PE-36005W [ETC]

*Transformer Selection Guide for Siemens Telecom ICs - (5/96) ; *变压器选型指南西门子电信IC - ( 5/96 )\n
PE-36005W
型号: PE-36005W
厂家: ETC    ETC
描述:

*Transformer Selection Guide for Siemens Telecom ICs - (5/96)
*变压器选型指南西门子电信IC - ( 5/96 )\n

变压器 电信
文件: 总6页 (文件大小:166K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TRANSFORMER SELECTION GUIDE  
FOR SIEMENS TELECOM ICs  
IU-3  
SC  
Transformers, hybrids and common mode  
chokes specifically matched to Siemens  
transceiver ICs  
Applications include ISDN-BRI S and U  
interfaces, ISDN-PRI/T1/E1 and ISDN U  
PO  
Safety agency approvals for most models  
Surface mount and through hole models  
BH  
AN  
Transformer Selection Guide  
THT  
SMT  
Ext Temp  
Dual  
THT  
Single  
THT  
3KV Single  
THT  
Dual  
SMT  
Single  
SMT  
Dual  
IC Chip  
Application  
Ratio  
Vertical  
Package  
PEB 2080  
PEB 2081  
PEB 2084  
PEB 2085  
PEB 2086  
PSB 2186  
PEB 2091  
PEB 2091  
PEB 2095  
PSB 2196  
ISDN-S  
ISDN-S/T  
ISDN-S/T  
ISDN-S  
1:2  
1:2  
PE-64995  
PE-64995  
PE-64995  
PE-64995  
PE-64995  
PE-64995  
PE-65575  
PE-36005  
PE-65378  
PE-68995  
PE-68995  
PE-68995  
PE-68995  
PE-68995  
PE-68995  
PE-68669  
PE-68975  
PE-65495  
PE-65795  
PE-65795  
PE-65795  
PE-65795  
PE-65795  
PE-65795  
PE-68975  
PE-65495  
1:2  
PE-68975  
PE-65495  
1:2  
PE-68975  
PE-65495  
ISDN-S  
1:2  
PE-68975  
PE-65495  
ISDN-S/T  
ISDN-U  
1:2  
PE-68975  
PE-65495  
1.65:1  
Echo Cancellation  
1.25:1  
2:1  
ISDN-U  
PE-36005W  
PE-68616  
PE-68617  
ISDN-U  
P0  
ISDN-U  
pn  
PEB 2254 T1/CEPT/PRI 1CT:1.41CT  
PE-68788  
PE-68786  
PE-68887  
TABLE A: Packaging Information  
Package  
LA  
Type  
SMT  
SMT  
SMT  
SMT  
SMT  
SMT  
SMT  
SMT  
THT  
THT  
THT  
THT  
THT  
THT  
THT  
THT  
Part Weight  
2 grams  
Parts/Tube  
Parts/Tray  
Parts/Reel  
Reel Diameter Tape Width  
Pitch  
30  
35  
20  
60  
25  
40  
30  
25  
25  
20  
35  
35  
40  
25  
60  
60  
250  
150  
150  
1500  
1500  
600  
250  
13 inches  
24 mm  
24 mm  
PA-2  
SC  
4 grams  
13 inches  
32 mm  
24 mm  
7 grams  
50  
13 inches  
44 mm  
24 mm  
SH-3  
SH-4  
BH  
0.2 grams  
0.3 grams  
1 gram  
13 inches  
16 mm  
12 mm  
13 inches  
24 mm  
12 mm  
13 inches  
24 mm  
12 mm  
AN  
4.0 grams  
1.5 grams  
1.5 grams  
7 grams  
13 inches  
32 mm  
24 mm  
DP-14SM  
DP-14TH  
ID  
IN  
2.5 grams  
4 grams  
IS  
VC  
3.5 grams  
9 grams  
WD  
HC  
1.2 grams  
14 grams  
IU-3  
45  
12220 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 92128 • TEL 619-674-8100 • FAX 619-674-8262 • http://www.pulseeng.com  
1
T609.A (5/96)  
T1/CEPT/ISDN-PRI  
TRANSFORMERS  
IS  
Characteristics matched to Siemens  
transceiver chips  
AN  
Dual and single models available  
Extended and standard temperature  
range models available  
Surface mount and through hole models  
BH  
Operating  
Temp Range  
Isolation  
Voltage  
Part Number  
Type  
Mounting  
Turns Ratio  
Inductance  
Package  
Data Sheet  
PE-68786  
PE-68887  
PE-68788  
Dual Xfmr  
Dual Xfmr  
Single Xfmr  
SMT  
SMT  
THT  
1CT:1.41CT&1CT:1.41CT  
1CT:1.41CT&1CT:1.41CT  
1CT:1.41CT  
1.0 mH MIN  
0.8 mH MIN  
1.2 mH MIN  
0°C to +70°C  
-40°C to +85°C  
-40°C to +85°C  
1500 Vrms  
1500 Vrms  
3000 Vrms  
BH  
AN  
IS  
T608  
T608  
T608  
TYPICAL T1/CEPT APPLICATION  
Transformer  
Transformer  
IC  
RCV  
IC  
XMIT  
4-Line  
4-Line  
High  
High  
Freq  
XMIT  
RCV  
Freq  
Choke  
Choke  
COMMON MODE CHOKES  
Designed for 2-wire and 4-wire  
digital links  
IN  
LA  
HC  
Models for EMI reduction and improv-  
ing balance in ISDN S applications  
Low frequency models effective from  
100 KHz to 50 MHz  
High frequency models effective from  
1 MHz to 300 MHz  
SH-4  
SH-3  
12220 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 92128 • TEL 619-674-8100 • FAX 619-674-8262 • http://www.pulseeng.com  
2
T609.A (5/96)  
ISDN S-INTERFACE  
TRANSFORMERS  
VC  
WD  
ID  
Characteristics matched to  
