STO-21(T)-250N [ETC]
APPLICATION TOOLING;型号: | STO-21(T)-250N |
厂家: | ETC |
描述: | APPLICATION TOOLING |
文件: | 总8页 (文件大小:232K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
APPLICATIONTOOLING
Crimping tools and machines
The arrow mark indocates the press that is applicable to the applicator.
Crimping tools and machines
Crimping applicator
for end-feeding terminals
Strip-crimp applicator
for side feeding terminals
MK-L
MKS-SC
Crimping applicator
Crimping applicator
Semi-automatic press
Semi-automatic crimping machines (presses)
contact a wire to a chain terminal each time a
footswitch is pressed.
for end-feeding flag terminals
for side-feeding terminals
MKF-L
MKS-L
AP-K2N
Compact crimping applicator
for side-feeding terminals
MKS-LS
• Dimensions:
(W×L×H)280×480×505mm
• Weight:
Approx. 90kg(198lb)
• Power source:
100V AC, Single-phase 50/60Hz
• Pressure output:
14.7kN[1,500kg(3307lb)]
• Dies:
Applicator replacement
1
2
Handtools
Crimping tools
Crimping tools
Hand tools
for loose piece terminals
Hand tools
Extraction and Insertion tools
for chain terminals
for loose piece terminals
Extraction tool
Insertion tool
YRS
series
YC
series
YRM
series
YRF
series
YRK
series
YRK-EX
series
Terminals and parts model
number in alphabetical order
Dimensions:
Dimensions:
(W×L) 70×296mm
Dimensions:
(W×L) 59×224mm
Dimensions:
(W×L) 70×295mm
80×305mm
Dimensions:
(W×L×D)
Dimensions:
(W×L×D)
(W×L) 59×224mm
75×314×25mm
75×314×25mm
Crimping tools
It is the manual tool that is convenience to terminate very small quantity of contacts for prototype or maintenance.
It is composed of two crimping dies for the conductor and insulation, and can be crimp easily.
YRK and YRK-EX can be used for mass-production.
Note: (1) These tools are for prototype tooling or repair.
Extraction tool is used to extract
contacts improperly inserted in the housing.
Insertion tool allows contacts be inserted
in the housing.
This tool greatly increases efficiency especially
when thin wires are used.
(2) YC tool has two crimping sections (A and B). YRS tool has also two crimping sections by inverting upper dies.
Be sure to check applicable wires before use. Since the dies are fixed, the crimping height cannot be adjusted. Therefore, some of the
applicable wires described in this catalog may not be crimped properly.
Before use, check for proper crimping (such as tensile strength, terminal/contact deformation).
(3) These tools are not applicable to 2-wire crimping.
(4) When hand crimping board-in terminals (SAN, SCN, SDN, SGN, SIN, SJN, SZN), care should be taken not to contaminate the solder tails of
the terminals, as with greasy or oily fingers. If a solder problem arises, some cleaning of the tips of the terminal is advisable.
(5) WC and JUC hand tools are provided by J.S.T.(U.K.) LTD. and contact them about the details of these hand tools.
WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
.
