RP10-2405DE/M1 概述
CONV DC/DC 10W 18-36VIN +/-05V
RP10-2405DE/M1 数据手册
通过下载RP10-2405DE/M1数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载• 2:1 input voltage range
• 1.6kVDC isolation
Features
DC/DC Converter
• UL60950-1 certified
• Efficiency up to 87%
• Fixed operation frequency
• Six-sided continuous shield
Regulated
Converter
RP10-E
10 Watt
2“ x 1“
Single and Dual
Output
Description
3
The RP10-E series DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them
ideal for all telecom and industrial applications where approved safety standards are required. The
industry standard 2” x 1” package meets military standards for thermal shock and vibration tolerance
and is available with an optional remote on/off control pin. This series is also available with the /M1 and
/M2 option which is particularly suitable for extended temperature range applications.
Selection Guide
Part Number
Input
Output
Voltage Range Voltage
Output
Current
[mA]
2000
2000
830
Input (1) Efficiency (1) Max. Capacitive
Current
[mA]
typ.
[%]
Load (2)
[µF]
[VDC]
9-18
9-18
9-18
9-18
18-36
18-36
18-36
18-36
36-75
36-75
36-75
36-75
9-18
[VDC]
3.3
5
12
15
3.3
5
12
15
3.3
5
12
15
5
12
15
5
12
15
5
RP10-123.3SE (3,4)
RP10-1205SE (3,4)
RP10-1212SE (3,4)
RP10-1215SE (3,4)
RP10-243.3SE (3,4)
RP10-2405SE (3,4)
RP10-2412SE (3,4)
RP10-2415SE (3,4)
RP10-483.3SE (3,4)
RP10-4805SE (3,4)
RP10-4812SE (3,4)
RP10-4815SE (3,4)
RP10-1205DE (3,4)
RP10-1212DE (3,4)
RP10-1215DE (3,4)
RP10-2405DE (3,4)
RP10-2412DE (3,4)
RP10-2415DE (3,4)
RP10-4805DE (3,4)
RP10-4812DE (3,4)
RP10-4815DE (3,4)
688
1029
988
997
344
508
494
499
172
248
241
241
992
1002
991
502
489
496
248
242
245
80
81
84
84
80
82
84
84
80
84
86
87
84
83
84
83
85
84
84
86
85
6800
4700
690
470
6800
4700
690
470
6800
4700
690
470
680
330
110
680
330
110
680
330
110
670
2000
2000
830
670
RoHS2
+
2000
2000
830
670
1000
416
333
1000
416
333
1000
416
REACH
compliant
compliant
10 from 10
E196683
9-18
9-18
18-36
18-36
18-36
36-75
36-75
36-75
UL60950-1 certified
EN55032 compliant
12
15
333
Notes:
Note1: Maximum values at nominal input voltage and full load
Note2: Max. Cap load is tested at minimum input and constant resistive load
Model Numbering
RP10-__ __ _E/_/M1-
(5)
nom. Input Voltage
“Package ”
(4)
nom. Output Voltage
Single or Dual
Notes:
“Extended Version
”
(3)
“CTRL Logic
”
Note3: no suffix for standard part without CTRL pin
add suffix “P” for CTRL function with positive logic (1=ON, 0=OFF)
add suffix “N” for CTRL function with negative logic (0=ON, 1=OFF)
Note4: add suffix “/M1” for higher efficiencies and extended temperature range
Note5: add suffix “-HC” for premounted Heat-sink with clips
Ordering Examples
RP10-1205SE/P = 12V input, 5V output, single, positive logic CTRL pin
RP10-4805DE/M1-HC = 48V input, 5V outputꢀ dual, extended temp. range, Heat-sink premounted
www.recom-power.com
REV.: 4/2020
PD-1
RP10-E
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
BASIC CHARACTERISTICS
Parameter
Condition
Min.
Typ.
Max.
Internal Input Filter
Pi-Type
nom. Vin = 12VDC
nom. Vin = 24VDC
nom. Vin = 48VDC
9VDC
18VDC
36VDC
12VDC
24VDC
48VDC
18VDC
36VDC
75VDC
36VDC
50VDC
100VDC
Input Voltage Range
nom. Vin = 12VDC
nom. Vin = 24VDC
nom. Vin = 48VDC
Input Surge Voltage
100ms max.
