PLED60W-024 [ETC]
Flicker-Free LED Dr;
| 型号： | PLED60W-024 |
| 厂家： | 
ETC |
| 描述： | Flicker-Free LED Dr |
| 文件： | 总4页 (文件大小：770K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PLED60W Series– Fixed Output & Dimmable
Flicker-Free LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
Input Over-Voltage:
Frequency:
100-277 Vac Nom. (90-305 V Min/Max)
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ 75-100% load, 100-277Vac
<50.0 Amps max @ 277Vac, cold start 25ºC
0.80 Amps max
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Current Regulation:
Load Regulation:
THD:
60W
± 3% Over input line variation
± 4%
<_ 20% @ 75-100% load, 100-277Vac
• Smallest Footprint Driver for this wattage
• Total Power: 60 Watts
Ripple & Noise:
(Vpk-pk)
5% Vo max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μF Electrolytic
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66 & NEMA6
Ripple:
(Ipk-pk)
5% Io max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μFElectrolytic.
120 Hz component (Flicker Free)
• UL Type HL Rated for Hazardous Locations
• UL Sign Components Manual Models Available
Start-up Time:
200mS typical @ Full Load, 120Vac/60Hz (1000mS max)
0.28 mA max @ 120Vac, 0.78 mA max @ 277Vac
40mS typical @ Full Load, 277Vac
Leakage Current:
Hold Up Time:
Constant Current Versions - Product Specifications
Output Protection:
Over-Voltage, Over-Current, and
Short Circuit with auto-recovery
Output Current Output Voltage Max. Output
Max
Model Number
Efficiency
(mA ±3%)
280
Range (Vdc)
72-214
56-166
36-108
24-72
18-54
16-48
14-42
12-36
9-27
Power (W)
PLED60W-214-C0280-XX
PLED60W-166-C0360-XX
PLED60W-108-C0550-XX
PLED60W-072-C0850-XX
PLED60W-054-C1100-XX
PLED60W-048-C1250-XX
PLED60W-042-C1450-XX
PLED60W-036-C1670-XX
PLED60W-027-C2250-XX
PLED60W-024-C2500-XX
PLED60W-020-C3000-XX
PLED60W-015-C4000-XX
PLED60W-012-C5000-XX
60
60
60
60
60
60
60
60
60
60
60
60
60
91%
91%
90%
90%
88%
88%
86%
86%
85%
85%
84%
84%
84%
Environmental Specifications
Minimum Starting Temp: -30ºC
360
550
Maximum Case Temp.
Storage Temperature:
Humidity:
90°C
850
-40ºC to +85ºC
5% to 95%
Convection
5 to 55 Hz/2g, 30 minutes
Class A
1100
1250
1450
1670
2250
2500
3000
4000
5000
Cooling:
Vibration Frequency:
Sound Rating:
Impact Resistance:
MTBF:
8-24
1g/s
7-20
474,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
5-15
4-12
EMC:
FCC 47CFR Part 15 Class B compliant
19 oz. (538 g)
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Weight:
Constant Voltage Versions - Product Specifications
Ordering Options:
Output Voltage Output Current Max. Output
Max
-D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output
Model Number
Efficiency
(Vdc ±5%)
Range (mA)
1563-5000
1250-4000
938-3000
783-2500
700-2250
525-1670
448-1450
390-1250
350-1200
263-850
Power (W)
side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3.
12
60
60
60
60
60
60
60
60
60
60
60
60
60
84%
84%
PLED60W-012
•
-D3: 3-wire dimmable models dim 100-10%. Three extra wires on the output side
PLED60W-015
PLED60W-020
15
(Yellow/Purple/Gray). Compatible with potentiometer dimming. See page 3.
20
84%
-PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims
24
85%
PLED60W-024
PLED60W-027
PLED60W-036
PLED60W-042
PLED60W-048
PLED60W-054
PLED60W-072
PLED60W-108
PLED60W-166
PLED60W-214
via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
•
27
85%
36
86%
42
86%
48
88%
E332160
54
88%
72
90%
108
166
214
175-550
90%
113-360
91%
88-280
91%
•
Indicates S.A.M.
