USC-DINHSXSYR2LTX [ETC]

Digital Panel Meters Modular signal conditioner; 数字面板表模块化信号调理器


型号：	USC-DINHSXSYR2LTX
厂家：	ETC
描述：	Digital Panel Meters Modular signal conditioner 数字面板表模块化信号调理器
文件：	总12页 (文件大小：400K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Digital Panel Meters

Modular signal conditioner

Type USC-DIN

•

Multi-input modular signal’s conditioner

• 0.1% RDG basic accuracy

• TRMS AC current and voltage measurements

• AC/DC current measurements; selectable full scales

(200µA to 5A)

• AC/DC voltage measurements; selectable full scales

(200mV to 500V)

• °C or °F temperature measurements

(Pt100-250-500-1000, Ni100, TC J-K-S-T-E)

• Resistance measurements; selectable full scales

(20Ω to 20kΩ)

• Up to 4 independent alarm set-points (optional)

• 20mA/10VDC analog output (optional)

• Serial port RS485 or RS232 (optional)

• MODBUS, JBUS communication protocol

• Front protection degree: IP 20

• Linearization of V and A inputs up to 16 points

Product Description

How to order

USC XXX XX XX XX X XX

µp-based signal’s condition-

er, for current, voltage, tem-

perature and resistance

measurements. Measuring

ranges and functions easily

programmable from the PC

by means of optional Usc-

Soft software available on

request. UscSoft includes

programming, display and

min-max functions. Condi-

tioner’s housing for DIN-

RAIL mounting with front

protection degree: IP 20. All

displaying and programming

data are referred to UscSoft.

Model

Slot A

Slot B

Slot C

Slot D

Slot E

Options

How to order

UscSoft-kit

UscSoft-kit: software plus “UCOM1” communication cable for

programming USC by means of PC.

Type Selection

Slot A (measuring inputs)

Slot B (communication)

Slot C (communication and alarm) Slot D (communication)

XX:

None

LSX: single channel input:

0.2-2-20mA DC/AC,

0.2-2-20V DC/AC

XX:

SX:

SY:

None

Serial port RS485

Serial port RS232

XX:

R1:

None

AV(*): Single analogue out-

put,

Single relay output,

(AC1-8AAC, 250VAC)

Dual relay output,

(AC1-8AAC, 250VAC)

Dual relay output,

(AC1-8AAC, 250VAC)

dual open collector out-

put (NPN, 100mA)

4 Relay outputs (AC1-

5AAC, 250VAC)

0 to 20mA DC and

0 to 10V DC

LSE/

R2:

R4:

LSF: single + AUX input :

0.2-2-20mA DC/AC;

0.2-2-20V DC/AC

(*):

The two analogue

outputs cannot be

used at the same

time. It is possible to

plug in only one

module by signal

conditioner.

HSX: single channel input:

0.2-2-5A DC/AC;

20-200-500V DC/AC

TRX: signal input: TC tem-

perature probes: J-K-S-

T-E, Pt100-250-500-

1000 and resistance

0.02-0.2-2-20kΩ

R5:

AV(*): Single analogue out-

put:

0 to 20mA DC and

0 to 10V DC

Options

Slot E (power supply)

XX:

TX:

None

Tropicalization

90 to 260V AC/DC

18 to 60V AC/DC

Specifications are subject to change without notice USCDS040706

USC

USC architecture

AUXILIARY DIGITAL INPUTS

1 alarm

2 alarms l 4 alarms

(FUTURE FUNCTION)

ALARM OUTPUTS

COMMUNICATION

Remote programming by

means of PC

Analogue outputs:

1 x 20mA/10V DC

Measuring inputs:

Serial ports:

DC/AC: mA-mV-V

DC/AC: A-V

°C/°F: TC-Pt-Ni-Ω

POWER SUPPLY

INTERNAL BUS

RS485

RS232

Digital input:

MEASURING INPUTS +

DIGITAL INPUTS +

AUXILIARY POWER SUPPLY

Alarm reset

Auxiliary power supply:

90 to 260V AC/DC

18 to 60V AC/DC

13V / 50mA DC

25V / 25mA CC

Input Specifications

Analogue inputs

BQ LSX module

BQ LSE/LSF module

BQ HSX module

BQ TRX module

Measuring module

and max min indications”

1, mA and V DC/AC

1, mA and V DC/AC + AUX

1, A and V DC/AC

1, temperature

1, resistance

Incl. in the measuring module

1 (voltage-free)

Measurements

Current, voltage, tempera-

ture and resistance. For the

current and voltage mea-

surements: TRMS measure-

ment of distorted sine

waves.

