U1206F220BCT [ETC]

Multilayer Ceramic Capacitors; 多层陶瓷电容器


型号：	U1206F220BCT
厂家：	ETC
描述：	Multilayer Ceramic Capacitors 多层陶瓷电容器电容器陶瓷电容器
文件：	总5页 (文件大小：436K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Multilayer Ceramic Capacitors

Features:

•

A wide selection of sizes is available (0402 to 1812)

High capacitance in given case size

Capacitor with lead-free termination (pure Tin)

Description

MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density

and high efficiency, ceramic condensers are used.

POE’s MLCC is made by NP0, X7R and Y5V dielectric material and which provides product with high electrical precision, stability and

reliability.

Applications

For general digital circuit.

For power supply bypass capacitors.

For consumer electronics.

For telecommunication.

External Dimensions

(mm)

Size

T (mm)/Symbol

0.8 ±0.07

Remark

Inches (mm)

(mm)

1.6 ±0.1

0.8 ±0.1

0603 (1608)

0805 (2012)

0.4 ±0.15

1.6

0.8

+0.15 /- 0.1

+0.15 / -0.1

0.6 ±0.1

0.8 ±0.1

2 ±0.15

1.25 ±0.1

1.6 ±0.15

0.5 ±0.2

0.6 ±0.2

1.25 ±0.1

0.8 ±0.1

0.95 ±0.1

1.15 ±0.15

1.25 ±0.1

1.6 ±0.2

3.2 ±0.15

1206 (3216)

3.2 ±0.2

1.6 ±0.2

3.2 +0.3 / -0.1

1.6 +0.3 / -0.1

Dimensions : Inches (Millimetres)

# Reflow soldering only is recommended.

General Electrical Data

Dielectric

NPO

X7R

Y5V

Size

0603, 0805, 1206

Capacitance range*

0.5 pF to 0.039 µF

100 pF to 1 µF

10 nF to 680 nF

Cap ≤ 5 pF: B (±0.1 pF), C (±0.25 pF)

5 pF< Cap < 10 pF: C (±0.25 pF), D (±0.5 pF)

Cap ≥ 10 pF: F (±1%), G (±2%), J (±5%), K

(±10%)

J (±5%), K (±10%), M

(±20%)

Capacitance tolerance**

M (±20%), Z (-20 / +80%)

www.element14.com

www.farnell.com

www.newark.com

Page <1>

14/01/12 V1.1

Multilayer Ceramic Capacitors

General Electrical Data

Dielectric

Rated voltage (WVDC)

Tan δ*

NPO

X7R

Y5V

16 V, 25 V, 50 V, 100 V

10 V, 16 V, 25 V, 50 V, 100 V

Note 1

Cap < 30 pF: Q ≥ 400+20C

Cap ≥ 30 pF: Q ≥ 1,000

Insulation resistance at Ur

Operating temperature

Capacitance characteristic

Termination

≥ 10 Ω or R × C ≥ 500 Ω × F whichever is less

-55°C to +125°C

-25 to +85°C

+30 / -80%

±30 ppm

Ni / Sn (lead-free termination)

±15%

* Measured at the condition of 30 to 70% related humidity

NP0 : Apply 1 ±0.2 V

temperature

, 1 MHz ±10% for Cap ≤ 1,000 pF and 1 ±0.2 V

, 1 kHz ±10% for Cap>1,000 pF, 25°C at ambient

rms

X7R : Apply 1 ±0.2 V

Y5V : Apply 1 ±0.2 V

, 1 kHz ± 10%, at 25°C ambient temperature

, 1 kHz ±10%, at 20°C ambient temperature

rms

** Preconditioning for Class II MLCC: Perform a heat treatment at 150 ±10°C for 1 hour, then leave in ambient condition for 24 ±2

hours before measurement.

Note 1:

X7R

Rated vol.

D.F.

Exception of D.F.

