PLB111020-M [ETC]
MAGIC LED;
ETC 
MAGIC LED
PLB111020 Series
Advanced Product Information
Description
Plessey MAGIC PLB111020 PLCC-2 SMT LEDs are designed for ambient decorative
lighting. The light is emitted close to a Lambertian distribution and hence this SMT
package is naturally suitable for backlighting instrument cluster panel and symbols. The
LEDs are packed in reels containing 2000 pieces; every reel will be shipped in single
intensity and colour bin, to provide close uniformity
Features
Applications
• Industry standard 3528 footprint
• Decoration Lighting
• High reliability PLCC packaging
• 120 degree wide viewing angle
• GaN-on-Si die technology
• Instrument panel backlighting
• Illumination symbols
• Navigation backlighting
Dominant Wavelength (nm)
Variant
Min.
450
460
470
Max.
460
470
480
PLB111020-M
PLB111020-P
PLB111020-T
Datasheet No 292944 Issue 1
1 of 11
15/04/2014
uct Information
Absolute Maximum Ratings
Tamb = +25oC unless otherwise stated
Parameter
Symbol
Minimum
Maximum
Unit
mA
mA
V
DC Forward Current
Peak Pulse Forward Current[1]
Reverse Voltage
IF
IFP
VR
Tstg
Tj
-
25
50
-
-
5
Storage Temperature
Junction Temperature
-30
-
+100
+110
oC
oC
[1]
Pulse width ≤10ms, duty cycle ≤10%
Electro-optical Characteristics
Tamb = +25oC unless otherwise stated
Parameter
Symbol
Condition
IF = 20mA
VR = 5V
Min.
2.8
-
Typ.
Max.
3.4
5
Unit
V
Forward Voltage
Reverse Current
VF
IR
3.2
-
µA
450
460
470
-
460
470
480
-
Dominant wavelength
λd
IF = 20mA
IF = 20mA
nm
Thermal Resistance
Half-Intensity Angle
Rthj-sp
tbd
K/W
-
120
-
Deg.
2Θ1/2
Recommended Operating Conditions
In typical applications, for optimum LED performance
Parameter
Symbol
Minimum
Maximum
Unit
Operating Ambient Temperature
Topr
-40
+85
oC
Datasheet No 292944 Issue 1
Page 2 of 11
15/04/2014
uct Information
Intensity Bin Groups
IF = 20mA, Tamb = +25oC, unless otherwise stated
Variant
Group
Luminous
Intensity Iv [1]
(mcd)
Radiant Power Range
(mW)
Typ. Luminous
Flux Φv (lm)
Min.
155
195
245
195
245
300
Max.
195
245
300
245
300
500
Min.
13
16
20
-
Max.
1A
2A
3A
2A
3A
4A
0.54
0.70
0.84
0.70
0.84
1.26
16
20
23
-
PLB111020-M
PLB111020-P
&
-
-
PLB111020-T
[1] Tolerance 10%
-
-
Forward Voltage Bin Groups
IF = 20mA, Tamb = +25oC, unless otherwise stated
Group
VF [1] (V)
Min.
2.8
2.9
3.0
3.1
3.2
3.3
Max.
2.9
3.0
3.1
3.2
3.3
3.4
V1
V2
V3
V4
V5
V6
[1] Tolerance 0.05V
Datasheet No 292944 Issue 1
Page 3 of 11
15/04/2014
uct Information
Dominant Wavelength Bin Groups
IF = 20mA, Tamb = +25oC, unless otherwise stated
Group
λd [1](nm)
Min.
Max.
