SNAP-AIV-HDB [ETC]
SNAP TEX Cables and Breakout Boards;型号: | SNAP-AIV-HDB |
厂家: | ETC |
描述: | SNAP TEX Cables and Breakout Boards |
文件: | 总29页 (文件大小:1312K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SNAP TEX Cables and
Breakout Boards
Features
Extend the terminals on your SNAP I/O modules for
easier, cleaner wiring to field devices.
Six-foot (1.8 meter) wiring cables plug into tops of I/O
modules for quick replacement.
SNAP TEX Family
SNAP TEX Cables
Breakout boards offer options such as fusing, power to
loads, and mechanical relays.
SNAP TEX cables provide convenient connections from I/O
modules to field wiring. Most cables are designed to connect
to breakout boards; some cables have flying leads for direct
connection to field devices.
Specialty cables integrate older G4 digital I/O with
SNAP PAC I/O.
SNAP TEX Breakout Boards
Description
SNAP TEX breakout boards move terminals away from the
crowded rack area for easier installation and maintenance.
Some breakout boards, such as the SNAP-AIMA-HDB, work
only with specific modules; others are designed to be used
with several types of modules. See tables starting on page 2.
SNAP TEX cables and breakout boards are part of the SNAP
TEX family of wiring and mounting accessories. These parts
save time and expense during installation, maintenance, and
debugging by reducing the time and effort required to wire
field devices to SNAP I/O modules.
Choose the cables and breakout boards for your modules
based on the table that starts on page 2.
Part Numbers (continued)
Part
Description
Breakout Boards
Specifications, dimensions, and wiring diagrams begin on
page 5.
32-point breakout board for SNAP I/O
modules
SNAP-TEX-32
16-point breakout board for SNAP I/O
modules, with fuses, fuse-blown indica-
tors, & bussed power (120–240 V)
Part Numbers
SNAP-TEX-FB16-H
Part
Description
16-point breakout board for SNAP I/O
modules, with fuses, fuse-blown indica-
tors, & bussed power (12–24 V)
Cables
SNAP-TEX-FB16-L
SNAP-TEX-MR10-4
SNAP-TEX-MR10-16
6 ft. (1.8 m), 8-wire cable for SNAP I/O
modules. Odd terminals commoned
SNAP-TEX-CBO6
SNAP-TEX-CBE6
Mechanical relay breakout board for a 4-
channel SNAP digital output module
6 ft. (1.8 m), 8-wire cable for SNAP I/O
modules. Even terminals commoned
Mechanical relay breakout board for one
high-density or four 4-channel SNAP dig-
ital output modules.
6 ft. (1.8 m), 8-wire cable for SNAP I/O
modules. Straight-through; no common
terminals.
SNAP-TEX-CBS6
Mechanical relay breakout board for one
high-density or four 4-channel SNAP dig-
SNAP-TEX-MR10-16C ital output modules. Header connector
connects two boards to one high-density
6 ft. (1.8 m) wiring harness assembly for
SNAP 16-point digital modules
SNAP-HD-ACF6
SNAP-HD-BF6
SNAP-HD-CBF6
6 ft. (1.8 m) wiring harness for 32-channel
modules and breakout boards
digital module. Optional jumper straps.
SNAP-IDC-HDB
SNAP-IDC-HDB-FM*
Fused breakout board for SNAP 32-point
digital input modules
6 ft. (1.8 m) wiring harness with flying
leads for most 32-point modules
SNAP-ODC-HDB
SNAP-ODC-HDB-FM*
Fused breakout board for SNAP 32-point
digital output modules
6 ft. (1.8 m) header cable for SNAP-ODC-
32-SNK and SNAP-IDC-32 digital modules
and G4PB16H and G4PB16HC mounting
racks. Also for SNAP-ODC-32-SRC when
connecting to a SNAP-MR10-16C break-
out board.
Breakout boards for SNAP-AIMA-32 and
SNAP-AIMA-32-FM analog input mod-
ules
SNAP-HD-G4F6
SNAP-HD-G4F6N
SNAP-AIMA-HDB
SNAP-AIMA-HDB-FM*
SNAP-AIV-HDB
SNAP-AIV-HDB-FM*
Breakout boards for SNAP-AIV-32 and
SNAP-AIV-32-FM analog modules
6 ft. (1.8 m) header cable for SNAP-IDC-
32N digital modules and G4PB16H and
G4PB16HC mounting racks
* Factory Mutual approved
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
1
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
Module, Breakout Board, and Cable Compatibility Charts
Look in the left column for the module you have. Choose the breakout board in the right columns. Compatible cables are shown in
the table cells in the center.
4-Channel Digital Modules
Breakout Board
SNAP-TEX-MR10-4
SNAP-TEX-MR10-16
SNAP-TEX-MR10-16C
Module
SNAP-TEX-FB16-H
SNAP-TEX-FB16-L
SNAP-TEX-32
Digital input modules—4-channel
SNAP-IAC5
SNAP-IAC5A
SNAP-IAC5AFM
SNAP-IAC5FM
SNAP-IAC5MA
SNAP-IDC5
SNAP-IDC5-FAST-A
SNAP-IDC5-HT
SNAP-IDC5-SW
SNAP-IDC5-SW-NC
SNAP-IDC5D
SNAP-TEX-CBE6
SNAP-TEX-CBO6
SNAP-TEX-CBS6
SNAP-TEX-CBO6
SNAP-TEX-CBS6
Not used for inputs
SNAP-IDC5DFM
SNAP-IDC5FAST
SNAP-IDC5FM
SNAP-IDC5G
SNAP-IDC5MA
SNAP-IDC5Q
Digital output modules—4-channel
SNAP-ODC5-I
SNAP-TEX-CBS6
SNAP-TEX-CBO6
SNAP-TEX-CBE6
SNAP-ODC5-IFM
SNAP-ODC5A-I
SNAP-ODC5A-IFM
SNAP-TEX-CBS6
SNAP-TEX-CBO6
SNAP-TEX-CBO6
Not used
SNAP-OAC5-I
SNAP-TEX-CBS6
SNAP-TEX-CBO6
SNAP-TEX-CBE6
SNAP-OAC5-IFM
SNAP-OAC5MA
SNAP-ODC5MA
SNAP-TEX-CBS6
SNAP-TEX-CBO6
SNAP-TEX-CBS6
SNAP-TEX-CBO6
SNAP-TEX-CBS6
SNAP-TEX-CBO6
SNAP-TEX-CBO6
SNAP-TEX-CBS6
SNAP-ODC5SRC
SNAP-OAC5
SNAP-OAC5FM
SNAP-ODC5ASNK
SNAP-ODC5R
SNAP-ODC5R5
SNAP-TEX-CBS6
SNAP-TEX-CBO6
SNAP-TEX-CBS6
SNAP-TEX-CBO6
Not used
SNAP-ODC5R5FM
SNAP-ODC5RFM
SNAP-ODC5SNK
SNAP-ODC5SNKFM
SNAP-ODC5SRCFM
SNAP-OMR6-A
SNAP-OMR6-C
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
2
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
Module, Breakout Board, and Cable Compatibility Charts (continued)
Look in the left column for the module you have. Choose the breakout board in the right columns. Compatible cables are shown in
the table cells in the center.