YRS series
YRS-370
YC series
–
YRM series
YRF series
YRK YRK-EX series
JK-SP/SS2***
J-SP/SS1***
J-SP/SS2***
LFO-1.0-250N
LFO-2.5-250N
MD-SP12**
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
KEJ-0.7 for plug, KEJ-0.4 for socket
–
–
–
–
–
–
–
YRS-440
YRS-330
YC-440
J-BP/BS1***
DEJ-0.3
DEJ-0.3
–
–
–
–
–
–
–
–
–
–
–
–
JUCS-FO
–
JUCS-FO
–
YRS-470
–
–
MEJ-06
MEJ-06
MD-SP22**
YRS-460
YRS-231
YRM-232
RA-SC1290
–
–
–
–
RA-BC12**
EJ-RA
–
YRM-233
YRM-230
RF-SC22**
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
RF-BC22**
–
–
–
–
–
–
–
–
–
RPJ-SP/SS2331
SAA-21(T)-**
YRS-331
–
–
LAA-21(T-)**
LAA-50(T)-**
LAA-51(T)-**
LAB-51(T)-**
–
EJ-RPJ
–
YC-141
YC-182
YC-142
YC-142
–
–
–
–
–
–
–
–
–
–
–
–
SAA-50(T)-**
–
SAA-51(T)-**
–
–
SAB-51(T)-**
SACH-003G-P0.2
SACH-002GU-P0.3
SAN-002T-0.8A
SAN-002T-0.8K
SBH-001T-P0.5
SBHL-002T-P0.5
SBHM-001T-P0.5
SBHS-002T-P0.5A
SBHS-002T-P0.5A
SBHSM-002T-P0.5
YRS-1190
YRS-858
–
–
–
YRS-220
–
–
–
–
–
–
EJ-PH
–
–
YRS-857
–
YC-670R
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
WC-670
BBH-001T-P0.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YC-670R
BBHM-001T-P0.5
EJ-BHMR
EJ-BHS2
EJ-BHS2
EJ-BHSW
YRS-852
–
–
–
–
–
–
–
YRS-854
YRS-856
YRS-857
YRS-170
SBHT-002T-P0.5
–
–
–
–
–
–
–
–
–
–
–
EJ-BHT
–
–
–
SBN-001T-1.0
SCN-001T-1.0K
YC-170R
YC-191R
–
BBN-001T-1.0
–
–
–
BCN-001T-1.0K
YRS-191
–
WC-191
SCN-001T-P1.0
BCN-001T-P1.0
SCS-41T-2.3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
CSJ-23
EJ-CSN
–
–
–
–
SCSN-41T-P2.3
–
–
SCZH-002T-P0.5
Note: Contact JST for wire range.
YRS-492
3
4
Handtools
Crimping tools
Crimping tools
Hand tools
for loose piece terminals
Hand tools
Extraction and Insertion tools
Terminals and parts model
for chain terminals
for loose piece terminals
number in alphabetical order
YRS series
Extraction tool
Insertion tool
WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
.
YC series
YC-045
YRM series
YRF series
YRK YRK-EX series
SDF-01T-1.0A
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
LDF-01T-1.0A
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
SDF-01T-1.3AS
SDN-21T-P1.5
YC-045
–
LDF-01T-1.3AS
YC-600R
YC-525R
YC-260R
–
BDN-21T-P1.5
SDY-01T-P1.6ASV
SEH-001T-P0.6
SEH-001T-P0.6L
SEH-002T-P0.6L
SEH-003T-P0.6L
SF1F-002(*)-P0.6
SF1M-002(*)-M0.6A
SF1F-21(*)-P0.6
SF1M-21(*)-M0.6A
SF3F-002(*)-P2.0
SF3F-01(*)-P2.0
SF3M-01(*)-M2.0N
SF3F-41(*)-P2.0
SF3M-41(*)-M2.0N
SF3F-71(*)-P2.0
SF3M-71(*)-M2.0N
SFO-41(T)-187N(-8)
SFO-61(T)-250A
SFPS-61T-250
–
