VMP4YX [ETC]
PATCHCORD VIDEO MIDSIZE 4' YEL;型号: | VMP4YX |
厂家: | ETC |
描述: | PATCHCORD VIDEO MIDSIZE 4' YEL |
文件: | 总333页 (文件大小:18125K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
* Please visit the product pages on our website for the most up-to-date product information
ABOUT SWITCHCRAFT, INC.
CATALOG SECTIONS
Switchcraft, Inc. was established in 1946 to manufacture
jacks, plugs and switches, from its original plant located
on West Diversey Street in Chicago. The company moved
to a larger facility at 1328 North Halsted Street in 1948, and
in 1958, the operation moved to 5555 North Elston Avenue,
which is still the headquarters of the corporation.
Connectors . . . . . . . . . . . 1-78
Jacks & Plugs . . . . . . . . . 79-162
Jack Panels . . . . . . . . . . . 163-238
Switchcraft is a leading supplier of a broad line of components
for the audio/video, broadcast, telecommunication,
computer, medical, military, appliance, transportation and
instrumentation industries.
Patch Cords and
Molded Cable
Assemblies . . . . . . . . . . . 239-268
Switches . . . . . . . . . . . . . 269-318
Index by Part Number . . . 319-328
In the 185,000-square-foot Chicago facility, Switchcraft
manufactures electronic and elecromechanical compo-
nents, including:
• Jacks
• Plugs
• Connectors
• Patch Panels
• Switches
• Jackfields
• Patch Cords
• EAC Power
Receptacles
• Molded Cable Assemblies
With a basic line of over 5,000 standard products and
thousands of variations, Switchcraft is proud to offer a
limited lifetime warranty on all products.
Switchcraft markets products both domestically and
internationally through a network of manufacturers’
representatives and independent distributors.
In 1999, Switchcraft acquired the Conxall Corporation
located in Villa Park, Illinois. Conxall was founded in 1971
as a manufacturer of sealed connectors for the marine
industry. Today, the company offers a broad line of custom
cable assemblies and connectors used in marine, industrial,
sensor, communications and transportation applications.
For more information contact Conxall at (630) 834-7504, or
visit their website at www.conxall.com.
LIMITED LIFETIME WARRANTY
Switchcraft warrants all of its products to be of sound
design, good materials and workmanship at the time of
manufacture.
Switchcraft will repair or replace at its discretion any product
proven to be defective under normal use.
Visit us on the net:
www.switchcraft.com
Switchcraft’s liabilty under the terms of this warranty is limited
to the repair or replacement of defective products which
have not been damaged through accident, abuse, misuse
or unauthorized repair. Switchcraft shall in no case be liable
for special or consequential damages of any nature.
i
PHONE: 773 792-2700
* Please visit the product pages on our website for the most up-to-date product information
SL18 Male/Female Receptacles ................................................64
CONNECTORS AND RECEPTACLES
CB CONNECTORS MICROPHONE CONNECTORS,
MINI-CON MINIATURE CONNECTORS .......................................65
Q-G® XLR CONNECTORS.........................................................1-30
Q-G® Connector Part Numbering System....................................2
Professional Series Q-G® Connector Part Numbering System.......2
Q-G® Audio Connectors A, AA, AND QGP Series....................3-4
Part Numbers - Male Cord Plugs/Female Cord Plugs ..................4
Q-G® Color Flex Reliefs/Flex Relief .............................................5
AAA XLR Connectors ................................................................6-7
P(*)M Gooseneck Plug, P(*)F Microphone Plug,
HP75BNC SERIES BNC CONNECTORS ................................66-67
EAC RECEPTACLES ...............................................................68-77
RAPC322 POWER INLET SOCKET .............................................78
R(*)MZ Cord Plug, R(*)FZ Cord Plug ...........................................8
D(*)M, D(*)F and D(*)FD Receptacles ..........................................9
T(*)F and T(*)FM Cord Plug With On-Off Switch ..........................9
B(*)F Receptacle, C(*)F Receptacle, B(*)M Receptacle,
JACKS AND PLUGS
C(*)M Receptacle........................................................................10
E Series Receptacles.............................................................11-15
EH Series Receptacles ...............................................................16
PQG® Receptacles................................................................17-18
PD Series - Plastic Panel Mount ...........................................19-21
Y3F, Y3FPC, Y3FDPC and Y3MPC Receptacles........................22
F Series Receptacles ............................................................23-24
Q-G® Adapters, Accessories .....................................................25
Q-G® Wall Plate Receptacles ....................................................26
Q-G® Connector-Adapters.....................................................27-28
S*FM Audio Connector-Adapter .................................................28
Audio “Y” Adapters .....................................................................28
DMX Adapter ..............................................................................29
Q-G® Connector-Adapter Receptacles ......................................30
Z Matching Transformers, Series M(*)M, Series L(*)MN ............30
JACK SCHEMATICS ................................................................79-80
1/4" LONG FRAME TELEPHONE JACKS ...............................81-85
1/4" Jack Blocks .........................................................................86
BANTAM TYPE® JACKS ..........................................................87-90
TT-JAX® (.173") Telephone Jacks Bantam Type® ................87-88
TT-JAX® (.173") Telephone Twin Jacks Bantam Type® .............89
TT-JAX® (.173") Telephone Triple Jacks Bantam Type® ............90
RTT Series Miniature Telephone Jacks,
Right Angle, PC Mount .........................................................91-92
.177" Enclosed Jacks .................................................................93
LITTEL JAX® 2- AND 3-CONDUCTOR,
1/4" PHONE JACKS ...............................................................94-109
Hi-D Jax® 2- and 3-Conductor .............................................96-99
Spring Lock PC Terminals for Hi-D Jax® .................................100
SN Series, RA Series Right-Angle Phone Jacks ..............101-105
500 Series Jack Covers ...........................................................106
Series E (Locking) and Thick Panel Phone Jacks ...................107
1/4" Extension Jacks and 1/4" Speaker Jacks .........................108
1/4" Shielded Phone Jacks, SF-Jax®
TINI Q-G® MINIATURE CONNECTORS .................................31-37
Tini Q-G® Audio Adapters ..........................................................31
TB(*)M AND TB(*)MB Receptacle,TLP(*) Looping Plug, Straight
Female Looping Plug, Reverse Gender TQG Series .................33
TRA(*)M PC Mount Male Receptacle ........................................34
TRASM*M, TRAPC*M Series ...............................................34-36
TY(*)F and TY(*)FPC Receptacles,TYEF Escutcheons,
TQG(*)F and TQG(*)M Connector Inserts, TBA(**)
Audio Adapter .............................................................................37
Short Frame Jacks ...................................................................109
.141" MINIATURE PHONO JACKS .......................................109-111
3.5MM DUAL STEREO JACK ...............................................112-113
3.5MM SINGLE MONO AND STEREO JACKS ...................114-118
3.5MM SINGLE MONO JACKS ...................................................119
2.5MM SINGLE MONO AND STEREO JACKS ..........................120
.101" SUBMINIATURE PHONE JACKS ...............................121-122
RCA PHONO JACKS AND PHONO JACK SETS ................123-129
RIGHT ANGLE MINIATURE POWER JACKS ......................130-133
STRAIGHT MINIATURE POWER JACKS ............................134-135
VJ SERIES VIDEO JACKS ..........................................................136
MVJ SERIES VIDEO JACKS .......................................................137
HPC HIGH POWER AUDIO CONNECTORS ...........................38-40
EN3TMini WEATHERTIGHT CONNECTOR SERIES ..............41-45
2 - 8 pin Cord Connector, 9 - 18 pin Cord Connector ................43
2 - 8 pin Panel Connector, 9 - 18 pin Panel Connector .............44
2 - 8 pin Inline Connector, 2 - 8 pin Overmolded Cord
and Inline Connector ..................................................................45
DIN CONNECTORS .................................................................46-55
Plugs .....................................................................................46-48
Panel Mount Receptacles .....................................................48-50
Right Angle PC Mount Receptacles .....................................51-52
Mini-DIN Right-Angle Receptacles, Right-Angle, PC Mount
Receptacles ..........................................................................47-53
SMD Series ................................................................................54
DMD Series ................................................................................55
USB CONNECTORS ................................................................56-57
IEEE 1394 FIREWIRE CONNECTORS ...................................58-59
SLIM-LINE CONNECTORS ......................................................60-64
Cord Plugs .................................................................................60
Slim-Line Connector Part Numbering System, Cable Clamp and
Strain Relief ................................................................................61
SL40-SL41 Male/Female Cord Plugs .........................................62
SL10-SL17 Male/Female Receptacles .......................................63
MIL-TYPE 1/4" PHONE PLUGS ...........................................138-141
Littel Plug® Phone Plugs .........................................................139
MIL-TYPE 1/4" EXTENSION JACKS ...........................................142
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
ii
FAX: 773 792-2129
* Please visit the product pages on our website for the most up-to-date product information
TELEPHONE PATCH ADAPTERS ..............................................142
BANTAM TYPE MINIATURE TELEPHONE PLUGS ............143-144
TT5202000, TT5502000, TT5602000 ...............................217-218
TT-Jax® (.173") Twin Row and Three Row Jack Panels....219-220
TT-Jax® (.173") Connectorized Jackfields - Series TT,
2-wire, 4-wire, 6-wire .........................................................221-229
TT® Lamps and Jewel Assemblies ..........................................230
Longframe Switchboard Switches ............................................231
Dummy Plugs and Hole Plugs .................................................232
TT® (Bantam) Circuit Guard Plugs ..........................................233
Miniature, Dummy Plugs, Hole Plugs .......................................234
Designation Strips .............................................................235-236
Kwik-Change® Designation Strips (Double Height) .................237
X-Wide® Vertical Designation Strips ........................................238
1/4" COMMERCIAL PHONE PLUGS -
LITTEL-PLUG® PLUGS .......................................................145-147
Silent-Plug And Lug® Phone Plugs .........................................148
Audio Loudspeaker and Heavy Duty 1/4"
Commercial Phone Plugs .................................................149-150
.206" Commercial Phone Plugs ...............................................151
1/4" Miti-Plug® Audio Plugs .....................................................152
1/4" Flat Plug Phone Plugs ......................................................153
Right-Angle Phone Plugs .........................................................154
1/4" Lock-Extension Jacks And Plugs ......................................155
PATCH CORDS AND
MOLDED CABLE ASSEMBLIES
3.5MM HEAVY DUTY STEREO PLUGS .....................................156
.141" MINIATURE PHONE PLUGS .............................................157
.097" SUBMINIATURE PHONE PLUGS ......................................158
AUDIO ADAPTERS .....................................................................159
RCA PHONO PLUGS ...........................................................160-161
MINIATURE POWER PLUGS ......................................................162
MOLDED CABLE ASSEMBLIES ..........................................239-261
Design Materials and Features ................................................239
3.5MM Molded Cables .............................................................240
Power-Plug Battery Charger Plugs and Jacks .........................241
Power Plugs and Jacks Part Numbering System .....................242
EN3T MINI Weathertight Overmolded Cable Assemblies ........243
Cordette® and Cord Switch Assemblies ....................................44
Cordette® Switches .................................................................245
DIN Plugs ..........................................................................246-248
MIDI Cables ..............................................................................249
Miniature, Shielded, Molded Tini Q-G® Plugs .........................250
Molded Cable Assemblies for Multi-Pin Interconnection
Part Numbering System ...........................................................251
Standard Multi-Pin Interconnection Cables ..............................252
Micro Plug® Subminiature Phone Plugs ..................................253
Tini Plug® Miniature Phone Plugs ...........................................254
Phono Plugs and Phono Extension Jacks ...............................255
Tini-Extension® Jacks ..............................................................256
Littel Plug® Phone Plugs ..................................................256-257
Extension Jax® Phone Jacks ...................................................257
Cable Clamp Bands, “Y” Junctions ..........................................258
Part Numbering System ...........................................................259
Standard Cable Guide ..............................................................260
Cross Reference Guide ............................................................261
JACK PANELS, PATCH PANELS, PATCH KITS AND
JACKFIELDS
AUDIO PATCHBAYS .............................................................163-190
Professional Punchdown Terminal (PPT)..................................163
Front Access MTPFA/TTPFA Series..................................164-165
MTP48K Wired Audio Series .............................................166-167
TTP96K Wired Audio Series ..............................................168-169
MTPH/TTPH Harness Audio Series...................................170-173
MTPBP/TTPBP Backpanel Series .....................................174-175
EZ NORM Patchbay Series ...............................................176-177
TT96 EDAC Series.............................................................178-179
TTP96K Patchkit Series ....................................................180-181
MT48K/MT52K Patchkit Series..........................................182-183
MT48/MT52 Patchbay Series.............................................184-185
TTP96AS Patchbay Series ................................................186-187
Q-G®XLR Patchbay Series................................................188-189
HPC Patchbay Series................................................................190
AUDIO/VIDEO PATCHCORDS ............................................262- 267
1/4" Longframe Telephone Patch Cords, MIL Type 1/4" Patch
Cords ........................................................................................262
Combination Patch Cords and MIL Type
1/4" Twin Patch Cords .............................................................263
Miniature TT® Braided Patch Cords .......................................264
Miniature TT® Molded Patch Cords
RS 422 DATA PATCHBAY SERIES ......................................191-192
and Telephone Couplers ..........................................................265
Video Patch Cords ...................................................................266
Broadcast Series 3-Conductor Bantam TT Patch Cords,
Analog-AES/EBU Audio, and RS422 Patching ........................267
VIDEO PATCHBAYS .............................................................193-201
VPP Video Patchbay Series ..............................................193-195
MVP Midsize Video Patchbay Series ................................196-198
VAP Video/Audio Patchbay Series ....................................199-200
MBPK Video/Audio Patchbay Series ........................................201
SWITCHES
TELECOM TYPE JACK PANELS .........................................202-238
Long Frame (1/4")Single Row Telephone Jack Panels ....202- 203
Long Frame (1/4") Twin Row Jack Panels ........................204-205
Long Frame (1/4") Modular Twin Row Jack Panels ..........206-209
Long Frame (1/4") Modular 3 Row Jack Panels .......................210
TT-Jax® (.173") Jack Panel Series 1600, A1600,
B1600, C1600 ...................................................................211-214
Modular TT-JAX® (.173") Panels -
Blank Series TT51, TT53, TT56, TT59 .....................................215
TT Module Inserts - Series TT91, TT92 And TT93 ..................216
Modular TT-Jax® (.173") Jack Panels -Series TT5102000,
PUSHBUTTON SWITCHES
IBS Series Miniature Keyboard Switches .................................269
IBS Keyboard Switch Pushbuttons ...........................................270
US Series Uniswitch® Switches ...............................................271
BXR Series Box Switch® Switches ..........................................272
Button-Switch® Switches, Tini-Switch® Switches ...................273
Littel-Switch® Switches ............................................................274
Hi-D Switch® PC Mount Switches, DA-Switch Switches .........275
Cord-Switch® Cord Switches, Cordette® Cord Switches ........276
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
iii
PHONE: 773 792-2700
* Please visit the product pages on our website for the most up-to-date product information
Push-Lite® Switches and Indicators .................................277-281
Series PL9000 - PL® Indicators, Pushbutton/Indicator
Screens, Color Filter Snap-Insserts, Optional
Mounting Barriers, Light Divider ...............................................278
Part Numbering System ...........................................................279
Outline Dimensions ...........................................................280-281
SLIDE SWITCHES ...............................................................282-290
General Purpose Slide Switches ......................................284-287
Miniature Slide Switches ...................................................288-290
Side-Slide®/Miniature Slide Switches ......................................290
European Line Voltage Selector Switches ........................291-293
LEVER SWITCHES ..............................................................294-298
GENERAL PURPOSE STACK SWITCHES .........................299-300
MULTIPLE STATION SWITCHES .........................................301-302
Littel® Multi Switch ............................................................303-308
DW Multi-Switch ................................................................309-311
Tini® DW Multi-Switch ......................................................312-313
IBS Multi-Switch - Series IBS ...........................................314-315
Multi-Switch Pushbuttons ..................................................316-317
INDEX BY PART NUMBER ...................................................319-328
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
Q-G® CONNECTORS 1
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
Q-G® CONNECTORS
SECTIONALIZED VIEW - A3F Plug to B3M Receptacle
Field-proven Switchcraft Q-G ® (Quick-Ground) 3- through
7-contact audio connectors with ground terminal and ground
contactors are available in a wide range of plugs and
receptacles for microphones, test equipment, instrumentation,
computers, video cameras, mixing consoles, tape recorders,
PA and sound reinforcement, stereo systems and many more
applications.
