RP10-4805SEW/P 概述
CONV DC/DC 10W 18-75VIN 05VOUT
RP10-4805SEW/P 数据手册
通过下载RP10-4805SEW/P数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载• Wide 4:1 input voltage range
• 1.6kVDC isolation
Features
DC/DC Converter
• UL60950-1 certified
• Efficiency up to 84%
Regulated
Converter
• Six-sided continuous shield
• Fixed operating frequency
RP10-EW
Description
10 Watt
2“ x 1“
Single and Dual
Output
The RP10-EW series wide input range DC/DC converters are certified to UL 60950-1 and cUL 60950-1.
This makes them ideal for all telecom and industrial applications where approved safety standards
are required. The industry standard 2” x 1” package meets military standards for thermal shock and
vibration tolerance and is available with an optional remote on/off control pin.
Selection Guide
Part Number
Input
Output
Output
Current
[mA]
2500
2000
830
Input (1) Efficiency (1) Max. Capacitive
Voltage Range Voltage
Current
[mA]
typ.
[%]
Load (2)
[µF]
[VDC]
9-36
9-36
9-36
9-36
18-75
18-75
18-75
18-75
9-36
9-36
9-36
18-75
18-75
18-75
[VDC]
3.3
5
12
15
3.3
5
12
15
5
12
15
5
RP10-243.3SEW(3,4)
RP10-2405SEW (3,4)
RP10-2412SEW (3,4)
RP10-2415SEW (3,4)
RP10-483.3SEW (3,4)
RP10-4805SEW (3,4)
RP10-4812SEW (3,4)
RP10-4815SEW (3,4)
RP10-2405DEW (3,4)
RP10-2412DEW (3,4)
RP10-2415DEW (3,4)
RP10-4805DEW (3,4)
RP10-4812DEW (3,4)
RP10-4815DEW (3,4)
441
521
494
517
226
322
247
249
508
520
520
254
267
257
78
80
84
81
76
81
84
84
82
80
80
82
78
81
6800
4700
690
470
6800
4700
690
470
680
330
110
680
330
110
670
2500
2000
830
670
1000
416
333
1000
416
E196683
12
15
333
Notes:
UL60950-1 certified
EN55032 compliant
Note1: Maximum values at nominal input voltage and full load
Note2: Max. Cap load is tested at minimum input and constant resistive load
Model Numbering
RP10-__ __ _EW/_-
nom. Input Voltage
“Package (4)
”
(3)
nom. Output Voltage
“CTRL Logic ”
Single or Dual
Notes:
Note3: no suffix for standard part without CTRL pin
add suffix “P” for CTRL function with positive logic (1=ON, 0=OFF)
add suffix “N” for CTRL function with negative logic (0=ON, 1=OFF)
Note4: add suffix “-HC” for premounted Heat-sink with clips
Ordering Examples
RP10-2405SEW/P = 24V input, 5V output, single, positive Logic CTRL pin
RP10-4805DEW/N-HC = 48V input, 5V output, dual, negative Logic CTRL pin, Heat-sink premounted
www.recom-power.com
REV.: 5/2019
PD-1
RP10-EW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
BASIC CHARACTERISTICS
Parameter
Condition
Min.
Typ.
Max.
Input Filter
Pi-Type
nom. Vin = 24VDC
nom. Vin = 48VDC
9VDC
18VDC
24VDC
48VDC
36VDC
75VDC
Input Voltage Range
nom. Vin = 24VDC
nom. Vin = 48VDC
50VDC
100VDC
Input Surge Voltage
100ms max.
Input Reflected Ripple Current (5)
Minimum Load (6)
30mAp-p
20ms
10%
Start-up Time
Power up
V
Open or 3.5VDC < CTRL< 12VDC
DC-DC ON
DC-DC OFF
Positive Logic
Negative Logic
V
Short or 0VDC < CTRL< 1.2VDC
ON/OFF CTRL (7)
V
Short or 0VDC < CTRL< 1.2VDC
DC-DC ON
DC-DC OFF
V
Open or 3.5VDC < CTRL< 12VDC
DC-DC ON
DC-DC OFF
-0.5mA
270kHz
+1.0mA
20mA
Input Current of CTRL pin
Standby Current
Internal Operating Frequency
300kHz
330kHz
Single
Dual
50mVp-p
75mVp-p
Ripple and Noise
20MHz BW
Notes:
Note5: Simulated source impedance of 12μH. 12μH inductor in series with +Vin
Note6: The RP10-EW series requires a minimum of 10% loading on the output to maintain specified regulation. Operation
under no-load condition will not damage these devices, however they may not meet all listed specification
Note7: If no suffix is specified, pin6 will be absent.
