SDS1000X-E [ETC]
100 MHz, 200 MHz bandwidth models;型号: | SDS1000X-E |
厂家: | ETC |
描述: | 100 MHz, 200 MHz bandwidth models |
文件: | 总20页 (文件大小:1350K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SDS1000X-E
Series
Super Phosphor
Oscilloscope
SDS1000X-E Series Digital Oscilloscope
Key Features
100 MHz, 200 MHz bandwidth models
Two channel series have one 1 GSa/s ADC, four channel series have two 1 GSa/
s ADCs. When all channels are enabled, each channel has a maximum sample
rate of 500 MSa/s. When a single channel per ADC is active, it has sample rate
of 1 GSa/s
SDS1104X-E
SDS1204X-E
SDS1202X-E
The newest generation of SPO technology
• Waveform capture rate up to 100,000 wfm/s (normal mode), and
400,000 wfm/s (sequence mode)
• Supports 256-level intensity grading and color display modes
• Record length up to 14 Mpts
• Digital trigger system
Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out
(Dropout), Pattern
Product overview
SIGLENT’s new SDS1000X-E Super Phosphor Oscilloscopes feature two
channel and four channel models. The two channel model is available with
a 200 MHz analog bandwidth, a single ADC with 1 GSa/s maximum sample
rate, and a single memory module with 14 Mpts of sample memory. The
four channel scope is available in 100 and 200 MHz models and incorporates
two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels
are enabled, each channel has sample rate of 500 MSa/s and a standard
record length of 7 Mpts. When only a single channel per ADC is active, the
maximum sample rate is 1 GSa/s and the maximum record length is 14 Mpts.
For ease-of-use, the most commonly used functions can be accessed with its
user-friendly front panel design.
Serial bus triggering and decoding (Standard), supports protocols IIC, SPI,
UART, CAN, LIN
Video trigger, supports HDTV
Low background noise with voltage scales from 500 μV/div to 10 V/div
10 types of one-button shortcuts, supports Auto Setup, Default, Cursors,
Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
Segmented acquisition (Sequence) mode, divides the maximum record length
into multiple segments (up to 80,000), according to trigger conditions set by
the user, with a very small dead time segment to capture the qualifying event.
History waveform record (History) function, maximum recorded waveform
length is 80,000 frames.
Automatic measurement function for 38 parameters as well as Measurement
Statistics, Zoom, Gating, Math, History and Reference functions
The SDS1000X-E series employs a new generation of SPO (Super-
Phosphor Oscilloscope) technology that provides excellent signal fidelity
and performance. The system noise is also lower than similar products in
the industry. It comes with a minimum vertical input range of 500 uV/div,
an innovative digital trigger system with high sensitivity and low jitter, and
a waveform capture rate of 400,000 frames/sec (sequence mode). The
SDS1000X-E also employs a 256-level intensity grading display function
and a color temperature display mode not found in other models in this
class. SIGLENT’s latest oscilloscope offering supports multiple powerful
triggering modes including serial bus triggering. Serial bus decoding for IIC,
SPI, UART, CAN, LIN bus types are included. The X-E models also include
History waveform recording, and sequential triggering that enable extended
waveform recording and analysis. Another powerful addition is the new
1 million points FFT math function that gives the SDS1000X-E very high
frequency resolution when observing signal spectra. The new digital design
also includes a hardware co-processor that delivers measurements quickly
and accurately without slowing acquisition and front-panel response. The
features and performance of SIGLENT’s new SDS1000X-E cannot be matched
anywhere else in this price class.
1 Mpts FFT, four-channel series support Peaks, Markers, a variety of numbers
Math and measurement functions use all sampled data points (up to
14 Mpts)
Math functions (FFT, addition, subtraction, multiplication,division, integration,
differential, square root)
Preset key can be customized for user settings or factory “defaults”
Security Erase mode
High Speed hardware based Pass/Fail function
MSO, 16 digital channels (four channel series only, option)
Bode plot, Measuring Power Supply Control Loop
Response (four-channel series only)
Search and navigate (four channel series only)
USB AWG module (four channel series only, option)
USB WIFI adapter (four channel series only, option)
Web Browser based control (four channel series only)
Large 7 inch TFT -LCD display with 800 * 480 resolution
Multiple interface types: USB Host, USB Device (USB-TMC), LAN, Pass / Fail,
Trigger Out
The four channel series support even more functions, including: searching
and navigating, on-screen Bode plot, 16 digital channels (Option), an external
USB powered 25 MHz AWG module (Option), a USB WIFI adapter (Option),
and an embedded application that allows remote control via web browser.
