PT78NR105 [ETC]
(-)5Vout 1Amp Wide-Input Plus to Minus Voltage ISR ; ( - ) 5Vout 1Amp宽输入正至负电压ISR\n型号: | PT78NR105 |
厂家: | ETC |
描述: | (-)5Vout 1Amp Wide-Input Plus to Minus Voltage ISR
|
文件: | 总3页 (文件大小:180K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PT78NR100 Series
1 Amp Plus to Minus Voltage
Integrated Switching Regulator
SLTS058B
(Revised 8/31/2000)
• Negative output from positive input
• Wide Input Range
• Self-Contained Inductor
• Short Circuit Protection
• Over-Temperature Protection
• Fast Transient Response
The PT78NR100 Series creates a
negative output voltage from a posi-
tive input voltage greater than 7V.
These easy-to-use, 3-terminal, Inte-
grated Switching Regulators (ISRs)
have maximum output power of 5
watts and a negative output voltage
that is laser trimmed. They also have
excellent line and load regulation.
Pin-Out Information
Ordering Information
Pin Function
PT 78NR1
XX Y
1
2
3
+V
in
Standard Application
-Vout
Output Voltage
Package Suffix
GND
03 = -3.0 Volts
05 = -5.0 Volts
52 = -5.2 Volts
06 = -6.0 Volts
07 = -7.0 Volts
08 = -8.0 Volts
09 = -9.0 Volts
10 = -10.0 Volts
12 = -12.0 Volts
14 = -13.9 Volts
15 = -15.0 Volts
V = Vertical Mount
S = Surface Mount
H = Horizontal
Mount
Vin
-Vout
COM
1
2
PT78NR100
3
+
C2
C1
COM
+
C1 = Required 100µF electrolytic (1)
C2 = Required 100µF electrolytic (1)
Pkg Style 500
Specifications
PT78NR100 SERIES
Typ Max
Characteristics
(T = 25°C unless noted)
a
Symbols
Conditions
Min
Units
Output Current
Io
Over Vin range Vo=-5V
Vo=-6V
0.05 (2)
—
—
—
—
—
—
1.00
0.8
(2)
0.05
(2)
Vo=-7, -8, -9V
0.05
0.55
0.5
A
Vo=-10V
0.05 (2)
(2)
Vo=-12V
0.05
0.40
0.30
(2)
Vo=-13.9, -15V
0.05
Short Circuit Current
Inrush Current
Isc
Vin=10V
—
4×Imax
—
Apk
Iir
tir
Vin=10V
—
—
4
—
—
A
On start-up
0.5
mSec
Input Voltage Range
Vin
0.1 ≤ Io ≤ Imax
Vo=-5V
7
7
7
7
—
—
—
—
25
21
18
15
V
V
V
V
Vo=-6, -7, -8, -9V
Vo=-10, -12V
Vo=-13.9, -15V
Output Voltage Tolerance
∆Vo
Over Vin range
—
±1.0
±3.0
%Vo
Ta=-20°C to +70°C
Over Vin range
0.1 ≤ Io ≤ Imax
Line Regulation
Load Regulation
Vo Ripple/Noise
Regline
Regload
Vn
—
—
—
±0.5
±0.5
±2
±1.0
±1.0
—
%Vo
%Vo
%Vo
Vin=10V, Io=Imax
Transient Response
(with 100µF output cap)
ttr
50% load change
Vo over/undershoot
—
—
100
5.0
250
—
µSec
%Vo
Efficiency
η
Vin=10V, Io=0.5×Imax, Vo = -5V
—
75
—
%
Switching Frequency
ƒo
Ta
Over Vin and Io ranges
600
650
700
kHz
Absolute Maximum
Operating Temperaturte Range
Free Air Convection, (40-60LFM)
Over Vin Range
-40
—
+85 (3)
°C
Thermal Resistance
Storage Temperature
Mechanical Shock
θja
Ts
—
—
Free Air Convection, (40-60LFM)
—
—
45
—
°C/W
°C
-40
—
—
+125
—
Per Mil-STD-883D, Method 2002.3
500
G’s
Mechanical Vibration
Per Mil-STD-883D, Method 2007.2,
20-2000 Hz, soldered in a PC board
—
—
—
5
G’s
Weight
—
—
6.5
Grams
Notes: (1) The PT78NR100 Series requires a 100µF electrolytic or tantalum capacitor at both the input and output for proper operation in all applications. The input
capacitor, C1 must have a ripple current rating ≥600 mArms, and an ESR ≤0.2Ω.
