PLED96W-025-C3840-XX-HV [ETC]
Flicker-free, Hazardous Location LED Drivers;![PLED96W-025-C3840-XX-HV](http://pdffile.icpdf.com/pdf2/p00322/img/icpdf/PLED96W-018-_1982487_icpdf.jpg)
型号: | PLED96W-025-C3840-XX-HV |
厂家: | ![]() |
描述: | Flicker-free, Hazardous Location LED Drivers |
文件: | 总4页 (文件大小:810K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
PLED-96W-HV Series– High Voltage
Flicker-free, Hazardous Location LED Drivers
Constant Current, Dimmable & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
277-480 Vac Nom. (XX-512 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Current Regulation:
Load Regulation:
THD:
>0.90 @ 60% load 277V-347V, 80% load 480V
<30.0 Amps max @ 277 Vac, cold start 25ºC
0.45 Amps max
96W
± 3% Over input line variation
± 4%
• Total Power: 96 Watts
<_ 20% @ 60% load, 277V through 480V
• Input Voltage: 277-480 Vac Nom.
• UL Dry & Damp Location Rated
• UL Type HL
Ripple & Noise:
(Vpk-pk)
5% Vo max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μF Electrolytic
• IP66 & NEMA6
• High Power Factor
• UL Type HL Rated for Hazardous Locations
Ripple:
(Ipk-pk)
5% Io max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μFElectrolytic.
120 Hz component (Flicker Free)
Start-up Time:
200mS typical @ Full Load, 120Vac/60Hz (1000mS max)
Constant Current Versions - Specifications
Leakage Current:
Hold Up Time:
700μA typical
Half cycle
Output Current Output Voltage Max. Output
Max
Efficiency
Model Number
(mA ±5%)
350
Range (Vdc)
92-274
71-213
46-137
31-92
23-69
18-54
16-48
16-46
14-39
12-36
12-34
10-30
9-27
Power (W)
96
Output Protection:
Over-Voltage, Over-Current, and Short Circuit Protection
with Auto Recovery, plus internal thermal protection
PLED96W-274-C0350-XX-HV
PLED96W-213-C0450-XX-HV
PLED96W-137-C0700-XX-HV
PLED96W-092-C1050-XX-HV
PLED96W-069-C1400-XX-HV
PLED96W-054-C1750-XX-HV
PLED96W-048-C2000-XX-HV
PLED96W-046-C2100-XX-HV
PLED96W-039-C2450-XX-HV
PLED96W-036-C2660-XX-HV
PLED96W-034-C2800-XX-HV
PLED96W-030-C3150-XX-HV
PLED96W-027-C3500-XX-HV
PLED96W-025-C3840-XX-HV
PLED96W-024-C4000-XX-HV
PLED96W-020-C4800-XX-HV
PLED96W-018-C5350-XX-HV
88%
88%
86%
86%
86%
85%
85%
85%
84%
84%
84%
84%
83%
83%
81%
81%
81%
450
96
Environmental Specifications
Minimum Starting Temp: -30ºC
700
96
1050
1400
1750
2000
2100
2450
2660
2800
3150
3500
3840
4000
4800
5350
96
96
Maximum Case Temp.
Storage Temperature:
Humidity:
90°C
96
-40ºC to +85ºC
5% to 95%
Convection
5 to 55 Hz/2g, 30 minutes
Class A
96
96
Cooling:
96
96
Vibration Frequency:
Sound Rating:
Impact Resistance:
MTBF:
96
96
1g/s
96
474,000 Hours @ full load and 40ºC ambient conditions
per MIL-217F Notice 2
9-25
96
8-24
96
EMC:
FCC 47CFR Part 15 Class B compliant
32.1 oz. (910 grams)
7-20
96
Weight:
6-18
96
-XX indicates dimming options are available. See options below. Blank = fixed current output
Ordering Options:
Constant Voltage Versions - Specifications
-D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output
Output Voltage Output Current Max. Output
Max
Model Number
side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3.
