PT500-U2ABFHPHN [ETC]
Analog IC ; 模拟IC\n
| 型号： | PT500-U2ABFHPHN |
| 厂家： | 
ETC |
| 描述： | Analog IC
|
| 文件： | 总4页 (文件大小：91K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product Data Sheet
500 WATT
AC/DC POWER SUPPLY
PT500
DESCRIPTION
The PT500 Series is a family of compact, fully featured,
multiple-output 500W power supplies with a 3.3V main output.
These high-current, 3.3V output platforms will support
requirements in which the logic has largely migrated from 5V
to 3.3V. With active Power Factor Correction (PFC) to EN61000-
3-2, wide-range input of 90-264VAC, EMI compliance to FCC
and VDE Class B, and “CE” Marking, the PT500 Series is
ideal for systems targeting worldwide markets. The complement
of standard features includes remote sense compensation, output
voltage adjustment, remote inhibit, power fail warning, and
thermal shutdown. All outputs are fully isolated and regulated.
A complete array of output voltage configurations is available
to handle a broad range of applications. Available options
include a cover with integral fan and active current sharing for
redundant applications.
FEATURES
l Active Power Factor Correction
l 3.3V Main Output
l High Surge Current Auxiliary Outputs
l Fully Isolated Outputs
l One, Two, Three or Four Output Models
l N + 1 Current Sharing
l FCC/VDE Class B EMI Filter Standard
l Fast Transient Response
AGENCY APPROVALS
l Optional Cover With Fan
Internet: http://www.cdpowerelectronics.com
Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Phone: 800.547.2537 Fax: 520.770.9369
Power Electronics Division, Europe
C&D Technologies (Power Electronics) Ltd.
132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland
Tel: +353.61.474.133
Fax:+353.61.474.141
PT500 4/99 REV A
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Page 1
Input Specifications
Parameters
Conditions
Min
Typ
Max
264
8
Units
VAC
A
Operating Range
Input Current
47-63Hz
90
Nominal line, full load
120VAC, 250C, cold start
240VAC, 250C, cold start
Nominal line, full load
Full load
Inrush Current
30
Apk
Apk
%
70
Efficiency
70
Holdup
20
msec
Power Factor (1)
Full load
0.99
Notes: (1) Harmonic currents meet EN61000-3-2
Output Voltages and Maximum Rated Loads
OUTPUT #1
OUTPUT #2
OUTPUT #3
OUTPUT #4
MODEL NUMBER
PT500-U1A
PT500-U2A
PT500-U2B
PT500-U3A
PT500-U3B
PT500-U4C
PT500-U4D
PT500-U4E
PT500-U4F
PT500-U4G
PT500-U4H
PT500-U4I
VOUT
± 3.3V
± 3.3V
± 3.3V
±3.3V
±3.3V
±3.3V
±3.3V
±3.3V
±3.3V
±3.3V
±3.3V
±3.3V
±3.3V
±3.3V
±3.3V
IMAX
80A
80A
80A
80A
80A
80A
80A
80A
80A
80A
80A
80A
80A
80A
80A
VNOM IMAX/IPK
VNOM IMAX/IPK
VNOM IMAX/IPK
± 12V 12A/15A
± 15V 12A/15A
± 12V 12A/15A
± 15V 12A/15A
± 5V 12A/15A
± 5V 12A/15A
± 12V 12A/15A
± 5V 12A/15A
± 5V 12A/15A
± 5V 12A/15A
± 5V 12A/15A
± 12V 12A/15A
± 15V 12A/15A
± 12V 12A/15A
± 12V 12A/15A
± 12V 12A/15A
± 15V 12A/15A
± 15V 12A/15A
± 12V 12A/15A
± 15V 12A/15A
-
-
-
-
± 12V
± 24V
± 5V
± 15V
± 24V
4.0A
3.0A
4.0A
4.0A
3.0A
± 5.2V 10.0A
± 12V
± 5V
± 5V
± 12V
4.0A
10.0A
4.0A
PT500-U4J
PT500-U4K
PT500-U4L
± 24V
± 5V
± 12V
4A
± 24V
± 12V
± 12V
4A
15A
12A
12A
12A
4.0A
Note: Peak current ratings are for 10sec maximum. Total power not to exceed 500 watts.
