SK6812RGBW-NW [ETC]
INTEGRATED LIGHT SOURCE INTELLIGENT CONTROL OF CHIP-ON-TOP SMD TYPE LED;型号: | SK6812RGBW-NW |
厂家: | ETC |
描述: | INTEGRATED LIGHT SOURCE INTELLIGENT CONTROL OF CHIP-ON-TOP SMD TYPE LED |
文件: | 总15页 (文件大小:1054K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
SK6812RGBW
SPECIFICATION
INTEGRATED LIGHT SOURCE INTELLIGENT CONTROL OF
CHIP-ON-TOP SMD TYPE LED
Document No.: SPC/ SK6812RGBW-XX
Model No.:
Description:
SK6812RGBW-XX
5.5x5.0x1.6mm Top SMD Type 0.25 Watt Power
tegrated light source Intelligent control LED
Rev. No.:
Date:
01
2015-07-31
ELECTROSTATIC
SENSITIVE DEVICES
Document No.: SPC / SK6812RGBW Rev. No.: 01
1 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
INTEGRATED LIGHT SOURCE INTELLIGENT CONTROL
OF CHIP-ON-TOP SMD TYPE LED
Model: SK6812RGBW
1. Product Overview :
SK6812RGBW is a smart LED control circuit and light emitting circuit in one controlled LED source,
which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the
pixels are contained within the intelligent digital interface input. The output is driven by patented PWM
technology, which effectively guarantees high consistency of the color of the pixels. The control
circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high
precision RC oscillator.
The data protocol being used is unipolar NRZ communication mode. The 32-bit data is transmitted
from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an
internal data latch, the remaining data is passed through the internal amplification circuit and sent out
on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic
shaping forwarding technology makes the number of cascaded pixels without signal transmission only
limited by signal transmission speed.
The LED has a low driving voltage (which allows for environmental protection and energy saving),
high brightness, scattering angle, good consistency, low power, and long life. The control circuit is
integrated in the LED above.
2. Main Application Field:
● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube,
LED appearance / scene lighting
● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical
equipment etc..
3. Description:
● Top SMD internal integrated high quality external control line serial cascade constant current IC;
● control circuit and the chip in SMD 5050 components, to form a complete control of pixel, color
mixing uniformity and consistency;
●built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform
distortion will not guarantee a line;
●The built-in power on reset and reset circuit, the power does not work;
●gray level adjusting circuit (256 level gray scale adjustable);
● red drive special treatment, color balance;
● line data transmission;
● plastic forward strengthening technology, the transmission distance between two points over 10M;
●Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec
4. Mechanical Dimensions:
Notes:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted
Document No.: SPC / SK6812RGBW Rev. No.: 01
2 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
5. PIN configuration
NO.
Symbol
Function description
1
VDD
Power supply LED
Control data signal output
Ground
2
3
4
DOUT
VSS
DIN
Control data signal input
6. General Information
SK6812RGBW-XX
SK6812RGBW: The default is the chips with IC integration
R: RED
620-630NM
G: GREEN 515-525 NM
B: BLUE 460-470 NM
W : White Color
-xx BW Blue White
6000-7000K
NW Natural White 4000-4500K
WS Warm Sunlight 2700-3000K
Document No.: SPC / SK6812RGBW Rev. No.: 01
3 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
7. Absolute Maximum Ratings(Ta=25℃,VSS=0V) :
Parameter
Symbol
VDD
VIN
Range
+3.5~+5.5
-0.5~VDD+0.5
-40~+85
Unit
V
Power supply voltage
Logic input voltage
Working temperature
Storage temperature
ESD pressure
V
Topt
Tstg
VESD
℃
℃
V
-50~+150
4K
8. The electrical parameters (unless otherwise specified, TA=-20 ~ +70 ℃, VDD=4.5 ~ 5.5V,
VSS=0V):
Parmeter
Symbol
VDD
Min
---
Typical
5.2
Max
---
Unit
V
Test conditions
---
The chip
supply voltage
R/G/B port
pressure
VDS,M
AX
---
---
---
---
49
26
---
---
V
---
DOUT conect ground,
the maximum drive
current
IDOH
IDOL
mA
mA
DOUT drive
capability
DOUT conect +, the
largest current
-50
The signal
input flip
threshold
VIH
VIL
3.4
---
---
---
---
V
V
VDD=5.0V
1.6
The frequency
of PWM
FPWM
IDD
---
---
1.2
1
---
---
KHZ
mA
---
---
Static power
consumption
9. The dynamic parameters (Ta=25 ℃):
Parameter
Symbol
fDIN
Min
---
Typical
Max
Unit
KHZ
Test conditions
The speed of data
transmission
The duty ratio of 67%
(data 1)
800
---
TPLH
TPHL
Tr
---
---
---
---
---
---
---
---
500
500
40
ns
ns
ns
ns
DOUT transmission
delay
DIN→DOUT
IOUT Rise/Drop
Time
VDS=1.5
IOUT=9mA
Tf
80
Document No.: SPC / SK6812RGBW Rev. No.: 01
4 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
10. The data transmission time (TH+TL=1.25µs±600ns):
T0H
T0L
T1H
T1L
Trst
0 code, high level time
0 code, low level time
1 code, high level time
1 code, low level time
Reset code,low level time
0.3µs
0.9µs
0.6µs
0.6µs
80µs
±0.15µs
±0.15µs
±0.15µs
±0.15µs
11. Timing waveform:
Input code:
Connection mode:
D1
D2
D3
DIN DO
DIN DO
DIN DO
PIX1
PIX2
PIX3
12. The method of data transmission:
Note: the D1 sends data for MCU, D2, D3, D4 for data forwarding automatic shaping cascade circuit.
