = 859.25 MHz,
Output = 55 dBmV per tone
F = 403.25 MHz
F= 409.25 MHz
Second order intercept
OIP2
point
105
dBmV
dBmV
Output power 1 dB
P1dB
F = 859.25 MHz
66
compression point
Slope straight line
Flatness straight line
Flatness narrow band
Reverse isolation
SL
45 MHz to 870 MHz
45 MHz to 870 MHz
In each 6 MHz segment
50 MHz to 850 MHz
0.5
dB
dB
dB
dB
dB
dB
FL
-0.5
0.5
0.2
FLnb
S12
S11
S22
18
20
16
Input Return Loss
Output Return Loss
18
10
DS-00019
Rev 1.1 — September 2001
Page 3 of 9
MT1110 75Ω BROADBAND AMPLIFIER
ADVANCE DATA SHEET
CATV DISTRIBUTION APPLICATIONS
7 TYPICAL PERFORMANCE
The following data is representative of a part measured in a typical application
circuit.
•
•
Device Current = 70 mA
Bias = 4.3 V
V
•
•
Zo=75Ω
TA = 25°C
20
19
18
17
16
15
14
13
12
11
10
4
3.5
3
2.5
2
0
100
200
300
400
500
600
700
800
900
1000
0
100
200
300
400
500
600
700
800
900
1000
Frequency (MHz)
Frequency (MHz)
Figure 2
Power Gain vs Frequency
Figure 3
Noise Figure vs Frequency
0
-5
0
-5
-10
-15
-20
-25
-10
-15
-20
-25
S22
S11
-30
0
-30
0
100
200
300
400
500
600
700
800
900
1000
100
200
300
400
500
600
700
800
900
1000
Frequency (MHz)
Frequency (MHz)
Figure 4
Return Loss vs Frequency
Figure 5
Reverse Isolation vs Frequency
116
114
112
110
108
106
85
80
75
70
65
104
0
0
100
200
300
400
500
600
700
800
900
1000
100
200
300
400
500
600
700
800
900
Frequency (MHz)
Frequency (MHz)
Figure 6
OIP2 vs Frequency
Figure 7
OIP3 vs Frequency
DS-00019
Rev 1.1 — September 2001
Page 4 of 9
MT1110 75Ω BROADBAND AMPLIFIER
ADVANCE DATA SHEET
CATV DISTRIBUTION APPLICATIONS
-50
-50
-55
-60
-65
-70
-75
-80
131 Ch
Output = 25 dBmV / Tone
131 Ch
Output = 25 dBmV / Tone
112 Ch
112 Ch
79 Ch
79 Ch
-55
-60
-65
-70
-75
-80
5
105
205
305
405
505
605
705
805
905
5
105
205
305
405
505
605
705
805
905
Frequency (MHz)
Frequency (MHz)
Figure 8
CSO Sum vs Frequency
Figure 9
CSO Difference vs Frequency
-60
-62
-64
-66
-68
-70
-72
-74
-76
-78
-60
Output = 25dBmV / Tone
Output = 25 dBmV / Tone
131 Ch
112 Ch
79 Ch
131 Ch
112 Ch
79 Ch
-62
-64
-66
-68
-70
-72
-74
-76
-78
-80
-80
5
5
105
205
305
405
505
605
705
805
905
105
205
305
405
505
605
705
805
905
Frequency (MHz)
Frequency (MHz)
Figure 10 CTB vs Frequency
Figure 11 Xmod vs Frequency
100
90
80
70
60
50
40
30
20
3.2
3.4
3.6
3.8
4
4.2
Bias (V)
4.4
4.6
4.8
5
V
Figure 12 Collector Current vs V
Bias
DS-00019
Rev 1.1 — September 2001
Page 5 of 9
MT1110 75Ω BROADBAND AMPLIFIER
ADVANCE DATA SHEET
CATV DISTRIBUTION APPLICATIONS
8 TYPICAL S-PARAMETERS
Table 4
Typical S-Parameters (V
= 4.3V, Icc = 70 mA)
Bias
FREQ. MHZ
| S11|
S11 ANG
| S21|
S21 ANG
| S12|
S12 ANG
| S22|
S22 ANG
5
0.043
0.04
-2.627
-2.287
6.353
6.394
6.376
6.39
179.805
177.154
171.895
166.387
160.812
155.12
0.105
0.106
0.105
0.102
0.099
0.096
0.093
0.09
0.135
-1.797
0.128
0.134
0.142
0.154
0.172
0.19
1.843
50
-10.244
-31.946
-50.422
-64.061
-75.581
-84.236
-91.909
-97.833
-102.994
-109.497
-117.654
-123.275
-124.261
-125.368
150
250
350
450
550
650
750
850
1000
1250
1500
1750
2000
0.041
0.043
0.045
0.05
-7.052
-5.018
-11.811
-16.955
-20.835
-28.219
-33.505
-40.624
-45.991
-57.035
-69.338
-79.722
-103.07
-122.339
-7.894
6.365
6.344
6.285
6.249
6.117
6.044
5.777
5.373
4.981
5.104
5.14
-10.261
-12.163
-13.826
-14.899
-15.802
-16.532
-16.693
-16.663
-17.099
-8.827
0.056
0.065
0.076
0.087
0.11
149.584
143.488
137.725
132.207
123.596
110.022
97.893
0.211
0.228
0.249
0.265
0.293
0.332
0.363
0.35
0.087
0.084
0.081
0.077
0.074
0.066
0.057
0.15
0.193
0.34
87.096
0.483
76.932
0.078
0.338
9 TERMINAL CONNECTIONS
Terminal connections for the MT1110 are described in Table 5. The package
drawing on page 7 shows the pin configuration.