BDY-01T-P1.6ASV
SLJ-1.4
EJ-PH
EJ-PH
EJ-PH
EJ-PH
YRS-260
–
WC-260
BEH-001T-P0.6
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YRK-1220
YRK-1220
YRK-1210
YRK-1210
YRK-8821
YRK-8811
YRK-8811
YRK-8801
YRK-8801
YRK-1071
YRK-1071
–
–
EJ-JFAJ1100
EJ-JFAJ1100
EJ-JFAJ1100
EJ-JFAJ1100
EJ-JFAJ3
–
–
–
YRF-882
BF3F-002(*)-P2.0
BF3F-01(*)-P2.0
BF3M-01(*)-M2.0N
LF3F-41(*)-P2.0
LF3M-41(*)-M2.0N
BF3F-71(*)-P2.0
BF3M-71(*)-M2.0N
LFO-41(T)-187N
LFO-61(T)-250A
LFPS-61(T)-250
LFT-61T-250N
LGF-41(T)-4
LGF-51(T)-5
LGF-51(T)-5A
LGM-51T-5
–
YRF-881
EJ-JFAJ3
YRF-881
EJ-JFAJ3
YRF-880
EJ-JFAJ3
YRF-880
EJ-JFAJ3
YRF-1070
EJ-JFAJ3
YRF-1071
EJ-JFAJ3
YC-271
YC-270
YC-272
YC-510
YC-055
–
–
–
–
–
–
–
–
–
–
–
–
SFT-61T-250N
–
SGF-41(T)-4
–
SGF-51(T)-5
–
YC-065
YC-056
–
–
–
–
–
–
SGM-51T-5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
SHCM-A03T-P025
SHF-001T-0.8BS
SHF-002T-0.8BS
SHIF-01T-P0.5
SHIF-21T-P0.5
SHIM-01T-P0.5
SHIM-21T-P0.5
SHR-001T-P0.6
SIM-01(T)-110A
SIM-1.0-250D/N
SIM-2.5-250D/N
SIM-41(T)-110B
SIM-51(T)-250N
SIN-001T-1.2
YRS-960
–
WC-SHCM-A03
YRS-122
YRS-300
YC-122R
WC-122
BHF-001T-0.8BS
–
EJ-SMP
EJ-SMP
EJ-HILP
EJ-HILP
EJ-HILR
EJ-HILR
–
–
–
YC-986R
YC-995R
YC-986R
YC-995R
YC-580R
YC-054
–
–
–
–
–
–
–
–
–
–
–
YRS-580
–
BHR-001T-P0.6
LIM-01(T)-110A
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
JUCS-IM
–
JUCS-IM
–
YC-067
YC-321
–
–
–
–
–
–
–
–
LIM-41(T)-110B
LIM-51(T)-250N
–
YRS-034
YRS-035
–
–
SIN-002T-1.0S
SIN-01T-1.2
–
–
YC-340R
YC-032
YC-032
YC-350
YC-570
YC-571
YC-560
YC-940
LIN-01T-1.2
LIN-01T-1.8
LIN-01T-1.8N
LIN-21T-1.8
SIN-01T-1.8
–
–
–
SIN-01T-1.8N
SIN-21T-1.8
SIN-21T-1.8S
–
–
–
–
–
LIN-21T-1.8S
–
–
SIN-61T-2.6S
–
–
–
–
–
–
–
–
–
–
LIN-61T-2.6S
LIN-81T-3.6S
–
–
–
–
SIN-81T-3.6S
Note: Contact JST for wire range.
5
6
Handtools
Crimping tools
Crimping tools
Hand tools
for loose piece terminals
Hand tools
Extraction and Insertion tools
Terminals and parts model
for chain terminals
for loose piece terminals
number in alphabetical order
YRS series
Extraction tool
Insertion tool
WC & JUC series
JUK's Hand Tools
Terminal in loose form
model No.
.
YC series
YRM series
YRF series
YRK YRK-EX series
SJ2F-002GF-P1.0
SJ2M-002GF-M1.0N
SJ2F-01GF-P1.0
SJ2M-01GF-M1.0N
SJ2M-01GF-M1.0S
SJ2F-21GF-P1.0
SJ2M-21GF-M1.0N
SJ4F-71GF-M3.0
SJ4F-81GF-M3.0
SJ5F-71GF-M6.5
SJ5M-71GF-M6.5
SJ5F-81GF-M6.5
SJ5M-81GF-M6.5
SJ5F-91GF-M6.5
SJ5M-91GF-M6.5
SJN-001PT-0.9
SJN-002PT-0.9
SLC-21T-2.0
YRS-8851
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YRK-8851
