PLED150W-061-C2450-XX [ETC]
Flicker-Free LED Drivers;型号: | PLED150W-061-C2450-XX |
厂家: | ETC |
描述: | Flicker-Free LED Drivers |
文件: | 总4页 (文件大小:785K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PLED150W Series– Fixed Output & Dimmable
Flicker-Free LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
Input Over-Voltage:
Frequency:
100-277 Vac Nom. (90-305 V Min/Max)
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Current Accuracy:
Load Regulation:
THD:
>0.90 @ > 70% load, 120-277V
<60.0 Amps max @ 277Vac, cold start, full load
0.75 Amps max @ 230Vac, 1.41 A max @ 120Vac
150W
± 3%
± 4%
<_ 20% @ > 70% load, 120-277V
• Total Power: 150 Watts
Ripple & Noise:
(Vpk-pk)
5% Vo max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μF Electrolytic
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66 & NEMA6
• UL Type HL Rated for Hazardous Locations
• UL Sign Components Manual (S.A.M. Models)
Ripple:
(Ipk-pk)
5% Io max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μFElectrolytic.
120 Hz component (Flicker Free)
Start-up Time:
Leakage Current:
Hold Up Time:
Protection:
150mS typical @ Full Load, 120Vac/60Hz (1000mS max)
0.68 mA max @ 120Vac, 0.75 mA max @ 277Vac
30mS typical @ Full Load, 277Vac
Constant Current Versions - Product Specifications
Output Current Output Voltage Max Output
Typical
Power (W) Efficiency
Over-Voltage, Over-Current, and Short Circuit
(auto-recovery)
Model Number
(mA ±5%)
Range (Vdc)
142-428
111-333
95-283
72-214
48-142
36-107
29-85
PLED150W-428-C0350-XX
PLED150W-333-C0450-XX
PLED150W-283-C0530-XX
PLED150W-214-C0700-XX
PLED150W-142-C1050-XX
PLED150W-107-C1400-XX
PLED150W-085-C1750-XX
PLED150W-071-C2100-XX
PLED150W-061-C2450-XX
PLED150W-053-C2800-XX
PLED150W-048-C3150-XX
PLED150W-042-C3500-XX
PLED150W-035-C4200-XX
PLED150W-030-C4900-XX
PLED150W-024-C6250-XX
350
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
92%
92%
91%
91%
91%
91%
90%
90%
90%
90%
89%
89%
89%
88%
88%
Environmental Specifications
Minimum Starting Temp: -30ºC
450
530
700
Maximum Case Temp.
Storage Temperature:
Humidity:
90°C
1050
1400
1750
2100
2450
2800
3150
3500
4200
4900
6250
-40ºC to +85ºC
5% to 95%
Cooling:
Convection
24-71
21-61
Vibration Frequency:
MTBF:
5-55 Hz/2g, 30 minutes
18-53
260,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
16-48
14-42
EMC:
FCC 47CFR Part 15 Class B compliant
12-35
Impact Resistance:
Weight:
1g/s
10-30
24.4 oz (690 grams)
8-24
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Constant Voltage Versions - Product Specifications
Ordering Options:
Output Voltage Output Current Max Output
Typical
Efficiency
-D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output
Model Number
(Vdc ±5%)
Range (mA)
1563-6250
1225-4900
1050-4200
875-3500
788-3150
700-2800
613-2450
525-2100
438-1750
350-1400
263-1050
175-700
Power (W)
side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3.
PLED150W-024
PLED150W-030
PLED150W-035
PLED150W-042
PLED150W-048
PLED150W-053
PLED150W-061
PLED150W-071
PLED150W-085
PLED150W-107
PLED150W-142
PLED150W-214
PLED150W-283
PLED150W-333
PLED150W-428
24
150
88%
88%
•
-D3: 3-wire dimmable models dim 100-10%. Three extra wires on the output side
30
150
(Yellow/Purple/Gray). Compatible with potentiometer dimming. See page 3.
35
150
89%
-PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims
42
150
89%
via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
48
150
89%
53
150
90%
61
150
90%
71
150
90%
85
150
90%
E332160
107
142
214
283
333
428
150
91%
150
91%
150
91%
133-530
150
91%
113-450
150
92%
88-350
150
92%
Note:
•
Indicates S.A.M.