Digital inputs (CMD)

Number of inputs

Use

Coupling

Crest factor

Direct.

Reset of latch alarms

BQ xxx: <0.1mA, <3.5V DC

BQ LSE/LSF: <2.5mA,

<14V DC

≤3; A_Pmax=1,7In; V_Pmax=1,7Un

See table “input

impedances and overloads”

Contact reading signal

Input impedance

Frequency

Overload

40 to 440 Hz

Close contact resistance

Open contact resistance

Insulation

Max 1kΩ

Min 500kΩ

See table “input

impedances and overloads”

Non-insulated

Accuracy (RS485)

See table “Measuring

accuracy”, temperature drifts

and minimum-maximum

indications”

Compensation

Only temperature

measurement module.

- For Pt 100-250-500-1000,

3-wire connection: up to 10Ω

- For resistance measur. with

20Ω range: up to max 0.1Ω

- For resistance measurements

with ≥200Ωrange: up to max 10Ω

Internal cold junction, within

temperature range from

0 to +50°C.

RTD

Additional errors

Humidity

Input frequency

Magnetic field

0.3% RDG, 60% to 90% R.H.

0.4% RDG, 62 to 440 Hz

0.5% RDG @ 400 A/m

Temperature drift

See table “Measuring

accuracy, temperature drifts and

maximum minimum indications”

Automatic or manual

compensation from 0 to 50°C.

Sampling rate

BQ LSX module

BQ LSE/LSF module

BQ HSX module

BQ TRX module

500 samples/s @ 50Hz

Measurement updating

200 msec @ 50 Hz

Resolution of measurements

Max. and min. indications

10.000 points (4-dgt)

See table “Measurement

accuracy, temperature drifts

Specifications are subject to change without notice USCDS0407063

USC

Measurement accuracy, temp. drifts, max and min indications

All accuracies and min/max indications are referred to an ambient temp. range of 25°C 5°C, rel. humidity ≤60% and scale ratio (electri-

cal/displayed scale) equal to 1. The conversion into °F is obtained acting on the electrical/displayed scale ratio.

Module

Inputs

Type

Accuracy

Temp. drift

Min. indication (<)

Max. indicat. (<)

DC: (0.1%RDG+3DGT)

0%to 25% FS;

-200µA to +200µA

-2mA to +2mA

-20mA to +20mA

-200mV to +200mV

-2V to +2V

- 200.0

- 2.000

- 20.00

- 200.0

- 2.000

- 20.00

+ 200.0

+ 2.000

+ 20.00

+ 200.0

+ 2,000

+ 20.00

(0.1%RDG+2DGT)

25% to 110% FS.

TRMS (45 to 65Hz)*:

(0.3%RDG+3DGT)

0% to 25% FS;

BQ LSX/

BQ LSE/

BQ LSF

DC/AC

150 ppm/°C

-20V to +20V

(0.3%RDG+2DGT)

25% to 110% FS.

DC: (0.1%RDG+3DGT)

0% to 25% FS;

-200mA to +200mA

-2A to +2A

- 200.0

- 2.000

- 5.000

- 20.00

- 200.0

- 500.0

+ 200.0

+ 2.000

+ 5.000

+ 20.00

+ 200.0

+ 500.0

(0.1%RDG+2DGT)

25% to 110% FS.

DC/AC TRMS ( 45 to 65Hz)*:

(0.3%RDG+3DGT)

0% to 25% FS;

-5A to +5A

BQ HSX

150 ppm/°C

-20V to +20V

-200V to +200V

-500V to +500V

(0.3%RDG+2DGT)

25% to 110% FS.