MALE RECEPTACLE
Ground Terminal
FEMALE CONNECTOR
Panel
Latch Lock
Switchcraft Q-G® connectors feature a separate ground-terminal
electrically integral with connector shell. Ground continuity
between mating plugs is automatically accomplished through
exclusive “Dual Point” grounding system. Socket and pin
assemblies utilize “wedge-action” to insure firm, reliable
positioning in connector shell. Inserts are easily removable for
wiring and soldering. High-impact thermoplastic insures long
reliable insert assembly life. Female connectors have latch lock
feature to hold connectors firmly together. Plugs and receptacles
are mechanically keyed for proper mating. Q-G (*) Series 3-,
4-, 5-, 6-, and 7-pin/contact connectors offer 4-,
5-, 6-, 7-, and 8-pin contact versatility when ground-terminal is
used. Switchcraft QGP connectors; are compatible with
3- and 4-contact (Neutrik, Amphenol 91-850 and Excellite
91-450 Series, and Cannon XLR-3, XLR-4): 5-contact (Neutrik,
Cannon XLR-5 and Amphenol Excellite 91-450 Series).
Insert set screw
(Shell ground)
Ground Terminal
Pin
Cable Clamp
Strain Relief
Insert
Shell
DESIGN FEATURES
CONSTRUCTION: Sturdy, die-cast zinc with satin nickel
finish or Black-Velvet® finish to withstand hard use – even
abuse. Vel-Tone non-reflective finish on QGP connectors only.
INSERT INSULATION: High-impact, molded thermoplastic
provides high dielectric strength, and superior insulation
resistance.
Captive Design® Insert Screws
LOCKING: Latchlock on female plugs and receptacles locks
into groove in mating male connector to prevent accidental
disconnect. Manual release of latchlock is required to
separate connectors. Q-G connectors are also available with
FAS-DISCONNECT detent in place of latchlock. QGP has die-
cast latchlock.
FAS-DISCONNECT: FAS-DISCONNECT detent permits
immediate disconnect of locked connectors with a 4-pound
(1.8 kg) force. FAS-DISCONNECT connectors are not
recommended for use in situations where strong or violent
pulls on cable may occur and cause accidental disconnect.
Available on Q-G connectors only.
Insert screw engages as any conventional screw, except it is
lefthand threaded. To disassemble the connector, turn screw
counterclockwise down into insert (see illustration).
DUAL PRESSURE PLATES: A*F and A*M Series provides
secure cable lock and strain relief for all standard size cables.
FLEX RELIEF: TPR cable flex relief bushings on cord plugs
are keyed to shell. Standard bushing opening accepts cables
from .21" to .3" diameter Bushings with other openings
accommodate cables from .105" to .205" diameter and from
.3" to .328" diameter.
Insert assembly is now readily removed from shell. Note
“Ground Terminal” area – large soldering cups make cable
installation fast and easy. Unitized 1-piece insert eliminates
possible loss of latchlock and spring.
CONTACTS: Q-G female connectors are copper alloy,
silver-plated, tarnish-resistant; male contacts are copper alloy,
silver-plated, tarnish-resistant. Gold-plated female contacts
are copper alloy. Male contacts are gold-plated.
WIRING: Large, unique design solder cups make wiring fast
and easy. Certain receptacles are also available with PC
terminals for use with printed circuit boards.
To reassemble, replace insert assembly into shell, align insert
screw under hole in shell and secure insert by turning insert
screw clockwise. This “wedges” insert against interior of shell
providing a rigid connector assembly and positive electrical
continuity between ground terminal and shell (see illustration).
Grounding and Shielding
Tightening the insert screw establishes continuity between
ground terminal, ground contactors and connector housing.
Upon engagement with a mating plug or receptacle, the
ground circuit is automatically connected to the mating shell
through the ground contactor. Any pin or contact can be
grounded by “jumping” it to the ground terminal. Contact
1 engages before all other contacts and disengages after all
other contacts.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
QG® PART NUMBERING SYSTEM
2
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Q-G® CONNECTOR PART NUMBERING
Number of
Series
Contacts
Gender
Options
A
CORD PLUG WITH SCREW CABLE CLAMP
CORD PLUG WITH CRIMP CABLE CLAMP
CORD PLUG WITH TWIST ON HANDLE
3-7
M MALE
D
B
FAS-DISCONNECT (FEMALE CONNECTORS)
BLACK EPOXY FINISH
AA
AAA
F FEMALE
FM BOTH
(S SERIES)
B
C
D
FRONT PANEL MOUNT USING NUT
FRONT PANEL MOUNT - CIRCULAR
FRONT PANEL MOUNT - RECTANGULAR
ST
RA
M
STRAIGHT PC TAILS
RIGHT ANGLE PC TAILS
MOMENTARY SWITCH ACTION
(T SERIES ONLY)
E
G
H
J
MODULAR FRONT PANEL MOUNT
WALL PLATE - 1 B SERIES MALE
PC
N
PC TERMINALS
(Y SERIES ONLY)
KNURLED COUPLING NUT (L SERIES ONLY)
FLEX RELIEF FOR .250" TO .328" CABLE O.D.
SEE NOTE 1.
WALL PLATE - 2 B SERIES MALES
WALL PLATE - 1 D SERIES FEMALE
WALL PLATE - 2 D SERIES FEMALE
MICROPHONE ADAPTER - INTERNAL THREAD
L
S
K
L
AU
H
GOLD CONTACTS
HOUSING ONLY
M
N
MICROPHONE ADAPTER - EXTERNAL THREAD
CAP PLUG
OPTIONS SHOWN IN ORDER OF APPEARANCE
SCREWLESS STRAIN RELIEF
Z
P
GOOSENECK MOUNT
QG
R
CONNECTOR INSERT
RIGHT-ANGLE CORD PLUG
MALE/FEMALE BARREL ADAPTER
CORD PLUG WITH ON-OFF SWITCH
RIGHT-ANGLE PANEL MOUNT
REAR PANEL MOUNT
S
T
W
Y
NOTE 1: S HAS DIFFERENT DESIGNATIONS DEPENDING ON THE SERIES.
FOR A, AA, AND T SERIES: SMALL FLEX RELIEF FOR .105" TO .205" CABLE OUTSIDE DIAMETER
FOR B, C, AND D SERIES: SANDED FRONT FACE FINISH
FOR G, H, J, AND K SERIES: STAINLESS STEEL WALL PLATE (STANDARD)
FOR N SERIES: SHORTING WIRING INSTALLED
NOTE 2: J, K AND T SERIES AVAILABLE IN FEMALE GENDER ONLY.
G, H, L, M, N, AND W SERIES AVAILABLE IN MALE GENDER ONLY.
PROFESSIONAL SERIES Q-G® CONNECTOR PART NUMBERING SYSTEM
Number Of
Series
Contacts
Model
PROFESSIONAL SERIES
3
22
23
FEMALE CORD PLUGS
MALE CORD PLUGS
PROFESSIONAL SERIES CORD PLUG
WITH CRIMP CABLE CLAMP
QGP
AQGP
62
63
RECTANGULAR FEMALE PANEL MOUNT
RECTANGULAR MALE PANEL MOUNT
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
Q-G® CORD PLUG CONNECTOR – A, AA AND QGP SERIES 3
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
Q-G ® CORD PLUG CONNECTORS (continued)
Q-G® AUDIO CONNECTORS A, AA, AND QGP SERIES
Sleek, stream-
lined shell
Solid pins,
silver plated performance
for reliability socket contacts
Bifurcated high
Rugged cable
clamp to ground
(no screws)
Cable
clamp
Durable
metal latch
lock
Rugged
metal shell
Standard nickel
or black finish
Easy change
flex relief for
color coding
“No screws” Solder terminals
Easy change
flex relief for
color coding
Light green, high
“Dual-point
performance insert shell grounding”
“No screws”
retention
system
retention
system
rotated for easy
access & soldering
QGP connectors (3 contacts only) feature Vel-Tone®
non-reflective finish, gray TPR flex relief and plated
pins/contacts for the most demanding applications.
Preferred by audio professionals the world over, Switchcraft®
QG® connectors feature unsurpassed durability and a choice
of finishes and contact platings. Features include:
• High performance inserts in traditional Switchcraft® green
or black.
MATERIAL
Q-G CONNECTORS (A AND AA SERIES)
Shell: Die-cast zinc. Satin nickel finish, black velvet.
Insert Insulation: Molded thermoplastic.
Socket Contacts: Silver-plated copper alloy tarnish-resistant;
bifurcated on 3-contact type. Gold is available
Pin Contacts: Silver-plated copper alloy. Resists tarnishing,
and provide excellent electrical conductivity. Gold is available.
Latchlock: High-strength die-cast zinc.
• Solder terminals rotated for easier access and soldering.
• All metal housing.
Latch Release: Steel, nickel-plated.
AA Series Only
Latch Detent: Formed stainless steel.
• Rugged 1-piece cable clamp to relieve pulling and twisting
stresses on terminations.
Insert Screw: Stainless steel.
Flex Relief: TPR (thermoplastic rubber).
• No Screws flex relief retention system.
• Integral bump shell grounding system.
QGP CONNECTORS
Shell: Die-cast zinc, non-reflective gray Vel-Tone® finish.
Socket Contacts: Gold-plated copper alloy
Pin Contact: Gold-plated copper alloy
SPECIFICATIONS
ELECTRICAL
Contact Resistance: 50 milliohm maximum, per pole.