Document No.: SPC / SK6812RGBW Rev. No.: 01
5 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
13. The data structure of 32bit:
R7
R6
R5
R4
R3
R2
B6
R1
B5
R0 G7 G6 G5 G4
B4 B3 B2 B1 B0
G3 G2 G1 G0 B7
W7 W6 W5 W4 W3 W2 W1 W0
Note: high starting, in order to send data (R7 - R6 - ...... ..W0)
14. The typical application circuit:
Document No.: SPC / SK6812RGBW Rev. No.: 01
6 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
15. White Color Temperature Ranks & CIE Color Rank (Refer to CIE 1931 chromaticity diagram)
CIE chromaticity coordinates (ANSI Cool White)
C.A
X
Y
C.A
X
Y
C.A
X
Y
C.A
X
Y
0.3048 0.3207
0.3130 0.3290
0.3144 0.3186
0.3068 0.3113
0.3068 0.3113
0.3144 0.3186
0.3161 0.3059
0.3093 0.2993
0.3215 0.3350
0.3290 0.3417
0.3290 0.3300
0.3222 0.3243
0.3222 0.3243
0.3290 0.3300
0.3290 0.3180
0.3231 0.3120
0.3371 0.3490
0.3451 0.3554
0.3440 0.3427
0.3366 0.3369
0.3366 0.3369
0.3440 0.3428
0.3429 0.3307
0.3361 0.3245
0.3028 0.3304
0.3115 0.3391
0.3130 0.3290
0.3048 0.3207
0.3005 0.3415
0.3099 0.3509
0.3115 0.3391
0.3028 0.3304
0.3207 0.3462
0.3290 0.3538
0.3290 0.3417
0.3215 0.3350
0.3196 0.3602
0.3290 0.3690
0.3290 0.3538
0.3207 0.3462
0.3376 0.3616
0.3463 0.3687
0.3451 0.3554
0.3371 0.3490
0.3381 0.3762
0.3480 0.3840
0.3463 0.3687
0.3376 0.3616
0.3115 0.3391
0.3205 0.3481
0.3213 0.3373
0.3130 0.3290
0.3099 0.3509
0.3196 0.3602
0.3205 0.3481
0.3115 0.3391
0.3290 0.3538
0.3376 0.3616
0.3371 0.3490
0.3290 0.3417
0.3290 0.3690
0.3381 0.3762
0.3376 0.3616
0.3290 0.3538
0.3463 0.3687
0.3551 0.3760
0.3533 0.3620
0.3451 0.3554
0.3480 0.3840
0.3571 0.3907
0.3551 0.3760
0.3463 0.3687
0.3130 0.3290
0.3213 0.3373
0.3221 0.3261
0.3144 0.3186
0.3144 0.3186
0.3221 0.3261
0.3231 0.3120
0.3161 0.3059
0.3290 0.3417
0.3371 0.3490
0.3366 0.3369
0.3290 0.3300
0.3290 0.3300
0.3366 0.3369
0.3361 0.3245
0.3290 0.3180
0.3451 0.3554
0.3533 0.3620
0.3515 0.3487
0.3440 0.3427
0.3440 0.3428
0.3515 0.3487
0.3495 0.3339
0.3429 0.3307
C1
C2
C3
C4
C5
D1
D5
E1
E5
C6
D2
D6
E2
E6
C7
D3
D7
E3
E7
C8
D4
D8
E4
E8
ANSI Blue White Color bin structures
Document No.: SPC / SK6812RGBW Rev. No.: 01
7 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
CIE chromaticity coordinates (ANSI Natural white)
C.A
X
Y
C.A
X
Y
C.A
X
Y
C.A
X
Y
0.3530 0.3597
0.3615 0.3659
0.3590 0.3521
0.3512 0.3465
0.3512 0.3465
0.3548 0.3736
0.3641 0.3804
0.3615 0.3659
0.3530 0.3597
0.3571 0.3907
0.3668 0.3957
0.3641 0.3804
0.3548 0.3736
0.3702 0.3722
0.3736 0.3874
0.3869 0.3958
0.3825 0.3798
0.3771 0.4034
0.3916 0.4127
0.3869 0.3958
0.3736 0.3874
0.3941 0.3848
0.3996 0.4015
0.4146 0.4089
0.3641 0.3804
0.3736 0.3874
0.3702 0.3722
0.3615 0.3659
0.3668 0.3957
0.3771 0.4034
0.3736 0.3874
0.3641 0.3804
0.3825 0.3798
0.3869 0.3958
0.4006 0.4044
0.3615 0.3659
0.3702 0.3722
0.3670 0.3578
0.3590 0.3521
F1
F2
F3
F4
0.359
0.367
0.364
0.3521
0.3578
0.344
0.359
0.3521
F5
G1
G5
H6
F6
G2
G6
H2
F7
G3
G7
H1
F8
G4
G8
H5
0.3567 0.3389
0.3495 0.3339
0.3567 0.3389
0.3783 0.3646
0.3825 0.3798
0.367
0.3578
0.3702 0.3722
