TM101JVHG32-00 [ETC]
Preliminary Specification;
| 型号： | TM101JVHG32-00 |
| 厂家： | 
ETC |
| 描述： | Preliminary Specification |
| 文件： | 总22页 (文件大小：936K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
MODEL NO :
TM101JVHG32
MODEL VERSION:
SPEC VERSION :
ISSUED DATE:
00
V1.2
2016-09-22
■Preliminary Specification
□Final Product Specification
Customer :_____________
Approved by
Notes
TIANMA Confirmed :
Prepared by
Checked by
Zhou Sen
Approved by
Liu Bin
Fan Yong
Zhuang Zhenliang
Wan Cheng
Tan Feng
Chen Paijie
This technical specification is subjected to change without notice
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 1 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
Table of Contents
Table of Contents............................................................................................................................2
Record of Revision..........................................................................................................................3
1
2
3
4
5
6
7
8
9
General Specifications..............................................................................................................4
Input/Output Terminals .............................................................................................................5
Absolute Maximum Ratings......................................................................................................6
Electrical Characteristics..........................................................................................................7
Timing Chart...........................................................................................................................10
Optical Characteristics ...........................................................................................................13
Environmental / Reliability Test...............................................................................................17
Mechanical Drawing...............................................................................................................18
Packing Drawing ....................................................................................................................19
10 Precautions For Use of LCD Modules ....................................................................................22
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 2 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
Record of Revision
Rev Issued Date
Description
Editor
1.0
2016-06-02 Preliminary Specification Released.
Hongtao Chang
1. General specifications :
a. Pixel Pitch (mm) changed from
0.1695x0.1695 to 0.178x0.178.
b. LCM (W x H x D) (mm) changed from
258.66x177.30x10.30 to
258.66x177.30x12.45
c. CN2 changed from CN2:JAE
F1-S6P-HE-T-E1500 to CN2:JAE
FI-S6P-HFE-E1500
2. Driving backlight(4.2): Min value of Back light
supply voltage changed from 5.5 to 11.5
1.1 20/ 07/ 2016
Mingxu Xiao
3.Optical Specification(6.1 ) : define value of
viewing angle& chromaticity, value of luminance
changed(Min(400->700);Typ(500->850)
4.Packing Drawing
a. LCM moduel Dimension changed from
231.22x150.60x4.30 to 258.66x177.3x12.45
b. LCM module Quantity changed from 24 to 18
( related 9.1 Dummy packing assembling
changed)
1. General specifications: Pixel Pitch (mm)
changed from 0.178x0.178 to 0.1695x0.1695
1.2
22/09/2016 2. Add CTP character
Dongliang xie
3. Update mechanical drawing and packing
drawing
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 3 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
Spec
1 General Specifications
Feature
Size
10.1 inch
Resolution
Technology Type
1280(RGB) x 800
SFT
Pixel Configuration
Display Spec.
R.G.B. Vertical Stripe
0.1695x0.1695
TM with Normally Black
HC
Pixel Pitch (mm)
Display Mode
Surface Treatment(Up Polarizer)
Viewing Direction
All direction
LCM：229.80x149.0
LCM (W x H x D) (mm)
Active Area(mm)
CTP+LCM：258.66x177.30x12.45
TFT LCD:216.96x135.60
CTP: 220.36x139.00
CTP Structure
G+G（DITO）
CTP Touch Method
PCAP
≤ 5 points @ 7mm copper
cylinders
Number of simultaneous touches
Mechanical
Characteristics
Minimum Touch Area
Φ7mm
Finger Touch Pitch
With /Without TSP
≥2.5xpitch
With CTSP
CN1:JAE FI-SE20P-HFE-E3000
CN2: JAE FI-S6P-HFE-E1500
CN3:MOLEX 53261-0871
Matching Connection Type
TBD
Weight (g)
TFT: LVDS, 6/8bit selectable
CTP:USB
Interface
Electrical
Characteristics
Color Depth
262K/16.7M
TFT:ST5084*1,ST5821*3
CTP:SSD2533QN10
Driver IC
Note 1: Viewing direction for best image quality is different from TFT definition, there is a 180
degree shift.