Supports SCPI remote control commands
VXI-11+SCPI, Telnet(Port 5024)+SCPI and Socket(Port 5025)+SCPI
programming over LAN
Supports web control and virtual panel for both PC and mobile terminals
Web update rate of up-to 10times/s provides nearly real-time updating with
SDS1000X-E(four channel series only)
Supports Multi-language display and embedded online help
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
SDS1204X -E
SDS1202X-E
Model
SDS1104X-E
Bandwidth
100 MHz
200 MHz
Two channel series have a single 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all
channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per
pair is active, that channel has sample rate of 1 GSa/s
Sampling Rate (Max.)
4 (four channel series)
2+EXT (two channel series)
Channels
7 Mpts/CH (not interleave mode);
14 Mpts/CH (interleave mode)
Memory Depth (Max.)
Waveform Capture Rate (Max.)
Trigger Type
100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
IIC, SPI, UART, CAN, LIN
Serial Trigger and decoder (Standard)
16 Digital Channels (four channel series only,
option)
Maximum waveform capture rate up to 1 GSa/s, Record length up to 14 Mpts/CH
One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts
USB AWG module (four channel series only, option)
Bode plot ( four channel series only)
Minimum start frequency of 10 Hz, minimum scan bandwith of 500 Hz, maximum scan bandwidth of 120
MHz (dependent on Oscilloscope and AWG bandwidth), 500 maximum scan frequency points
USB WIFI adapter (four channel series only, option) 802.11b/g/n, WPA-PSK, the adapter must be supplied by Siglent to ensure working
I/O
USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus (Siglent MSO)
Probe (Std)
Display
4 pcs passive probe PP510
7 inch TFT -LCD (800x480)
4/2 pcs passive probe PP215
Four channel series: Without package 2.6 kg; With package 3.8 kg
Two channel series: Without package 2.5 kg; With package 3.5 kg
Weight
Function & Characteristics
7 inch TFT-LCD display and 10 one-button menus
Front panel of the four channel series
Front panel of the two channel series
• 7 -inch TFT -LCD display with 800 * 480 resolution
• Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursor, Measure, Roll, History, Persist, Clear
Sweep, Zoom, Print
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Function & Characteristics
When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single
channel per pair is active, that channel has sample rate of 1 GSa/s
The four channel series has two 1 GSa/s ADC chips (channel 1 and 2 share one, channel 3 and 4 share another), so that each channel can achieve sample rates up
to 500 MSa/s and work on bandwidths of 200 MHz when all channels are enabled.
Record Length of up to 14 Mpts (single channel/
pair mode), 7 Mpts/CH (two channels/pair
mode)
Waveform Capture Rate up to 400,000 wfm/s
Using hardware-based Zoom technologies and max record length of up to
14 Mpts, users are able to oversample to capture for longer time periods
at higher resolution and use the zoom feature to see more details within
each signal.
With a waveform capture rate of up to 400,000 wfm/s (sequence mode),
the oscilloscope can easily capture the unusual or low-probability events.
256 -Level Intensity Grading and Color Temperature Display
SPO display technology provides fast refresh rates. The resulting
intensity-graded trace is brighter for events that occur with more
frequency and dims when the events occur with less frequency.
The color temperature display is similar to the intensity-graded trace
function, but the trace occurrence is represented by different colors (color
“temperature”) as opposed to changes in the intensity of one color. Red
colors represents the more frequent events, while blue is used to mark
points that occur lest frequently.
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Serial Bus Decoding Function (Standard)
History Waveforms (History) Mode and
Segmented Acquisition (Sequence)
SDS1000X-E displays the decoding through the events list. Bus protocol
information can be quickly and intuitively displayed in a tabular format.
Playback the latest triggered events using the history function.
Segmented memory collection will store trigger events into multiple
(Up to 80,000) memory segments, each segment will store triggered
waveforms and timestamp of each frame.
True measurement to 14 M points
Gate and Zoom Measurement
SDS1004X-E can measure all sampled data points up to 14 Mpts. This
ensures the accuracy of measurements while the math co-processor
decreases measurement time and increases ease-of-use.
