PI74LCX16501A [ETC]

18-Bit Bus Transceiver ; 18位总线收发器\n
PI74LCX16501A
型号: PI74LCX16501A
厂家: ETC    ETC
描述:

18-Bit Bus Transceiver
18位总线收发器\n

总线收发器 触发器 逻辑集成电路 光电二极管 输出元件
文件: 总5页 (文件大小:218K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PI74LCX16501  
Fast CMOS 18-Bit Registered Transceivers  
Product Description  
Product Features  
• FunctionallycompatiblewithFCT3, LVT, and74series  
16501 families of products  
Pericom Semiconductor’s PI74LCX series of logic circuits are  
produced using the Company’s advanced 0.6 micron CMOS  
technology, achieving industry leading speed grades.  
• Tri-State outputs  
ThePI74LCX16501isan18-bitregisteredbustransceiverdesigned  
with D-type latches and flip-flops to allow data flow in transparent,  
latched, and clocked modes. The Output Enable (OEAB and  
OEBA, Latch Enable (LEAB and LEBA) and Clock (CLKAB and  
CLKBA) inputs control the data flow in each direction. When  
LEAB is HIGH, the device operates in transparent mode for A-to-  
B data flow. When LEAB is LOW, the A data is latched if CLKAB  
is held at a HIGH or LOW logic level. The A bus data is stored in  
the latch/flip-flop on the LOW-to-HIGH transition of CLKAB, if  
LEAB is LOW. OEAB performs the output enable function on the  
B port. Data flow from B port to A port is similar using OEBA,  
LEBA and CLKBA. This high-speed, low-power device offers a  
flow-through organization for ease of board layout.  
• 5V Tolerant inputs and outputs  
• 2.0V-3.6V VCC supply operation  
• Balanced sink and source output drives (24 mA)  
• Low ground bounce outputs  
• Supports live insertion  
• ESD Protection exceeds 2000V, Human Body Model  
200V, Machine Model  
• Packages available:  
–56-pin240-milwideplasticTSSOP(A)  
–56-pin300-milwideplasticSSOP(V)  
ThePI74LCX16501canbedrivenfromeither3.3Vor5.0Vdevices  
allowing this device to be used as a translator in a mixed  
3.3V/5.0V system.  
Logic Block Diagram  
OEAB  
CLKBA  
LEBA  
OEBA  
CLKAB  
LEAB  
A1  
C
D
C
B1  
D
C
D
C
D
TO 17 OTHER CHANNELS  
PS2091A 02/11/97  
1
PI74LCX16501  
18-BIT REGISTERED TRANSCEIVERS  
Truth Table(1)  
Product Pin Description  
Inputs  
LEAB CLKAB  
Outputs  
Pin Name  
OEAB  
OEBA  
LEAB  
LEBA  
CLKAB  
CLKBA  
Ax  
Description  
OEAB  
Ax  
X
L
Bx  
Z
A-to-B Output Enable Input  
B-to-A Output Enable Input (Active LOW)  
A-to-B Latch Enable Input  
B-to-A Latch Enable Input  
A-to-B Clock Input  
L
H
H
H
H
H
H
X
H
H
L
L
L
L
X
X
X
L
H
L
H
L
B-to-A Clock Input  
H
X
X
H
B(2)  
B(3)  
A-to-B Data Inputs or B-to-A 3-State Outputs  
B-to-A Data Inputs or A-to-B 3-State Outputs  
Ground  
H
L
Bx  
GND  
Notes:  
VCC  
Power  
1. A-to-B data flow is shown. B-to-A data flow is similar  
but uses OEBA, LEBA, and CLKBA.  
2. Output level before the indicated steady-state input  
conditions were established, provided that CLKAB was  
HIGH before LEAB went LOW.  
Product Pin Configuration  
3. Output level before the indicated steady-state input  
conditions were established.  
4. H = High Voltage Level  
1
56  
55  
54  
53  
52  
51  
50  
49  
48  
47  
46  
45  
44  
43  
42  
41  
40  
39  
38  
37  
36  
35  
34  
33  
32  
31  
30  
29  
OEAB  
LEAB  
A0  
GND  
A1  
A2  
VCC  
A3  
A4  
A5  
GND  
A6  
A7  
GND  
CLKAB  
B0  
GND  
B1  
B2  
VCC  
B3  
B4  
B5  
GND  
B6  
B7  
2
3
L = Low Voltage Level  
Z = High Impedance  
= LOW-to-HIGH Transition  
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
56-PIN  
V56  
A56  
A8  
A9  
B8  
B9  
A10  
A11  
GND  
A12  
A13  
A14  
VCC  
A15  
A16  
GND  
A17  
OEBA  
LEBA  
B10  
B11  
GND  
B12  
B13  
B14  
VCC  
B15  
B16  
GND  
B17  
CLKBA  
GND  
PS2091A 02/11/97  
2
PI74LCX16501  
18-BIT REGISTERED TRANSCEIVERS  
Maximum Ratings  
(Above which the useful life may be impaired. For user guidelines, not tested.)  
Note:  
Storage Temperature ............................................................. –65°C to +150°C  
Ambient Temperature with Power Applied ............................ –40°C to +85°C  
Supply Voltage to Ground Potential (Inputs & Vcc Only) .... –0.5V to +7.0V  
Supply Voltage to Ground Potential (Outputs & D/O Only) . –0.5V to +7.0V  