(2) The ISR will operate down to no load with reduced specifications.
(3) See Thermal Derating chart.
For technical support and more information, see inside back cover or visit www.ti.com/powertrends
Typical Characteristics
PT78NR100 Series
1 Amp Plus to Minus Voltage
Integrated Switching Regulator
PT78NR105 -5.0 VDC (See Note A)
PT78NR109 -9.0 VDC (See Note A)
PT78NR112 -12.0 VDC (See Note A)
Efficiency vs Output Current
Efficiency vs Output Current
Efficiency vs Output Current
100
90
100
100
90
80
70
60
50
40
90
Vin
VIN
80
80
Vin
7.0V
12.0V
15.0V
20.0V
25.0V
7.0V
9.0V
7.0V
70
60
50
40
70
12.0V
15.0V
18.0V
12.0V
15.0V
18.0V
21.0V
60
50
40
0
0.2
0.4
0.6
0.8
1
0
0.1
0.2
0.3
0.4
0.5
0
0.1
0.2
0.3
0.4
Iout-(Amps)
Iout-(Amps)
Iout-(Amps)
Ripple vs Output Current
Ripple vs Output Current
Ripple vs Output Current
200
160
120
80
200
160
120
80
250
200
150
100
50
Vin
Vin
21.0V
VIN
25.0V
18.0V
15.0V
12.0V
9.0V
20.0V
15.0V
12.0V
7.0V
18.0V
15.0V
12.0V
7.0V
7.0V
40
40
0
0
0
0.2
0.4
0.6
0.8
1
0
0
0.1
0.2
0.3
0.4
0
0.1
0.2
0.3
0.4
0.5
Iout-(Amps)
Iout-(Amps)
Iout-(Amps)
Thermal Derating (T ) (See Note B)
Thermal Derating (T ) (See Note B)
Thermal Derating (T ) (See Note B)
a
a
a
0.4
0.35
0.3
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0.6
0.5
0.4
0.3
0.2
0.1
0
60°C
70°C
70°C
70°C
85°C
0.25
0.2
85°C
85°C
0.15
0.1
0.05
0
7
10
13
16
19
22
25
7
11
15
19
7
10
13
16
19
Vin-(Volts)
Vin-(Volts)
Vin-(Volts)
Power Dissipation vs Output Current
Power Dissipation vs Output Current
Power Dissipation vs Output Current
1.6
1.4
1.2
1
2
1.8
1.6
1.4
1.2
1
1.6
1.4
1.2
1
Vin
Vin
21.0V
VIN
25.0V
18.0V
15.0V
12.0V
9.0V
20.0V
15.0V
12.0V
7.0V
18.0V
15.0V
12.0V
7.0V
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
7.0V
0
0.1
0.2
0.3
0.4
0.5
0
0.2
0.4
0.6
0.8
1
0
0.1
0.2
0.3
0.4
Iout-(Amps)
Iout-(Amps)
Iout-(Amps)
Note A: All data listed in the above graphs, except for derating data, has been developed from actual products tested at 25°C. This data is considered typical data for the ISR.
Note B: Thermal derating graphs are developed in free air convection cooling of 40-60 LFM. (See Thermal Application Notes.)
For technical support and more information, see inside back cover or visit www.ti.com/powertrends
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
Customers are responsible for their applications using TI components.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 2000, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明