Minimum Load (6)
Start-up Time
10%
Power up
20ms
V
Open or 3.5VDC < CTRL< 12VDC
DC-DC ON
DC-DC OFF
Positive Logic
Negative Logic
ON/OFF CTRL (7)
refer to “ON/OFF CTRL”
V
Short or 0VDC < CTRL< 1.2VDC
V
DC-DC ON
DC-DC OFF
Short or 0VDC < CTRL< 1.2VDC
V
Open or 3.5VDC < CTRL< 12VDC
drive current
DC-DC OFF
-0.5mA
270kHz
+1.0mA
20mA
Input Current of CTRL pin
Standby Current
ICTRL
IIn
Internal Operating Frequency
300kHz
330kHz
Single
Dual
50mVp-p
75mVp-p
Output Ripple and Noise
20MHz BW
Input Reflected Ripple Current (8)
30mAp-p
Notes:
Note6: The RP10-E series requires a minimum of 10% loading on the output to maintain specified regulation. Operation
under no-load condition will not damage these devices, however they may not meet all listed specification
Note7: If no suffix is specified, the control pin will be absent. If fitted, the ON/OFF control function can be positive or negative logic.
The pin voltage is referenced to -Vin
Note8: Simulated source impedance of 12μH. 12μH inductor in series with +Vin
RP10-1205SE
Efficiency vs. Input Voltage full load
Efficiency vs. Output Current
95
90
85
80
75
70
65
60
55
50
45
40
85
80
75
70
65
60
55
9Vin
12Vin
18Vin
9
10
11
12
13
14
15
16
17
18
10
20
30
40
50
60
70
80
90
100
Input Voltage [VDC]
Output Current [%]
continued on next page
REV.: 4/2020
www.recom-power.com
PD-2
RP10-E
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
RP10-2405SE
Efficiency vs. Output Current
Efficiency vs. Input Voltage full load
95
90
85
80
75
70
65
60
90
85
80
75
70
65
60
55
18Vin
24Vin
36Vin
50
45
40
10
20
30
40
50
60
70
80
90
100
18
20
22
24
26
28
30
32
34
36
Output Current [%]
Input Voltage [VDC]
RP10-4805SE
Efficiency vs. Output Current
Efficiency vs. Input Voltage full load
86
84
82
80
78
76
74
95
90
85
80
75
70
65
60
55
50
45
36Vin
48Vin
75Vin
40
10
36
40
44
48
52
56
60
66
72
75
20
30
40
50
60
70
80
90
100
Input Voltage [VDC]
Output Current [%]
ON/OFF CTRL
IIN
+Vin
+Vout
+Vin
+Vout
DC-DC ON
DC-DC OFF
Open or 3.5VDC < VCTRL < 15VDC
Short or 0VDC < VCTRL < 1.2VDC
Positve Logic
ICTRL
CTRL
-Vin
VCTRL
DC-DC ON
DC-DC OFF
Short or 0VDC < VCTRL < 1.2VDC
Open or 3.5VDC < VCTRL < 15VDC
Negativ Logic
-Vout
-Vin
-Vout
REGULATIONS
Parameter
Condition
Value
1.0%
0.2%
Output Accuracy
Line Regulation
low line to high line, full load
Single
Dual
0.5%
1.0%
Load Regulation
Cross Regulation
0% to 100% load
asymmetrical 25%<>100% load
25% load step change
5.0%
Transient Response Recovery Time
250μs typ.
www.recom-power.com
REV.: 4/2020
PD-3
RP10-E
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
PROTECTIONS
Parameter
Condition
Value
Short Circuit Protection (SCP)
continuous, automatic recovery
3.3Vout
5Vout
12Vout
15Vout
3.9VDC typ.
6.2VDC typ.
15VDC typ.
18VDC typ.
Over Voltage Protection (OVP)
Over Load Protection (OLP)
zener diode clamp
% of Iout rated
150% typ.
continued on next page
PROTECTIONS
Parameter
Condition
Value
I/P to O/P
I/P to O/P to case
1.6kVDC/ 1 minute
1.6kVDC/ 1 minute
Isolation Voltage(9)
Isolation Resistance
Isolation Capacitance
Viso= 500VDC
1GΩ min.
