SC23PS-3 [ETC]
Used to strap coaxial and telephone cable to strand;型号: | SC23PS-3 |
厂家: | ETC |
描述: | Used to strap coaxial and telephone cable to strand |
文件: | 总7页 (文件大小:1549K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BELDEN
Diamond® Construction Hardware
Lashed Cable Supports
Lashed Cable Supports
• Used to strap coaxial and telephone cable to strand.
• Available in 430 stainless steel or special zinc alloy in 3/4”width.
• Edges are processed to remove raised and projecting metal. Edges are smooth and
free from burrs.
Part Number
Bundle
Inner Outer
Zinc
Stainless Steel
34-08912
34-08922
34-08932
34-08942
34-08952
34-08956
*
Length Diameter Circumference Pack
Pack
500
500
300
300
300
200
200
200
200
34-08911
34-08921
34-08931
34-08941
34-08951
*
10"
16"
22"
28"
34"
45"
50"
66"
66"
1.2"
2"
3.8"
6.3"
--
--
--
--
--
--
--
--
--
3"
9.4"
4"
12.6"
15.7"
20.4"
23.6"
31.4"
31.4"
5"
6.5"
7.5"
10.0"
10.0"
34-08961
*
34-08972
3408972-SP
*
Installation:
1
4
5
1. Measure diameter or circumference of
bundle. Use table to determine strap
length.
2. Thread strap through spacer slot.
3. Wrap strap around bundle (strand,
spacer, cables) then through buckle
twice, pulling eachwrap tight.
2
3
4. Strap end should be doubled under itself
(about 1.5”) before making final pass
through buckle. Trim off excess.
5. Bend doubled thickness over top of
buckle to prevent unravelling.
Note:
In cable TV installation, straps should
not be too tight as they may restrict
cable movement during contraction and
expansion and possibly damage cable.
* Ask PPC/Belden Representative.
www.ppc-online.com
Customer Support: 800.800.6652
22
A
BELDEN BRAND
Construction
Hardware
Diamond® Construction Hardware
Lashed Cable Supports
Lashed Cable Support Kit
• Used to strap coaxial or telephone cable to strand.
• Kit contains 100 ft. 430 stainless steel strapping and 75 steel buckles.
• Kit makes 75 straps 16” average length.
• Cut to desired length and secure to buckle.
Inner Outer
Part Number
34-00890
Description
Pack
Pack
3/4" Wide Stainless Steel Strap with 75 Buckles
1
10
Plastic Cable Spacer
• High density outdoor polyethylene with U.V. inhibitors.
• Bell type.
• Provides separation between aerial cable and messenger.
Inner Outer
Part Number
34-08850
Description
Pack
Pack
1,000
1,000
1/2" Plastic Spacer
3/4" Plastic Spacer
100
34-08875
100
Support Strap
• Reusable support strap with integral buckle made of malleable aluminum fire retardant.
Used to bundle telephone, coaxial and fiber cable at the steel strand.
• Safe to use, no sharp edges to cut hands or cables.
Inner Outer
Part Number
SC05-1
Description
Pack
Pack
10" Long, 3/4" Band
16" Long, 3/4" Band
--
500
SC06-1
--
500
Customer Support: 800.800.6652
www.ppc-online.com
23
A
BELDEN BRAND
BELDEN
Diamond® Construction Hardware
Clamps
Lashing Clamps
• Used to secure lashing wire terminations.
• Mechanically galvanized ASTM B695.
• 1/4” - 7/16” clamp range.
26-09010
Inner Outer
Part Number
SC07-1
Description
Pack
Pack
Lashing Clamp
--
100
26-09010
26-09010NS
26-09020
26-09022
"D" Lashing Clamp
--
--
--
--
100
100
100
100
"D" Lashing Clamp no stakes
"E" Lashing Clamp
26-09020
"E" Lashing Clamp with 2 Washers, 2 Nuts
Figure 8 Three Bolt Suspension Clamps
• Used to secure Figure 8 cable to pole.
• Center hole accommodates 1/2” or 5/8” diameter machine bolt.
• Clamp plates aluminum alloy.
• Steel bolts mechanically galvanized ASTM B695.
• Eliminates need to strip messenger.
Messenger
Inner Outer
Part Number
28-09610
Description
Size Range
.109" - .134"
.148" - .250"
Pack
Pack
Figure 8 Three Bolt Suspension Clamp
Figure 8 Three Bolt Suspension Clamp
--
25
28-09615
--
20
Figure 8 Tangent Support Clamps
• Used to secure Figure 8 cable to pole.
• Clamp plates and J Hook aluminum alloy.
• Eliminates need to strip messenger.
Thru Bolt
Hole Size
Messenger
Size Range
Inner Outer
Part Number
28-09500
28-09600
28-19651
Description
Pack
Pack
Tangent Support Clamp
Tangent Support Clamp
Tangent Support Clamp
5/8"
1/2"
5/8"
.148"-.250"
.109"-.134"
.109"-.134"
--
25
--
25
--
25
www.ppc-online.com
Customer Support: 800.800.6652
24
A
BELDEN BRAND
Construction
Hardware
Diamond® Construction Hardware
Hangers, Brackets, Hooks
Fiber Optic Rack Hanger
• Secures F.O. storage devices (snow shoes) to strand.
• For 1/4” - 7/16” strand.
• Aluminum bracket.
• Steel ASTM B695 clamp plates.
Inner Outer
Part Number
29-19945
Description
Pack
Pack
Fiber Optic Rack Hanger
--
25
Dead-End Bracket
• Dead-end bracket used to apply tension to steel strand building riser and to provide a
means to dead-end a guy strand.
• Mechanically galvanized ASTM B695.
• 1,000 lb. load capacity.
