PA8027_技术文档

www.greenlee.com

COMMUNICATIONS

GREENLEE COMMUNICATIONS OFFERS A COMPLETE LINE OF

INNOVATIVE AND INDUSTRY-LEADING TEST & MEASUREMENT

SOLUTIONS FOR THE COMMUNICATION SERVICE PROVIDER INDUSTRY.

Contents

Multi-Network Test Analyzers

Wireless Test Solution

Cable Maintenance Test Set

Cable & Service Testing

Wire & Cable Identification

Structured Wiring Testers

Buried Facility Location And Marking

Fiber Optic Test Equipment

Fiber Optic Hand Tools

Fiber Optic Kits

280

281

282

286

293

305

310

315

337

339

340

352

382

Communications Kits

Hand Tools

HDMI Tools

COMMUNICATIONS

NETWORK TESTING

DataScout^™10G

CUSTOMIZABLE FOR ANY WORKGROUP

FASTER TIME TO RESULTS

• Ready to test in 25 seconds

• Unique DS0 (TIMS) to 10G Ethernet solution

• Test multiple services simultaneously

SIMPLE TO USE, FAST TO LEARN

• Touch screen tablet design

• Portrait and landscape modes

• Intuitive test conﬁguration

• Exportable results

RUGGED & RELIABLE

• Plug & stay - No modules to lose!

• Replaces up to 8 handhelds*

• Light yet sturdy aluminum housing

• Protective non-slip boot with kickstand

DS10G-HW-B2

DESIGNED FOR:

• Service Providers

• Utilities

• Mobility

SPECIFICATIONS

Display & Input

7” WVGA LCD touch screen

800x600 resolution

Weight (Varies by

configuration)

Dimensions

0.91 kg (2.0 lbs) minimum

1.36 kg (3.0 lbs) maximum

10 x 6.5 x 2.2 inches (WxHxD)

254 x 165 x 56 millimeters (WxHxD)

• Enterprise

Test Kits Include:

• DataScout 10G analyzer

• Universal charger with adapter blades

ENVIRONMENTAL

Operating Temperature

Operating Temperature: 10°C to 55°C14°F to

131°F

Operating Humidity:

Storage Temperature:

Battery Type:

0% to 93% RH non-condensing

-20°C to 70°C -4°F to 158°F

Li Ion battery pack

SOFTWARE OPTIONS

CAT. NO.

ETHERNET TEST OPTIONS

Run Time:

2-8 hours (varies by test mode)

Mains: 110-240VAC, 50-60Hz with adaptors

DESCRIPTION

Adds dual port 1Gb Ethernet testing

External Power:

Enclosure:

DS10G-SW-201

DS10G-SW-110

DS10G-SW-210

DS1 TEST OPTIONS

DST-SW-DT1

DST-SW-N1

Shell: Rugged 1.5mm extruded aluminum

Boot: Rubber with Wi-Fi^®antenna storage slot

Kickstand: Powder coated steel

Activates single 10G test interface

Adds dual port 10Gb Ethernet testing

CONFIGURATION OPTIONS

Adds dual port T1 testing

CAT. NO.

DESCRIPTION

Adds T1 CSU/NIU emulation

TABLET CONTROLLER

DST-SW-V

Adds DS0 voice analysis

Base Controller Without Datacom

Interface

DS10G-HW-B1

DST-SW-E

Adds Euro/Asian ISDN-PRI support

Adds DSO drop, insert & bypass

Adds DATACOM DTE/DCE interface testing

Adds E1/T1 On-The-Fly testing

DST-SW-X

DS10G-HW-B2

TEST INTERFACES

DS10-HW-WIFI

DS10-HW-ETH

DS10-HW-PDH1

DS10-HW-PDH2

DS10-HW-P

Base Controller With Datacom Interface

DST-SW-DCOM

DST-SW-E1

Wi-Fi^®

DS3 TEST OPTIONS

DST-SW-H3

Dual 10/100/1000T/X & 10G Ethernet

Dual DS1

Adds DS3 thru-mode testing

Adds DS1 drop from DS3 signal

Adds DS3 CSU/NIU emulation

DST-SW-D1D

DST-SW-NX

DS3 & Dual DS1

ISDN-PRI

TIMS TEST OPTIONS

DST-SW-PRO4

DST-SW-4

DS10-HW-DDS

Digital Data Services (DDS)

Adds 4-button frequency program

Adds 4-WIRE 100/135Ω testing

Transmission Impairment Measurement

System (TIMS)

DS10-HW-T

Adds E&M TYPE I-V signaling, trunk, PBX and

Tie Line testing

DST-SW-EM

Wi-Fi^®is a registered trademark of the Wi-Fi Alliance.

Adds measurement of dropouts, hits,

amplitude, and phase jitter

*As compared to competitive network analyzer model

Subject to change without notice.

DST-SW-DG

DST-SW-TON

Adds transmit of warble ID tone

TRUSTED

SINCE

1862

278

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

DataScout^™10G Product Specifications

PRODUCTIVITY APPLICATIONS

• Chrome web browser

• Google maps

• Email, notes & contacts

• PDF viewer

DS3 TESTING

• Automatic self test on connection

• STS-1 signal detection

4 WIRE DDS TESTING

• CSU/DSU emulation

• 56K primary/secondary modes

• 64K clear channel mode

• Real-time received byte display

• Monitor received signal level

• Simultaneously test Dual T1 and DS3

DS1 TESTING

• Dual T1/E1 testing

• Onboard user manual & videos

• Remote control/upload via LAN

• PRI-ISDN NT/TE emulation

• T1 to Ethernet Bridging

• DS0 Voice & Data Testing

• CSU/NIU Emulation Mode

• VT100 emulation

DATACOM TESTING

• Sync/Async & DTE/DCE modes

• V.35, RS232, RS449, RS530, X21

802.11 WIRELESS VALIDATION

• Tests for proper 802.11 b,g,n

conﬁguration

• Performs channel scan

• Graphical frequency/channel/power

display

INTELLIGENT TIMING VERIFICATION

• Veriﬁes network timing systems

• Combines oscilloscope, T1 test and

switch box

• Composite clock/pulse analysis

• Eliminates need for expensive

storage oscilloscope

• Frame Relay option

SIGNALING (TIMS/DS0) TESTING

• Comprehensive VF test suite

• TIMS 2/4 wire plus wideband

• CO/PBX emulation

• Perfect replacement for Am5,

CXR-704, HP4935A

• Remote control via Wi-Fi

ETHERNET VALIDATION

• Dual 10/100/1000T/X SFP

Ethernet ports

• 10 Gigabit Ethernet SFP+

• BERT

• Test 10 T1/E1 circuits in seconds

• Optical power measurement

• PING & Traceroute

• RFC-2544 with quick test validation

• Loopback, monitor and thru modes

• Easy to read graphical reports

www.greenlee.com

279

COMMUNICATIONS

NETWORK TESTING

MULTI-NETWORK TEST ANALYZERS

DataScout^™1G

FASTER TIME TO RESULTS

• Ready to test in 15 seconds

• Efficient SLA verification

• Results can be exported for easy sharing

REDUCE TIME TO REPAIR

• All-in-one analyzer that is simple to use and fast to learn, enabling technicians to

quickly determine and resolve network issues, regardless of the source

NO MODULES REQUIRED

• Eliminates the need for multiple test modules

• Combines seven different physical layer test protocols into one complete handheld

testing solution, saving time and money

DESIGNED FOR THE TECHNICIAN

• Ruggedized for demanding environments

• Ergonomically designed to be the lightest and smallest on the market

• Long battery run time provides extended field testing

Test Kits Include:

• DataScout 1G analyzer

• Universal charger with adapter blades

• Padded storage case

• Stylus

DS1G-BAS

• USB adapter

• Wi-Fi^®Antenna

SPECIFICATIONS

Interfaces

ENVIRONMENTAL

Operating Temperature 0°C to 50°C

Management: LAN 10/100 Base-T

USB: Mini-USB with adapter

Headset: Mini USB connector ear bud

Operating Humidity

Storage

5% to 90% non condensing

-10°C to 70°C

Wi-Fi

802.11 b/g/n

Battery

Type: Li Ion battery pack, 7.4V, 4800mAh

Display & Input

Weight

3.5" TFT Touch Screen LCD

Run Time: 7-10 hours typical (varies by test mode)

1.65 lbs (0.75 kg) without battery

2.2 lbs (1 kg) with battery

3.94 x 8.27 x 1.66 inches (WxHxD)

100 x 210 x 42 millimeters (WxHxD)

External Power

Enclosure

Mains: 110-240 VAC, 50-60 Hz

Ruggedized ABS with rubber shell

Dimensions

CONFIGURATION OPTIONS

SOFTWARE OPTIONS

CAT. NO.

DESCRIPTION

Ethernet Analyzer

CAT. NO.

DESCRIPTION

Adds single stream Ethernet tests to

DS1G-PDH1 or PDH2

DS1G-BAS

DS1G-PDH1

DS1G-PDH2

DS1G-SW-BAS

DS1 analyzer (T1 or E1)

Adds multiple stream Ethernet and

Y.1564 tests

DS1G-SW-ADV

DS1/DS3 analyzer (T3/T1 or E3/E1)

DS1G-SW-WIFI

DS1G-SW-VOIP

DS1G-SW-IPTV

DS1G-SW-E1

Adds Wi-Fi^®analysis

Adds VoIP analysis

Adds IPTV analysis

Adds E1 to T1 analyzer

Adds T1 to E1 analyzer

Adds DATACOM testing

Adds Co-Directional testing

Adds E3 testing to T3 analyzer

Adds T3 testing to E3 analyzer

IEEE C37.94 Teleprotection analysis

DS1G-SW-T1

DS1G-SW-DCOM

DS1G-SW-CODIR

DS1G-SW-E3

DS1G-SW-T3

DS1G-SW-C37

TRUSTED

SINCE

1862

280

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

WIRELESS TEST SOLUTION

AirScout^™

TM

› The innovative Wi-Fi test solution

› Enables whole home or small business

Wi-Fi^®readiness testing in minutes

ASM300

› Determines real “Quality of Experience” in

ASC300

multiple locations simultaneously

• Industry leading Application benchmark testing

• All 802.11 types benchmarked

• Validation testing over time increasing accuracy

• Determines, throughout the home in one survey:

• Signal strength

CAT. NO. DESCRIPTION

ASK302

ASK306

ASM300

ASC300

Two Client Solution in Carry Case

Six Client Solution in Carry Case

Individual Master Controller

Individual Client

• Network congestion

• Signal to noise ratio

• Real throughput rates

• Application performance in each location

• Up to 30 Clients supported

• Results recorded locally and in a cloud database for

future reference

SPECIFICATIONS

ASM Controller

Height

Width

Depth

Weight

Height

Width

Depth

Weight

Height

Width

Depth

Weight

1.81" (46.2 mm)

5.83" (147.6 mm)

5.79" (146.8 mm)

332 g (11.7 oz)

1.46" (36.83 mm)

4.88" (124.46 mm)

247 g (8.71 oz)

ASC Client

ASK306

14.6" (370 mm)

11.8" (300 mm)

6.69" (170 mm)

11.7 lbs (187.2 oz)

Operating Temperature 0 to +55 ºC / 0 to +131 ºF

Storage Temperature

Operating Humidity

Storage Humidity

FCC

-20 to +65 ºC / -4 to +149 ºF

20-80% RH non condensing

10-90% RH non condensing

Environment

Compliance

Canada Regulatory Requirements (ICES-003)

CE Compliance

Wi-Fi^®is a registered trademark of the Wi-Fi Alliance.

www.greenlee.com

281

COMMUNICATIONS

COPPER & DSL TESTING

CABLE MAINTENANCE TEST SET

Sidekick^®Plus Copper and DSL Test Set

• Saves time – Easy-to-use mode selection dial and operation - minimizes

training needs and saves time on the job

• Versatile – Combines your copper qualiﬁcation needs with DSL sync and

service testing in one test set

• Fully loaded – The Sidekick® Plus xDSL comes complete with all you need

to perform tests on the copper networks that support DSL services

• No modules needed – Advanced cable diagnosis and troubleshooting in a

single test set

Applications

Helps technicians diagnose and troubleshoot problems with twisted pair cable

Install, qualify, and maintain DSL services

1155-5005

Features

Bonded Modem With xDSL:

• Pair bonding

• ADSL2+/VDSL2+

• Vectoring

• Broadcom BCM63168

• Automated test scripts

• USB export/import of test results/proﬁles

• 35MHz Wideband Noise Spectrum Analysis

• 4.4MHz Loss Measurement Test

• 35MHz Impulse Noise Step

• TDR with auto bridgetap detection (zero dead zone)

ADSL/VDSL Modem Sync And Service Tests:

• DSL Showtime

• Bits per Tone Graph

• Signal-to-Noise Ratio Graph

• HLOG Graph

• Error Counter

• Upper Layer Testing: Ping, Trace-route, HTTP, FTP

Standard Features:

• Advanced Dual Trace Pulse TDR (Zero Dead Zone)

• Resistive Fault Locator (Detects up to 20MΩ)

• 1GΩ Leakage Test (Insulation Resistance)

• Longitudinal Balance Test

• Ground Resistance Test

• Stress Test

• AC/DC Voltage

• Resistance

• Open Meter

• Loop Current

• Circuit Loss

• Tracing Tone Generator

• Reference Tone

CAT. NO.

UPC NO. DESCRIPTION

1155-5001

1155-5003

1155-5005

1155-5009

1155-5010

1155-5011

1155-5012

1155-5013

01316

01324

01463

01317

01318

02275

04197

03838

Sidekick Plus Kit LCC

Sidekick Plus Kit SCC

Kit, Sk Plus, Impulse Noise, Step TDR

Sidekick Plus With Wideband

Sidekick Plus With Wideband & Adsl/Vdsl Sync LCC

Sidekick Plus With Wideband & Adsl/Vdsl Sync SCC

Sidekick Plus Pair Bonded Modem - Fully Featured

Sidekick Plus Pair Bonded Modem - Fully Featured SCC

TRUSTED

SINCE

1862

282

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Sidekick^®Plus ADSL Far-End-Device

For use with the Sidekick^®Plus as a complete ADSL testing solution

Applications:

• Helps technicians diagnose and troubleshoot problems with twisted pairs

at the far end of the cable

• Install, qualify, and maintain ADSL services

1155-5001

Benefits:

• Helps qualify pairs for ADSL service with ease

• Reduces testing time and increases technician productivity

Features:

• K-Test – Far-End-Device straps the pair under test

• TDR – Far-End-Device can alternately short and open the pair to

verify the end-of-line

• Noise – Far-End-Device provides a line termination

• Loss – Far-End-Device provides single or multiple reference tones

• Longitudinal Balance – Far-End-Device provides an IEEE 455-1985

Longitudinal Balanced Termination

• Autotest – The Sidekick Plus manages the operation of the Far-End-Device

during the test sequence

• Short Pair – Verifies loop length

• Short Pair to Ground – Determines pair resistive balance

• Remote activation via Sidekick^®Plus

• Ability to connect and disconnect Central Office and

Customer Premise equipment

• Supports Second Pair Testing

• Generates tones for pair ID and pair tracing

• Capability to generate tones over a range of frequencies from

POTS to ADSL

*For use with the Sidekick^®Plus Models

1155-5009 Sidekick^®Pluswith Wideband

1155-5010 Sidekick^®Pluswith Wideband & ADSL/VDSL Sync LCC

1155-5011 Sidekick^®Pluswith Wideband & ADSL/VDSL Sync SCC

1155-5012 Sidekick^®PlusBonded Modem - Fully Featured

1155-5013 Sidekick^®PlusBonded Modem - Fully Featured

Kit Includes:

• Sidekick® ADSL Far-End Device Unit

• RJ45 to Telco clip leads

• Canvas carry case

CAT. NO.

UPC NO.

DESCRIPTION

1157-5001

03958

Sidekick^®FED Kit

www.greenlee.com

283

COMMUNICATIONS

COPPER & DSL TESTING

Sidekick^®T&ND

• Easy-to-read digital LCD display

• Internal Dialer for making Transmission Test connections

• Autotest – performs 22 individual tests at the touch of a button

• Determines the stressed noise susceptibility of dry and working pairs

• Measures AC/DC Volts, Leakage, resistance, and loop current

• Performs circuit loss, circuit noise (metallic noise), and power influence tests

• Built-in open meter

1144-5000

• Locates up to 4 load coils

• Single set up for Tip-Ring, Tip-Ground, and Ring-Ground tests

• Field replaceable test leads

• On-screen display of “LOW BATTERY” when batteries are near failure.

SPECIFICATIONS

Weight

2 lbs.

Opens

0 to 60 kft.

Dimensions

AC Volts

DC Volts

Resistance

Leakage

Stress

10.75" X 4.25" X 2.5" Loop Current

0 to 100 mA

up to 4

+1 to -15 dB

40 to 100 dBrnC

0 to 75 dBrnC

Four AA Batteries

300 Vrms max.

300 Volts max.

1 Megohm max.

100 Megohm max.

0 to 82 dBrnC

Load Coil

Circuit Loss

Power Influence

Circuit Noise

Power

CAT. NO.

UPC NO. DESCRIPTION

1144-5000

1134-1002S

60853

60752

Sidekick T&ND Test Set

Case

Sidekick^®T&N

• Five transmission and noise tests

• Determines the stressed noise susceptibility of dry and working pairs

• Measures resistance, AC/DC volts, and capacitive kick

• Provides tone for twisted pair or crossed conductor identification

• Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground

• Minimal drying effect in all ranges

1137-5002

• Field replaceable leads

• Softcase with adjustable strand hook

• Low battery indicator light

SPECIFICATIONS

Dimensions

Weight

Resistance

10.75" x 4.25" x 2.5"

2 lbs.

Stress Test

0 to 82 dBrnC

0 to 100 mA

0 to 75 dBrnC

-15 to +1 dB

50 to 100 dBrnC

-4°F to +140°F

Four AA batteries

Loop Current

Circuit Noise

Circuit Loss

Power Influence

Operating Temp.

Power

Rx1: Reads 0 to 2000 Ω

Rx1K: Reads 0 to 2 MΩ

Rx10K: Reads 0 to 20 MΩ

0 to 300 volts DC

0 to 300 Vrms

Leakage

DC Voltage

AC Voltage

CAT. NO.

UPC NO.

DESCRIPTION

1137-5002

1131-0202

1134-1002S

60526

60751

60752

Sidekick T&N

Test Leads

Case

TRUSTED

SINCE

1862

284

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Sidekick^®7B

• Determines the stressed noise susceptibility of dry and working pairs

• Measures resistance, AC/DC volts, and capacitive kick

• Provides tone for twisted pair or crossed conductor identification

• Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground

• Minimal drying effect in all ranges

1134-5029

• Field replaceable leads

• Softcase with adjustable strand hook

• Low battery indicator light

SPECIFICATIONS

Dimensions

Weight

10.75" x 4.25" x 2.5"

2 lbs.

Resistance

Leakage

DC Voltage

AC Voltage

Stress Test

Rx1: Reads 0 to 2000 Ω; Rx1K: Reads 0 to 2 MΩ

Rx10K: Reads 0 to 20 MΩ

0 to 100 Volts DC

0 to 200 Vrms

0 to 82 dBrnC

CAT. NO.

UPC NO. DESCRIPTION

1134-5029

1134-1002S

1131-0202

60525

60752

60751

Sidekick 7B

Case

Test Leads

Sidekick^®V.O.C.

• Identifies defective inside wire and jacks

• Measures resistance, AC/DC volts, quasi square wave, and pair balance

• Identifies shorts, opens, crosses and grounds

• Replaces the need for other meters

• Provides tone for twisted pair or crossed conductor identification

• Single set-up for testing Tip-Ring, Tip-Ground, and Ring-Ground with

ground connection

• Field replaceable leads

• Softcase with adjustable hook

• Low battery indicator light

SPECIFICATIONS

Dimensions

Weight

10.75 x 4.25 x 2.5 inches

2 lbs.

Resistance

Rx1: Reads 0 to 2000 Ω

Rx1K: Reads 0 to 2 Megohms

Rx10K: Reads 0 to 20 Megohms

0 to 100 Volts DC

0 to 200 Vrms

0 to 82 dBrnC

Leakage

DC Voltage

AC Voltage

Stress Test

Operating Temp.

Power

1143-5000

-4°F to +140°F

Four AA batteries

CAT. NO.

UPC NO. DESCRIPTION

1143-5000

1134-1002S

60527

60752

Sidekick V.O.C.

Case

www.greenlee.com

285

COMMUNICATIONS

COPPER & DSL TESTING

CABLE & SERVICE TESTING

TM-700 Tele-Mate^™Telephone Test Set

• Complete telephone set with ringer

• Phone-to-phone intercom, compatible with other SmartIntercom™ devices

• Modular or alligator clip connection

• Amplified loudspeaker line monitor

• Headset or handset operation

• Tone and pulse dialing

• Large 10-location speed dialing memory

• Multi-memory redial

• DTMF digit detection and measurement

• Tone output mode

• Caller ID with name display

• Call waiting Caller ID

• Missed call indication

• DSL compatible, high impedance monitor and filters

• Glow-in-the-dark keypad

TM-700

• Line voltage and current display

• High voltage detect and lockout

• High current detect and lockout

• Uses 2 AA/LR6 batteries (included)

• Quick release belt-clip

A PRODUCT VIDEO IS

AVAILABLE, SCAN THIS QR

CODE OR VISIT:

www.youtube.com/GreenleeDEMO

CAT NO.

UPC NO. DESCRIPTION

00984

TM-700 Tele-Mate^™TELEPHONE TEST SET

QTY.

SPECIFICATIONS

TM-700

1

Technical Specifications

Length:

Width:

Height:

9.25" (235 mm)

2.5" (64 mm)

3.25" (83 mm)

TM-500 Tele-Mate^™Telephone Test Set

• Luminescent (glow-in-the-dark) keypad

• Can be used safely on a DSL enabled line

• High Impedance Monitor for monitoring line without disrupting

existing traffic

• Over voltage and over current protection

• Tone and Pulse dialing for versatility on old and new phone lines

• Polarity test with LED indicator

• 32 digit last number redial and pause

• 10 number speed dial

• Adjustable volume control plus mute

• Pause

• Flash to generate a timed break recall

• Line powered, no battery needed

• Headset (included) for hands free operation

• RJ11 socket

TM-500

• Quick release belt-clip

SPECIFICATIONS

CAT NO.

UPC NO. DESCRIPTION

QTY.

Technical Specifications

TM-500

00486

00494

00643

Telephone Test Set W/ ABN "Bed-Of-Nails" Croc Clips

(POP)

Telephone Test Set W/ ABN "Bed-Of-Nails" Croc Clips

(Boxed)

Telephone Test Set W/ Small Croc Clips (Boxed)

1

Length:

Width:

Height:

9.25" (235 mm)

2.5" (64 mm)

3.25" (83 mm)

TM-500T

TM-500i

1

TRUSTED

SINCE

1862

286

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Nautilus Range Telephone Test Sets

• Waterproof tested to an IEC IP67 rating, these test sets are so impervious to

water they can actually withstand submersion, though they actually float

• The PE961 features our DigAlert^™over-voltage alarm and lock-out

function to reduce the risk of damaging or knocking out digital service lines

• Built-in DSL Filter

• Ten-number speed dial memory (32 digits each)

• Last number redial

• Precise hook flash

• Microphone mute

• Audible and visual mode indicators

• Polarity test in any mode

• Unique quick-release belt clip

• Premium cord set with bed-of-nails and piercing pin clips

• Luminescent Keymat

PE961

CAT. NO. UPC NO. DESCRIPTION

PE930

PE945

PE961

PE901

PE902

60487

60489

60511

60492

60493

Telephone Test Set

Test Set with Two-Way Hands Free

Test Set with Two-Way Hands Free and DigAlert

Ground Start Cord Set

Cord Set

FEATURE

PE930

PE945

PE961

Monitor safe for data

Adjustable Ringer

Waterproof Design

Loud Speaker Listening

Two-Way Hands Free

DigAlert^™Data Lock-out

ADSL Compatible

✔

www.greenlee.com

287

COMMUNICATIONS

COPPER & DSL TESTING

ToneRanger

• Direct buried fault location, it gives an exact location to the fault.

• Locates open shield and open bond faults

• Locates twisted-pair resistance faults in aerial, underground, and direct

buried cable

• Locates splits, opens and bridge taps

• Uses low voltage and does not damage cable, circuit cards, C.O. or

subscriber equipment

• Sends Pair ID tone through wet pulp and saves service outage time on

small count section throws

• Locates open shields and shield to earth faults

• Does not interfere with DSL, IPTV or digital services on adjacent lines

• NEW easy user interface

CAT. NO.

UPC NO. DESCRIPTION

10101-50000

10101-51000

10101-51100

10101-51200

10101-51300

10101-51400

52042471

12734

20206

20202

12733

12732

52019

–

TF1A Kit, ToneRanger Aerial

TF1ABL Kit, ToneRanger Aerial and Buried

TF1AP Kit, ToneRanger Aerial with Pair ID

TF1AB Kit, ToneRanger Aerial with Buried Wand

TF1AL Kit, ToneRanger Aerial with Layup Stick

TF1ABLP Kit, ToneRanger with Aerial, Buried & Pair ID

Transmitter Test Cable

10101-50000

Throwmaster^®Paragon

• Used by construction cable splicers all around the world

• Transfer telephone/broadband services during normal working hours.

• Does not interrupt important customers

• Simple to follow interface and process for successful transfer of circuits

• LED's on the cords aid in telling the user in the cut, transfer and splice

• Compatible with T-1, HDSL, HDSL-2, HDSL-4, ADSL and other services

less than 10Mb/s

• Each step is automatically tested and verifies the circuit is complete at the

end of the transfer

CAT. NO.

UPC NO. DESCRIPTION

52901

Throwmaster^®Paragon 519 Kit

0529-0001

TRUSTED

SINCE

1862

288

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

1155 Fault Loop Simulator

• Simulates 8 faults that can be used individually, or in a combination:

– Cross battery

– Resistive 5 kohm load to ground

– Resistive 500 ohm short

– Two balanced bridge taps

– 60 ohm series resistance fault

– 60 Hz Power Influence

– High frequency noise

• 1910 foot cable length

• Battery operated

• Rugedized case

• Convenient Test Lead connections.

• Three access locations in the span for custOm faults

• Train users on real twisted-pair faults

• Test multiple test set functions such as RFL, TDR, Power Influence, Stress,

Leakage, Resistance, impulse noise and others

• Verify results from the field in a controlled environment

• Demonstrates how noise increases with pair imbalances

• Show differences between shorts, bridge taps, series faults and opens

with a TDR

1155-7001

CAT. NO.

UPC NO. DESCRIPTION

57691 Test Set

1155-7001

4-6-8 Modular Adapters

• Nylon-reinforced ABS plastic body.

• Easy-to-read wire layout.

• Removable/replaceable patch cord.

• Inline adapters.

• Snagless plugs.

• Belt clip.

• Notched copper contacts keep alligator clips attached during testing.

CAT. NO. DESCRIPTION

PA1902

PA1903

RJ45 Modular Adapter (8-way)

RJ11 Modular Adapter (6-way)

www.greenlee.com

289

COMMUNICATIONS

COPPER & DSL TESTING

TurTEL^®Modular Adapters/Polarity Tester

• Use with tone generators, test sets and other test devices to troubleshoot

and isolate problems with telephone circuits

• Two jacks allow in-line testing without service interruption

• The TurTEL 8 has two eight-position, eight-wire jacks

• Simple, push button operation to check polarity and power

• Reduced chance of shorting adjacent alligator clips due to unique shape

• Test contacts are perforated to provide sure grip for alligator clips or use

of probes

• Patch cord included

• Heavy-duty stainless steel belt clip

46050

CAT. NO. UPC NO. DESCRIPTION

46050

TurTEL 8 Modular Adapter

TelScout^®TS90

• Two Pair Test Capability

• One-Step Setup

• Automatic Instrument Control Mode

• 45,000' (15 km) Fault Location Capability

• Splash and Drip Proof

• Single-Button Zoom Function

• Pair Comparison Mode

• Splits/Crosstalk Mode

• Intermittent Fault Location

• Measures Distance to Fault in Feet, Meters, or Time

• Configurable for Any Cable Type and Vp (0.300 to 1.000)

• Accurate ( 3 ft. at 10,000 ft.)

• On-line Tutorials

TS90INTL

• Large Backlit Display

SPECIFICATIONS

Environmental Temperature –

Physical

Dimensions

Height

Width

in.

mm

141

211

43

Operating: 32° F to 77°F (0° C to +45° C).

Non-operating: 12° F to 92°F (-20° C to +60°

C).Humidity – 95% RH, non-condensing.

EMI Emissions –

5.6

8.3

1.8

Depth

EN55011 class A.

EN60555-2.

Weight

Net

.lb

2.2

kg.

1

Power

Battery Operation –

Battery Type: Six AA Alkaline.

Operating Time: >4.5 hrs. with backlight off.

Battery Saver:

CAT. NO.

UPC NO.