Current Rating: 3 pole – 15A, 4 pole - 10A, 5 and 6
pole – 7.5A, 7 pole – 5A @ 125VAC.
Insulation Resistance: 1,000 MΩ, minimum.
Dielectric Withstanding Voltage: 1,000 V (rms).
Capacitance: 2 pF between pins and 4 pF between pins
and shell, maximum (AA3M and AA3F).
MECHANICAL
Insertion/Withdrawal Forces: 7 pound maximum,
5 pound nominal, insertion; 7 pound maximum,
5 pound nominal, withdrawal.
Wire Size: #12 wire gauge solid; #14 wire gauge stranded
(3 contact). #14 wire gauge solid; #16 wire gauge stranded
(4 contact). #16 wire gauge solid; #18 wire gauge stranded
(5 and 6 contact). #18 wire gauge solid; #20 stranded
(7 contact). (Q-G and QGP).
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
QG® CORD PLUGS – A AND QGP SERIES
4
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Q-G® CORD PLUG CONNECTORS (continued)
AA(*)F CORD PLUG
AA(*)FD CORD PLUG
AA(*)M CORD PLUG
PART NUMBERS - MALE CORD PLUGS
PART NUMBERS - FEMALE CORD PLUGS
Advanced Q-G® Cord Plugs, Series AA(*)F and AQGP
AA3F AA3FB ◊AA3FBAU ◊AA3FD ◊AA3FL ◊AQGP322
Advanced Q-G® Cord Plugs, Series AA(*)M and AQGP
AA3M
AA3MB ◊AA3MBAU ◊AA3ML
◊AQGP323
3
4
5
6
7
3
3
4
5
6
7
◊AA4M
—
—
—
—
—
◊AA4ML
◊AA5ML
◊AA6ML
◊AA7ML
—
—
—
—
—
—
—
—
—
—
—
AA3FLD
—
—
—
—
—
◊AA5M ◊AA5MB
◊AA4F ◊AA4FB
◊AA5F ◊AA5FB
◊AA6F ◊AA6FB
◊AA7F ◊AA7FB
◊AA4FD ◊AA4FL
◊AA5FD ◊AA5FL
◊AA6FD ◊AA6FL
◊AA7FD ◊AA7FL
◊AA6M
◊AA7M
—
—
All above part numbers have black flex relief installed. Contact Switchcraft for
color flex relief.
◊ Available on special order only; contact Switchcraft for price and delivery.
A(*)F CORD PLUG
A(*)FD CORD PLUG
A(*)M CORD PLUG
*Number of insert contacts or pins must be specified to complete part number.
Straight female cord plug with
FAS-DIS-CONNECT detent.
Straight male cord plug.
Straight female cord plug with
standard latchlock. Available in
3-7 pin versions.
PART NUMBERS - FEMALE CORD PLUGS
PART NUMBERS - MALE CORD PLUGS
Standard Q-G® Cord Plugs, Series A(*)F and QGP
Standard Q-G® Cord Plugs, Series A(*)M and QGP
Satin
Nickel
Fas-
Dis-
Large
Flex
Satin
Nickel
Finish
Large
Flex
Relief 2
Black Finish
Silver 1 Gold 1
Insert
Black Finish
Insert
Finish
Connect Relief 2 QGP Series
Silver 1
Gold 1
QGP Series
Contacts
nContacts
A3M
A3MS 3
A4M
A3MB
—
A3MBAU
—
A3ML
—
QGP323
3
3
4
5
6
7
A3F
A3FS3
A4F
A3FB
A3FBAU
—
◊A3FD
—
A3FL
—
QGP322
3
3
4
5
6
7
—
—
—
—
—
—
—
—
—
—
—
A4MB
A5MB
—
A4MBAU
A5MBAU
A6MBAU
A7MBAU
A4ML
◊A5ML
—
A4FB
A5FB
A6FB
A7FB
A4FBAU
A5FBAU
A6FBAU
A7FBAU
◊A4FD
A4FL
A5M
A5F
◊A5FD ◊A5FL
A6M
A6F
—
—
—
—
A7M
—
—
A7F
All above part numbers have black flex relief installed. Contact Switchcraft for
color flex relief.
1. Contact plating.
2. Accepts cables from .25" (6.35 mm) to .328" (8.33 mm) diameter
3. Accepts cables from .105" (2.7 mm) to .205" (5.2 mm)
◊ Available on special order only; contact Switchcraft for price and delivery.
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
Q-G® FLEX RELIEF 5
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
Q-G® CONNECTORS (continued)
Q-G® COLOR FLEX RELIEFS
Part Numbers
3 Pins/Contacts
Flex
Relief
Color
Black
Brown
Red
Orange
Yellow
Green
Blue
Flex
Relief
Only
Rainbow color cable strain relief bushings can be specified
to match or complement equipment decors or code individual
or grouped connections for quick recognition. On special
order, tan, pink and dark blue are available. Bushings
accommodate cables from .21" to .30" diameter.
Prepackaged, 25 per bag.
Female
Male
A3F
A3M
SR00
SR01
SR02
SR03
SR04
SR05
SR06
SR07
SR08
SR09
◊A3F01
◊A3F02
◊A3F03
◊A3F04
◊A3F05
◊A3F06
◊A3F07
◊A3F08
◊A3F09
◊A3M01
◊A3M02
◊A3M03
◊A3M04
◊A3M05
◊A3M06
◊A3M07
◊A3M08
◊A3M09
Violet
Gray
White
◊ Special order only; contact Switchcraft for price and delivery.
Q-G® FLEX RELIEF
Small Cables
Flex relief bushing with small opening accommodates
cables from .105" (2.7 mm) to .205" (5.2 mm). Standard
size bushing accepts cables from .210" (5.3 mm) to .300"
(7.6 mm) outside diameter. Bushing with large opening
accommodates cables from .300" (7.6 mm) to .328" (8.3
mm). Larger cables are often needed for multiple-conductor
instrumentation. Code letter “L” in last or second to last digit
in part number indicates plug with large bushing. Code
letter “S” in last or second to last digit in part number
indicates plug with smaller bushing.
.105 to .205
(2.7)
(5.2)
Standard Cables
.210 to .300
SWITCHCRAFT PART NUMBER ◊K255
Package of 100 cable clamp screws.
(5.3)
(7.6)
Large Cables
◊ Special order only; contact Switchcraft for price and delivery.
.300 to .328
(7.6)
(8.3)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
AAA CONNECTORS
6
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
AAA CONNECTORS
AAA SERIES Q-G® TWIST CONNECTOR
Switchcraft introduces the AAA Series or Q-G® Twist XLR
FEATURES AND BENEFITS
connectors.The Q-G® Twist Series is available in male or female cord • Only two pieces to assemble
plug, 3 through 7 pins or contacts.The unique features are the easy • Easy twist on handle reduces assembly time
twist on combination handle/strain relief, and the reduced number of • Rugged die-cast metal handle
parts to assemble. With the insert built into the front shell, and the • Accepts cable OD’s (.100" – .285")
strain relief preloaded into the handle, the end user has only two • Black finish available
parts to assemble – slide the handle onto the cable, solder the • Gold-plated pins/contacts available
terminations, and twist on the handle. As the handle is tightened, the • Lower cost plastic handle version available
strain relief tightens around the outer jacket of the cable. A ramp on
APPLICATIONS
• Audio
• Medical
• Instrumentation
the strain relief keeps it from rotating around the cable jacket and
twisting the cable. The strain relief was designed to accommodate
the most popular cable sizes.A rugged die-cast metal handle insures
optimum protection, and increases signal shielding. Popular options
• Process Controls
include black and gold finishes, as well as a lower cost plastic
handle version.
4 Contact
SPECIFICATIONS
#14 wire gauge solid
5 & 6 Contact
#16 wire gauge solid
7 Contact
#18 wire gauge solid
MATERIAL
#16 wire gauge stranded
#18 wire gauge stranded
#20 wire gauge stranded
ELECTRICAL
Contact Resistance: 50 milliohm maximum, per pole.
Current Rating @ 125VAC:
3 pole – 15A
4 pole –10A
5 & 6 pole – 7.5A
Shell: Die-Cast zinc with nickel finish or black chrome.
Handle: Die cast with nickel finish or black chrome.
Also black thermoplastic handle available.
O Ring: TPR (Thermoplastic rubber).
Insert Insulation: Molded thermoplastic.
7 pole – 5A
Insulation Resistance: 1,000 MΩ, minimum.
Dielectric Withstanding Voltage: 1,000 V (rms)
Capacitance: ≤3 pF between pins and ≤6 pF
between pins and shell, maximum
Socket Contacts: Silver plated copper alloy tarnish resistant;
bifurcated on 3 and 4 contact types. Gold is available.
Pin Contacts: Silver plated copper alloy. Resists tarnishing,
and provides excellent electrical conductivity. Gold is available.
Latch lock: High strength die cast zinc.
MECHANICAL
Insertion/Withdrawal Forces: 10 lbs. maximum,
8 lbs. nominal / 7 lbs. maximum, 5 pounds nominal.
Wire Size:
3 Contact
Strain Relief: TPR
Flex Relief: TPR (Thermoplastic rubber)
#12 wire gauge solid
#14 wire gauge stranded
CONNECTOR PART NUMBER SCHEME
Series Pins/Contacts
Gender
Handle Material
Housing
Finish
Terminal
Finish
Z
AAA
3-7 pins
3-7 pins
F: Female
M: Male
P: Plastic
Blank: Metal
B: Black
Blank: Nickel
AU: Gold
Blank: Silver
New Strain Relief
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
AAA CONNECTORS
7
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
AAA CONNECTORS (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
Q-G® CORD PLUG CONNECTORS
8
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Q-G® CONNECTORS (continued)
R(*)FZ CORD PLUG
Right angle, female cord mount plug, latching. New style
incorporates an insert that can rotate every 45° for added
flexibility in tight applications. Also utilizes the new strain relief
system with twist-on handle.
R(*)MZ CORD PLUG
Right angle, male cord mount plug, latching. New style
incorporates an insert that can be rotated every 45° for added
flexibility in tight applications. Also utilizes the new strain relief
system with twist-on handle.
Part Number
Insert Pins
Part Number Insert Contacts
R3MZ
R4MZ
R5MZ
R6MZ
R7MZ
3
4
5
6
7
R3FZ
R4FZ
R5FZ
R6FZ
R7FZ
3
4
5
6
7
Accepts cable O.D.'s .100"–.285"
For black finish, add "B" suffix.
Accepts cable O.D.'s .100"–.285"
For black finish, add "B" suffix.
For black/gold finish, add "BAU" suffix.
For black/gold finish, add "BAU" suffix.
P(*)F MICROPHONE PLUG
P(*)M GOOSENECK PLUG
Female microphone plug for gooseneck mount. Fits standard
gooseneck with external 5/8-27 thread. Microphone plugs
directly into connector. (Gooseneck not supplied.)
Male plug for gooseneck mount. Fits standard gooseneck with
internal 5/8-27 thread. Use on gooseneck with microphone
plug on opposite end. Plugs directly into female receptacle.
(Gooseneck not supplied.)
Part Number 1
Insert Contacts
◊P3F
◊P4F
◊P5F
3
4
5
1. Satin Nickel Finish. (standard)
2. Large flex relief accepts cable from .25" to .328" diameter. (optional)
3. Gold-plated contacts. (optional)
Part Number 1
Insert Pins
◊P3M
◊P4M
◊P5M
3
4
5
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
Q-G® CORD PLUG CONNECTORS AND RECEPTACLES
9
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
Q-G® CORD PLUG CONNECTORS AND RECEPTACLES
T(*)F AND T(*)FM CORD PLUG WITH ON-OFF SWITCH
Part Number
Part Number
Insert Contacts
◊T3F
◊T3FM
◊T4F
◊T3FL
◊T3FLM
◊T4FL
3
3
4
4
◊T4FM
◊T4FLM
T(*)F Straight female cord plug with DPDT (2-C) locking
on-off switch; standard latchlock.
T(*)FM Straight female cord plug with SPDT (1-C)
momentary on-off switch; standard latchlock.
Slide switches rated 500 mA, 125V (AC or DC). Mounting
screws are supplied.
D(*)M, D(*)F AND D(*)FD RECEPTACLES
Studio quality black and gold Q-G® receptacle with black
housing and gold contacts is designed for low/stable contact
resistance and withstands corrosion where highest quality is
required for recording and broadcast studio equipment,
consoles, and other applications.
Nickel
Finish
Black Finish
Silver
Gold
Detent QGP Series1 Pins
D3M
D4M
D5M
D6M
D7M
D3F
D4F
D5F
D6F
D7F
D3MB
D4MB
D5MB
D6MB
D7MB
D3FB
D4FB
D5FB
D6FB
D7FB
D3MBAU
D4MBAU
D5MBAU
D6MBAU
D7MBAU
D3FBAU
D4FBAU ◊D3FDB
D5FBAU
D6FBAU ◊D6FDB
D7FBAU
—
—
QGP363
3
4
5
6
7
3
4
5
6
7
—
—
—
D(*)M SERIES – Male receptacle for panel or chassis
mounting. Special rectangular flange permits close spacing on
crowded panels, has two .136" (3.45mm) diameter
countersunk holes for #5-40 flat head mounting screws (not
supplied). Mounts from front of panel or chassis in .766"
(19.45) diameter hole. Satin nickel finish (Series D*M) or black
finish (Series D*MB, or D*MBAU).