-50°C to +760°C

-58 °F to +1400 °F

-200°C to +1260°C

-328 °F to +2300°F

-200°C to +1000°C

-328°F to +1832°F

-50°C to +1750°C

-58°F to +3182°F

-200°C to +400°C

-328°F to +752°F

(0.2%RDG+1DGT)

(0.2%RDG+2DGT)

(0.2%RDG+4DGT)

(0.2%RDG+2DGT)

(0.2%RDG+4DGT)

(0.2%RDG+2DGT)

(0.2%RDG+4DGT)

(0.2%RDG+2DGT)

(0.2%RDG+4DGT)

- 50°C

- 58°F

+ 760°C

+ 1400°F

+ 1260°C

+ 2300°F

+ 100°C

+ 1832°F

+ 1750°C

+ 3182°F

+ 400°C

+ 752°F

- 200°C

- 328°F

- 200°C

- 328°F

- 50°C

- 58°F

BQ TRX

Thermo-

couple

150 ppm/°C

- 200°C

- 328°F

-200°C to +850°C Pt100

-328°F to +1562°F Pt100

-200.0°C to +200.0°C Pt100

(0.2%RDG +2DGT)

(0.2%RDG +4DGT)

(0.5%RDG +5DGT)

(0.5%RDG +1DGT)

(0.5%RDG +2DGT)

- 200

- 328

- 200.0

- 328

- 200.0

- 328

- 200.0

- 328

- 200.0

- 328

- 60

+ 850

+ 1562

+ 200.0

+ 392

+ 200.0

+ 392

+ 200.0

+ 392

+ 200.0

+ 392

-328°F to +392°F

-200.0°C to +200.0°C Pt250

-328°F to +392°F Pt250

-200.0°C to +200.0°C Pt500

-328°F to +392°F Pt500

Pt100

BQ TRX

Thermo-

resis-

150 ppm/°C

tance

-200.0°C to +200.0°C Pt1000

-328°F to +392°F Pt1000

-60°C to +180°C

-76°F to +356°F

Ni100

+ 180

+ 356

- 76

0 to 20Ω

0 to 200Ω

0 to 2000Ω

0 to 20.00kΩ

(0.2%RDG+2DGT)

25% to 110% FS

(0.2%RDG+3DGT)

0% to 25% FS

20.00 (<)

200.0 (<)

2000 (<)

20.00 (<)

BQ TRX

Resis-

tance

Ω

150 ppm/°C

(*) <45Hz, >65Hz: (0.5%RDG+3DGT) 0% to 25% FS; (0.5%RDG+2DGT) 25% to 110% FS.

(<) The min. indication for TRMS measurement (AC or DC) is 0; it is possible to modify the decimal point position.

Specifications are subject to change without notice USCDS040706

USC

Input impedances and overloads

Module

Inputs

Type

Impedance

Overload (continuous)

Overload (1s)

-200µA to +200µA

-2mA to +2mA

-20mA to +20mA

-200mV to +200mV

-2V to +2V

AC/DC

≤2.2kΩ

≤22Ω

5mA

50mA

10V

50V

10mA

150mA

20V

100V

BQ LSX/

BQ LSE/

BQ LSF

≤22Ω

≥2.2kΩ

≥200kΩ

-20V to +20V

-200mA to +200mA

-2A to +2A

AC/DC

≤1Ω

≤0.012Ω

≥2MΩ

0.8A

7.5A

750V

100A

1000V

-5A to +5A

BQ HSX

-20V to +20V

-200V to +200V

-500V to +500V

≥2MΩ

-50°C to +760°C

-58 °F to +1400 °F

-200°C to +1260°C

-328 °F to +2300°F

-200°C to +1000°C

-328°F to +1832°F

-50°C to +1750°C

-58°F to +3182°F

-200°C to +400°C

-328°F to +752°F

BQ TRX

Thermo-

couple

I_LK<0.5µA

Max 5V

Max 10V

-200°C to +850°C

-328°F to +1562°F

-200,0°C to +200,0°C

-328°F to +392°F

Pt100

Pt250/Pt100

800µA (*)

90µA (*)

BQ TRX

Thermoresis-

tance

90µA (*)

Max 5V

Max 10V

-200,0°C to +200.0°C Pt1000/Pt500

800µA (*)

-328°F to +392°F

-60°C to +180°C

-76°F to +356°F

Pt1000/Pt500

Ni100

0 to 20Ω

0 to 200Ω

0 to 2000Ω

0 to 20.00kΩ

800µA (*)

90µA (*)

800µA (*)

90µA (*)

BQ TRX

Resistance

Ω

Output specifications

RS422/RS485

Serial output

LED

(on request)

Module: BR SX

Bidirectional (static and

dynamic variables).