1-, 2-, and 4-Channel Analog Modules
Module
Breakout Board
SNAP-TEX-MR10-4
SNAP-TEX-MR10-16
SNAP-TEX-MR10-16C
SNAP-TEX-FB16-H
SNAP-TEX-FB16-L
SNAP-TEX-32
Analog input modules (not thermocouples)
SNAP-AIMV2-4
SNAP-AIV-4
SNAP-AIR40K-4
SNAP-AIMA-4
SNAP-AIMV-4
SNAP-TEX-CBS6
SNAP-TEX-CBE6
Not used for analog modules
SNAP-AIMA
SNAP-AIMA-i
SNAP-AIV-72
SNAP-AIVRMS
SNAP-AIV
SNAP-AIMA2-i
SNAP-AIV-i
SNAP-AIV2-i
SNAP-AIARMS
SNAP-AICTD
SNAP-AIRATE
SNAP-AIRTD
SNAP-AIRTD-10
SNAP-AIRTD-1K
SNAP-AICTD-4
SNAP-AIARMS-i
SNAP-AIARMS-i-FM
SNAP-AIVRMS-i
SNAP-AIVRMS-i-FM
SNAP-AIPM
SNAP-TEX-CBS6 Not used for analog modules
SNAP-AIPM-3V
SNAP-AILC
SNAP-AITM-i **
SNAP-AITM2-i **
SNAP-AITM-4i **
SNAP-AITM **
SNAP-AILC-2
SNAP-pH/ORP
SNAP-AIMA-iSRC
No cable available Not used for analog modules
SNAP-TEX-CBS6 Not used for analog modules
SNAP-AIMA-iSRC-FM SNAP-AITM-2 **
SNAP-AIPM-3*
Analog output modules
SNAP-AOA-23
SNAP-AOA-28
SNAP-AOA-3
SNAP-AOV-25
SNAP-AOV-27
SNAP-AOV-5
SNAP-AOA-23-iSRC
SNAP-AOA-23-iSRC-FM
SNAP-TEX-CBS6
SNAP-AOD-29
Not used for analog modules
SNAP-TEX-CBE6
* Not recommended for use with breakout boards due to CT safety concerns.
** Do not use breakout boards with thermocouples.
High-Density Digital Modules
Breakout Board
Without a
breakout
board
SNAP-TEX-MR10-4
SNAP-TEX-MR10-16
SNAP-TEX-MR10-16C
Module
SNAP-TEX-FB16-H
SNAP-TEX-FB16-L
SNAP-IDC-HDB
SNAP-IDC-HDB-FM SNAP-ODC-HDB-FM
SNAP-ODC-HDB
SNAP-TEX-32
SNAP-IAC-16
SNAP-IAC-A-16
SNAP-IAC-K-16
SNAP-IDC-16
SNAP-HD-ACF6
(2 modules/board)
SNAP-HD-ACF6
SNAP-HD-ACF6
SNAP-IDC-HT-16
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
3
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
Breakout Board
Without a
breakout
board
SNAP-TEX-MR10-4
SNAP-TEX-MR10-16
SNAP-TEX-MR10-16C
Module
SNAP-TEX-FB16-H
SNAP-TEX-FB16-L
SNAP-IDC-HDB
SNAP-IDC-HDB-FM SNAP-ODC-HDB-FM
SNAP-ODC-HDB
SNAP-TEX-32
SNAP-IDC-32
SNAP-IDC-32-FM
SNAP-IDC-32N
SNAP-IDC-32D
SNAP-IDC-32DN
SNAP-HD-CBF6
(2 boards/module)
SNAP-HD-CBF6
SNAP-HD-BF6
SNAP-HD-CBF6
SNAP-HD-CBF6
SNAP-ODC-32-SNK
SNAP-ODC-32-SNK-FM
Do not use
SNAP-HD-CBF6
(2 boards/module)
SNAP-HD-CBF6
SNAP-HD-BF6
SNAP-HD-CBF6
SNAP-HD-G4F6
(MR10-16C only)
SNAP-ODC-32-SRC
SNAP-ODC-32-SRC-FM
Analog Modules with More Than 4 Points
Breakout Board
Module
SNAP-AITM-8
SNAP-AITM-8-FM
SNAP-AIV-8
SNAP-AIMA-8
SNAP-AICTD-8
Can be used; no cable Not used with analog mod-
currently available
ules
SNAP-AIV-32
SNAP-AIV-32-FM
SNAP-HD-CBF6
SNAP-HD-BF6 SNAP-HD-CBF6
Not recommended
Not used with analog mod-
ules
SNAP-AIMA-32
SNAP-AIMA-32-FM
Not recommended
SNAP-HD-BF6
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
4
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-CBO6, SNAP-TEX-CBE6, SNAP-TEX-CBS6 Cables
These three cables provide neat, protected wiring from the
top of the module to the breakout board. Each cable snaps
into the top of one module and terminates at the breakout
board with 18-gauge, color-coded flying leads, already
stripped and ready for wiring. The leads attach easily to the
breakout board with spring connectors.