0.3825 0.3798
0.3783 0.3646
0.395
0.3875
0.395
0.3875
0.3898 0.3716
0.3783 0.3646
0.3898 0.3716
0.3848 0.3565
0.3743 0.3502
0.367
0.3578
0.3916 0.4127
0.4064 0.4221
0.4006 0.4044
0.3869 0.3958
0.3783 0.3646
0.3743 0.3502
0.364
0.344
0.4054 0.4191
0.4217 0.4273
0.4146 0.4089
0.3996 0.4015
0.3889
0.3941 0.3848
0.408 0.3916
0.4017 0.3751
0.369
0.3889
0.369
0.4017 0.3751
0.3957 0.3596
0.408
0.3916
0.384
0.354
ANSI Natural White Color bin structures
3500K
4000K
H6
G7
G6
G2
4500K
H2
F7
G3
F6
F2
H1
F3
G4
G1
H5
F4
G8
F1
G5
F8
F5
Document No.: SPC / SK6812RGBW Rev. No.: 01
8 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
CIE chromaticity coordinates (ANSI Warm White)
C.A
X
Y
C.A
X
Y
C.A
X
Y
C.A
X
Y
0.4082 0.3922
0.3941 0.3848
0.3889 0.3690
0.4017 0.3752
0.4344 0.4032
0.4221 0.3984
0.4147 0.3814
0.4260 0.3853
0.4586 0.4103
0.4465 0.4071
0.4373 0.3893
0.4483 0.3918
0.4146 0.4089
0.3996 0.4015
0.3941 0.3848
0.4082 0.3922
0.4430 0.4212
0.4299 0.4165
0.4221 0.3984
0.4344 0.4032
0.4687 0.4289
0.4562 0.4260
0.4465 0.4071
0.4586 0.4103
0.4299 0.4165
0.4146 0.4089
0.4082 0.3922
0.4221 0.3984
0.4562 0.4260
0.4430 0.4212
0.4344 0.4032
0.4465 0.4071
0.4813 0.4319
0.4687 0.4289
0.4586 0.4103
0.4700 0.4126
0.4221 0.3984
0.4082 0.3922
0.4017 0.3752
0.4147 0.3814
0.4465 0.4071
0.4344 0.4032
0.4260 0.3853
0.4373 0.3893
0.4700 0.4126
0.4586 0.4103
0.4483 0.3918
0.4593 0.3944
H2
H3
H4
H1
K2
L2
K3
L3
K4
L4
K1
L1
ANSI Warm White Color bin structures
Document No.: SPC / SK6812RGBW Rev. No.: 01
9 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
16. Standard LED Performance Graph:
Typical Relative Luminous Flux vs. Forward Current
Forward Voltage vs. Forward Current
150%
120%
150
20
BLUE/GREEN
100%
RED
80%
BLUE\GREEN
60%
RED
40%
20%
0.00
10
1
5.0
4.0
1.0
3.0
Forward Voltage(V) Tj=25 °C
10
15
20
150
2.0
0
0.0
50
Forward Current(mA)
Wavelength Characteristics
Thermal Pad Temperature vs. Relative Light Output
120%
100%
80%
60%
RED
GREEN
BLUE\GREEN
BLUE
100%
WS
NW
80%
BW
60%
RED
40%
20%
0.00
40%
20%
0.00
800
750
20
40
60
80
100
120
450
500 550 600
650 700
0
400
Thermal Pad Temperature (T=25°C)
Wavelength (nm)
Thermal Pad Temperature vs. Forward Current
Typical Radiation Pattern 120°
100
0
80
60
40
20
0
30°
60°
90°
0.4 0.6 0.8 1.0
0.2
75 60 45 30 15
0
90
20
40
60
80
100
120
0
Radiation Angle
Thermal Pad Temperature (°C)
Document No.: SPC / SK6812RGBW Rev. No.: 01
10 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
17. Packaging Standard:
S K 6 8 1 2 R G B W -X X
C A T H O D E ID E N T IF IC A T IO N
C A R R IE R T A P E
C O V E R T A P E
T A P E F E E D D IR E C T IO N
R E E L (1 78 x12m m )
(IN N E R 1 00 0 p cs LE D M A X )
S M D
P R O D U C T N O .: S K 68 12 R G B W -W S
E S D P O L Y E T H Y L E N E B A G
Q U A N T IT Y .: 10 00 P C S
L ot N o.: L W 20 150 709 02-10
W S : 2 700-320 0K
D A T E :20 15-0 8-04
L A B E L S K E T C H IN G
C A R D B O A R D (IN N E R 45 B A G M A X .)
The reel pack is applied in SMD LED. The LEDs are packed in cardboard boxes after packaging in normal or anti-