DC Input Voltage .................................................................... –0.5V to +7.0V  
DC Output Current ............................................................................... 120 mA  
Power Dissipation .................................................................................... 1.0W  
Stresses greater than those listed under MAXIMUM  
RATINGS may cause permanent damage to the de-  
vice. This is a stress rating only and functional opera-  
tion of the device at these or any other conditions  
above those indicated in the operational sections of  
thisspecificationisnotimplied. Exposuretoabsolute  
maximum rating conditions for extended periods  
may affect reliability.  
Recommended Operating Conditions  
Symbol  
Parameter  
Min.  
2.0  
1.5  
0
Max.  
3.6  
Units  
VCC  
Supply Voltage  
Operating  
Data Retention  
3.6  
VI  
Input Voltage  
5.5  
V
VO  
Output Voltage  
HIGH or LOW State  
TRI-State  
0
VCC  
5.5  
0
IOH/IOL  
Output Current  
VCC = 3.0V-3.6V  
VCC = 2.7V  
±24  
±12  
+85  
10  
mA  
TA  
Free-Air Operating Temperature  
Input Edge Rate  
40  
°C  
V = 0.8V-2.0V, VCC = 3.0V  
0
ns/V  
t/V  
PS2091A 02/11/97  
3
PI74LCX16501  
18-BIT REGISTERED TRANSCEIVERS  
DC Electrical Characteristics (Over the Operating Range, TA = 40°C to +85°C, VCC = 2.7V to 3.6V)  
Parameters Description  
Test Conditions(1)  
Min.  
2.0  
Typ(2)  
Max.  
Units  
V
IH  
IL  
OH  
Input HIGH Voltage  
Input LOW Voltage  
Output HIGH Voltage  
Guaranteed Logic HIGH Level  
Guaranteed Logic LOW Level  
V
0.8  
V
V
V
V
CC = 2.7-3.6  
I
I
I
I
I
I
I
I
OH = –0.1mA  
OH = –12mA  
OH = –18mA  
OH = –24mA  
OL = 0.1mA  
OL = 12mA  
OL = 16mA  
OL = 24mA  
V
CC-0.2  
2.2  
2.4  
2.2  
CC = 2.7  
CC = 3.0  
V
VOL  
Output LOW Voltage  
V
V
V
CC = 2.7-3.6  
0.2  
0.4  
0.4  
0.55  
1.2  
±5  
CC = 2.7  
CC = 3.0  
V
IK  
Clamp Diode Voltage  
Input Leakage Current  
Tri-State Output Leakage  
VCC = Min., IIN = –18mA  
0.7  
I
I
0 V  
I
5.5V  
5.5V  
Vcc = 2.7-3.6  
IOZ  
0 V  
O
V
CC = 2.7-3.6  
±5  
V
V
V
I
= VIH or VIL  
I
OFF  
Power Down Disable  
CC = 0V, VIN or VOUT 5.5V  
10  
10  
µA  
I
CC  
Quiescent Power Supply  
Current  
CC = Max.  
CC = Max.  
V
or VCC  
IN = GND  
0.1  
Quiescent Power Supply  
Current  
V
V
IN = VCC – 0.6V(3)  
500  
ICC  
TTL Inputs HIGH  
Notes:  
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.  
2. Typical values are at VCC = 3.3V, +25°C ambient.  
3. Per TTL driven input; all other inputs at VCC or GND.  
Capacitance  
Parameters Description  
Test Conditions  
CC = Open, V  
CC = 3.3V, V  
CC = 3.3V, V  
Typ.  
7
Units  
C
IN  
OUT  
PD  
Input Capacitance  
V
I
= 0V or VCC  
C
Output Capacitance  
V
I
= 0V or VCC  
8
pF  
C
Power Dissipation Capacitance  
V
I
= 0V or VCC, F = 10 MHz  
20  
PS2091A 02/11/97  
4
PI74LCX16501  
18-BIT REGISTERED TRANSCEIVERS  
Switching Characteristics over Operating Range  
VCC = 3.3V ± 0.3V  
VCC = 2.7V  
Parameters Description  
fmax Maximum Clock Frequency  
Conditions  
Min.  
170  
1.5  
Max.  
Min.  
Max.  
Units  
CL  
= 50 pF  
MHz  
RL  
= 500  
t
PHL  
Propagation Delay  
Bus to Bus  
6.0  
6.5  
6.5  
7.5  
6.0  
1.5  
1.5  
1.5  
1.5  
1.5  
7.0  
7.5  
7.5  
8.5  
7.0  
tPLH  
t
PHL  
Propagation Delay  
Clock to Bus  
1.5  
1.5  
1.5  
1.5  
tPLH  
t
PHL  
Propagation Delay  
LE to Bus  
tPLH  
tPZL  
Output Enable Time  
tPZH  
ns  
tPLZ  
Output Disable Time  
tPHZ  
t
S
Setup Time  
Hold Time  
Pulse Width  
2.5  
1.5  
3.0  
2.5  
1.5  
3.0  
tH  
tW  
tSK(O)  
Output to Output Skew(1)  
1.0  
Note:  
1. Skew between any two outputs, of the same package, switching in the same direction.  
Dynamic Switching Characteristics (TA = +25°C)  
Parameters Description  
Test Conditions(1)  
CC = 3.3V, C = 50pF  
Typ.  
Units  
VOLP  
Dynamic LOW Peak Voltage  
V
L
V
IH = 3.3V, VIL = 0V  
0.8  
V
VOLV  
Dynamic LOW Valley Voltage  
VCC = 3.3V, C = 50pF  
L
VIH = 3.3V, VIL = 0V  
Note:  
1. Measured with n–1 outputs switching from High-to-Low or Low-to-High. The remaining output is measured in the LOW state.  
Pericom Semiconductor Corporation  
2380 Bering Drive • San Jose, CA 95131 • 1-800-435-2336 • Fax (408) 435-1100 • http://www.pericom.com  
PS2091A 02/11/97  
5