Note 2 : Requirements on Environmental Protection: Q/S0002
Note 3 : LCM weight tolerance : +/- 5%
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 4 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
2 Input/Output Terminals
2.1 TFT LCD Panel
Connector type: CN1:JAE FI-SE20P-HFE-E3000
CN2: JAE FI-S6P-HFE-E1500
CN3:MOLEX 53261-0871
No
Symbol
I/O
Description
CN1
Comment
1
2
3
IND3+
IND3-
NC
I
I
-
Positive LVDS Differential data input(3)
Negative LVDS Differential data input(3)
No Connection
6bit/8bit mode select
4
SEL6/8
I
H : 6-bit mode
L : 8-bit mode
5
6
7
8
9
VSS
P
I
I
Power Ground
Positive LVDS Differential clock input
Negative LVDS Differential clock input
PINC
NINC-
VSS
P Power Ground
I
I
P Power Ground
I
I
P Power Ground
I
I
IND2+
Positive LVDS Differential data input(2)
Negative LVDS Differential data input(2)
10 IND2-
11 VSS
12 IND1+
13 IND1-
14 VSS
15 IND0+
16 IND0-
17 VSS
18 NC
Positive LVDS Differential data input(1)
Negative LVDS Differential data input(1)
Positive LVDS Differential data input(0)
Negative LVDS Differential data input(0)
P Power Ground
No Connection
-
19 VDD
20 VDD
P Power Supply
P Power Supply
CN2
1
2
3
4
5
6
VLED
VLED
VLSS
VLSS
LED_EN
LED_PWM
P Backlight power supply
P Backlight power supply
P VLED Ground
P VLED Ground
I
I
Backlight on/off control
Backlight dimming control
CN3
1
2
3
4
5
6
7
VDD1
D-
D+
VSS1
NC
NC
P
Power for ctp
I/O USB data- pin
I/O USB data+ pin
P
-
-
-
Power Ground
No Connection
No Connection
No Connection
No Connection
NC
NC
8
-
Note: I/O definition: I-----Input O-----output P----Power/Ground
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 5 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
3 Absolute Maximum Ratings
3.1 Driving TFT LCD Panel
GND=0V
Item
Voltage Input
Symbol
Vin
MIN
-0.50
-20.0
-30.0
--
MAX
5.00
70.0
80.0
≤95
≤85
≤55
≤36
≤24
≤70
Unit
V
Remark
Note1
Operating Temperature
Storage Temperature
Top
℃
Tst
℃
%
Ta≤40℃
--
%
40℃＜Ta≤50℃
50℃＜Ta≤60℃
60℃＜Ta≤70℃
70℃＜Ta≤80℃
Ta＞70℃
Relative Humidity
(Note2)
RH
AH
--
%
--
%
--
%
Absolute Humidity
--
g/m³
Table 3.1 absolute maximum rating
Note1: Input voltage include Rxin0-/+, Rxin1-/+, Rxin2-/+, Rxin3-/+, RxCLK-/+, SEL6/8,VDD.
Note2: Ta means the ambient temperature.
It is necessary to limit the relative humidity to the specified temperature range.
Condensation on the module is not allowed.
3.2 CTP absolute Maximum Ratings
Item
Symbol
VCI
Min.
-0.3
Max
5.5
Unit
V
Remark
Input Voltage
Current Drain Per Pin
Excluding VCI and AVSS
I
--
25
mA
Operating Temperature
Storage Temperature
TOPR
TSTG
-20
-30
70
80
℃
℃
Table 3.2 CTP absolute Maximum Ratings
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 6 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
4 Electrical Characteristics
4.1 Driving TFT LCD Panel
VCC=3.3V,GND=0V, Ta=25℃
Item
Symbol
MIN
TYP
MAX
Unit
Remark
Power supply Voltage
Power supply ripple
Power supply current
Power consumption
Differential input voltage
Differential input common
voltage
VDD
Vp-p
IDD
P
3.00
-
-
-
3.30
-
280
924
-
3.60
100
-
V
mV
mA
mW
mV
-
Note1
|Vid|
200
600
Vcom
VTL
-
1.2
-
-
-
V
Differential
input threshold
voltage
Low level
-100
mV
High level
VTH
-
-
-
-
100
1.5
mV
A
Inrush current
Irush
Table 4.1 LCD module electrical characteristics
|Vid|
Figure4.1 LVDS DC characteristics
Note1: To test the current dissipation, using the “color bar” testing pattern shown as below:
1. White
2. Yellow
3. Cyan
4. Green
5. Magenta
6. Red
7. Blue
8. Black
Figure 4.1.2 Current dissipation testing pattern
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 7 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
CTP recommended Operating Condition
TM101JVHG32-00
4.2
Item
(TA= 25℃,VDD1=5.0V)
Min
Typ
Max Unit Note
3.3
5.0
5.5
power supply voltage
V
IO voltage
1
2
3.3
--
5.0
--
5.5
--
V
Operating mode current
mA
Note1: If there are other voltage requirements, can be realized by changing the design, the
adjustable range is 3.3V to 5.0V.