electrostatic bags. cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The
boxes are not water resistant and therefore must be kept away from water and moisture.
Document No.: SPC / SK6812RGBW Rev. No.: 01
11 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
TOP SMD LED Application Notes
1. Features
The Purposes of making OPSCO’s customers and users to have a clear understanding on the ways how to
use the LED.
2. Description
Generally. The LED can be used the same way as other general purposed semiconductors. When using
OPSCO’s TOP SMD LED, the following precautions must be taken to protect the LED.
3. Cautions
3.1. Dust & Cleaning
This emitter has a silicone surface, There are many benefits to the silicone surface in terms of optical
properties and improved reliability. However, silicone is a softer material and prone to attract dust. While a
minimal amount of dust and debris on the LED will not cause significant reduction in illumination, steps
should be taken to keep the emitter free of dust.
These include keeping the LEDs in the manufacturer’s package prior to assembly and storing assemblies in
an enclosed area after installing the emitters.
Surface condition of this device may change when organic solvents such as trichloroethylene or acetone
were applied.
Avoid using organic solvent, it is recommended that isopropyl be used as a solvent for cleaning the LEDs.
When using other solvents, it should be confirmed beforehand whether the solvents will dissolve the
package and the resin of not.
Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence as ultrasonic
cleaning on the LEDs depends on factors such as ultrasonic power. Baking time and assembled
condition. Before cleaning, a pre-test should be done to confirm whether any damage to the LEDs will
occur.
3.2. Moisture Proof Package
In order to avoid the absorption of moisture during transportation and storage, LED are packed in the
aluminum envelop, A desiccant is included in the aluminum envelop as it absorbs moisture. When
moisture is absorbed into the AMT package it may vaporize and expand during soldering. There is a
possibility that this can cause exfoliation of the contacts and damage to the optical characteristics of the
LEDs. For this reason, the moisture proof package is used to keep moisture to a minimum in the package.
3.3. Storage
In order to avoid the absorption of moisture, It is recommended to store SMD LED (in bulk or taped) in the
dry box (or the desiccator ) with a desiccant, Otherwise to store them in the following environment as
recommended.
a. Temperature: 5℃~30℃
b. Humidity: 60% RH Max
It is recommended to solder the LED as soon as possible after unpacking the aluminum envelop, But in case
that the LED have to be left unused after unpacking envelop again is requested.
The LED should be soldering within 1 hours after opening the package.
If baking is required, A baking treatment should be performed as follows:
70℃±5℃ for more than 24 hours.