0603 ≥ 0.047 µF; 0805 ≥ 0.18 µF,

1206 ≥ 0.47 µF

≥ 50 V

≤ 2.5%

≤ 3%

≤ 5%

≤ 7%

10%

0805 ≥ 1 µF; 1210 ≥ 10 µF

0603 ≥ 0.33 µF

25 V

16 V

10 V

≤ 3.5%

≤ 5.0%

0402 ≥ 0.1 µF; 0603 ≥ 0.68 µF

0402 ≥ 0.033 µF; 0603 ≥ 0.15 µF;

0805 ≥ 0.68 µF; 1206 ≥ 2.2 µF

≤ 5%

≤ 10%

1210 ≥ 22 µF; 0603 ≥ 0.68 µF

0603 ≥ 0.33 µF; 0805 ≥ 2.2 µF

Y5V

Rated vol.

D.F.

Exception of D.F.

≥ 50 V

≤ 5.0%

7.0%

0603 ≥ 0.1 µF; 0805 ≥ 0.47 µF

0402 ≥ 0.047 µF; 0603 ≥ 0.1 µF;

0805 ≥ 0.33 µF; 1206 ≥ 1 µF

≤7%

25V

≤ 5.0%

≤ 9%

0402 ≥ 0.068 µF; 0603 ≥ 0.47 µF

0402 ≥ 0.068 µF; 0603 ≥ 0.68 µF

16 V (C < 1 µF)

16 V (C ≥ 1 µF)

10 V

≤ 7.0%

≤ 9.0%

≤ 12.5%

0805 ≥ 3.3 µF; 1206 ≥ 10 µF;

1210 ≥ 22 µF; 1812 ≥ 47µF

≤ 12.5%

0402 ≥ 0.47 µF

www.element14.com

www.farnell.com

www.newark.com

Page <2>

14/01/12 V1.1

Multilayer Ceramic Capacitors

Capacitance Range (0603)

Dielectric

NP0

X7R

Y5V

Size

0603

Rated Voltage

(V dc)

(V)

22 pF (220)

100 pF (101)

220 pF (221)

1,000 pF (102)

0.1 µF (104)

220 pF (221)

470 pF (471)

0.010 µF (103)

1. The letter in cell is expressed the symbol of product thickness.

Capacitance Range (0805)

Dielectric

NP0

X7R

0805

Y5V

Size

Rated Voltage

(V dc)

100

(V)

100

(V)

1,000 pF (102)

2,200 pF (222)

0.22 µF (224)

0.33 µF (334)

0.47 µF (474)

100 pF

220 pF

470 pF

0.22 µF (224)

0.33 µF (334)

0.47 µF (474)

0.010 µF (103)

0.022 µF (223)

0.047 µF (473)

0.1 µF (104)

1. The letter in cell is expressed the symbol of product thickness.

www.element14.com

www.farnell.com

www.newark.com

Page <3>

14/01/12 V1.1

Multilayer Ceramic Capacitors

Capacitance Range (1206)

Dielectric

NP0

X7R

1206

Y5V

Size

Rated Voltage

(V dc)

(V)

0.33 µF

0.47 µF

10 nF

100 nF

1. The letter in cell is expressed the symbol of product thickness.

Recommended soldering conditions

The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-

containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2

within oven are recommended.

Recommended IR reflow soldering profile for SMT process

with SnAgCu series solder paste.

www.element14.com

www.farnell.com

www.newark.com

Page <4>

14/01/12 V1.1

Multilayer Ceramic Capacitors

Recommended wave soldering profile for SMT process

with SnAgCu series solder.

Part Number Explanation:

220

0603

Rated Voltage

Size

Dielectric Capacitance

Tolerance Termination Packaging

Rated Voltage : Two significant digits followed by no. of zeros and R is in place of decimal point)

A = 100 V, B = 16 V, T = 25 V and U = 50 V

Size

: 0603 inches (1608 mm), 0805 inches (2012 mm) and 1206 inches (3216 mm)

: C = NP0 (C0G), R = X7R and F = Y5V

Dielectric

Capacitance

: Two significant digits followed by number of zeros and R is in place of decimal point

eg: 102 = 10 x 10²= 1,000 pF

Tolerance

Termination

Packaging

: B = ±0.1 pF, C = ±0.25 pF, D = ±0.5 pF, F = ±1%, G = +2% and J = +5%

: C = Cu / Ni / Sn

: T = 7 inches reeled

Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes

in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.

The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data

sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage

resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.

This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.

www.element14.com

www.farnell.com

www.newark.com

Page <5>

14/01/12 V1.1

相关型号：