Through Gate and Zoom measurement, the user can specify an arbitrary
interval of waveform data analysis and statistics. This helps avoid
measurement errors that can be caused by invalid or extraneous data,
1 M point used to calculate the FFT
Hardware-Based High Speed Pass/ Fail
function
The new math co-processor enables FFT analysis of incoming signals using
up to 1 M samples per waveform. This provides high frequency resolution
with a fast refresh rate. The FFT function also supports a variety of window
functions so that it can adapt to different spectrum measurement needs.
Four-channel series support Peaks, Markers, a variety of numbers.
The SDS1000X-E utilizes a hardware-based Pass/Fail function, performing
up to 40,000 Pass / Fail decisions each second. Easily generate user
for long-term signal monitoring or automated production line testing.
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Customizable Default Key
16 Digital Channels/MSO (four channel series
only, option)
The current parameters of the oscilloscope can be preset to Default Key
through the Save menu.
16 digital channels enables users to acquire and trigger on the
waveforms then analyze the pattern, simultaneously with one instrument.
Search and Navigate (four channel series only)
Bode Plot (four channel series only)
SDS1000X-E can control the USB AWG module or control an independent SIGLENT SDG instrument, scan a devices amplitude and phase frequency response, and display
the data as a Bode Plot. There is also a Vari-level Mode for accurately measuring Power Supply Control Loop Response (PSRR). It can also show the result lists, and export
the data to a USB disk.
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
USB WIFI Adapter (four channel series only,
option)
USB WIFI Adapter
WiFi control of instrumentation can provide a convenient and safe
method of configuring and collecting data. This new feature works
with a SIGLENT approved WiFi adapter to provide wireless control and
communications with SIGLENT 4 channel scopes. The adapter must be
supplied by Siglent to ensure working.
The four channel series supports a USB 25 MHz function/arbitrary
waveform generator that is operated from the USB host connection.
Functions include Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in
waveforms. The arbitrary waveforms can be accessed and edited by the
SIGLENT EasyWave PC software.
Web control (four channel series only)
Real-time update screen in web page (four channel
series only)
With the new embedded web server, users can control the SDS1xx4X-E
from a simple web page. This provides wonderful remote troubleshooting
With 100 Mbps LAN connection, the web page can update the waveforms
at a rate of up to 10 times/s. The new information on SDS1000X-E can
be updated to web page in real-time, including waveform data and
measurements. When viewed on a PC, the screen can be displayed
in full screen mode. With this feature and a PC VGA interface, you
and monitoring capabilities. The web page has PC and mobile styles that
include an embedded virtual control panel
can easily use a projector or other video display device to deliver the
screen information to a larger audience.
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Complete Connectivity
Back panel of the four channel series
SDS1000X -E supports USB Host, USB Device (USB -TMC), LAN(VXI -11), Pass/Fail and Trigger Out
Back panel of the two channel series
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Acquire System
Sampling Rate
1 GSa/s (single channel/pair), 500 MSa/s (two channels/pair)
Max 14 Mpts/Ch (single channel/pair), 7 Mpts/Ch (two channels/pair)
2 ns (Four channel series)
Memory Depth
Peak Detect
4 ns (Two channel series)
Average
Averages:4, 16, 32, 64, 128, 256, 512, 1024
Enhance bits:0.5, 1.5, 2, 2.5, 3
Eres
Waveform interpolation
Sin(x)/x, Linear
Input
4 (Four channel series)
2+EXT (Two channel series)
Channels
Coupling
Impedance
DC, AC, GND
DC: (1 MΩ±2%) || (15 pF ±2 pF) (Four channel series)
