PA-SOD-2808-14 [ETC]

8-28 pin SO socket/28 pin SO receptacle (SO-Plugs NOT included);


型号：	PA-SOD-2808-14
厂家：	ETC
描述：	8-28 pin SO socket/28 pin SO receptacle (SO-Plugs NOT included)
文件：	总1页 (文件大小：24K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PA-SOD-2808-xx Data Sheet

8-28 pin SO socket/28 pin SO receptacle

(SO-Plugs NOT included)

Supported Device/Footprints

Using this adapter, various pin count SO packages with a body

width of 7.4mm - 7.9mm and lead pitch of 1.27mm can be

socketed over their PCB footprints.

Adapter Construction

The adapter is made up of 2 sub-assemblies. They assemble via

connectors making the adapter modular. This way the sub-

assemblies can be replaced when they wear out.

When disassembling the adapter take care not to bend the pins.

When reassembling the adapter note the pin 1 indicators to align

the parts correctly.

Device Dimensions

This socket accepts devices with the following dimensions:

The following chart lists the adapters described by this datasheet

and their subassemblies.

Adapter

Socket

Board

PA-SOD-2808-28

PA-SOD-2808-24

PA-SOD-2808-20

PA-SOD-2808-18

PA-SOD-2808-16

PA-SOD-2808-14

PA-SOD-2808-08

28SD-08

2808SOD

24(28H)SD-08

20(28H)SD-08

18(28H)SD-08

16(28H)SD-08

14(28H)SD-08

08(28H)SD-08

Body mm (inches)

Knee mm (inches)

min.

7.4

typ.

7.8

max.

7.9

min.

n/a

typ.

9.3

max.

9.4

Test Sockets

(0.291)

(0.307)

(0.311)

(0.366)

(0.370)

LSC #

28SD-08

Style

Lidded ZIF

Mfgr/Pn

Enplas FP-28-1.27.08

Tip mm (inches)

Body Length

n/a

Lead Pitch

1.27

(0.050)

xx(28H)SD-08 Lidded ZIF

Enplas FP-xx(28H)-1.27.08

min.

typ.

max.

n/a

10.0

11.6

Notes

(0.394)

(0.457)

1. The xx(28)SD-08 sockets are depopulated 28SD-08 sockets.

A “dam” is added to prevent incorrect alignment of the device.

Adapter Dimensions

2. The 28 pin test socket can be used for the reduced pin counts.

The test socket has divider fingers that keep the device leads on

their contacts. With modest care a reduced pin count device can

be correctly aligned in the test socket.

3. For all versions of the adapter, the board provides 28

positions to receive the SO-Plug. When using plugs with less

than 28 pins orient the plug and the device, away from the pin 1

end of the board.

Wiring

Wiring is 1 to 1. Pin 1 of the SO device is wired to pin 1 of the

plug. Pin 2 to pin 2 and so on around the adapter.

SO Plugs

SO Plugs are required to connect this adapter to the prototype.

They are available separately. The two most common plugs are

shown in the following chart. Other SO-Plugs will also mate with

this adapter, contact us if you want assistance matching plugs to

this adapter.

Plug Kit

PA-SOF-D420-xx

PA-SOF-D470-xx

0.260"

0.240"

0.420"

0.470"

Logical Systems Corporation

PA-SOD-2808-xx Data Sheet

Doc: SOD2808.DOC

Rev 09/28/01

PO Box 6184, Syracuse, NY 13217-6184 USA

Tel (315) 478-0722, FAX (315) 479-6753

www.logicalsys.com, Email: info@logicalsys.com

S Y S T E M S

Page 1 of 1