DESCRIPTION

Selectable for 5 to 30 minutes or disabled.

TS90INTL

012154500

THM5BAT

26345

Telescout, International TS90

Leads

60740

60756

Rechargeable Battery Pack

TRUSTED

SINCE

1862

290

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

CableScout^™TV220 - TDR Cable Tester for CATV

• Easier-to-use GUI interface requires little or no training

• PC application is compatible with all the current operating systems

• Improved clarity and trace functionality makes it even easier to identify faults

on-screen and determine noise versus the fault

• Even higher SNR and Resolution makes it easier to identify events that were

previously difficult or impossible to find

• Zero dead zone at the launch allows the user to see faults immediately

• Improved trace update rate allows you to see changes to the fault faster (5

times/sec. versus 2 times/sec.)

• Higher capacity to hold traces

• USB interface for trace download

• Lighter weight and longer charge life with the new lithium-ion battery

• TestWizard^™one-button testing

• Automatic Return Loss Measurements

TV220

• Automatic Multiple Event Marking

• High-Resolution, Short Pulse Width (1 ns)

• Rugged enough to withstand a 2 meter drop

CAT NO.

UPC NO.

DESCRIPTION

TV220

00676

17404

25877

21640

21641

TDR for CATV Broadband

Soft Carrying Case

TV220-0350

1155-1010

174173401

174326900

Power Supply, AC-DC

Vehicle DC Adapter/Charger

Replacement Power Cord

SPECIFICATIONS

Output

SPECIFICATIONS

Test Signal Output – 1/2 Sine

Power

Amplitude – 4V into 75 Ω

Pulse Width – 1 ns, 5 ns, 25 ns

Voltage Ranges: 110 V, 220 V, or 240 V with appropriate

AC to DC adapter

AC Operation –

Output Impedance – 75 Ω

Line Frequency: 50 Hz to 60 Hz

Acquisition System Bandwidth – 400 MHz

Automatic at cursor location

Resolution: 1 dB

Input Protection – 400 VDC + peak AC up to 440 Hz,

30-second duration

DC Operation –

Return Loss

Voltage Range: 9 to 16 VDC @ 1A (charging and operating)

Type: Internal Li-Ion rechargeable battery

Operating Time: Typically 12 hours continuous operation

(backlight off)

Battery Operation –

Maximum Distance Range – 12,000 ft. (3,658 m),

depending on cable type and condition

Gain – 0 to 72 dB

Battery Savers (user selectable) –

Shutoff: 5 to 30 minutes or disabled

Backlight: Shutoff 5 to 30 minutes, disabled, or always on

Waveform Storage – Minimum of 20 waveforms with notes

Feet:

0 to 2,000 ft.: 2 ft. uncertainty in Vp 2,001 to 6,000

ft.: 3 ft. uncertainty in Vp 6,001 to 12,000 ft.: 4 ft.

uncertainty in Vp Meters:

0 to 610 m: 0.6 m uncertainty in Vp

611 to 1830 m: 0.9 m uncertainty in Vp 1831 to 3658

m: 1.2 m uncertainty in Vp

Resolution: 640 x 440 (281,600 pixels)

Size: 7.2 inch

General Characteristics

Temperature –

Distance Accuracy

Operating: –10° C to +40° C (+11° F to +104° F) Non-

operating: –20° C to +60° C (–4° F to +140° F) Humidity

– 10% to 95% (non-condensing)

Field Usage – Shock, water, and dust resistant

Durability – Survives drop of 2 meters (6 ft.) to concrete in

standard soft case. Drip proof, dust resistant

EN55011, Class A

EMI Emissions –

Safety –

Display

EN60555-2

CE (Low Voltage Directive)

Type: High contrast LCD

Backlight: Operator switchable

PHYSICAL

Waveform Display Resolution – 0.33% of selected range,

4.5 cm (0.15 ft.) minimum

Display Ranges – Twelve display ranges from 6 ft.

(1.8 m) to 12,000 ft. (3,658 m), plus single-button

zoom window

Dimensions

Height

Width

Centimeters

24

Inches

9.5

30

11.5

9

3.5

Depth

Weight

Net

Kilograms

3

Pounds

6.4

Output Port – Serial 9-pin D type connector

Distance Measurements – Meters, feet, nanoseconds

www.greenlee.com

291

COMMUNICATIONS

COPPER & DSL TESTING

CableScout^™TV90

• High performance easy to use Time Domain Reflectometer for Coaxial

testing applications

• Employs optimized pulsing and sampling, coupled with advanced

filtering and signal-processing techniques to ensure clean waveform

and easy identification

• Context-sensitive help screens for all functions

• Small, portable and lightweight 2.2 lbs. (1kg)

• Includes rechargeable battery pack

• Includes twisted pair adapter and test probe

CAT. NO.

UPC NO. DESCRIPTION

TV90US

12600

60756

21729

21739

TV90 CableScout^™TDR

Rechargeable Battery Pack

AC Adapter 110V

THM5BAT

THM5AC

TS90-0350

TV90

Soft Carrying Case

SPECIFICATIONS

Temperature:

Operating: 32° F to 77°F (0° C to +45° C).

Non-Operating: 12° F to 92°F (-20° C to +60° C).

Durability: Survives Drop test of 6 foot (2m) to concrete in soft case

Power: 110 V, 220 V, 240 V with appropriate power adapter

Battery type: 6 AA Alkaline and NiCad rechargeable pack. 4.5 hours

continuous operation with adjustable battery saver modes

• Easy to operate (help screens available for all functions)

• Fast fault finding with automatic gain and vertical waveform positioning

• One-button Expand/Full View Function and zoom control.

• Precision accuracy 0-200 ft +- 2 ft. 1% beyond.

• Range up to 4000 ft.

• High-resolution with optimizing pulse and sampling and advanced filtering

• Input Protection: 200 VDC + Peak AC.

• Rugged - designed for harsh environments

Environmental

Standards

UL, FCC EMI, CAN/CSA, EN, and CE

• Large 7.2-in. high-resolution backlit display.

• International power supply options

TRUSTED

SINCE

1862

292

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

WIRE & CABLE IDENTIFICATION

Classic 77 Series Tone Generators

FEATURES / SPECIFICATIONS

77HP-G

77HP-G/6A

77M-G

Selectable Warble Tone

✔

Continuity Testing

Polarity Testing

Talk Battery Supply

Two-line Modular Test Lead (RJ-11)

Three-color LED (identifies AC ring voltage)

Weather-Resistant Design

Bent Nose Clips with Bed-of-Nails Penetrator

RJ11 & RJ45 socket

LED & Beeper

LED

✔

Lanyard

Battery Operated (9V not included)

✔

77M-G

77HP-G

77HP-G/6A

Classic 77 Series Tone Generators

Permits technicians to identify the conductor within a bundle, at a cross-

connect point or at the remote end. Can be used on twisted pair wiring

(telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC

wiring and most other wiring.

CAT. NO.

UPC NO.

DESCRIPTION

77HP-G

77HP-G/6A

77M-G

49991

49992

49993

77H-GP Tone Generator

77HP-G/6A Tone Generator (ABN clips)

77M-G Tone Generator (basic)

Note: Not for use on energized AC wiring

CAT. NO.

UPC NO.

DESCRIPTION

77CS

08686

Leather Belt Holster for Classic 77 Series

Tone Generators

77HP-G

77CS

Replacement Piercing Clips

• These traditional telco-style clips can be used with almost any style

cordsets.

• Clips feature bent nose design for use on 66 style punchdown blocks and

bed-of-nails penetrator for use on insulated wires.

• Package of two clips with red and black boots.

CAT. NO. UPC NO. DESCRIPTION

RPC

08710

Piercing Clips

RPC

www.greenlee.com

293

COMMUNICATIONS

COPPER & DSL TESTING

Station Master Pro

• Troubleshoot irrigation systems

• Activate and cycle solenoids

• Test solenoids for continuity

• Send tone to identify wires

• Measure clock voltage

• Low battery indication

• Easy-to-understand LEDs

• Test leads with Bed-of-Nails and piercing Pin Clips

• 1-year limited warranty

SPECIFICATIONS

Minimum Voltage for Clock LED

15 VAC

(LED intensity increases as voltage increases)

Minimum Battery while Testing

Maximum Input Voltage between Test Leads

Solenoid Circuit Recharge Time

10.5 VDC

28 VAC

2.5 seconds

24B

Maximum Distance Range to Activate one Solenoid 12 AWG Loop 3000-13000 feet

14 AWG Loop 2000-8500 feet

18 AWG Loop 500-3000 feet

Power Source

Battery Life

9V alkaline batteries

3 hours continuous

Operating/Storage Temp.

32°F - 122°F (0° - 50°C)

CAT. NO. UPC NO. DESCRIPTION

24B

86786

Station Master Pro

Station Master Pro Kit

• Troubleshoot irrigation systems

• Chatter mode for audible locating of valves

• Activate any 24V AC valve solenoid

• Test solenoids for continuity

• Send tone to identify wires

• Check clock AC voltage

• Low battery indication

• Easy-to-understand LEDs

• Test leads with 'bed-of-nails' and piercing pin plips

• Tracing valve wiring

• Locates underground solenoids

SPECIFICATIONS

Minimum voltage for clock LED

Minimum battery while testing

Maximum input voltage between test leads:

Solenoid activate output voltage:

Battery:

Operating/storage temperature:

Relative humidity (max):

15 V AC

10.5 V DC

28 V AC

27 to 18 V AC

2 - 9V Alkaline batteries

32°F to 122°F (0°C to 50°C)

80%

24BK

CAT. NO. UPC NO. DESCRIPTION

24BK

86787

Station Master Pro Kit

TRUSTED

SINCE

1862

294

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Professional GX Series Tone Generators

• Microprocessor controlled circuitry for increased reliability

• Two-line polarity indication for fast outlet identification

• Automatic shutoff to prevent battery drain

• Snag-proof boot prevents broken plug tabs

• Convenient wrist/hanging lanyard

• Three distinct, selectable tone signal outputs for multiple

line identification

• Two selectable tone power outputs for use on open and shorted pairs

• Independent continuity test function

• Independent talk battery supply with higher output voltage

• Fixed alligator clips and removable modular plug for multiple

connection options

77GX

• 77GX2 includes premium telco-style bent nose clips with piercing pin and

bed-of-nails connectors

CAT. NO. UPC NO. DESCRIPTION

77GX

77GX2

60556

60560

77GX Tone Generator

77GX2 Tone Generator

Note: Not for use on energized AC wiring

AdapToner Modular Breakout Tone Generator

• The AT8 Tone Generator makes it simple to test continuity, polarity,

send tone and even supply talk battery to any configuration of pairs in

8-position modular jacks and plugs

• Combines the features of our tone generators and a modular

breakout adapter

• In-line testing is made simple with both a modular plug and jack on

each unit

• 8-position “snag-proof” modular plug

• 8-position jack with protective cover

• Quick reference guide with common wiring configurations

• Selectable solid/warble tone signal

• Tone, continuity and talk battery supply using alligator clips

• Weather-resistant design

• Battery operated (9V not included)

AT8

CAT. NO. UPC NO. DESCRIPTION

AT8

08693

AdapToner Modular Breakout Tone Generator

Note: Not for use on energized AC wiring

www.greenlee.com

295

COMMUNICATIONS

COPPER & DSL TESTING

LAN Toner with HUB Blink and Detect

• The LAN Toner is designed for the network installation and maintenance

professional and can be used on any wiring system including datacom,

telecom, security/alarm, audio and CATV

• Blinks HUB, Switch Port, and PC activity lights for fast identification

• Detect LAN hubs & switches

• Provides tone signaling, continuity testing and telephone line polarity

indication combined with a modular breakout adapter

• Selectable tone outputs for identifying multiple cable runs

• Includes multiple connection options

CAT. NO. UPC NO. DESCRIPTION

AT8L

60583

LAN Toner

Note: Not for use on energized AC wiring

AT8L

Tone Test Set

• Our most comprehensive tone test set

• Traditional alternating tone signal for wire identification

• Audible line condition testing (level) indicates dead,

working and off-hook lines

• Line 1 and 2 polarity testing using 4-conductor modular plug

• Improved talk battery supply for communication over inactive pairs

• Tone and test functions using either modular plug or 24" alligator

clip leads

• Audible resistance level measurement

• Audible capacitance level measurement

• Battery operated (9V not included)

CAT. NO. UPC NO. DESCRIPTION

600LS

08680

Tone Test Set

Note: Not for use on energized AC wiring

600LS

TRUSTED

SINCE

1862

296

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Alarm Loop Verifier/Tone Generator

• Designed specifically for the security and alarm industry, the PE620 can

be connected to a normally open or normally closed loop pair

and provides a distinct audible tone when the alarm condition occurs

• Latching feature provides a simple method for identifying intermittent

failures (“swingers”) and confirming operation of switches at

remote locations

• In the latching mode, the unit will catch the alarm condition

and continue sounding until the tester is reset

• As a tone generator, the unit provides a traditional variable tone that

can be applied using the 24" red and black test leads or a convenient

6-position modular plug

• Convenient magnetic back plate allows the PE620 to be mounted directly

to the control panel cabinet or door

• Battery operated (9V not included)

CAT. NO. UPC NO. DESCRIPTION

PE620

08665

Alarm Loop Verifier/Tone Generator

Note: Not for use on energized AC wiring

PE620

Data Mate^™Precision Tracing Tone Generator

• Trace wire or cable without interfering with digital two-way cable

or ADSL services

• The model 7780 Data Mate™ Precision Tone Generator is intended to

provide tone for tracing and troubleshooting communication circuits

without disrupting digital traffic on the line or adjacent lines

• The high purity of the tracing tones combined with internal isolating filters

allows safe tracing on circuits that carry digital services above the

baseband (two-way cable and ADSL)

• The high-power differential output of the 7780 makes tones easy to find,

even over long distances. Also useful for continuity testing and polarity

testing, the 7780 provides the standard warble tone and talk

battery supply

• High Power Tone Output.

• Line Voltage and Polarity

Indication.

• Two-way Broadband Compatible.

• Modular and Telco Pro Alligator

Leads.

• High Purity Tone Signal.

• Low Crosstalk.

• ADSL Service Compatible.

• Long Range.

• Low Battery Indicator.

• Filter-isolated Circuitry.

• Popular, Standard Warble Tone

Frequencies Continuity Testing

• Compatible with existing tone.

SPECIFICATIONS

Electrical

PE7780

Output Power

+9dBm

Output Signal Frequency

Output Impedence

Mechanical

577/982 Hz alternating

3,500 ohms minimum, 25kHz to 1.1 MHz

Length 5.5" (140 mm)

Width 2.25" (57 mm)

Depth 1.0" (25 mm)

Weight 0.38 lbs. (0.17 kg)

CAT. NO. UPC NO. DESCRIPTION

PE7780 60777 Data Mate™Tone Generator

Note: Not for use on energized AC wiring

www.greenlee.com

297

COMMUNICATIONS

COPPER & DSL TESTING

Tone Probes Selection Guide

MODEL NO.

200B-G

200EP-G

200GX

200FP

200XP

500XP

Powerful 2" Rear-fire Speaker

One-button Operation

✔

Two-Button

Adjustable Volume Control

LED for Visual Signal Strength Indication

Recessed Tabs for Telephone Test or Headset Connection

Headset Jack (audio shock protected)

LED Flashlight

✔

Noise Filtration

Replaceable Tip

Five-Minute Auto Shutoff

Low-battery Indicator

Battery Operated (9V not included)

Water Resistant

"Mains Power" Warning (acAlert^®option)

Patented

✔

200B-G

200GX

200FP

200XP

500XP

Tough & Water Resistant Multi-Filter Tone²⁰P^0EPr^-Gobe

• Water resistant (floats) and tough, combined with all the very best digital

signal processing filtering 500XP will help identify signals buried in the

worst of noise

• Simple two-button operation with dual signal strength indicating LEDs

can work with any tone generator

• Headset allows discrete use in quiet environments and can help in

acoustiacally noisy areas

500XP

• Option to enable acAlert^®, which helps warn users if brought near

hazardous ac power voltages which may be inaudible if using the

advanced filtering

CAT. NO. UPC NO. DESCRIPTION

500XP

01125

01085

01126

02642

500XP Pair Tracing Probe (POS)

500XP Pair Tracing Probe (Boxed)

Replacement Headset

500XPB

HS001

500XPH

500XP Pair Tracing Probe Holster

Tone Probe Amplifiers

• Used in conjunction with any tone generator, Tone Probe Amplifiers permit

wire and cable identification without having to make direct metallic contact

with the conductor

• All models feature a powerful speaker for noisy environments,

recessed on/off button control and high gain for accurate wire identification in

congested cable bundles and equipment rooms

• The 200B-G also includes adjustable volume control for precise identification

• The 200GX also includes an LED for visual signal strength indication and

recessed telephone test set connectors

• The 200EP-G also includes a headset jack (audio shock protected) and an

LED Flashlight for working safely behind furniture, inside racks or in dim

lighting conditions

200C

CAT. NO. UPC NO. DESCRIPTION

200EP-G

200B-G

200GX

49986

60557

Tone Probe, Basic

Tone Probe, Standard

200EP-G

200C

49987

08670

Tone Probe, Standard, with Headset Jack & Flashlight

Leather Belt Holster for 200 Series Tone Probe Amplifiers

TRUSTED

SINCE

1862

298

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Filter Tone Probe

• By selectively filtering out 60Hz (or 50Hz) and its harmonics, the 200FP

can be used with any tone generator for faster, more accurate,

cable and wire identification

• Slim, comfortable design for use in limited-space areas

• Recessed on/off push-button control to conserve battery life

• Adjustable sensitivity/volume control to increase accuracy

• Blended carbon/plastic tip to reduce the risk of shorting terminals

• Patented

CAT. NO.

UPC NO. DESCRIPTION

200FP

200FP/50

08672

60467

Filter Tone Probe (60Hz mains)

Filter Tone Probe (50Hz mains)

200FP

Multi-Filter Tone Probe

• Single button selects between default mode and two kinds of

powerful noise filters

• Filtering means faster, more accurate pair tracing

• Digital signal processor for accuracy and sensitivity

• Durable, light weight

• Audible and visible signal detection

• Continuous, wide-range volume control

• Butt set terminals

• Field replaceable tip, spare tip included

• Uses a single 9V battery

• One probe for many applications

• Works with any tone generator

• The narrowband filter mode is especially well suited for 577Hz Telco tone

sources and a version is available for 1kHz systems (983Hz)

200XP

CAT. NO.

UPC NO. DESCRIPTION

200XP

200XP/50

60887

60888

Multi-Filter Tone Probe (60Hz mains, 577Hz narrowband)

Multi-Filter Tone Probe (50Hz mains, 983Hz narrowband)

Replacement Plastic Tips for 200 Series Probes

• Plastic tips perform much the same as traditional metal tips while

reducing the risk of shorting terminals

• Specially formulated with a carbon powder and carbon fiber

blended plastic

• Tips fit 200B, 200EP, 200GX, 200FP and 200XP probes

• RPT-1 comes with two pencil-style tips and two spade-style tips

CAT. NO. UPC NO. DESCRIPTION

RPT-2

RPT-1

RPT-2

08711

60561

Plastic Tips for 200B, 200EP, 200FP and 200XP

Plastic Tips for 200GX

RPT-1

Replacement Metal Tips for 200B and 200EP Probes

• Metal tips provide maximum performance when probing insulated wires

or making direct metallic contact

• Made of nickel-plated brass

RMT-1

• Tips fit 200B and 200EP probes

• Package contains two pencil-style tips

CAT. NO. UPC NO. DESCRIPTION

RMT-1

08709

Metal Tips for 200B and 200EP Probes

www.greenlee.com

299

COMMUNICATIONS

COPPER & DSL TESTING

Precision Tone Generator

• Used in the telecommunications industry for pair identification

and fault locating

• Supplies a precise 577.5Hz crystal controlled signal frequency.

• Variable output allows technicians to adjust signal strength to suit field

conditions and improve accuracy

• Designed to work with any common amplifier and exploring coil for

aerial fault locating

• For communications over inactive pairs, the unit supplies talk battery to

power two telephone test sets (buttsets)

• Each of the three test leads is equipped with traditional bent nose piercing

clips with “bed-of-nails” insulation piercing pins

• The tone generator and test leads fit neatly in a durable, protective woven

polyester carrying case with shoulder strap

177

• Battery-operated (1 – 6V lantern included)

CAT. NO. UPC NO. DESCRIPTION

177

08657

Precision Tone Generator

SPECIFICATIONS

Power Requirements

Battery Life

One 6V lantern battery

40 hours nominal

Transmitter Frequency 577.5Hz pulsed at 1Hz, crystal controlled

Output Voltage

Output Signal Level

Construction

Dimensions

0.1 to 80Vp-p

0 to +30dBm

High impact ABS plastic in woven polyester case

7.25" x 5.5" x 4.5" in case

3 lbs. with battery

Weight

T-Bug^®Digital Signal Identifier

• Used to detect digital signals on twisted pair cables, identify and isolate digital

pairs for special handling and help technicians avoid accidentally putting pairs

out of service

• Operation is non-invasive and does not involve metallic contact so there’s

no risk of service interruption

• Simple to use – just place the probe between the pairs in question

• Differential amplifier saves time by allowing the technician to determine

whether the signal is truly present or is an induced signal from adjacent pair

• False readings due to noise are virtually eliminated

• Continuous self test ensures that the unit is functioning properly

• Emits both visible and audible indication when digital signals are present

• Patented

0134-0500

CAT. NO.

UPC NO. DESCRIPTION

60764

T-Bug^®Digital Signal Identifier

0134-0500

TRUSTED

SINCE

1862

300

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Classic Tone and Probe Kits

• 701K-G Kits include the 77HP-G High Power Tone Generator and the 200EP

Tone Probe Amplifier in a rugged, woven nylon carrying case (700C)

• 601K-G Kit is a more basic version of the 701K-G kit, and includes the

77M-G Tone Generator and the 200B-G Tone Probe amplifier in a zippered

nylon pouch

CAT. NO.

UPC NO. DESCRIPTION

601K-G

701K-G

701K-G/6A

49989

49990

35775

Classic Tone and Probe Kit, Basic

Classic Tone and Probe Kit, Standard

Classic Tone and Probe Kit, Standard with ABN clips

701K-G

Premium Tone and Probe Kit

• Designed for more accurate wire identification, the 801K virtually

eliminates power-related noise from the tone and probe operation

• Kit includes the 77HP/6A High Power Tone Generator and 200 FP Filter

Probe in a convenient Cordura^®case (700C).

801K

CAT. NO. UPC NO. DESCRIPTION

801K

801K/50

08690

60466

Premium Tone and Probe Kit

Premium Tone and Probe Kit (50Hz)

Xpert Tone and Probe Kit

• The Xpert Tone and Pobe Kit includes the 77GX (or 77GX2) Tone Generator

and 200XP Multi-Filter Tone Probe Amplifier in a rugged, woven nylon

carrying case

• Especially suited for tracing in noisy environments

CAT. NO.

UPC NO. DESCRIPTION

811K

811K/6A-BOX

36001

26375

Tone and Probe Kit, Xpert

Tone and Probe Kit, Xpert with ABN clips

811K

AdapToner Kit

• Designed for fast, accurate wire identification by combining the features

of our tone generators and modular breakout adapter

• Kit includes the AT8 Modular Breakout Tone Generator and 200EP

Inductive Amplifier in a convenient carrying case (700C)

CAT. NO. UPC NO. DESCRIPTION

AT8K

08694

AdapToner Kit

AT8K

www.greenlee.com

301

COMMUNICATIONS

COPPER & DSL TESTING

802K Digital LAN Tracing Kit

• The 802K Digital LAN Tracing Kit is a powerful, unique troubleshooting

and tracing solution for LANs and other types of VDV wiring. The industry

standard 200FP filter probe (60Hz) is designed to eliminate hum from

fluorescent lights and AC power wiring that can obscure tracing tones

• The AT8L LAN Toner not only generates multiple tracing tones

and provides basic wiring tests, but indicates the presence of

10/100Base-T network service

CAT. NO. UPC NO. DESCRIPTION

802K

36000

Digital LAN Tracing Kit

802K

LAN Toner Kit

• Designed for the network installation and maintenance professional,

the LAN Toner sends tone and blinks HUB, Switch Port, and PC activity

lights for fast identification. This kit can be used on any wiring system

including Datacom, Telecom, security/alarm, audio and CATV

• Kit includes the AT8L LAN Toner and the 200GX Inductive Amplifier

in a rugged, woven nylon carrying case (700C)

CAT. NO. UPC NO. DESCRIPTION

AT8LK

60584

LAN Toner Kit

AT8LK

CATV Cable Tone Test Kit

• Designed specifically for the CATV industry, this kit allows you to tone through

splitters, directional couplers and traps

• Simple to use, the 402K provides accurate results and will eliminate long

delays trying to figure out non-tagged or mis-tagged cable drops

• Kit includes one transmitter, one receiver, one male F-to-F connector adapter

cable, one male F-to-alligator clip adapter cable and a carrying case (700C)

• Transmitter and receiver are equipped with female F-connectors

• Three methods of signal reception: electrostatic pickup for non-terminated

cables, electromagnetic pickup for terminated or shorted cables and direct

connection when identifying in the presence of passive devices

• In continuity mode, provides both audible tone and LED display

• Identifies the presence of AC or DC voltage on the cable under test

• Four selectable tone outputs for multiple line identification

CAT. NO. UPC NO. DESCRIPTION

402K

402T

402R

CS9

08677

60376

60377

60374

60378

CATV Cable Tone Test Set

Transmitter

Receiver

Male to male F-connector adapter cable

F-connector to alligator clip

CS19

TRUSTED

SINCE

1862

302

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Security and Alarm Kit

• Designed specifically for the security and alarm industry, the 620K

provides a simple method for identifying intermittent failures (swingers)

and confirming operation of switches at remote locations

• To better satisfy industry requirements, we’ve combined the Model PE620

Tone Generator with the popular Model 200EP Inductive Amplifier

in a durable woven nylon pouch (700C)

CAT. NO. UPC NO. DESCRIPTION

620K

08682

Security and Alarm Kit

620K

Tone and Probe Plus Cable-Check^™

RJ45 LAN Tester

• True cable mapping function identifies:

– Good connection, opens, shorts and crosses

– Connector and cable pin-out

– Clear LED display for each pin and shield

– Shielded RJ45 modular plug socket

• Automatic display of mapping with dual speeds: slow or fast

• Tests RJ11 and RJ45 cables with runs up to 600’

• Check polarity of telephone line

• View telephone line status: dial tone, ringing or busy line

• Provides talk power for telephone lines and butt set use

• Selectable dual/single tone application for balanced and

unbalanced circuits

• Four tone generator patterns

• Test continuity of wires, cables and loads

• Tone generator features auto-off function

• Jack for headset

• Audible speaker with adjustable volume control

CAT. NO. DESCRIPTION

PA1573

Tone & Probe Plus Cable-Check™ Kit

www.greenlee.com

303

COMMUNICATIONS

COPPER & DSL TESTING

Cabling Pouch

• Designed to hold a complete set of wiring tools including: any (one)

77 Series Tone Generator, any (one) 200 Series Inductive Amplifier, a

punchdown tool, a cabling knife and scissors

• Convenient loop to hold most telephone test sets

• Removable “parts pouch” allows you to keep small components in reach

• Made of a durable woven nylon

• Fits belts up to 5" wide.

CAT. NO.

UPC NO. DESCRIPTION

08685 Cabling Pouch

750C

Tone and Probe Carrying Case

• Allows you to build your own kit using any tone generator

and 200 Series probe

• Durable woven nylon

• Fits belts up to 3" wide

CAT. NO. UPC NO. DESCRIPTION

700C

08683

Tone and Probe Carrying Case

700C

TRUSTED

SINCE

1862

304

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

STRUCTURED WIRING TESTERS

NETcat^®Pro 2 NC-500

• Test and troubleshoot telephone, data and coax wiring

• NETcat Pro 2 Additional Features:

– Gigabit device capability detection (still detects 10baseT and 100baseT too)

– Cable type, velocity of propagation library, user editable

– Power over Ethernet (PoE) detection

– Memo pad

• Detect split pairs, short circuits, broken and crossed wires

• Step TDR technology shows length to open or short of all pairs

• Test shielded twisted-pair (STP), unshielded twisted-pair (UTP) & coaxial cables.

• Test patch cords and remote jacks

NC-500

• Touch-screen control, included stylus slots into main unit

• Large icons ensure easy use with your finger too

• Large 3" (76mm) backlit high-contrast (user adjustable) monochrome display is

highly visible in dark or brightly lit areas

• Remote test and ID unit stores in base of main unit

• Can identify up to 8 remote test ID units (7 extra available in NC-510 accessory

kit along with carrying case)

• Tone generator with four selectable precision frequency tones, compatible with

Greenlee advanced digital signal processing probes

• Operates on single 9V battery with low battery indication

SPECIFICATIONS

3.3" x 1.4" x 6.7" (8.5 cm x 3.5 cm x 17 cm)

0.45 lb. (200 g)

Dimensions

Weight

NC-510

(NC-500 not included)

9V Alkaline battery (PP3)

Power

Requirements

User Interface

Display LCD

Viewing Area

Backlight

Dot Pixels: 128 x 128 dots

60.0 x 58.4

White LED

Buttons

LCD touch-screen, Single

momentary contact push button

0°C to 50°C

Operating

Environmental

Temperature

Storage

-20°C to 70°C

Temperature

RJ45 shielded jacks

NC-520

Interface

F-type threaded female coaxial connectors

User selectable based on a known cable length.