Siemens transceiver chips  
Designed to meet layer 1  
requirements of ITU I.430  
Safety agency approvals per EN  
41003/ EN 60950 and UL 1459  
Excellent longitudinal balance  
IS  
SC  
Part Number  
Type  
Mounting  
Turns Ratio  
Inductance  
I  
MAX  
Isolation Voltage Package  
Data Sheet  
DC  
PE-64995  
PE-65495  
PE-65795  
PE-68975  
PE-68995  
Single Xfmr  
Dual Xfmr  
Dual Xfmr  
Single Xfmr  
Single Xfmr  
THT-Horz  
THT-Horz  
SMT-Horz  
THT-Vert  
THT-Horz  
1CT:2CT  
22 mH MIN  
22 mH MIN  
22 mH MIN  
22 mH MIN  
22 mH MIN  
1 mA  
1 mA  
1 mA  
1 mA  
5 mA  
2000 Vrms  
2000 Vrms  
2000 Vrms  
2000 Vrms  
3000 Vrms  
IS  
ID  
T604  
T604  
T604  
T609  
T604  
1CS:2CS & 1CS:2CS  
1CS:2CS & 1CS:2CS  
1CS:2  
SC  
VC  
WD  
1CS:2  
TE  
TYPICAL ISDN S-INTERFACE APPLICATION  
NT  
Sec : Pri  
Pri : Sec  
IC  
RCV  
IC  
XMIT  
Sec : Pri  
Pri : Sec  
4-Line 4-Line  
4-Line 4-Line  
Low  
High  
Freq  
High  
Freq  
Low  
XMIT  
RCV  
Freq  
Choke Choke  
Freq  
Choke Choke  
Local  
Power  
DC  
Supply  
Common Mode Chokes  
Number  
Part Number  
Peak Common  
Mode Attentuation  
Isolation  
Voltage  
Mounting  
Inductance  
Application  
Package  
Data Sheet  
of Lines  
Low Frequency Chokes  
PE-65853  
PE-65950  
PE-68613  
4-Line  
4-Line  
4-Line  
SMT  
4.7 mH ±30%  
4.7 mH ±30%  
4.7 mH ±30%  
1 MHz  
1 MHz  
1 MHz  
Improve Balance  
Improve Balance  
Improve Balance  
500 Vrms  
500 Vrms  
500 Vrms  
PA-2  
IS  
T604  
T604  
T604  
THT-Horz  
THT-Vert  
VC  
High Frequency Chokes  
PE-65554  
PE-65854  
PE-65857  
PE-65944  
PE-68624  
4-Line  
THT  
SMT  
SMT  
THT  
SMT  
24 µH MIN  
47 µH MIN  
22.5 µH MIN  
24 µH MIN  
47 µH MIN  
30 MHz  
30 MHz  
30 MHz  
30 MHz  
30 MHz  
EMI Reduction  
EMI Reduction  
EMI Reduction  
EMI Reduction  
EMI Reduction  
500 Vrms  
500 Vrms  
500 Vrms  
500 Vrms  
500 Vrms  
IN  
SH-4  
LA  
T604  
T604  
T604  
G002  
G002  
4-Line  
4-Line  
2-Line  
2-Line  
HC  
SH-3  
12220 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 92128 • TEL 619-674-8100 • FAX 619-674-8262 • http://www.pulseeng.com  
3
T609.A (5/96)  
ISDN U-INTERFACE  
TRANSFORMERS  
IU-3  
For ISDN U-Interface 2B1Q  
Applications  
DP-14TH  
Characteristics matched to Siemens  
transceiver chips  
Meets key parameters of ANSI  
T1-601-1992  
Space savings Echo Cancellation  
Hybrid available  
DP-14SM  
Part Number  
Mounting Receive Turns Ratio  
Inductance  
I  
DC  
MAX  
Isolation Voltage  
Package  
Data Sheet  
PE-65575  
PE-68669  
THT  
THT  
1.65CS:1CT  
1.65CS:1CT  
13 mH-18 mH  
13 mH-18 mH  
50 mA  
50 mA  
2000 Vrms  
3000 Vrms  
IU-3  
IU-3  
T603  
T603  
Part Number  
Type  
Echo Cancellation Hybrid  
Mounting  
Package  
Data Sheet  
PE-36005  
THT  
SMT  
DP-14 TH  
DP-14 SM  
T603  
T603  
PE-36005W Echo Cancellation Hybrid  
TYPICAL ISDN U-INTERFACE APPLICATION  
Echo Cancellation Hybrid  
8
10 nF  
23.3  
A-OUT  
Transformer  
5
9
619  
7
4
3
681  
10 K  
10 K  
10 K  
4
B-IN  
A-IN  
10 nF  
10 nF  
11  
2
1
3.01 K  
6.8 nF  
10 K  
5
10  
619  
PE-65575  
or  
PE-68669  
2-Line  
High Freq  
Choke  
6
7
12  
B-OUT  
23.3  
PEB 2091  
PE-36005/PE-36005W  
Notes  
1. The purpose of the T609 data sheet is to serve as a  
selection guide for Pulse products matched to  
Siemens telecom transceiver chips. For complete  
electrical, mechanical and safety information, request  
the data sheet listed next to the part number.The data  
sheets can be requested through any Pulse location  
worldwide, authorized distributors, the WEB site or  
through the “Quick-Facts” system. Please see the  
back page for more information.  
created by connecting two ends of a split center wind-  
ing together on the printed circuit board. In ISDN S  
applications, the primary winding is the line side trans-  
former winding.  
3. Standard packaging for the chokes and transformers  
listed in this catalog is anti-static tubes. Optional anti-  