Display of data

reception/transmission

Multidrop, 2 or 4 wires,

1000m

Directly on the module

by means of jumper

1 to 255, selectable

by means of software

MODBUS RTU/JBUS

Data format

Baud rate

Insulation

8 data bit, no parity,

1 stop bit

selectable 4800, 9600,19200

and 38400 bit/s

By means of opto-couplers

4000 V_rmsoutput to

measuring inputs

4000 V_rmsoutput to

power supply input

Connections

Distance

Terminalization

RS232

(on request)

Module: BR SY

Addresses

Serial output

Bidirectional (static and

dynamic variables)

3 wires,

Protocol

Data (bidirectional)

Connections

Distance

Data format

Dynamic (reading only)

Measurement, min value

max value

alarm status

All programming parameters,

min max reset

max. 15m

1 start bit, 8 data bit,

no parity, 1 stop bit

selectable 4800, 9600,

19200 and 38400 bit/s

As per RS422/485

Static (reading/writing)

Baud rate

Other characteristics

(*) Max. generated measuring current for resistance equal to 0Ω

Specifications are subject to change without notice USCDS0407063

USC

Output characteristics (continuous)

Alarm output

(on request)

Open collector output

Insulation

NPN transistor type

V_ON1.2 VDC/ max. 100 mA

V_OFF30 VDC max.

By means of opto-couplers

4000 V_RMSoutput to

measuring input

4000 V_RMSoutput to

power supply input

Alarm type

Over-range alarm,

up alarm,

down alarm,

down alarm with

start-up deactivation

up alarm with latch,

down alarm with latch

Adjustable from 0 to 100%

of displayed electric range

0 to 100% of displayed range

0 to 255 s

Alarm set-point

Single analogue output

(on request)

Module: BO AV

Hysteresis

Range

Scaling factor

0 to 20 mADC, 0 to 10 VDC

Programmable within the

entire retransmission range;

allows to manage the

retransmission of all the

values from

0 to 20 mA / 0 to 10V

0.2% FS (@ 25°C 5°C)

≤ 10 ms

200 ppm/°C

≤ 700 Ω

≥ 10 kΩ

By means of opto-couplers

4000V_rmsoutput to

measuring input

On-time delay

Off-time delay

Output status

0 to 255 s

Selectable: normally energized

/de-energized

Min response time

Output channels

500 ms, with filter excluded,

without alarm activation delay

1 with module BO R1

(relay output).

2, independent with module

BO R2 (2 relay outputs).

4, independent with module

BO R4 (2 relay outputs +

2 open collector outputs).

BO R5 (4 relay outputs).

Type SPDT

AC 1: 8A, 250VAC

DC 12: 5A, 24VDC

AC 15: 2.5A, 250VAC

DC 13: 2.5A, 24VDC

Type SPST (NO)

AC 1: 5A, 250VAC

DC 12: 3A, 24VDC

AC 15: 1.5A, 250VAC

DC 13: 1.5A, 24VDC

4000 V_RMSoutput to

measuring input,

Accuracy

Response time

Termperature drift

Load: 20 mA output

10 V output

Insulation

BO R1, R2, R4 relay outputs

BO R5 relay output

Insulation

4000V output to

rms

power supply input

The two outputs cannot be

used at the same time.

Notes:

Excitation output

BQ LSE Module

(on request)

Voltage

13 VDC 10%

max. 50 mA

BQ LSF Module

Voltage

25 VDC 10%

max. 25 mA

25V_rmsoutput to

measuring input

4000 V_rmsoutput to

power supply input

4000 V_RMSoutput to

power supply input.

Insulation

Software functions

Min / Max storage

Automatic storage

displayed scale

(in the EEPROM) of the

minimum and maximum

measured value from the

previous memory reset

compression/expansion

(max. 2 without filter, up to

10 with filter)

Programmable within the

whole measuring range

Programmable within the

display range

Electrical range

Measurement selection

Integration time selection

Depending on the module:

measuring range and type of

probe (resistance, RTD

thermoresistance, TC

thermocouple) or measuring

type (TRMS or DC).

Decimal point position

Displayed range of the variable Programmable within the

display range

Diagnostics (only with Usc Soft) The display flashes when the

limits of the display range

Automatic or from 100.0 to

999.9 ms only in the current

and voltage measurement.

are exceeded and the data

are updated up to 20%

of the rated display range.