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
EJ-JFAJ2N
EJ-JFAJ2N
EJ-JFAJ2N
EJ-JFAJ2N
EJ-JFAJ2N
EJ-JFAJ2N
EJ-JFAJ2N
EJ-JFAJ4
EJ-JFAJ4
EJ-JFAJ5
EJ-JFAJ5
EJ-JFAJ5
EJ-JFAJ5
EJ-JFAJ5
EJ-JFAJ5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YRS-8851
YRK-8851
–
YRS-8861
YRK-8861
–
–
YRS-8861
YRK-8861
YRS-8861
YRK-8861
–
–
YRF-1120
YRK-1120
LJ2F-21GF-P1.0
LJ2M-21GF-M1.0N
BJ4F-71GF-M3.0
BJ4F-81GF-M3.0
LJ5F-71GF-M6.5
LJ5M-71GF-M6.5
LJ5F-81GF-M6.5
LJ5M-81GF-M6.5
LJ5F-91GF-M6.5
LJ5M-91GF-M6.5
–
–
YRF-1120
YRK-1120
–
YRF-1130
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YRF-1370
–
YRF-888
–
YRF-888
–
YRF-889
–
YRF-889
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YRS-1181
–
–
YRS-036
–
–
YC-310
WC-310
LLC-21T-2.0
–
EJ-LC
SLC-22T-2.0
–
–
–
–
–
–
–
EJ-LC
SLC-001T-P2.0
SLC-02T-P2.0
–
–
EJ-LCL
EJ-LCL
LEJ-13
LEJ-13
–
–
SLF/M-01T-P1.3E
SLF/M-41T-P1.3E
SMF-01T-1.0
–
YC-202
YC-203
YC-081
YC-082
YRM-201
WC-202
WC-203
LLF/M-01T-P1.3E
LLF/M-41T-P1.3E
LMF-01T-1.0
LMF-01T-1.3
–
LIT-2013
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
SMF-01T-1.3
–
SMM-003T-P0.5
SMR-001T-0.6
YRS-800
–
WC-800
WC-066
YRS-580
YC-580R
YC-680
YC-066
–
–
BMR-001T-0.6
LOM-21(T)-187
LOM-51(T)-250
–
SOM-21(T)-187
SOM-51(T)-250
SOTZP-002GD-P0.18
–
–
–
–
–
–
–
–
EJ-OTZS
EJ-PH
YC-610R
YC-611R
YC-610R
YC-611R
SPA-001T-P0.5
SPAL-001T-P0.5
–
–
–
–
–
–
–
–
BPA-001T-P0.5
BPAL-001T-P0.5
–
–
–
–
EJ-PAL
EJ-PAL
SPAL-002T-P0.5
SPB-1.0-250N-S
SPB-2.5-250N-S
SPF-01T-2.5C
YRS-1340
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
JUCS-PB
JUCS-PB
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YC-043R
–
–
–
LPF-01T-2.5C
SPH-001T-P0.5L
SPH-002T-P0.5L
SPH-002T-P0.5S
SPH-004T-P0.5S
YRS-245
YRS-241
YRS-240
YRS-243
–
–
–
–
–
–
BPH-002T-P0.5S
–
EJ-PH
EJ-PH
EJ-PH
YRM-240
WC-240
–
–
–
–
YC-610R
YC-611R
SPHD-001T-P0.5
–
–
–
WC-610
WC-620
BPHD-001T-P0.5
EJ-PHD-RB
EJ-PHD-RB
–
SPHD-002T-P0.5
SPLI-002T-P0.5
YRS-620
–
YRM-620
–
–
–
–
BPHD-002T-P0.5
–
–
–
–
YRS-1410
YRS-1091
YRS-1090
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
SPND-001T-C0.5
EJ-PND
EJ-PND
SPND-002T-C0.5
Note: Contact JST for wire range.
7
8
Handtools
Crimping tools
Crimping tools
Hand tools
for loose piece terminals
Hand tools
Extraction and Insertion tools
Terminals and parts model
for chain terminals
for loose piece terminals
number in alphabetical order
YRS series
Extraction tool
–
Insertion tool
WC & JUC series
JUK's Hand Tools
WC-740
Terminal in loose form
model No.
.