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Class 2:
US/Canada
US Only
Specifications subject to change without notice.
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED60W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - IN [mm]
[
]
5.51 ±0.047 140.0 ±1.2
[ ]
0.236 6
[ ]
0.236 6
[ ]
0.16 4
[
]
2.24±0.12 57.0±3
[
]
2.24±0.12 57.0±3
WIRE SPECS:
[
]
]
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
5.1 130
[
5.91 150
[
]
[
]
2.6 65
[
]
[
]
12.0 Min 305 Min
12.0 Min 305 Min
2.33 59.2
Tc = 90°C max
Dimming
Purple (Dim+)
Gray (Dim-)
[
]
0.39±0.04 10±1
[
]
0.39±0.04 10±1
INPUT
Black (ACL)
OUPUT
Red (V+)
Blue (V-)
White (ACN)
Green/Yellow (GND)
Typical Efficiency / Load
Power Factor / Load
THD / Load
1.000
30%
100%
95%
90%
85%
80%
75%
70%
120Vac
230Vac
277Vac
0.950
0.900
0.850
0.800
0.750
0.700
25%
20%
15%
10%
5%
120Vac
230Vac
277Vac
120Vac
230Vac
277Vac
0%
40%
60%
80%
100%
40%
60%
80%
100%
40%
60%
80%
100%
Normalized Output Voltage
Load
Load
Lifetime / Case Temperature
Safety and EMC Compliance
Full Load @ 120Vac
UL8750 & CAN/CSA-22.2 No. 250.13-12, UL1310/CSA-C22.2 No.223-M91,
UL1012/CSA-C22.2 No.107.1 for Non-Class 2
140
130
120
110
100
90
UL/CUL
CE
EN 61347-1, EN61347-2-13
FCC, 47CFR Part 15 Class B
Limits and methods of measurement of radio disturbance characteristics
EN 55015
80
70
of electrical lighting and similar equipment.
EN 61000-3-2
EN 61000-3-3
EN 61000-4-5
Part 3-2: Limits for harmonic current emissions Class C, >80% Rated Power
Part 3-3: Limitation of voltage changes, voltage fluctuations and flicker.
Part 4-5: Surge Immunity test, 2 kV L-N, 4 kV L-G & N-G
60
50
40
30
20
10
0
50
55
60
65
70
75
80
85
90
Case Hotspot Temperature (°C)
Note:
UL Conditions of Acceptability
See website for additional information
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED60W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
"-D" and "-D3" Options: 0-10VDC and Resistance Dimming
Parameters
10V Output, Yellow Wire
Minimum
9.2V
Typical
10.0V
—
Maximum
10.8V
10 Output Source Current, Yellow Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Source Current out of 0-10V Purple Wire
0mA
10mA
-2.0V
—
+15V
0mA
—
2mA
Typical Dimming Circuit
3-Wire Dimming Typical Circuit
10V Output (Yellow)
Dim (+) Purple
0-10V Input (Purple)
Return (Gray)
20K
Potentiometer
PLED60W-xxx-Cxxxx-D
IP710 Wall Dimmer
Dim (-) Gray
PLED60W-xxx-Cxxxx-D3
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Input
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
Dimming Input (Vdc)
Notes:
1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
2. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent
3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V
4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
5. 3-wire dimmable drivers come with three wires on the output side (Yellow/Purple/Gray).
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED60W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
"-PD" Option: PWM Dimming
Parameters
Minimum
-2.0V
-2.0
Typical
10V
Maximum
+15V
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Sink Current into PWM Input (Purple Wire)
PWM Input Signal Frequency
0V
+5.5V
+9.0
10V
15V
0mA
—
1.2mA
1500Hz
100%
500Hz
0%
—
PWM Input Signal Positive Duty Cycle
10-90%
PWM Positive Dimming Typical Circuit
PWM (+) Purple
PLED60W-xxx-Cxxxx-PD
PWM In
PWM (-) Gray
Output Current / 1.0 kHz Positive Duty Cycle
100
90
80
70
60
50
40
30
20
10
0
0%
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
Positive Duty Cycle
Notes:
1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.
3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
相关型号：
©2020 ICPDF网 联系我们和版权申明