Only temperature inputs

Scaling factors

Operating mode

Burn-out:

Electrical scale compression,

Specifications are subject to change without notice USCDS040706

USC

Software functions (continuous)

Opening of probe’s

connection: EEE indication

Opening of probe’s

connection: EEE indication

probe’s short circuit:

-EEE indication.

Linearization

Points

Input range

Up to 16

Selectable by every

single point

Selectable by every

single point

RTD

Output range

Digital filter

Filter operating range

Filtering coefficient

UscSoft

Software for

programming USC

by means of PC (Windows 95,

98se, ME, XP) by means of

serial port RS485 and

relevant connection cable.

UscSoft includes

0 to 9999

1 to 32

Scaling

Selection of min value

of the input range.

Selection of max value of

the input range.

programming, displaying,

min-max storage functions.

The software is available in

English, Spanish, Italian,

German and French. See

also “The programming of

USC by means of PC”.

Selection of decimal point

position.

Selection of min

display value.

Selection of max display

value.

General Specifications

Operating

temperature

0° to 50°C (32° to 122°F)

(H.R. < 90% non-condensing)

Safety Standards

Safety

EN 61010-1, IEC 61010-1

Storage

temperature

-10° to 60°C (14° to 140°F)

(H.R. < 90% non-condensing)

Connections

Wire section

Screw type

Max 2.5mm²

Insulation reference

voltage

Insulation

300 V_RMSto ground

(500V input)

Housing

Dimensions

Material

44 x 113 x 107 mm

PC-ABS,

self-extinguishing: UL 94 V-0

See table “Insulation between

inputs and outputs”

Protection degree

Weight

IP20

Dielectric strength

Rejection

NMRR

4000 V_RMSfor 1 minute

560 g approx (included all

modules and packing)

40 dB, 40 to 60 Hz

100 dB, 40 to 60 Hz

CMRR

Approvals

CE, UR, CSA

EMC

EN61000-6-2, IEC61000-6-2

EN61000-6-3, IEC61000-6-3

Supply Specifications

AC/DC voltage

90 to 260V (standard)

18 to 60V (on request)

Energy consumption

≤ 30VA/12W (90 to 260V)

≤ 20VA/12W (18 to 60V)

Specifications are subject to change without notice USCDS0407063

USC

Excitation output

Insulation between inputs and outputs

Meas. Relay Static Analogue Serial

AUX

90-260VAC/ 18-60VAC/

inputs output output output

Port p.supply DC p. supply DC p.supply

Meas.

inputs

4kV

2kV

4kV

25V

4kV

Continuous

max. 30 s.

Relay Out-

put

4kV

Static Out-

put

2kV

4kV

Analogue

Output

4kV

BQ LSE

Serial Port 4kV

4kV

AUX

25V

4kV

p.supply

90/260VAC/

4kV

DC p. supply

18-60VAC

4kV

DC p. supply

Available modules

Possible module combinations

N. of

channels

Slot

Type

Ordering

code

Basic Unit

USC main unit

BD XX

Measuring inputs:

LSX, LSE, LSF, HSX, TRX

DC/AC input: 200µA , 2mA, 20mA,

200mV, 2V, 20V

DC/AC input: 200µA , 2mA, 20mA,

200mV, 2V, 20V + excitation output

DC/AC input: 200mA, 2A, 5A,

20V, 200V, 500V

Input: 20Ω, 200Ω, 2kΩ, 20kΩ

TC: J-K-S-T-E, Pt100-250-500-1000, Ni100

Analogue output 0 to 20mA, 0 to 10V

Relay output

BQ LSX

RS485 serial port: SX

RS232 serial port: SY

Analogue output: AV (*)

BQ LSE/

BQ LSF

BQ HSX

Relay outputs and/or open

collector: R1, R2, R4, R5

BQ TRX

BO AV

BO R1

BO R2

BO R4

BO R5

BR SX

BR SY

BP L

Power supply: H, L

(*) Up to 1 module max.