YC series
YC-740
YRM series
YRF series
YRK YRK-EX series
SPS-01T-110
–
–
–
–
–
–
–
–
LPS-01T-110
–
–
YC-730
YC-731
YC-760
YC-780
YC-780
YC-750
YC-751
YC-710
YC-711
YC-770
YC-771
YC-720
YC-721
SPS-01T-187(-8)
WC-730
LPS-01T-187(-8)
EJ-PS187
SPS-21T-205(-5)
SPS-21T-250
–
–
–
–
–
–
–
–
–
–
–
–
–
LPS-21T-205(-5)
LPS-21T-250
–
–
–
–
–
WC-780
WC-780
EJ-PS250
EJ-PS250
SPS-21T-250S
LPS-21T-250S
SPS-41T-110
SPS-51T-187(-8)
SPS-51T-205
–
–
–
–
–
–
–
–
–
–
–
–
WC-750
WC-710
LPS-41T-110
LPS-51T-187(-8)
LPS-51T-205
–
–
–
EJ-PS187
–
–
SPS-61T-250
SPS-61T-250S
SPS-91T-250
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
WC-720
LPS-61T-250
EJ-PS250
EJ-PS250
EJ-PS250
EJ-PS250
EJ-PUD
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
LPS-61T-250S
–
–
–
–
–
–
YRF-790
YRF-791
BPS-91T-250
SPS-91T-250S
SPUD-001T-P0.5
SPUD-002T-P0.5
SPXA-001T-P0.6
SRA-20(T)-**
–
BPS-91T-250S
YRS-1320
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
EJ-PUD
–
–
EJ-PXA
–
YC-181
YC-141
YC-182
YC-142
LRA-20(T)-**
–
–
–
–
–
–
–
–
–
–
–
–
–
–
SRA-21(T)-**
–
LRA-21(T)-**
SRA-50(T)-**
–
LRA-50(T)-**
SRA-51(T)-**
–
LRA-51(T)-**
SRB-1.0-( )
–
–
–
JUCS-RB/RT
–
SRB-2.5-( )
–
JUCS-RB/RT
–
SRB-51(T)-**
–
YC-142
YC-033
YC-183
YC-142
YC-142
–
LRB-51(T)-**
SRC-01(T)-**
–
–
LRC-01(T)-**
SRC-50(T)-**
–
–
LRC-50(T)-**
SRC-51(T)-**
–
–
LRC-51(T)-**
SRF-51(T)-**
–
–
LRF-51(T)-**
SRT-1.0-( )
–
–
–
JUCS-RB/RT
–
SRT-2.5-( )
–
JUCS-RB/RT
–
SRT-51T-**
–
YC-143R
–
LRT-51T-**
SRWF-01GG-M0.6
SRWM-01GG-S0.6
SRWF-21GG-M0.6
SRWM-21GG-S0.6
SRWF-61GG-M0.6
SRWM-61GG-S0.6
SSFH-001T-P0.5
SSFH-002T-P0.5
SSH-003T-P0.2-H
SSH-003GA-P0.2
SSHL-002T-P0.2
SSHL-003T-P0.2
SSHL-003GA1-P0.2
SSF/M-01T-P1.4
SSF/M-21T-P1.4
STI-01(T)-110N
Note: Contact JST for wire range.
–
–
–
–
EJ-RPZ
EJ-RPZ
EJ-RPZ
EJ-RPZ
EJ-RPZ
EJ-RPZ
EJ-SFH
EJ-SFH
–
–
–
–
–
–
–
–
–
–
–
–
–
YC-840R
YC-840R
–
BRWF-61GG-M0.6
–
–
BRWM-61GG-S0.6
–
–
–
–
–
–
YRS-859
YRS-859
YRS-1140
YRS-859
YRS-859
–
–
–
–
–
–
–
–
WC-SH2832
WC-SH2832
WC-GH2630
WC-SH2832
WC-SH2832
–
–
–
–
–
–
–
–
–
–
–
YC-500
YC-550
YC-041
BSF/M-01T-P1.4
BSF/M-21T-P1.4
LTI-01(T)-110N
SLJ-1.4
SLJ-1.4
ITBL-08V
–
WC-550
–
–
–
–
–
9
10
Handtools
Crimping tools
Crimping tools
Hand tools
for loose piece terminals
Hand tools
Extraction and Insertion tools
Terminals and parts model
for chain terminals
for loose piece terminals
number in alphabetical order
YRS series
Extraction tool
Insertion tool
WC & JUC series
JUK's Hand Tools
JUCS-TI
JUCS-TI
Terminal in loose form
model No.
.