—
—
—
D3FD
—
QGP362
—
—
—
—
—
—
D(*)F SERIES – Female receptacle for panel or chassis
mounting. Flange has two .136" (3.45 mm) diameter
countersunk holes for #5-40 flat head mounting screws (not
supplied). Mounts from front of panel or chassis in .953" (24.21
mm) diameter hole. Series D(*)F has standard latchlock; Series
D(*)FD has FAS-DISCONNECT detent. Satin nickel finish
(Series D*F and D*FD) and “Black-Velvet” finish (Series
D*FBAU).
* Number of insert contact or pins must be specified to complete part number.
◊ Available on special order only; contact Switchcraft for price and delivery.
1 Non-reflective gray finish, gold-plated pins.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
Q-G® RECEPTACLES
10
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Q-G® RECEPTACLES (continued)
B(*)F RECEPTACLE
B(*)M RECEPTACLE
Panel-mount female receptacle. Mounts with spanner nut
from front of panels up to .4375" (11.11 mm) thick. Slot in
threaded part of housing permits non-turn mounting.
Requires 1.25" (31.75 mm) diameter minimum mounting
hole. Spanner nut is die-cast zinc with satin nickel finish
(Series B*F) or black finish (Series B*FB).
Panel-mount male receptacle. Mounts with locknut from front of
panels up to .250" (6.35 mm) thick. Requires .812" (20.64 mm)
diameter mounting hole. For non-turning mounting, can be keyed
to “D” shaped panel hole, or S3519 mounting adapter can be used.
Satin nickel finish (Series B*M) or black finish (Series B*MB).
Part No.1 Part No.2 Insert Pins
Part No.1 Part No. 2 Insert Contacts
B3M
B4M
B5M
B6M
B7M
B3MB
—
—
—
—
3
4
5
6
7
B3F
B4F
B5F
B6F
B7F
B3FB
—
—
—
—
3
4
5
6
7
C(*)F RECEPTACLE
C(*)M RECEPTACLE
Female receptacle for panel or chassis mounting. Flange has
three .140" (3.57 mm) diameter holes for #5-40 mounting
screws (not supplied). Mounts from front of panel or chassis
in 0.953" (24.21 mm) diameter hole.
Male receptacle for panel or chassis mounting. Flange has three
.140" (3.57 mm) diameter holes for #5-40 mounting screws (not
supplied). Mounts from front of panel or chassis in .766" (19.45
mm) diameter hole.
Part No.1 Part No. 5
Insert Contacts
Part No. 1 Part No.5 Insert Pins
C3F
C4F
C5F
C6F
C7F
◊QGP326
3
4
5
6
7
C3M
C4M
C5M
C6M
C7M
◊QGP327
3
4
5
6
7
—
—
—
—
—
—
—
—
◊ Special order only. Contact Switchcraft.
1. Satin nickel finish. (standard) 2. “Black-Velvet” finish. (optional) 3. Gold-plated contacts. (optional) 4. Fas-disconnect detent. (optional)
5. Non-reflective gray finish, gold-plated pins. (standard)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
E SERIES Q-G® RECEPTACLES
11
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
E SERIES RECEPTACLES
E Series
Receptacles
Conical Spring
Solder Terminals
Straight PC
Terminals
Solder cup
Right Angle
PC Terminals
E Series Q-G® Receptacles are available with quick release
inserts. Quick insert release is accomplished by turning
screw lock from front of insert. Insert can then be removed
from the rear. For PC board applications, insert can be
removed/assembled to the housing while soldered to
the PC board.
E Series receptacles can be specified as complete assemblies,
or as separate inserts and housings. Stocking separate
inserts and housings offer considerable cost and time sav-
ings by minimizing inventory and maximizing configuration
possibilities.
FEATURES
3. Right-angle PC terminals - direct termination to PC
board at a right-angle. Housing mounts to panel.
4. SC - Solder cup
• Replaces Neutrik D Series
• 3-pin contact; male and female types
• Both male and female fit in same panel cutout
• Choice of 4 terminations; solder cups, conical springs,
straight or right angle PC terminals.
• Inserts and housings can be specified separately
• Quick release inserts for ease of removal
• Locking receptacles
• Protected ground clip minimizes scooping damage
• Insert lock detent resists disassembly from shock or
vibration during normal handling and transportation
• Silver and gold-plated contacts available
• Rugged metal shells; black or satin nickel finishes
• Through-the-shell ground connection and all-metal
shells for greater shielding effectiveness
• Compatible with Switchcraft Q-G ®, QGP and other
connectors with similar configurations
SPECIFICATIONS
ELECTRICAL
Contact Resistance: 50 milliohms maximum, per pole.
Current Rating: 15A
Insulation Resistance: 2 X 106 MΩ
Dielectric Resistance: 1,000 V rms
Capacitance: 10 pF
MECHANICAL
Insertion/Withdrawal Forces: 7 pounds maximum/
5 pounds nominal insertion; 7 pounds maximum/
5 pounds nominal withdrawal.
Life: 10,000 operations (minimum).
ENVIRONMENTAL
Thermal Range: -55° C to +85° C
Humidity: Meets MIL-STD-202F, method 106E.
Thermal Shock: Meets MIL-STD-202F, method 107D.
Salt Spray: Meets MIL-STD-202F, method 101D.
QUICK RELEASE INSERT
In two simple steps, inserts can be released while
housing stays fastened to the panel.
1. With a small screwdriver, twist insert locking screw
from front of insert.
2. Remove insert from the rear of the housing.
MATERIAL
Shells: Die-cast; satin-nickel or Black Velvet.
Inserts: Glass-filled thermoplastic.
Socket Contacts: Copper alloy, silver- or gold-plated.
Pin Contacts: Copper alloy, silver- or gold-plated.
Latch Release: Steel, nickel-plated.
Insert Locking Cam: Die-cast zinc.
TERMINALS
Four terminations are available on E Series receptacles:
1. Conical Spring Solder terminals – conical spring on
each pin holds wire in place providing constant pressure
during soldering process. This effectively acts as a third
hand, assuring a high quality solder termination.
Housing mounts to panel.
2. Straight PC terminals – direct termination to PC
board. Housing mounts to panel.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
12 E SERIES PART NUMBERING SYSTEM
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
E SERIES PART NUMBERING SYSTEM
CONNECTOR PART NUMBER SCHEME
Series Pins/
Contacts
Gender Fas-disconnect
Option
Termination
Style
Housing
Finish
Terminal
Finish
Mounting Hole
Options
E
3-5 pins F:Female D: Fas-disconnect ST: Straight PC terminals B: Black
AU: Gold
M3:M3 x 0.5 thread
M: Male Blank: Standard
locking
RA: Right angle PCterminals Blank: Nickel Blank: Silver 440: #4-40 thread
SC: Solder cups
Blank: Counter-
sunk hole
Blank: Conical springs*
HOUSING ONLY PART NUMBER SCHEME
Series Pins/
Contacts
Housing
Finish
B: Black
Mounting Hole
Options
M3: M3 x 0.5 thread
E
F: Female
M: Male
Blank: Nickel 440: #4-40 thread
Blank: Counter-sunk hole
INSERT ONLY PART NUMBER SCHEME
Series Pins/
Contacts
3-5 pins
Gender
Fas-disconnect
Option
D: Fas-disconnect
Blank: Standard locking
Termination
Style
ST: Straight PC terminals
RA: Right angle PC terminals
SC: Solder cups
Housing
Finish
Terminal
Finish
AU: Gold
Blank: Silver
E
F: Female
M: Male
Blank: Conical springs*
*3-pin only
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
E SERIES 13
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
E SERIES
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
14 E SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
E SERIES (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
E SERIES
15
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
E SERIES (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
16 EH SERIES RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
EH SERIES RECEPTACLES
The EH Series consist of different styles of popular connectors in
our E Series housing. This allows the end user to punch one single
hole size and populate wall plates, gang assemblies with different
types of connectors. Connector styles include BNC feed-throughs,
RCA feed-throughs, USB feed-throughs, IEEE 1394 Firewire
feed-throughs, BNC to solder cup, and RCA to BNC.
EHBNC2
FEATURES
• Utilizes same panel cut-out as E Series QG connectors
• Rugged metal shells
• Available with a wide variety of popular feed-through connectors
EHRCA2
EHBNC2
EHRCA2
EHBNCSC
EHRCABNC
Part Number
EHBNC2
Description
BNC to BNC
EHBNCSC
EHRCA2
BNC to solder cup
RCA to RCA
EHRCABNC
EHUSB2
RCA to BNC
USB to USB
EH13942
EHCAT62
IEEE1394 to IEEE1394
Cat6 to Cat6
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
PQG® RECEPTACLES 17
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PQG® RECEPTACLES
PQG3FRA112
PQG3MRA112
PQG3FST112
PQG3MST112
Q-G® 3 pin/contact PC receptacles offer economy, reliability
and performance in amplifiers, audio mixing boards, and
other outboard gear. Choose receptacles with just the right
combination of standard and optional bonus features to tailor
the PQG series to your exact needs.
SPECIFICATIONS
Housing: Black, glass-filled thermoplastic, UL 94V-0.
Flange mounting holes are .128 inch diameter
Socket Contacts: Copper alloy, electrotinned.
Pin Contacts: Copper alloy, electrotinned.
Latch Release: Steel, nickel-plated.
Mounting Plate: Copper alloy.
STANDARD FEATURES
Shell-to-Ground Terminals: Copper alloy, electrotinned.
Latches: Copper alloy, nickel-plated.
• UL 94V-0 plastic materials.
• Circuit #1 “makes” first and “breaks” last during
connect/disconnect.
• Positive mechanical polarization.
• Minimum PC board space required.
• Integral PC board locating posts.
• Mating/unmating cycles in excess of 10,000.
• Mates with Switchcraft Q-G and other compatible
connectors.
Insertion/Withdrawal Forces: 2 pound (nominal).
Contact Resistance: .05 ohms per pole (maximum).
Dielectric Withstanding Voltage: 1,000 V rms for 1 minute.
Insulation Resistance: 104 MΩ @ 500 V DC.
Current Capacity: 10A maximum (carry only).
Operating Temperature: -30°F to 185°F (-34°C to 85°C).
Mechanical Life: 10,000 cycles @ 10 cpm.
OPTIONAL FEATURES
• Positive latch lock or FasDisconnect (female only).
• Shell-to-ground terminal.
• Mounting Plates:
A. Backup Mounting Plate with two, M3 x 0.5 threaded
holes for faster, more rugged mounting to equipment
panel/chassis.
B. “Tri-Mounting” Plate...plus two bifurcated pcb
retainers with snap-in terminals which perform
three valuable functions:
1. Provide ground connection from panel to PCB.
2. Hold connector securely to PCB during wave-soldering.
3. Add strength between panel/chassis and PCB during
soldering by “wicking” solder through the PCB and up
sides of retainers to assure continuity.
C. Two panel grounds are integral with mounting plate.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
PQG® SERIES PART NUMBERING SYSTEM
18
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
PQG® SERIES PART NUMBERING SYSTEM
3
P
Q
G
SERIES
PQG-
PINS/
CONTACTS
GENDER
PC
LATCHING
GROUND
TERMINAL
MOUNTING PLATE
0 - None
1 - Plate with two,
M3 x 0.5 threaded
holes
2 - Plate with two,
M3 x 0.5 threaded
holes, panel grounds
and PCB retainers
TERMINALS
F - Female
M - Male
0 - None
1 - Latch Lock
2 - Fas-
RA - Right Angle,
0 - None
1 - Installed
Composite QG
3
Bottom Exit
Disconnect
(female
only)
ST - Straight
Rear Exit
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
Q-G® AUDIO RECEPTACLES FOR PC/PANEL MOUNT 19
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
Q-G® AUDIO RECEPTACLES FOR PC/PANEL MOUNT
PD SERIES - PLASTIC PANEL MOUNT
NEW
Bifurcated
PCB Terminals
PD3FS2
PD3MS1
PD3FRML1
PD3MRML1
PD3FRL1
PD3FS2
PD3FRA1
Bifurcated
PCB Terminals
Switchcraft offers the PD Series (plastic panel mount) audio
connectors with a wide variety of 3-pin/contact, male and
female types and many terminals for combined PC/panel
mount. Female types offer larger contact area for higher ratings
and longer life. Panel mounting may be at users option, either
front or rear. New PD series connectors mate with Switchcraft
Q-G and other compatible types.
SPECIFICATIONS
Housing: Black molded thermoplastic, glass-filled.
Ground Pin: Copper alloy.
Stamped Terminals/Contacts: Copper alloy, electrotinned.
Screw Machine Terminals/Pins: Copper alloy, silver-plated.