300pF max.
Notes:
Note9: For repeat Hi-Pot testing, reduce the time and/or the test voltage
Note10: This power module is not internally fused. An input line fuse must always be used
ENVIRONMENTAL
Parameter
Condition
Value
Standard
with suffix “M1”
-25°C to +100°C
-40°C to +100°C
Operating Temperature Range
with derating
Maximum Case Temperature
Temperature Coefficient
+105°C
0.02%/ꢁ max.
@ natural convection 0.1m/s, without heat-sink
12ꢁ/W
10ꢁ/W
Thermal Impedance
vertical direction
with heat-sink
Operating Humidity
Thermal Shock
Vibration
non-condensing
5% - 95% RH
according to MIL-STD-810F
according to MIL-STD-810F
3342 x 103 hours
MTBF
MIL-HDBꢁ-217F, G.B.
Derating Graph (11)
RP10-4805SE
RP10-4805SE-HC
100
100
80
60
40
20
0
80
60
40
20
0
-20
0
20 40
60
80 100
-20
0
20 40
60
80 100
81
-25Ambient Temperature7[7°C]
-25 Ambient Temperature [°C]
continued on next page
REV.: 4/2020
www.recom-power.com
PD-4
RP10-E
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
RP10-4805SE/M1 (12)
RP10-4805SE/M1-HC (12)
100
100
80
60
40
20
0
80
60
40
20
0
-40 -20
0
20 40
60
80 100
85
-40 -20
0
20 40
60
80 100
88
Ambient Temperature [°C]
Ambient Temperature [°C]
Notes:
Note11: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number
not shown here please contact RECOM Techsupport for detailed information
Note12: “/M1” version is more efficient and can therefore operate in a more extensive temperature range than standard version
SAFETY AND CERTIFICATIONS
Certificate Type (Safety)
Condition
E196683
Standard
UL60950-1, 2nd Edition, 2011
CAN/CSA-C22.2 No. 60950-1-07, 2nd Edition, 2011
Information Technology Equipment, General Requirements for Safety
EAC
RU-AT.49.09571
TP TC 004/2011
RoHS2+
RoHS-2011/65/EU + AM-2015/863
EMC Compliance
Condition
Standard / Criterion
Electromagnetic compatibility of multimedia equipment - Emission
requirements
with external filter
(see filter suggestion below)
EN55032, Class A and B
ESD Electrostatic discharge immunity test
Radiated, radio-frequency, electromagnetic field immunity test
Fast Transient and Burst Immunity (13)
Air 8kV and Contact 6kV
EN61000-4-2, Criteria B
EN61000-4-3, Criteria A
EN61000-4-4, Criteria B
EN61000-4-5, Criteria B
EN61000-4-6, Criteria A
EN61000-4-8, Criteria A
10 V/m
2kV
Surge Immunity (13)
2kV
10 Vr.m.s
Immunity to conducted disturbances, induced by radio-frequency fields
Power Magnetic Field Immunity
100A/m continuous; 1000A/m 1s
Notes:
Note13: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5
Recom suggests Nippon chemi-con ꢁY series 220μF/100V
continued on next page
www.recom-power.com
REV.: 4/2020
PD-5
RP10-E
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
EMC Filtering Suggestions according to EN55032
Single
Dual
C2
C2
F1
F1
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
Com
-Vout
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
C1
C1
Com
-Vout
-Vout
-Vout
C3
C3
Component List Class A
MODEL
C1
C2
C3
RP10-12xxSE, RP10-12xxDE
RP10-24xxSE, RP10-24xxDE
RP10-48xxSE, RP10-48xxDE
2.2μF/25V, 1206 MLCC
1000pF/2kV, 1808 MLCC
1000pF/2kV, 1808 MLCC
1000pF/2kV, 1808 MLCC