SNAP-TEX-CBE6—Even-numbered terminals are
commoned.
SNAP-TEX-CBS6—No common terminals; wiring is straight
through.
See the table starting on page 2 to determine the correct
cable for your module and breakout board.
SNAP-TEX-CBO6—Odd-numbered terminals are
commoned.
This photo shows the contrast between a
regularly wired SNAP PAC rack (at upper
left) and one using SNAP-TEX-CBE6, -CBO6,
and -CBS6 cables (at lower right).
The cables protect top-of-module
connections and wires, and make it easier
to follow wiring to field devices.
Cables terminate in color-coded flying
leads, already stripped and ready for wiring.
Installation, maintenance, and
troubleshooting are faster and simpler
using the SNAP TEX cables.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
5
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-CBO6, SNAP-TEX-CBE6, SNAP-TEX-CBS6 Cables (continued)
Cable Specifications
Feature
SNAP-TEX-CBO6
6 feet (1.8 meters)
8 pins, 0.2 in. (5.08 mm) center- 8 pins, 0.2 in. (5.08 mm) center-to- 8 pins, 0.2 in. (5.08 mm) center-
SNAP-TEX-CBE6
SNAP-TEX-CBS6
Cable length
Connector
6 feet (1.8 meters)
6 feet (1.8 meters)
to-center
center
to-center
8 pre-stripped, color-coded, 18
gauge
8 pre-stripped, color-coded, 18
gauge
8 pre-stripped, color-coded, 18
gauge
Wires
Bussing
Odd-numbered pins connected
CE, RoHS, DFARS
30 months
Even-numbered pins connected* No connected
Agency Approvals
Warranty
CE, RoHS, DFARS
30 months
CE, RoHS, DFARS
30 months
*Do NOT USE the CBE6 with a SNAP-TEX-FB16-H or -L breakout board. The FB16s have odd-numbered pins connected.
Wire Colors
Point Pin
Color wire
black
Point Pin
Color wire
yellow
1
5
0
2
2
red
6
brown
3
blue
7
red/black
blue/black
1
3
4
orange
8
Compatible SNAP I/O Modules
See table starting on page 2 for detailed module, cable, and breakout board compatibility.
Modules
SNAP-TEX-CBO6
SNAP-TEX-CBE6
SNAP-TEX-CBS6
SNAP 4-channel digital input
and output modules
SNAP 4-channel digital input
modules
SNAP 4-channel digital input and
output modules
Isolated and -MA digital output
modules
Most 1-, 2-, and 4-channel analog
modules
Use with
4-channel analog modules, except
SNAP-AICTD-4
SNAP-AOD-29
Thermocouples
Analog modules
Fused digital output modules
Thermocouples
Thermocouples
Modules with more than 4 points
SNAP-AITM family, SNAP-pH/ORP,
SNAP-AILC family,
DO NOT use with Modules with more than 4 points Analog modules not listed above
Modules with more than 4 points
SNAP-AIMA-iSRC
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
6
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-HD-ACF6, SNAP-HD-CBF6, and SNAP-HD-BF6 Cables
The SNAP-HD-ACF6, SNAP-HD-CBF6, and SNAP-HD-BF6
cables connect 16- and 32-channel modules to field wiring
or breakout boards. Each cable is 6 ft. (1.8 m) long.
The SNAP-HD-ACF6 and the SNAP-HD-CBF6 have
connectors at one end that attach to the top of a module and
flying leads at the other end for field wiring. The ACF6 is for
16-channel modules and the CBF6 is for 32-channel
modules.
The SNAP-HD-BF6 has connectors at both ends, one for a
32-channel module and the other for a suitable breakout
rack.
SNAP-HD-CBF6
SNAP-HD-BF6
Cable Specifications
See table starting on page 2 for detailed module, cable, and breakout board compatibility.
Feature
Cable length 6 feet (1.8 meters)
Two-connector assembly at
SNAP-HD-ACF6
SNAP-HD-CBF6
6 feet (1.8 meters)
SNAP-HD-BF6
6 feet (1.8 meters)
One 40-pin connector at module One connector at module end; one con-
end; flying leads at other end
Connectors
module end, each with 16
nector at breakout board end
pins; flying leads at other end
Pre-stripped, color-coded,
22-gauge wires
Pre-stripped, color-coded,
24-gauge wires
Wires
24 gauge wires
Modules:
SNAP-IDC-32
Modules to breakout boards
SNAP-IDC-32-FM
SNAP-IDC-32N
SNAP-IDC-32D
SNAP-IDC-32DN
SNAP-ODC-32-SNK
SNAP-ODC-32-SNK-FM
SNAP-ODC-32-SRC
SNAP-ODC-32-SRC-FM
SNAP-AIV-32
(regular and -FM versions):
Modules:
SNAP-IDC-32 to SNAP-IDC-HDB
SNAP-IDC-32N to SNAP-IDC-HDB
SNAP-IDC-32D to SNAP-IDC-HDB
SNAP-IDC-32DN to SNAP-IDC-HDB
SNAP-ODC-32-SNK to SNAP-ODC-HDB
SNAP-ODC-32-SRC to SNAP-ODC-HDB
SNAP-AIV-32 to SNAP-AIV-HDB
SNAP-AIMA-32 to SNAP-AIMA-HDB
SNAP-IAC-16
SNAP-IAC-A-16
SNAP-IAC-K-16
SNAP-IDC-16
SNAP-IDC-HT-16
Use with
SNAP-AIV-32-FM
Agency
Approvals
CE, RoHS, DFARS
30 months
CE, RoHS, DFARS
30 months
CE, RoHS, DFARS
30 months
Warranty
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
7
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-HD-ACF6, SNAP-HD-CBF6, and SNAP-HD-BF6 Cables (continued)
Wiring—From SNAP-HD-ACF6 Cable to SNAP 16-Point Digital Module
The following diagram shows16-channel module connector wiring for the SNAP-HD-ACF6 wiring harness. Applies to the
following modules (top view of module):
SNAP-IDC-16
SNAP-IAC-16
SNAP-IDC-HT-16
SNAP-IAC-A-16
SNAP-IAC-K-16
Port for OptoTerminal-G20
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
8
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-HD-ACF6, SNAP-HD-CBF6, and SNAP-HD-BF6 Cables (continued)
Wiring—SNAP-HD-CBF6 Cable
The following table shows 32-channel module connector wiring for the SNAP-HD-CBF6 wiring harness. Wires from the wiring
harness are grouped into four sets. Each set contains color-coded wires.