40% to 100% in steps of 1%

0 to 2000 ft. -

Connections

TDR

NC-500 Contents:

Calibration

TDR Range

Resolution

Accuracy to

Open/Short

Remote

• NETcat Pro 2 main unit with stylus

• Removable remote jack and patch lead test and ID unit

• Twisted-pair (modular RJ45), coax (F) and

alligator clip test cords

1 ft. (0.3 m)

4% or 2 ft. (0.6 m) whichever is greater

• 9V alkaline battery

2000 ft. (609.6 meters) maximum distance

358 ft (100 meters) maximum distance

Identifier

Wiremap

NC-510 NETcat Pro 2 Accessory Kit Contents:

• Seven additional remote jack test and ID units,

RJ45 and F (male)

• Carrying case to hold additional remote test ID units

and content of NC-500 main kit

CAT. NO.

UPC NO. DESCRIPTION

NC-500

NC-510

NC-520

23639

23640

05450

NETcat Pro 2 Digital VDV Wiring Troubleshooter

NETcat Pro 2 Accessory Kit w/carry case

Netcat Pro 2 Main Unit With Stylus

NC-520:

• Netcat Pro 2 Main Unit With Stylus

• Removable Remote Jack And Patch Lead Test and

Id Unit

• Twisted-Pair (Modular Rj45), Coax (F) And Alligator ClipTest Cords

• Seven additional remote jack test and ID units, RJ45 and F (male)

• Carrying case to hold additional remote test ID units and content of NC-500 main kit

• 9V Alkaline Battery

www.greenlee.com

305

COMMUNICATIONS

COPPER & DSL TESTING

NETcat^®Micro NC-100

• Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and

coaxial cables

• TIA/EIA standard wiring pair verification

• Detects shorts, opens, reversed polarity, crossed and split pairs

• Generates three distinct, selectable digital tone patterns for cable tracing

and troubleshooting

• Tracing modes can be adjusted for high performance LAN cables.

• Complete set of connector types standard (telephone, LAN and coax)

• Nested remote allows end-to-end testing of all wiring types

• Simple testing of LAN wiring and phone lines

• Detection of common wiring and connector errors

• Warning of hazardous voltages

• Checks for reversed telephone wires

SPECIFICATIONS

150 x 70 x 33mm

Dimensions

Weight

Power Source

User Interface

220g including remote unit and battery

9V Alkaline battery (PP3)

Display LCD

Backlight

Buttons

Icon and seven segment type

Green LED

Four momentary contact push button

NC-100

Operating

Temperature

0°C to 50°C

Environmental

Storage

Temperature

-10°C to 60°C

Humidity

up to 95% non-condensing

RJ45 shielded socket

Interface

RJ12 6-way socket

Connections

F-type threaded female coaxial connectors

Minimum cable

length

2 to 3 meters (5 to 10 ft.) depending on cable type

Network Split

Pair Detection

Pair Tracing

Tones

Alternating frequencies of 577Hz and 983Hz are produced at three user se-

lectable rates. Designed for standard tone probes, but

compatible with precision digital Greenlee tone probes.

CAT. NO.

UPC NO. DESCRIPTION

23636

NETcat^®Micro Digital Voice Data and Video Wiring Tester

NC-100

TRUSTED

SINCE

1862

306

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

LAN ProNavigator^®Tester & Remote

• Simple PASS/FAIL test results in one second allows technicians to quickly

move on to the next test site

• Generates oscillating audio tone for use with tone probes to locate cables

• Tests data and telephone cables up to 320 feet (100 meters) for proper

pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and

common category 5 configurations

• Tests unshielded UTP and shielded STP data cable

• Detects good connections, open connections, crossed wires and split pairs

• Tests common BNC connected 50 and 75 ohm coaxial cables up to 320

feet (100 meters) for continuity

• Tests coaxial cable types RG58, RG59, RG6, RG6 Quad, Belden 8281, RG8,

RG11 and more

• Belt clips provided and lanyard holes embedded in case to attach

to belt or wrist

• Features low battery test and auto-off function to preserve battery life

• Includes standard 9V battery

CAT. NO.

DESCRIPTION

PA1543

LAN ProNavigator^®test set (main & remote),

2 RJ45 patch cords, 2 belt clips, 12 oz.(342 g)

PA901066 LAN ProNavigator^®test set (main & remote),

2 RJ45 patch cords, 2 BNC coaxial cables,

PA1543

2 CATV “F”-to-BNC adapters, 1 BNC/BNC adapter,

1 shielded RJ45 coupler, 2 belt clips in durable case

PA901074

Adapter, CATV “F” (female) to BNC (male)

NOTE: May not be compatible with CAT-6 flat or oval cable, or bonded cable.

SPECIFICATIONS

MAIN

REMOTE

KIT

Weight

8 oz. (228 g)

2 oz. (57 g)

2 oz. (1140 g)

PA901066

Dimensions

5.25" x 6.75" x 2.25"

133 mm x 171 mm x 57 mm

3.45" x 1.6" x 0.9"

87 mm x 41 mm x 24 mm 216 mm x 193 mm x 76 mm

8.5" x 7.6" x 3"

www.greenlee.com

307

COMMUNICATIONS

COPPER & DSL TESTING

Wiremap Tester

• Quickly identifies opens, shorts, reversals and transposed pairs

• Economical tester includes all the basic functions

• Connecting the receiver unit automatically activates the test process

• Sequencing red and green LEDs provide fast, accurate

and simple-to-understand results

• Alerts the technician if connected to an active circuit without harming the unit

• Connect any eight-position modular plug to the appropriate jack on the

transmitter and a sweeping tone signal is applied to all pairs

• At the far end of the cable, use any Greenlee Communications inductive

amplifier (probe) to locate the corresponding plug or jack

• Battery operated (9V not included)

CAT. NO.

UPC NO. DESCRIPTION

468

08661

60382

60379

60380

60381

Wiremap Tester

Carrying Case for the Wiremap Tester

Transmitter

Receiver

Modular Adapter Cable

468C

468T

468R

CSI0

Data/Link ID and Cable-Check^™

• Cable mapping function tests data & phone connection schemes including

patch cords and installed cables

• Identifies cross-over telephone connections

• Detects PC (NIC) & HUB data transmissions and PC (NIC) & HUB NLP or FLP

link pulse

• Identify data & link transmission speeds with real time detection: 100/10 MB

• Automatically scans with choice of slow or fast speeds

• Low battery detection on LAN ID tester

• Includes 9V battery, 2 RJ45 patch cords and durable nylon carrying case

with belt loop

CAT. NO. DESCRIPTION

PA1576

Data/Link ID and Cable-Check^™

PA1576

TRUSTED

SINCE

1862

308

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

LAN Cable-Check^™

• Identifies cross-over telephone connections

• Automatically scans when cables connected and unit turned on

• Two scan speeds: fast or slow

• Maps connector and cable pin-out

• Tests cables up to 1,650’ or 500 m

• Also tests RJ11 connections using an RJ11 adapter (not included).

• 2, RJ45 patch cords and 9V battery included

• Contained in a durable nylon carrying case with belt loop

CAT. NO. DESCRIPTION

PA1574

LAN Cable-Check^™Tester

PA1574

LAN and A/V Cable-Check^™

Network

• Tests RJ45 patch cords and network installations to identify good

connections, opens, shorts or cross-connections

• Identifies data and telephone connection schemes

• Maps cable pin-out

Coax

• Tests continuity of cords and installed cable runs

• Identifies good connections, opens and shorts

Features and Benefits:

• Automatic scanning

• User selectable slow or fast speeds

• Quickly check cable installations and patch cords

• Easy-to-use with clear LED read-outs

Includes:

• 2 RJ45 patch cords

• 9V battery

• 75-ohm male terminator

• Cable TV “F” female adapter • RCA to CATV "F" adapter.

• Durable, nylon carrying case

PA1594

CAT. NO. DESCRIPTION

PA1594

LAN and A/V Cable-Check^™

PC Cable-Check^™PRO

• Quickly & easily troubleshoot cables to eliminate the cable as the source

of a problem

• True cable mapping for over 20 different cable types: BNC coax & S-Video,

VGA, Firewire, USB & Mini-USB, PS/2, parallel printer, RS-232 serial and

Cat5e or Cat6 LAN

• Supports these connectors: male and female DB9, DB15, DB25 and

HDB15; 36-pin Centronics printer; RJ11, RJ12, RJ45 shielded &

unshielded; BNC coax female; male and female mini-DIN6; female mini-

DIN4; USB-A and USB-B; mini-USB 5-pin; IEEE 1394 FireWire 4- and 6-pin

• Tests 50 ohm cables up to 1000’ (305 m) & 75 ohm cables up to

600’ (183 m)

• Easy to read and understand LED indicator lights

• New rugged case with built-in handle for easy transport

• Auto scan or manual scan modes

• Rubber feet grip to desk or bench to prevent slipping

• Auto-off after 30 seconds of non-use to extend battery life

• 9V battery included

PA1577

CAT. NO. DESCRIPTION

PA1577

PC Cable-Check^™Pro

www.greenlee.com

309

COMMUNICATIONS

COPPER & DSL TESTING

BURIED FACILITY LOCATION AND MARKING

Tracker II

• Traces the path and determines the depth of wires and metallic pipes on active or

dead systems without having to deactivate the system

• Lightweight receiver provides audible and visual indications of signal strength

• Transmitter output and receiver sensitivity are fully adjustable for

maximum accuracy

• Transmitter offers three methods of connection: direct, inductive coupler and

inductive antenna

• Includes transmitter assembly, receiver assembly, inductive coupler (clamp), built-in

inductive antenna, two 8' (2.4 m) test leads with heavy-duty alligator clips and

durable polyethylene case

• High frequency transmitter provides range up to 4,000' (1,219 m) and depths

501

up to 7' (2 m)

HS-1 (08695)

• Receiver is 32" long (813 mm)

Optional headset is available

_{for use in high-traffic areas or}• Battery operated (eight AA and one 9V battery is included)

• Molded carrying case included

other noisy environments.

SPECIFICATIONS

CAT. NO. UPC NO. DESCRIPTION

501

08662

60353

60352

60354

60355

60351

Tracker II

Transmitter

Receiver

Inductive Clamp

Transmitter Cord Set

Case with Antenna

Power Requirements

Battery Life

Transmitter – (8) AA batteries; Receiver – (1) 9V battery

Transmitter – 30 hours nominal; Receiver – 10 hours nominal

447.5kHz

40Vp-p (140mW) maximum

240VAC/500VDC

501T

501R

IC1

CS16

500CA

Transmitter Frequency

Transmitter Power

Voltage Protection

Automatic Shut Off

Construction

90 Min. Transmitter and Receiver

Transmitter/Receiver – powder coated aluminum

Case – vacuum formed polyethylene

Transmitter – 4.25" x 3" x 3.25" (108 x 76.2 x 82.6 mm)

Receiver – 32" x 2.75" x 4" (812.8 x 69.9 x 101.6 mm)

Case – 33.5" x 8.25" x 3.75" (850.9 x 209.6 x 95.3 mm)

6.7 lbs. complete kit (3.04 kg)

Dimensions

Weight

Buried Line Locator

• LED and LCD signal strength indicators make it quick and easy to find

exact line location

• Lightweight and ergonomically balanced

• Automatic signal boost makes it easy to trace lines, even those with

very weak signals

• Receiver may be used in active or passive mode

• Receiver locates multiple passive frequencies with a single setting

• Receiver automatically locks out passive range when it detects a transmitter

signal, reducing the chance of tracing other lines carrying weaker signals

• Microprocessor-based circuitry delivers increased accuracy and features

auto-gain control in all environments

BLL-200

• Traces 20' (6 m) underground and provides depth readings up to 15' (4.57 m).

• Transmitter can be connected to live lines up to 600V

• Molded carrying case included

• Limited Lifetime Warranty

SPECIFICATIONS

CAT. NO. UPC NO. DESCRIPTION

BLL-200

07796

Buried Line Locator

Transmitter

Receiver

Operating Voltage

0-600VAC,

0-300 VDC

Depth Range

Measures:

Traces:

0-15 ft

0-20 ft.

Current

13mA (open line)

150mA (live or shorted line)

33.3kHz

Depth Resolution

Passive Trace Frequency - 12Hz-24kHz

Operating Temperature

0.1 ft. increments

Frequency

0°F to 120°F

Operating Temperature 0°F to 120°F

(-17°C to 50°C)

4.1" x 8.5" x 38"

(-17°C to 50°C)

Size

7.5" x 4" x 2.1"

(104.1 mm x 215.9 mm x 965.2 mm)

6 VDC (4 AA batteries)

1 lb. 12 oz. (794 g)

(190.5 mm x 101.6 mm x 53 mm)

6 VDC (4 AA batteries)

15 oz. (425 g)

Power

Weight

Power

Weight

(with batteries and clamp)

TRUSTED

SINCE

1862

310

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Pulser Fault Locator

• Identifies the exact location of even the smallest breaks in insulation

by “pulsing” a high-voltage signal that radiates into the earth at the location

of the faults. With the A-frame mounted receiver, a visual analog meter

points the way to the source of the voltage

• Multiple faults on a single wire can be identified indicating the need

to replace instead of repair

PE2003

Great complement to any

buried line cable locator.

• Extra-long test leads feature heavy-duty alligator clips for use on multiple

cable types

• Includes a rechargeable transmitter, receiver, A-frame, ground stake,

120V charger and a 12V DC (cigarette lighter) adapter

• Battery operated (one 12V and one 9V battery are included)

• Molded carrying case included

SPECIFICATIONS

Power Requirements

Transmitter: (1) 12V rechargeable battery

Receiver: (1) 9V battery

Battery Life

Transmitter: 23 hours per charge; Receiver: 200 hours

2400VDC peak

240VAC/400VDC

Transmitter – aluminum housing in polyethylene case

Receiver – powder coated aluminum

Transmitter – 17" x 8.5" x 6.5" (421 mm x 215 mm x 160 mm)

in case

Receiver – 33.5" x 21.75" x 3.25" (840 mm x 550 mm x 8 mm)

on A-Frame

PE2003

Transmitter Power

Voltage Protection

Construction

CAT. NO.

UPC NO. DESCRIPTION

Dimensions

PE2003

2000H

2000R

AF2

08666

60357

60358

60482

60360

60361

66216

Pulser

Transmitter (Includes CH1 & CH2)

Receiver

A-Frame

Weight

12.5 lbs. (5.7 kg) complete

CH1

AC Charger

CH2

DC Charger

59F0002

Battery, Replacement (12V 2.5 Ah)

Wire Finder/Mini Locator

• Traces energized or non-energized wires in walls and drop ceilings

• Provides reliable results on buried cables to depths of 3' (1 m)

and lengths up to 1000' (308 m)

• Determines the approximate depth of the wire before digging

• Compact design and easy-to-understand operations

• Fully adjustable transmitter and receiver for accurate locating

• Quick change test leads for use in any industry, even international

power outlets

508S

• Voltage protection to allow use on live AC circuits

• Automatic shut-off to prevent accidental battery discharge

• Housed in a durable, molded carrying case with a quick reference operation

guide on the inside of the lid

• Battery-operated: (2) 9V batteries included

SPECIFICATIONS

Power Requirements

Battery Life

Transmitter Frequency

Transmitter Power

Voltage Protection

Construction

(1) 9V each (transmitter and receiver, included)

Transmitter 35 hours nominal; Receiver 20 hours nominal

447.5kHz

9Vp-p (11mW)

240VAC/500VDC

Transmitter/Receiver – high-impact ABS plastic,

Case – vacuum-formed polyethylene

Transmitter – 4" x 2.3" x 1" (101.6 x 58.4 x 25.4 mm), Receiver –

6" x 2.35" x 1" (152.4 x 59.7 x 25.4 mm),

Case – 9.5" x 8" x 3"(241.3 x 203.2 x 76.2 mm)

2.6 lbs. (1.2 kg)

CAT. NO. UPC. NO

DESCRIPTION

508S

508ST

508SR

CS14

08678

60363

60364

60366

60367

Wire Finder/Mini Locator

Transmitter

Receiver

Alligator Clip Cord set

AC Outlet Cord set

Dimensions

Weight

CS15

www.greenlee.com

311

COMMUNICATIONS

COPPER & DSL TESTING

Wire and Valve Locator

• Adjustable transmit power allows you to select the best signal for maximum

performance

• Transmitter’s high power output offers extended range and use on higher

resistance wire paths that other locators can’t touch

• Receiver provides both audible and visual indications of signal strength.

• Lightweight receiver wand makes it easy for you to move along quickly

to locate even the longest wire path

• Rugged headphones block ambient noise and improve “feel” for the signal

• Includes transmitter, receiver, headset, ground stake, and complete instructions

• Battery-operated: (8) “D” Cells and (1) 9V

SPECIFICATIONS

521A

Power Requirements

Battery Life

Transmitter: (8) “D” Cell;

Receiver: (1) 9V battery

Transmitter: 50 hours nominal

Receiver: 100 hours nominal

1748Hz

750Vp-p 285Vrms

120VAC/250VDC

Powder-coated aluminum housing in polyethylene case

33.5" x 8.25" x 3.75"

12 lbs. complete

CAT. NO.

UPC NO. DESCRIPTION

Transmitter Frequency

Transmitter Power

Voltage Protection

Construction

Case Dimensions

Weight

521A

521A-R

HS-1

86788

12623

08695

Wire and Valve Locator

Receiver

Headset

Locators Application Guide

FEATURE

BLL-200

501

PE2003

508S

521A

Trace concealed wiring in walls and floors

Locate junction box relays and transformers

Locate switch gear

•

2

1

Find shorts to ground

•

Trace wires in PVC (nonmetallic conduit)

Find opens in a circuit

•

Localize power and lighting panels

Operate on energized circuits

Operate on telecom circuits

Operate on power circuits (600VAC)

Operate on unenergized circuits

Trace shielded cable

•

3

•

Trace buried metal conduit

Trace coax cable

5

4

•

Auto gain circuitry for improved accuracy

AC voltage range

0-600V

0-300V

5,000 ft.

(4) AA

0-240V

0-500V

0-240V

0-400V

5000 ft.

0-240V

0-500V

1000 ft.

(1) 9V

0-120V

0-250V

DC voltage range

7

6

Distance–receiver from transmitter

Transmitter battery

•

(8) AA

(1) 9V

12V

rechargeable

(1) 9V

(8) D

Receiver battery

(4) AA

(1) 9V

1. 10,000 ohms and less–both ends isolated from grounds.

2. Does not locate the path–has to be predetermined and only in direct burial applications. 5,000,000 and less.

3. Transmitter connected to metallic shield.

7. Direct Connection 4,000 ft at 7 ft deep

Inductive Coupler 1,000 ft at 3 ft deep

Inductive Antenna 700 ft at 3 ft deep

4. Will trace coax providing the bOnd is in place at the remote end–will disrupt service.

5. No sorting (high RF bleeds) can trace coax if transmitter connected to braid.

6. Low frequency locators need a “path to earth” (dirt), 5000 ft. on an open conductor and 2500 ft. on a metallic pipe at 3 ft. deep

TRUSTED

SINCE

1862

312

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Marker-Mate^®

• Designed to locate buried electronic markers, including Omni Marker^™,

and Uni Marker^®

• Five+ foot depth range

• Detects up to seven different marker types

• Scan mode provides simultaneous detection of all marker types

• User-adjustable Detection Threshold

• Digital signal processor accuracy

• Large-character display is easy to read

• Bar graph, numeric & audible signal strength indicators

• Speaker volume adjust

• Headphone jack

• Battery level indicator

• Low battery warning

• Adjustable time out feature prolongs battery life (and can be turned off)

• Weather resistant

• Rugged construction

SPECIFICATIONS

Electrical:

Twelve AA batteries

Battery Life: 20 hours typical

Environment:

Operating Temperature:

Storage Temperature:

Weather Resistant

-4°F to 122°F (-20°C to 50°C)

-40°F to 158°F (-40°C to 70°C)

Physical:

Length:

Width:

30.7 in. (780 mm)

7.8 in. (198 mm)

Height:

Weight:

12.8 in. (325 mm)

4.5 lbs. with batteries (2 kg)

EML100

CAT. NO.

EML100

UPC NO. DESCRIPTION

60798 Marker-MateElectronic Marker Locator

Omni Marker^™

• Electronically marks and relocates buried facilities

• Unique design produces a uniform, spherical RF field in every direction

• Easily located up to 5' away with any modern marker locator

• Wider field with a signal peak directly above the marker provides

precise location

• Requires no particular orientation when buried

• Greater range than standard 4" ball markers

• High-reliability design lasts as long as your buried plant

• Color coded by utility application

• Patented

• Limited lifetime warranty

APPLICATION

COLOR

FREQUENCY CAT NO.

UPC NO.

Power

Water

Red

Blue

169.8 kHz

145.7 kHz

0160-0001-1

60765

60766

60767

60768

60769

60770

11050

05160

0161-0001-1

0162-0001-1

0163-0001-1

0164-0001-1

0165-0001-1

0168-0001-1

0181-0001-1

Sanitary

Telephone

Gas

Cable TV

Non-Potable/Gen I Purple

EuroPower Red/Blue

Green

121.6 kHz

101.4 kHz

83.0 kHz

77.0 kHz

66.35 kHz

134.0 kHz

Orange

Yellow

Orange/Black

www.greenlee.com

313

COMMUNICATIONS

COPPER & DSL TESTING

Uni Marker^®

• Electronically marks buried facilities for later relocation

• Rugged polyethylene case ensures years of useful life

• Small size and flat design attach easily to non-metallic utility box lids,

hand holes and other buried enclosures

• Location is simple with any modern marker locator

• Range is 25% more than other similar-style markers

• Signal peak ensures location within inches of the marker

• Color coded by utility application

• Limited lifetime warranty

APPLICATION

COLOR

FREQUENCY CAT NO.

UPC NO.

60771

Power

Red

169.8kHz

145.7kHz

121.6kHz

101.4kHz

83.0kHz

77.0kHz

0170-0001-1

Water

Blue

0171-0001-1

0172-0001-1

0173-0001-1

0174-0001-1

0175-0001-1

0178-0001-1

60772

60773

60774

60775

60776

11059

Sanitary

Telephone

Gas

Green

Orange

Yellow

Orange/Black

Cable TV

Non-Potable/Gen I Purple

66.35kHz

TRUSTED

SINCE

1862

314

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

FIBER OPTIC TEST EQUIPMENT

Optical Fusion Splicer

• Designed to meet virtually any FTTx installation – indoors and out. P2P installations

including backhaul, cellular, and LAN

• Core alignment minimizes splice losses

• Fully compatible with Greenlee® Splice-On Connectors. 250 Splice/ Shrink cycles

per battery charge

910FS

SPECIFICATIONS

Applicable Fibers

SM (G.652); MM (G.651); DS (G.653); NZDS (G.655);

BIF (G.657)

Fiber Display Magniﬁcation

Tube Heating Mode

240X

20 Preset / User Deﬁnable Modes

Adjustable 0-240 seconds

Fiber Cleaved Length

Cladding Diameter

Coating Diameter

Fiber Count

10mm

Tube Heating Time (Typical)

Attenuator Mode

Electrode Life

36 seconds

80 to 150μm

100 to 1000μm

Single

0.1 to 15 dB

3,000 Splices

Display

5.7" Color, Turn-Over LCD

RS-232; USB

Fiber Aligning Method

Splice Loss (Typical)

Auto Core Alignment

Connectivity

0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB

(NZDS & BIF)

Operating Conditions

Pressure: 0 to 16,404 feet

(0 to 5,000 meters) above Sea Level

Humidity: 0 to 95%

Temperature: 14 to 122°F (-10 to 50°C)

Splicing Mode

60 Preset / User Deﬁnable Modes

9 seconds (SM)

Splice Time (Typical)

Number Of Splices Per Bat-

tery Charge

250 (including 60mm heat shrink cycle)

Storage Conditions

Power Supply

Temperature: -4 to 158°F (-20 to 70°C)

100 to 240V AC Adapter;

Li-ion Battery (6600 mAh)

Splice-On-Connector

Arc Calibration Mode

Protection Sleeve Length

Storage Of Splice Results

Tension Test

SC, LC, FC, ST

Automatic and Manual

60mm, 40mm, Micro Sleeves

5,000 Results

Weight with Battery

Dimensions (HxWxD)

6.92 lbs (3.14 kg)

7.08" x 6.29" x 6.10" (180 x 160 x 155 mm)

2N

CAT NO.

UPC NO.

01328

DESCRIPTION

910FS

910FS-KIT1

910FS-KIT2

910FS-ELEC

910FS-PS

910CL

910CL-BLADE

910FS-250

Optical Fusion Splicer

Fusion Splicer & Cleaver Kit

Contractor Fusion Splicer Kit

Replacement Electrodes

Replacement Power Supply

Optical Fiber Cleaver

Cleaving Wheel

250µm Adapter

900µm Adapter

Adapter, Splice-On Connector, SC & LC

Adapter, Splice-On Connector, ST & FC

Battery (910FS)

European Line Cord

UK Line Cord

Battery Charger

12 V DC Car Adapter

ProGrip 5-in-1 Fiber Optic Stripper

01433

01432

01329

01330

01331

01640

01332

01333

01335

02401

01452

02571

02570

02641

25689

12225

PA1171

910FS-900

910FS-SOC-SC-LC

910FS-SOC-ST-FC

910FS-BATT

910FS-EUR-CORD

910FS-UK-CORD

910FS-CHARG

910FS-CAR-ADAPTER

PA1171

www.greenlee.com

315

COMMUNICATIONS

FIBER PRODUCTS

Optical Fiber Cleaver

• Accurate Cleaves. Cleave multi-mode and single-mode fiber optic cables

• Long Life. Blades rotate for longer life - over 48,000 cleaves

• Adaptable. Supports 250um, 900um fibers

• For use with the 910FS Optical Fusion Splicer for maximum speed and efficiency

• Dust bin. Safely collects end cuts during cleaving process

SPECIFICATIONS

910CL

Applicable Fibers

Fiber Cleaved Length

Cladding Diameter

Coating Diameter

Fiber Count

SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657)

10mm

125μm

0.25 mm and 0.9 mm

Single

Cleaving Angle

Blade Life

< 1.5˚

48,000 Cleaves

Weight

Dimensions

0.56 lbs (255 g)

2.29" x 2.17" x 1.89" (58 x 55 x 48 mm)

Note: If the 910CL is purchased without a

splicer. Please order either the 250um or

900um adapters or the ﬁxed clamp.

CAT. NO.

UPC NO. DESCRIPTION

910CL

01331

16403

31529

01328

01332

01333

12225

10312

Optical Fiber Cleaver

Cleaving Wheel

Fixed Clamp with Screw (910CL)

Optical Fusion Splicer

250µm Adapter

900µm Adapter

Buffer Strippers

Kevlar Cutter

910CL-BL ADE

910C-CLAMP

910FS

910FS-250

910FS-900

PA1171

PA1511

Splice-On Connector

• Return loss: APC >60dB, UPC >55dB and MM 35dB (typical)

• 19 styles available: SM, MM, 10Gig

• Compatible with selected AFL, Sumitomo, and Fitel fusion splicers, suitable adapter

may be required

• 900um boot protects splice for easy cable management

• Includes color coded 900um buffer, boot, cleave protector and extended dust cap for

easy fiber indentification

SPECIFICATIONS

Connector Type

SM/APC SM/UPC MM/62.5UM MM/50UM MM/0M3 MM/0M4

Insertion Loss (Max)

Optical Return Loss

Ferrule Type

Color Code

Operating Temperature

Industry Standards

0.3dB

>55dB

0.4dB

35dB (Typical)

All Zirconica Pre-Polished Ferrules

>65dB

Green

White

Beige

Black

-40 to 85 degrees C

RoHS Compliant, Tecordia GR-326-CORE Compliant

Aqua

COMPATIBLE FUSION SLICERS

Manufacturer

Model

AFL

Sumitomo

Fitel

INNO

FIS

FSM11

(S/M)

FSM-17S

FSM-18S

FSM-19S

Type-25e

(U/S/M)

S122

(A/C/M/)

IFS10

CA3

Type-39FH

S121 (A/M) IFS15

S123 (C/M)

S153

FSM-60(S/R) Type-46

FSM-70(S/R) Type-66

Quantum

S178A

(Q101-CA)

Compatible

fiberTOOLS^®SOCs

All

Versions

SC and

LC Only

SC,LC and

ST Only

All

Versions

All

Versions

All

Versions

All

Versions

TRUSTED

SINCE

1862

316

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Splice-On Connectors & Adapters

CAT. NO.