YC series
YRM series
YRF series
YRK YRK-EX series
STI-1.0-250D/N
STI-2.5-250D/N
STI-41(T)-110N
STI-51(T)-250N
STO-01(T)-110N(-8)
STO-01(T)-187N(-8)
STO-0.25-110N
STO-0.5-110N
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YC-063
–
–
–
–
–
LTI-41(T)-110N
LTI-51(T)-250N
LTO-01(T)-110N(-8)
LTO-01(T)-187N(-8)
–
–
YC-322
YC-041
YC-042
YC-810
YC-820
–
–
–
–
JUCS-05110
–
STO-1.0-110N
–
–
–
–
–
JUCS-2.8/4.8
–
STO-1.0-187N
–
JUCS-2.8/4.8
–
STO-1.0-250N
–
JUCS-6.3
–
STO-2.5-250N
–
JUCS-6.3
–
STO-21(T)-205N
STO-21(T)-250N
STO-41(T)-110N(-8)
STO-41(T)-187N(-8)
STO-41T-187S
STO-61(T)-250N
STO-81(T)-250N
STS/D-002GG-P0.6
SVA-41T-P1.1
–
YC-053
YC-102
YC-062
YC-051
YC-064
YC-047
YC-280
–
LTO-21(T)-205N
LTO-21(T)-250N
LTO-41(T)-110N(-8)
LTO-41(T)-187N(-8)
LTO-41T-187S
LTO-61(T)-250N
LTO-81(T)-250N
–
–
–
–
–
–
–
–
–
EJ-187S
EJ-TSD
–
–
–
–
–
YRF-280
–
YRS-1360
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YC-450
YC-044
YC-151
YC-152
YC-592
YC-593
YC-590
–
BVA-41T-P1.1
LVF-01T-1.5A
LVF-01T-1.5N
LVF-01T-2.36N
BVF-42T-P2.0
BVM-42T-P2.0
BVF/M-61T-P2.0
BVF/M-81T-P2.0
–
–
SVF-01T-1.5A
–
–
SVF-01T-1.5N
EJ-SV
EJ-LV
SVF-01T-2.36N
SVF-42T-P2.0
–
WC-592
WC-592
WC-590
WC-591
VLJ-20
VLJ-20
VLJ-20
VLJ-20
SVM-42T-P2.0
SVF/M-61T-P2.0
SVF/M-81T-P2.0
YRF-590
YRF-591
–
YC-160R
YC-161R
YC-164R
YC-930R
YC-931R
YC-630
YRM-160
SVH-21T-P1.1
–
–
–
–
WC-160
WC-930
BVH-21T-(P)1.1
EJ-NV
–
YRM-164
SVH-41T-P1.1
–
–
–
–
BVH-41T-P1.1
EJ-NV
–
SVT-41T-P1.1
SVU-21T-P0.6
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
BVT-41T-P1.1
EJ-VT
–
–
–
–
–
–
–
–
–
–
–
–
YC-990R
–
BVU-21T-P0.6
EJ-VU4
SVYF-61T-P0.5A
SWPJT-21T-P0.5
SWPJT-21T-P0.5A
SWPJR-21T-M0.5
SWPKP-21T-0.6
SWPKR-21T-0.6
SWPR-001T-P025
SWPT-001T-P025
SXA-01T-P0.6
–
–
YRF-536
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
EJ-WPJ
EJ-WPJ
EJ-WPJ
–
–
–
–
–
–
–
–
YRF-1051
–
–
BWPKP-21T-0.6
–
–
–
YRF-1050
BWPKR-21T-0.6
YRS-980
YRS-980
YRS-701
YRS-692
YRS-691
–
–
–
–
–
WC-JWPF
WC-JWPF
WC-700M
–
–
EJ-JWPF
EJ-JWPF
–
BXA-01T-P0.6
BXA-001T-P0.6
–
YC-701R
YC-692R
EJ-XAG,EJ-XMP
EJ-XMP, EJ-XMR
SXA-001T-P0.6
IT-XA
SXA-001T-P0.6L
Note: Contact JST for wire range.
–
WC-691
–
–
11
12
Handtools
Crimping tools
Crimping tools
Hand tools
for loose piece terminals
Hand tools
Extraction and Insertion tools
Terminals and parts model
for chain terminals
for loose piece terminals
number in alphabetical order
YRS series
Extraction tool
Insertion tool
WC & JUC series
JUK's Hand Tools
WC-700M
Terminal in loose form
model No.
.