Set A
Wires
Set B
Wires
Set C
Wires
Set D
Wires
Point
Point
Point
Poin
t
A0
A1
A2
A3
A4
A5
A6
A7
Gray
Blue
0
1
B0
B1
B2
B3
B4
B5
B6
B7
Gray
Blue
8
9
C0
C1
C2
C3
C4
C5
C6
C7
Gray
Blue
16
17
D0
D1
D2
D3
D4
D5
D6
D7
Gray
Blue
24
25
Yellow
Red
2
Yellow
Red
10
11
Yellow
Red
18
Yellow
Red
26
3
19
27
White
Violet
Green
Orange
4
White
Violet
Green
Orange
12
13
14
15
com
White
Violet
Green
Orange
20
White
Violet
Green
Orange
28
5
21
29
6
22
30
7
23
31
ACOM Blk/Brn
com
BCOM Blk/Brn
CCOM Blk/Brn
com
DCOM Blk/Brn
com
The four sets relate to point numbers on the module as shown below.
Harness
Pin
Pin
Harness
Wire Color Number Signal
Signal Number Wire Color
Gray
Blue
Yellow
Red
40
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
A0
A1
A2
A4
39
37
35
33
31
29
27
25
23
21
19
17
15
13
11
9
White
Violet
A5
A6
Green
Orange
Brown
White
Violet
A3
A7
Black
Gray
Blue
ACOM
B0
ACOM
B4
B1
B5
Yellow
Red
B2
B3
B6
B7
Green
Orange
Brown
White
Violet
Black
Gray
Blue
BCOM
C0
BCOM
C4
C5
C1
Yellow
Red
Black
Gray
Blue
C2
C6
Green
Orange
Brown
White
Violet
C3
CCOM
D0
C7
CCOM
D4
D1
D5
7
Yellow
Red
6
D2
D6
5
Green
Orange
Brown
4
D3
D7
3
Black
2
DCOM
DCOM
1
Connector wiring for SNAP-ODC-32-SNK, SNAP-ODC-32-SRC, SNAP-IDC-32,
-FM versions, SNAP-IDC-32N, and SNAP-IDC-32DN (top view of module)
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
9
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-HD-G4F6 and SNAP-HD-G4F6N Cables
The SNAP-HD-G4F6 and SNAP-HD-G4F6N cables are used to
connect a SNAP high-density digital (HDD) module to G4
mounting racks in order to integrate older G4 (or even G1)
digital output systems with modern PAC Project software and
SNAP PAC Ethernet-based controllers.
The header cable connects two 16-channel mounting racks to
one 32-channel digital module. The cable can also be used to
connect G1 mounting racks with header connectors to these
modules. See the table below for module and rack
compatibility.
For outputs, this connection makes available the G4 output’s
up to 3-amp switching and sensing capability, which can
provide twelve times the 0.25 amp capability of the high-
density digital modules themselves. (For details of individual
G4 module capabilities, see Opto 22 form #727, the G4 Digital
I/O Data Book.)
The SNAP-HD-G4F6 cable can also be used to connect two
SNAP-TEX-MR10-16C breakout boards to one 32-channel
digital module. See “SNAP-TEX-MR10-16C Breakout Board” on
page 19.
For more information on HDD modules, see form #1556, the
SNAP High-Density Digital Module Data Sheet.
SNAP-HD-G4F6 header cable
G4PB16H mounting racks
SNAP-ODC-32-
SNK module
In this photo, the SNAP-HD-G4F6 header cable
connects a single SNAP-ODC-32-SNK digital output
module on a SNAP PAC mounting rack to two
G4PB16H mounting racks.
SNAP mounting rack
NOTE: Do not use this cable with a SNAP-ODC-32-SRC
module when connecting to G4 mounting racks.
SNAP-HD-G4F6 and SNAP-HD-G4F6N Cables—Compatible Modules and Racks
Cable
Modules
Racks
Integrated I/O
SNAP-ODC-32-SNK
SNAP-ODC-32-SNK-FM G4PB16HC
G4PB16H
PB16H
PB16HC
SNAP-HD-G4F6
G4PB16L PB16L
SNAP-IDC-32N*
SNAP-IDC-32DN*
G4PB16H
G4PB16HC
PB16H
PB16HC
SNAP-HD-G4F6N
–
* For 15 volt or 24 volt G1 or G4 modules, use the SNAP-IDC-32N.
For 5 volt modules, use the SNAP-IDC-32DN.
NOTE: While not designed for this use, it is possible to connect
the SNAP-IDC-32 module with G4 15 or 24 V inputs using a
SNAP-HD-G4F6 cable. However, the SNAP-IDC-32 uses
positive-true logic and therefore returns the inverse of the
typical negative-true logic. For example, if the SNAP-IDC-32 is
controlled by a PAC Control strategy, an “OFF” state from it
actually indicates that the associated G4 module is turned ON.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
10
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L Breakout Boards
The SNAP-TEX-32 is a simple breakout board with straight-
through wiring. Designed primarily for 2- and 4-channel
analog inputs/outputs and for 4-channel digital inputs, the
breakout board is used with SNAP-TEX cables.
you’re using. These breakout boards are used primarily for
digital inputs and outputs.
CAUTION: Odd pins on the SNAP-TEX-FB16-H and SNAP-TEX-
FB16-L breakout boards are commoned. Use only straight-
through or odd cables with these boards.
The SNAP-TEX-32 can also be used with 8-, 16-, or 32-channel
SNAP analog modules (not thermocouples). See the table
beginning on page 2 for recommended cable and board
combinations for your modules.