static tray packaging can be ordered for the surface  
mount SC and LA packages by adding an “R” suffix to  
the part number, (ie: PE-65795R). Optional tape and  
reel packaging can be ordered for surface mount  
packages by adding a “T” suffix to the part number,  
(ie: PE-65795T). See Table A for more information.  
2. In this catalog, turns ratio is expressed as  
“primary:secondary”.The term “CT” designates a cen-  
ter tapped winding. The term “CS” designates a split  
center tap winding. A center tapped winding can be  
12220 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 92128 • TEL 619-674-8100 • FAX 619-674-8262 • http://www.pulseeng.com  
4
T609.A (5/96)  
ISDN UP0 AND ISDN Upn  
TRANSFORMERS  
VC  
SA  
Characteristics matched to  
Siemens transceiver chips  
Available in surface mount and  
through hole packages  
PE-68975 is electrically  
equivalent to PE-64995  
PA-2  
Electrical Specifications @ 25°C — Operating Temperature 0°C to 70°C  
Inductance  
(mH)  
Isolation  
(Vrms MIN)  
MAX  
I
Primary  
Pins  
DC  
Part Number  
Type  
Mounting Turns Ratio  
DCR Pri  
DCR Sec  
Package  
ISDN U  
P0  
and ISDN U  
Transformers  
pn  
PE-65378 Single Xfmr  
PE-68616 Single Xfmr  
PE-68617 Single Xfmr  
ISDN S Transformer  
THT 1.25CS:1CS 4.2 ±10%  
2.9 MAX  
1.6 MAX  
4.2 MAX  
2.4 MAX  
2.4 MAX  
8.0 MAX  
1500  
1500  
1500  
80 mA  
60 mA  
100 mA  
1-4  
1-5  
SA-1/A  
PA-2/B  
SMT  
SMT  
1CS:1.25  
1CS:2  
1.7 MIN  
1.7 MIN  
6-10 PA-2/C  
PE-68975 Single Xfmr THT-Vert  
1CS:2  
22 MIN  
2.5 ±25% Ω  
5.0 +25% Ω  
2000  
1 mA  
1-6  
VC-1/D  
Schematics  
Mechanicals  
SA-1  
.750  
19,05  
.470  
11,94  
.600  
15,24  
MAX  
MAX  
A
8
1
1
8
7
2
3
7
6
.750  
19,05  
2
3
4
.600  
15,24  
PE-XXXXX  
Date Code  
Country of  
Origin  
MAX  
C
L
6
5
4
5
C
L
.200  
5,08  
.130 ± .010  
3,30 ± 0,25  
VC-1  
.400  
10,16  
.500  
12,70  
.300  
7,62  
.200  
5,08  
MAX  
MAX  
D
1
3
10  
8
1
3
8
PE-XXXXX  
.505  
12,83  
.400  
10,16  
10  
5
MAX  
Date Code  
Country of  
Origin  
C
L
6
5
6
C
L
.115 ± .010  
2,92 ± 0,25  
Inches  
mm  
Dimensions:  
010  
0,25  
.
Unless otherwise specified all tolerances are ±  
See page 1 for packaging information.  
12220 WORLD TRADE DRIVE, SAN DIEGO, CALIFORNIA 92128 • TEL 619-674-8100 • FAX 619-674-8262 • http://www.pulseeng.com  
5
T609.A (5/96)  
ISDN UP0 AND OTHER  
TRANSFORMERS  
Schematics  
Mechanicals  
PA-2  
.550  
B
C
7
MAX  
13,97  
.120  
3,05  
.050  
1,30  
TYP  
TYP  
10  
6
.100  
2,54  
.030  
0,76  
10  
9
6
10  
6
.400  
10,16  
.720  
18,29  
.530  
13,46  
.520  
13,20  
.760  
19,30  
MAX  
MAX  
PE-XXXXX  
.200  
5,08  
Date Code  
1 CoOurnigtriynof  
5
.200  
5,08  
.100  
2,54  
.072  
1,83  
.600  
15,24  
SUGGESTED PAD LAYOUT  
1
2 4  
5
2
4
.010 / .020  
0,25 / 0,51  
.390  
9,91  
Inches  
mm  
MAX  
Dimensions:  
010  
0,25  
.
Unless otherwise specified all tolerances are ±  
See page 1 for packaging information.  
.040 / .050  
1,01 / 1,27  
.004/0,10  
Quick-Facts (U.S. Only)  
To provide you with 24-hour service, Pulse has introduced Quick-Facts, a convenient method to fax to you the latest  
complete data sheets from Pulse.  
Just dial: 619-674-9672  
When prompted by Quick-Facts:  
• Enter 1001 for a menu of available documents  
• Enter 1002 for the Product Index  
World Wide Web  
For the most current product information, please visit our web site:  
http://www.pulseeng.com  
For More Information :  
Corporate  
Europe  
Dunmore Road  
Tuam  
County Galway  
Ireland  
Tel: 353 93 24107  
FAX: 353 93 24459  
Asia  
Distributor  
12220 World Trade Drive  
San Diego, CA 92128  
Tel: 619 674 8100  
FAX: 619 674 8262  
http://www.pulseeng.com  
Quick Facts: 619 674 9672  
Block 3027  
Ubi Road 1  
#03-120  
Singapore 408720  
Tel: 65 741 5227  
FAX: 65 741 3013  
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice.  
Printed on recycled paper. ©1996, Pulse Engineering, Inc.  
6
T609.A (5/96)  