(12 PACK)

CAT. NO.

(100 PACK)

UPC

DESCRIPTION

SCAPC-SOC-12

SCUPC-SOC-12

SC62-SOC-12

SC50-SOC-12

SCOM3-SOC-12

SCOM4-SOC-12

FCAPC-SOC-12

FCUPC-SOC-12

FC62-SOC-12

FC50-SOC-12

FCOM3-SOC-12

FCOM4-SOC-12

STUPC-SOC-12

ST62-SOC-12

ST50-SOC-12

STOM3-SOC-12

STOM4-SOC-12

LCAPC-SOC-12

LCUPC-SOC-12

LC62-SOC-12

LC50-SOC-12

LCOM3-SOC-12

LCOM4-SOC-12

02302

02303

02304

02305

02306

02308

02313

02314

02316

02322

02323

02328

02330

02332

02334

02335

02343

02345

02346

02348

02351

02355

02359

SCAPC-SOC-100

SCUPC-SOC-100

SC62-SOC-100

SC50-SOC-100

SCOM3-SOC-100

SCOM4-SOC-100

FCAPC-SOC-100

FCUPC-SOC-100

FC62-SOC-100

FC50-SOC-100

FCOM3-SOC-100

FCOM4-SOC-100

STUPC-SOC-100

ST62-SOC-100

ST50-SOC-100

STOM3-SOC-100

STOM4-SOC-100

LCAPC-SOC-100

LCUPC-SOC-100

LC62-SOC-100

LC50-SOC-100

LCOM3-SOC-100

LCOM4-SOC-100

02360

02361

02364

02365

02368

02371

02372

02377

02378

02379

02381

02384

02385

02386

02387

02388

02389

02390

02395

02397

02398

02399

02400

SC/APC Singlemode, Green 900µm Boot

SC/UPC Singlemode, Blue 900µm Boot

SC/PC 62.5µm Multimode (OM1), Beige 900µm Boot

SC/PC 50µm Multimode (OM2), Black 900µm Boot

SC/PC 50µm Multimode (OM3), Aqua 900µm Boot

SC/PC 50µm Multimode (OM4), Aqua 900µm Boot

FC/APC Singlemode, Green 900µm Boot

FC/UPC Singlemode, Blue 900µm Boot

FC/PC 62.5µm Multimode (OM1), Beige 900µm Boot

FC/PC 50µm Multimode (OM2), Black 900µm Boot

FC/PC 50µm Multimode (OM3), Aqua 900µm Boot

FC/PC 50µm Multimode (OM4), Aqua 900µm Boot

ST/UPC Singlemode, Blue 900µm Boot

ST/PC 62.5µm Multimode (OM1), Beige 900µm Boot

ST/PC 50µm Multimode (OM2), Black 900µm Boot

ST/PC 50µm Multimode (OM3), Aqua 900µm Boot

ST/PC 50µm Multimode (OM4), Aqua 900µm Boot

LC/APC Singlemode, Green 900µm Boot

LC/UPC Singlemode, Blue 900µm Boot

LC/PC 62.5µm Multimode (OM1), Beige 900µm Boot

LC/PC 50µm Multimode (OM2), Black 900µm Boot

LC/PC 50µm Multimode (OM3), Aqua 900µm Boot

LC/PC 50µm Multimode (OM4), Aqua 900µm Boot

ADAPTER

UPC

DESCRIPTION

AFL SOC ADAPTER

FITEL SOC ADAPTER

SUMI SOC ADAPTER

INNO SOC ADAPTER

FIS SOC ADAPTER

01304

02052

02058

02060

02062

AFL/Fujikura SOC Adapter

Furakawa/Fitel SOC Adapter

Sumitomo SOC Adapter

Inno SOC Adapter

FIS Super Cougar SOC Adapter

www.greenlee.com

317

COMMUNICATIONS

FIBER PRODUCTS

930XC Handheld Singlemode OTDR

CAT. NO.

UPC NO.

DESCRIPTION

89882

89872

89877

89892

89887

19237

19238

19239

19240

02618

19247

19248

02621

19249

19250

25688

25689

25690

60571

60692

20988

20989

20990

20996

20997

20998

25691

25692

20999

10582

02729

930XC-20C UPC SC

930XC-20C UPC FC

930XC-20C UPC ST

930XC-20C APC SC

930XC-20C APC FC

930XC-30P UPC SC

930XC-30P UPC FC

930XC-30P UPC ST

930XC-30P APC SC

930XC-30P APC FC

930XC-30F UPC SC

930XC-30F UPC FC

930XC-30F UPC ST

930XC-30F APC SC

930XC-30F APC FC

930XC-20M PC FC

930XC-20M PC SC

930XC-20M PC ST

946

Handheld OTDR, 1310/1550 nm, SC/UPC

Handheld OTDR, 1310/1550 nm, FC/UPC

Handheld OTDR, 1310/1550 nm, ST/UPC

Handheld OTDR, 1310/1550 nm, SC/APC

Handheld OTDR, 1310/1550 nm, FC/APC

Handheld OTDR, 1310/1490/1550 nm, SC/UPC

Handheld OTDR, 1310/1490/1550 nm, FC/UPC

Handheld OTDR, 1310/1490/1550 nm, ST/UPC

Handheld OTDR, 1310/1490/1550 nm, SC/APC

Handheld OTDR, 1310/1490/1550 nm, FC/APC

Handheld OTDR, 1310/1550/1625 nm, SC/UPC

Handheld OTDR, 1310/1550/1625 nm, FC/UPC

Handheld OTDR, 1310/1550/1625 nm, ST/UPC

Handheld OTDR, 1310/1550/1625 nm, SC/APC

Handheld OTDR, 1310/1550/1625 nm, FC/APC

Handheld OTDR, 850/1300 nm, FC/PC

Handheld OTDR, 850/1300 nm, SC/PC

Handheld OTDR, 850/1300 nm, ST/PC

Cleaning Wand 10/PK

• Up to 38 db dynamic range

• Large backlight LCD display

• Measure length and defects of coiled fiber

• Fiber analysis software for data management

and report generation

• 1625 nm operation for live fiver testing

• RS-232/USB interface

• Economical

948

REEL Cleener CONN Cleaner (948)

20988

20989

20990

Soft Carrying Case

USB Cable for OTDR

RS-232 Cable

FC Connector (for UPC & APC)

AC-CONN-FC-L2

AC-CONN-ST-L2

AC-CONN-SC-L2

AC-ADPT-20-UNIV

930XC-QR

ST Connector (for UPC only)

SC Connector (for UPC & APC)

• Compact handheld design

• Easy to use

• Fast automated testing

Power Supply Universal

Quick Reference Guide - UN

NiMH Battery (9.6V)

Car Adapter

20999

• NiMH batteries for 8 hours continuous use

1155-0526

930XC-SM-MM

OTDR Kit - Single and Multimode OTDR Kit.

SINGLEMODE SPECIFICATIONS

Fiber Type

930XC-20C

930XC-30F

930XC-30P

930XC-20M

Wavelength ( 20nm)

Dynamic Range (dB)

Event deadzone (m)

Attenuation Deadzone (m)

Emitter Type

1310/1550

1310/1550/1625

1310/1490/1550

800/1300

18/22

7

20

LED

35

2.5

14

38

1.5

10

38

2.5

14

Laser

12/30/100/275/1us (850nm)

30/100/275/1us/2us (1300nm)

0.1/0.3/0.5/1.3/2.5/5/10 (850nm) 0.1/0.3/0.5/1.3/2.5/5/10

/20/40/80 (1300nm)

Pulsewidth (ns)

5, 10, 30, 100, 300, 1 us, 2.5 us, 10 us, 20 us

Selectable Ranges (km)

0.3/1.3/2.5/5/10/20/40/80/120/160/240

Average Time

Distance measurement accuracy

Connector Type

15s/30s/1 min/2 min/3 min

(1m + 5 X 10^-5x distance + sampling space)

UPC or APC (interchangeable FC, SC, ST)

Visual Fault Locator

Wavelength

650 nm

-3 dBm

(interchangeable FC, SC, ST)

Peak power output

Connector interface

Fiber Analysis Software

Reflection detect accuracy

Attenuation detect accuracy

Measurement data storage

Data transmission

General

4 dB

0.05 dB/dB

1,000 test curves

RS-232/USB port

Power Supply

Battery Life

Operating Temperature

Storage Temperature

Relative Humidity

Weight

NiMH chargeable battery/AC adapter

Support over 8 hours operating on one charge or over 20 hours standby

-10° to 50° C

-20° to 60° C

0 to 95% (non-condensing)

1.9 lbs. (0.87 kg)

Dimensions

7.7" H x 3.9" W x 2.4" L (196mm x 100mm x 64mm)

TRUSTED

SINCE

1862

318

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Fiber Identifier

• Non-intrusive low insertion loss prevents alarm conditions

• Identifies fiber with tone detect and a clear indication of signal

transmission direction

• Supports all common fibers including 250μm, 900μm, 2mm, and

3mm and is able to sense light in bend insensitive fibers

SPECIFICATIONS

Identiﬁed Wavelength Range

Identiﬁed Signal Type

Detector Type

800-1700nm

270Hz 5%, 1kHz 5%, 2kHz 5%

1mm InGaAs

Ø0.25 (Applicable for Bare Fiber)

Ø0.9 (Applicable for Ø0.9 Cable)

Ø2.0 (Applicable for Ø2.0 Cable)

Ø3.0 (Applicable for Ø3.0 Cable)

Left & Right LED

Adapter Types

FI-100

Signal Indication

SPECIFICATIONS

-46 to 10dBm (1310nm)

-50 to 10dBm (1550nm)

Signal Direction Test Range

(CW/0.9mm ﬁber)

ENVIRONMENTAL

Operating temperature -10 ° C to +60° C

Signal Power Test Range

(CW/0.9mm ﬁber)

-50 to +10dBm

Storage temperature

Dimensions

-25° C to +70° C

14.2 x 4.3 x 3.3 cm (5.6 x 1.7 x 1.3 in.)

120 g (4.2 oz.) with batteries

CE, FCC, WEEE

Signal Frequency Display

270Hz, 1kHz, 2kHz

Weight

-30 to 0dBm (270Hz, 1kHz)

-25 to 0dBm (2kHz)

-25 to 0dBm (1kHz, 2kHz)

Certiﬁcations

Ø0.9, Ø2.0, Ø3.0

Ø0.25

Tone Detect Test Range

(Average)

-20 to 0dBm (2kHz)

0.3 / 0.8dB at 1310nm

1.5 / 2.5dB at 1550nm

AAA Alkaline (2)

Insertion Loss

(Typical/ Maximum)

Battery

CAT. NO.

UPC NO. DESCRIPTION

FI-100 Kit

FI-100-250

FI-100-900

FI-100-2MM

FI-100-3MM

FI-100-CASE

FI-100-SUNSHADE

03353

03354

03355

03356

03357

03358

03359

Fiber Identifier Kit

250µm Adapter

900µm Adapter

2mm Adapter

3mm Adapter

Soft Carry Case

Sun Shade

www.greenlee.com

319

COMMUNICATIONS

FIBER PRODUCTS

180XL Visual Fault Locator

• The 180XL can be used to confirm fiber continuity on fibers up

to 7km in length

• A 1.25mm adapter is available

• Has up to 80 hours of operation

• Ruggedized design - not made of plastic

• Class 2 for safe operation - 1mW output power

• 650nm propagates more efficiently than 635nm in single mode fiber

SPECIFICATIONS

Wavelength

650nm +/-10nm

0dBm (1mW)

7km

2

2.5mm Universal

1.25mm adapter available

AA (2)

180XL

Output Power

Maximum Distance

Laser Classification

Bulkhead

Battery

Battery Life

Weight

80 hours

120 g (not including batteries)

Dimensions

180mm x 15mm (diameter)

CAT. NO.

UPC NO. DESCRIPTION

84501 Visual Fault Finder

180XL

Fiber Cleaning Pens - 1.25mm & 2.5mm

• Cleans 2.5mm & 1.25mm ferrules and bulkheads

• Compact, easy-to-use single click operation

• Rated for 800 cleaning cycles

• Anti-static design prevents secondary contamination

SPECIFICATIONS

Ferrule & Connector Sizes 1.25mm & 2.5mm

Weight

1 oz (20g)

Dimensions

Working Temperature

Storage Temperature

7.1" x 0.7" x 0.7" (180mm x 18mm x 18mm)

-10ºC to +50ºC

-30ºC to +70ºC

CAT. NO.

UPC NO.

DESCRIPTION

FCP-1.25

FCP-2.5

03577

03576

1.25mm Cleaning Pen

2.5mm Cleaning Pen

FCP-1.25mm

FCP-2.5mm

TRUSTED

SINCE

1862

320

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Optical Light Sources

• Durable and compact

• Provides a stable light source

• Interfaces to all industry standard connectors

SPECIFICATIONS

GDLS 350

GDLS 355 / GDLS 360

850nm &

1300nm LED

1310nm, 1550nm Laser/

1490nm, 1625nm Laser

Wavelength

Output power

- 20dBm Typical

-4dBm Typical

Laser Classification

N/A

Class 1 (FDA 21 CFR1040.11)

+/- 0.05dB, 1 hour, + /- 0.03dB

long after 15 minute warm-up

Output stability

Spectral Width

Optical interface

Power on

40nm/120nm

5nm/5nm

Universal Connector Interface (FC, SC, ST & LC )

Push button ON, Auto shutoff

2kHz

Tone Output

GDLS 350

Dimensions

6.1 x 0.94 x 0.75in (15.5 x 2.38 x 1.90cm)

3oz (85g)

Weight

Operating Temperature

Storage Temperature

-10C to 50°C

SPECIFICATIONS

-30C to 60°C

ENVIRONMENTAL

Operating temperature -10 ° C to +50° C

CAT. NO.

UPC NO. DESCRIPTION

Storage temperature

Weight

-30° C to +60° C

3 oz (85g)

Optical Light Sources

GDLS 350

GDLS 355

00518

00519

03203

21033

850/1300 Dual LED

1310/1550 Dual Laser

1490nm/1625nm Dual Laser

Single Instrument pouch

GDLS 360

78-0160-70

Connector Options

GAC 022B

GAC 023B

GAC 024B

00440

00441

00442

00443

SC Adapter for source

FC Adapter for source

ST Adapter for source

LC Adapter for source

GAC 025B

Note: SC Adapter included with all laser and LED sources

www.greenlee.com

321

COMMUNICATIONS

FIBER PRODUCTS

Optical Power Meter

• Singlemode and multimode application

• Calibrated wave lengths of 850nm, 1310nm, 1490nm, and 1550nm

• Data transfer via USB for the GRP 460

• 2kHz Tone detect

• NIST traceable

• Long Battery Life

GRP 450-02

GRP 460-02

GRP 450-04

GRP 460-04

Filtered InGaAs

SPECIFICATIONS

Diode

Ge

Wavelength range

Measurement range

Resolution

850nm to 1625nm

+23 to –45dBm

+ 3 to – 60dBm

0.01dB

+/- 0.25dB

Absolute accuracy^∆

Universal 2.5mm (Order 1.25mm or screw on

adaptors separately)

Optical interface

Tone identification

Power on

2kHz Incoming signal, Audible Alert

Push button ON, Auto shutoff

GRP460

Storage

Store up to 1000 measurements per wavelength*

Mini USB Port (1000 points/wavelength)*

6.1 x 0.94 x 0.75 in (15.5 x 2.38 x 1.90cm)

3.0oz (85g)

Data transfer

Dimensions

Weight

CAT. NO.

UPC NO. DESCRIPTION

Optical Power Meter

GRP 450-02

GRP 450-04

GRP 460-02

GRP 460-04

78-0160-70

Connector Options:

GAC 020

GAC 021

GAC 026

GAC 027

GAC 028

00502

00505

00509

00511

21033

Germanium, 0.01dB, Zero ref set

Filtered InGaAs, 0.01dB, Zero ref set

Germanium, 0.01dB, Zero/Set Ref

Filtered InGaAs, 0.01dB,Zero ref set

Single Instrument Pouch

00525

00526

00531

00532

00533

00534

02046

02038

2.5mm Universal Adapter

1.25mm Universal Adaptor

SC Adaptor for OPM

ST Adaptor for OPM

FC Adaptor for OPM

LC Adaptor for OPM

SC/APC Adapter for OPM

OptiTap Patchcord SC/APC for OPM

GAC 029

GAC 126

GAC 540

Kit Options:

Single Mode Kit

Kit includes:

1-GDLS 355 1310/1550 Dual Laser

1-GDLS 350 850/1300 Dual LED

1-GRP 460-02 Optical Power Meter

1-Soft Carry Case

Multimode Kit

Kit includes

1- GDLS 350 850/1300 Dual LED

1- GRP 460-02 Optical Power Meter

1- Soft Carry Case

Singlemode/Multimode Kit

Kit includes

1- GDLS 355 1310/1550 Dual Laser

1- GDLS 350 850/1300 Dual LED

1- GRP 460-02 Optical Power Meter

1- Soft Carry Case

GMFT-SM

03426

03429

03431

GMFT-MM

GMFT-SM-MM

TRUSTED

SINCE

1862

322

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Video Inspection Scope

• Unique external focus mechanism eliminates need for “focus wheel”

• 3/4 μm scratch resolution

• Thin (less than 1” dia.) ergonomic probe design

• Quick change adapter tips for all connector styles

• 3.5 inch LCD Display

• Advanced Li Ion Battery & smart technology AC charger system

• Rugged and compact size

SPECIFICATIONS

FOV (Field of View)

Resolution

630μm x 440μm

¾ micron

GVIS 300-USB

Light Source

Blue LED

Lighting Technique

Display screen size

Battery Life

Coaxial

3.5 in diagonal

8 to 10 hours continuous

3 hours

Battery charge time

Probe – 180mm x 25mm x 19mm

Monitor – 120mm x 89mm x 32mm

Size

Weight - (monitor, probe &

case)

0.54kg

Operating Temperature

0º to 50 ºC

-40ºC to 70 ºC

Storage Temperature

CAT. NO.

UPC NO. DESCRIPTION

GVIS 300 Monitor w/USB option, Probe, SC Bulkhead

and 2.5mm Universal Adaptor tips, battery charger,

basic cleaning kit and hard carry case

GVIS 300 MP-USB

00540

Video Inspection Scope

• Automatic PASS/FAIL analysis equipped to meet IEC 61300-3-35 USB or

Wi-Fi^®streaming. Easily connects with laptops, smart phones, and tablets

• Greenlee GVIS application for analysis and reporting

• Unique external focus system and enhanced magnification produce clear

high-definition images

SPECIFICATIONS

Live - 800μm x 600μm

FOV (Field of View)

Enlarge - 485μm x 365μm

Magnify and center - 485μm x 365μm

<1 micron

Resolution

Light Source

Lighting Technique

Size (Probe)

White LED

Coaxial

Probe – 180mm x 25mm x 19mm

Weight - (Probe(

102 g

Operating Temperature

Storage Temperature

0º to 50 ºC

-40ºC to 70 ºC

GVIS 400

CAT. NO.

UPC NO. DESCRIPTION

03178 GVIS 400 Probe Auto Pass/Fail with USB

GVIS 400-HDP

www.greenlee.com

323

COMMUNICATIONS

FIBER PRODUCTS

Video Inspection Scope

• Industry leading field of view

• Transmits live images and data via Wi-Fi from the GVIS 400-HDP via GPAD 250 USB

• PASS/FAIL via GPAD 250 conforming to IEC 61300-3-35

• Compatible with Greenlee inSpec and OpTest apps for Android

• Wireless transmission of dB loss readings from the GRP 460

SPECIFICATIONS

Dimensions

Weight

4.5”L x 1.5”W x 2.75”H (114 mm x 38 mm x 70 mm)

0.5 lbs (23 kg)

Wi-Fi Connectivity

Battery

802.11 abgn Wi-Fi Access Point

11.1 volt lithium ion, 4 hour battery life

AC Wall pack 12.6 volt lithium ion charger

200 feet / 61 meters (GPAD 250 to wireless device)

Battery Charger

Communication Distance

GPAD-250

CAT. NO.

UPC NO. DESCRIPTION

GPAD-250

03179

Wi-Fi Portable Access Device - For use with the GVIS-400 HDP

Video Inspection Scope Adapter Tips

CAT. NO.

UPC NO. DESCRIPTION

GAC 034B

GAC 040B

GAC 041B

GAC 042B

GAC 043B

GAC 044B

GAC 045B

GAC 046B

GAC 047B

GAC 048B

GAC 049B

GAC 050B

GAC 052B

GAC 104B

GAC 107B

GAC 109B

GAC 115B

GAC 116B

03180

03181

03182

03183

03184

03187

03188

03189

03192

03190

03191

03193

01896

03199

03202

03200

02050

02051

E2000 Adapter GVIS

SC Adapter GVIS

SC/APC Adapter GVIS

FC Adapter GVIS

FC/APC Adapter GVIS

LC Adapter GVIS

LC/APC Adapter GVIS

ST Adapter GVIS

MTP/APC Adapter GVIS

1.25mm Universal Adapter GVIS

2.5mm Universal Adapter GVIS

MTP Straight Adapter GVIS

OptiTap SC/APC Adapter for GVIS

FC Adapter, 60-Degree Angled GVIS

SC Adapter, 60-Degree Angled GVIS

LC Adapter, 60-Degree Angle GVIS

2.5mm APC Adapter for GVIS

1.25mm APC Adapter for GVIS

GAC 040B

GAC 044B

GAC 048B

TRUSTED

SINCE

1862

324

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

SensoLITE^®Light Detector

• Detects visible and invisible light wavelengths (630 nm to 1600 nm)

• Saves time and eliminates guesswork

• Simple, durable, and easy to use

• Works with bare and connectorized fibers

• Accepts all fiber and most connector types

• Wide sensitivity range: from -55 dBm to +25 dBm

• Presence of light indicated by an audible signal and an illuminated front

panel LED

• Unique design permits testing in bright ambient light conditions

• Long battery life—up to one year of normal use

• Low battery indicator

510XL

• Replaceable light blocking curtain

SPECIFICATIONS

OPTICAL

Center Wavelength

Detector

630 nm to 1600 nm

PIN-type germanium

Optical Interface

Direct connection to bare or connectorized fibers; No spe-

cialized adapters required

Promotes workplace safety – can help prevent accidental eye exposure

to hazardous laser radiation when used as directed

SPECIFICATIONS

Sensitivity

630nm

850nm

1300nm

< -40 dBm

< -55 dBm

ENVIRONMENTAL

Operating temperature -15° C to +55° C

1550nm

Storage temperature

Humidity

Dimensions

Weight

-25° C to +70° C

Output Indicators

Light > -40dBm

Battery test

Power Requirements

0 to 90% RH, non-condensing

14.2 x 4.3 x 3.3 cm (5.6 x 1.7 x 1.3 in.)

120 g (4.2 oz.) with batteries

Amber LED/audible signal

Green LED

Two AA size 1.5V batteries

(approx. 100 hours continuous operation)

CAT. NO.

UPC NO. DESCRIPTION

00024 Visual Fault Finder

510XL

www.greenlee.com

325

COMMUNICATIONS

FIBER PRODUCTS

Fiber Optic Power Meter

• Easy to use - three buttons control all functions

• Loss measurements in (dB); power measurements in (dBm).

• 0.01 dB measurement resolution

• Multi-wavelength storage - store and recall reference power levels

for faster, more efficient measurements

• Snap-On connector interface adapts to FC, SC and ST connectors.

• Long battery life

• User selectable auto shut-off

• Rugged and splash-proof

• Economically priced

CAT. NO.

UPC NO. DESCRIPTION

560XL

T1062

T1020

T1030

84485

60575

60576

60577

Fiber Optic Power Meter

SC/PC UCI Adapter

FC/PC SOC Adapter

ST/PC SOC Adapter

560XL

SPECIFICATIONS

OPTICAL

SPECIFICATIONS

Calibration Wavelengths

850 nm, 1300 nm,

1310 nm and 1550 nm

Environmental

Power Range

Accuracy

Linearity

+3 dBm to -60 dBm

0.25 dB

Operating temperature -15° C to +55° C

Storage temperature

Humidity

Dimensions

Weight

-35° C to +70° C

0 to 95% non-condensing

7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)

241 g (8.5 oz.)

+3dBm to -3dBm

-3dBm to -50dBm

-50dBm to -60dBm

0.5 dB

CE

EN61010; EN50081-1: 1992; EN55011,

Group 1, Class A EN50082-1:

1992 IEC 801-2, -3, -4

Resolution

Power Requirements

0.01 dB

Two AA size 1.5V batteries

(approx. 100 hours continuous operation)

Connector interface

FC, SC or ST SOC Adapter

Silicon Fiber Optic Power Meter

• Easy to use - three buttons control all functions

• Loss measurements in (dB); power measurements in (dBm)

• 0.01 dB measurement resolution

• Snap on connector interface adapts to FC, SC and ST connectors. Contact

Greenlee for other available adapters.

• Long battery life

• User selectable auto shut-off

• Rugged and splash-proof

• Economically priced

CAT. NO.

UPC NO. DESCRIPTION

00025

XL fiberTOOLS^®- Silicon Fiber Optic Power Meter

567XL

SPECIFICATIONS

OPTICAL

Detector Type

3 x 3.5 mm Silicon

635 nm, 780 nm, and 850 nm

+3 dBm to -60 dBm

0.ꢀ5 dB

+3 dBm to -3 dBm

-3 dBm to -50 dBm

-50 dBm to -60 dBm

0.01 dB

SPECIFICATIONS

Calibration Wavelengths

Power Range

Accuracy

Environmental

Operating temperature -15° C to +55° C

Storage temperature

Humidity

Dimensions

Weight

CE

Linearity at:

0.5 dꢁ

0.05 dꢁ

0.5 dꢁ

-35° C to +70° C

0 to 95% non-condensing

7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)

241 g (8.5 oz.)

EN61010; EN50081-1: 1992; EN55011,

Group 1, Class A EN50082-1:

1992 IEC 801-2, -3, -4

Resolution

Power Requirements

Two AA size 1.5V ꢁatteries

(approx. 100 hours continuous operation)

SOC

Connector Interface

TRUSTED

SINCE

1862

326

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

High Intensity Fiber Optic Power Meter

• Easy to use - three buttons control all functions

• Multi-Wavelength Storage: Store and recall reference power levels for

faster, more efficient measurements

• 0.01dB measurement resolution

• Loss measurements in (dB); power measurements in (dBm)

• Snap on connector interface adapts to FC, SC and ST connectors; Contact

Greenlee for other available adapters

• Long battery life

• User selectable auto shut-off

568XL

• Rugged and splash-proof

• Economically priced

CAT. NO.

UPC NO. DESCRIPTION

00026

XL fiberTOOLS^®- High Intensity Optic Power Meter

568XL

SPECIFICATIONS

OPTICAL

Detector Type

Calibration Wavelengths

Power Range

2 mm indium-arsenide (InGaAs)

980 nm, 1310 nm, and 1550 nm

+25 to -30 dBm (1310 nm and 1550 nm);

+25 to -27 dBm measurement range at 980 nm.

To avoid thermal damage, limit exsposure high

power (greater than +23 dBm) to less than

30 minutes.; +25 to -27 dBm (980 nm only)

SPECIFICATIONS

Environmental

Operating temperature -15° C to +55° C

Storage temperature

Humidity

Dimensions

Weight

-35° C to +70° C

0 to 95% non-condensing

7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)

241 g (8.5 oz.)

EN61010; EN50081-1: 1992; EN55011,

Group 1, Class A EN50082-1:

1992 IEC 801-2, -3, -4

Linearity at:

+25 dBm to +22 dBm

+22 dBm to +18 dBm

+18 dBm to +10 dBm

+10 dBm to -30 dBm

1.0 dB

0.5 dB

0.2 dB

0.05 dB

(1310nm and 1550nm)

CE

Absolute Accuracy

Wavelength Dependence

0.25dB at calibration conditions

975 to 985 nm

1270 to 1330 nm

1500 to 1625 nm

0.025 dB/nm

0.0033 dB/nm

0.0016 dB/nm

Polarization Dependence

Resolution

<0.1 dB

0.01 dB

Power Requirements

Two AA size 1.5V batteries

(approx. 100 hours continuous operation)

SOC

Connector Interface

www.greenlee.com

327

COMMUNICATIONS

FIBER PRODUCTS

850/1300 nm LED Source

• 850/1300 nm wavelengths

• Stable calibrated output

• Easy to use

• Continuous wave and modulated output

• Fixed connector interface FC, SC or ST

• Long battery life - approx. 80 hours

• User selectable auto shut-off

• Rugged and splash-proof

• Economically priced

CAT. NO.