DC: (1 MΩ±2%) || (18 pF ±2 pF) (Two channel series)
Max.Input voltage
CH to CH Isolation
Probe attenuation
1 MΩ: ≤400 Vpk(DC + Peak AC <=10 kHz)
DC-Max BW: >40 dB
0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X……1000X, 2000X, 5000X, 10000X
Vertical System
200 MHz (SDS1204X-E/SDS1202X-E)
100 MHz (SDS1104X-E)
Bandwidth ( -3 dB )
Vertical Resolution
8-bit
Vertical Scale (Probe 1X)
500 μV/div - 10 V/div (1-2-5 sequence )
500uV~118mV: ±2V
Offset Range (Probe 1X)
Bandwidth Limit
120mV~1.18V: ±20V
1.2V~10V: ±200V
20 MHz ±40%
DC- 10% (BW): ± 1 dB
Bandwidth Flatness
Low Frequency Response (AC -3 dB)
Noise
10%- 50% (BW): ± 2 dB
50%- 100% (BW): + 2 dB/-3 dB
≤2 Hz (at input BNC)
ST-DEV ≤0.5 division (<1 mV/div)
ST-DEV ≤0.2 division (<2 mV/div)
ST-DEV ≤0.1 division (≥2 mV/div)
≥35 dB
SFDR including harmonics
DC Gain Accuracy
≤±3.0%: 5 mV/div-10 V/div
≤±4.0%: ≤2 mV/div
±(1%* Offset+1.5%*8*div+2 mV): ≥2 mV/div
±(1%* Offset+1.5%*8*div+500 uV): ≤1 mv/div
Typical 1.8 ns (SDS1204X-E/SDS1202X-E)
Typical 3.5 ns (SDS1104X-E)
<10%
Offset Accuracy
Risetime
Overshoot (500 ps Pulse)
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Horizontal System
Timebase Scale
1.0 ns/div-100 s/div
Channel Skew
<100 ps
Waveform Capture Rate
Intensity grading
Display Format
Up to 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
256 Levels
Y-T, X-Y,Roll
Timebase Accuracy
Roll Mode
±25 ppm
50 ms/div-100 s/div (1-2-5 sequence)
Trigger System
Trigger Mode
Auto, Normal, Single
Internal: ±4.5 div from the center of the screen
EXT: ±0.6 V (Two channel series)
EXT/5: ±3 V (Two channel series)
80 ns- 1.5 s
Trigger Level
Holdoff Range
AC
DC
Trigger Coupling
LFRJ
HFRJ
Noise RJ
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
Coupling Frequency Response
LFRJ: Blocks the DC component and attenuates the low-frequency components below 2 MHz
HFRJ: Attenuates the high-frequency components above 1.2 MHz
DC: Passes all components of the signal
Coupling Frequency Response (EXT, Two
channels series)
AC: Blocks DC components and attenuates signals below 20 Hz
LFRJ: Blocks the DC components and attenuates low-frequency components below 7 khz
HFRJ: Attenuates high-frequency components above 160 khz
Internal: ±0.2 div
Trigger Accuracy (typical)
Trigger Sensitivity
EXT (Two channel series): ±0.4 div
DC - Max BW 0.6 div
EXT (Two channel series): 200 mVpp DC– 10 MHz
300 mVpp 10 MHz - BW frequency
EXT/5 (Two channel series): 1 Vpp DC – 10 MHz
1.5 Vpp 10 MHz -BW frequency
Trigger Jitter
< 100 ps
Trigger Displacement
Pre-Trigger: 0 - 100% Memory
Delay Trigger: 0 to 10,000 div
Edge Trigger
Slope
Rising, Falling, Rising&Falling
All channels/ EXT/ (EXT/5)/ AC Line (Two channel series)
All channels/ AC Line (Four channel series)
Source
Slope Trigger
Slope
Rising, Falling
< , > , <> , ><
All channels
2 ns- 4.2 s
LimitRange
Source
TimeRange
Resolution
1 ns
SDS1000X-E Series Digital Oscilloscope
Pulse Trigger
Polarity
+wid , -wid
< , > , <> , ><
All channels
2 ns ~ 4.2 s
1 ns
Limit Range
Source
Pulse Range
Resolution
Video Trigger
Signal Standard
Source
NTSC,PAL,720p/50,720p/60,1080p/50,1080p/60,1080i/50,1080i/60,Custom
All channels
Any, Select
Line, Field
Sync
Trigger condition
Window Trigger
Window Type
Source
Absolute, Relative
All channels
Interval Trigger
Slope
Rising, Falling
< , > , <> , ><
All channels
2 ns ~ 4.2 s
1 ns
Limit Range
Source
Time Range
Resolution
Dropout Trigger
Timeout Type
Source
Edge, State
All channels
Rising, Falling
2 ns ~ 4.2 s
1 ns
Slope
Time Range
Resolution
Runt Trigger
Polarity
+wid , -wid
< , > , <> , ><
All channels
2 ns ~ 4.2 s
1 ns
Limit Range
Source
Time Range
Resolution
Pattern Trigger
Pattern Setting
Logic
Invalid, Low, High
AND, OR, NAND, NOR
All channels
Source
Limit Range
Time Range
Resolution
< , > , <> , ><
2 ns ~ 4.2 s
1 ns
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Serial Trigger
I2C Trigger
Condition
Start, Stop, Restart, No Ack, EEPROM, 7 bits Address & Data, 10 bits Address & Data, Data Length
