T9AP5D2-20 [ETC]
Low Cost 30 Amp PC Board or Panel Mount Relay; 低价30安培PC板或面板安装继电器型号: | T9AP5D2-20 |
厂家: | ETC |
描述: | Low Cost 30 Amp PC Board or Panel Mount Relay |
文件: | 总3页 (文件大小:96K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T9A series
Low Cost
30 Am p PC Board or
Panel Mount Relay
File E22575
File LR15734
Features
Initial Dielectric Strength
• Up to 30 amp switching in SPST and 20 amp in SPDT arrangements.
• Immersion cleanable , plastic sealed case available.
Betw een Open Contacts: 1,500V rms.
Betw een Contacts and Coil: 2,500V rms.
(6)
• Meets UL 873 and UL 508 spacing – 1/8" through air, 1/4" over surface.
• Load connections made via 1/4" Q. C. terminals and safety wells accept
insulated female Q. C. terminals (mounting codes 2 & 5).
6 kV surge using 1.2µs/50µs Impulse Wave or
.5µs – 100kHz Ring Wave
• UL Class F insulation system standard.
• Well suited for various industrial, commercial and residential applications.
Initial Insulation Resistance
Betw een Mutually Insulated Elem ents: 109 ohms, min., @ 500VDC,
25°C and 50% R.H.
Contact Ratings @ 25°C w ith relay properly vented.
Rem ove vent nib after soldering and cleaning.
Arrangem ents: 1 Form A (SPST-NO), and 1 Form C (SPDT).
Material: Silver-cadmium oxide.
Mechanical Life: 10 million operations, typical.
Minim um Contact Load: 1A @ 5VDC or 12VAC.
Initial Contact Resistance: 75 milliohms, max., @ min. rated current (switched).
Coil Data @ 25°C
Voltage: 5 to 110VDC.
Nom inal Coil Pow er: 1.0W, (approx.) and 900mW (approx.) versions.
Maxim um Coil Pow er: 2.8 Watt.
Maxim um Coil Tem perature : Class F: 140°C.
Typical Electrical Load & Life - 1 Watt Coil
(5)
Contact
Contact Load
Type of Load
Operations
Duty Cycle: Continuous.
Arrangem ent
1
5
30A @ 240VAC
25A @ 240VAC
UL General Purpose
Resistive Heater
100,000
100,000
Coil Data - 1 Watt
Nom inal DC Resistance
20A/10A @ 240VAC
20A/10A @ 240VAC
20A/10A @ 28VDC
UL General Purpose
UL Resistive
100,000
100,000
100,000
Nom inal
Nom inal DC Resistance
Nom inal
Voltage
±
10% (Ohm s) Current (m A) Voltage
±
10% (Ohm s) Current (m A)
Resistive
5
6
25
36
200
167
111
83
18
22
324
484
56
45
42
21
9
9
81
24
576
12
15
144
225
48
110
2,304
12,100
Typical Electrical Load & Life - 900m W Coil
67
Contact
Contact Load
Type of Load
Operations
Arrangem ent
1
120VAC
120VAC
50 LRA/16 FLA
30 LRA/11 FLA
100,000
200,000
Coil Data - 900m W
Nom inal DC Resistance
Nom inal
Nom inal DC Resistance
Nom inal
Voltage
±
10% (Ohm s) Current (m A) Voltage
±
10% (Ohm s) Current (m A)
5
6
9
12
15
18
20
27
40
97
155
256
380
450
185
150
93
77
59
22
24
28
36
48
545
660
890
1,450
2,560
13,450
40
36
31
25
19
8
UL 508/873 & CSA Contact Ratings - 1 Watt Coil
Voltage
Load Type
N.O. Contact
N.C. Contact
277VAC
277VAC
Tungsten *
Ballast
5.4A
10A
–
3A
47
44
110
240VAC
Motor
2 HP
1/2 HP
20A
15A
30A/12A
275VA
1/4 HP
–
240VAC
Resistive *
General Purpose†
LRA/FLA **††
Pilot Duty *
Motor
30A
240VAC
30A
240VAC
80A/30A
470VA
1 HP
240VAC
125VAC
Operate Data @ 25°C
120VAC
LRA/FLA
98A/22A
8.3A
Must Operate Voltage: 75% of nominal voltage or less.