1000pF/2kV, 1808 MLCC
1000pF/2kV, 1808 MLCC
1000pF/2kV, 1808 MLCC
N/A
N/A
Single
Dual
C3
C3
L1
L1
F1
F1
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
Com
-Vout
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
C1
C2
C1
C2
Com
-Vout
-Vout
-Vout
C4
C4
Component List Class B
MODEL
C1
C2
C3/C4
L1
RP10-12xxSE
RP10-12xxDE
3.3μF/50V
1812 MLCC
1000pF/2kV
1808 MLCC
CMC: 325μH
ref: WE 744290321 ref.: CMC-06
N/A
RP10-24xxSE
RP10-24xxDE
2.2μF/50V
1812 MLCC
1000pF/2kV
1808 MLCC
CMC: 325μH
ref: WE 744290321 ref.: CMC-06
N/A
RP10-48xxSE
RP10-48xxDE
2.2μF/100V
1812 MLCC
2.2μF/100V
1812 MLCC
1000pF/2kV
1808 MLCC
CMC: 325μH
ref: WE 744290321 ref.: CMC-06
DIMENSIONS AND PHYSICAL CHARACTERISTICS
Parameter
Type
case
base
Value
nickel coated copper
non-conductive black plastic
epoxy (UL94 V-0)
Material
potting
without Heat-sink
with Heat-sink
50.8 x 25.4 x 10.2mm
56.8 x 25.4 x 16.8mm
Dimensions (LxWxH)
Weight
without Heat-sink
with Heat-sink
27g
37.89g
continued on next page
REV.: 4/2020
www.recom-power.com
PD-6
RP10-E
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
Dimension Drawing (mm)
Pinning Information
Pin #
Single
+Vin
Dual
+Vin
-Vin
1
2
3
4
5
6
-Vin
+Vout
no Pin
-Vout
+Vout
Com
-Vout
50.8
25.4
CTRL(3) CTRL(3)
Tolerance: xx.x= ±±.ꢀ55
xx.xx= ±±.ꢁꢀ55
0.1
8 x 2.54= 20.32
15.20
Ø 1.0
Recommended Footprint Details
2.54
6
5
4
3
3
4
5
2
1
1 Bottom View
Top View
2
6
Dimension Drawing with Heat-sink (mm)
50.8
Top View
Heat-sink
56.8
24.2
0.1
8 x 2.54= 20.32
15.20
Ø 1.0
PACKAGING INFORMATION
Parameter
Type
Value
tube
tray
without heat-sink
with heat-sink
255.0 x 54.0 x 22.0mm
302.5 x 222.0 x 20.0mm
Packaging Dimension (LxWxH)
tube
tray
without heat-sink
with heat-sink
9pcs
20pcs
Packaging Quantity
Storage Temperature Range
Storage Humidity
-55°C to +125°C
5% - 95% RH
non-condensing
The product information and specifications may be subꢀect to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The
products are not authorized for use in safety-critical applications without RECOMꢁs explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause
loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized
use of RECOM products in such safety-critical applications.
www.recom-power.com
REV.: 4/2020
PD-7
RP10-2405DE/M1 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
RP10-2405DE/M1-HC | ETC | CONV DC/DC 10W 18-36VIN +/-05V | 获取价格 | |
RP10-2405DE/N | ETC | CONV DC/DC 10W 18-36VIN +/-05V | 获取价格 | |
RP10-2405DE/N-HC | ETC | CONV DC/DC 10W 18-36VIN +/-05V | 获取价格 | |
RP10-2405DE/N/M1 | ETC | CONV DC/DC 10W 18-36VIN +/-05V | 获取价格 | |
RP10-2405DE/P | ETC | CONV DC/DC 10W 18-36VIN +/-05V | 获取价格 | |
RP10-2405DE/P-HC | ETC | CONV DC/DC 10W 18-36VIN +/-05V | 获取价格 | |
RP10-2405DE/P/M1 | ETC | CONV DC/DC 10W 18-36VIN +/-05V | 获取价格 | |
RP10-2405DEM2 | RECOM | 10 Watt 2” x 1” Package Single & Dual Output | 获取价格 | |
RP10-2405DEN | RECOM | 10 Watt 2” x 1” Package Single & Dual Output | 获取价格 | |
RP10-2405DEP | RECOM | 10 Watt 2” x 1” Package Single & Dual Output | 获取价格 |
RP10-2405DE/M1 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6