BIFURCATED PC TERMINALS
Bifurcation configuration for PC terminals on selected
connectors offers these advantages.
1. Provides convenient snap-in retention for mounting.
2. Holds connector securely to PCB during wavesoldering.
3. Adds strength to all terminal connections by solder
“wicking” through PCB and up sides of terminals.
PD SERIES FEATURES
• 3 pins/contacts
• Male and female
• Straight and right-angle terminals
• PC or PC/panel mount
• Front or rear panel mount
• Special PC/solder terminal type with exits at 0° (down,
90° (right), 180° (top), and 270° (left)
• Rugged molded black glass-filled thermoplastic housings.
BIFURCATED HOLD-DOWN FEATURE
FOR ALL PC TERMINALS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
20 PD SERIES PART NUMBERING SYSTEM
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
PD SERIES PART NUMBERING SYSTEM
P
D
3
SERIES
PD
PINS/
CONTACTS
GENDER
GENDER
MALE
HOUSING
TERMINALS
F - Female
M - Male
1 - Front Mount
.11" (2.8 mm)
FEMALE
Blank=
Silver
RA - Right-angle, RML - Right-angle,
diameter flange
mounting holes
2 - Rear Mount
.091" (2.3 mm)
diameter flange
mounting holes
3 - Front Mount
.126" (3.2 mm)
diameter flange
mounting holes
Bottom Exit
RL - Right-angle,
Left exit
Bottom Exit,
Long Screw
Mach. Term.
terminals
AU=
Gold
terminals
RR - Right-angle, RMS - Right-angle,
Right Exit
RU - Right-angle,
Top Exit
RML - Right-angle,
Bottom Exit,
Bottom Exit,
Short Screw
Mach. Term.
- Straight,
S
Rear Exit
Long Screw SC - Solder Cup
Mach. Term.
RMS - Right-angle,
Bottom Exit,
Short Screw
Mach. Term.
- Straight,
Note: New solder cup
option shown.
S
Rear Exit
SC - Solder Cup
Bifurcated
PCB Terminals
Bifurcated
PCB Terminals
PD3MS1
3-pin male,
PD3MRML2
3-pin male, right
PD3FRL1
3-contact female,
PD3FRA1
3-contact female,
straight (rear exit)
PC terminals.
Front mount.
angle (bottom exit)
long screw machine
terminals. Panel
mount holes not
countersunk.
right-angle (left exit)
PC/solder terminals.
Ground lug. Front
panel mount.
right-angle (bottom
exit) PC/solder
terminals. Ground
lug. Front panel
mount.
RECOMMENDED PC BOARD
LAYOUT (Component Side)
RECOMMENDED PC
BOARD LAYOUT
(Component Side)
Numbers PD3FS1, 2, and 3 (Typical)
Numbers PD3FRA1, 2, and 3; PD3FRL1, 2, and 3;
PD3FRR1, 2 and 3; PD3FRU1, 2 and 3 (Typical)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
PD SERIES 21
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PD SERIES (continued)
RECOMMENDED PC
BOARD LAYOUT
RECOMMENDED PC
BOARD LAYOUT
(Component Side)
(Component Side)
Numbers PD3FRMS1, 2, and 3 (Typical)
Numbers PD3FRML1, 2, and 3 (Typical)
RECOMMENDED PC
RECOMMENDED PC
BOARD LAYOUT
BOARD LAYOUT
(Component Side)
(Component Side)
Numbers PD3MRML1, 2, and 3 (Typical)
Numbers PD3MRMS1, 2, and 3 (Typical)
RECOMMENDED PC
BOARD LAYOUT
(Component Side)
Numbers PD3MS1, 2, and 3 (Typical)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
22 Q-G® RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Q-G ® RECEPTACLES
SERIES Y(*)F,Y(3)FPC,Y(*)FD,Y(3)FDPC AND Y(3)MPC RECEPTACLES
Y3MPC
Y3FPC
Series Y(*)MPC. Male receptacle for panel or chassis
mounting escutcheon. PC terminals and standoffs. Rear of
panel mount in .750 inch diameter hole. Maximum panel
thickness: 25 inches (6.35 mm); .156 inches (3.96 mm) ifYEM
escutcheon is used.
RECEPTACLES
Part Numbers
Female
Female
Insert
Contacts
Part Number Insert
Latchlock†
Detent†
Male†
Pins
Y3F
Y3FD
3
Y3MPC
3
Series Y(*)FPC. Female receptacle for panel or chassis
mounting. PC Terminal and standoffs. Rear of panel mount in
.875 inch (22.22 mm) diameter hole.
†Suffix letters “PC” indicate PC terminals; all others have solder lugs.
ESCUTCHEONS
Series Y(*)F. Female receptacle for panel or chassis mounting.
Rear of panel mount in .875 inch (22.22 mm) diameter hole.
Part Number
Color
Part Number
Color
◊YEF01
◊YEF02
◊YEF03
Red
Black
Green
◊YEF04
◊YEF05
◊YEF08
Blue
White
Yellow
Series Y(*)FD, Y(*)FDPC. Female receptacles. Same as Y(*)F
and Y(*)FPC, respectively, except with FAS-DISCONNECT
detent.
SPECIFYING NOTE: YEM02 escutcheon can be ordered on special order; contact
Switchcraft.
Series YEF Escutcheons. Trim escutcheons provide
distinctive panel appearance and can also color code
connections. Available in black (standard), red, green, white,
and yellow. Other colors possible on special order where
production quantities warrant.
ASSEMBLY/MOUNTING
AII receptacles are rear-of-panel mount (units with PC
terminals also mount/terminate to PC board). Flange fastens
to chassis/panel with two #4-40 machine screws (not supplied).
Use of escutcheons is optional.
Install latch release lever (Series Y(*)F and Y(*)FPC) after
receptacle is fastened to chassis/panel. Insert lever in slot from
front and press inward until it locks (snaps) into place. To
remove lever, depress rear of lever (with screwdriver) through
opening at top rear of housing and pull lever straight out.
YEF02
ESCUTCHEONS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
F SERIES RECEPTACLES
23
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
F SERIES RECEPTACLES
F3MSTF
F3FRAF
F3FSTF
Switchcraft now offers the F Series. Available in male and
female, the receptacles can be mounted from the rear of the
panel. Features include an all metal housing with a ferrite
disk for added EMI/RMI shielding. Both male and female
connectors can be mounted vertical or horizontal to the PC
board. All connectors have a PC-board retention feature to
hold the connectors firmly to the PC board prior to soldering.
See the chart below for part numbers.
SPECIFICATIONS:
ELECTRICAL
Contact Resistance: 50 milliohms maximum, per pole.
Current Rating: 15A
Insulation Resistance: 1,000 MΩ
Dielectric Resistance: 1,000 V rms
Capacitance: 2 to 4 pF
F SERIES FEATURES
• Replaces Cannon XLM-Series
• 3-pin contact; male and female types
• Both male and female fit in same panel cutout
• Locking receptacles
MECHANICAL
Insertion/Withdrawal Forces: 7 pounds maximum/nominal
Insertion: 7 pounds maximum withdrawal.
Life: 10,000 operations (minimum).
ENVIRONMENTAL
• Silver-plated contacts
Thermal Range: -55° C to +85° C
Thermal Shock: Meets MIL-STD-202F, method 107D
Salt Spray: Meets MIL-STD-202F, method 101D (for 16 hrs.)
• Rugged metal shells; satin nickel finishes
• Through-the-shell ground connection and all-metal shells
for greater shielding effectiveness
• Compatible with Switchcraft Q-G®, QGP and other
connectors with similar configurations
• Added EMI/RFI ferrite shield
MATERIAL
Shells: Die-cast; satin-nickel plated
Inserts: Glass-filled thermoplastic.
Socket Contacts: Copper alloy, silver-plated.
Pin Contacts: Copper alloy, silver-plated.
Latch Release: Steel, nickel-plated.
Part
Number
Terminals
Contacts
Housing
Type
F3MSTF
M
Straight
TERMINALS
F3FSTF
F3MRAF
F3FRAF
F
M
F
Two terminations are available on F-Series receptacles:
1. Straight PC-terminals – direct termination to PC-board.
Housing mounts to panel.
2. Right Angle PC terminals – direct termination to
PC-board at right angle. Housing mounts to panel.
Silver
Satin Nickel
Right Angle
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
24 F SERIES RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
F SERIES RECEPTACLES (continued)
F3MSTF
F3FSTF
F3MRAF
F3FRAF
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
Q-G® ADAPTERS, ACCESSORIES
25
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
Q-G® ADAPTERS, ACCESSORIES
Male and female Q-G ® inserts with 3-7 pins/contacts, fit
appropriate plug and receptacle housings. Female
inserts available with standard latchlock or
FAS-DISCONNECT detent mating, and with solder or
PC terminals. Intended for replacement, or building into
equipment such as microphones and transducers.
Q-G® CONNECTOR INSERTS
Insert
Pins/
Contacts
Standard
Latchlock
FAS-*
DISCONNECT
Male
Inserts
—
◊ QG3FDPC
QG3FD
QG4FD
QG5FD
QG6FD
—
3
3
4
5
6
7
QG3F
QG4F
QG5F
QG6F
QG7F
QG3M
QG4M
QG5M
QG6M
QG7M
QG7FD
*Suffix letters “PC” indicate PC terminals; all others (except “S”)
have solder lugs.
**Suffix letter “S” indicates locking PC terminal and plastic housing.
◊ Special order only. Contact Switchcraft.
Note: Add suffix “BAU” for black insert with gold-plated contacts.
Right-angle male panel receptacle.
Mounts with two, #5-40 machine screws.
W(*)M RECEPTACLE
Part Number
Insert Pins
W3M
W4M
3
4
3-pin plug shorts out unused hi-Z microphone inputs or other sensitive
circuits (shorting jumper installed between pins 2 and 3). 6" (152.4 mm)
chain fastened to end pin to prevent plug loss. Switchcraft can install
special wiring for a nominal extra charge.
SHORTING PLUG
Part Number
Insert Pins
◊N3MS
3
◊ Available on special order only; contact
Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
26 Q-G® WALL PLATE RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Q-G® WALL PLATE RECEPTACLES
G(*)M WALL PLATE RECEPTACLE
J(*)F WALL PLATE RECEPTACLE
Wall plate with one B3M or B4M male
receptacle mounted (in “D”-shaped
hole to prevent turning) on standard
single electrical outlet box. Cover
mounting screws included.
Wall plate with one, D3F or D4F female
receptacle. Mounts on standard single
electrical outlet box. Cover mounting
screws included.
Part
Number
Insert
Pins
Part
Number
Insert
Pins
Finish
Finish
◊G3MS
◊J3FS
3
3
Stainless
Steel
Stainless
Steel
◊G4MS
4
◊J4MS
4
◊ Special order only. Contact Switchcraft.
◊ Special order only. Contact Switchcraft.
H(*)M WALL PLATE RECEPTACLE
K(*)F WALL PLATE RECEPTACLE
Wall plate with two, B3M
or B4M male receptacles
mounted (in “D”-shaped
holes to prevent turning)
Wall plate with two, D3F or
D4F female receptacles.
Mounts on standard single
electrical outlet box. Cover
mounting screws included.
on
standard
single
electrical outlet box. Cover
mounting screws included.
Part
Number
Insert
Pins
Part
Number
Insert
Pins
Finish
Finish
◊H3MS
K3FS
3
3
Stainless
Steel
Stainless
Steel
◊H4MS
4
◊K4FS
4
◊ Special order only. Contact Switchcraft.
◊ Special order only. Contact Switchcraft.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
Q-G® CONNECTOR-ADAPTERS 27
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
Q-G® CONNECTOR-ADAPTERS
321
322
323
324
383A
384A
Switchcraft Q-G ® Connector-Adapters, designed to solve
common interconnection problems, are ideally suited to the
interconnection of microphones, mixers, amplifiers, public
address and sound reinforcement equipment, broadcast
equipment, and any other component that does not have an
appropriate mating connector. All are completely shielded,
and incorporate the high quality and outstanding design features
of the Switchcraft line of Q-G Audio Connectors, including:
Phono Jack Pin Receptacle: Brass, silver-plated,
copper alloy.
Phono Jack Insulation: Thermoplastic.
321. Phono plug to 3-contact female audio-connector
(Switchcraft® A3F).
322. Phono jack to 3-contact female audio-connector
(Switchcraft® A3F).
323. Phono plug to 3-pin male audio-connector
(Switchcraft A3M).
1. Separate ground terminal.
2. Ground Contactors.
3. Captive Design® Insert Screw
4. High impact Thermoplastic Insulation.
324. Phono jack to 3-pin male audio-connector
(Switchcraft® A3M).
383A. Three-contact female audio-connector
(Switchcraft® A3F) to standard .250" (6.35 mm)
diameter 3-conductor extension phone jack.
MATERIAL SPECIFICATIONS
PHONE JACK AND PLUG TERMINATIONS
Shell: Copper alloy, nickel-plated.
Insulation: Paper-base phenolic.
Plug Tip and Sleeve: Copper alloy, nickel-plated.