The SNAP-TEX-FB16-H and SNAP-TEX-FB16-L breakout
boards provide a fuse and a fuse-blown indicator for each of
their 16 channels. In addition, they provide power to loads:
the SNAP-TEX-F16-H provides 120–240 volts, and the SNAP-
TEX-F16-L provides 12–24 volts. Simply attach the power
source to a single spot in the middle of the rack, and power
goes out to solenoids or switches, depending on the module
SNAP-TEX-FB16-H
Specifications
See the table beginning on page 2 for recommended cable and board combinations.
Feature
SNAP-TEX-32
SNAP-TEX-FB16-H
SNAP-TEX-FB16-L
2- or 4-channel analog inputs/
outputs; 4-channel digital inputs/
outputs *
Use with I/O
modules
4-channel digital inputs and outputs
16- and 32-ch digital inputs/outputs
4-channel digital inputs and outputs
16- and 32-ch digital inputs/outputs
4-ch modules: SNAP-TEX-CBO6
(odd pins connected)** or SNAP-
TEX-CBS6 (straight-through),
depending on module.
16-ch modules: SNAP-HD-ACF6
32-ch modules: SNAP-HD-CBF6
4-ch modules: SNAP-TEX-CBO6
(odd pins connected)** or SNAP-
TEX-CBS6 (straight-through),
depending on module.
16-ch modules: SNAP-HD-ACF6
32-ch modules: SNAP-HD-CBF6
SNAP-TEX-CBE6 (even pins
connected), SNAP-TEX-CBO6
Use with cables (odd pins connected), or SNAP-
TEX-CBS6 (no connections),
depending on module.
32 spring connectors; accommo- 16 spring connectors; accommo-
16 spring connectors; accommo-
dates four 4-channel modules
Connectors
Fusing
dates eight 4-channel modules
dates four 4-channel modules
1 A, 250 V, fast-acting fuse for each 1 A, 250 V, fast-acting fuse for each
none
I/O point (16 total). Replace with
Opto 22 PN FUSE01G4
I/O point (16 total). Replace with
Opto 22 PN FUSE01G4
Indicators
none
none
1 LED per fuse (16 LEDs total)
120–240 V
1 LED per fuse (16 LEDs total)
12–24 V
Bussed power
Agency Approv-
als
CE, RoHS, DFARS
30 months
CE, RoHS, DFARS
30 months
CE, RoHS, DFARS
30 months
Warranty
* Can also be used with 8-, 16-, or 32-channel digital and analog inputs (not thermocouples).
** IMPORTANT: Do NOT USE the FB16 breakout boards with a SNAP-TEX-CBE6 cable. The board has odd pins connected; the
cable has even pins connected.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
11
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-F32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L (continued)
Dimensions—SNAP-TEX-32 Breakout Board
Dimensions are shown in inches (with centimeters in parentheses).
Dimensions—SNAP-TEX-FB16-H and SNAP-TEX-FB16-L Breakout Boards
Dimensions are shown in inches (with centimeters in parentheses).
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
12
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-F32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L (continued)
Wiring—SNAP-TEX-32 Breakout Board
1 Black
2 Red
3 Blue
4 Orange
5 Yellow
6 Brown
7 Red/blk
8 Blue/blk
This diagram shows wiring with a
SNAP-TEX cable going to a 4-channel
module. If you are using the breakout
board with other cables going to 16- or
32-channel modules, see the cable’s data
sheet for wire colors and wiring details.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
13
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-F32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L (continued)
Wiring—SNAP-TEX-FB16-H and SNAP-TEX-FB16-L Breakout Boards
CAUTION: Do NOT use the SNAP-TEX-
CBE6 (even pins commoned) cable
with this board. The board has odd
pins commoned.
This diagram shows wiring with SNAP-CBO6
or SNAP-CBS6 cables coming from 4-channel
modules. If you are using the breakout board
with a SNAP-HD-CBF6 cable coming from 32-
channel modules, see page 15.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
14
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-F32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L (continued)
Wiring—SNAP-TEX-FB16-L Breakout Board
This diagram shows wiring with a
SNAP-HD-CBF6 cable coming from a
32-channel module (SNAP-ODC-32-
SRC or SNAP-ODC-32-SNK).
Each module requires two boards.
If you are using the board with 4-channel
modules, see the previous page..
ACOM Black
A0 Gray
SNAP-HD-CBF6 cable
A1 Blue
A2 Yellow
A3 Red
ACOM Brown
A4 White
A5 Violet
A6 Green
A7 Orange
Fuse Common
Module Common
For SRC module, module
common is positive, and
field commons (1, 3, 5,
and 7) are negative.
BCOM Black
B0 Gray
B1 Blue
For SNK module, module
common is negative, and
field commons (1, 3, 5,
and 7) are positive.
B2 Yellow
B3 Red
BCOM Brown
B4 White
B5 Violet
B6 Green
B7 Orange
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
15
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 Breakout Boards
The SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 breakout
boards, designed for high-current switching, feature
mechanical relays that can switch up to 10 A per channel.
(Standard SNAP output modules can switch up to 0.75 A;
SNAP-OMR6 output modules can switch up to 6 A.)
These breakout boards include on/off indicators for each
channel, and each channel can be wired for normally closed
or normally open. The boards require 24 VDC power.
A replacement relay is available, part number SNAP-MR10.
Also see “SNAP-TEX-MR10-16C Breakout Board” on page 19.
SNAP-TEX-MR10-16
Specifications
See the tables beginning on page 2 for compatible modules and cables.
Feature
SNAP-TEX-MR10-4
SNAP-TEX-MR10-16
SNAP-ODC5-i, SNAP-ODC5A-i,
SNAP-ODC5SRC, SNAP-ODC-32-SRC
SNAP-ODC5-i, SNAP-ODC5A-i,
SNAP-ODC5SRC, SNAP-ODC-32-SRC
Use with I/O modules
SNAP-TEX-CBO6 (odd pins bussed),SNAP-TEX- SNAP-TEX-CBO6 (odd pins bussed),SNAP-TEX-
Use with cables
Relay contacts
CBS6 (no bussing), or SNAP-HD-CBF6, depend-
ing on module.