452.5
455
M1
M2
M3
M4
T1
450
452.5
455
457.5
460
457.5
460
465
T2
465
470
T3
470
475
T4
475
480
[1] Tolerance 1nm
Relative Spectral Emission
Figure 1. Normalised spectral power distribution
Note: The spectrum data is taken from a random sample (for reference only)
Datasheet No 292944 Issue 1
Page 4 of 11
15/04/2014
uct Information
Angular Light Distribution
Figure 2. Angular distribution pattern of emitted light
Datasheet No 292944 Issue 1
Page 5 of 11
15/04/2014
uct Information
Forward Current Characteristics
Figure 3. Typical forward voltage versus forward current
Figure 4. Relative luminous flux versus forward current
Datasheet No 292944 Issue 1
Page 6 of 11
15/04/2014
uct Information
Temperature Characteristics
Figure 5. Relative luminous flux versus ambient temperature
Figure 6. Relative forward voltage versus ambient temperature
Datasheet No 292944 Issue 1
Page 7 of 11
15/04/2014
uct Information
Package Outline Dimensions
Figure 7. Mechanical drawings of the 3528 package
Notes:
1.
2.
All dimensions are in mm
All dimensions are to a tolerance of 0.2mm
Recommended Solder Pad
Figure 8. Diagram of soldering pad in mm
Note: Increased PCB Cu area will reduce the Tj and increase reliability
Datasheet No 292944 Issue 1
Page 8 of 11
15/04/2014
uct Information
Reflow Soldering Profile
Figure 9. Reflow soldering profile
1. Reflow soldering should not be done more than twice
2. When soldering, do not put stress on the LEDs during heating
Soldering iron
1. When hand soldering, the temperature of the iron must be ≤+300ºC for 3 seconds
2. Hand soldering should be performed only once.
Handling Instructions
Plessey LEDs are not designed to operate with reverse bias.
Precautions are required to prevent reverse bias in applications and during handling.
Moisture Sensitivity
JEDEC Level
Floor life
Conditions
Bake
Time
Time
Conditions
4
72 hours
≤+30oC / 60% RH
≥24 hours
+125oC 5oC
Datasheet No 292944 Issue 1
Page 9 of 11
15/04/2014
uct Information
Packing Information
Figure 10. Embossed taping specifications in mm [inches]
Figure 11. Reel specification (unit in mm)
Datasheet No 292944 Issue 1
Page 10 of 11
15/04/2014
uct Information
Legal Notice
Product information provided by Plessey Semiconductors Limited (“Plessey”) in this document is believed
to be correct and accurate. Plessey reserves the right to change/correct the specifications and other data
or information relating to products without notice but Plessey accepts no liability for errors that may appear
in this document, howsoever occurring, or liability arising from the use or application of any information
or data provided herein. Neither the supply of such information, nor the purchase or use of products
conveys any licence or permission under patent, copyright, trademark or other intellectual property right
of Plessey or third parties.
Products sold by Plessey are subject to its standard Terms and Conditions of Sale that are available on
request. No warranty is given that products do not infringe the intellectual property rights of third parties,
and furthermore, the use of products in certain ways or in combination with Plessey, or non-Plessey
furnished equipments/components may infringe intellectual property rights of Plessey.
The purpose of this document is to provide information only and it may not be used, applied or reproduced
(in whole or in part) for any purpose nor be taken as a representation relating to the products in question.
No warranty or guarantee express or implied is made concerning the capability, performance or suitability
of any product, and information concerning possible applications or methods of use is provided for
guidance only and not as a recommendation. The user is solely responsible for determining the
performance and suitability of the product in any application and checking that any specification or data
it seeks to rely on has not been superseded.
Products are intended for normal commercial applications. For applications requiring unusual
environmental requirements, extended temperature range, or high reliability capability (e.g. military, or
medical applications), special processing/testing/conditions of sale may be available on application to
Plessey.
Contact
Customer Support
+41752 693000 | support@plesseysemi.com
www.plesseysemi.com
Plessey Semiconductors Ltd | Plymouth
Tamerton Road, Roborough
Plymouth, Devon
Plessey Semiconductors Ltd | Swindon
Design & Technology Centre, Delta
500, Delta Business Park, Swindon
SN5 7XE United Kingdom
PL6 7BQ United Kingdom
P: +44 1752 693000
F: +44 1752 693200
P: +44 1793 518000
F: +44 1793 518030
Datasheet No 292944 Issue 1
Page 11 of 11
15/04/2014
相关型号：
©2020 ICPDF网 联系我们和版权申明