SE401 [ETC]
USB Video Image Controller; USB视频图像控制器
| 型号： | SE401 |
| 厂家： | 
ETC |
| 描述： | USB Video Image Controller |
| 文件： | 总2页 (文件大小：150K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SE401 USB Video Image Controller
The SE401 USB Video Imager Controller is
designed to form the core of a low-cost USB video
camera. It is a single chip solution to control the
image sensor and move the image data to the
Universal Serial Bus. The only additional major
components required are the CMOS image sensor
and external DRAM to provide working storage for
the compression engine. With the addition of an
audio codec, the SE401 can also support sound,
enabling a variety of audio and video applications.
Features
· Video Imager Interface
· Video Compression Engine
· 16-bit Processor
· USB Interface with 4 Endpoints
· SPORT Audio codec interface
· Internal Clock Generation
(requires only low-cost
internal crystal)
· 1.5K X 16 Internal RAM
· 6K X 16 Internal ROM BIOS
· External Memory Interface
· Serial EEPROM Interface
· Built-in UART
The SE401 consists of a central 16-bit processor,
an EndPoints-proprietary compression engine,
masked ROM, a RAM buffer, a clock generator, and
a flexible, extensible series of interfaces. The block
diagram shows one example of the SE401 and its
interfaces. Other variations can be implemented
using external expansion ROM and the SE401’s
General Purpose Input/Output (GPIO) facilities.
· MS Windows 95, 98 and 2000
drivers available
Block Diagram
EndPoints SE 401
©2001 EndPoints Incorporated. All rights reserved. SE401 is a trademark of EndPoints Incorporated. All other product names and trademark and/or registered
trademarks are the property of their respective owners. Revision 3.2 01/01. EndPoints Incorporated reserves the right to change specifications without notice.
Interfaces directly with Hyundai CIF, VGA and SVGA CMOS sensors. Other
sensors can be supported with the SE401’s flexible GPIO architecture.
Video Imager
Interface
Includes a proprietary image compression engine with variable compression rates.
For maximum performance the compression engine supports DMA to the Frame
Buffer and on to the USB Serial Interface Engine.
Video
Compression
Engine
The SE401 USB Video Imager Controller has a built-in 16-bit EndPoints QT
processor with its basic operating firmware in internal 6K X 16 masked ROM. The
QT processor operates with a specialized instruction set designed for highly
efficient coding of processing algorithms and USB transaction processing.
Functionality of the QT Processor can be extended using external EEPROM
The SE401 USB Video Imager Controller contains a complete USB subsystem with
a Serial Interface Engine (SIE) and built-in transceiver operating at full 12Mbits/sec
data rate. The USB Subsystem meets the Universal Serial Bus (USB) specification
v1.1. In addition to the default control endpoint, the SE401 supports three
additional endpoints, which may be configured as Isochronous or Bulk/Interrupt.
An inexpensive 12 MHz external crystal may be used with the SE401 USB Video
Imager Controller. The controller incorporates PLL circuitry to generate the internal
48MHz clock requirements of the device. Alternatively, an external 12 MHz clock
signal may be used instead of the crystal.
16-bit Processor
USB Subsystem
PLL Clock
Generator
The SE401 USB Video Imager Controller contains 1.5K X 16 of internal buffer
memory. The memory is used for expansion code and data, such as USB packets.
It is accessed by both the processor and the Serial Interface Engine (SIE). USB
control packets are automatically routed to the buffer memory.
Internal
Ram Buffer
Internal 6K X 16 Masked ROM contains a BIOS (Basic Input/Output System) with
functions to manage Power-On initialization, USB Transactions, USB Enumeration,
USB Power Management, Expansion EEPROM Scan support, Memory
Management etc.
6K ROM BIOS
Supports 1200 to 115.2K baud at TTL-levels.
UART Interface
General Purpose
I/O
Up to 32 general purpose I/O signals are available. GPIO may be configured for
special purpose functions such as the SPORT Synchronous Serial Interface for
audio codec etc.
The SE401 USB Video Imager Controller serial EEPROM interface is used to
provide access to external EEPROMs. The interface is implemented using general-
purpose I/O signals and can support a variety of serial EEPROM formats.
A multiplexed address port and 16-bit data port has been provided to interface to
an external SRAM, DRAM or EEPROM with programmable wait states. The port
provides RAS, CAS, RD and WR control signals for data access and refresh cycles
to the DRAM.
Serial EEPROM
Support
External Memory
Interface
Development Tools
C Compiler, Assembler and debugging tools are available to qualified customers.
About EndPoints
EndPoints is a semiconductor company specializing in the digital imaging, networking
and connectivity markets.
EndPoints, Inc. 4 Preston Court Bedford, MA 01730
Ph: 781-276-3900 Fax: 781-275-1758
www.endpoints.com email: info@endpoints.com
©2001 EndPoints Incorporated. All rights reserved. SE401 is a trademark of EndPoints Incorporated. All other product names and trademark and/or registered
trademarks are the property of their respective owners. Revision 3.2 01/01. EndPoints Incorporated reserves the right to change specifications without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明