CBS6 (no bussing), or SNAP-HD-CBF6, depending
on module.
SPDT (1 Form C)
Typical life expectancy (Electrical): 1 x 105
SPDT (1 Form C)
Typical life expectancy (Electrical): 1 x 105
Switching capacity
Switch On time
Switch Off time
Fusing
10 A @ 240 VAC
7 ms nominal
3 ms nominal
10 A @ 240 VAC
7 ms nominal
3 ms nominal
24 V fuse for board. Opto 22 p/n SNAP-FUSE1AC 24 V fuse for board. Opto 22 p/n SNAP-FUSE1AC
4 On/Off status indicators (one for each channel)
1 fuse-blown indicator
16 On/Off status indicators (one for each channel)
1 fuse-blown indicator
Indicators
Power requirements
(all positions On)
24 VDC @ 75 mA
24 VDC @ 300 mA
Agency Approvals
Warranty
CE, RoHS, DFARS
CE, RoHS, DFARS
30 months from date of manufacture
30 months from date of manufacture
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
16
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 Breakout Boards (continued)
Dimensional Drawing—SNAP-TEX-MR10-16 Breakout Board
Dimensions are shown in inches (with centimeters in parentheses).
Dimensional Drawing—SNAP-TEX-MR10-4 Breakout Board
Dimensions are shown in inches (with centimeters in parentheses).
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
17
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 Breakout Boards (continued)
Wiring Diagram—SNAP-TEX-MR10-4 Breakout Board
The example below shows wiring from the first two points of a SNAP-ODC5-i output module to a SNAP-TEX-MR10-4 board.
Wire colors shown are for a SNAP-TEX-CBO6 cable. Wiring is similar for a SNAP-TEX-MR10-16 board, which has 16 channels
rather than four.
This board can also be used with other modules and cables; see the compatibility tables starting on page 2.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
18
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-MR10-16C Breakout Board
The SNAP-TEX-MR10-16C breakout board, designed for
high-voltage/high-current switching, features mechanical
relays that can switch up to 10 A per channel. (Standard SNAP
output modules can switch up to 0.75 A; SNAP-OMR6 output
modules can switch up to 6 A.)
This breakout board includes on/off indicators for each
channel, and each channel can be wired for normally closed
or normally open. The boards require 24 VDC power.
This board allows you to connect digital output modules in
two ways:
SNAP-TEX-MR10-16C
Mechanical relays
•
Connect 4 standard four-channel ODC modules using the
two spring connectors and the appropriate cable for the
modules. See page 20.
•
Connect one SNAP-ODC-32-SRC high-density module to
the header connectors on two MR10-16C breakout boards.
Requires a SNAP-HD-G4F6 cable.
Spring connectors for
standard, 4-channel
ODC modules
Bussed commons in 2-channel groups provide easier wiring
of loads. Bussing straps (STRAP2Q and STRAP4Q) can be used
for quick common power connections between relay groups.
See page 21.
Header connector for high-density
SNAP-ODC-32-SRC module
A replacement relay is available, part number SNAP-MR10.
Field connectors
Also see “SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 Breakout
Boards” on page 16.
Specifications
Also see the tables beginning on page 2 for compatible modules and cables.
Feature
Use with I/O modules
SNAP-TEX-MR10-16C
SNAP-ODC5-i, SNAP-ODC5A-i,
SNAP-ODC5SRC, SNAP-ODC-32-SRC
•
•
For one high-density SNAP-ODC-32-SRC module, use a SNAP-HD-G4F6 cable to
connect two breakout boards to one SNAP-ODC-32-SRC module.
Use with cables
For four standard modules, use SNAP-TEX-CBO6 (odd pins bussed),SNAP-TEX-
CBS6 (no bussing), or SNAP-HD-CBF6, depending on module.
Use with jumper straps
Relay contacts
STRAP2Q, STRAP4Q
SPDT (1 Form C)
Typical life expectancy (Electrical): 1 x 105
Switching capacity
Switch On time
Switch Off time
Fusing
10 A @ 250 VAC
7 ms nominal
3 ms nominal
24 V fuse for board. Opto 22 p/n SNAP-FUSE1AC
16 On/Off status indicators (one for each channel)
1 fuse-blown indicator
Indicators
Power requirements (all positions On) 24 VDC @ 300 mA
Agency Approvals
Warranty
CE, RoHS, DFARS
30 months from date of manufacture
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
19
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-MR10-16C Breakout Board (continued)
Dimensional Drawing—SNAP-TEX-MR10-16C Breakout Board
Dimensions are shown in inches (with centimeters in parentheses).
Wiring Diagram—Connecting Four-Channel ODC Modules to SNAP-TEX-MR10-16C
The example below shows wiring a SNAP-ODC5-i output module to a SNAP-TEX-MR10-16C board. Two four-channel ODC
modules can be wired to each of the two spring connectors. Wire colors shown are for a SNAP-TEX-CBO6 cable.
This board can also be used with other modules and cables; see the compatibility tables starting on page 2.
Jumpers required for the
SNAP-ODC5-I module.
They are not required for
the SNAP-ODC5SRC.
Pins 4-7 to the next ODC module
FUSED +24V
+
–
+
+
24V INPUT
SNAP-ODC5-i
Wire colors shown are
for SNAP-TEX-CBO6
One of two spring connectors
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
20
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-TEX-MR10-16C Breakout Board (continued)
Wiring Diagram—SNAP-TEX-MR10-16C Relay Group
The diagram below shows relays 0 and 1 in a relay group.
NO
NC
C
NO
NC
NO
0
NO
1
C
NC
NC
Terminals 0 and 1
Jumper Straps—SNAP-TEX-MR10-16C Breakout Board
This diagram shows an example using jumper straps, Opto 22 part numbers STRAP2Q and STRAP4Q.