Relay output

Outputs: 2 relays + 2 open collectors

Relay output

RS485 Serial Port

RS232 Serial Port

Power supply 18 to 60V AC/DC

Power supply 90 to 260V AC/DC

BP H

Used calculation formulas

Only for TRMS Measurements

(V )

Instantaneous effective

voltage (TRMS)

Instantaneous effective

current (TRMS)

( A )

Specifications are subject to change without notice USCDS040706

USC

Wiring diagrams

Process signal wiring diagrams

BQ LSX/LSE/LSF

BQ LSE/LSF

Fig. 1

Fig. 2

Fig. 3

+ Vdc

Voltage measurements

4-wire connection to probe

Current measurements

Voltage measurements

BQ LSE/LSF

Fig. 4

Fig. 5

Fig. 6

+ Vdc

Voltage measurements

Current measurements

3-wire connection to probe

4-wire connection to probe

3-wire connection to probe

Wirings for high-level signals

BQ HSX

BQ LSE/LSF

Fig. 8

Fig. 9

Fig. 7

+ Vdc

Current measurements

2-wire connection to probe

Current measurements

Voltage measurements

Specifications are subject to change without notice USCDS0407063

USC

Wiring diagrams (cont.)

Wiring diagrams for temperature measurements

BQ TRX

Fig. 10

Fig. 11

Fig. 12

Temp. measur. from thermoresistance

Temp. measur. from thermocouple

Resistance measurements

Wiring diagrams for power supply

BP H: power supply

BP L: power supply

F1= 630mA T

250V 5x20mm

F1= 3.15A T

250V 5x20mm

Wiring diagrams of optional modules

BO AV: single analogue

output (10V, 20mA)

BO R1: 1 relay output

BO R2: 2 relay outputs

BO R5: 4 relay outputs

Specifications are subject to change without notice USCDS040706

USC

Wiring diagrams of optional modules (cont.)

BO SY: RS232 direct

connection to PC by

means of COM port.

RS232 has no termi-

nalization.

LED

GND

Vdc

BO R4: dual relay output +dual open collector output:

the load resistances (Rc) must be designed so that the close contact current is lower than 100mA; the VDC voltage must

be lower than or equal to 30VDC.

VDC: power supply output

Vo+: positive output (open collector transistor).

GND: ground collector (open collector transistor).

RS1,2,3...N

NON terminalized network.

Terminalized network

BR SX: RS485 4-wire connection: additional devices provided with RS485 port (indicated as RS1,2,3...N) are connected

in parallel. The termination of the serial port is carried out only on the last instrument of the network. The serial module is

provided with a jumper for the termination of the RS485 network as shown in the figure above.

Note: particular types of cables or plants may require an external termination. For the network connections use twisted

cable type AWG26.

Programming USC by means of PC

To USC

USC is programmable by PC by means of the UscSoft software (available on

request). The user can program all parameters of USC that will be subsequently

uploaded and set in the instrument by the RS485 network (BR SX).

Should USC be without the RS485 serial module, all programming parameters

will be uploaded and set in the instrument by the RS232 auxiliary serial connec-

tion (1) located on the side of the measuring input module using the special con-

nection cable (2) available on request, as shown in the figures on the left. It is

also possible to program the instrument using the connector (1) by means of the

HyperTerminal Windows functions of a PC.

Note: the RS232 auxiliary port IS NOT insulated from the measuring inputs.

Ordering code of the cable (2): UCOM1

To PC

Specifications are subject to change without notice USCDS0407063

USC

Dimensions

44 mm

107 mm

Dimensions of optional module in scale 1:1

Specifications are subject to change without notice USCDS040706

USC

Modules

Input modules

Output modules

BO AV

Single analogue

output 10V, 20mA

BQ LSX, BQ LSE,

BQ LSF, BQ HSX,

BQ TRX

Measuring inputs

Output modules

BO R1

Single relay output

BO R2

Dual relay output

BO R5

4-relay output

BO R4

Dual relay output +

Dual open collector

Serial port modules

Power supply modules

BR SX

RS485 Serial port

BP H

Power supply:

BP L

Power supply:

BR SY

RS232 Serial port

60 to 260V AC/DC

18 to 60V AC/DC

Specifications are subject to change without notice USCDS0407063

USC-DINHSXSYR2LTX [ETC]

相关型号：

USC-DINHSXSYR4HTX

USC-DINHSXSYR4LTX

USC-DINHSXSYR5HTX

USC-DINHSXSYR5LTX

USC-DINLSESXR1HTX

USC-DINLSESXR1LTX

USC-DINLSESXR2HTX

USC-DINLSESXR2LTX

USC-DINLSESXR4HTX

USC-DINLSESXR4LTX

USC-DINLSESXR5HTX

USC-DINLSESXR5LTX