R124681000 [ETC]
RIGHT ANGLE JACK RECEPTACLE FOR PCB SMT TYPE; 直角插孔插座的PCB SMT型
| 型号： | R124681000 |
| 厂家： | 
ETC |
| 描述： | RIGHT ANGLE JACK RECEPTACLE FOR PCB SMT TYPE |
| 文件： | 总4页 (文件大小：214K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1 / 4
TECHNICAL DATA SHEET
RIGHT ANGLE JACK RECEPTACLE FOR PCB
R124.681.000
Series : SMA-COM
SMT TYPE
All dimensions are in mm.
.
.
pn
ao
COMPONENTS
MATERIALS
PLATINGS (µm)
BODY
BRASS
GOLD 0.2 OVER NICKEL 2
CENTER CONTACT
OUTER CONTACT
BERYLLIUM COPPER
-
GOLD 0.5 OVER NICKEL 2
-
INSULATOR
PTFE
GASKET
OTHERS PARTS
-
-
-
-
-
-
-
-
-
Issue : 0430 B
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
2 / 4
TECHNICAL DATA SHEET
RIGHT ANGLE JACK RECEPTACLE FOR PCB
R124.681.000
Series : SMA-COM
SMT TYPE
PACKAGING
SPECIFICATION
Standard
Unit
Other
100
‘W’ option
Contact us
ELECTRICAL CHARACTERISTICS
ENVIRONMENTAL
Impedance
Frequency
VSWR
Insertion loss
RF leakage
Voltage rating
Operating temperature
Hermetic seal
x F(GHz) Maxi Panel leakage
√F(GHz) dB Maxi
° C
Atm.cm3/s
50
0-6
0.000
0.07
60
500
1000
5000
-65/+165
NA
Ω
GHz
+
1.16
NA
- F(GHz)) dB Maxi
Veff Maxi
Veff mini
- (
Dielectric withstanding voltage
Insulation resistance
MΩ mini
OTHERS CHARACTERISTICS
Assembly instruction
NA
Others :
-
MECHANICAL CHARACTERISTICS
Center contact retention
Axial force – Mating end
Axial force – Opposite end
Torque
N mini
N mini
N.cm mini
15
15
1
Recommended torque
Mating
Panel nut
N.cm
N.cm
40
NA
Mating life
Weight
Cycles mini
g
100
3.000
Issue : 0430 B
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
3 / 4
TECHNICAL DATA SHEET
RIGHT ANGLE JACK RECEPTACLE FOR PCB
R124.681.000
Series : SMA-COM
SMT TYPE
SERIE SMA - INFORMATION
COPLANAR LINE
Pattern and signal are on the same side Thickness of PCB : .063 (1.6 mm)
The material of PCB : epoxy resin (Er=4.8)
The solder resist should be printed except for the land pattern on the PCB
SHADOW OF RECEPTACLE FOR VIDEO CAMERA
Issue : 0430 B
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
4 / 4
TECHNICAL DATA SHEET
RIGHT ANGLE JACK RECEPTACLE FOR PCB
R124.681.000
Series : SMA-COM
SMT TYPE
SOLDER PROCEDURE
1. Deposition of solder paste ‘Sn Ag4 Cu0.5’ on mounting zone by screen printing application. We recommend a low
residue flux.
We advise a thickness of 150 microns ( 5.850 microinch ). Verify that the edges of the zone are clean.
2. Placement of the receptacle on the mounting zone with an automatic machine of ‘pick and place’ type.
Video camera is recommended for the positioning of the component. Adhesive agents must not be used on the
receptacle.
3. Soldering by infra-red reflow.
Below, please find the typical profile to use.
4. Cleaning of printed circuit boards.
5. Checking of solder joints and position of the component by visual inspection.
TEMPERATURE PROFILE
Parameter
Value
1 - 4
260
10
20
60
Unit
°C/sec
°C
sec
sec
Temperature rising Area
Max Peak Temperature
Max dwell time @260°C
Min dwell time @235°C
Max dwell time @235°C
Temperature drop in cooling Area
Max dwell time above 100°C
sec
-1 to - 4 °C/sec
420 sec
Issue : 0430 B
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
相关型号：
©2020 ICPDF网 联系我们和版权申明