相关型号:

PE-39803-120

7/16 DIN Male to 7/16 DIN Male Low PIM Cable 240 Inch Length Using 1/2 inch Superflexible Coax, RoHS
PASTERNACK

PE-39803-36

7/16 DIN Male to 7/16 DIN Male Low PIM Cable 240 Inch Length Using 1/2 inch Superflexible Coax, RoHS
PASTERNACK

PE-39803-48

7/16 DIN Male to 7/16 DIN Male Low PIM Cable 240 Inch Length Using 1/2 inch Superflexible Coax, RoHS
PASTERNACK

PE-39803-72

7/16 DIN Male to 7/16 DIN Male Low PIM Cable 240 Inch Length Using 1/2 inch Superflexible Coax, RoHS
PASTERNACK

PE-39803-96

7/16 DIN Male to 7/16 DIN Male Low PIM Cable 240 Inch Length Using 1/2 inch Superflexible Coax, RoHS
PASTERNACK

PE-3V

General Purpose
PREMO

PE-3V-E2

General Purpose
PREMO

PE-4290X

2 Watt Pulse Electrostatically Shielded, 500 mW Pulse, RF Pulse and Control Transformers
ETC

PE-50500

THT Toroidal Inductors - High Inductance
ETC

PE-50501

THT Toroidal Inductors - High Inductance
ETC

PE-50502

THT Toroidal Inductors - High Inductance
ETC

PE-50503

THT Toroidal Inductors - High Inductance
ETC