Phone Pin and Plug Housing: Copper alloy, nickel-plated.
Phono Plug Insulation: Rigid plastic.
Phono Jack Housing: Steel, copper alloy-plated,
tarnish-resistant.
384A. Three-pin male audio connector
(Switchcraft® A3M) to standard .250" (6.35 mm)
diameter 3-conductor extension phone jack.
321
322
323
324
383A
384A
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
28 QG® AUDIO CONNECTOR ADAPTERS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Q-G® AUDIO CONNECTOR-ADAPTERS
386A: Three-contact female audio connector (Switchcraft® A3F)
to standard .250" (6.35 mm) diameter 3-conductor phone plug.
387A: Three-pin male audio connector (Switchcraft® A3M) to
standard .250" (6.35 mm) diameter 3-conductor phone plug.
389: Three-contact female audio connector (Switchcraft® A3F)
at both ends. Pre-wired contacts: 1 to 1, 2 to 2, 3 to 3.
390: Three-pin male audio connector (Switchcraft® A3M)
at both ends. Prewired pins: 1 to 1, 2 to 2, 3 to 3.
386A
389
387A
390
S*FM AUDIO CONNECTOR-ADAPTER AUDIO “Y” ADAPTERS
A
C
B
Male-female connector conversion has male Q-G® insert at one
end and corresponding female Q-G® insert at the other. Designed
to accept internally connected transformer, attenuator, or other
circuitry inline with microphone input. Includes 1.50" (38.1 mm)
long x .594" (15.08 mm) diameter of usable internal volume.
Series 391Q Y-Adapters can combine or split typical audio
signals using a combination of Switchcraft Q-G® A3F and A3M
cord plugs. Outputs of two microphones can conveniently be
connected in parallel and connected to a single input using a
391Q23 Y-Adapter. Cabling is 2-conductor shielded, 2-foot long
gray jacket with molded Y-junction at center point. Mates with
Switchcraft Q-G® and QGP® connectors.
Q-G® Cord Plug Part Numbers
Part Number
Plug A
Plug B
Plug C
◊391Q13
◊391Q23
◊391Q33
◊391Q43
◊391Q53
◊391Q63
A3F
A3F
A3F
A3M
A3M
A3M
A3M
A3M
A3F
A3F
A3F
A3M
A3M
A3F
A3F
A3F
A3M
A3M
Female
Insert
Male
Insert
Insert
Pins/Contacts
Part Number
◊S3FM
◊S4FM
◊S5FM
QG3F
QG4F
QG5F
QG3M
QG4M
QG5M
3
4
5
◊ Available on special order only; contact Switchcraft for price and delivery.
Note: “Y” adapters may use either series A(*) or AA(*) plugs.
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
DMX ADAPTER 29
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
DMX ADAPTER
Switchcraft introduces our new series of DMX adapters. The DMX
adapters were developed for use in the theater lighting industry. The
adapters allow the end user to use standard 3 pin XLR cable
assemblies in connecting DMX equipment.The adapters are available
in 3 pin male to 5 pin female and 5 pin male to 3 pin female. All are
wired “straight through.”
S3F5M
FEATURES AND BENEFITS
• Nickel-plated die-cast housing increases durability
• Pre-wired for immediate use
• Available in two configurations
APPLICATIONS
• Theater lighting
• Any DMX application
S5F3M
SPECIFICATIONS
Shell: Die-cast zinc, satin nickel finish
Insert Insulation: Molded thermoplastic
Socket contacts: Silver-plated copper
alloy, tarnish-resistant
Pin contacts: Sliver-plated copper
alloy, tarnish-resistant
ORDERING INFORMATION
S3F5M
3 pin female to 5 pin male
S5F3M
5 pin female to 3 pin male
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
30 Q-G® CONNECTOR-ADAPTER RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Q-G® CONNECTOR-ADAPTER RECEPTACLES
Adapter receptacles mount directly to microphones or
similar equipment to provide highly reliable 3-, 4- and 5-pin
Switchcraft Q-G® connections. Adapter shell and coupling nut
are brass, satin nickel finish.
SERIES M(*)M
Male with shell having 13/16-27 external threads to engage
equipment with internally threaded body. Terminals extend out
rear (threaded end) to permit wiring without disassembly.
SERIES L(*)MN
Male has plain cylindrical shell with knurled, internally
threaded collar to engage external 13/16-27 threads on
microphone body.
Part Numbers
Series
L(*)MN
Series
M(*)M
Insert
Pins
◊L3MN
◊L4MN
◊L5MN
◊M3M
◊M4M
◊M5M
3
4
5
Z MATCHING TRANSFORMERS
SPECIFYING FEATURES
• Plug-in impedance changes
• Fully wired
• Connections bi-directional (low to high impedance or
high to low impedance)
• Rugged die-cast housings
9144
9244
• Mu-metal shielding
MATERIAL SPECIFICATIONS
Shell: Die-cast zinc shell, nickel-plated with black
non-glare metalized foil label.
Shielding: Mu-metal.
Dimensions: Diameter–.75" (19.05 mm) nominal Length –
3" (76.2 mm) nominal (Part Number 92XX); 3.375" (85.73 mm)
nominal (Part Number 91XX).
ELECTRICAL SPECIFICATIONS
Frequency Response: Flat–20 Hz to 20 kHz ± 2 decibels
Impedance: High–50 K ohms (nominal); Low–150 ohms (nominal)
Voltage Step Ratio (Input Power Level); Low to High:
+29 decibels (typical); high to low: -29 decibels (typical)
Series 9000 Line Matching Transformers offer low-loss
interconnections between high and low impedance equipment.
Exclusive mu-metal shielding protects against spurious
electrostatic and RF fields. Units are bi-directional and can be
used as follows:
• Low to hi, such as professional low impedance microphones
to high impedance amplifiers. Stereos, cassette recorders,
public address systems, and mixers.
Part
Number
Switchcraft Connector
◊9115
Lo Z: 3-contact Q-G®
female, A3F
Hi Z: 2-conductor phone plug,
1/4" finger diameter, right
angle handle, 4" extension
(shielded) cable
◊9129
Lo Z: 3-contact Q-G®
female, A3F
Hi Z: 2-conductor phono plug, right
angle handle, 4 inch extension
(shielded) cable
• Hi to low, such as high impedance microphones or electronic
instruments to low impedance amplifiers or mixers.
9144
9244
Lo Z: 3-contact Q-G®
female, A3F
Lo Z: 3-pin Q-G®
male, A3M
Hi Z: 2-conductor phone plug,
1⁄4" finger diameter
Designed to mate with Switchcraft Q-G® connectors.
Available with various terminations; see chart.
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
TINI Q-G® MINIATURE CONNECTORS 31
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TINI Q-G® MINIATURE CONNECTORS
Series TA(*)F, TA(*)FB, TA(*)FL and TA(*)FLB –
Straight female cord plug
Series TA(*)M, TA(*)MB, TA(*)ML and TA(*)MLB –
Straight male cord plug
Series TB(*)M and TB(*)MB – Chassis/panel mount
male receptacle
Series TY(*)F and TY(*)FPC – Chassis/panel, female
receptacle, choice of solder lugs or P.C. terminations.
Series TLP – Looping Plugs
Series TBA(* *) – Audio Adapters
Series TRA(*)M – PC Mount Male Receptacles
Series TRG(*) – Reverse Gender Panel Mount, Cord Mount
TA3F
TA3M
FLEX RELIEF – Protects by minimizing cable bending stress
at point of cable entry. Maximum recommended cable diameter
is .115" (2.92 mm) when flex relief is used. By omitting
flex relief (Series T(*)FL and T(*)ML only), cable up to .170"
(4.32 mm) diameter can be used.
DESIGN FEATURES
STYLE – Streamlined, miniaturized with nickel-plated metal
and contrasting black plastic parts. Designed for light weight
and unobtrusiveness. Also available in conductive black
chrome finish.
ASSEMBLY – Connector parts are mechanically keyed for
simple assembly.
POLARIZATION – Mating male and female connectors are
also mechanically keyed (latch and groove) so that it is impossible
to mate them incorrectly.
CONSTRUCTION – Metal parts are rugged die-cast or
precision machined with nickel-plating; plastic parts are molded
of high dimensional-stability thermoplastic. Advanced design
assures minimum weight consistent with strength and
durability of cord plug housings of .413" (10.5 mm) diameter
Weight: Series TA(*)F plug = .25 ounce (7 g); Series TA(*)M =
.3 ounce (8.5 g).
“SCOOP-PROOF” FEATURE – Fully recessed pins on male
plugs and receptacles cannot be “scooped”, bent or damaged
by accidental mismating with mating connector.
COLOR ESCUTCHEONS – Attractive color escutcheons,
Series TYEF, are recommended for use with Series TY(*)F and
TY(*)FPC receptacles (when rear mounted) for attractive panel
trim, as well as color coding one or more connectors. Colors
are: red, black, gray, green, blue, white and yellow.
INSERTS – Precision molded of thermoplastic for high
mechanical and dielectric strength. Contacts and terminals
are precision formed and plated for intimate contact and low
resistance connections.Terminal numbers are molded on rear
of male insert and on face of female insert for easy
identification (except 6-pin male insert). Inserts can be supplied
for OEM installation in microphones and instrumentation for
optimum connecting reliability. For cord plugs, inserts can also
be supplied for replacements.
CUSTOM Tini Q-G® CABLE ASSEMBLIES – On special
order where production quantities warrant, Switchcraft can
supply assembled and tested Tini Q-G® cables.
MOUNTING
Panel/Chassis Thickness:
Series TB(*)M: .25" (6.35 mm) maximum
Series TY(*)F:
Front—.375" (9.5 mm) maximum
Rear—.093" (2.3 mm) maximum
Series TY(*)FPC:
LATCHLOCK – Positive latch system assures high integrity,
vibration-resistant mating and transfer of shielding connection
between housing, combined with simple, easy fingertip release.
STRAIN RELIEF – Rugged internal clamp holds cable tightly,
while making a secure, low resistance connection between
cable shield and housing.
Front—.312" (7.9 mm) maximum
Rear—.093" (2.3 mm) maximum
TINI Q-G ® AUDIO ADAPTERS
Series TA Tini Q-G ® audio adapters have been designed to
adapt Tini Q-G ® connections to standard audio connectors.
Tini Q-G ® adapters convert to Switchcraft Q-G ® and QGP
connectors and similar full-size connectors.
Tini Q-G ® End
Mates With
Q-G ® End
Mates With
Part Number
◊TA01
◊TA02
◊TA03
◊TA04
◊TA05
◊TA06
TA3F
TA4F
TA5F
TA3F
TA4F
TA5F
A3M
A4M
A5M
A3F
A4F
A5F
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
32 TINI Q-G® MINIATURE CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TINI Q-G® MINIATURE CONNECTORS (continued)
SPECIFICATIONS: (3 – 5 CORD MOUNT ONLY)
Latch (Female): Copper alloy, nickel-plated.
Mounting Nut: Copper alloy, nickel-plated.
ELECTRICAL
Contact Resistance: .010 ohms maximum after life
SPECIFICATIONS:
(and after salt spray).
Current Rating (Carry Only): 5 A, 125 V AC (4 A, 125 V AC
on 5 circuit) based on 30°C maximum.
Insulation Resistance: 510,000 megohms minimum @ 500 V
DC (initial); 10,000 megohms minimum (after humidity test).
Dielectric Strength: 1,000 V (rms).
(6 – 8 Cord Mount and all Receptacles and Adapters)
ELECTRICAL
Contact Resistance: .010 ohm maximum after life.
Current Rating (Carry only): 1.5A, 125 VAC, based
on 30° maximum
Insulation Resistance: 510,000 MΩ minimum
@ 500 VDC (initial).
Dielectric Strength: 250 V rms.
MECHANICAL
Life: 5,000 operations minimum
Insertion/Withdrawal Forces (after life): 6.1 lb./2.77 kg after
life, insertion; 5.6 lb/2.54 kg, withdrawal.
Solderability Standard: Meets EIA RS-186-9E.
Mechanical Shock: Meets MIL-STD-202, method 213B.
Vibration: Meets MIL-STD-202, method 201A.
Wire Size: #22 wire gauge solid; #24 wire gauge stranded.
MECHANICAL
Life: 2,000 operations
Insertion/Withdrawal Forces (after life): –13 pound
insertion; –13 pound maximum withdrawal
Solderability Standard: Meets EIA RS-186-9E.
Wire Size: 28 wire gauge stranded.
ENVIRONMENTAL
Thermal Range: -55°C to + 85°C.
Humidity: Meets MIL-STD-202, method 106D.
Thermal Shock: Meets MIL-STD-202, method 107D.
Salt Spray: Meets MlL-STD-202, method 101.
MATERIAL
Housings, Plugs and Male Receptacles: Copper alloy,
nickel-plated.
Socket Contacts: Copper alloy, silver-plated.
Pin Contacts: Copper alloy, electrotinned.
Flex Relief and Latch Button: Molded thermoplastic.
Ground Terminal: Copper alloy, electrotinned.