UPC NO. DESCRIPTION

570XL-FC

570XL-SC

570XL-ST

84486

84487

84488

850/1300 nm LED source w/FC interface

850/1300 nm LED source w/SC interface

850/1300 nm LED source w/ST interface

570XL-FC

SPECIFICATIONS

OPTICAL

Center Wavelengths

Range (typical)

Max. spectral width

Stability (1 hour)

Typical power output

100/140um

62.5/125um

50/125um

Modulation frequency

Power Requirements

850 nm

840 nm to 880 nm

60 nm

1300 nm

1270 nm to 1345 nm

150 nm

SPECIFICATIONS

ENVIRONMENTAL

0.05 dB

Operating temperature -15° C to +55° C

Storage temperature

Humidity

Dimensions

Weight

CE

-35° C to +70° C

-20 dBm

-21 dBm

-121dBm

270 kHz, 1 kHz and 2 kHz

-20 dBm

-21 dBm

270 kHz, 1 kHz and 2 kHz

0 to 95% non-condensing

7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)

241 g (8.5 oz.)

EN61010; EN50081-1: 1992; EN55011,

Group 1, Class A EN50082-1:

1992 IEC 801-2, -3, -4

Two AA size 1.5V batteries

(approx. 40 hours continuous operation)

Connector interface

FC, SC or ST

650 nm LED Source for Large Core Plastic and Glass Fiber

• 650 nm wavelength

• Stable calibrated output

• Easy to use

• Continuous wave and modulated output

• ST connector interface

• Long battery life - approx. 24 hours

• User selectable auto shut-off

• Rugged and splash-proof

• Economically priced

CAT. NO.

UPC NO. DESCRIPTION

573XL-ST

573XL-UNIV

00023

00598

650NM LED source w/ST interface

650NM LED source w/UCI interface

573XL-ST

SPECIFICATIONS

OPTICAL

Center Wavelength

Range (Typical)

Max. Spectral Width (FWHM)

650 nm

630 nm to 670 nm

40 nm

SPECIFICATIONS

ENVIRONMENTAL

Stability (1 hour)

0.05 dB

Operating temperature -15° C to +55° C

Power Output into

MM 200/300 SI Fiber

Modular Frequencies

Power Requirements

-15 dBm 0.5 dB

Storage temperature

Humidity

Dimensions

Weight

-35° C to +70° C

0 to 95% non-condensing

7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)

241 g (8.5 oz.)

EN61010; EN50081-1: 1992; EN55011,

Group 1, Class A EN50082-1:

1992 IEC 801-2, -3, -4

270 kHz, 1 kHz and 2 kHz 0.5 dB

Two AA size 1.5V batteries

(approx. 24 hours continuous operation)

ST

CE

Connector Interface

TRUSTED

SINCE

1862

328

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

850 nm LED Source with AS-100 Launch Condition using 100/140 Fiber

• 850 nm wavelength

• Stable calibrated output

• Easy to use

• Continuous wave and modulated output

• Universal connector interface

• Long battery life - approx. 24 hours

• User selectable auto shut-off

• Rugged and splash-proof

• Economically priced

CAT. NO.

UPC NO. DESCRIPTION

577XL AS100

APC-108

ATS-108

00029

60572

60573

60574

850 nm LED source w/AS100 Launch

FC/PC UCI Adapter

ST/PC UCI Adapter

SC/PC UCI Adapter

577XL AS100

ASC-108

SPECIFICATIONS

OPTICAL

Center Wavelength

Range (Typical)

SPECIFICATIONS

850 nm

ENVIRONMENTAL

840 nm to 880 nm

<55 nm

0ꢀ05 ꢁd

Max. Spectral Width (FWHM)

Stability (1 hour)

Launch Profile

Operating temperature -15° C to +55° C

Storage temperature

Humidity

Dimensions

Weight

-35° C to +70° C

AS100

0 to 95% non-condensing

7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)

241 g (8.5 oz.)

Power Output into MM 100/140 -13 ꢁdm 0ꢀ5 ꢁd

GI fiber

Modular Frequencies

Power Requirements

270 kHz, 1 kHz anꢁ 2 kHz 5ꢂ

Two AA size 1ꢀ5V batteries

(approxꢀ 24 hours continuous operation)

Universal connector interface, physical contact (UCI-PC)

CE

EN61010; EN50081-1: 1992; EN55011,

Group 1, Class A EN50082-1:

1992 IEC 801-2, -3, -4

Connector Interface

1300 nm LED Source with M90 Launch Condition using 62.5/1.25 Fiber

• 850 nm wavelength

SPECIFICATIONS

• Stable calibrated output

• Easy to use

ENVIRONMENTAL

• Continuous wave and modulated output

• Universal connector interface

• Long battery life - approx. 24 hours

• User selectable auto shut-off

• Rugged and splash-proof

• Economically priced

Operating temperature -15° C to +55° C

Storage temperature

Humidity

Dimensions

Weight

-35° C to +70° C

0 to 95% non-condensing

7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)

241g (8.5 oz.)

CE

EN61010; EN50081-1: 1992;

EN55011,

CAT. NO.

UPC NO. DESCRIPTION

Group 1, Class A EN50082-1:

1992 IEC 801-2, -3, -4

578XL-M90

APC-108

ATS-108

00753

60572

60573

60574

LED Source 1300 NM, 62.5/1.25 Fiber

FC/PC UCI Adapter

ST/PC UCI Adapter

SC/PC UCI Adapter

SPECIFICATIONS

ASC-108

OPTICAL

Center Wavelength

Range (Typical)

Max. Spectral Width (FWHM)

Stability (1 hour)

Launch Profile

1300 nm

150 nm

<55 nm

0.05 dB

M90

Power Output into MM 62.5/125 -20 dBm

GI fiber

Modular Frequencies

Power Requirements

270 kHz, 1 kHz and 2 kHz 5%

Two AA size 1.5V batteries

(approx. 24 hours continuous

operation)

Connector Interface

Universal connector interface,

physical contact (UCI-PC)

www.greenlee.com

329

COMMUNICATIONS

FIBER PRODUCTS

1310/1550 nm Laser Source

• 1310/1550nm wavelengths

• Stable calibrated output

• Easy to use

• Continuous wave and modulated output

• Fixed connect interface FC, SC or ST

• Long battery life - approx. 80 hours

• User selectable auto shut-off

• Rugged and splash-proof

• Economically priced

CAT. NO.

UPC NO. DESCRIPTION

580XL-FC

580XL-SC

580XL-ST

84489

84490

84491

1310/1550nm Laser source w/FC interface

1310/1550nm Laser source w/SC interface

1310/1550nm Laser source w/ST interface

580XL-FC

SPECIFICATIONS

OPTICAL

Center Wavelengths

Range (typical)

Max. spectral width

Stability (1 hour)

Typical power output (9/125)

Minimum

1310 nm

1280 nm to 1340 nm

<5 nm

1550 nm

1520 nm to 1580 nm

<5 nm

SPECIFICATIONS

ENVIRONMENTAL

0.05 dB

Operating temperature -15° C to +55° C

Storage temperature

Humidity

Dimensions

Weight

-35° C to +70° C

-8 dBm

-7 dBm

270 kHz, 1 kHz and 2 kHz

-8 dBm

-7 dBm

270 kHz, 1 kHz and 2 kHz

0 to 95% non-condensing

7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)

241 g (8.5 oz.)

Typical

Modulation frequency

Two AA size 1.5V batteries

Power Requirements

CE

EN61010; EN50081-1: 1992; EN55011,

Group 1, Class A EN50082-1:

1992 IEC 801-2, -3, -4

Class 1

(approx. 40 hours continuous operation)

Connector interface

FC, SC or ST

CDRH Laser Class

Multimode Fiber Optic Test Set

• Insertion loss test set for multimode fiber

• 850/1300 nm loss measurements

• Connector for FC, SC or ST

• Rugged package design

• Easy to use portable package

• Economically priced

SPECIFICATIONS

5670-FC INCLUDES:

560XL Optical Power Meter

570XL-FC 850/1300 nm LED Source w/FC Connector

T1020 FC/PC SOC Adapter

914B Carrying Case

5670-SC INCLUDES:

560XL Optical Power Meter

570XL-SC 850/1300 nm LED Source w/SC Connector

SC/PC SOC Adapter

5670-FL

914B Carrying Case

5670-ST INCLUDES:

560XL Optical Power Meter

570XL-ST 850/1300 nm LED Source w/ST Connector

T1030 ST/PC SOC Adapter

914B Carrying Case

CAT. NO.

UPC NO. DESCRIPTION

5670-FC

5670-SC

5670-ST

84492

84493

84494

Multimode Fiber Optic Test Set w/FC interface

Multimode Fiber Optic Test Set w/SC interface

Multimode Fiber Optic Test Set w/ST interface

TRUSTED

SINCE

1862

330

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Singlemode Fiber Optic Test Set

• Insertion loss test set for singlemode fiber

• 1310/1550 nm loss measurements

• Connector for FC, SC or ST

• Rugged package design

• Easy to use portable package

• Economically priced

KIT SPECIFICATIONS

5680-FC INCLUDES:

560XL Optical Power Meter

580XL-FC 1310/1550 nm Laser Source w/FC Connector

T1020 FC/PC SOC Adapter

914B Carrying Case

5680-SC INCLUDES:

5680-FC

560XL Optical Power Meter

580XL-SC 1310/1550 nm Laser Source w/SC Connector

T1062 SC/PC SOC Adapter

914B Carrying Case

5680-ST INCLUDES:

CAT. NO.

UPC NO. DESCRIPTION

560XL Optical Power Meter

580XL-ST 1310/1550 nm Laser Source w/ST Connector

T1030 ST/PC SOC Adapter

914B Carrying Case

5680-FC

5680-SC

5680-ST

84495

84496

84497

Singlemode Fiber Optic Test Set w/FC interface

Singlemode Fiber Optic Test Set w/SC interface

Singlemode Fiber Optic Test Set w/ST interface

Multimode and Singlemode Fiber Optic Test Set

• Insertion loss test set for multimode and singlemode fiber

• 850/1300 nm Loss measurements

• 1310/1550 nm Loss measurements

• Connector for FC, SC or ST

• Rugged package design

• Easy to use portable package

• Economically priced

KIT SPECIFICATIONS

5890-FC INCLUDES:

560XL Optical Power Meter

570XL-FC 850/1300 nm LED Source w/FC Connector

580XL-FC 1310/1550 nm Laser Source w/FC Connector

T1020 FC/PC SOC Adapter

915B Carrying Case

5890-SC INCLUDES:

560XL Optical Power Meter

570XL-SC 850/1300 nm LED Source w/SC Connector

580XL-SC 1310/1550 nm Laser Source w/SC Connector

T1062 SC/PC SOC Adapter

5890-FC

915B Carrying Case

5890-ST INCLUDES:

560XL Optical Power Meter

570XL-ST 850/1300 nm LED Source w/ST Connector

580XL-ST 1310/1550 nm Laser Source w/ST Connector

T1030 ST/PC SOC Adapter

915B Carrying Case

CAT. NO.

UPC NO. DESCRIPTION

5890-FC

5890-SC

5890-ST

84498

84499

84500

Multimode and Singlemode Fiber Optic Test Set w/FC interface

Multimode and Singlemode Fiber Optic Test Set w/SC interface

Multimode and Singlemode Fiber Optic Test Set w/ST interface

www.greenlee.com

331

COMMUNICATIONS

FIBER PRODUCTS

525N-30 Smart Optical Loss Test Set

• Automated dual cable testing

• Optical return loss measurements

• Dual wavelength insertion loss measurements

• Multi-mode and Single-mode models feature user settable

PASS/FAIL thresholds

525N-30-FC

• Communications between units via messaging

• Wide dynamic range optical power meter

• Test record storage and data management software

• Rugged outside plant instrument package

• Universal connector interface

CAT. NO.

UPC NO. DESCRIPTION

525N-30-FC

525N-30-SC

525N-30-ST

00891

00892

00893

850/1300nm Smart Optical Loss Test Set - FC interface

850/1300nm Smart Optical Loss Test Set - SC interface

850/1300nm Smart Optical Loss Test Set - ST interface

SPECIFICATIONS

525N-30-XX

Instrument Type

Singlemode Smart Loss Test Set

Interface

PC Connector Interface AUTOTEST

Connector

AUTOTEST

measurements

performs

Insertion Loss Test and Manual Return

Loss

POWER METER

Detector Type

Display Range

InGaAs

+10 dBm to -70 dBm

Calibrated Wavelengths

Absolute Accuracy

Resolution

850, 980, 1300, 1310, 1550, 1480, 1625 nm

< 0.25 dB

0.01 dB

Measurement Units

dBm, dB

SOURCE SPECIFICATIONS

850 nm 30 nm

<170

>-21 dBm

< 0.10 dB/8 hrs

1300 nm 30 nm

<170

>-21 dBm

Center Wavelength

Spectral Width

Output Power

< 0.10 dB/8 hrs

Output Stability

AUTOTEST INSERTION LOSS SPECIFICATIONS

Test Port Measurement Range

Calibrated Wavelengths

25 dB

850, 1300 nm

GENERAL DESCRIPTIONS

Display Type

Fiber Type

Graphics Liquid Crystal with Backlight

Singlemode 9/125 um

Standard Adapter Type

Laser Classification

Operating Temperature

Storage Temperature

FC, SC, ST other adapter options available

Class 1 CFR 1040

0° C to +50° C

-20° C to +60° C

Relative Humidity

Size

Weight

0 to 95% RH non-condensing

19.3 x 10.9 x 5.8 cm (7.6 x 4.3 x 2.3 in)

1.0 kg (2.2 lbs)

Power

Battery Life

Internal rechargeable NiMH

>8 hours

TRUSTED

SINCE

1862

332

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

525N-60 Smart Optical Loss Test Set

• Automated bi-directional testing

• Optical return loss measurements

• Dual wavelength insertion loss measurements

• Multi-mode and single-mode models feature user settable

PASS/FAIL thresholds

• Communications between units via messaging

• Wide dynamic range optical power meter

• Test record storage and data management software

• Rugged outside plant instrument package

• Universal connector interface

CAT. NO.

UPC NO. DESCRIPTION

00896

00894

00895

1310/1550 nm Smart Optical Loss Test Set - PC Connectors

525N-60-ST

525N-60-FC

525N-60-SC

525N-60-ST

SPECIFICATIONS

525N-60-XX

Instrument Type

Singlemode Smart Loss Test Set

Interface

PC Connector Interface AUTOTEST

Connector

AUTOTEST

measurements

performs

Insertion Loss Test and Manual Return

Loss

POWER METER SPECIFICATIONS

Detector Type

InGaAs

Display Range

+10 dBm to -70 dBm

Calibrated Wavelengths

Absolute Accuracy

Resolution

850, 980, 1300, 1310, 1550, 1480, 1625

0.25 dB

0.01 dB

Measurement Units

Adapter Type

dBm, dB, W

UCI-UPC flat polish adapter 9/125SM

SOURCE SPECIFICATIONS

Center Wavelength

Spectral Width

Output Power

1310 nm 30 nm 1550 nm 30 nm

<5

>-10 dBm

0.15 dB

8 hours

>-10 dBm

0.15 dB

8 hours

Output Stability

AUTOTEST INSERTION LOSS SPECIFICATIONS

Test Port Measurement Range

Calibrated Wavelengths

40 dB

1310, 1550 nm

RETURN LOSS SPECIFICATIONS

Measurement Range

Accuracy

10 to 45 dB

.5 dB

GENERAL DESCRIPTIONS

Display Type

Fiber Type

Standard Adapter Type

Graphics Liquid Crystal with Backlight

Singlemode 9/125 um

FC, SC, ST other adapter

options available

Laser Classification

Operating Temperature

Storage Temperature

Class 1 CFR 1040

0° C to +50° C

-20° C to +60° C

Relative Humidity

Size

0 to 95% RH non-condensing

19.3 x 10.9 x 5.8 cm

(7.6 x 4.3 x 2.3 in)

Weight

1.0 kg (2.2 lbs)

Power

Battery Life

Internal rechargeable NiMH

>8 hours

www.greenlee.com

333

COMMUNICATIONS

FIBER PRODUCTS

Connector Cleaning Systems

• Special lint-free fabric-on-a-reel quickly cleans ferrule endfaces of dust,

oil and other contaminants

• Cleaning system is completely self-contained

• No need for alcohol

• A single cleaning reel can be used for over 400 ferrule cleanings

• ReelCleaner^™can be used on all connector types including

MTP and MT-RJ

948

CAT. NO.

UPC NO. DESCRIPTION

948

948/2

945/ESD/1

60692

10792

24053

ReelCleaner^™Connector Cleaning System

Reel Set, 2/Package

Reel Set, 1/Package

Adapter Cleaning Wands

• Specially-created, lint-free materials clean hard-to-reach fiber optic

interfaces, bulkhead adapters and ferrule alignment sleeves

CAT. NO. UPC NO. DESCRIPTION

946

946/K

947

60571

60689

60690

60691

2.5 mm Cleaning Wands, 10/Package

2.5 mm Cleaning Wands, 200/Box

1.25 mm Cleaning Wands, 10/Package

1.25 mm Cleaning Wands, 200/Box

946

947/K

TRUSTED

SINCE

1862

334

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Optical Fiber Monitors

OFM1020

• mm Resolution

• Zero Deadzone

• 90dB Return loss dynamic range

• 850/1300 nm operation

• Measure optical components, cables and sensors.

• Monitor bend loss and fiber stress

• Universal optical interface

• Ruggedized for field deployment

• AC/DC operation

• Custom configurations available (fiber, outputs, wavelengths)

OFM1020

OFM130

• mm Resolution

• Zero Deadzone

• 85dB Return loss dynamic range

• 1310/1490/1550/1625 nm operation

• Measure optical components, cables and sensors

• Analyze optical amplifiers

• Monitor bend loss and fiber stress

• Custom configurations available (fiber, outputs, wavelengths)

CAT. NO.

UPC NO.

DESCRIPTION

Please consult with a customer service representative

for ordering details. (800) 642-2155

OFM130

SPECIFICATIONS

Fiber Type

Distance

Range

OFM1020

0-20 km (65,000 ft.)

OFM130

Accuracy

0.02% + 2.5cm (1")

5 mm (0.2")

Single Point Resolution

Two Point Resolution

Deadzone

10 cm (4")

Event

Attenuation

12 cm typical (5")

38 cm typical (15")

Return Loss

Dynamic Range

Accuracy

90dB

1.0dB

Insertion loss, fresnel

Dynamic Range

Accuracy

40dB

0.3dB

Insertion loss, rayleigh

Dynamic Range

Accuracy

20dB

0.02 dB

Wavelength

Accuracy

40 nm

20 nm

Spectral Width

Mechanical

Size

36 cm x 48 cm x 20 cm 35 cm x 39 cm x 20 cm

(14.2"x18.9"x7.9")

11 kg (24 lb.)

(13.8"x15.3"x7.9")

9.5 kg (21 lb.)

Weight

Power

AC

110/220V, 60/400Hz

DC

24V

n/a

www.greenlee.com

335

COMMUNICATIONS

FIBER PRODUCTS

Fiber Optic Instrument Adapters – SOC and UCI

• Our SOC and UCI adapters provide direct connectivity for

Tempo fiberTOOLS^®to a wide range of industry-standard fiber

optic connectors

• Adapter design ensures maximum accuracy and repeatability

when performing critical measurements on fiber optic systems

• Easy to clean and use

• SOC adapters are compatible with both PC and Angled APC

physical contact interfaces

• UCI adapters feature durable phosphor bronze alignment sleeve

• SOC (Snap-On Connector) adapter is used on all power meters

and 250 “B” series LED Sources

• UCI (Universal Connector Interface) adapter is used on all 250/260

“A” Series Sources and 330 Series Variable Optical Attenuators

• Single-mode and multimode compatible

Fiber Optic Instrument Adapters – SOC and UCI

CONNECTOR TYPE

DESCRIPTION

SOC ADAPTER

UCI ADAPTER

CAT. NO.

UPC NO.

CAT. NO.

UPC NO.

1.25 mm Quick-Connect Universal Adapter

(LC, MU, etc.)

T1026

60588

Use Hybrid Cable Only *

2.5 mm SOC Quick-Connect Adapter

(E2000, FC, SC, ST, etc.)

T1025

T10E2

T1020

T1040

T10LC

T1038

T13A2

T1062

T1087

T1030

T10TB

T10ZP

60587

60599

60576

60590

60600

60589

60605

60575

60596

60577

60602

60604

AU-250

AE2-10

60703

60698

60572

60699

E-2000

FC

APC-108

HMS-10/HP

AHP-10

LC

Use Hybrid Cable * or FoPro^®_x

Use Hybrid Cable Only *

ASC-108

MIL-T-29504/4 & /5 Termini

MT-RJ

SC

60574

60702

60573

SMA 905/906

ST

ASM-90

ATS-108

TOSLINK – Simplex

Versatile Link – V/Z PIN

Use Hybrid Cable Only *

Use Hybrid Cable Only*

x

FoPro ferrule options include 2.5 mm, 1.57 mm (MIL-style 16AWG optical contacts) and 1.25 mm.

When using a Hybrid Adapter Cable, the instrument UCI adapter and one end of the Hybrid

Adapter Cable should be a commonly available connector type. (i.e. FC, SC or ST)

90SOC (60687)

SOC adapter tool for

*

easy installation and

removal of SOC adapters

from instrument interfaces.

(Product shown may vary)

TRUSTED

SINCE

1862

336

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

FIBER OPTIC HAND TOOLS

ProGrip 5-in-1 Fiber Optic Stripper

• Precision ground stripping cavities for:

– 2.0 - 2.4 mm outer jacket

– 2.0 - 3.0 mm loose tube

– 2.8 - 3.0 mm outer jacket

– 900 µm buffer insulation

– 900/125 µm and 250/125 µm buffer/acrylate

• Factory calibrated

PA1171

CAT. NO.

DESCRIPTION

PA1171

ProGrip 5-in-1 Fiber Optic Stripper

ProGrip 3-in-1 Fiber Optic Stripper

• Precision ground stripping cavities for:

– 2.0 mm outer jacket

– 900 µm buffer insulation

– 250 µm buffer/acrylate

• Factory calibrated

CAT. NO.

DESCRIPTION

PA1177

ProGrip 3-in-1 Fiber Optic Stripper

Economy Kevlar^®Cutter

• Cut protective Kevlar strands in fiber optic cable

• Hard-chromed serrated edges to easily cut through Kevlar

• Comfortable handles with large finger openings

• 7.75" (197 mm) long

CAT. NO.

DESCRIPTION

WEIGHT

PA1511

Economy Kevlar Cutter

2 oz

Kevlar is a registered trademark of E.I. Dupont, Inc.

PA1511

Economy Fiber Optic Stripper

• Pre-calibrated and factory set to ensure precision

• Bright orange rubber dipped handles

• Lock closure for safety and transport

• Tool is for stripping 2.0-3.0 mm Fiber Optic cable, micron-cladded core

• 5" (127 mm) long

PA1162

SPECIFICATIONS

3 oz. (86 g)

5" (127 mm)

Weight

Length

CAT. NO.

DESCRIPTION

WEIGHT

PA1162

Economy Fiber Optic Stripper

3 oz

www.greenlee.com

337

COMMUNICATIONS

FIBER PRODUCTS

Pocket Cable Stripper

• Specifically designed for stripping power and telecommunications

cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm)

• Strips solid conductor, stranded conductor and multiple

conductor cables

• Easy blade depth adjustment

• Blade rotates for circular, longitudinal and spiral cuts.

1903

CAT. NO.

UPC NO.

DESCRIPTION

1903

12679

13544

13545

13546

Cable Stripping Tool

13544

13545

13546

Replacement Blade (2 per package)

Replacement Small Hook

Replacement Large Hook

Fiber Optic Scribe

• Pen-type scribe with screw-in non-reversible carbide tip

• Wedge shaped tip

• Pocket-clip

• Stainless steel barrel

• 5.25" (197 mm)

CAT. NO.

DESCRIPTION

WEIGHT

PA1922-1

Fiber Optic Scribe

2 oz

PA1922-1

Fiber Optic Polishing Pucks

• Manufactured from aluminum with tungsten coating

• Cleaner than conventional plastic pucks because less debris left behind

• Double the lifetime of conventional plastic pucks

• Length: 7.75" (197 mm)

CAT. NO.

DESCRIPTION

WEIGHT

PA1920-1

PA1926-1

SC, ST, FC Polishing Puck

LC Polishing Puck

2 oz

PA1920-1

TRUSTED

SINCE

1862

338

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

FIBER OPTIC KITS

Ultimate Fiber Tool Kit

This Ultimate Kit contains all the slitters, strippers, and Kevlar^®cutters you

will need to start your fiber optic terminations. Also included is the premium

1600 Series Crimper with three interchangeable dies. The Ultimate Tool Bag

also has plenty of room for you to add your consumables

PA4924

CAT. NO.

DESCRIPTION

WEIGHT

PA4924

Ultimate Fiber Tool Kit

5.65 lbs

ULTIMATE FIBER TOOL KIT INCLUDES

PA1511

PA1171

PA1162

PA1161

PA1820

PA1821

PA1258

PA1600

PA2044

PA2664

PA1922-1

PA1920-1

PA1926-1

N/A

Kevlar^®Cutter

ProGrip 5-in-1 Fiber Optic Stripper

Economy Fiber Optic Stripper

Adjustable Jacket Stripper

AM 25 Slitter

AM 35 Slitter

LC CST- Mini Stripper

1600 Series Crimp Frame

STII Type Die Set

SMA/SMB/FC/BICONIC Die Set

Fiber Optic Scribe

SC/ST/FC Polishing Puck

LC Polishing Puck

Plano^®Tackle Box

PA4923

Ultimate Tool Bag

Kevlar is a registered trademark of E.I. Dupont, Inc.

FiberReady Tool Kit

This kit contains an assortment of cable sliters, strippers and Kevlar^®

cutters to prep fiber optic cable along with our 1600 Series premium

crimper with interchangeable dies

CAT. NO.

DESCRIPTION

WEIGHT

PA906001 FiberReady Tool Kit

3.1 lbs

PA906001

FIBERREADY TOOL KIT INCLUDES

PA1511

PA1171

PA1822

PA1600

PA2044

PA2664

N/A

Kevlar^®Cutter

ProGrip 5-in-1 Fiber Optic Stripper

Universal Cable Stripper

1600 Series Crimp Frame

STII Type Die Set

SMA/SMB/FC/BICONIC Die Set

Zippered Portfolio Case with Handles

Kevlar is a registered trademark of E.I. Dupont, Inc.

www.greenlee.com

339

COMMUNICATIONS

COMMUNICATIONS KITS

GripPack Quick-Release Tool Holster

• Easy-on, easy off with new quick-release belt clip

• Belt clip swivels so the holster moves with you and the

tools stay out of your way

• Form fitted PVC material ensures that tools don’t fall out -

even if you drop your kit or they are upside down

• Molded specifically to hold the following Greenlee Communications Tools:

Data SureStrip^®UTP/STP & flat satin phone cutter/stripper, Datacomm

scissors with serrated blades & ergonomic handles, Punchdown tool - either

the ergonomic SurePunch Pro or the original SurePunch PDT^®, Mini-

MagLite^®or SurePunch Pro detachable LED, and a Sharpie^®marker

CAT. NO.

DESCRIPTION

PA4942

PA4940

PA4941

PA4942

PA4943

PA4946

GripPack Quick-Release Tool Holster

GripPack SurePunch Pro Technician's Kit

GripPack SurePunch Pro Installer's Kit

GripPack SurePunch Technician's Kit

GripPack UTP Essentials

PA4940-31 Replacement Belt Clip

Grip Pack Kits

DESCRIPTION

MODEL

PA4941

PA4942

PA4943

PA4946

GripPack Tool Holster

PA4940

✓

Data SureStrip^®UTP/STP & flat satin cutter/stripper

PA1116

PA4571

PA3589

PA3570

PA4599

N/A

✓

Reversible 110/66 blade

SurePunch Pro PDT punchdown tool handle

SurePunch PDT^®punchdown tool handle

SurePunch Pro detachable LED light & batteries

MagLite^®with 2 AA batteries

✓

Black Sharpie^®pen

N/A

Pro COAX Tool Kit

Designed for the professional CATV cable installer. Offers the convenience

in having six essential tools needed for coaxial repair and installation with

a unique Grip Pack Pouch

46601

CAT. NO.

UPS NO.

DESCRIPTION

46601

01292

Pro COAX Tool Kit

46601 PRO COAX TOOL KIT INCLUDES

0251-08D

45591

8" Diagonal Cutting Pliers, Dipped Grip

RG59/6/6Q, RG7/11 Coaxial Cable Stripper

RG59/6/6Q, RG7/11 Coaxial Cable Crimper

6-in-1 Multi-Tool (Screwdriver/Nut Driver Tool)

Combo Ratcheting Closed and Open Ended 7/16" Wrench

LED Water Resistant Penlight

PA70020

0153-42C

0354-14

FL2AAAP

PA5000

Custom Grip Pack Pouch with Belt Clip

TRUSTED

SINCE

1862

340

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Ultimate Technician Kit

CAT. NO.