Source (SDA/SCL)
Data format
All channels
Hex
Limit Range
EEPROM: =, >, <
EEPROM: 1 byte
Data Length
Addr & Data: 1 ~ 2 byte
Data Length: 1 ~ 12 byte
R/W bit
Addr & Data: Read, Write, Do not care
SPI Trigger
Condition
Data
Source (CS/CL/Data)
Data format
Data Length
Bit Value
All channels
Binary
4 ~ 96 bit
0, 1, X
Bit Order
LSB, MSB
UART Trigger
Condition
Start, Stop, Data, Parity Error
Source (RX/TX)
Data format
Limit Range
Data Length
Data Width
Parity Check
Stop Bit
All channels
Hex
=, >, <
1 byte
5 bit, 6 bit, 7 bit, 8 bit
None, Odd, Even
1 bit, 1.5 bit, 2 bit
Idle Level
High, Low
Baud Rate (Selectable)
Baud Rate (Custom)
CAN Trigger
Condition
600/1200/2400/4800/960019200/38400/57600/115200 bit/s
300 bit/s ~ 5000000 bit/s
Start Remote, ID, ID + Data, Error
Source
All channels
ID
STD (11 bit), EXT (29 bit)
Data Format
Data Length
Baud Rate
Hex
1~2 byte
5 k/10 k/20 k/50 k/100 k/125 k/250 k/500 k/800 k/1 M bit/s
LIN Trigger
Condition
Break, Frame ID, ID+Data, Error
Source
All channels
ID
1 byte
Data Format
Data Length
Baud Rate (Selectable)
Baud Rate (Custom)
Hex
1 ~ 2 byte
600/1200/2400/4800/9600/19200 bit/s
300 bit/s ~ 20 kbit/s
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Serial Decoder
Number of Decoders
I2C Decoder
Signal
2
SCL, SDA
Address
7 bits, 10 bits
-4.5 ~ 4.5 div
1 ~ 7 lines
Threshold
List
SPI Decoder
Signal
SCL,MISO, MOSI, CS (2 channel scopes can only use 2 signal identifiers)
Edge Select
Bit Order
Rising, Falling
MSB, LSB
Threshold
List
-4.5 ~ 4.5 div
1 ~ 7 lines
UART Decoder
Signal
RX, TX
Data Width
Parity Check
Stop Bit
5 bit,6 bit,7 bit,8 bit
None, Odd, Even
1 bit, 1.5 bit, 2 bit
Low, High
Idle Level
Threshold
List
-4.5 ~ 4.5 div
1 ~ 7 lines
CAN Decoder
Signal
CAN_H, CAN_L
Source
CAN_H, CAN_L, CAN_H-CAN_L
-4.5 ~ 4.5 div
Threshold
List
1 ~ 7 lines
LIN Decoder
LIN Specification Package Revision
Threshold
List
Ver1.3, Ver2.0
-4.5 ~ 4.5 div
1 ~ 7 lines
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Measurement
Source
All channels, All channels in Zoom, Math, All References, History
Number of Measurements Display 4 measurements at the same time . 5 measurements displayed in statistics table.
Measurement Range Screen region, Gate region
Measurement Parameters ( 38 Types )
Max
Highest value in input waveform
Min
Lowest value in input waveform
Pk-Pk
Ampl
Top
Difference between maximum and minimum data values
Difference between top and base in a bimodal signal, or between max and min in an unimodal signal
Value of most probable higher state in a bimodal waveform
Value of most probable lower state in a bimodal waveform
Average of all data values
Base
Mean
Cmean
Average of data values in the first cycle
Vertical(Voltage)
Stdev
Cstd
Standard deviation of all data values
Standard deviation of all data values in the first cycle
Root mean square of all data values
VRMS
Crms
FOV
Root mean square of all data values in the first cycle
Overshoot after a falling edge; (base-min)/Amplitude
Overshoot before a falling edge; (max-top)/Amplitude
Overshoot after a rising edge; (max-top)/Amplitude
Overshoot before a rising edge; (base-min)/Amplitude
the voltage value of the trigger point
FPRE
ROV
RPRE
Level@X
Period
Freq
Time between the middle threshold points of two consecutive, like-polarity edges
Reciprocal of period
+Wid
Time difference between the 50% threshold of a rising edge to the 50% threshold of the next falling edge of the
pulse
-Wid
Time difference between the 50% threshold of a falling edge to the 50% threshold of the next rising edge of the
pulse
Rise Time
Fall Time
Bwid
Duration of rising edge from 10-90%
Duration of falling edge from 90-10%
Horizontal(Time)
Time from the first rising edge to the last falling edge, or the first falling edge to the last rising edge at the 50%
crossing
+Dut
-Dut
Ratio of positive width to period
Ratio of negative width to period
Delay
Time from the trigger to the first transition at the 50% crossing
Time from the trigger to each rising edge at the 50% crossing.