If fitted, the ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin
RP10-2405SEW
Efficiency vs. Input Voltage full load
Efficiency vs. Output Current
95
90
85
80
75
70
65
60
55
50
45
90
85
80
75
70
65
60
9Vin
24Vin
36Vin
40
10
9
12
15
18
21
24
27
30
33
36
20
30
40
50
60
70
80
90
100
Input Voltage [VDC]
Output Current [%]
continued on next page
REV.: 5/2019
www.recom-power.com
PD-2
RP10-EW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
RP20-4805SFW
Efficiency vs. Output Current
Efficiency vs. Input Voltage full load
90
85
80
75
70
65
60
95
90
85
80
75
70
65
60
55
18Vin
48Vin
75Vin
50
45
40
10
20
30
40
50
60
70
80
90
100
18 24 30 36 42 48 54 60
66
72 75
Output Current [%]
Input Voltage [VDC]
REGULATIONS
Parameter
Condition
Value
1.0%.
0.2%
Output Accuracy
Line Regulation
low line to high line, full load
Single
Dual
0.5%
1.0%
Load Regulation
Cross Regulation
0% to 100% load
asymmetrical 25%<>100% load
25% load step change
5.0%
Transient Response Recovery Time
250μs typ.
PROTECTIONS
Parameter
Condition
Value
Short Circuit Protection (SCP)
continuous, automatic recovery
3.3Vout
5Vout
12Vout
15Vout
3.9VDC
6.2VDC
15VDC
18VDC
Over Voltage Protection (OVP)
zener diode clamp
Over Load Protection (OLP)
Isolation Voltage(8)
% Iout rated
150% typ.
I/P to O/P
I/P to O/P to case
1.6kVDC/ 1 minute
1.6kVDC/ 1 minute
Isolation Resistance
Isolation Capacitance
Viso= 500VDC
1GΩ min.
300pF max.
Notes:
Note8: For repeat Hi-Pot testing, reduce the time and/or the test voltage
Note9: This power module is not internally fused. An input line fuse must always be used
www.recom-power.com
REV.: 5/2019
PD-3
RP10-EW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
ENVIRONMENTAL
Parameter
Condition
Value
without derating
with derating
-40°C to +78°C
-40°C to +94°C
Operating Temperature Range
Maximum Case Temperature
Temperature Coefficient
+105°C
0.02%/ꢀ max.
without heat-sink
with heat-sink
12ꢀ/W
10ꢀ/W
Thermal Impedance
@ natural convection 0.1m/s
non-condensing
Operating Humidity
Thermal Shock
Vibration
5% - 95% RH
according to MIL-STD-810F
according to MIL-STD-810F
MIL-HDBꢀ-217F, G.B.
Bellcore TR-NWT-000332 (10)
3342 x 103 hours
1976 x 103 hours
MTBF
Derating Graph (11)
RP10-2412SEW
RP10-2412SEW-HC
100
80
60
40
20
0
100
80
60
40
20
0
100
83 94
-40 -20
0
20 40
60
80 100
94
-40 -20
0
20 40
60
80
Ambient Temperature7[8°C]
Ambient Temperature [°C]
Notes:
Note10: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment)
Note11: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number
not shown here please contact RECOM Techsupport for detailed information
SAFETY AND CERTIFICATIONS
Certificate Type (Safety)
Condition
E196683
Standard
UL60950-1, 2nd Edition, 2011
CAN/CSA-C22.2 No. 60950-1-07, 2nd Edition, 2011
Information Technology Equipment, General Requirements for Safety
EAC
RU-AT.49.09571
TP TC 004/2011
RoHS 2
RoHS-2011/65/EU + AM-2015/863
EMC Compliance
Condition
Standard / Criterion
Electromagnetic compatibility of multimedia equipment - Emission
requirements
with external filter
refer to “EMC Filtering Suggestions”
EN55032, Class A and B
ESD Electrostatic discharge immunity test
Radiated, radio-frequency, electromagnetic field immunity test
Fast Transient and Burst Immunity (12)
Air 8kV and Contact 6kV
EN61000-4-2, Criteria B
EN61000-4-3, Criteria A
EN61000-4-4, Criteria B
EN61000-4-5, Criteria B
EN61000-4-6, Criteria A
EN61000-4-8, Criteria A
10 V/m
2kV
Surge Immunity (12)
2kV
10 Vr.m.s
Immunity to conducted disturbances, induced by radio-frequency fields
Power Magnetic Field Immunity
100A/m continuous; 1000A/m 1s
continued on next page
REV.: 5/2019
www.recom-power.com