DESCRIPTION

WEIGHT

PA4932

Ultimate Technician Kit

7.2 lbs

PA4932 ULTIMATE TECHNICIAN KIT INCLUDES

PA1179

PA1116

PA1257

PA1923

PA1927

PA1559

PA3589

PA4599

PA4572

PA4591

PA4573

PA4574

PA4575

PA1543

PA1573

PA1902

PA1900

N/A

KT8 round cable cutter

Data SureStrip^®UTP/STP & flat satin cutter/stripper

LC-CST CATV “F” coax stripper

Untwist tool

CATV “F” flaring & attachment tool - RG6/RG6 QS

SealTite^®Pro compression crimper

SurePunch Pro punchdown tool

SurePunch Pro detachable LED light

110 blade

Double 110 blade

66 blade

BIX blade

Krone LSA blade

LAN ProNavigator^®tester & remote

Telephone Test Set & LAN Cable-Check^™

RJ45 adapter

Can wrench

(10) RJ22 handset plugs

PA4932

PA9520

PA9546

PA9644

PA901074

PA4923

N/A

(10) RJ11/12 plugs, stranded, flat cable

(10) RJ45 plugs, Cat5e, solid, round cable

(10) CATV “F” RG6/RG6 QS connectors

(2) BNC-to-CATV “F” adapters

Ultimate Tool Bag

Plano^®plastic tackle box

Ultimate Premise Service Kit

This kit is designed for today’s on-the-go LAN professional. It provides

all the tools and testers you need to maintain your data, voice and video

networks all in our Ultimate Tool Bag that’s always ready

CAT. NO.

DESCRIPTION

WEIGHT

PA4933

Ultimate Premise Service Kit

6.1 lbs

PA4932 ULTIMATE PREMISE SERVICE KIT INCLUDES

PA1179

PA1116

PA1257

PA8000

PA3589

PA4572

PA4573

PA1543

PA1573

PA1902

PA901074

PA4923

N/A

KT8 round cable cutter

Data SureStrip^®UTP/STP & flat satin cutter/stripper

LC-CST CATV “F” coax stripper

CrimpALL^®crimp frame with EZI-CHANGE^™thumb screws

SurePunch Pro punchdown tool

110 blade

66 blade

LAN ProNavigator^®tester & remote

Telephone Test Set & LAN Cable-Check^™

RJ45 adapter

PA4933

(2) BNC-to-CATV “F” adapters

Ultimate Tool Bag

Plano^®plastic tackle box

Die Sets:

PA2062

PA2687

Die Sets: RJ11/12 WE/SS-style

Die Sets: RJ45 WE/SS-style&RG6/RG6 QS CATV“F”

www.greenlee.com

341

COMMUNICATIONS

COMMUNICATIONS KITS

Ultimate Coax Compression Tool Kit

This kit is for installing home theaters, HDTV, satellite and digital

cable TV systems. It contains everything needed for new home

construction or retrofitting sophisticated A/V solutions

CAT. NO.

DESCRIPTION

WEIGHT

PA4939

Ultimate Coax Compression Tool Kit

8.25 lbs

PA4939 ULTIMATE COAX COMPRESSION TOOL PRO KIT INCLUDES

PA1821

PA1179

PA1119

PA1280

PA2280

PA2281

PA2282

PA2283

PA2284

PA1927

PA1557

PA1907

PA1908

PA1594

N/A

AM 35 Slitter

KT8 Cutter

UTP/Coax Cutter/Stripper

CST Pro Coax tool

CST Pro GRN Cassette

CST Pro OG – Kings & Amphenol BNC

CST Pro BK – ADC, Amphenol HDTV BNC

CST Pro BL – CATV “F”

CST Pro Rollers

CATV “F” Flaring & Insertion Tool

SealTite^®Pro Compression Crimper

BNC Extraction Tool

CATV “F” Extraction Tool

LAN & A/V Cable-Check^™Tester

Plano^®Tackle Box

PA4939

PA4923

PA9645

PA9720

PA9730

PA906002

Ultimate Tool Bag

(50) SealTite^™CATV “F” – RG59

(10) SealTite^™RCA – RGX

(10) SealTite^™BNC – RGX

(30) Connector & Adapter Assortment Pack

Ultimate DataReady^®Pro Kit

If you’re an installer or technician needing a data cable tool kit solution,

this is it. It includes all the tools you need for Cat5, Cat5e and Cat6

installation or maintenance in our rugged Ultimate Tool Bag

CAT. NO.

PA4934

DESCRIPTION

Ultimate DataReady^®Pro Kit

WEIGHT

5.15 lbs

PA4932 ULTIMATE DATAREADY^®PRO KIT INCLUDES

PA1116

PA1923

PA8000

PA3589

PA4599

PA4571

PA4591

PA1543

PA4923

N/A

Data SureStrip^®UTP/STP & flat satin cutter/stripper

Untwist tool

CrimpALL^®crimp frame with EZI-CHANGE^™thumb screws

SurePunch Pro punchdown tool

SurePunch Pro detachable LED light

110/ 66 blade

PA4934

Double 110 blade

LAN ProNavigator^®tester & remote

Ultimate Tool Bag

Plano^®plastic tackle box

Die Sets:

PA2061

PA2062

PA2063

PA2064

PA2067

RJ45 WE/SS-style

RJ11/12 WE/SS-style

RJ22 handset

RJ45 AMP-style

RJ11 DEC-MMJ

TRUSTED

SINCE

1862

342

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Ultimate Data/Voice Pro Kit

This complete kit is for data and voice installation and maintenance

stored in the new versatile Ultimate Tool Bag

CAT. NO.

DESCRIPTION

WEIGHT

PA4935

Ultimate Data/Voice Pro Kit

4.5 lbs

PA4935 ULTIMATE DATA/VOICE PRO KIT INCLUDES

PA1116

PA1923

PA1561

PA3589

PA4572

PA4573

PA4591

PA1573

PA1900

PA4923

N/A

Data SureStrip^®UTP/STP & flat satin cutter/stripper

Untwist tool

All-in-One Phone/Data tool

SurePunch Pro punchdown tool

110 blade

66 blade

Double 110 blade

Telephone Test Set & LAN Cable-Check^™

Can wrench

PA4935

Ultimate Tool Bag

Plano^®plastic tackle box

Ultimate Tool Bag

• Main compartment features removable inner tote and three additional pockets

• Removable inner tote with eight adjustable storage slots keeps

smaller tools handy

• Detachable shoulder strap with three anchor points to carry bag horizontally

or vertically

• Deep Velcro pockets holds large tools or test equipment

• Plano^®divided tackle box neatly stores dies, blades & connectors

and fits into all outer pockets

• Sturdy bottom prevents bag from flopping over when sitting upright

CAT. NO. DESCRIPTION

PA4923

Ultimate Tool Bag with Plano^®tackle box

WEIGHT

2.2 lbs

PA4923

Tools and bits not included

www.greenlee.com

343

COMMUNICATIONS

COMMUNICATIONS KITS

SealTite^®Pro A/V Kit

The SealTite^®Pro A/V kit is all you need to make custom

length digital and analog audio and component video cables using

compression RCA, BNC and cable TV "F" connectors.

CAT. NO.

PA4915

DESCRIPTION

SealTite^®Pro A/V Kit

WEIGHT

46 oz

SEALTITE^®PRO A/V KIT INCLUDES

PA4915

Combination UTP/Coax Data SureStrip^®

SealTite Pro Compression Crimper

2 sets of color bands for RCA & BNC Connectors

PA1119

PA1559

N/A

6 BONUS RG6/RG6 QS Compression Connectors

PA9714

PA9715

PA9643

(2) RCA

(2) BNC

(2) Cable TV “F”

SealTite^®Pro Cable TV "F" Kit

Tackle all of your compression crimping jobs with the complete

SealTite^®Pro Kit. Includes all the tools you need to prepare the cable

and terminate any compression connector using RG59, RG6 or RG6 Quad

shield cables

PA4910

CAT. NO.

PA4910

DESCRIPTION

SealTite^®Pro Kit

WEIGHT

46 oz

SEALTITE^®PRO KIT INCLUDES

PA1179

PA1257

PA1917

PA1559

N/A

KT8 round cable cutter

LC CST CATV “F” coax stripper

RG6/RG6 Quad shield flaring tool

SealTite^®Pro compression crimper

RG6/RG6 Quad SealTite^®connectors (10)

TRUSTED

SINCE

1862

344

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

CoaxReady^™Compression Tool Kit

Adding to our CoaxReady™ solutions, this kit has everything you will

need to terminate any manufacturers' cable TV "F", RCA or BNC

compression connectors using RG6, RG6 Quad or RG59 cable sizes

• 12 piece kit

• Includes zippered Cordura^®portfolio case

CAT. NO.

PA906003

DESCRIPTION

CoaxReady^™Compression Tool Kit

WEIGHT

3.5 lbs

PA906003

COAXREADY^™COMPRESSION TOOL KIT INCLUDES

PA1821

PA1179

PA1119

PA1280

PA2280

PA2283

PA2282

PA2284

PA1927

N/A

AM 35 Slitter

KT8 Cutter

Data & A/V UTP & Coax Cutter/Stripper

CST Pro Coax tool

CST Pro GRN 3-Level Strip Blade Cartridge

CST Pro OG 3-Level Strip Blade Cartridge

CST Pro BK 3-Level Strip Blade Cartridge

CST Pro Rollers

CATV “F” Flaring & Insertion Tool

Zippered Cordura^®Portfolio Case

CoaxReady^™Deluxe Kit

Perfect for LAN/Ethernet or video & CATV installation. For a wide variety

of coaxial connectors including mini-coax and HDTV applications,

CoaxReady^™Deluxe combines our most popular tools for a complete

coax solution in a handy zipper case

• Kit also includes terminators and adapters

PA901081

CAT. NO.

PA901081

DESCRIPTION

CoaxReady^™Deluxe Kit

WEIGHT

3 lbs

COAXREADY^™DELUXE KIT INCLUDES

PA1179

PA1255

PA1302

DIE SETS:

PA2034

PA2649

PA2653

KT8 round cable cutter

LC CST-58/59 coax stripper

1300 crimp tool frame with EZI-CHANGE^™thumb screws

BNC/TNC - RG58/59/62AU

BNC/TNC - CATV “F” RG59/6/Belden 8281/1694A and 1505A

SMA/SMB/Mini 59 BNC & TNC/Mini-UHF

CoaxReady^™Kit

With this kit a technician is set to tackle most coaxial cabling challenges

Perfect for the LAN/Ethernet or video installation installer. For a wide

variety of coaxial connectors including mini-coax applications,

CoaxReady^™combines our most popular tools with the new LC CST

coax stripper in a handy zippered case

PA901054

CAT. NO.

PA901054

DESCRIPTION

CoaxReady^™Kit

WEIGHT

2.5 lbs

COAXREADY^™KIT INCLUDES

PA1179

PA1255

PA1302

DIE SETS:

PA2034

PA2075

PA2653

KT8 round cable cutter

LC CST-58/59 coax stripper

1300 crimp tool frame with EZI-CHANGE^™thumb screws

BNC/TNC - RG58/59/62AU

BNC/TNC - RG58/59/62AU RG6 Teflon/Plenum

SMA/SMB/Mini 59 BNC & TNC/Mini-UHF

Teflon^®is a registered trademark of Dupont

www.greenlee.com

345

COMMUNICATIONS

COMMUNICATIONS KITS

Telco Technician Tool Kit

CAT. NO.

DESCRIPTION

WEIGHT

PA4938

Telco Technician Kit

7.6 lbs

BROADCASTREADY^®PRO KIT INCLUDES

PA1116

PA1933

PA3570

PA4571

PA4599

N/A

Data SureStrip^®UTP/STP Cutter/Stripper

Datacomm Scissors

SurePunch Pro Punchdown Tool

110/66 blade

SurePunch Pro Detachable LED Light

Mini-MagLite^®

Sharpie^®Black Marker

GripPack Quick Release PDT Holster

All-in-One Phone/Data Crimp Tool

(50) RJ45 Cat5e Modular Plugs

RJ45 Adapter

N/A

PA4940

PA1561

PA9655

PA1902

PA1903

PA1573

TM500

N/A

PA4938

RJ11 Adapter

Tone Probe Plus Cable-Check^™

Butt Set

Plano^®Tackle Box

PA4923

Ultimate Tool Bag

BroadcastReady^®Kit

The BroadcastReady^™Kit includes professional tools for cutting, stripping,

crimping and testing coaxial cable connections for HDTV, video and RF

communications. Protected by a padded, zipper case. Also includes a

screwdriver to change out die sets

CAT. NO.

PA901083

DESCRIPTION

BroadcastReady^®Kit

WEIGHT

3 lbs

BROADCASTREADY^®PRO KIT INCLUDES

PA901083

PA1179

PA1280

PA2280

PA2281

PA2282

N/A

KT8 round cable cutter

CST Pro Coax tool

CST Pro GRN – common connectors

CST Pro OG – Kings & Amphenol 3-piece

CST Pro BK – ADC, Amphenol HDTV

Screwdriver to change dies

LAN ProNavigator^®tester & remote

1600 Series crimp frame

PA1543

PA1600

TRUSTED

SINCE

1862

346

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

DataComm Pro Starter Kit Max

This kit is also a starter kit for datacomm professionals

• 66 piece kit

• Includes the complete solution for cutting, crimping, and terminating

• All the tools included come in a compact zipper case

CAT. NO.

DESCRIPTION

WEIGHT

PA4908

DataComm Pro Starter Kit

1.8 lbs

DATACOMM PRO STARTER KIT INCLUDES

PA1116

PA3570

PA4528

PA1561

PA9520

N/A

Data SureStrip^®UTP/STP Cutter/Stripper

SurePunch Pro Punchdown Tool

110 Reversible blade

All-in-One Phone/Data Crimp Tool

(10) RJ45 Cat5e Modular Plugs

Compact Zipper Case

PA4908

DataReady^™Pro Kit

A complete data cable installation kit providing everything to support the

installer using commonly-available connectors, and punchdown termination

blocks. All tools contained in a professional-quality, soft-sided zipper case

with heavy-duty wrist strap

CAT. NO.

PA901378

PA9013781

DESCRIPTION

DataReady^™PRO Kit

DataReady^™PRO Kit - Krone*

WEIGHT

4 lbs

PA901378

4 lbs

DATAREADY^™PRO KITS INCLUDE

PA1116

PA1923

PA3589

PA4599

PA4591

PA4571

PA1543

PA8000

DIE SETS:

PA2061

PA2062

PA2063

PA2064

PA2067

Data SureStrip^®UTP/STP & flat satin cutter/stripper

Untwist Tool

SurePunch Pro punchdown tool

SurePunch Pro detachable LED light

Double 110 blade

110/ 66 blade**

LAN ProNavigator^®UTP/STP continuity tester & remote

CrimpALL^®crimp frame with EZI-CHANGE^™thumb screws

RJ45 WE/SS-style

RJ11/12 WE/SS-style

RJ22 handset

DRJ45 AMP-style

RJ11 DEC-MMJ

*

Additional 110 blade included in PA9013781 Kit

** Replaced with Krone blade PA4575 (only with PA9013781 Kit)

www.greenlee.com

347

COMMUNICATIONS

COMMUNICATIONS KITS

DataReady^™Kit

The complete Category 5 datacomm tool set in a handy zipper case.

Everything needed for a CAT-5 installation except the cable

CAT. NO.

PA901053

PA9010531

DESCRIPTION

WEIGHT

3 lbs

DataReady^™Kit

DataReady^™Kit - AMP/Krone*^†

3 lbs

PA901053

DATEREADY^™KITS INCLUDE

PA1116

PA1561

PA3570

PA4571

PA1576

N/A

Data SureStrip^®UTP/STP & flat satin cutter/stripper

All-in-One Phone/Data tool*

SurePunch Impact Punchdown Tool

110/ 66 blade**

Data Link/ID and Cable-Check^™Tester

(20) RJ45 plugs, Cat5e, solid/stranded; flat/round cable

Zipper Case with Carrying Strap

N/A

* WE/SS - style replaced with AMP - style #1557

** Contains 110 & Krone blades PA4575 (only with PA9010531 Kit)

† 68 spring- compression blades precisely adjust to the insulation.

Premise Service Kit

Our biggest data, voice, and coaxial LAN installation kit provides everything

for twisted pair and coaxial cable installation. All tools contained in a

professional blow-mold case complete with form-fitting foam

CAT. NO.

PA901039

DESCRIPTION

Premise Service Kit

WEIGHT

7.6 lbs

PA9010391 Premise Service Kit - AMP/Krone*

7.6 lbs

PA91039

PREMISE SERVICE KITS INCLUDE

PA1179

PA1257

PA1116

PA8000

PA3589

PA4599

PA4573

PA1543

PA1573

PA1902

KT8 round cable cutter

LC-CST CATV “F” coax stripper*

Data SureStrip^®UTP/STP & flat satin cutter/stripper

CrimpALL^®crimp frame with EZI-CHANGE^™thumb screws

SurePunch Pro punchdown tool

SurePunch Pro detachable LED light

66 blade***

LAN ProNavigator^®UTP/STP continuity tester & remote

Telephone Test Set & LAN Cable-Check^™

RJ45 8-way adapter

DIE SETS:

PA2062

RJ11/12 WE/SS-style**

PA2687

RJ45 WE/SS-style&RG6/RG6 QS CATV“F”**

*

Replaced with LC CST-58/59 coax stripper PA1255

** Replaced with RJ45 AMP-style & RG58/59 BNC/TNC dies PA2034, PA2064, PA2065

*** Replaced with BIX or Krone blade #PA4575 (only with PA9010391 Kit)

TRUSTED

SINCE

1862

348

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Network Tool Bundle

This new bundle provides the perfect solution for the do-it-

yourselfers that want to use professional tools or for small

contractors just starting out installing networks. It includes

everything you need but the cable to get the job done

CAT. NO.

DESCRIPTION

WEIGHT

PA4909

Network Tool Bundle

18.4 oz

PA4909 NETWORK TOOL BUNDLE INCLUDES

PA1116

PA1561

PA3580

PA9546

PA9520

Data SureStrip^®UTP/STP & flat satin cutter/stripper

All-in-One Phone & Data Tool

Non-impact 110 punchdown

10, RJ45 Cat5e plugs

10, RJ11 plugs

www.greenlee.com

349

COMMUNICATIONS

COMMUNICATIONS KITS

Computer Service Kit

• 3.6V cordless screwdriver, battery & charger

• ESD wrist strap

• 30-watt soldering iron

PA4370

• Desolderer & soldering aid with pick & scraper/cutter tip

• Needle nose pliers (2)

• Angled-head lead cutter

• Insulated tweezers

• Component gripper & IC extractor

• 10-piece driver socket set

• 24-piece driver bit set: Torx, Hex, Phillips, Pozidrive, Slotted,

and Square-Head

• Socket adapter/extender & socket bit holder/extender

CAT. NO.

DESCRIPTION

WEIGHT

PA4370

Computer service kit

4.5 lbs

Cordless Screwdriver & Socket Set

• Adjustable torque up to 21.7in-lbs (2.4 N-m)

• Includes 3.6V rechargeable battery

• AC adapter/battery charger & bit holder included

• Forward/reverse direction

• One-hand operation

• Handle swings easily from pistol to rod form

• Includes 14-piece socket set: 6-12 mm; 3/16”-1/2”

• Includes 26-piece driver bits: 3 slotted, 5 Torx,

3 Phillips, 3 Robertson, 12 hex

• Accepts 1/4” bits

PA4336

SPECIFICATIONS

Weight

Length

1.38 lbs. (.63 kg)

9.52" (242 mm)

Power Requirements 3.6V NiCd battery

Battery Life

Charging Time

AC adapter input

No-load Speed

Motor

Approx. 600 cycles

3-6 hours

120VAC 50-60Hz

170 rpm

3.6VDC

Max. torque

21.7 in-lbs. (2.4 N-m)

Not for use on precision torque screw requirements.

CAT. NO.

DESCRIPTION

PA4336

PA6000

PA6001

Cordless screwdriver & socket set

Replacement battery

Battery charger

TRUSTED

SINCE

1862

350

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Voice and Category 5 Data Termination Kit

• Includes the tools and connectors necessary for installing a voice

and data network

• Durable Cordura^®Plus zipper case protects and organizes tools

and includes a see-through pouch for storing connectors

• Outside pockets provide convenient storage of instruction manuals

or worksite documents

CAT. NO.

UPC NO.

DESCRIPTION

45469

Voice and Category 5 Data Termination Kit

Kit Includes:

45482

45579

46023

46022

45575

45482

45579

46023

46022

45575

Cable Cutter

Kwik Stripper^®Twisted Pair Stripper

Punchdown Tool with 110 Blade

66 Style Punchdown Blade

45469

Telephone Ratchet Crimper for 4-, 6- and 8- Position

Modular Plugs

45479

Zipper Case

Category 5 Data Termination and Test Kit

• Includes the tools, connectors and testers necessary for installing

a Cat 5 data network

• Durable Cordura^®Plus zipper case protects and organizes tools

and includes a see-through pouch for storing connectors

• Outside pockets provide convenient storage of instruction manuals

or worksite documents

CAT. NO.

UPC NO.

DESCRIPTION

45470

Category 5 Data Termination and Test Kit

Kit Includes:

45482

45579

46023

45575

45482

45579

46023

45575

Cable Cutter

Kwik Stripper^®Twisted Pair Stripper

Punchdown Tool with 110 Blade

Telephone Ratchet Crimper for 4-, 6- and 8- Position

Modular Plugs

45470

468T

60379

Modular Cable Tester Transmitter with Tone

Generator

468R

45485

60380

45485

Modular Cable Tester Receiver

Zipper Case

www.greenlee.com

351

COMMUNICATIONS

HAND TOOLS

Telecom Splice Crimpers

• Side cutter for AWG 19-26 copper

• Non-slip grips for precision control

• Limited lifetime warranty

• Crimp capacity

– UR: AWG 19-26

– UY: AWG 22-26

– UG: AWG 19-26

PA1180 only

• Stripping cavity for AWG 22 wire

PA1180

• Needle-nose with knurled surface for gripping, wrapping and looping

CAT. NO.

DESCRIPTION

PA1180

PA1178

4-in-1 Telecom Splice Crimper

Telecom Splice Crimper

PA1178

Round Cable Cutters

• Cuts solid or stranded cable up to AWG 6

• Precise and effortless cuts

• Round cutting form won't deform cables

• Ideal for UTP and Coax, RG58, RG59 and RG6/6Q;

RG7 and RG11 with PA1175

• Limited lifetime warranty

PA1175

CAT. NO.

DESCRIPTION

PA1175

PA1179

Contour Round Cable Cutter

Dual-Contour Round Cable Cutter

PA1179

Cable Cutter, 8 AWG

• Designed to cut solid, stranded wire up to 8 AWG (10 mm²)

and multi-conductor cable up to 1/2" (12.7 mm) in diameter

• Curved cutting blades ensure an easy cut

• Economically priced

• Cushioned-grip handle for comfortable use

• Heat-treated for long life

• Stamped and precision ground from high-carbon tool steel

• Return spring

• Locking latch

• Rust-resistant black oxide finish

CAT. NO. UPC NO. DESCRIPTION

45482

Cable Cutter

45482

TRUSTED

SINCE

1862

352

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Cable Splicer’s Knife and Splicer's Snips

• Cuts cable, telephone wire and strips insulation

• Tough, tempered steel knife blade holds its edge longer

• Full-sized knife handle provides greater comfort

• Knife has a short, coping-type blade made of the finest cutlery steel

• Scissors have an upper blade with two stripping notches to strip

most insulations from 19-24 AWG.

PT-K01A

CAT. NO.

UPC NO. DESCRIPTION

12997 Scissors and Knife Kit in Pouch

PT-K01A

DataComm Snips, Electrician's Snips

• Cuts, strips and trims data and phone cables

• Ergonomic design nests in hand for comfort and added cutting power

• One fully serrated blade for clean cuts

• “V” stripping notches for 19 and 23 AWG wire

• Manufactured from high-carbon steel, chrome over nickel plate

CAT. NO.

UPC NO.

DESCRIPTION

PT-T03

89195

Snips

Pro Stainless Steel Wire Strippers / Cutters / Crimpers

• Cutlery grade stainless steel prevents wear and corrosion to provide 5X longer life

• Pliers grab, form and bend wires

• Precision ground strippers engineered for clean, easy insulation removal

• Bolt Threaders clean threads after shearing

• Comfort Grips are double molded, lightweight and easy to grab

• Professional, multi-function tool includes a crimper, looper,

non-obstructive lock mechanism, spring return, and high grade shears

• Note: this is not an insulated tool

• Lifetime warranty

1955-SS

SOLID STRANDED BOLT

CAT. NO. UPC NO. DESCRIPTION

STRIP STRIP

SHEAR CRIMP

6-32, 8-32 16-10

6-32, 8-33 16-10

6-32, 8-34 16-10

1950-SS 02241 Pro Stainless Wire Stripper / Cutter / Crimper

10-18

12-20

8-16

1955-SS 01361 Pro Stainless Wire Stripper / Cutter / Crimper (Curve) 10-18

1956-SS 02242 Pro Stainless Wire Stripper / Cutter / Crimper (Curve) 6-14

www.greenlee.com

353

COMMUNICATIONS

HAND TOOLS

GripP-Strippers 10 & 20

• Head of tool and handles designed at optimum 22º angle to prevent

awkward wrist bends

• Precision grould blades ensure consistent stripping and cutting

• Features screw cutter and wire loops embedded in frames

• Built-in safety lock

• Gripping jaws on front of tool for pulling wire

• PA1117 will work on Romex household cable

• Note: This is not an insulated tool

CAP (AWG)

CAT. NO. DESCRIPTION

SOLID

STRANDED

PA1117

PA1118

PA1123

GripP 10 cutter/stripper

10-22

20-30

12-24

22-32

GripP 20 cutter/stripper

Wire Stipper Bundle, includes both PA1117 and

PA1118

Do not use on live circuits.

stripax^®Pro 6

• Strips heavy-duty and industrial insulations including

THHN & THHW

• Strips standard insulations including PVC, rubber and silicone.

• Provides nick-free stripping of insulation with no damage to conductors

• Built-in cutter provides a smooth, straight cut without distorting

the conductor

• Fine adjustment slider on top of tool lets you adjust to the

insulation thickness

PA2113

• Handles designed for comfort and require low hand force

• Not for Teflon or Kapton hard insulations (use part number PA1115P

mini-stripax Plus with a Teflon blade for these insulations)

• Perfect companion for any of our wire ferrule crimpers

• Strippers carry a lifetime warranty; blade warranty is one year

for defects only

• Lifetime limited warranty

CAT. NO.

DESCRIPTION

WEIGHT

PA1113

PA2113

stripax^®Pro 6 (28-10 AWG) (.08-6.0 mm2)

5.5 oz

stripax^®Pro 6 replacement stripping blade set

68 spring- compression

blades on Pro 6†

Adjustable wire stop to set

strip lengths

Do not use on live circuits

† 68 spring- compression blades precisely adjust to the insulation.

Teflon^®is a registered trademark of Dupont

Cutter on bottom means less

hand force required

Round stripping blades on

Pro 16 cut insulation cleanly

TRUSTED

SINCE

1862

354

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

mini-stripax^®plus

• Strips flexible and solid conductors with PVC, Teflon, silicone

and other special insulations

• Strips multiple conductors and thin ribbon-cable

conductors simultaneously

• Adjustable wire stop and built-in wire cutter

• 28-18 AWG (0.80-1.0 mm2) PVC blade included

• See replacement blades in next section

• Limited lifetime warranty

PA1115P

Strips PVC only. Do not use on live circuits.

For Teflon, order blades separately see below in mini-stripax plus Replacement Blades Section.

CAT. NO.

DESCRIPTION

WEIGHT

PA1115P

mini-stripax^®plus (28-18 AWG)

4 oz

Teflon^®is a registered trademark of Dupont

Adjustable Wire Stripper & Cutter

• Economical wire stripping tool for multiple cables

• Made of high carbon steel and heat treated for long life

• Adjustable settings for wire sizes from 30-10 AWG

Do not use on live circuits.

CAT. NO. DESCRIPTION

WEIGHT

PA1161

Adjustable wire stripper & cutter (30-10 AWG)

3 oz

PA1161

www.greenlee.com

355

COMMUNICATIONS

HAND TOOLS

Combo UTP/Coax SureStrip^®

• Professional all-in-one cutter/stripper for coaxial and

twisted pair cables

• Cuts and strips multiple cable types:

– Coax: RG6, RG6 Quad and RG59

– Twisted Pair (UTP/STP): Cat6, Cat5e and Cat5

• Easy-to-use combination cutter/stripper

• Adjustable stripping blade for UTP/STP;

accommodates different insulation thicknesses

without damaging conductors

• Self-regulating cassette blade prevents nicks

• Coax blade cassette is removable to adjust stripping

depth of both blades with hex key included

(Note: Hex key stores securely in bottom of tool)

• Contoured finger grips for cutting power

PA1119

CAT. NO.

