PLED75W-072 [ETC]
Flicker-Free LED Drivers;PLED75W Series– Fixed Output & Dimmable
Flicker-Free LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
Input Over-Voltage:
Frequency:
100-277 Vac Nom. (90-305 V Min/Max)
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ 75-100% load, 100-277Vac
<30.0 Amps max @ 230Vac, cold start 25ºC
1.00 Amps max
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Current Regulation:
Load Regulation:
THD:
75W
± 2% Over input line variation
± 3%
• Smallest Footprint Driver for this wattage
• Total Power: 75 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66 & NEMA6
<_ 20% @ 60-100% load, 100-277Vac
Ripple & Noise:
(Vpk-pk)
5% Vo max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μF Electrolytic
Ripple:
(Ipk-pk)
5% Io max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μFElectrolytic.
120 Hz component (Flicker Free)
• UL Type HL Rated for Hazardous Locations
• UL Sign Components Manual (S.A.M. Models)
Start-up Time:
200mS typical @ Full Load, 120Vac/60Hz (1000mS max)
0.28 mA max @ 120Vac, 0.78 mA max @ 277Vac
40mS typical @ Full Load, 277Vac
Leakage Current:
Hold Up Time:
Constant Current Versions - Product Specifications
Output Current Output Voltage Max. Output
Max
Model Number
Efficiency
(mA ±3%)
350
Range (Vdc)
72-214
56-166
36-108
36-108
24-72
18-54
16-48
14-42
12-36
9-27
Power (W)
75
Output Protection:
Over-Voltage, Over-Current, and
Short Circuit Protection
PLED75W-214-C0350-XX
PLED75W-166-C0450-XX
PLED75W-108-C0530-XX
PLED75W-108-C0700-XX
PLED75W-072-C1050-XX
PLED75W-054-C1400-XX
PLED75W-048-C1560-XX
PLED75W-042-C1790-XX
PLED75W-036-C2100-XX
PLED75W-027-C2800-XX
PLED75W-024-C3130-XX
PLED75W-020-C3750-XX
PLED75W-015-C5000-XX
PLED75W-012-C6250-XX
92%
92%
92%
92%
91%
91%
90%
89%
89%
88%
88%
87%
86%
86%
450
75
Environmental Specifications
Minimum Starting Temp: -30ºC
530
57.2
75
700
Maximum Case Temp.
Storage Temperature:
Humidity:
90°C
1050
1400
1560
1790
2100
2800
3130
3750
5000
6250
75
-40ºC to +85ºC
5% to 95%
Convection
5 to 55 Hz/2g, 30 minutes
Class A
75
75
75
Cooling:
75
Vibration Frequency:
Sound Rating:
Impact Resistance:
MTBF:
75
8-24
75
1g/s
7-20
75
5-15
75
474,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
4-12
75
EMC:
FCC 47CFR Part 15 Class B compliant
19 oz. (538 g)
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Weight:
Constant Voltage Versions - Product Specifications
Ordering Options:
Output Voltage Output Current Max. Output
Max
Model Number
-D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output
Efficiency
(Vdc ±5%)
Range (mA)
1563-6250
1250-5000
938-3750
783-3130
700-2800
525-2100
448-1790
390-1560
350-1400
263-1050
175-700
Power (W)
side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3.
PLED75W-012
12
75
75
75
75
75
75
75
75
75
75
75
75
75
86%
86%
•
-D3: 3-wire dimmable models dim 100-10%. Three extra wires on the output side
PLED75W-015
PLED75W-020
PLED75W-024
PLED75W-027
PLED75W-036
PLED75W-042
PLED75W-048
PLED75W-054
PLED75W-072
PLED75W-108
PLED75W-166
PLED75W-214
15
(Yellow/Purple/Gray). Compatible with potentiometer dimming. See page 3.
20
87%
-PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims
24
88%
•
via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
27
88%
36
89%
42
89%
48
90%
54
91%
E332160
72
91%
108
166
214
92%
113-450
92%
88-350
92%
•
Indicates S.A.M.
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Class 2:
US/Canada
US Only
Specifications subject to change without notice.