Note2: All current measurement is average current at Operating mode.
condition (Ta=25℃,VDD1=5V)
No.
Item
Specification
NOTE
，
at the center 2.0mm at the border
1.5mm
Copper stickΦ7
Copper stickΦ7
1
2
3
Linearity
±
±
±
，
at the center 2.0mm at the border
1.5mm
1.5mm
Veracity
Copper stickΦ7
，
at the center 2.0mm at the border
Sensitivity
4.3 Driving Backlight
Ta=25℃
Item
Symbol Min
Typ
12
Max
12.5
-
Unit
V
Remark
Backlight power supply voltage
Backlight power supply current
VLED 11.5
I_LED
-
-
680
mA
Backlight power consumption
P_LED
8160
-
mW
Input voltage for
VLED_PWM
signal
High level
Low level
High level
-
-
-
2.0
0
-
-
-
5.0
0.4
5.0
V
V
V
2.0
Input voltage for
VLED_EN
Low level
-
0
-
-
0.4
10k
100
--
V
HZ
%
VLED_PWM frequency
VLED_PWM duty
Fpwm 200
D
--
0.2
--
Note1
Operating Life Time
50000
hrs Note2
Note 1: According to LED driver IC characteristics, the minimum value of VELD_PWM duty may
vary with VLED_PWM frequency, higher the frequency, bigger the duty.
Note 2: Optical performance should be evaluated at Ta=25℃ only.
If LED is driven by high current, high ambient temperature & humidity condition.The life time
of LED will be reduced.
Operating life means brightness goes down to 50% of initial brightness.
Typical operating life time is estimated data.
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 8 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
4.4 Block Diagram
TM101JVHG32-00
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 9 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
5 Timing Chart
5.1 LVDS signal timing characteristics
VCC=3.3V, GND=0V, Ta=25℃
Symb
Parameter
Min
Typ
Max
Unit
Remark
ol
CLK frequency
1/tclk
62.6 68.2
78.1
164
MHz
thbp + tHFP
Horizontal blanking time
Horizontal back porch
Horizontal display area
Horizontal front porch
Horizontal period
tHBT
tHBP
tHD
20
69
tclk
tclk
-
5
164- tHFP
-
1280
tclk
tclk
tclk
tclk
-
tHFP
tH
15
64
159
1349
1444
1300
Horizontal pulse width
Vertical blanking time
Vertical back porch
tHPW
tVBT
tVBP
-
5
-
1
256
101
42
tH
tH
tVBP + tVFP
2
800
40
842
1
101- tVFP
tH
Vertical display area
Vertical front porch
Vertical period
tVD
tVFP
tV
-
-
tH
tH
tH
HZ
3
99
901
128
-
803
Vertical pulse width
Frame Rate
tVPW
F
-
-
60
Table 5.1 timing parameter
5.2 Input Clock and Data timing Diagram:
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 10 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
Figure 5.2 Input signal data timing
5.3 LVDS data input format
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 11 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
5.4 Power On/Off Sequence
TM101JVHG32-00
Item
VDD on to VDD stable
VDD stable to signal on
Signal on to VLED_EN on
PWM on to VLED_EN on
VLED to PWM on
Symbol
Tp1
Min
0.5
0
200
0
10
0.5
0
500
0
Typ
Max
10
50
-
200
-
10
10
-
50
-
Unit
ms
ms
ms
ms
ms
ms
ms
ms
ms
ms
ms
ms
Remark
-
-
-
-
-
-
-
-
-
-
-
-
Tp2
Tp3
Tp4
Tp5
Tp6
Tp7
Tp8
Tp9
VLED on to VELD stable
VDD off time
VDD off to next VDD on
Signal off before VDD off
VLED_EN off before signal off
VLED_EN off before PWM off
PWM off before VLED off
Tp10
Tp11
Tp12
200
0
10
200
-
Table 5.1 Power on/off sequence
Figure 5.2 Interface power on/off sequence
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 12 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
6 Optical Characteristics
6.1 Optical Specification
Ta=25℃
Remark
Item
Symbol Condition
Min
75
Typ
85
Max
Unit
θT
-
-
-
-
θB
75
85
View Angles
CR≥10
θL
Degree Note 2
75
85
θR
75
85
Note1
Contrast Ratio
Response Time
CR
θ=0°
25℃
600
-
800
25
-
-
Note3
Note1
ms
TON+TOFF
40
Note4
x
y
x
y
x
y
x
y
0.252
0.277
0.532
0.274
0.300
0.532
0.104
0.044
0.302
0.327
0.582
0.324
0.350
0.582
0.154
0.094
0.352