DESCRIPTION

WEIGHT

PA1119

PA2119

PA2120

Combo UTP/Coax SureStrip^®

Coax Blade Cassette

UTP Cut/Strip Blade

2.5 oz

—

Data SureStrip^®

• Small, compact tool that cuts and strips multiple cable types:

– 4-, 6- and 8- conductor flat satin cables

– 4-, 6- and 8- conductor UTP/STP data cables

– 25- vpair UTP/STP data and telephone cables

• Multi-conductor round bundled cables with a

maximum diameter of .5” (12.7 mm)

• 14-8 AWG (2.5-75mm2) wire

• Nylon reinforced ABS plastic with stainless steel blade

• Fully adjustable with simple thumb screw

• Self-regulating to prevent nicking

• Contoured finger grips for power cutting

CAT. NO.

DESCRIPTION

WEIGHT

PA1116

Data SureStrip^®

2.5 oz

PA1116

TRUSTED

SINCE

1862

356

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

CST vario Stripper

• Most flexible coax stripping tool on the market

• Easy to set up and adjust

• Two- and three-level stripping

• Minimum center-to-center strip length is 0.13” (3.2 mm)

• Maximum total strip length is 0.67” (17 mm)

• Adjustable blade positioning in 0.04” (1 mm) increments

• Lifetime warranty on frame only

PA3242

*Not recommended for use on LMR or Teflon cables.

CAT. NO. DESCRIPTION

PA3240

PA3242

CST vario stripper

Replacement blade holder, blades & allen hex key

Teflon^®is a registered trademark of Dupont

PA3240

CST Strippers

• Fixed blade system that accommodates 0.1"-0.315" (2.5-8.0mm) cable

diameters including RG58/59/62AU, RG6, RG6 Quad, RG174,

Belden 1505A, 1855A and 8281

• Cam adjustment ensures precise and repeatable hold on cable

• Memory blocks reduce set-up time and are easy to interchange and mark

for various applications

• Blades are two-sided for longer use

• No cable jacket distortion during stripping process

• Blade cassettes easy to change

• Lifetime warranty on frame only

CAT. NO. DESCRIPTION

COMMON USES

PA1240

PA2240

PA1243

PA2243

PA1247

PA2247

PA1248

PA2248

PA1250

PA2245

CST Green - 3 Level (A=.279, B=.201)

Green Blade Cassette only

Common 2- & 3-piece

CST Brown - 3 Level (A=.295, B=.137)

Brown Blade Cassette only

CST Orange - 3 Level (A=.327, B=.146)

Orange Blade Cassette only

CST Black - 3 Level (A=.344, B=.094)

Black Blade Cassette only

PA1240

Kings, Amphenol 3-piece

ADC, Amphenol HDTV

CST Frame only

CST Memory Cartridge only

Y-block –

inserts into tool to tighten up

rollers for smaller cable sizes

PA2245

PA2240

PA2247

PA2248

www.greenlee.com

357

COMMUNICATIONS

HAND TOOLS

CST Pro Coax Stripper

• New patent-pending coax stripping system for precision & accuracy

• Works with a wide range of cable diameters from .1" - .315” (2.5-8.0mm)

including: RG58/59/62AU, RG6/6QS, RG174, Belden 1505A, 1855A & 8281

and mini-coax

• Pre-set for standard 2- and 3- level strip lengths

• Coax stripper designed for pros requiring precision, versatility & ease of use.

• Reversible-rollers easily adjust for various cable sizes including mini-coax.

• Dual roller mechanism perfectly centers cable & applies equal pressure to

eliminate cable distortion

• Quick-change pre-set blade cassettes

• Cam adjustment ensures precise hold on cable

• Fixed blade cassettes pre-set for standard 2- and 3- level strip lengths

• Interchangeable blades reduce set-up time

• Lifetime warranty on frame only

PA1282

CAT. NO. DESCRIPTION

COMMON USES

PA1280

PA2280

PA1281

PA2281

PA1282

PA2282

PA1283

CST Pro Green 3-level (A=.279, B=.201)

Green Blade Cassette only

CST Pro Orange 3-level (A=.327, B=.146)

Orange Blade Cassette only

CST Pro Black 3-level (A=.344, B=.094)

Black Blade Cassette only

Common 2- & 3-piece

PA2284

Reversible Rollers

Kings, Amphenol RFX 3-piece

ADC, Kings, Amphenol HDTV, Mini's

CST Pro Blue 2-level (A=.250)

Standard RG6/6QS & RG59,

CATV "F", Mini's

PA2283

PA1285

PA2284

Blue Blade Cassette only

CST Pro Frame only

CST Pro Rollers only

PA2282 3 Level

Blade Adjustment Screws

LC CST Strippers

• Self-regulating tension

• Adjust cutting depth on each blade for varying cable thicknesses with the

included hex key

• Pre-set for common strip lengths

• Blades adjust for strip dimensions other than our standard pre-set units*

SPECIFICATIONS

LC CST-58/59

PRESET STRIP LENGTHS* CABLE USAGE

0.315” outer jacket

0.157” inner dielectric

0.315” outer jacket

0.157” inner dielectric

RG58, RG59, RG62 AU & RG6

LC CST-11

RG8, RG11 & RG213

PA1255

LC CST CATV “F”

LC CST-Mini

0.236” outer jacket

RG59, RG6 & RG6 QUAD CATV”F”

(preset for RG6 CATV “F”)

RG178, RG179, RG188, AT&T

735(A), NT735, Belden 1855A,

Belden 8218, RG180, RG187,

RG188A, RG405 and more

0.344” outer jacket

0.094” inner dielectric

CAT. NO. DESCRIPTION

PA1255

PA1256

PA1257

PA1258

PA2263

LC CST-58/59 – 2- & 3-Level, Adjustable

LC CST-11 – 2- & 3--Level, Adjustable

LC CST CATV "F" – 2-Level

LC CST-Mini

Replacement Blade

*To adjust strip lengths simply change blade locations in the lower jaw to attain the following:

.157” (4 mm), .236” (6 mm), .315” (8 mm), .394” (10 mm) and .472” (12 mm)

Not recommended for use on LMR or Teflon cables.

Teflon^®is a registered trademark of Dupont

TRUSTED

SINCE

1862

358

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Kwik Stripper^®Twisted Pair Stripper

• No tool is better for trimming the jacket from twisted pair cable

without damaging the individual conductors

• Blade depth adjustment ensures precise cutting depth

• Blade penetration controlled by tension loop

• Strip length gauge

CAT. NO.

UPC NO.

DESCRIPTION

45579

Kwik Stripper^®Twisted Pair Stripper

45579

Typically used for Modular Plug Connectors (See pages 373)

Pro Kwik Stripper^®CATV

• Designed for the professional CATV cable installer. Uses reversible

stripping cartridges for RG6, RG59, RG11 and RG7 CATV cables that

are replaceable

• No adjustments needed

• Included with the tool, the RG6/RG59 cartridge strips

cable jacket and dielectric to 1/4" (6.4 mm)

• Included with the tool, the RG11/RG7 cartridge strips

cable jacket and dielectric to 1/4" (6.4 mm)

• Extra-large finger hole

45591

CAT. NO.

UPC NO.

DESCRIPTION

45591

01174

Pro Kwik Stripper^®CATV

www.greenlee.com

359

COMMUNICATIONS

HAND TOOLS

AM 25 Slitter

• Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables

• Adjustable cutting depth

• Swivel blade for circular, longitudinal and spiral cuts

• Spare blade in handle

• Cable holding clip with integrated edge for removing slit insulation

• Laser-trimmed, stainless-steel blade for long use

• Slits PVC, Teflon and THHN

• Perfect for armored cable

CAT. NO.

PA1820

PA2109

DESCRIPTION

AM 25

Replacement blade

NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations

Teflon^®is a registered trademark of Dupont

PA1820

AM 35 Slitter

• Strips and slits 1.0" to 1.4" (25-35mm) diameter Round Cables

• Adjustable cutting depth for insulation up to 0.18” (4.5 mm) thick

• Swivel blade for circular, longitudinal and spiral cuts

• Spare blade in handle

• Cable holding clip with integrated edge for removing slit insulation

• Laser-trimmed, stainless-steel blade for long use

• Slits PVC, Teflon and THHN

CAT. NO.

DESCRIPTION

PA1821

PA2109

AM 35

Replacement blade

Teflon^®is a registered trademark of Dupont

NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations

PA1821

Universal Slitter

• Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables

• Precision stripping and slitting of rubber, PVC, nylon and

most insulation materials

• Adjustable depth of cut

• Swivel blade for circular, longitudinal and spiral cuts

• Cable is supported during use

• Cable support arm edge is used to pry off thick insulation

• Laser-trimmed, stainless-steel blade for long use

• A perfect tool for mid-point taps

• Spare blade included

PA1822

CAT. NO.

DESCRIPTION

PA1822

PA2109

Universal splitter

Replacement blade

NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations

TRUSTED

SINCE

1862

360

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Pocket Cable Stripper

• Specifically designed for stripping power and telecommunications

cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm)

• Strips solid conductor, stranded conductor and multiple

conductor cables

• Easy blade depth adjustment

• Blade rotates for circular, longitudinal and spiral cuts.

1903

CAT. NO.

UPC NO.

DESCRIPTION

1903

12679

13544

13545

13546

Cable Stripping Tool

13544

13545

13546

Replacement Blade (2 per package)

Replacement Small Hook

Replacement Large Hook

Cable TV “F” Flaring & Attachment Tool

• Flares RG59, RG6 and RG6 Quad Cable types

• Works with CATV "F" connectors

• Save time on cable TV and satellite installations

• Flare the shield braid back from the dielectric without nicking your finger

• Make connections faster and easier with properly prepped cable

• Attachment tool enables you to hold the connector comfortably to insert

onto cable

PA1927

CAT. NO. DESCRIPTION

PA1927

Cable TV "F" Flaring & Attachment Tool

Coax 3-Way Tool

• Flares RG6 and RG6 Quad Cable types

• Flares shield braid back from the dielectric without nicking your fingers

• Attachment tool enables you to hold the connector comfortably to insert

connector onto cable

• Extraction tool to assist in coupling connector to port or to assist in

uncoupling from port

• Works with CATV "F" connectors

CAT. NO. DESCRIPTION

PA1928

Coax 3-Way Tool

www.greenlee.com

361

COMMUNICATIONS

HAND TOOLS

RG59/RG6/RG6 Quad Flaring Tool

• Works on RG59 and RG6/6 Quad cable

• Flares shield away from center dielectric

• Saves time on CATV and satellite installation

CAT. NO. DESCRIPTION

PA1917

RG59/6/6QS flaring tool

PA1917

BNC and CATV “F” Extraction Tools

PA1907

• Chrome finish

• Comfortable driver-style plastic handle

• 1908 CATV “F” is a combination tool. Use the hex socket to easily

remove and insert the connectors; Use the threaded end to hold the

connector while you insert cable for connectors. Helps to prevent finger

injuries

CAT. NO. DESCRIPTION

PA1908

PA1907

PA1916

CATV 8" (203 mm)

BNC 8" (203 mm)

BNC 12" (305 mm)

PA1908

PA1916

SealTite^®ProM Coax Crimper

• Crimps weatherproof linear CATV “F”, BNC, RCA & right- angle

compression-type connectors from all manufacturers

• Works with RG6, RG6 Quad, RG59 & RG62AU coax cables

• Versatile tool - accommodates multiple connectors

• The only tool with a single, reversible head eliminating need for adapters.

• No additional parts, attachments or other tools required to change from

one crimp style to another

• Quickly & easily adjust crimp height

• Once properly set, lock with adjustment lock

• Rated life cycle 30,000 (unloaded)

PA1559

CAT. NO. DESCRIPTION

PA1559

SealTite^®ProM Coax Crimper

TRUSTED

SINCE

1862

362

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

RG59/6Q-7/11 Pro Coax Compression Tool

• Versatile tool crimps RG59, RG6, RG6 Quad , RG 7/11, BNC and RCA

Compression Connectors

• Cable holder rotates to accommodate different connector sizes

• Adjustable Crimp length accommodates most manufacturers' connectors

• Once adjusted, no additional parts or adapters are needed to change from

one crimp style to another

CAT. NO. DESCRIPTION

PA70020 RG59/6Q-7/11 Pro Coax Compression Tool

PA70020

SealTite^®59/6 CATV “F” Compression Crimper

• Performs compression crimping of waterproof CATV “F” connectors for

RG59 and RG6/RG6 Quad 75 ohm coaxial cables

• Works on Augat/T&B Snap-N-Seal^™connectors, AIM CATV “F” waterproof

connectors and Paladin SealTite^™connectors

• Fully ratcheting one-cycle crimp function

CAT. NO.

DESCRIPTION

PA901024

SealTite^®Crimper

PA901024

www.greenlee.com

363

COMMUNICATIONS

HAND TOOLS

SealTite^®Cable TV “F” Compression Connectors

• Large hex nut for easy installations

• Patented design with 360º cable gripping sleeve

• Solid brass construction with nickel plating to prevent UV degradation

RG6 &

RG59

RG6 Quad RG6 Quad

DESCRIPTION

CAT. NO.

10 Pack Clamshell

20 Pack Clamshell

50 Pack Jar

100 Pack Bulk

*Also available in retail jar pack, PA9687.

PA9642

PA9610

PA9645

N/A

PA9643

PA9611

PA9646

PA9614

PA9644

PA9612

PA9647

PA9615

PA9642

SealTite^®RCA Compression Connectors

• Patented design with 360º cable gripping sleeve

• Full gold contacts for low signal loss

• Includes slip-on color bands for easy cable identification

• A set of bands includes 4 red, 2 green, 2 blue, 2 yellow

and 2 white per ten connectors

• Constructed from solid brass with nickel plating

RG6 &

RG59

RG6 Quad

DESCRIPTION

CAT. NO.

PA9714

10 Pack Clamshell

50 Pack Jar

PA9720

PA9721

PA9714

PA9716

SealTite^®BNC Compression Connectors

• Patented design with 360º cable gripping sleeve

• Full gold contacts for low signal loss

• Includes slip-on color bands for easy cable identification

• A set of bands includes 4 red, 2 green, 2 blue, 2 yellow

and 2 white per ten connectors

• Constructed from solid brass with nickel plating

RG6 &

RG59

CAT. NO.

PA9730

PA9731

RG6 Quad

CAT. NO.

PA9715

DESCRIPTION

10 Pack Clamshell

50 Pack Jar

PA9715

PA9740

Hex Crimp Cable TV “F” Connectors

• Crimp-on style cable TV “F” connectors

• All-brass with nickel plating for durability

• Designed for indoor use

RG59

CAT. NO.

PA9676

RG6

CAT. NO.

PA9677

RG6 Quad

CAT. NO.

PA9678

DESCRIPTION

PA9676

10 Pack Clamshell

Twist-On Cable TV “F” Connectors

• Connectors twist onto cable for quick installation

• Sharp threads firmly grip cable for good connections

• EZ-SPIN^™hex nut for easy installation

RG59

CAT. NO.

PA9694

RG6

CAT. NO.

PA9695

DESCRIPTION

PA9694

10 Pack Clamshell

TRUSTED

SINCE

1862

364

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Push-On Cable TV “F” Connectors

• No crimp tool required. Simply strip cable and push connector onto it

• Special knurled nut offers superior grip for strong connection

• All brass, nickel-plated for durability and low signal loss

• For indoor usage only

RG59

CAT. NO.

PA9682

RG6

CAT. NO.

PA9683

PA9682

DESCRIPTION

10 Pack Clamshell

Other Coaxial Connectors

Connect CATV “F” cables to RCA plugs.

• Eliminate the need for new cabling

• Solid brass with nickel plate

• 75 ohm rating

CAT. NO.

DESCRIPTION

PA9719

PA901074

PA9719

PA901074

Adapter, CATV “F” (female) to RCA (male) (Qty. 10)

Adapter, CATV “F” (female) to BNC (male) (Qty.1)

Dual Port Ground Block

• Provides a positive ground connection between two coaxial

shields and the ground wire

• Creates a connection for the dissipation of any unwanted

electrical charges

• Solid nickel plated zinc alloy

PA9675

• High-performance, 360º contact, for up to 3.0 GHz

• Suitable for satellite or cable TV

• UL/CSA approved

CAT. NO. DESCRIPTION

PA9675

Dual Port Grounding Block

Cable TV “F” Terminators

• Solid brass body with nickel plating

• ½ watt resistor (5% tolerance); 75 ohm

PA9686

CAT. NO. DESCRIPTION

PA9686

CATV "F" Terminators (10)

Female Splice Adapter

• Cable TV “F” female-to-female barrel adapter

• Designed for performance up to 3.0 GHz

• Gold-plated contacts

PA9675

• 2 pack

CAT. NO. DESCRIPTION

PA9675

Female Splice Adapter

BNC Coaxial Adapter

• Precision manufactured from machined brass and nickel plated

for corrosion resistance

CAT. NO. DESCRIPTION

45728

BNC Straight Jack to Jack (1)

45728

www.greenlee.com

365

COMMUNICATIONS

HAND TOOLS

Cable TV Splitters

• Split analog and digital cable TV signals to 2 to 4 outlets

• HDTV compatible and works with cable modems

• 75 ohm impedence

• 5-1000 MHz bandwith

• “F”-style female ports

PA9688

CAT. NO. DESCRIPTION

PA9688

PA9689

PA9690

2-Way Cable TV Splitter

3-Way Cable TV Splitter

4-Way Cable TV Splitter

PA9689

PA9690

Satellite TV Splitters

• Split satellite and digital signals to multiple outlets

• Compatible with most digital satellite brands, digital cable TV and HDTV.

• 75 ohm impedence

• 5-2400 MHz bandwith

• “F”-style female ports

PA9669

CAT. NO. DESCRIPTION

PA9669

PA9670

PA9671

2-Way Satellite TV Splitter

3-Way Satellite TV Splitter

4-Way Satellite TV Splitter

PA9670

PA9671

Satellite Diplexer

• Combines signal from satellite dish and UHF/VHF antenna into single coax

cable output

• 5-860 MHz antenna and 950-2450 satellite power pass

• For RG6 or RG6 Quad

• An additional diplexer can be used to split signals again for connection to

satellite and antenna ports on receivers

• Diplexed signals can be distributed through an amplifier to send signal to

multiple outlets

PA9673

CAT. NO. DESCRIPTION

PA9673

Satellite Diplexer

In-Line Amplifier

• Boost signals to multiple outlets or on long cable runs

• Works with satellite dish or terrestrial antenna installations with over

50’ of cable

• Digital TV ready

• 20 dB gain

• DC 12-18V

• 950-2400 MHz maximum bandwidth

PA9672

CAT. NO. DESCRIPTION

PA9672

In-Line Amplifier

TRUSTED

SINCE

1862

366

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

SurePunch Pro Punchdown Tool

• Terminate cable in single punch - including 23 AWG Cat6

• Detachable light with long-life LED specially designed to focus the

light on the panel work area

• Luminous intesity of the LED is 2200 mcd

• Finger grips and non-slip rubber-embedded cushioned handle

for comfort

• Multi-use spudger that can be used as a screwdriver or an IDC

contact insertion tool

• Hook to feed wires through holes

• Pick to separate bonded twisted-pair cables or to strip insulation

and cut wire

• Adjustable HI/LO spring compression for all cable types

LO = 27.5 lbs (122 N), HI = 37.5 lbs (167 N)

• Uses twist-and-lock style blades

• Blade storage area in end of handle with comfortable latch cover

PA3590

CAT. NO. DESCRIPTION

Tools with lights

PA3590

PA3584

PA3587

SurePunch Pro PDT handle (no blade) and light

SurePunch Pro PDT with Double 110 blade and light

SurePunch Pro PDT with 110 & 66 reversible cut & punch/punch-only

blades and light

PA3588

PA3596

PA3598

PA3599

SurePunch Pro PDT with 1110/66 combination cut-only

blade and light

SurePunch Pro PDT with 110 reversible cut & punch/punch-only blade

and light

SurePunch Pro PDT with BIX^™cut-only (scissors type)

blade and light

SurePunch Pro PDT with Krone^®LSA cut-only (scissors type) blade

and light

Tools without lights

PA3589

PA3585

PA3586

SurePunch Pro PDT handle (no blade)

SurePunch Pro PDT with Double 110 blade

SurePunch Pro PDT with 110 & 66 reversible cut &

punch/punch-only blades

PA3591

PA3592

PA3593

PA3595

PA4599

SurePunch Pro PDT with 1110/66 combination cut-only blade

SurePunch Pro PDT with 110 reversible cut & punch/punch-only blade

SurePunch Pro PDT with 66 reversible cut & punch/punch-only blade

SurePunch Pro PDT with Krone^®LSA cut-only (scissors type) blade

SurePunch Pro PDT detachable light and batteries

www.greenlee.com

367

COMMUNICATIONS

HAND TOOLS

SurePunch Punchdown Tools

• Cushion grip, molded to the shape of your hand, for comfort and a

sure, non-slip hold

• Increased HI/LO impact force to meet demands of new cable types

and AWG sizes: LO= 30 lbs (133 N), HI= 40 lbs (178 N)

• For 28-22 AWG (0.08 - 0.34 mm2), solid or stranded wire

• Uses twist-and-lock style blades

PA3570

• Cushioned heel for comfort in the palm of your hand

• New latch cover blade storage area in end of handle

• Lanyard holes in end

CAT. NO. DESCRIPTION

PA3570

PA3571

PA3572

PA3573

PA3574

PA3575

PA3576

PA3579

SurePunch PDT^®handle (no blade)

SurePunch PDT^®with 110/66 combination cut-only blade

SurePunch PDT^®with 110 reversible cut & punch/punch-only blade

SurePunch PDT^®with 66 reversible cut & punch/punch-only blade

SurePunch PDT^®with BIX^™cut-only (scissors type) blade

SurePunch PDT^®with Krone^®: SA (scissors type) blade

SurePunch PDT^®with Double - 110 blade

SurePunch PDT^®with both 110 and 66 reversible cut &

punch/punch-only blades

PA4571

PA4572

PA4573

PA4574

PA4575

PA4591

PA6514

SurePunch 110/66 combination cut-only blade

SurePunch 110 reversible blade

SurePunch 66 reversible blade

SurePunch BIX^™cut-only blade

SurePunch Krone^®LSA cut-only blade

SurePunch Double - 110 blade

Telephone Unwrap Bit

PA4591 PA4573 PA6514 PA4571 PA4574 PA4572 PA4575

Impact Punchdown Tools

• For 28-24 AWG Solid or Stranded conductor

• Standard impact compression design

• Adjustable HI/LO settings for compression force

• Impact force: HI = 35 lbs. (110 N), LO = 25 lbs. (155 N)

• Reversible clip-in blades (except BIX & Krone)

• Punches down with or without cut function (except BIX & Krone)

• Spare blade stores in handle of tool (except BIX & Krone)

• Impact handle and blades available separately

• Leather holster available to attach to belt

PA3528

CAT. NO.

DESCRIPTION

PA4527 PA4528 PA4531

PA3526

PA3527

PA3528

PA4527

PA4528

PA4531

Impact punchdown (tool handle only)

Impact punchdown w/66 blade

Impact punchdown w/110 blade

Replacement 66 blade

Replacement 110 blade

Replacement Krone^®-type blade

TRUSTED

SINCE

1862

368

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Punchdown Tool

• Inserts wire for a corrosion-resistant termination and trims off

excess wire

• Terminates 66, 110, BIX and Krone cross-connect and wall jacks

• Spring-loaded for fast, low-effort wire seating and termination

• Internal impact mechanism eliminates jamming for longer, trouble-free

service life

• Adjustable low - and high-impact force settings

• Bayonet-style blade locking mechanism

• Neoprene pad for shock absorption

• Spare blade storage in the handle

• Color-coded yellow on the cut side of tool

CAT. NO. UPC NO.

DESCRIPTION

46020

46021

46023

46022

46024

46025

46020

46021

46023

46022

46024

46025

Punchdown Tool Only

Punchdown Tool w/66 Blade

Punchdown Tool w/110 Blade

66 Style Blade

46023

110 Style Blade

BIX Style Blade

ProPunch^™110 Multi-pair Punchdown

Terminates and cuts up to five pairs of data/voice cable at the same time!

We designed it to perform over 30,000 cycle punches and to terminate most

23 AWG cable pairs in one punch! This tool delivers more than one and a

half times the force of other multi-punchdown tools on the market today. The

rugged “no-slip” handle fits comfortably in your hand with the handle end

contoured to the heel of your hand

• Fewer punches saves time

• Smooth operation and rugged, comfortable handle absorbs punch recoil

• Terminates 28-22 AWG (.08 - .34 mm2) solid or stranded wires with

single insulation

PA3560

• Cut and punch blade cassette or switch blades for punch only

• Designed to work with 23 AWG CAT 6 cable

CAT. NO. DESCRIPTION

PA3560

PA3561

PA4560

PA4561

PA4562

PA4563

ProPunch 110 with 5-pair head

ProPunch 110 with 4-pair head

Replacement 5-pair head

Replacement 4-pair head

Replacement 5-pair blade cassette

Replacement 4-pair blade cassette

www.greenlee.com

369

COMMUNICATIONS

HAND TOOLS

Non-Impact Punchdown Tools with Fixed Blades

• Non-impact, low-cost punchdown tools for 110, 66 & BIX

• Works with 28-22 AWG (.08 - .5 mm2)

• Solid or stranded, single insulation wire

• Comfortable rubber handle grip

PA3580

• Performs both cut and punch functions

• Perfect for small jobs and the do-it-yourself installer

• Fits in the palm of your hand

• Typically lower in cost than replacement blades for punchdown tools

PA3581

CAT. NO. DESCRIPTION

WEIGHT

PA3580

PA3581

PA3582

110 Punchdown Tool

66 Punchdown Tool

BIX^™Punchdown Tool

3 oz

PA3582

Punchdown Stripper

• Self-regulating strip depth

• Fast and easy to use

• Great for CAT-5, CAT-5e, and CAT-6 data cable

• Built-in 110 punchdown (punch only)

CAT. NO.

DESCRIPTION

WEIGHT

PA1913

Punchdown stripper

2 oz

PA1913

Pocket Probe Pick

Probe pick for pulling wire, slicing, stripping cable and cleaning debris off terminal

panels. Small and lightweight—pen-sized with clip for carrying in pocket

• Spudger tip

• Wire hook

• Wire stripper and slitting tooth

open

• Non-conductive scraping tip

CAT. NO. DESCRIPTION

PA1915 Pocket probe pick

WEIGHT

PA1915

3 oz

closed

Can Wrench

• Strips PVC insulation

• Strips outer jacket of AWG 22/4 and 24/4 telephone cable

• Strips insulation of AWG 22 (.34 mm2) and AWG 24 (.20 mm2) wire

• 3/8” (9.5 mm) and 7/16” (11 mm) hex sockets for accessing panels

• Durable shock-resistant design

PA1900

CAT. NO.

DESCRIPTION: HEAVY DUTY KEYSTONE TIP-

WEIGHT

PA1900

Can Wrench

5 oz

TRUSTED

SINCE

1862

370

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Jack Terminator

• High-grade, hardened steel frame offers superior performance

and durability

• Ratcheted action to ensure proper, consistent termination

• Adjustment feature for extra leverage applications

• Quick-change punch sets require no tools

• Removable jack cradle allows for alternate lacing option

• Punch heads can be purchased separately

• Rubber-embedded handles provide extra comfort

• For use with Modular Jacks listed below including CommScope^®

(Systimax^®, Uniprise^®), Leviton^®, OCC^®, HellermannTyton^®,

Hubbell^®Premise Wiring and Legrand^®(Ortronics^®)

• Lifetime Warranty (crimper frame only)

PA8100

SPECIFICATIONS

Specifications

PA8100

General Jack Terminator^™With

Punch Down Head-Set

General Punchdown

Head-Set

General Punch Head Only

Length

Height

Width

9.6” (245 mm)

3.25” (80 mm)

1.25” (32 mm)

1.25 lbs (575 g)

9.75” (248 mm)

4” (102 mm)

1.25” (32 mm)

1.4 lbs (652 g)

1.6” (40 mm )

4” (102 mm)

1.25” (32 mm)

2 oz (54 g)

1” (26 mm)

2.1” (55 mm)

1.25” (32 mm)

0.8 oz (23 g)

Weight

CAT. NO.