YC series
YC-701R
YRM series
YRF series
YRK YRK-EX series
SXAM-01T-P0.6
SXAM-001T-P0.6
SXF-01T-P0.7
SXF-41T-P0.7
YRS-701
YRS-692
–
–
–
–
–
–
–
–
–
–
–
–
BXAM-01T-P0.6
BXAM-001T-P0.6
BXF-01T-(P)0.7
BXF-41T-(P)0.7
EJ-XAW
EJ-XAW
LEJ-7
–
–
–
–
YC-692R
YC-251
–
–
–
–
–
YC-252
LEJ-7
YRS-110
YC-110R
YC-111R
SXH-001T-P0.6
–
–
–
WC-110
BXH-001T-P0.6
XJ-06
–
SXH-001T-P0.6N
SXH-002T-P0.6
SXM-01T-P0.6
SXM-001T-P0.6
SXNI-001T-P0.6
SXNI-003T-P0.6
SYF-001T-P0.6
SYF/M-01T-P0.5A
SYF/M-41T-P0.5A
SYF-61T-P0.5A
SYM-001T-P0.6
SYM-01T-P0.7
SYM-41T-P0.7
SZE-002T-P0.3
SZE-003T-P0.3
SZF/M-01T-P0.7
SZF/M-41T-P0.7
SZH-002T-P0.5
SZH-003T-P0.5
SZN-002T-P0.7K
SZN-003T-P0.7K
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
XJ-06
XJ-06
–
–
–
YRS-480
–
–
–
YRS-701
YRS-692
YRS-1380
YRS-1390
YRS-125
–
YC-701R
–
BXM-01T-P0.6
EJ-XAG,EJ-XMP
EJ-XMP, EJ-XMR
YC-692R
–
BXM-001T-P0.6
IT-XA
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
YC-520
YC-530
–
WC-520
WC-530
BYF/M-01T-P0.5A
YLJ-0.5
YLJ-0.5
–
–
BYF/M-41T-P0.5A
–
–
YRF-536
–
–
–
YRS-121
–
YC-121R
YC-251
YC-252
–
–
–
–
–
–
–
–
–
–
–
–
WC-121
BYM-001T-P0.6
SMJ-06
LEJ-7
–
–
–
–
–
–
BYM-01T-(P)0.7
–
BYM-41T-(P)0.7
LEJ-7
YRS-1300
YRS-1330
–
–
–
–
–
–
–
YC-390R
YC-380R
BZF/M-01T-(P)0.7
ZLJ-07S
ZLJ-07S
–
BZF/M-41T-(P)0.7
YRS-491
YRS-490
YRS-541
YRS-540
YRS-1460
–
WC-491
WC-490
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
SZPD-002T-P0.3
Note: Contact JST for wire range.
13
14
Crimping tools
Crimping tools
Dies replacement type hand crimping tools
YRK series hand crimping tools suitable for mass-production
YRK-EX
• Crimping work, such as setting contacts to hand tools etc., is facilitated by using a strip contact to improve the productivity.
• A light operation enables to terminate the contact correctly, by adopting straight-ahead crimping.
• A structure, that the carrier of contact doesn't fly off, has been adopted to this tool.
• High reliability of crimping is provided by choosing the crimper and anvil suitable for the wire specification.
• The crimping die can be easily exchanged by only insertion and extraction of pin.
• Common handle and crimping dies can be stored in One case and it is easy to carry.
Patent pending
Hand Crimping Tools
YRK Standard type
• When exchanging the crimper, the crimping suitable for
the wire specification can be conducted.
• Anvil is fixed to tool.
(
)
(
)
( )
Dimensions: 75 W ×314 L ×25 D mm
(
)
(
)
( )
Dimensions: 75 W ×314 L ×25 D mm
(
)
(
)
( )
(
)
Dimensions: 376 W ×295 L ×73 D mm
Weight: Approx. 800g When assembling dies
(
)
Weight: Approx. 800g When assembling dies
Contact and Applicable dies
Contact and Applicable dies
*1
Contact Model No.
Crimper
*1
Contact Model No.
Applicable wire size
Applicable wire size
Crimper
Series
Nominal
Anvil
J1LL
Color mark
Yellow green
Common parts
Hand crimp
tools
Model No. of
crimper
Series
Nominal
Receptacle
Tab
Insulation O.D.
Model No.