Efficiency
(Vdc ±5%)
Range (mA)
1338-5350
1200-4800
1000-4000
960-3840
875-3500
788-3150
700-2800
665-2660
613-2450
525-2100
500-2000
438-1750
350-1400
263-1050
175-700
Power (W)
-D3: 3-wire dimmable models dim 100-10%. Three extra wires on the output side
PLED96W-018-HV
PLED96W-020-HV
PLED96W-024-HV
PLED96W-025-HV
PLED96W-027-HV
PLED96W-030-HV
PLED96W-034-HV
PLED96W-036-HV
PLED96W-039-HV
PLED96W-046-HV
PLED96W-048-HV
PLED96W-054-HV
PLED96W-069-HV
PLED96W-092-HV
PLED96W-137-HV
PLED96W-213-HV
PLED96W-274-HV
18
96
81%
81%
81%
83%
83%
84%
84%
84%
84%
85%
85%
85%
86%
86%
86%
88%
88%
(Yellow/Purple/Gray). Compatible with potentiometer dimming. See page 3.
20
96
-PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims
24
96
via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
25
96
27
96
30
96
34
96
36
96
39
96
46
96
E332160
48
96
54
96
69
96
92
96
137
213
274
96
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
113-450
96
88-350
96
Class 2:
US/Canada
US Only
Specifications subject to change without notice.
Rev 8-26-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED96W-HV Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - mm
[
]
8.92±0.047 227±1.2
[ ]
0.236 6
[ ]
0.236 6
[ ]
0.16 4
[
]
2.24±0.12 57.0±3
[
]
2.24±0.12 57.0±3
[
]
8.54 217
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
[
]
9.34 237.3
[
]
[
]
[
]
12.0 Min 305 Min
4.0 102
12.0 Min 305 Min
[
]
2.33 59.2
Tc=90°C
Dimming
Purple (Dim+)
Gray (Dim-)
[
]
0.39±0.04 10±1
[
]
0.39±0.04 10±1
INPUT
Black (L)
OUPUT
Red (V+)
Blue (V-)
White (N)
Green/yellow (G)
Power Factor / Load
THD / Load
1.000
0.950
0.900
0.850
0.800
0.750
30%
25%
20%
15%
10%
5%
277Vac
347Vac
380Vac
480Vac
277Vac
347Vac
380Vac
480Vac
0.700
40%
0%
60%
80%
100%
40%
60%
80%
100%
Load
Load
Lifetime / Case Temperature
Full Load @ 120Vac
Typical Efficiency / Load
140
130
120
110
100
90
80
70
60
50
100%
95%
90%
85%
80%
75%
70%
277Vac
347Vac
380Vac
480Vac
40
30
20
10
0
40%
60%
80%
100%
50
55
60
65
70
75
80
85
90
Normalized Output Voltage
Case Hotspot Temperature (°C)
Note:
Safety and EMC Compliance
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
UL8750 Type HL
CSA-C22.2
EN61347
EN61000-3-2, EN61000-3-3 Class C,
EN61000-4-5: 3kV-6kV 8-20 μsec surge protection.
FCC 47CFR Part 15 Class B compliant
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED96W-HV Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
"-D" Option: 0-10VDC and Resistance Dimming
Parameters
10V Output, Yellow Wire
Minimum
9.2V
Typical
10.0V
—
Maximum
10.8V
Absolute Voltage Range on 0-10V (+) Purple Wire
Source Current out of 0-10V Purple Wire
-2.0V
+15V
0mA
—
2mA
Typical Dimming Circuit
Dim (+) Purple
PLED96W-xxx-Cxxxx-D-HV IP710 Wall Dimmer
Dim (-) Gray
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Input
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
Dimming Input (Vdc)
Notes:
1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
2. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent
3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V
4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
PLED96W-HV Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
"-PD" Option: PWM Dimming
Parameters
Minimum
-2.0V
Typical
10V
Maximum
+15V
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Sink Current into PWM Input (Purple Wire)
PWM Input Signal Frequency
-2.0V
0V
+5.5V
+9.0V
0mA
10V
15V
—
1.2mA
1500Hz
100%
500Hz
0%
—
PWM Input Signal Positive Duty Cycle
10-90%
PWM Positive Dimming Typical Circuit
PWM (+) Purple
PWM In
Sink
PLED96W-xxx-Cxxxx-PD-HV
PWM (-) Gray
Output Current / 1.0 kHz, Positive Duty Cycle
100
90
80
70
60
50
40
30
20
10
0
0%
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
Positive Duty Cycle
Notes:
1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.
2. PWM dimmable version is not intended to dim below 5% @ 0% Duty Cycle, or 10% @ 10% Duty Cycle.
3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
相关型号:
©2020 ICPDF网 联系我们和版权申明