When Statistics is Off, it shows the time from the trigger to the last rising edge at the 50% crossing.
When Statistics is On, it shows the Current, Mean, Min, Max, Standard Deviation of time from the trigger to each
rising edge at the 50% crossing in multiple frames (number = Count).
Time@Level
Phase
FRR
FRF
FFR
FFF
Phase difference between two edges
Time from the first rising edge of channel A to the following first rising edge of channel B
Time from the first rising edge of channel A to the following first falling edge of channel B
Time from the first falling edge of channel A to the following first rising edge of channel B
Time from the first falling edge of channel A to the following first falling edge of channel B
Time from the first rising edge of channel A to the last rising edge of channel B
Time from the first rising edge of channel A to the last falling edge of channel B
Time from the first falling edge of channel A to the last rising edge of channel B
Time from the first falling edge of channel A to the last falling edge of channel B
Time of source A edge minus time of nearest source B edge
Delay
LRR
LRF
LFR
LFF
Skew
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Measurement
Cursors
Manual : Time X1, X2, (X1-X2), (1/ΔT)
Voltage Y1, Y2, (Y1-Y2)
Track: Time X1, X2, (X1-X2)
Statistics
Counter
Current, Mean, Min, Max, Stdev, Count
Hardware 6 bit 6-digit counter(channels are selectable)
Math Function
Operation
+ , - , * , / , FFT , d/dt , ∫dt , √
Rectangular, Blackman, Hanning, Hamming, Flattop
Full Screen, Split, Exclusive
FFT window
FFT display
USB AWG Module (four channel series only, option)
Channel
1
Max. Output Frequency
Sampling Rate
25 MHz
125 MSa/s
Frequency Resolution
Frequency Accuracy
Vertical Resolution
Amplitude Range
1 μHz
±50 ppm
14-bit
-1.5 ~ +1.5 V (50Ω load)
-3 ~ +3 V (High-Z load)
Waveform Type
Output impedance
Protection
Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in waveforms
50 Ω±2%
Over-Voltage Protection, Current-Limiting Protection
Sine
Frequency
1 μHz ~ 25 MHz
Offset Accuracy (10 kHz)
±(1%*Offset Setting Value +3 mVpp)
Amplitude flatness
(10 kHz, 5 Vpp)
±0.3 dB
DC ~ 1 MHz
-60 dBc
SFDR
HD
1 MHz ~ 5 MHz -55 dBc
5 MHz ~ 25 MHz -50 dBc
DC ~ 5 MHz
-50 dBc
5 MHz ~ 25 MHz -45 dBc
Square/Pulse
Frequency
1 μHz ~ 10 MHz
1% ~ 99%
Duty Cycle
Rise/Fall time
< 24 ns (10% ~ 90%)
< 3% (typical 1 kHz, 1 Vpp)
> 50 ns
Overshoot (1 kHz,1 Vpp, Typical)
Pulse Width
Jitter
< 500 ps + 10 ppm
Ramp
Frequency
1 μHz ~ 300 kHz
Linearity (Typical)
Symmetry
< 0.1% of Pk-Pk (Typical, 1 kHz, 1 Vpp, 50% Symmetry)
0% ~ 100%
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
DC
±1.5 V (50 Ω load)
±3 V (High-Z load)
±(|offset|*1%+3 mV)
Offset range
Accuracy
Noise
Bandwidth
>25 MHz (-3 dB)
Arbitrary Wave
Frequency
1 μHz ~ 5 MHz
16 kpts
Wave Length
Sampling Rate
Lead in
125 MSa/s
EasyWave and U-Disk
Digital Channels (four channel series only, option)
No. of Channels
Max. Sampling Rate
Memory Depth