相关型号:

PI74LCX16501AX

Registered Bus Transceiver, LVC/LCX/Z Series, 1-Func, 18-Bit, True Output, CMOS, PDSO56, 0.240 INCH, 1.10 MM HEIGHT, 0.50 MM PITCH, PLASTIC, TSSOP-56
PERICOM

PI74LCX16501V

18-Bit Bus Transceiver
ETC

PI74LCX16543

Logic | 16-Bit Latched Transceiver
ETC

PI74LCX16543A

Dual 8-bit Bus Transceiver
ETC

PI74LCX16543AX

Registered Bus Transceiver, LVC/LCX/Z Series, 2-Func, 8-Bit, True Output, CMOS, PDSO56, 0.240 INCH, 1.10 MM HEIGHT, 0.50 MM PITCH, PLASTIC, TSSOP-56
PERICOM

PI74LCX16543V

Dual 8-bit Bus Transceiver
ETC

PI74LCX16543VX

Registered Bus Transceiver, LVC/LCX/Z Series, 2-Func, 8-Bit, True Output, CMOS, PDSO56, 0.300 INCH, 0.635 MM PITCH, PLASTIC, SSOP-56
PERICOM

PI74LCX16646

Logic | 16-Bit Registered Transceiver
ETC

PI74LCX16646A

Dual 8-bit Bus Transceiver
ETC

PI74LCX16646AX

Registered Bus Transceiver, LVC/LCX/Z Series, 2-Func, 8-Bit, True Output, CMOS, PDSO56, 0.240 INCH, PLASTIC, TSSOP-56
PERICOM

PI74LCX16646V

Dual 8-bit Bus Transceiver
ETC

PI74LCX16646VX

Registered Bus Transceiver, LVC/LCX/Z Series, 2-Func, 8-Bit, True Output, CMOS, PDSO56, 0.300 INCH, PLASTIC, SSOP-56
PERICOM