Inner Outer
Part Number
SC44-1
Description
Pack
Pack
5/16" Diameter Hook with 2-3/4" Tension Adjustment
--
25
Drive Hooks
• Used to support bail-type drop wire clamps to poles.
• Galvanized to ASTM A153 or B695.
• Fetter drive threads.
Inner Outer
Part Number
40-43007
Description
Pack
Pack
7/16" Diameter x 4-3/4" Long
5/16" Diameter x 3-1/2" Long
--
100
40-43008
--
200
Square Washer
• Supports bolt head or nut of machine bolt.
• Mechanically galvanized ASTM B695.
Inner Outer
Part Number
28-03004
Description
Pack
Pack
5/8" Bolt Size x 2-1/4" Square x 3/16" Thickness
--
100
Customer Support: 800.800.6652
www.ppc-online.com
25
A
BELDEN BRAND
BELDEN
Diamond® Construction Hardware
Tap Brackets
Tap Brackets
ed to secure tap to strand.
29-19941
e piece steel snap-on version mechanically galvanized ASTM B695 for 1/4” strand only.
uminum standard tap bracket & extension bracket. Both have 1/4” to 3/8” strand clamping range.
uare hole in standard aluminum tap bracket mounts Diamond trap sleeve brackets (“W”brackets).
Clearance
Part
Number
Between
Load Capacity (lbs)
Inner Outer
Description
Strand & Tap
(Minimal Deflection) Pack
Pack
29-19941 Steel Snap-on Tap Bracket
19943 Aluminum Tap Bracket (Standard)
19944 Aluminum Extension Bracket
50044 Strand Clamp
2-1/2"
2-1/2"
3" to 9"
--
40
30
25
--
--
--
--
--
25
29-19944
25
25
75
29-50044
Tap Bracket with Common Ground
• Tap bracket used to secure a tap to the steel strand and provide a means to bond up
to eight messengered drop cables.
• Firm and positive grip with no rotation or sliding on steel strand.
• Mechanically galvanized ASTM B695.
Inner Outer
Part Number
SC23CGS-4
Description
Pack
Pack
4" Horizontal Mounting with 8 Common Grounds
--
32
Tap Bracket - Vertical Mount
• Tap bracket used to secure a tap to the steel strand.
• Firm and positive grip with no rotation or sliding on steel strand.
• Stopper at multi-tap attachment prevents part rotation.
• Mechanically galvanized ASTM B695.
Inner Outer
Part Number
SC23PV-2
Description
Pack
Pack
2" Vertical Mount (Figure 8 Application)
--
32
SC23PV-4
4" Vertical Mount (Figure 8 Application)
--
32
www.ppc-online.com
Customer Support: 800.800.6652
26
A
BELDEN BRAND
Construction
Hardware
Diamond® Construction Hardware
Tap Brackets, Support Brackets
Tap Bracket - Horizontal Mount
• Tap bracket used to secure a tap to the steel strand.
• Firm and positive grip with no rotation or sliding on steel strand.
• Stopper at multi-tap attachment.
• Mechanically galvanized ASTM B695.
Inner Outer
Part Number
SC23PS-2
Description
Pack
Pack
2" Horizontal Mount
--
32
SC23PS-3
SC23PS-4
SC23PS4-C
3" Horizontal Mount
--
--
--
32
32
32
4" Horizontal Mount
4" Horizontal Mount - Canada
Strand Hanger Support Bracket
• Used in mid-span or next to tap application.
• In high risk theft areas, makes it more difficult to tamper with the traps.
• Support up to 4 trap shields (up to 16 traps).
• Mechanically galvanized ASTM B695.
• Can also be supplied with a coated top shield aluminum bracket.
Inner Outer
Part Number
SC73-1F
Description
Pack
Pack
Strand Hanger Support Bracket
--
32
Customer Support: 800.800.6652
www.ppc-online.com
27
A
BELDEN BRAND
Construction
Hardware
BELDEN
Diamond® Construction Hardware
Aerial Cable Damper
Aerial Cable Damper
• Aluminum alloy.
• Designed to use the force of wind to aerodynamically reduce oscillation of
cable.
• Supplied with special heavy duty lashed cable supports and “D” lashing
clamps to secure to strand.
• Assembly instructions provided.
Inner
Pack
Outer
Pack
Part Number
28-80001
Description
Aerial Cable Damper
--
5
Installation:
1. Select proper size cable guard for application.
2. Place guard on cable over horizontal slots in Aerial
Cable Damper (ACD).
3. Insert lashed cable supports through horizontal slots.
Use two wraps and secure by bending end over top
of buckle. Allow 1/4” clearance between cable and
top of the ACD. The ACD must be allowed to swing
free with the wind.
4. Position lashing clamps inside lashed cable supports
and secure. Lashing clamps will restrict longitudinal
movement to cable area protected by cable guards.
5. Placement – The number of ACDs varies with the
length of cable span and terrain. The following is
recommended as a guide for maximum effectiveness.
Level Ground – Locate at span’s center for 125-170
ft. spans (Fig. 1). On spans 170-300 ft., locate two
ACDs, each one-fourth the total span length from
either pole. (Fig. 2)
Steep Grade – Locate one-tenth total span length
from pole at lower level on 125-170 ft. spans. (Fig 3).
On spans 170-300 ft., two ACDs are required. Locate
one at one-fourth the total span length from lower
pole. Locate second ACD halfway between first ACD
and uphill pole. (Fig. 4).
Note: When installing on Fig. 8 cable:
1. ACD should be secured to exposed strand.
2. ACD will have limited dampening effective in
extreme high wind conditions.
www.ppc-online.com
Customer Support: 800.800.6652
28
A
BELDEN BRAND
相关型号:
©2020 ICPDF网 联系我们和版权申明