Receptacle
Tab
Marking
LA
AWG
#22
KV0.75
#20
#18
#28
#24
#24
#20
#22
#20
#28
#24
#26
#24
#24
#20
#22
#20
#20
#16
#18
#18
#16
#14
Insulation O.D. (mm)
1.58
Die mark
AWG
#20
#18
#22
KV0.75
#28
#24
#24
#20
#22
#20
#28
#24
#26
#24
#24
#20
#22
#20
#20
#16
#18
#18
#16
#14
(mm)
A
B
C
D
A
B
A
B
A
B
A
B
C
D
A
B
C
D
A
B
C
D
A
B
1.76
2.03
1.58
1.90
1.20
1.43
1.43
LA / LB
LC / LD
SA / SB
MA / MB
LA / LB
SA / SB
SC / SD
MA / MB
MC / MD
LA / LB
LC / LD
2LA / 2LB
J1LA / B
LB
1.90
J1000
Type II
( )
*
( )
* -M0.6A
L
SF1F-21
-P0.6
SF1M-21
YRK-1210
J1000
Type II
L
SF1F-21(*)-P0.6
SF1M-21(*)-M0.6A
LC
1.76
J1LC / D
J2SA / B
J2MA / B
J2LA / B
J3SA / B
J3SC / D
J3MA / B
J3MC / D
J3LA / B
J3LC / D
J32LA / B
LD
2.03
SA
1.20
SJ2F-002GF-P1.0
SJ2M-002GF-M1.0N
YRK-8851
YRK-8861
YRK-1120
S
M
L
SJ2F-002GF-P1.0 SJ2M-002GF-M1.0N
S
M
L
J2SL
J2ML
J2LL
White
Purple
Orange
SB
1.43
MA
MB
LA
1.43
SJ2F-01GF-P1.0
SJ2F-21GF-P1.0
SJ2M-01GF-M1.0N
SJ2M-21GF-M1.0N
J2000
SJ2F-01GF-P1.0
SJ2F-21GF-P1.0
SJ2M-01GF-M1.0N
SJ2M-21GF-M1.0N
J2000
*2
1.53
*2
1.53
1.58
1.76
1.20
1.43
1.30
1.11
1.43
1.76
1.58
2.56
1.76
2.35
2.03
2.83
3.10
3.30
1.58
1.76
1.20
1.43
1.30
1.11
1.43
1.76
1.58
2.56
1.76
2.35
2.03
2.83
3.10
3.30
LB
SA
Handle unit
Upper pin
Lower pin
Case
SB
( )
S
SF3F-002
SF3F-01
*
-P2.0
-P2.0
—
YRK-8821
YRK-8811
( )
S
SF3F-002
SF3F-01
*
-P2.0
-P2.0
—
J3SL
J3ML
Yellow
Green
SC
SD
MA
MB
MC
MD
LA
( )
*
( )
*
M
SF3M-01
-M2.0N
( )
*
( )
* -M2.0N
M
SF3M-01
J300
J300
LB
( )
*
( )
*
YRK-8801
YRK-1071
L
SF3F-41
SF3F-71
-P2.0
-P2.0
SF3M-41
SF3M-71
-M2.0N
-M2.0N
( )
( )
*
L
SF3F-41
SF3F-71
*
-P2.0
-P2.0
SF3M-41
SF3M-71
-M2.0N
-M2.0N
J3LL
Red
Blue
LC
LD
2LA
2LB
( )
*
( )
*
2L
( )
*
( )
*
2L
J32LL
Note: 1. J1000 Finish(*): T ...... Tin-plated
GC ...Gold-plated
*1... Crimper is either the pair of
A and B or the pair of C and D.
*2... When using wire type UL 2517.
Note: 1. J1000 Finish(*): T ...... Tin-plated
GC ...Gold-plated
*1... Crimper is either the pair of
A and B or the pair of C and D.
*2... When using wire type UL 2517.
2. J300 Finish(*): GF… Nickel-undercoated, 0.38μm selective gold-plated
GI… Nickel-undercoated, 0.76μm selective gold-plated
T ...... Tin-plated
3. The wear of parts is caused by using hand tool repeatedly.
Measure the crimping height daily and conduct periodical inspection of the wearing parts,
such as ratchet, pin and so on.
2. J300 Finish(*): GF… Nickel-undercoated, 0.38μm selective gold-plated
GI… Nickel-undercoated, 0.76μm selective gold-plated
T ...... Tin-plated
3. The wear of parts is caused by using hand tool repeatedly.
Measure the crimping height daily and conduct periodical inspection of the wearing parts,
such as ratchet, pin and so on.
15
16
相关型号:
STO-21-205N
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-21-205N-5
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-21-250N
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-21T-205N
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-21T-205N-5
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-21T-250N
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-41(T)-110N(-8)
Crimping tools and machinesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-41(T)-187N(-8)
Crimping tools and machinesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-41-110N
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-41-110N-8
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-41-187N
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STO-41-187N-8
TERMINALWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
©2020 ICPDF网 联系我们和版权申明