Must Release Voltage: 10% of nominal voltage or more.
Operate Tim e (Including Bounce)§: 15 ms, max.
Release Tim e (Including Bounce)§: 15 ms, max.
§ At or From Nominal Coil Voltage
120VAC
Tungsten *
Pilot Duty
Resistive
–
120VAC
470VA
20A
–
28VDC
10A
*
Rated 6,000 operations.
** Higher UL & CSA ratings available.
For Form C application, derate current to 20A (N.O.), 10A (N.C.).
†† For Form C application, derate current to 67% .
†
Note: Consult factory for other 900mW version contact ratings.
60
Am bient Tem perature vs. Coil Voltage - 1 Watt Coil
Environm ental Data
Data below are average values and should be verified in application. Tests
were conducted within a 2' (.6 m) cube (still air); at nominal coil power @
25°C; with normally open contact loaded; and with 4' (1.22 m) long, #10
Storage Tem perature Range: -55°C to 130°C.
Operating Tem perature Range : -55°C to +85°C.
Vibration, Operational: 0.065" (1.65mm) max. excursions from 10-55 Hz.
(1)
AWG load wires. P.C. board relays were mounted to a 30A, single side P.C.
with no contact opening >100µs.
Shock, Operational: 10g for 11 ms with no contact opening >100µs.
Shock, Mechanical: 100g.
(6)
board
.
140
120
100
80
60
40
20
0
0A
Mechanical Data
Term ination: Printed circuit and quick connect terminals
Enclosures (all have 94V-0 flam m ability rating):
10A
20A
(4)
.
(note 3)
Sealed Relay, Vented
;
30A
T9AP: Unsealed, plastic dust cover.
T9AS: Immersion cleanable, sealed plastic case
T9AV: Vented, flux-tight, plastic cover.
Load Connections Via Q.C. Term inals,
PC Mount
(2 & 3)
.
60
80
100
120
140
160
180
Weight: Q.C. version: 1.2 oz. (33g) approx. (mounting code 2 & 5).
Sealed Model T9AS: 0.9 oz. (26g) approx. (mounting code 1).
Applied Continuous Coil Voltage (% of Rated Voltage)
140
120
100
80
0A
10A
20A
60
Relay With Dust Cover,
Flange Mount
30A
Notes
40
60
(1) Operating ambient temperature must consider “Must Operate Voltage
Change Over Temperature,” Contact Temperature Rise, Coil Temperature
Rise (If coil is not allowed to cool) and Maximum Coil Temperature.
Specification ambient considers 20A load with coil cooled to ambient.
(2) Sealed relay terminals should not be bent.
(3) Remove knock-off nib after cleaning process for optimum life of sealed
relays.
(4) Maximum soldering temperature is 500°F for 4 seconds.
(5) Class F coils are UL systems approved for maximum coil temperature of
140°C, by change of resistance method.
80
100
120
140
160
180
Applied Continuous Coil Voltage (% of Rated Voltage)
140
120
100
80
60
0A
(6) See application note 13C265 for proper relay mounting, termination,
cleaning and PC board conductor width. Coil rise test performed with 30A
PC board to maintain 20°C maximum rise @ 30A.
10A
40
20A
(note 3)
20 Sealed Relay, Vented
PC Term inals For Coil & Contacts
30A
0
60
80
100
120
140
160
180
Applied Continuous Coil Voltage (% of Rated Voltage)
Ordering Inform ation
Typical Part Num ber B T9A
S
5
D
2
2
-12
1. Basic Series:
T9A = Low cost, printed circuit board/panel power relay.
2. Enclosure:
P = Unsealed, plastic dust cover (mounting code 5).
S = Immersion cleanable, knock off nib, sealed plastic case (mounting codes 1 & 2).
V = Vented, flux-tight (mounting code 1).
3. Contact Arrangem ent:
1 = 1 Form A (SPST-NO).
5 = 1 Form C (SPDT).
4. Coil Input:
D = DC voltage (1 Watt)
L = DC voltage (900mW)
5. Mounting & Term ination:
(a)
1 = Printed circuit board mounting; PC terminals for coil & contacts
.
(b)
2 = Printed circuit board mounting; PC terminals for coil & contacts, and .250" (6.35mm) quick connects for contacts
.
(c)
5 = Flanged mounting; .187" (4.75mm) quick connects for coil and .250" (6.35mm) quick connects for contacts
.