COMMON
COMMON
0
NC
NO NO
NO
7
NC
8
NC
NO NO
10
NC NC
NO NO
11 12
NC NC
NO NO
13 14
NC NC
NO
15
NC
C
1
2
C
3
4
C
5
6
C
C
9
C
C
C
NC NC
NC NC
NC NC
STRAP4Q
STRAP2Q
Traces on board
STRAP4Q
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
21
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-IDC-HDB and SNAP-ODC-HDB Breakout Boards
SNAP-IDC-HDB, SNAP-IDC-HDB-FM, SNAP-ODC-HDB, and
SNAP-ODC-HDB-FM breakout boards provide LED indicators
and easily accessible fused connectors for points on 32-
channel digital input or output modules.
See Opto 22 form 1547, the High-Density Module User’s Guide,
for SNAP-IDC-HDB and SNAP-ODC-HDB breakout rack wiring
and jumper settings.
Specifications
SNAP-IDC-HDB and SNAP-IDC-HDB-FM Breakout Racks for High-Density Digital Input Modules
Used with
SNAP-IDC-32, SNAP-IDC-32-FM, SNAP-IDC-32N, and SNAP-IDC-32DN
40-pin header connects to 32-channel input module using SNAP-HD-BF6 header cable.
32 signal input connectors; each signal connector has a corresponding common connector.
For each zone of 8 signal inputs, 1 connection for either module common or field common.
Connectors
1 LED for each signal input (32 signal LEDs total)
1 power status LED for each zone of 8 signal inputs (4 power LEDs total)
Indicators
Fusing
1 A fuses; 2 fuses for each zone of 8 signal inputs (8 fuses total)
Replace with Pudenz 1 A automobile mini-fuse or equivalent.
For each zone of 8 signal inputs, 1 jumper controls whether module common or field common
is used.
Jumpers
Voltage
32 VDC maximum, 12-24 VDC nominal
Agency
SNAP-IDC-HDB: UL, CE, RoHS, DFARS
Approvals
SNAP-IDC-HDB-FM: FM, CE, RoHS, DFARS
Warranty
30 months from date of manufacture
SNAP-ODC-HDB and SNAP-ODC-HDB-FM Breakout Racks for High-Density Digital Output Modules
SNAP-ODC-32-SRC, SNAP-ODC-32-SRC-FM,
Used with
SNAP-ODC-32-SNK, and SNAP-ODC-32-SNK-FM
40-pin header; connects to 32-channel sourcing or sinking module using
SNAP-HD-BF6 header cable.
32 signal output connectors; each signal connector has a corresponding common connector.
Connectors
For each zone of 8 signal outputs, 1 connection for either module common or field common.
1 LED for each signal output (32 signal LEDs total)
Indicators
1 power status LED for each zone of 8 signal outputs (4 power LEDs total)
1 A fuses; 1 fuse for each signal output (32 signal fuses total)
Fusing
Replace with Pudenz 1 A automobile mini-fuse or equivalent.
For each zone of 8 signal inputs, 1 jumper controls whether module common or field common
Jumpers
is used.
Voltage
32 VDC maximum, 12-24 VDC nominal
Agency
SNAP-ODC-HDB: UL, CE, RoHS, DFARS
Approvals
SNAP-ODC-HDB-FM: FM, CE, RoHS, DFARS
Warranty
30 months from date of manufacture
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
22
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-IDC-HDB and SNAP-ODC-HDB Breakout Boards (continued)
Dimensional Drawings
X
Z
X
Z
X
Z
X
Z
SNAP-IDC-HDB and SNAP-IDC-HDB-FM breakout racks
Z
X
Z
X
X
Z
X
Z
SNAP-ODC-HDB and SNAP-ODC-HDB-FM breakout racks
For wiring diagrams and jumper settings, see Opto 22 form
1547, the SNAP High-Density Digital Module User’s Guide.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
23
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-AIMA-HDB and SNAP-AIV-HDB Breakout Boards
readings you need. This section applies only with the SNAP-
AIMA-HDB board.
Changing Negative to Positive Values
(SNAP-AIMA-HDB board only) To read positive values, when
you configure points on the module, choose the scalable
option and enter the corresponding positive values, like this:
SNAP-AIMA-HDB breakout board
SNAP-AIMA-HDB, SNAP-AIMA-HDB-FM, SNAP-AIV-HDB,
and SNAP-AIV-HDB-FM breakout boards are primarily
designed for use with SNAP-AIMA-32, SNAP-AIMA-32-FM,
SNAP-AIV-32, and SNAP-AIV-32-FM analog input modules,
respectively. Each of these modules provides 32 input points.
The breakout boards provide easy accessibility for wiring
points to field devices. Use the SNAP-HD-BF6 cable for wiring
connections between the module and the breakout board.
Note for the SNAP-AIMA-32 or SNAP-AIMA-32-FM: if you are
using one of these modules with loop power (2-wire)
devices, connect to the SNAP-AIMA-HDB or SNAP-AIMA-
HDB-FM rack as shown on page 25. If you are using the
SNAP-AIMA-32 (or -FM) with self-powered devices (4-wire),
do not use the SNAP-AIMA-HDB (or -FM) boards, which have
a current limiter. Instead, wire to the SNAP-AIV-HDB or SNAP-
AIV-HDB-FM as shown on page 26 (negative common or
page 27 (positive common).
This may seem odd, but it works. Don’t be confused by the
“Lower” and “Upper” labels for the values. Positive values sent
to the module will be shown as the correct positive values
within your PAC Control strategy.
Scaling Values
Similarly, if you need to scale values for your application,
enter the positive values you need. The module’s range is 4 to
20 mA. If you want 4 to represent 0 mA and 20 to represent
130 mA, for example, enter those values as shown below:
CAUTION: We strongly recommend that you use a breakout
board with the SNAP-AIMA-32 (or -FM) module. Without the
board , miswiring of any point on the module can cause
severe out-of-warranty damage. The breakout board protects
the module from many wiring errors.
Working with Module Values
AIMA modules used with a SNAP-AIV-HDB board read
normally. However, values on AIMA modules used with a
SNAP-AIMA-HDB board are read as negative values. For
example, a value of 10 mA on the module will be read as -10
mA. (Note: If no readings appear, try reversing field
connections on the board.)
