PMODI2S_RM [ETC]

PmodII2s Refference Manuall; PmodII2s REFFERENCE手册册
PMODI2S_RM
型号: PMODI2S_RM
厂家: ETC    ETC
描述:

PmodII2s Refference Manuall
PmodII2s REFFERENCE手册册

文件: 总1页 (文件大小:211K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PmodI2s Reference Manual  
1300 NE Henley Court, Suite 3  
Pullman, WA 99163  
(509) 334 6306 Voice | (509) 334 6300 Fax  
Revision: December 21, 2010  
Overview  
The Digilent PmodI2S is a peripheral module  
that provides a D/A converter allowing for high  
quality stereo sound from a digital source. This  
module provides an easy interface for  
converting digital samples into an analog  
signal with a wide arrange of sample rates and  
a large dynamic range.  
Features include:  
Cirrus Logic CS4344 Stereo D/A  
converter  
1/8-inch stereo headphone jack  
6-pin header PmodTM interface  
connector  
3V-5V operating voltage  
Small form factor (.8” x 1.15”)  
Functional Description  
Power Supply  
The PmodI2S is designed to work with either  
Digilent programmable logic or Digilent  
embedded control system boards that have 6  
or 12-pin header connectors into which the  
PmodI2S will connect directly.  
The Digilent PmodI2S contains a Cirrus Logic  
CS4344 stereo D/A converter that supports all  
major audio data interface formats and allows  
16 to 24 bits of audio data at standard audio  
sample rates, including 48, 96 and 192 Khz.  
The PmodI2S requires a 3V-5V supply voltage.  
This power supply voltage (3.3V) is available  
on all Digilent system boards and is provided  
as part of the Pmod interface. Digilent system  
boards that provide Pmod interface connectors  
allow jumper selection of the power supply  
voltage being provided to the Pmod. Ensure  
that the system board is jumpered to provide  
3.3V to the module before applying power to  
the board.  
Interface  
The PmodI2S runs off a master clock (MCLK)  
input that can be set from 500khz to 50Mhz.  
Audio data is supplied to the serial data input  
(SDIN) where it is clocked in by an optional  
serial clock (SCLK). If the SCLK is left de-  
asserted, the CS4344 will automatically set the  
sample rate based on the MCLK and LRCK.  
Either way the LRCK will control which channel  
is currently being read by the CS4344.  
For more information about the operational  
features and timing diagrams of the Cirrus  
CS4344 please refer to the CS4344 Data  
Sheet  
Copyright Digilent, Inc.  
1 pages  
Doc: 502-191  

相关型号:

PMODIA_RM

Digilent PmodIA™ Impedance Analyzer Reference Manual
ETC

PMODJSTK

The PmodJSTK was designed to be a versatile user interface that can be used in a wide variety of projects.
ETC

PMODLS1

Infrared Light Detector Module Reference Manual
ETC

PMODOD1

Digilent PmodOD1™ Open Drain Output Module Board Reference Manual
ETC

PMODOLED_RM

PmodOLED™ Reference Manuall
ETC

PMODPMON1

PmodPMON1™ Refference Manuall
ETC

PMODR2R

The PmodR2R board provides digital-to-analog conversion using a circuit that has been a staple in engineering design for decades.
ETC

PMODRJ45

PmodRJ45™ Connector Modules Reference Manual
ETC

PMODSD_RM

The PmodSD Secure Digital memory card module provides a convenient SD card slot for use with Digilent system and microcontroller boards.
ETC

PMODTMP2

PmodTMP2™ Reference Manuall
ETC

PMODTPH

Digilent PmodTPH Test Point Header Board Reference Manual
ETC

PMODUSBUART_RM

PmodUSBUART™ Reference Manuall
ETC