DESCRIPTION

Jack Terminator^™Crimper Frame

Jack Terminator^™with Punchdown Head-Set

Replacement Punchdown Head-Set

Replacement Punch Head Only

JACK COMPABILITY

PA8100

PA8105

PA3711

PA3811

PA8106

PA3712

PA8107

PA3713

PA8108

PA3714

PA8109

PA3715

PA8110

PA3716

PA8111

PA3717

PA8112

PA3718

Punchdown Head Set not Included

Systimax^®- MPS100E, Uniprise^®UNJ600/500

Systimax^®- MGS400, MGS500, MGS600

Leviton^®- 41106, 41108, 5G108

Leviton^®- 61110, 5G110, 6110G

OCC^®- KMJA5E, KMJA6, K6A

Jack Terminator^™with Punchdown Head-Set

Replacement Punchdown Head-Set

Jack Terminator^™with Punchdown Head-Set

Replacement Punchdown Head-Set

Jack Terminator^™with Punchdown Head-Set

Replacement Punchdown Head-Set

Jack Terminator^™with Punchdown Head-Set

Replacement Punchdown Head-Set

Jack Terminator^™with Punchdown Head-Set

Replacement Punchdown Head-Set

Jack Terminator^™with Punchdown Head-Set

Replacement Punchdown Head-Set

Jack Terminator^™with Punchdown Head-Set

Replacement Punchdown Head-Set

OCC^®- KMJA5E, KMJA6, K6A

HellermannTyton^®- RJ45FC5E, RJ45FC6

Hubbell^®- HXJ Series

Ortronics^®- TJ5E00, TJ600, TJ610

www.greenlee.com

371

COMMUNICATIONS

HAND TOOLS

All-in-One UTP Snagless Crimper

• Cuts and strips round or flat cable

• All metal construction

• Cushion grips for improved comfort and control

• For standard and "snagless" RJ45 connectors

• Also crimps RJ11/22 and RJ22 WE/SS style plugs

PA1561

CAT. NO. DESCRIPTION

PA1561

All-in-One UTP Snagless Crimper

All-in-One Ultra Telephone Tools

• 4 crimp functions with a single tool without changing dies

• Crimps 4- position RJ22 handset

• Crimps 4- and 6- position RJ11/RJ12 connectors

• Crimps 8- position RJ45 (non-keyed)

• Embedded cable cutter and stripper

• Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables

• Advanced ratchet system

PA901014

• Precision die-cast aluminum head

• Crimps 6- position RJ11-DEC offset type connectors (P/N 901014)

CAT. NO.

DESCRIPTION

PA901014

PA901016

PA2530

All-in-One Ultra Telephone Tool AMP (Tyco)

All-in-One Ultra Telephone Tool (WE/SS)

Replacement blade kit

All-in-One Pro Telephone Tools

• Crimps 4- position RJ22 connectors

• Crimps 4- and 6- position RJ11/RJ12 connectors

• Crimps 8- position RJ45 (non-keyed) connectors

• Embedded cable cutter and stripper

• Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables

• Comfortable rubber-embedded handles

• Built-in safety ratchet release

PA1530R

CAT. NO.

DESCRIPTION

PA1540

PA1530R

PA2530

All-in-One Pro Telephone Tool AMP (Tyco)

All-in-One Pro Telephone Tool (WE/SS)

Replacement blade kit

TRUSTED

SINCE

1862

372

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Telephone Ratchet Crimper

• Combination tool terminates 8- position, 6- position and 4- position

(45575 only) modular style plugs

• No need to change crimping dies

• Full-cycle ratchet mechanism provides consistent,

quality terminations every cycle

• Straight action ensures uniform crimp

• Small, compact design

• Built-in wire cutter and stripper for flat cable

• All-steel frame has rust-resistant, black oxide finish

45553

CAT. NO. UPC NO.

DESCRIPTION

Typically used for Modular Plug Connectors

(See below)

45553

45575

45553

45575

Telephone Ratchet Crimper

45575

Typically used for Modular Plug Connectors

(See below) Our Telephone Ratchet Crimper

was designed with a compact head to fit into

tight spaces and ergonomic handles for opera-

tor comfort.

Modular Plug Connectors

RJ45

RJ11

• RJ45 8-conductor modular plugs

• 50 micron gold plating

• Meets or exceeds EIA/TIA

specifications

• RJ11 6-conductor modular plugs

• For use with stranded wire

• 50 micron gold plating

RJ45

WE/SS-STYLE 8P8C CONNECTORS

CONNECTOR TYPE CABLE TYPE

QUANTITY CAT. NO.

PA9546

PA9655

PA9549

RJ45

Cat5e, Solid or Stranded

Round, Flat or Oval

10/Pack

50/Pack

100/Pack

RJ11

WE/SS-STYLE 6P6C CONNECTORS

DESCRIPTION

CONNECTOR TYPE CABLE TYPE

QUANTITY CAT. NO.

10/Pack PA9520

RJ11

Solid or Stranded

Round, Flat or Oval

www.greenlee.com

373

COMMUNICATIONS

HAND TOOLS

EK50ML Micro Crimping Tool

• Ergonomic; total weight less than 2.2 lbs

• Crimp 3x faster with 90% less force

• LED work light

• 65% faster crimping cycle vs ratcheting tool.

• 250 crimps per cycle charge when crimping 10AWG wire.

• Patented Jaw Actuation for crimping cycle

• Innovative trigger with PowerSense™ Technology

• Overmolded grip for maximum comfort

• 10.8V Li-Ion battery with charge indicator

SPECIFICATIONS

Weight

2.2 lbs (1 kg)

CAT. NO.

UPC NO. DESCRIPTION

Crimping tool kit with 12mm jaw and 110V charger with

carrying case

Crimping tool kit with 13.8mm jaw and 110V charger with

carrying case

Crimping tool kit with 12mm jaw and 230V charger with

carrying case

EK50ML12011

03105

03108

03123

03124

EK50ML13811

EK50ML12022

EK50ML13822

EK50ML138B

Crimping tool kit with 13.8mm jaw and 230V charger with

carrying case

EK50ML120B

EK50ML138B

MBP108

03128 12mm jaw EK50ML bare tool

03130 13.8mm jaw EK50ML bare tool

03127 10.8V EK50ML Li-Ion Battery

MBC110

MBC230

EK50MLCASE

03125 10.8V EK50ML Li-Ion Battery Charger, 110V

03126 10.8V EK50ML Li-Ion Battery Charger, 230V

03131 EK50ML Carrying Case

Note: EK50ML138 is compatible with all Greenlee Kwik Cycle^®and

CrimpALL^®dies for various types of cables and sizes.

COMPATIBLE DIE SETS

Wezag^®

CS30, CS150

Panduit^®

CT-2600,CT-300

Thomas & Betts^®

Sta-Kon^®

Ideal^®

EK50ML120

EK50ML138

See page 375-377 for the complete line of dies.

Crimpmaster^™

CrimpALL^®8000 Series Crimpers

• Ultra-smooth, fully ratcheting crimp cycle with built-in safety release

• Interchangeable die sets of heat-treated steel for long life

• Soft, rubber-embedded handles

• Long-lasting tool that delivers over 50,000 crimp cycles.

• Rugged, double-plated jaw design to increase life span.

• Lifetime warranty on tool; one-year on die sets

• Angled head to prevent awkward wrist bending during operation

• Reduced handle grip distance makes it easy for both small and large hands

• Higher crimp force produced with less hand force so hand doesn’t

tire as quickly

• No breakover hand force – the effort required by most crimpers to make the

last click at the end of the cycle to complete the crimp – the CrimpALL

does the work

PA8000

• Manufactured using the newest fine blanking technologies.

• EZI-Change^™die screws make changing dies quick and easy – no

screwdriver required

CAT. NO.

DESCRIPTION

PA8000

PA2303

CrimpALL^®tool frame

Replacement EZI-Change^™die screws (2)

TRUSTED

SINCE

1862

374

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

1300 Series Crimpers

• Fully-ratcheting cycle with built-in safety release

• Interchangeable die sets of heat-treated steel for long life

• Easy to use and maintain

• Available as complete tool with die set inserted or separate tool frame and

individual die sets

• Foam-lined case available to hold frame and 6 die sets together.

• Lifetime warranty on tool; one-year on die sets

• EZI-Change^™die screws make changing dies quick and easy –

no screwdriver required

• Most precise and tightest tolerances on die sets in the industry

• Six ratchet gear settings for optimum crimp performance

PA1302

CAT. NO.

DESCRIPTION

PA1302

PA2303

PA2346

Crimp tool frame

Replacement EZI-Change^™die screws (2)

Replacement Spring

CrimpALL^®Interchangeable Die Sets for Modular Plugs

DESCRIPTION

CONNECTION

CAT. NO.

CABLE TYPE

CRIMP SIZES

TOOL WITH DIE DIE ONLY REMARKS

RJ45 - 8P8C (8 Pin)

Flat/Round, Solid/Stranded

RJ45 Unkeyed WE and SS

Western Electric (WE)/Stewart

Connector (SS)

PA8030

PA1307

PA2061

PA2062

PA2063

RJ11 & RJ12 - 6P6C,

6P4C, 6P2C

RJ11 & RJ12 Unkeyed WE

and SS

Western Electric (WE)/Stewart

Connector (SS)

PA8031

PA1340

RJ22 Handset - 4P4C

(4 Pin)

4 Pin Handset WE and SS

Western Electric (WE)/Stewart

Connector (SS)

PA8032

RJ45 - 8P8C (8 Pin)

Flat/Round, Solid/Stranded

RJ45 Unkeyed AMP

RJ50 Unkeyed WE and SS

BT 6 Pole

AMP (Tyco) Inc. Connectors Only

Virginia Plastics (VP)

PA8033

PA1342

PA2064

PA2068

RJ50 - 10P10C (10 Pin)

PA8036

PA1345

British Telecom 6 Pole

Plug

British Telecom Plugs Only

AMP (Tyco) Inc. & Molex

PA2032

PA2674

RJ45, AMP/Molex

Connectors for dia.

Cable

6.0mm Dia. Round,

Shielded (STP)

RJ45 STP AMP & Molex,

6.0mm dia. cable

CrimpALL^®Interchangeable Die Sets for Specialty Crimpers

DESCRIPTION

CONNECTION

UTP 4-Pair & RG6/

CAT. NO.

CABLE TYPE

RJ45 WE/SS &

CRIMP SIZES

RJ45 WE/SS 8-pin &

TOOL WITH DIE DIE ONLY REMARKS

PA8045

0.360" (9.1mm) HEX/0.324" PA1387

(8.2mm) HEX

PA2687

For standard RJ45 WE/SS Modular

Plugs & 1-piece RG6/RG6 Quad

CATV "F" conns.

RG6/RG6 Quad CATV RG6 Quad

"F"

www.greenlee.com

375

COMMUNICATIONS

HAND TOOLS

CrimpALL^®Interchangeable Die Sets for Coaxial Connectors

DESCRIPTION

CAT. NO.

CABLE TYPE

CONNECTION

CRIMP SIZES

0.256" (6.5mm, 0.213" (5.4mm), PA8001

TOOL WITH DIE DIE ONLY REMARKS

RG58, RG59,

RG62AU

BNC/TNC and 3 Piece

PA2034

PA2648

Common 2-piece and 3-piece

BNC/TNC

0.068" (1.7mm) HEX

PA1317

RG174, RG59/62,

mini-coaxial 75-ohm

HDTV SMA, True 75-ohm

BNC/TNC, Mini-UHF

0.255" (6.5mm), 0.197"

(5.0mm), 0.178" (4.5mm),

0.068" (1.7mm) HEX & 0.042"

(1.0mm) SQ

PA8002

PA1366

Common 2-piece and 3-piece BNC/

TNC (Kings, ADC, Amphenol, etc.)

RG59, RG6, Belden

8281, Belden 1694A

HDTV BNC/TNC/CATV "f"

True 75-ohm

0.324" (8.2mm), 0.255"

(6.5mm), 0.068" (1.7mm) HEX

& 0.052" (1.3mm), 0.042"

(1.0mm) SQ

PA8003

PA1367

PA2649

Common 2-piece and 3-piece BNC/

TNC (Kings, ADC, Amphenol, etc.)

RG6, Belden 1694,

Bleden 1694A

HDTV BNC/TNC True

75-ohm

0.278" (7.0mm), 0.275"

(6.9mm), 0.068" (1.7mm) HEX & PA1368

0.042" (1.0mm) SQ

PA8004

PA2657

PA2653

Common 3-piece BNC/TNC (Kings &

ADC HDTV)

RG58, Mini-59, RG-

174, small coaxial

SMA, SMB, Mini-59 BNC/

TNC, Mini-UHF

0.128" (3.2mm), 0.213"

PA8005

Common 2-piece and 3-piece SMA/

SMB/BNC/TNC & Mini-UHF

(5.4mm), 0.197" (5.0mm), 0.178" PA1363

(4.5mm), 0.068" (1.7mm) HEX &

0.042"(1.0mm) SQ

RG58, RG174, AT&T

735, 50 and 75-ohm Mini-UHF

Thinnet, BNC/TNC,

0.213" (5.4mm), 0.178" (4.5mm) PA8006

PA2046

PA2047

50/75 ohm small 2-piece & 3-piece

BNC/TNC (Kings, ADC, etc.)

0.068" (1.7mm) HEX & 0.042"

(1.0mm) SQ

PA1335

RG59, RG62,

Belden 8281,

50 and 75-ohm

BNC/TNC and Mini-UHF

0.315" (8.0mm), 0.252"

(6.4mm), 0.068" (1.7mm), HEX

0.042" (1.0mm) SQ

PA8007

PA1336

75 ohm 2-piece & 3-piece BNC/TNC

(Kings, ADC, Amphenol, etc.)

RG174, RG179 and

Small Cable

Connection

BNC/TNC

0.178" (4.5mm), 0.128" (3.2mm), PA8008

PA2051

PA2045

PA2042

PA2656

Common 2-piece and 3-piece BNC/

TNC/SMA/SMB

0.068" (1.7mm) HEX

PA1338

RG6 and RG6 Quad,

Belden 1694A

BNC and CATV "F" Type

& HDTV

0.360" (9.1mm), 0.324"

(8.2mm), 0.068" (1.7mm) HEX

PA8012

PA1356

Common 2-piece and 3-piece BNC/

TNC and CATV "F" 2-piece

RG59, RG6 Video

Cable

CATV "F" Type

N-Type

0.346" (8.8mm)m 0.319"

(8.2mm), 0.256" (6.5mm) HEX

PA8013

PA1328

Crimps Ferrules or Sleeves Only

RG8, RG11, RG213

0.429" (10.9mm), 0.100"

PA8014

Common 2-piece and 3-piece "N"-

Type (Kings, ADC, Amphenol, etc.)

(2.54mm), 0.080" (2.03mm) HEX PA1365

RG8, RG11, RG213,

RG216

N-Type, MS39012 Type

0.415" (10.5mm), 0.095"

(2.4mm) HEX

PA8015

PA1319

PA2039

PA2699

Crimps Pins and Ferrules

Belden 1855A,

1865A, 1505A,

1505F, 1694A,

1694F, 179DT

HDYV BNC/TNC True

75-ohm

0.178" (4.5mm), 0.255"

(6.5mm), 0.278" (7.0mm),

0.068" (1.7mm), 0.041"

(1.0) HEX

PA8049

PA1389

Kings, ADC, B&L, Trompeter,

Amphenol, Switchcraft

Teflon^®is a registered trademark of Dupont

TRUSTED

SINCE

1862

376

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

CrimpALL^®Interchangeable Die Sets for Insulated Terminal Crimpers

DESCRIPTION

CAT. NO.

CABLE TYPE

CONNECTION

CRIMP SIZES

TOOL WITH DIE DIE ONLY REMARKS

12-10 (Yellow), 16-14 (Blue),

22-18 (Red), (6-4 / 2.5 - 1.5 /

.34 - .75 mm²)

Insulated Terminals

and Lugs

Solid or Stranded Wire,

22-10 AWG (.34 - 6

mm²)

PA8021

PA1305

PA2035

PA2040

PA2029

For Large Professional Terminals

(Panduit, T & B, etc.)

12-10 (Yellow), 16-14 (Blue),

22-18 (Red), (4/1.5 - 2.5 / .34

- .75 mm²)

Insulated Terminals

and Lugs

Solid or Stranded Wire,

22-12 AWG (.34 - 4

mm²)

PA8022

PA1308

For Standard Commercial Terminals

(Hardware Store Brands)

16-14 (Blue), 22-18 (Red),

22-26 (Yellow) (1.5 - 2.5 / .34 -

.75 / .34 - .10 mm²)

Insulated Terminals

and Lugs

Solid or Stranded Wire,

26-14 AWG (.10 - 2.5

mm²)

PA8023

PA1334

For Smaller Wire Barrel Terminals

CrimpALL^®Interchangeable Die Sets for Non-Insulated Terminal Crimpers

DESCRIPTION

CAT. NO.

TOOL WITH DIE DIE ONLY REMARKS

10-8 / 14-12 / 18-16 / 22-20 PA8024 PA2031 For Standard Commercial Terminals

CAT. NO.

CABLE TYPE

CONNECTION

CRIMP SIZES

Non-Insulated

Terminals and

Lugs

Solid or Stranded Wire,

22-8 AWG (.34 - .10

mm2)

(6 - 10 / 2.5 - 4 / .75 - 1.5 /

.34 - .50 mm2)

PA1322

CrimpALL^®Interchangeable Die Sets for Open Barrel, Box and Terminal Systems

DESCRIPTION

CONNECTION

CAT. NO.

CABLE TYPE

CRIMP SIZES

22-18 / 16-14 / 12-10

(.34 - .75 / 1.5 - 2.5 /

4-6 mm²)

TOOL WITH DIE DIE ONLY REMARKS

Open Barrel Non-

Insulated Terminals,

Narrow Lugs and

Power Contacts

Solid or Stranded Wire,

22-10 AWG (.34 - 6

mm²), F Type*

PA8026

PA1306

PA2033

PA2096

PA2097

For Standard Commercial Terminals

16-14 / 22-18

(1.5 - 2.5 / .34 - .75 mm²)

Open Barrel Non-

Insulated Terminals,

Wide Lugs and Power mm²), F Type*

Contacts

Solid or Stranded Wire,

22-14 AWG (.34 - 2.5

PA8027

28-24 / 22-20

(.08 - .2 / .34 - .5 mm²)

Open Barrel D-Sub

Solid or Stranded Wire,

PA8029

PA1359

For Standard D-sub Pins Only; not for

HD D-subs

Contact Pins RS-232 28-20 AWG (.08 - .50

mm²), F Type*

CrimpALL^®Interchangeable Die Sets for Wire Ferrules

DESCRIPTION

CONNECTION

CAT. NO.

CABLE TYPE

CRIMP SIZES

TOOL WITH DIE DIE ONLY REMARKS

Insulated & Non-

Insulated Wire

Ferruls

Solid or Stranded Wire,

22-10 AWG (.34 - 6

mm2)

22-20 / 18-16 / 14-12 / 10

(.34 - .55 / .75 - 1.5 / 2.5 -

4 / 6 mm2)

PA8025

PA1360

PA2095

For DIN or US Type

Wire Ferrules

www.greenlee.com

377

COMMUNICATIONS

HAND TOOLS

D-sub Indent Crimpers

• Adjustable Pin Height Locator

• Cushion Grips for comfort

CAT. NO. DESCRIPTION

PA1460

PA1461

PA1462

D-sub 4 Indent Crimper 26-20 AWG

D-sub 4 Indent Crimper 20-12 AWG

D-sub 8 Indent Crimper 26-20 AWG

PA1460

Electrical Terminal Crimper

• D-sub Pins & Sockets 26-28 AWG

• Butt-Insulated Connectors 22-26 AWG

• Telephone Piercing Spade Lugs 22-26 AWG

• Open Barrel Connectors 14-18, 20-22 AWG

CAT. NO.

DESCRIPTION

PA1176

Multi-Purpose Electrical Terminal Crimper

PA1176

EDAC/ELCO Crimper

Crimp tool for broadcast professionals terminating loose 28-18 AWG

(.08-75 mm²) EDAC and ELCO rack and panel open barrel contacts

• Crimps EDAC pins 516-290-590 & 516-290-591 along with ELCO pins

000-60-8017-03-13

• Embedded pin locators properly align pins to ensure accurate,

reliable crimping

• Fully-ratcheted to prevent under crimping

• Requires low hand force and provides superior crimp force

• True ergonomic design for extreme comfort and performance

• Non-slip, soft rubber handles

• Double-plated for extended long-life and crimping accuracy

• Factory-calibrated and set for precision

PA1670

SPECIFICATIONS

Weight

19 oz. (538 g)

Pin locators

CAT. NO.

DESCRIPTION

PA1670

EDAC/ELCO Crimper

TRUSTED

SINCE

1862

378

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Open Barrel Contact Pin Crimper

Professional crimping tool for open-barrel box and round connector contacts

with a wire range of 30-18AWG (0.05-.75 mm2)

• Precision fixed dual-plate dies for crimp accuracy

• Crimps non-insulated terminal lugs, cable lugs and parallel and serial

splices or “F-Type”

• Works with Molex, Waldom & Leoco-type connectors

• Durable steel construction for long life

• Rubber-embedded ergonomic handles for low-effort operation

PA1645

SPECIFICATIONS

Weight

Range

14 oz. (400 g)

Small: 30-24 AWG (0.05-.20 mm2)

Medium: 22-18 AWG (.34-.75 mm2)

CAT. NO.

DESCRIPTION

PA1645

Open Barrel Contact Pin Crimper

Professional crimping tool for open-barrel box and round connector

contacts with a wire range of 24-14 AWG (0.2-2.5 mm2)

• Precision fixed dual-plate dies for crimp accuracy

• Built-in locator

• Crimps non-insulated terminal lugs, cable lugs and parallel and

serial splices or “F-Type”

• Works with Molex, Waldom & Leoco-type connectors

• Durable steel construction for long life

• Rubber-embedded ergonomic handles for low-effort operation

SPECIFICATIONS

Weight

Range

14 oz. (400 g)

Small: 24-22 AWG (0.05-.20 mm2)

Medium: 18-14 AWG (.34-.75 mm2)

PA1631

CAT. NO.

DESCRIPTION

Open Barrel Contact Pin Crimper

PA1631

www.greenlee.com

379

COMMUNICATIONS

HAND TOOLS

Kwik Cycle^®9" Crimp Frame

• Used to manually crimp a wide variety of connectors

and terminals to factory specifications

• Frame features a precision full-cycle ratchet for accurate,

repeatable crimps every cycle

• Crimp release lever improves throughput by eliminating rejected

terminations due to improper connector positioning

• Frame features a tension adjustment preset at the factory

for optimum performance

• High-leverage force and ergonomically-designed handle provides

comfortable use

• Frame and dies are manufactured from heat-treated, hardened tool steel

for superior function and long life

• All die sets are easily interchangeable with a simple screwdriver.

45504

See our comprehensive line of connectors on pages 364 and 373.

CAT. NO. UPC NO. DESCRIPTION

45504

Kwik Cycle 9" Crimp Frame

Kwik Cycle^®9" Interchangeable Die Sets for Insulated & Non-Insulated Terminals

DESCRIPTION

CAT. NO. UPC NO. CAT. NO. UPC NO.

CONNECTION

FEATURES

TOOL WITH DIE

DIE ONLY

Color Coded nests for easy identification

Standard insulated terminals, ring tongue,

spade lug, slide on and but splices

45500

45501

45500

45509

45570

45565

45507

22-10 AWG

Color Coded nests for easy identification

for fully insulated slide-on style connectors

AMP Ultrafast^TMstyle

45501

45570

45565

45507

22-10 AWG

26-16 AWG

For mini insulated terminals with smaller wire

barrels. RIng tongue, spade, slide on and butt

splices

For non-insulated terminals and splices

45505

22-8 AWG

TRUSTED

SINCE

1862

380

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

Heat Gun

• Electronic variable heat control ranging from 250-1100º F (120-590º C)

• Two speeds: high & low

• Double insulation safeguards injury from possible electrical failure

inside gun

• Comfortable, lightweight design reduces operator fatigue

• Three nozzles included: window nozzle, deflection nozzle and .47” (12 mm)

focusing nozzle

• UL listed

PA1873

SPECIFICATIONS

Power reqs.

Current draw

Power cons.

120VAC 60 Hz

7.5 amps max.

1200 watts max.

CAT. NO.

DESCRIPTION

Heat gun

PA1873

Desoldering Tools

• Removes solder with simple push-button operation

• Standard (regular & anti-static) replacement tips available

• Repair kits come complete with replacement spring and suction rods

• Durable metal frame

CAT. NO. DESCRIPTION: DESOLDERING TOOLS

PA1700

PA2712

Desoldering tool (standard)

Standard replacement tip

Cable Tie Gun

• For use with plastic cable ties up to 0.25” (6.35 mm) in width

• Neatly fastens and cuts in one action

• Adjustable tension for changing cable bundle pressure

• Automatic cable tie cut off

PA1828-1

CAT. NO.

DESCRIPTION

PA1828-1

Cable tie gun

Note: Leaves 1 mm tab of lock after cut is made.

Kwik Cycle^®Cable Tie Guns

• Tension adjustment allows the user to adapt the tool to the size of the tie

• Automatic cut-off eliminates sharp edges on ties

CAT. NO. UPC NO. DESCRIPTION

45306

45300

45306

45300

Standard Cable Tie Gun

Heavy-Duty Cable Tie Gun

45306

www.greenlee.com

381

COMMUNICATIONS

HAND TOOLS

HDMI TOOLS

HDMI^®* HDFT^™Cable Prep Tool

A PRODUCT VIDEO IS

AVAILABLE, SCAN THIS QR

CODE OR VISIT:

www.youtube.com/GreenleeDEMO

• Use with Greenlee^®24 AWG HDFT^™cable & connectors

• Cuts 24 AWG HDFT^™cables, strips outer jacket and twisted pair shielding

• Curved blade for cutting HDMI^®* and HDFT^™cables

• Precision stripping cavity for removing outer jacket on 24 AWG HDFT^™cables

• Exclusive cavity for removing twisted pair shielding on 24 AWG HDFT^™cables

CAT NO.

UPC NO. DESCRIPTION

00072 Cable Prep Tool

PA1192

24 AWG HDMI^®* Field Terminating Cable

• Use with Greenlee^®HDFT^™Connectors

• Make premium HDMI^®* High Speed with Ethernet cables

• Supports HDMI^®* 1.4 features: 3D, Ethernet and Audio Return

• 100’ 24 AWG HDFT^™cable

• Solid-core long grain copper

• Fifth twisted pair for Ethernet and audio return

• Other HDMI^®* 1.4** features supported: 10.2 Gbps Data Rate, 3D Video

Formats, Deep Color and 4k x 2k Resolution

FTHD24-100

CAT NO.

UPC NO. DESCRIPTION

00079 100' 24 AWG Field Terminating Cable

FTHD24-100

HDMI^®* Field Terminating Connectors

• Make custom length, premium HDMI^®* cables

• Eliminates cable clutter

• Costs less than pre-terminated cables

• 10 or 50 pack – 24 AWG HDFT^™Connector Components

• Use With Greenlee^®24 AWG HDMI^®* Field Terminating Cable only

• Includes main connector terminal block and wire guides

• Guides are mated and colorcoded for 24 AWG HDMI^®* Field Terminating cable

• Make custom length, premium HDMI^®* High Speed with Ethernet cables

HDCN24-10

CAT NO.

UPC NO. DESCRIPTION

HDCN24-10

HDCN24-50

00073

00074

Field Terminating Connectors (10 Pack)

Field Terminating Connectors (50 Pack)

*HDMI Equivalent

HDMI^®* Registered trademark of HDMI Licensing, LLC

HDFT^™Trademark owned by the Quest Group

TRUSTED

SINCE

1862

382

= BARE TOOL

= REPLACEMENT PART

= ACCESSORY

= NEW PRODUCT

B

HDMI TOOLS

HDFT^™Pro Deluxe Kit

• Make custom length, premium HDMI^®* cables

• Eliminates cable clutter

• Costs less than pre-terminated cables

14 Piece Kit Includes:

1) PA1192 HDMI^®* HDFT^™Cable Prep Tool

(1) PA8700 HDMI^®* HDFT^™Termination Tool

(10) HDCN24-10 HDMI^®* Field Terminating Connectors

(1) PA1175 Media Cable Cutter

PA4017

(1) TC-30 Deluxe Carrying Case

CAT NO.

UPC NO. DESCRIPTION

00099 Pro Deluxe Kit

PA4017

HDFT^™Pro Kit

12 Piece Kit Includes:

(1) PA1192 HDMI^®* HDFT^™Cable Prep Tool

(1) PA8700 HDMI^®* HDFT^™Termination Tool

(10) HDCN24-10 HDMI^®* Field Terminating Connectors

CAT NO.

UPC NO. DESCRIPTION

00101 Pro Kit

PA4019

Pro HDMI^®Cable Tester

• 14 LED readout for easy checking

• Sweep function checks for crossed wires

• 9V battery included

PA1599

CAT NO.

UPC NO. DESCRIPTION

00075 Pro Cable Tester

PA1599

HDFT^™Die Set

• Precision cast 4140 steel for durability

• High tensile steel cutting blades for long life

• Error-proof design avoids misalignment

PA4003

CAT NO.

UPC NO. DESCRIPTION

00098 Die Set

PA4003

*HDMI Equivalent

HDMI^®* Registered trademark of HDMI Licensing, LLC

HDFT^™Trademark owned by the Quest Group

www.greenlee.com

383

COMMUNICATIONS

NOTES

TRUSTED

SINCE

1862

384


型号：	PA8027
厂家：	ETC
描述：	TOOL HAND CRIMPER 14-22AWG SIDE
文件：	总108页 (文件大小：10596K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PA8027 [ETC]

相关型号：

PA8032

PA8036

PA806C03

PA80F/FF

PA80J

PA80Q

PA8100

PA8105

PA8106

PA8107

PA8108

PA8109