Because these readings are negative values, they can be
confusing to work with. This section shows you how to easily
change them to positive values or scale them to the positive
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
24
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-AIMA-HDB Breakout Boards
Wiring diagram: SNAP-AIMA-HDB or SNAP-AIMA-HDB-FM board to
SNAP-AIMA-32 or SNAP-AIMA-32-FM module
This diagram cannot be used with self-sourcing transmitters. Use this diagram only with loop power (2-wire) negative
common devices . For self-powered (4-wire) devices, use a SNAP-AIV-HDB board and wiring diagram on page 26 (negative
common devices) or page 27 (positive common devices).
See “Working with Module Values” on page 24.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
25
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-AIV-HDB Breakout Boards
Wiring diagram: SNAP-AIV-HDB or SNAP-AIV-HDB-FM board to
SNAP-AIV-32 or SNAP-AIV-32-FM module
NOTE: Also use this diagram to wire the SNAP-AIV-HDB breakout rack to a SNAP-AIMA-32 or SNAP-AIMA-32-FM module,
when the module connects to self-powered (4-wire) devices that share a negative common connection. (For positive
common devices, use the diagram on page 27.) See the module’s data sheet for more information.
*
*
* Or 4-wire, 4–20 mA transmitter, if using a SNAP-
AIMA-32 or SNAP-AIMA-32-FM module with this
rack
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
26
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-AIV-HDB Breakout Boards (continued)
Wiring diagram: SNAP-AIV-HDB or SNAP-AIV-HDB-FM board to
SNAP-AIMA-32 or SNAP-AIMA-32-FM module
NOTE: Use this diagram only when when the module connects to self-
powered (4-wire) devices that share a positive common connection. (For
negative common devices, use the diagram on page 26.) See the module’s
data sheet for more information.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
27
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP TEX Cables and Breakout Boards
SNAP-AIMA-HDB and SNAP-AIV-HDB Breakout Boards (continued)
Dimensional Drawing—SNAP-AIMA-HDB and SNAP-AIMA-HDB-FM Breakout Boards
Dimensional Drawing—SNAP-AIV-HDB and SNAP-AIV-HDB-FM Breakout Boards
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
PAGE
28
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
More About Opto 22
SoftPAC, OptoOPCServer, OptoDataLink, options for controller
redundancy or segmented networking, and support for legacy
Opto 22 serial mistic I/O units.
Products
™
Opto 22 develops and manufactures reliable, flexible, easy-to-
use hardware and software products for industrial automation,
energy management, remote monitoring, and data
acquisition applications.
SNAP PAC Brains
While SNAP PAC controllers provide central control and data
distribution, SNAP PAC brains provide distributed intelligence
for I/O processing and communications. Brains offer analog,
digital, and serial functions, including thermocouple
linearization; PID loop control; and optional high-speed digital
counting (up to 20 kHz), quadrature counting, TPO, and pulse
generation and measurement.
OptoEMU Energy Management System
The easy-to-use OptoEMU Sensor monitors electrical energy
use in your facility and delivers detailed, real-time data you
can see, analyze, and use in building and control systems. The
Sensor can monitor energy data from pulsing meters,
electrical panels or subpanels, and equipment. View energy
data online using a software service or incorporate the data
into your control system for complete energy management.
SNAP I/O
I/O provides the local connection to sensors and equipment.
Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per
module, depending on the type of module and your needs.
Analog, digital, and serial modules are all
SNAP PAC System
mixed on the same mounting rack and
controlled by the same processor (SNAP
PAC brain or rack-mounted controller).
Designed to simplify the typically complex
process of selecting and applying an
automation system, the SNAP PAC
System consists of four integrated
components:
Quality
•
•
•
•
SNAP PAC controllers
PAC Project Software Suite
™
Founded in 1974, Opto 22 has established a
worldwide reputation for high-quality
products. All are made in the U.S.A. at our
manufacturing facility in Temecula,
California. Because we test each product
twice before it leaves our factory, rather
than only testing a sample of each batch,
we can guarantee most solid-state relays
and optically isolated I/O modules for life.
SNAP PAC brains
™
SNAP I/O
SNAP PAC Controllers
Programmable automation controllers
(PACs) are multifunctional, modular controllers based on
open standards.
Opto 22 has been manufacturing PACs for over two
decades. The standalone SNAP PAC S-series, the rack-mounted
SNAP PAC R-series, and the software-based SoftPAC™ all
handle a wide range of digital, analog, and serial functions for
data collection, remote monitoring, process control, and
discrete and hybrid manufacturing.
Free Product Support
Opto 22’s California-based Product Support Group offers free,
comprehensive technical support for Opto 22 products. Our
staff of support engineers represents decades of training and
experience. Support is available in English and Spanish by
phone or email, Monday–Friday, 7 a.m. to 5 p.m. PST.
SNAP PACs are based on open Ethernet and Internet Protocol
(IP) standards, so you can build or extend a system easily,
without the expense and limitations of proprietary networks
and protocols. Wired+Wireless™ models are also available.
Additional support is always available on our website: how-to
videos, OptoKnowledgeBase, self-training guide,
troubleshooting and user’s guides, and OptoForums.
PAC Project Software Suite
Opto 22’s PAC Project Software Suite provides full-featured,
cost-effective control programming, HMI (human machine
interface) development and runtime, OPC server, and
database connectivity software for your SNAP PAC System.
In addition, hands-on training is available for free at our
Temecula, California headquarters, and you can register online.
Purchasing Opto 22 Products
Control programming includes both easy-to-learn flowcharts
and optional scripting. Commands are in plain English;
variables and I/O point names are fully descriptive.
Opto 22 products are sold directly and through a worldwide
network of distributors, partners, and system integrators. For
more information, contact Opto 22 headquarters at 800-321-
6786 or 951-695-3000, or visit our website at
www.opto22.com.
PAC Project Basic offers control and HMI tools and is free for
download on our website, www.opto22.com. PAC Project
Professional, available for separate purchase, adds one
www.opto22.com
www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-121210
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
相关型号:
©2020 ICPDF网 联系我们和版权申明