Min. Detectable Pulse Width
Level Group
16
1 GSa/s
14 Mpts/CH
4 ns
D0~D7, D8~D15
Level Range
-8 V ~ 8 V
Logic Type
TTL, CMOS, LVCMOS3.3, LVCMOS2.5, custom
Skew
D0~D15: ±1 sampling interval
Digital to Analog: ± (1 sampling interval +1 ns)
I/O
Standard
Pass/Fail
USB Host (1 for two channel series, and 2 for four channel series), USB Device, LAN, Pass/Fail, Trigger Out
3.3 V TTL Output
Display (Screen)
Display Type
7-inch TFT LCD
800×480
24 bit
Display Resolution
Display Color
Contrast (Typical)
Backlight
500:1
300 nit
Range
8 x 14 divisions
Display (Waveform)
Display Mode
Dot, Vector
Persist Time
Off, 1 Sec, 5 Sec, 10 Sec, 30 Sec, Infinite
Color Display
Normal, Color
Screen Saver
1 min, 5 min, 10 min, 30 min, 1 hour, Off
Language
Simplified Chinese, Traditional Chinese, English, French, Japanese, Korean, German, Russian, Italian, Portuguese
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Environments
Temperature
Operating: 10℃ ~ +40℃
Non-operating: -20℃ ~ +60℃
Operating: 85% RH, 40℃ , 24 hours
Non-operating: 85% RH, 65℃ , 24 hours
Operating: ≤3000 m
Humidity
Height
Non-operating: ≤15,266 m
LVD IEC 61010-1:2010
Compliance
EMC EN61326-1:2013
Power Supply
100 - 240 Vrms (± 10%), 50 / 60 Hz
100 - 120 Vrms (± 10%), 400 Hz
Input Voltage
50W Max(Four channel series)
25W Max(Two channel series)
Power
Mechanical (Four channel series)
Length: 312 mm
Dimensions
Weight
Width: 132.6 mm
Height: 151 mm
N.W: 2.6 kg; G.W: 3.8 kg
Mechanical (Two channel series)
Length: 312 mm
Dimensions
Weight
Width: 134 mm
Height: 150 mm
N.W: 2.5 kg; G.W: 3.5 kg
SDS1000X-E Series Digital Oscilloscope
Probes and Accessories
Probe
Model
Picture
Description
PP510
Passive
Bandwidth: 100 MHz, 1X/10X, 1M/10 Mohm,300 V/600 V
Bandwidth: 200 MHz, 1X/10X, 1M/10 Mohm, 300 V/600 V
PP215
Bandwidth: 100 KHz, Max. continuous current: 20 Arms, Peak current: 60 A
Switch Ratio: 50 mV/A, 5 mV/A, Accuracy: 50 mV/A (0.4 A-10 Apk)±2%, 5
mV/A (1 A-60 Apk) ±2%, 9 V battery source
CP4020
Bandwidth: 1 MHz, Max. continuous current: 50 Arms, Peak current: 140 A
Switch Ratio: 500 mV/A, 50 mV/A
CP4050
Accuracy: 500 mV/A (20 mA-14 ApK )±3% ±20 mA , 50 mV/A (200 mA-
100 ApK) ±4%±200 mA, 50 mV/A (100 A-140 ApK) ±15% max, 9V battery
source
Bandwidth: 150 KHz, Max. continuous current: 70 Arms, Peak current: 200 A
Switch Ratio: 50 mV/A, 5 mV/A, Accuracy: 50 mV/A (0.4 A-10 ApK)±2% , 5
mV/A (1 A-200 ApK) ±2%, 9V battery source
CP4070
CP4070A
CP5030
CP5030A
CP5150
CP5500
DPB4080
Bandwidth: 300 KHz, Max. continuous current: 70 Arms, Peak current: 200 A
Switch Ratio: 100 mV/A, 10 mV/A, Accuracy: 100 mV/A (50 m A-10
ApK)±3%±50 mA , 10 mV/A (500 mA-40 ApK)±4%±50 mA, 10 mV/A (40
A-200 ApK)±15% max, 9 V battery source
Current Probe
Bandwidth: 50 MHz, Max. continuous current: 30 Arms, Peak current: 50 A
Switch Ratio: 100 mV/A, 1 V/A, Accuracy: 1 V/A (±1%±1 mA), 100 mV/A
(±1%±10 mA), DC 12 V/ 1.2 A power adapter
Bandwidth: 100 MHz, Max. continuous current: 30 Arms, Peak current: 50 A