Inserts and Insulating Spacer: Molded high strength
thermoplastic, UL 94 V-0.
Latch (Female): Copper alloy, nickel-plated.
Mounting Nut: Copper alloy, nickel-plated.
Ferrite: 43 material, shielded head.
MATERIAL
Housing, Plugs and Male Receptacles: Copper alloy,
nickel-plated. Female Receptacle–Die-cast zinc, nickel-plated.
Black Tini Q-G® Housing: Copper alloy, black chrome-plated.
Pin and Socket Contacts: Copper alloy, silver-plated.
Flex Relief: Molded black thermoplastic elastomer.
Latch Button: Molded black thermoplastic.
Release Lever and Mounting Washer: Steel, nickel-plated.
Standoff/Ground Terminal and Cable Clamp:
Steel, electrotinned.
Frame: Molded thermoplastic, UL 94 V-0.
Inserts and Insulating Spacer: Molded, high strength
thermoplastic.
STRAIGHT FEMALE CORD PLUG
STRAIGHT MALE CORD PLUG
Part
Insert
Part
Number
Insert
Part
Number
Insert
Pins
Part
Number
Insert
Pins
Number Contacts
Contacts2
TA3F
3
3
3
3
4
4
4
TA4FLB*
TA5F
4
5
5
5
6
7
8
TA3M
3
3
3
4
4
4
◊TA5M
5
5
5
6
7
7
TA3FB*
TA3FL1
TA3FLB*
TA4F
TA3MB*
TA3ML
TA4M
◊TA5ML
TA5MLB*
TA6ML1
TA7ML
TA8ML
TA5FL1
TA5FLB*
TA6FL1
TA7FL
TA8FL
TA4MB*
TA4ML1
TA4FB*
TA4FL1
1. Add AU to Part Number for Gold Contacts.
* B indicates black housing
1 Flex relief omitted for larger diameter cable
2. Add AU to Part Number for Gold Contacts.
* B indicates black housing
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
TINI Q-G® MINIATURE CONNECTORS
33
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TINI Q-G® MINIATURE CONNECTORS (continued)
TB(*)M AND TB(*)MB RECEPTACLE
TLP(*) LOOPING PLUG
Looping plug is designed for
circuit testing. Other inserts
and wiring patterns are
possible; contact Switchcraft.
Male receptacle for
chassis/panel mounting.
Specially designed
flange permits close
(front) mount on crowded
panels. Mounting
hardware supplied.
Available with PC
terminals. Call factory
for details.
Part
Insert Part
Insert
STRAIGHT FEMALE LOOPING PLUG
Number Pins Number Pins
TB3M
TB3MB*
TB4M
TB4MB*
TB5M
3
3
4
4
5
TB5MB*
TB6M
TB7M
5
6
7
8
Part Number
Insert Contacts
◊TLP4
◊TLP6
4
6
TB8M
* B indicates black housing
◊ Available on special order only; contact Switchcraft for price and delivery.
* Number of insert contacts or pins must be specified to complete Part Number.
REVERSE GENDER TQG SERIES
Same specifications as the original
TQG Series, however, the latch is on
the male cord mount. Available in 4
pin only.
TRG4M
TRGS4F
Part
Number
Insert
Pins
Description
TRGS4F
TRG4M
4
4
Panel mount female
Cord mount male w/latch
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
34 TINI Q-G® MINIATURE CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TINI Q-G® MINIATURE CONNECTORS (continued)
TRA6M
TRA3M
TRA(*)M PC MOUNT MALE RECEPTACLE
The TRA(*)M low profile male receptacles mount in
minimum space from the rear of panel or chassis, and
feature space-saving right-angle construction and PC type
terminals. The TRA3M is a cost-effective choice for audio
equipment, medical instrumentation, computer equipment and
test/measurement applications. Also available with 6 pins.
Part Number
Insert Pins
TRA3M
TRA6M
TRA6MF*
3
6
6
*F designates ferrite shielding.
TRAPC3MS
TRASM3M
TRASM*M, TRAPC*M SERIES
Switchcraft introduces an expansion of its popular TQG Series of
connectors.TheTRASM*M andTRAPC*M offers low profile, right
angle PC board mount connectors. The TRASM*M versions are
true surface mount connectors, while the TRAPC*M versions are
through-hole PC mount connectors. Both versions are available
in 3-8 pins. All plastic connectors, the TRASM*M and TRAPC*M
series have flats on the top of the connectors to facilitate pick and
place assembly. As an added option, a non-threaded bushing
version is also available.
ELECTRICAL
Current Rating: 5A for 3-5 pins, 1.5A for 6-8
Contact Resistance: 10 m Ohm max
Insulation Resistance: 100 m Ohm min
Dielectric Withstanding Voltage: 250VAC
Mechanical Life: 2,000 cycles
FEATURES AND BENEFITS
• Low profile, compact design reduces PC board space
• Mates with TQG female cord plugs
• Rated at 5A for 3-6 pins, 3A for 7 and 8 pin versions
MARKETS
• Wireless microphone systems
• Medical Instrumentation
• Test Instrumentation
TINI Q-G® CONNECTORS ORDERING INFORMATION
T
RA
M
___ ___ ___ ___ ___ ___ ___ ___ ___
Tini QG
Reel Size
15" reel, standard tape
and reel size
SPECIFICATIONS
MATERIALS
Right Angle
Housing: Thermoplastic
Contacts: Brass, tin-plated
Nut and Washer: Brass, nickel-plated
Termination
Optional Packaging
TR - Tape and Reel
(std packaging - bulk)
PC - Thru Hole
SM - Surface Mount
Contacts Configuration
Optional Modifier
1 - no thread
3 - 8
Contact Gender
Optional Modifier
S-small Profile (available
in configurations 3&4 only)
M - Male
See next pages for drawings
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
TWIN Q-G® MINIATURE CONNECTORS 35
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TINI Q-G ® MINIATURE CONNECTORS (continued)
TRASM*M, TRAPC*M SERIES
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
36 TINI Q-G® MINIATURE CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TINI Q-G ® MINIATURE CONNECTORS (continued)
TRASM*M, TRAPC*M SERIES
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
TINI Q-G® MINIATURE CONNECTORS
37
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TINI Q-G ® MINIATURE CONNECTORS (continued)
TY(*)F AND TY(*)FPC RECEPTACLES
MOUNTING HOLE DETAIL
SERIES TY(*)F, TY(*)FPC
COMBINED P.C./PANEL
MOUNTING
FRONT
REAR
MOUNTING
MOUNTING
Female receptacle mounts in minimum
space from front or rear panel or chassis.
Terminals are solder lugs, Series
TY(*)F, or P.C., Series TY(*)FPC. All
receptacles have separate ground lug.
RECOMMENDED P.C. BOARD LAYOUT
Part
Number
Insert
Contacts
Part
Number
Insert
Contacts
TY3F
3
3
4
4
TY5F
TY5FPC
5
5
TY3FPC
TY4F
TY4FPC
TQG(*)F AND TQG(*)M
TBA(**) AUDIO ADAPTER
TYEF ESCUTCHEONS
CONNECTOR INSERTS
Male and female inserts with 3, 4, 5
or 6 pins/ contacts. For replacement
(cord plugs only) or build-into
equipment, such as microphones,
transducers and instruments.
Trim escutcheons in seven colors for
use with Series TY(*)F and TY(*)FPC
receptacles, are recommended for rear
mount receptacles. Escutcheons must
be ordered separately.
Male Inserts
3–6 pin male-to-male adapter is designed
for through-bulkhead or cable expansion
usage. Adapter is prewired pin 1 to pin 1,
pin 2 to pin 2, etc. Mounting nuts are
supplied for each threaded end. Panel
hole diameter required is .45"; maximum
panel thickness is .25" (6.35 mm).
Part Number
Insert Pins
◊TQG3M
◊TQG4M
◊TQG5M
◊TQG6M
3
4
5
6
Part Number
Color
◊TYEF01
◊TYEF02
◊TYEF03
◊TYEF04
◊TYEF05
◊TYEF08
◊TYEF11
Red
Black
Green
Blue
Female Inserts
Part Number
Insert Contacts
Part Number
Insert Pins
◊TQG3F
◊TQG4F
◊TQG5F
◊TQG6F
3
4
5
6
◊TBA03
◊TBA04
◊TBA05
◊TBA06
3
4
5
6
White
Yellow
Gray
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
38 HIGH POWER CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
HPC SERIES PANEL MOUNTS AND CORD PLUGS
HPCPR41F
HPCP41F
HPCP410RA
HPCI4F
HPCC4F
HPCC4RAF
• Right angle or straight PC board terminals on panel mounts
• Built in gasket gives all HPC connectors IP 25
environmental ratings
• All HPC Series meet IEC 529 and IEC 1010-1 safety ratings
• Cord plug versions offer “push to lock” design,
no 1/4" turn to engage
HPC SERIES
Switchcraft recently introduced a complete line of panel mount
speaker connectors that are completely compatible with the
Neutrik® Speakon® 4 pole series. We are now introducing a
complete line of cable mounts as well. The complete HPC
Series offers both panel mount and cord mount connectors.
The HPC panel mounts have been updated with new
silver-plated contact materials that boost the contact ratings to
30A per UL 1977 on PC mount versions, 50A per UL 1977 on
Faston® versions. They are still available with either 0.100"
depth flanges or 0.200" depth flanges. The 0.200" depth flange
allows for rear mounting of the HPC Series, and proper mating
of all cord plugs. The panel mount versions are available with
either 0.187" or 0.250" Faston® terminals, and either straight or
right angle PC mount terminals. The right angle PC mount
version also has, as an option, a mounting post which allows
the connector to snap onto the PC board for wave soldering.
The HPC cord plugs are available in either straight, right
angle, or as an in-line. The in-line version mates with either the
straight or right angle cord plug, allowing the end user to extend
cable runs. All cord plugs are compatible with Speakon® panel
mounts. The in-line mates with our HPC cord plugs, as well as
Speakon® cord plugs. The unique feature of the HPC series
cord plugs are the “push to lock” feature, similar to the
connection of an XLR connector. The HPC cord plugs, when
mated to either HPC panel mounts or Speakon® panel mounts
do not require a 1/4" turn to engage. Simply push the connector
in until it locks. To disengage, push forward on the latch lever
and pull the connector out. This feature eliminates the need to
remember to turn the connector to make contact. All HPC cord
plugs utilize 0.250" Faston® terminals, which allow for easy
assembly, and make it easy to change cord plugs. To change
from a straight cord plug to an in-line cord plug, back off the
strain relief nut, twist off the handle, disconnect the Faston®
terminals, fasten the new cord connector, twist on the handle
and the strain relief. Barbs on the handle keep the handle from
vibrating loose from the front shell.
• Cord plug versions accept 10 AWG wire,
0.560" cable OD max
APPLICATIONS
• Loudspeakers
• Power audio amplifiers
SPECIFICATIONS
Materials
Housings: Thermoplastic UL 94V-O rated
Seal Rings: Thermoplastic rubber
Contacts: Silver-plated over copper alloy
ELECTRICAL
PC Terminals Current Rating: 30A per UL 1977
Faston® Terminals Current Rating: 50A RMS w/10AWG
wire, normal ambient, per UL 1977
Voltage Rating: 1,500 AC RMS, Per Mil-Std 202 Method 301
Insulation Resistance: > 2T Ohms
Contact Resistance: 1m Ohm, 1.5mOhm after 1,000
insertion/withdrawals
MECHANICAL
Shock: Mil-Std 202, Method 213B Cond.K
Vibration: Mil-Std 202, Method 201A
Life: 1,000 insertion/withdrawals
Cable Range: 0.560” OD max
ENVIRONMENTAL
Salt Spray: Mil-Std 202, Method 101D Cond. B
Thermal Shock: Mil-Std 202, Method 107G
Temperature Limits: -55 C to +85 C
Moisture Resistance: Mil-Std 202, Method 106E
Life@Ambient Temperature: Mil-Std 202, Method 108A
Touch Proof: IEC 65 and 1010-1
Both HPC panel mounts and cord plugs incorporate a built-in
gasket, which allows them to meet IP 25 harsh environment
ratings, as well as IEC 529 and IEC 1010-1 safety ratings.
FEATURES AND BENEFITS
Weather Tightness: IEC 529, IP 25
• Completely compatible with Neutrik® Speakon®
4 pole connectors
CORD MOUNT ORDERING INFORMATION
• 30A rating per UL 1977 on PC mount versions
• 50A rating per UL 1977 on Faston® versions
• Panel mounts have two different Faston® terminal sizes,
0.187" and 0.250"
• Panel mounts offered with two different flange depths,
0.100" and 0.200"
Part Number
HPCC4F
HPCI4F
Description
Straight Cord Plug
Inline Cord Plug
Right Angle Cord Plug
HPCC4RAF
• 0.200" depth flange offers easy rear mounting
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
HIGH POWER CONNECTORS
39
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PANEL MOUNT ORDERING INFORMATION
H_P__C _P__ ___ __4_ ___ ___ ___
Termination
F - .250" Faston® ; F1 - .187" Faston®; PC - Printed Circuit
RA - Right angle PC; RAP - Right angle PC with mounting post
Series
High Power Connector
Type of Connector
P - Panel
Mounting Holes
Blank - Rectangle: .140” dia. w/Countersink Hole
Blank - Round: .152” dia. w/Countersink Hole
0 - Rec./ Round: .093” Dia. Hole
Type of Housing
Blank - rectangle
R - round
Recessed Flange (Dim. “A”)
1 - .100”; 2 - .200”
Number of Contacts
4
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
40 HIGH POWER CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
EN3™MINI WEATHERTIGHT CONNECTOR SERIES 41
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EN3™ MINI WEATHERTIGHT CONNECTOR SERIES
Cord
Connector
GENERAL FEATURES AND BENEFITS
• Great all-purpose connector “weather” or not sealing feature is required.