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED75W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - IN [mm]
[
]
5.51 ±0.047 140.0 ±1.2
[ ]
0.236 6
[ ]
0.236 6
[ ]
0.16 4
[
]
2.24±0.12 57.0±3
[
]
2.24±0.12 57.0±3
WIRE SPECS:
[
]
]
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
5.1 130
[
5.91 150
[
]
[
]
2.6 65
[
]
[
]
12.0 Min 305 Min
12.0 Min 305 Min
2.33 59.2
Tc = 90°C max
Dimming
Purple (Dim+)
Gray (Dim-)
[
]
0.39±0.04 10±1
[
]
0.39±0.04 10±1
INPUT
Black (ACL)
OUPUT
Red (V+)
Blue (V-)
White (ACN)
Green/Yellow (GND)
Typical Efficiency / Load
Power Factor / Load
THD / Load
1.000
30%
100%
95%
90%
85%
80%
75%
70%
120Vac
230Vac
277Vac
0.950
0.900
0.850
0.800
0.750
0.700
25%
20%
15%
10%
5%
120Vac
230Vac
277Vac
120Vac
230Vac
277Vac
0%
40%
60%
80%
100%
40%
60%
80%
100%
40%
60%
80%
100%
Normalized Output Voltage
Load
Load
Safety
Certification
Lifetime / Case Temperature
Standard
Full Load @ 120Vac
140
130
120
110
100
90
UL8750 & CAN/CSA-22.2 No. 250.13-12, UL1310/CSA-C22.2 No.223-M91
for Class 2, UL1012/CSA-C22.2 No.107.1 for Non-Class 2
UL/CUL
CE
EN 61347-1, EN61347-2-13
EMC Standard
Notes
80
70
FCC, 47CFR Part 15 Class B
Limits and methods of measurement of radio disturbance characteristics
of electrical lighting and similar equipment.
60
50
EN 55015
40
30
20
10
EN 61000-3-2
EN 61000-3-3
EN 61000-4-5
Part 3-2: Limits for harmonic current emissions Class C, >80% Rated Power
Part 3-3: Limitation of voltage changes, voltage fluctuations and flicker.
Part 4-5: Surge Immunity test, 2 kV L-N, 4 kV L-G & N-G
0
50
55
60
65
70
75
80
85
90
Case Hotspot Temperature (°C)
Note:
UL Conditions of Acceptability
See website for additional information
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED75W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
"-D" and "-D3" Options: 0-10VDC and Resistance Dimming
Parameters
10V Output, Yellow Wire
Minimum
9.2V
Typical
10.0V
—
Maximum
10.8V
10 Output Source Current, Yellow Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Source Current out of 0-10V Purple Wire
0mA
10mA
-2.0V
—
+15V
0mA
—
2mA
Typical Dimming Circuit
3-Wire Dimming Typical Circuit
10V Output (Yellow)
Dim (+) Purple
0-10V Input (Purple)
Return (Gray)
20K
Potentiometer
PLED75W-xxx-Cxxxx-D
IP710 Wall Dimmer
Dim (-) Gray
PLED75W-xxx-Cxxxx-D3
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Input
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
Dimming Input (Vdc)
Notes:
1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
2. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent
3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V
4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
5. 3-wire dimmable drivers come with three wires on the output side (Yellow/Purple/Gray).
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED75W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
"-PD" Option: PWM Dimming
Parameters
Minimum
-2.0V
-2.0
Typical
10V
Maximum
+28V
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Sink Current into PWM Input (Purple Wire)
PWM Input Signal Frequency
0V
+7.5V
+9.0
10V
28V
0mA
—
1.2mA
1000Hz
100%
200Hz
0%
—
PWM Input Signal Positive Duty Cycle
10-90%
PWM Positive Dimming Typical Circuit
PWM (+) Purple
PLED75W-xxx-Cxxxx-PD
PWM In
PWM (-) Gray
Output Current / 1.0 kHz Positive Duty Cycle
100
90
80
70
60
50
40
30
20
10
0
0%
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
Positive Duty Cycle
Notes:
1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.
3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
相关型号:
©2020 ICPDF网 联系我们和版权申明