0.377
0.632
0.374
0.400
0.632
0.204
0.144
White
Red
Note5
Backlight is
on
Chromaticity
-
Note1
Green
Blue
Note1
%
Uniformity
NTSC
U
-
-
-
75
45
80
50
-
-
-
Note6
%
Note 5
Note1
Note7
Luminance
L
700
850
cd/m2
Test Conditions:
1. The ambient temperature is 25±2℃. humidity is 65±7%
2. The test systems refer to Note 1 and Note 2.
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 13 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
Note 1: Definition of optical measurement system.
The optical characteristics should be measured in dark room. After 5 minutes operation, the optical
properties are measured at the center point of the LCD screen. All input terminals LCD panel must
be ground when measuring the center area of the panel.
Photo detector
Field
500mm
TFT-LCD Module
LCD Panel
The center of the screen
Note 2: Definition of viewing angle range and measurement system.
viewing angle is measured at the center point of the LCD。
Fig. 1 Definition of viewing angle
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 14 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
Note 3: Definition of contrast ratio
“White state “:The state is that the LCD should driven by Vwhite.
“Black state”: The state is that the LCD should driven by Vblack.
Vwhite: To be determined Vblack: To be determined.
Note 4: Definition of Response time
The response time is defined as the LCD optical switching time interval between “White” state and
“Black” state. Rise time (TON) is the time between photo detector output intensity changed from
90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from
10% to 90%.
Note 5: Definition of color chromaticity (CIE1931)
Color coordinates measured at center point of LCD.
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 15 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
Note 6: Definition of Luminance Uniformity
Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is placed at the
center of each measuring area.
Luminance Uniformity(U) = Lmin/ Lmax
L-------Active area length W----- Active area width
Fig. 2 Definition of uniformity
Lmax: The measured maximum luminance of all measurement position.
Lmin: The measured minimum luminance of all measurement position.
Note 7: Definition of Luminance :
Measure the luminance of white state at center point.
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 16 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
Remark
7 Environmental / Reliability Test
No
Test Item
High Temperature
Operation
Condition
Ts=+70℃, 240hrs
(Note1)
1
IEC60068-2-1:2007,GB2423.2-2008
IEC60068-2-1:2007
GB2423.1-2008
IEC60068-2-1:2007
GB2423.2-2008
Low Temperature
Operation
High Temperature
Ta=-20℃, 240hrs
Ta=+80℃, 240hrs
2
3 Storage
(non-operation)
Low Temperature
4 Storage
IEC60068-2-1:2007
GB2423.1-2008
Ta=-30℃, 240hrs
(non-operation)
High Temperature &
(Note2)
Ta = +60℃, 90% RH max,240
5 High Humidity
Operation
IEC60068-2-78 :2001
GB/T2423.3—2006
hours
Start with cold temperature,
End with high temperature,
IEC60068-2-14:1984,GB2423.22-2002
IEC61000-4-2:2001
-30℃ 30 min~+80℃ 30 min,
Change time:5min,100cycles
Thermal Shock
6
(non-operation)
C=150pF,R=330Ω;
Contact:±4Kv, 5times;
Air:±8KV,5times;
Electro Static
7 Discharge
(operation)
GB/T17626.2-2006
Frequency range:10～55Hz,
Stroke:1.5mm
Sweep:10Hz ～ 55Hz ～ 10Hz
2hours for each direction of
X.Y.Z (6 hours total)
Vibration
8
IEC60068-2-6:1982
GB/T2423.10—1995
(non-operation)
Shock
(non-operation)
60G 6ms, ±X,±Y,±Z 3 times IEC60068-2-27:1987
9
for each direction
GB/T2423.5—1995
IEC60068-2-32:1990
GB/T2423.8—1995
Height:60 cm,1 corner, 3
edges, 6 surfaces
10 Package Drop Test
Note1: Ts is the temperature of panel’s surface.