Output Specifications
Parameter
Conditions
Min
Typ
Max
Units
Watts
%
Output Power
All environmental and line conditions
500
Voltage Adjustment Range Relative to nominal output voltage, all outputs
+ 5
Output Regulation
Line
+ 0.1
+ 0.5
+ 0.1
%
Load
%
Cross
%
Minimum Load
PARD
Output #1
4
A
V1, at output terminals, 20MHz B/W
Auxiliary Outputs
50
1
mVp-p
% pk-pk
Temperature Coefficient
00 to 500C, after 30 minute warm-up
+ 0.02
%/0C
Environmental Specifications
Parameter
Conditions
Min
Typ
Max
Units
Ambient Temperature
Operating output de-rated linearly to 50%
of rated capacity between 500C and 700C
Non-operating
0
+70
0C
-20
+85
0C
Altitude
Operating
+10,000
+50,000
Feet
Feet
Non-operating
Shock
Per MIL-STD-810D, Method 516.3, Procedure I
Per MIL-STD-810D, Method 514.3, Procedure I
Vibration
Cooling
The PT500 is designed for full load operation in a 50°C ambient with 40 CFM airflow.
Page 2
Powered by ICminer.com Electronic-Library Service CopyRight 2003
PT500 4/99 REV A
Product Features
Features
Characteristic
Remote Sense
0.5V compensation, Output V1
Active Current Sharing Option
Cover w/Integral Fan
OVP
Single Wire; 1% of max rated load
Optional on all models
4.3V +0.5V, Output V1, latching
Overcurrent Protection
Thermal Shutdown
Power Fail Warning Signal (H)
Remote Inhibit (H)
All outputs individually current limited with automatic recovery
Automatic Restart
Transition to Logic “0” at least 10msec before loss of output regulation
Logic “0” applied will inhibit output (referenced to –Sense terminal)
Product Compliances
Approval
Characteristic
UL
UL1950 and UL1012, File No. E14675
C22.2 No. 234-M90, Level 6. File No. LR9070-154C
EN60950, License No. R9576030
Class B requirements for conducted emissions
Class B requirements for conducted emissions
Harmonic Currents, Class A
CSA
TUV
FCC, Part 15
VDE
EN61000-3-2
CE Mark
Low Voltage Directive
Ordering Information
Model Designation (1)
PT500
BASE MODEL
Chassis: “U” = unfinned, “M” = modified
Number of Outputs (1,2,3 or 4)
Output Voltage: See chart on facing page
Input Filter: “B” designates Class B EMI filter (standard feature)
Cover: “C” = plain cover, “F” = top mounted fan, “N” = no cover (2)
Remote Inhibit: “H” designates that Logic “0” applied inhibits output (standard configuration)
Input: “P” designates Power Factor Corrected wide range (90-264VAC) input (standard feature)
Power Fail Warning: “H” designates transition to Logic “0” upon loss of AC (standard configuration)
Active Current Share: “M” designates current sharing on main output (V1) (standard feature)
NOTES: (1) Standard configurations shown; consult factory for other available options
(2) Cover required to meet EMI specification
The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES
assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to
change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize
or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications.
PT500 4/99 REV A
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Page 3
Mechanical
0.063
COVER
B2
J9
Return
Maximum depth of mounting screws is 0.156”
NOTES:
All dimensions are in inches
FAN MOUNTED ON COVER ADDS 1.30”.
COOLING: The PT500 is designed to operate with 40 CFM airflow.
SHOCK ANDVIBRATION: The PT500 family meets the requirements of MIL STD-810D. (Vibration-Method 514.3 Pocedure I; Shock-Method 516.3 Procedure I).
WEIGHT: Approximately 4 lbs.
J9 Connector
J9 Connector
Terminal Block 1
Terminal Block 2
PIN
FUNCTION
Molex No.
22-28-1050
POS
FUNCTION
Ground
POS
FUNCTION
-V4
1
2
3
4
5
- Sense
+ Sense
Connector
1
2
3
1
2
3
4
5
6
AC Neutral
AC Line
+V4
Current Share
Remote Inhibit
Power Fail
-V3
+V3
-V2
+V2
The information provided herein is believed to be reliable; however, C&D Technologies assumes no responsibility for inaccuracies or omissions. C&D Technologies assumes no
responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent
rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D Technologies does not authorize or warrant any C&D Technologies product for use
in life support devices/systems or in aircraft control applications. C&D Technologies, Iso-ThermoFlex and T.E.A.M. Q are trademarks of C&D Technologies Corporation.
Page 4
PT500 4/99 REV A
Powered by ICminer.com Electronic-Library Service CopyRight 2003
相关型号：
©2020 ICPDF网 联系我们和版权申明