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED150W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - IN [mm]
[
]
7.2±0.047 183±1.2
[ ]
0.236 6
[ ]
0.236 6
[ ]
0.16 4
[
]
2.24±0.12 57.0±3
[
]
2.24±0.12 57.0±3
[
]
]
6.8 173
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
[
7.6 193
[
]
[
]
[
]
12.0 Min 305 Min
2.7 68.6
Tc = 90°C max
12.0 Min 305 Min
[
]
2.33 59.2
Dimming
Purple (Dim+)
Gray (Dim-)
[
]
0.39±0.04 10±1
[
]
0.39±0.04 10±1
INPUT
Black (L)
White (N)
Green/Yellow (G)
OUPUT
Red (V+)
Blue (V-)
Typical Efficiency / Load
Power Factor / Load
THD / Load
1.000
30%
100%
95%
90%
85%
80%
75%
70%
120Vac
230Vac
277Vac
0.975
0.950
0.925
0.900
0.875
0.850
0.825
0.800
25%
20%
15%
10%
5%
120Vac
230Vac
277Vac
120Vac
230Vac
277Vac
0%
40%
60%
80%
100%
40%
60%
80%
100%
40%
60%
80%
100%
Normalized Output Voltage
Load
Load
Lifetime / Case Temperature
Lifetime / Case Temperature
Lifetime / Case Temperature
85% Load @ 277Vac
Full Load @ 120Vac
90% Load @ 277Vac
140
130
120
110
100
90
140
140
130
120
110
100
90
130
120
110
100
90
80
80
80
70
70
70
60
60
60
50
50
50
40
40
40
30
30
30
20
20
20
10
10
10
0
50
0
50
0
50
55
60
65
70
75
80
85
90
55
60
65
70
75
80
85
90
55
60
65
70
75
80
85
90
Case Hotspot Temperature (°C)
Case Hotspot Temperature (°C)
Case Hotspot Temperature (°C)
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
Safety and EMC Compliance
UL8750 & CAN/CSA-22.2 No. 250.13-12, UL1012/CSA-C22.2 No.107.1
UL/CUL
CE
EN 61347-1, EN61347-2-13
FCC, 47CFR Part 15 Class B
Limits and methods of measurement of radio disturbance characteristics
of electrical lighting and similar equipment.
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61000-4-5
Part 3-2: Limits for harmonic current emissions Class C, >80% Rated Power
Part 3-3: Limitation of voltage changes, voltage fluctuations and flicker.
Part 4-5: Surge Immunity test, 2 kV L-N, 4 kV L-G & N-G
UL Conditions of Acceptability
See website for additional information
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED150W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
"-D" and "-D3" Options: 0-10VDC and Resistance Dimming
Parameters
10V Output, Yellow Wire
Minimum
9.2V
Typical
10.0V
—
Maximum
10.8V
10 Output Source Current, Yellow Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Source Current out of 0-10V Purple Wire
0mA
10mA
-2.0V
—
+15V
0mA
—
2mA
Typical Dimming Circuit
PLED150W-xxx-Cxxxx-D
3-Wire Dimming Typical Circuit
10V Output
(Yellow)
Dim (+) Purple
0-10V Input
(Purple)
IP710
Wall Dimmer
PLED150W-xxx-Cxxxx-D3
20K
Potentiometer
Dim (-) Gray
Return
(Gray)
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Input
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
Dimming Input (Vdc)
Notes:
1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
2. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent
3. 0-10V dimmable version is not intended to dim to zero (off). Will be Iout <10% @ Vdim <1.0V
4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED150W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
"-PD" Option: PWM Dimming
Parameters
Minimum
-2.0V
-2.0
Typical
10V
0V
Maximum
+15V
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Current into PWM Input (Purple Wire)
Source Current out of PWM Input (Purple Wire)
PWM Input Signal Frequency
+5.5V
+9.0
10V
—
+15V
0mA
1.2mA
2mA
0mA
—
500Hz
0%
—
1500Hz
100%
PWM Input Signal Positive Duty Cycle
10-90%
PWM Positive Dimming Typical Circuit
PWM (+) Purple
PLED150W-xxx-Cxxxx-PD
PWM In
Return (-) Gray
Output Current / 1.0 kHz Positive Duty Cycle
100
90
80
70
60
50
40
30
20
10
0
0%
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
Positive Duty Cycle
Notes:
1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
相关型号:
©2020 ICPDF网 联系我们和版权申明