6. Contact Material:
2 = Silver-cadmium oxide.
7. Coil Voltage:
5 = 5VDC
6 = 6VDC
9 = 9VDC
12 = 12VDC
15 = 15VDC
18 = 18VDC
20 = 20VDC
22 = 22VDC
24 = 24VDC
36 = 36VDC
48 = 48VDC
110 = 110VDC
a) Only available with enclosure code “S” & “V”.
b) Only available with enclosure code “S”.
c) Only available with enclosure code “P”.
Stock Item s – The follow ing item s are norm ally m aintained in stock for im m ediate delivery.
T9AS1D12-110
T9AS1D12-12
T9AS1D12-18
T9AS1D12-24
T9AS1D12-48
T9AS1D12-5
T9AS1D22-110
T9AS1D22-12
T9AS1D22-24
T9AS1D22-48
T9AS1D22-5
T9AS1L12-12
T9AS1L12-24
T9AS5D12-110
T9AS5D12-12
T9AS5D12-18
T9AS5D12-24
T9AS5D12-48
T9AS5D12-5
T9AS5D22-110
T9AS5D22-12
T9AS5D22-24
T9AS5D22-48
T9AS5D22-5
T9AS5L12-12
T9AS5L12-24
T9AP1D52-12
T9AP1D52-24
T9AP1D52-48
T9AP5D52-12
T9AP5D52-24
T9AP5D52-48
61
Outline Dim ensions
T9AS – Mounting & Term ination Code 2
T9AP – Mounting & Term ination Code 5
.187 x .020
(4.75 x .508)
QUICK
1.080 MAX.
(27.43)
1.100 MAX.
(27.94)
CONNECT
.250 x .032 QUICK
.130 ± .020
(6.35 x .81) CONNECT
(3.30 ± .51)
.250 x .032
(6.35 x .81)
QUICK
.03
Ø
(.80)
1.980 MAX.
(50.29)
CONNECT
2 PLACES
.045 x .045
(1.14 x 1.14)
1.713 ± .010
(43.51 ± .25)
1.280 MAX.
(32.51)
1.280 MAX.
(32.51)
.032 x .062
(.81 x 1.57)
1.100 MAX.
(27.94)
1.080 MAX.
(27.43)
.071 (1.80) RAD. FOR #6 SCREW
Note: Recommended mounting screw torque is 4.0-5.0 lbs.in when #6 screw is used.
T9AS/V – Mounting & Term ination Code 1
.805 MAX.
(20.4)
.212 MAX.
(5.38)
.130 + .016
.032 x .062
(.8 x 1.6)
TERMINALS
– .010
3.30 + .41
(
)
–.25
.10 MAX.
(2.54)
.50
(12.8)
.69
(17.6)
1.280 MAX.
(32.51)
.045 x .045
(1.14 x 1.14)
TERMINAL
.03
Ø
(.80)
.016
(.43)
1.08 MAX.
(27.43)
TERMINALS
Wiring Diagram s (Bottom View s)
PC Board Layouts (Bottom View s)
T9AP/S – Mounting & Term ination Code 2
.140 MAX.
1 Form A
1 Form C
.250 MAX.
(3.56)
(6.35)
.081 ± .005 DIA.
(2.06 ± .13)
.100
(2.54)
.300
(7.62)
.600
(15.24)
.043 ± .003 DIA.
(1.09 ± .08)
.500
(12.7)
.150
(3.81)
.550
(13.97)
.700
DIN Mount Adapter - 9T91A001
(17.78)
T9AS/V – Mounting & Term ination Code 1
3 Holes for #6-32 Screw
0.011 Deep
(.27)
.212 MAX.
(5.38)
.50
(12.7)
.20
(5.08)
.100
(2.54)
.081 ± .005 DIA.
(2.06 ± .13)
.300
(7.62)
.50
(12.7)
.40
(10.16)
1.67
(42.41)
.600
(15.24)
.043 ± .003 DIA.
(1.09 ± .08)
.500
(12.7)
.79
(20.06)
.150
(3.81)
.550
(13.97)
.700
(17.78)
Note: Fits 35mm din track
Includes: 2 Din clips
2 Screws
Must be ordered in multiples of 50
62
相关型号:
©2020 ICPDF网 联系我们和版权申明