Document No.: SPC / SK6812RGBW Rev. No.: 01
12 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
3.4. Reflow Soldering Characteristics
In testing, OPSCO has found S50 LEDs to be compatible with JEDEC J-STD-020C,using the parameters listed below. As a
general guideline OPSCO recommends that users follow the recommended soldering profile provided by the manufacturer
of solder paste used.
Note that this general guideline is offered as a starting point and may require adjustment for certain PCB designs and
Configurations of reflow soldering equipment.
Critical Zone TL to TP
amp-up
L
L
s max
MIN
Ramp down
ts
(Preheat)
T 25°C to Peak
Times
Lead-Free Solder
Profile Feature
Lead-Based Solder
Average Ramp-Up Rate (Ts max to Tp )
3℃/second max.
100℃
3℃/second max.
150℃
Preheat: Temperature Min (Ts min
Preheat: Temperature Min (Ts max
Preheat: Time ( ts min to ts max
)
)
150℃
200℃
)
60-120 seconds
183 ℃
60-180 seconds
217 ℃
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (t L)
Peak/Classification Temperature (T P)
Time Within 5℃ of Actual Peak Temperature ( tp)
Ramp-Down Rate
60-150 seconds
215 ℃
60-150 seconds
255 ℃
<10 seconds
6℃/second max.
<6 minutes max.
<10 seconds
6℃/second max.
<6 minutes max.
Time 25 ℃ to Peak Temperature
Note: All temperatures refer to topside of the package, measured on the package body surface.
Document No.: SPC / SK6812RGBW Rev. No.: 01
13 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
3.5 Heat Generation:
Thermal design of the end product is of paramount importance. Please consider the heat generation of the
LED when making the system design. The coefficient of temperature increase per input electric power is
affected by the thermal resistance of the circuit board and density of LED placement on the board, as well as
components. It is necessary to avoid in tense heat generation and operate within the maximum rating given in
this specification. The operating current should be decided after considering the ambient maximum
temperature of LEDs
3.6 Electrostatic Discharge & Surge Current :
Electrostatic discharge (ESD) or surge current (EOS) may damage LED.
Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of
LED.
All devices, equipment and machinery must be properly grounded.
It is recommended to perform electrical test to screen out ESD failures at final inspection.
It is important to eliminate the possibility of surge current during circuitry design.
3.7 Moisture Proof Package
Cannot take any responsibility for any trouble that are caused by using the LEDs at conditions exceeding
our specifications.
The LED light output is strong enough to injure human eyes. Precautions must be taken to prevent looking
directly at the LEDs with unaided eyes for more than a few seconds.
The formal specification must be exchanged and signed by both parties before large volume purchase begins.
The appearance and specifications of the product may be modified for improvement without notice.
Document No.: SPC / SK6812RGBW Rev. No.: 01
14 / 15
东莞市欧思科光电科技有限公司
DONGGUANG OPSCO OPTOELECTRONICS CO., LTD
Dongguang Factory : Side of fast in the east, Yucai Road, Dongshan Country, Qishi Town, Dongguan City.
Dongguan Tel: (769)82632725
Dongguan Fax: (769)82632735
Change History
FCN No.
Date
Rev. No.
01
Changes/Reason of changes
Initial Document
2015-07-31
Note
Items
Prepared by
Checked by
Approved by
FCN#
Signatures
Kevin Zhu
Date
2015-07-31
Document No.: SPC / SK6812RGBW Rev. No.: 01
15 / 15
相关型号:
SK6812RGBW-WS
INTEGRATED LIGHT SOURCE INTELLIGENT CONTROL OF CHIP-ON-TOP SMD TYPE LEDWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
SK682K010S4
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 10V, 10% +Tol, 10% -Tol, 6800uF,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK682K010ST
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 10V, 10% +Tol, 10% -Tol, 6800uF,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK682K025ET
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 25V, 10% +Tol, 10% -Tol, 6800uF,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK682M010E4
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 10V, 20% +Tol, 20% -Tol, 6800uF,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK682M010ST
85 ⅹC Radial Leaded Aluminum Electorlytic CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK682M016S4
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 16V, 20% +Tol, 20% -Tol, 6800uF,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK682M016ST
85 ⅹC Radial Leaded Aluminum Electorlytic CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK682M025ST
85 ⅹC Radial Leaded Aluminum Electorlytic CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK682M6R3E1
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 6.3V, 20% +Tol, 20% -Tol, 6800uF,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK682M6R3ST
85 ⅹC Radial Leaded Aluminum Electorlytic CapacitorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CDE
SK68B
6A Patch Schottky diode 80V SMB seriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNMATE
©2020 ICPDF网 联系我们和版权申明