PD-4
RP10-EW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
Notes:
Note12: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5
Recom suggests Nippon chemi-con ꢀY series 220μF/100V
EMC Filtering Suggestions according to EN55032
Single
C2
Dual
C2
F1
F1
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
C1
C1
Com
Com
-Vout
-Vout
-Vout
-Vout
C3
C3
Component List Class A
MODEL
C1
C2
C3
RP10-24xxSEW
RP10-24xxDEW
1μF/50V
1210 MLCC
1000pF/2kV
1808 MLCC
1000pF/2kV
1808 MLCC
RP10-48xxSEW
RP10-48xxDEW
1.5μF/100V
1812 MLCC
1000pF/2kV
1808 MLCC
1000pF/2kV
1808 MLCC
Single
Dual
C3
C3
L1
L1
F1
F1
+Vin
-Vin
+Vout
+Vin
+Vout
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
C1
C2
C1
C2
Com
-Vout
Com
-Vout
-Vout
-Vout
-Vin
C4
C4
Component List Class B
MODEL
C1
C2
C3/C4
L1
RP10-24xxSEW
RP10-24xxDEW
2.2μF/50V
1812 MLCC
1000pF/2kV
1808 MLCC
CMC: 325μH
ref: WE 744290321 ref.: CMC-06
N/A
RP10-48xxSEW
RP10-48xxDEW
2.2μF/50V
1812 MLCC
2.2μF/100V
1812 MLCC
1000pF/2kV
1808 MLCC
CMC: 325μH
ref: WE 744290321 ref.: CMC-06
DIMENSIONS and PHYSICAL CHARACTERISTICS
Parameter
Type
case
base
Value
nickel coated copper
non-conductive black plastic
epoxy (UL94 V-0)
Material
potting
without Heat-sink
with Heat-sink
50.8 x 25.4 x 10.2mm
56.8 x 25.4 x 16.8mm
Dimensions (LxWxH)
Weight
without Heat-sink
with Heat-sink
27g
37.89g
continued on next page
REV.: 5/2019
www.recom-power.com
PD-5
RP10-EW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
Dimension Drawing (mm)
Pinning Information
Pin #
Single
+Vin
Dual
+Vin
-Vin
1
2
3
4
5
6
-Vin
+Vout
no Pin
-Vout
+Vout
Com
-Vout
50.8
25.4
CTRL(3) CTRL(3)
Tolerance: xx.x= ±±.ꢀ55
xx.xx= ±±.ꢁꢀ55
0.1
8 x 2.54= 20.32
15.20
Ø 1.0
Recommended Footprint Details
2.54
6
5
4
3
3
4
5
2
1
1 Bottom View
Top View
2
6
Dimension Drawing with Heat-sink (mm)
50.8
Top View
Heat-sink
56.8
24.2
0.1
8 x 2.54= 20.32
15.20
Ø 1.0
Recommended Footprint Details
2.54
6
5
4
3
3
2
1
1 Bottom View
Top View
4
2
6
5
www.recom-power.com
REV.: 5/2019
PD-6
RP10-EW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
PACKAGING INFORMATION
Parameter
Type
Value
tube
tray
without heat-sink
with heat-sink
255.0 x 54.0 x 22.0mm
302.5 x 222.0 x 20.0mm
Packaging Dimension (LxWxH)
tube
tray
without heat-sink
with heat-sink
9pcs
20pcs
Packaging Quantity
Storage Temperature Range
Storage Humidity
-55°C to +125°C
5% - 95% RH
non-condensing
The product information and specifications may be subꢀect to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The
products are not authorized for use in safety-critical applications without RECOMꢁs explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause
loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized
use of RECOM products in such safety-critical applications.
www.recom-power.com
REV.: 5/2019
PD-7
RP10-4805SEW/P 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
RP10-4805SEW/P-HC | ETC | CONV DC/DC 10W 18-75VIN 05VOUT | 获取价格 | |
RP10-4805SEW/P/M2 | ETC | CONV DC/DC 10W 18-75VIN 05VOUT | 获取价格 | |
RP10-4805SEW/P/M2-HC | ETC | CONV DC/DC 10W 18-75VIN 05VOUT | 获取价格 | |
RP10-4805SEWM2 | RECOM | 10 Watt 2” x 1” Package Single & Dual Output | 获取价格 | |
RP10-4805SEWN | RECOM | 10 Watt 2” x 1” Package Single & Dual Output | 获取价格 | |
RP10-4805SEWP | RECOM | 10 Watt 2” x 1” Package Single & Dual Output | 获取价格 | |
RP10-4812DA | RECOM | 10 Watt Single & Dual Output | 获取价格 | |
RP10-4812DA/N | ETC | CONV DC/DC 10W 36-75VIN +/-12VOU | 获取价格 | |
RP10-4812DA/N-HC | ETC | CONV DC/DC 10W 36-75VIN +/-12VOU | 获取价格 | |
RP10-4812DA/XC-HC | ETC | CONV DC/DC 10W 36-75VIN +/-12VOU | 获取价格 |
RP10-4805SEW/P 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6