Note2: Ta is the ambient temperature of sample.
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 17 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
8 Mechanical Drawing
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 18 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
Quantity Remark
9 Packing Drawing
Unit
Weight(Kg)
No
Item
Model (Material) Dimensions(mm)
1 LCM module
2 Tray
TM101JVHG32-00 258.66x177.3x12.45
0.4651
18
12
3
PET(Transmit)
485×330×21mm
600×500×0.08mm
520×345×74mm
45×35mm
0.0224
3 Anti-Static Bag PE
0.05
4
BOX
Corrugated Paper
Desiccant
0.3879
0.002
3
6
1
5 Desiccant
6
×
Label
Paper
100 52mm
0.0001
7
×
×
Carton
Corrugated paper
544 365 250mm
1.01
1
8 Total weight(Kg)
10.98kg±5%
The packing method is shown as below:
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 19 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
9.1 Dummy packing assembling
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 20 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
9.2 Stacking method(2x3x5)
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 21 of 22
SHANGHAI TIANMA MICRO-ELECTRONICS
TM101JVHG32-00
10 Precautions For Use of LCD Modules
10.1
Handling Precautions
10.1.1
The display panel is made of glass. Do not subject it to a mechanical shock by
dropping it from a high place, etc.
10.1.2 If the display panel is damaged and the liquid crystal substance inside it leaks out, be
sure not to get any in your mouth, if the substance comes into contact with your skin or
clothes, promptly wash it off using soap and water.
10.1.3
Do not apply excessive force to the display surface or the adjoining areas since this
may cause the color tone to vary.
10.1.4 The polarizer covering the display surface of the LCD module is soft and easily scratched.
Handle this polarizer carefully.
10.1.5 If the display surface is contaminated, breathe on the surface and gently wipe it with a
soft dry cloth. If still not completely clear, moisten cloth with one of the following solvents:
－ Isopropyl alcohol
－ Ethyl alcohol
Solvents other than those mentioned above may damage the polarizer. Especially, do not
use the following:
－ Water
－ Ketone
－ Aromatic solvents
10.1.6 Do not attempt to disassemble the LCD Module.
10.1.7 If the logic circuit power is off, do not apply the input signals.
10.1.8 To prevent destruction of the elements by static electricity, be careful to maintain an
optimum work environment.
10.1.8.1 Be sure to ground the body when handling the LCD Modules.
10.1.8.2 Tools required for assembly, such as soldering irons, must be properly ground.
10.1.8.3 To reduce the amount of static electricity generated, do not conduct assembly and
other work under dry conditions.
10.1.8.4 The LCD Module is coated with a film to protect the display surface. Be care when
peeling off this protective film since static electricity may be generated.
10.2
Storage Precautions
10.2.1 When storing the LCD modules, avoid exposure to direct sunlight or to the light of
fluorescent lamps.
10.2.2 The LCD modules should be stored under the storage temperature range. If the LCD
modules will be stored for a long time, the recommend condition is:
Temperature : 0℃ ～ 40℃
Relatively humidity: ≤80%
10.2.3 The LCD modules should be stored in the room without acid, alkali and harmful gas.
10.3
Transportation Precautions
The LCD modules should be no falling and violent shocking during transportation, and also
should avoid excessive press, water, damp and sunshine.
The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation.
Page 22 of 22
相关型号：
©2020 ICPDF网 联系我们和版权申明