Switch Ratio: 100 mV/A, 1 V/A, Accuracy: 1 V/A (±1%±1 mA), 100 mV/A
(±1%±10 mA), DC 12V/1.2A power adapter
Bandwidth: 12 MHz, Max. continuous current: 150 Arms, Peak current: 300 A
Switch Ratio: 100 mV/A, 10 mV/A, Accuracy: 100 mV/A (±1%±10 mA), 10
mV/A (±1%±100 mA), DC 12 V/1.2 A power adapter
Bandwidth: 5 MHz, Max. continuous current: 500 Arms, Peak current: 750 A
Switch Ratio: 100 mV/A, 10 mV/A, Accuracy: 100 mV/A (±1%±10 mA), 10
mV/A (±1%±100 mA), DC 12 V/1.2 A power adapter
Bandwidth: 50 MHz, Differential Range: 800 V (DC + Peak AC),
Differential Probe
100 X/200 X/500 X/1000 X, Accuracy: ±1%, DC 9 V/1 A power adapter
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Probe
Model
Picture
Description
Bandwidth: 70 MHz, Differential Range: 1500 V (DC + Peak AC),50 X/500 X
DPB5150
Accuracy: ±2%, DC 5 V/1 A USB adapter
Bandwidth: 100 MHz, Differential Range: 1500 V (DC + Peak AC),
DPB5150A
DPB5700
50X/500X , Accuracy: ±2% DC 5 V/1 A USB adapter
Differential Probe
Bandwidth: 70 MHz, Differential Range: 7000 V (DC + Peak AC),
100X/1000X , Accuracy: ±2%,
DC 5 V/1 A USB adapter
Bandwidth: 100 MHz
Differential Range: 7000 V (DC + Peak AC),
100X/1000X
DPB5700A
HPB4010
Accuracy: ±2%
DC 5 V/1 A USB adapter
Bandwidth: 40 MHz
Differential Range: DC 10 KV, AC (rms): 7 KV (sine), AC (Vpp): 20 KV (Pulse)
High Voltage
1000X
Accuracy: ≤3%
The USB Device interface allows a connection into the GPIB interface. USB-
GPIB adapter allows the oscilloscope to easily send and receive commands
through the GPIB. USB follows the USB2.0 specification. GPIB follows the
IEEE488.2 standard.
Isolated front end ISFE
Output signals include square waves, sine, AM, fast edge , pulse, PWM, I2C,
CAN, LIN etc. Used in teaching and demonstrations.
Demo Board
STB-3
Output Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms.
The arbitrary waveforms can be accessed and edited by the EasyWave PC
software
USB AWG Module
Rack Mount
SAG1021
SDS1X-E-RMK
The height is 4U, shared by Two Channels and For Channels
WWW.SIGLENT.COM
SDS1000X-E Series Digital Oscilloscope
Ordering information
SDS1000X-E Series Digital Oscilloscope
SDS1104X-E 100 MHz Four Channels
SDS1204X-E 200 MHz Four Channels
SDS1202X-E 200 MHz Two Channels
USB Cable -1
Product Name
Quick Start -1
Standard Accessories
Passive Probe -4/2
Certification -1
Power Cord -1
16 Channels MSO Software (four channel series only)
16 Channels Logic Analyzer (four channel series only)
AWG Software (four channel series only)
USB AWG Module Hardware (four channel series only)
WIFI Software (four channel series only)
USB WIFI Adapter (four channel series only)
Isolated Front End
SDS1000X-E-16LA
SLA1016
SDS1000X-E-FG
SAG1021
SDS1000X-E-WIFI
TL_WN725N
ISFE
Optional Accessories
STB Demo Source
STB-3
High Voltage Probe
HPB4010
CP4020/CP4050/CP4070/CP4070A/CP5030/CP5030A/
CP5150/CP5500
Current Probes
Differential Probes
Rack Mount
DPB4080/DPB5150/DPB5150A/DPB5700/DPB5700A
SDS1X-E-RMK
WWW.SIGLENT.COM
相关型号:
©2020 ICPDF网 联系我们和版权申明