Table 5
PIN
Terminal Connections
FUNCTION/
SYMBOL
DESCRIPTION
1
2
3
4
IN
Input
GND
OUT
GND
Ground connection
Output/bias
Ground connection
DS-00019
Rev 1.1 — September 2001
Page 6 of 9
MT1110 75Ω BROADBAND AMPLIFIER
ADVANCE DATA SHEET
CATV DISTRIBUTION APPLICATIONS
10 PACKAGE DRAWING
Figure 13 MT1110 Package Drawing
DS-00019
Rev 1.1 — September 2001
Page 7 of 9
MT1110 75Ω BROADBAND AMPLIFIER
ADVANCE DATA SHEET
CATV DISTRIBUTION APPLICATIONS
11 ORDERING INFORMATION
This part is available in the configuration shown below. Contact one of the offices
listed on the following page or your local Microtune representative to place an order.
MT1110
TR
Product number
(branded on part)
Tape and reel,
3,000 units per reel
Figure 14 Ordering Information Scheme
DS-00019
Rev 1.1 — September 2001
Page 8 of 9
MT1110 75Ω BROADBAND AMPLIFIER
ADVANCE DATA SHEET
CATV DISTRIBUTION APPLICATIONS
NOTICES
NOTICE - The information in this document is believed to be accurate and reliable. Microtune assumes no
responsibility for any consequences arising from the use of this information, nor from any infringement of patents
or the rights of third parties, which may result from its use. No license is granted by implication or otherwise
under any patent or other rights of Microtune. The information in this publication replaces and supersedes all
information previously supplied, and is subject to change without notice. The customer is responsible for
assuring that proper design and operating safeguards are observed to minimize inherent and procedural
hazards. Microtune assumes no responsibility for applications assistance or customer product design.
NOTICE - The devices described in this document are not authorized for use in medical, life-support equipment,
or any other application involving a potential risk of severe property or environmental damage, personal injury, or
death without prior express written approval of Microtune. Any such use is understood to be entirely at the user’s
risk.
TRADEMARKS - Microtune, MicroTuner, and the Microtune logo are trademarks of Microtune, Inc. All other
trademarks belong to their respective companies.
PATENTS – Microtune’s products are protected by one or more of the following U.S. patents: 5,625,325;
5,648,744; 5,717,730; 5,737,035; 5,739,730; 5,805,988; 5,847,612; 6,100,761; 6,104,242; 6,144,402; 6,163,684;
6,169,569; 6,177,964; 6,218,899 and additional patents pending or filed.
COPYRIGHT - Entire contents Copyright © 2001 Microtune, Inc.
Telephone: 972-673-1600
Fax: 972-673-1602
World Headquarters
Microtune, Inc.
2201 Tenth Street
Plano, TX 75074
USA
Email: sales@microtune.com
Website: www.microtune.com
Telephone: +49-841-9378-011
Fax: +49-841-9378-010
European Headquarters
Microtune GmbH and Co. KG
Marie Curie Strasse 1
Sales Telephone: +49-841-9378-020
Sales Fax: +49-841-9378-024
85055 Ingolstadt / Germany
Telephone: +852-2378-8128
Fax: +852-2302-0756
Pan-Asian Headquarters
Microtune, Inc. - Hong Kong
Silvercord Tower 1, Room 503
30 Canton Road
Kowloon, Hong Kong
For a detailed list of current sales representatives, visit our Web site at www.microtune.com.
DS-00019
Rev 1.1 — September 2001
Page 9 of 9
相关型号:
©2020 ICPDF网 联系我们和版权申明