RN-XVEE [ETC]
Provides drop in, certified Wi-Fi connectivity for existing systems currently using 802.15.4 modules.; 提供了下降，经过认证的Wi-Fi连接现有系统目前使用802.15.4模块。
| 型号： | RN-XVEE |
| 厂家： | 
ETC |
| 描述： | Provides drop in, certified Wi-Fi connectivity for existing systems currently using 802.15.4 modules. |
| 文件： | 总2页 (文件大小：1541K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RN-XVee Wi-Fi Module
Provides drop in, certified Wi-Fi connectivity for existing
systems currently using 802.15.4 modules.
PRODUCT BRIEF
RN-XVee
The RN-XVee module by Roving Networks provides drop-in, certified
Wi-Fi™ connectivity for existing systems using 802.15.4 modules.
The pin compatible footprint and simple ASCII configuration interface
allows designers to quickly have the RN-XVee module up and running
in existing 802.15.4 based products.
The RN-XVee module supports infrastructure networking for worldwide
internet access directly by every node and AdHoc connectivity for fully
connected point to point networks, unlike many 802.15.4 implementa-
tions that need extensive, custom network application profiles and ad-
ditional bridging products. The RN-XVee supports industrial temperature
ranges, making it ideal for applications such as sensor networks, industrial
or commercial controllers, utility meters and M2M applications.
The RN-XVee module is built upon Roving’s RN-171 ultra-low power
802.11 b/g technology, which boasts a complete onboard TCP/IP stack
with a simple UART or SPI slave HW interface. The stack offers network
services including IPv4 addressing with full WEP/WPA/WPA2 security,
FTP/HTTP client, UDP, TCP, HTTP, Telnet, DNS, and DHCP and
Wi-Fi protected setup (WPS) amongst others.
FEATURES
• Direct internet connectivity
• Full 802.11 b/g data rate support
• Onboard TCP/IP stack
In sleep mode the module consumes as little as 4µA but can wake,
associate, and send a full network packet in less than 100ms. In the con-
nected state the module consumes only 35mA and its configurable output
power allows for an optimized TX power consumption. The RN-XVee pins
can be configured for digital GPIO or analog inputs. The analog inputs
provide 14-bit A to D converter resolution while the GPIO can be config-
ured to signal a host microcontroller to simplify the interface between the
Wi-Fi module and host controller and further reduce system wake times.
• Infrastructure and AdHoc modes
• Ultra low power operation
• Industrial temperature range
• Multiple antenna options
• FCC, CE, IC, and Wi-Fi certifications
The module complete with onboard stack is available in low quantities for
only $34.95 USD and is offered with step pricing for volume orders.
RN-Vee-PB v. 0.82 06/11
© 2011 Roving Networks. All rights reserved.
RN-XVee Wi-Fi Module: Product Brief
BLOCK DIAGRAM
2kB NVM
GPIO
RN-XVee
Wi-Fi Module
2MB ROM
timers
LNA
SPI
2.4GHz
Radio
128KB RAM
PA
32-bit CPU
SDIO
802.11 b/g MAC/PHY
Crypto
Accelerator
SPECIFICATIONS
Performance
RF Data Rates
Range (LoS)
Up to 54Mbps
~200m
Transmit Power (Tx)
-2 to +12dBm (programmable)
-83dBm
Sensitivity (Rx)
Features
Serial Data Interface
Configuration
Frequency
UART (up to 464Kbps), SPI (up to 1.5Mbps)
API, local or remote (over air)
2.4GHz
ADC
(8) 14-bit inputs
3
Digital I/O
Antenna options
Wire, SMA*, UFL*, chip*
*Custom configuration with extended lead times.
Networking
Security & Encryption
Packet Delivery
Network Stack
WEP, WPA-TKIP, WPA2-AES
UDP, TCP, HTTP/FTP client
Onboard or Raw for external
Power
Supply Voltage
Tx Current
Rx Current
Sleep Current
3.3v regulated ( 10%)
120mA @ 0dBm
35mA (while connected)
4µA
Other
Dimensions (max)
Wi-Fi Protected Services (WPS)
Certifications
22mm x 32.94mm (0.960” x 1.297”)
Yes
FCC, CE, IC, Wi-Fi Alliance
102 Cooper Court | Los Gatos, CA 95032
+1 408 395-5300 | info@rovingnetworks.com
www.rovingnetworks.com
相关型号：
RN0S6BB237RFET
Fixed Resistor, Wire Wound, 0.6W, 237ohm, 50V, 1% +/-Tol, -20,20ppm/Cel, 2010,
OHMITE
RN1001(TPE2)
TRANSISTOR 100 mA, 50 V, NPN, Si, SMALL SIGNAL TRANSISTOR, TO-92, BIP General Purpose Small Signal
TOSHIBA
©2020 ICPDF网 联系我们和版权申明