• Superior leakage protection. Contact area is double-sealed for
excellent moisture and chemical resistance when mated to
Switchcraft’s connectors.
• Integral O-ring and gasket. O-ring is molded onto cord housing
assembly and gasket is molded onto panel housing assembly
to prevent leakage and eliminate need for additional O-rings
and gaskets.
• Reduced part count for reduced labor to assemble.
• No Grommets. Cable clamp assembly features living hinges,
which snap easily onto and support the cable.
• Thermoplastic rubber body simulates closed entry contact
system to prevent probe damage or accidental loss of
spring retention due to misaligned or bent pins.
Panel
Connector
ENVIRONMENTAL
• Abrasion-resistant thermoplastic boot provides strain relief
and accepts cable diameter .195" to .265".
Temperature Limits: -40°C to +65°C (non-operating)
Moisture Resistance: Mil-Std 202 Method 106F
Insulation Resistance: Mil-Std 202 Method 302
condition B
Thermal Shock: Mil-Std 202 Method 107G
Salt Spray: Mil-Std 202 Method 101D condition B
• Housing rated UL 94V-O against flammability.
• Panel connector shell features a positioning keyway to prevent
misalignments and a polarizing single “D” design for proper panel
mounting and to prevent rotational movement.
• 2-18 pins.
• Exceeds Coast Guard specifications for water tightness
(CFR 46 Part 110.20).
RATINGS
IP16/IP18
IP66/IP68
• Optional cap covers panel housing assembly when not in use.
• Exceeds enclosure rating IP16/IP18 when not mated or
covered and IP66/IP68 when mated or covered (IEC 529).
• Exceeds enclosure rating 6P at 1000V when mated or covered (NEMA 250).
CFR 46 Part 110.20
UL 94V-O
NEMA 250 (6P)
Patent 5,485,673 File 36049
MATING INSTRUCTIONS FOR A CORD CONNECTOR TO A
PANEL MOUNT OR IN-LINE CONNECTOR
EN3™ Weathertight Connector Current Carry Capability
(per UL 498 Standard)
First, align the notched keyway on both the panel mount or in-line and
cord connector.Then, push the cord connector onto the mating connector.
Grasp the coupling ring between the slots, push it toward the panel
mount connector and rotate it clockwise nearly one half a turn. Continue
rotating until you feel the coupling ring ride over the locking “bump”.This
is the locked position.The cord connector is not securely in place unless
this procedure is followed.
▲
▲
50.00
▲
▲
40.00
30.00
20.00
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
APPLICATIONS
▲
Process Control
Communications
10.00 ▲
▲
Marine Electronics
Medical Instrumentation
Geothermal Instrumentation
Transportation
▲
General Industrial Electronics
Harsh Environments
0.00
7
10
12
13
15
Current (Amps) - w/14 AWG Wire
MATERIALS
▲
Female 3 pin
Male 3 pin
Female 8 pin
Male 8 pin
▲
▲
Cord and panel connector shells, contact locking disk,
and cable clamp assembly: Thermoplastic polymer glass
fiber, flame retardant
▲
Coupling ring: Nylon
Rear boot and connector shell interior: Thermoplastic rubber
Contacts: Copper base alloy gold-plated over nickel underplate
Dielectric Withstanding Voltage
Contact size/
Voltage
3000
number of contacts
SPECIFICATIONS
MECHANICAL
#20-2
Shock: Mil-Std 202 Method 213B, condition K
Vibration: Mil-Std 202 Method 201
Life: 600 insertion/withdrawal cycles (minimum)
#20-4
#20-3
#16-2
ELECTRICAL
2000
1000
Voltage Rating (sea level): Tested at 600 VRMS
Insulation Resistance: 100 megohms (minimum) at 77° F
Contact Resistance: 5 milliohms (maximum)
Current Rating: 3.0 Amps (#26 contact)– 9 through 18pin
6.5 Amps (#20 contact)– 7 and 8 pin
#20-7, #20-8
#16-3
#20-5, #20-6
7.5 Amps (#20 contact)– 2 through 6 pin
13.0 Amps (#16 contact)– 2 and 3 pin
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
42 EN3™MINI WEATHERTIGHT CONNECTOR SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
CRIMP TOOLS
Part Number
EN3INS16
CRIMP CONTACT
INSERTION INSTRUCTIONS
Tool Description
Insertion/Extraction Tool for 16 AWG
Insertion/Extraction Tool for 20 AWG
Crimp Hand Tool
EN3INS20
EN3CR
EN3CRAUTO Pneumatic Crimp Tool
EN3POS16
EN3POS20
Positioner for 16 AWG contacts and pins
Positioner for 20 AWG contacts and pins
NOTE: A positioner must be used with the
EN3CR and EN3CRAUTO.
CRIMP CONTACT
EXTRACTION INSTRUCTIONS
Note: Solder and PC contacts are factory assembled
CORD CONNECTOR ASSEMBLY INSTRUCTIONS
STEP 1
Cord Connector: To assemble the three-part cord connector, first feed the end of the cable through the boot, cable clamp
housing, and coupling ring in that order and position as shown in the figure below. NOTE: The coupling ring can also be
inserted onto the cord connector from the front. In-line Connector: Feed the end of the cable through the boot and cable
clamp housing in the order and position shown.
IN-LINE
CONNECTOR
C
BOOT
CABLE CLAMP
HOUSING
COUPLING
RING
CORD
CONNECTOR
BOOT
CABLE
CONTACT PINS
CABLE CLAMP
HOUSING
CONTACT PINS
O-RING
(MOLDED ONTO
CORD CONNECTOR)
STEP 2
Next, strip the cable .218" as shown and begin soldering conductors to pins, or insert contacts crimped on wire starting
with contact #1 next to the "notch" and following with the remaining conductors counter-clockwise with #6 or #8 conductor
in the center.
IN-LINE
CONNECTOR
CORD
CONNECTOR
3/8"
MAX.
SOLDER
SOLDER
3/8"
MAX.
7/32"
7/32"
NOTCH (PIN #1
INDICATOR)
NOTCH (PIN #1
INDICATOR)
9/32"
9/32"
STEP 3
CORD CONNECTOR
CABLE CLAMPS
IN-LINE CONNECTOR
CABLE CLAMPS
Push the cable clamp housing forward until it locks
into the connector body and snap the two clamps
into their compartments.
STEP 4
CORD CONNECTOR
IN-LINE CONNECTOR
Finally, push the boot all the way forward to seat tightly
onto the cable clamp housing.
Remember: Cord connectors will not mate with each other. For cord-to-cord connection,
your customer must order a cord connector plus an in-line connector.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
EN3™MINI WEATHERTIGHT CONNECTOR SERIES 43
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EN3™ MINI WEATHERTIGHT CONNECTOR SERIES (continued)
2 – 8 PIN CORD CONNECTOR
9 – 18 PIN CORD CONNECTOR
EN3 Cord Connector Part Number Scheme
Series Style Pins/
Contacts
Gender
Contact
Size
Contact
Style
Contact
Plating
Packaging
EN3
C
2-18
F: Female
M: Male
16: #16
Leave blank
for #20
26: for 9-18
only
C: Crimp
P: PC
S: Staggered
Leave blank
for solder
AG: Silver
Leave blank
for gold
K: Kit
Leave blank
for bulk
packaging
Notes:
7 & 8 pin not available in cord male
9-18 pin available in either staggered solder or straight solder only
9-18 pin available only with # 26 terminals
AG: Silver plating special order
#16 contact available in 2 & 3 pins only
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
EN3™MINI WEATHERTIGHT CONNECTOR SERIES
44
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
EN3™ MINI WEATHERTIGHT CONNECTOR SERIES (continued)
2 – 8 PIN PANEL CONNECTOR
9 – 18 PIN PANEL CONNECTOR
EN3 Panel Connector Part Number Scheme
Series Style Pins/
Contacts
Gender
Contact
Size
Contact
Style
Contact
Plating
Packaging
EN3
P
2-18
F: Female
M: Male
16: #16
Leave blank
for #20
26: for 9-18
only
C: Crimp
P: PC
S: Staggered
Leave blank
for solder
AG: Silver
Leave blank
for gold
K: Kit
Leave blank
for bulk
packaging
Notes:
7 & 8 pin not available in panel female
9-18 pin available in either staggered solder or straight solder only
9-18 pin available only with # 26 terminals
AG: Silver plating special order
#16 contact available in 2 & 3 pins only
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
EN3™MINI WEATHERTIGHT CONNECTOR SERIES 45
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EN3™ MINI WEATHERTIGHT CONNECTOR SERIES (continued)
2 – 8 PIN INLINE CONNECTOR
EN3 Inline Connector Part Number Scheme
Series Style Pins/
Contacts
Gender
Contact
Size
Contact
Style
Contact
Plating
Packaging
EN3
I
2-8
F: Female
M: Male
16: #16
Leave blank
for #20
C: Crimp
P: PC
Leave blank
for solder
AG: Silver
Leave blank
for gold
K: Kit
Leave blank
for bulk
packaging
Notes:
7 & 8 pin not available in inline female
#16 contact available in 2 & 3 pins only
AG: Silver plating special order
2 – 8 PIN OVERMOLDED CORD AND INLINE CONNECTOR
(See Cable Section for More Details.)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
46 DIN CONNECTORS AND PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
DIN CONNECTORS
MATERIAL
SPECIFICATIONS
Shell: Die-cast zinc alloy, nickel-plated.
Receptacle Mounting Flange: Steel.
Receptacle Body: Plastic.
Insert Material: Plastic.
Socket Contacts: Tin-plated.
Pin Contacts: Tin-plated.
ELECTRICAL
Contact Resistance: Cord Plugs and Receptacles;
.010 ohms, contact spring/pin .030 ohms, ground clip/shell.
Control and Switching Receptacles; .015 ohms, contact
spring/pin; .020 ohms, switch contacts.
Dielectric Withstanding Voltage:
Contact Rating:
500 V (rms)
5-pin; 3A, 34 V DC
Switching Contacts: Silver-plated.
Cable Relief Bushing: Soft plastic.
105 MΩ
Leakage Resistance:
Recommended Wire Size:
22 wire gauge maximum
PIN ARRANGEMENTS
MECHANICAL
INSERTION/WITHDRAWAL FORCES:
Number of
Contacts
Insertion Force
pound/N
3.6/(16)
Withdrawal Force
pound/N
CONTACT ARRANGEMENTS
2
3
4
5
6
7
8
.45- 2.7/(2-12)
.67- 4.1/(3-18)
.90- 5.4/(4-24)
1.24- 6.8/(5.5-30)
1.46- 8.1/(6.5-36)
1.68- 9.5/(7.5-42)
1.90-10.8/(8.5-48)
5.4/(24)
7.2/(32)
9.0/(40)
10.8/(48)
12.6/(56)
14.4/(64)
NOTE: All connectors meet DIN specifications #41524. Din specification
numbers (except for 4-pin, 5-pin @ 240°, and 8-pin @ 262°)
STRAIGHT
CORD PLUG
with Shielded Barrel
DIN PLUGS
STRAIGHT
CORD PLUG
with 30° lock ring
Type 15GM7M – typical: Male cord plug with shielded barrel
and insulated snaplock plastic body. Two piece metal barrel
surrounds pin insert to form an electrical shield. The entire
insert assembly is held together by snapping the insulated
plastic shell over the assembly. The barrel’s special metal tab
locks the shell in place. Standard color of plastic shell is gray.
All-purpose cable clamp.
Type 05CL5M – typical Male plug with ground key-rib.
Unique 30° turn lockring securely fastens two halves of
connector. Mates with lock flange female connectors and
receptacles. Insert screw holds insert assembly in shell and
also retains lockring on shell. Flexible black strain relief with
7/32" diameter cable entry. Heavy duty clamp.
ORDERING INFORMATION
Pin
Part Number
Description
Arrangement
ORDERING INFORMATION
◊
3 pins at 180°
Gray body and strain relief.
05GM3M
2
Part Number
◊05CL3M
05CL5M
Description
3 pins at 180°
5 pins at 180°
4 pins at 210°
5 pins at 240°
7 pins at 270°
8 pins at 270°
Pin Arrangement
5 pins at 180°
2
5
3
4
7
9
05GM5M
5
3
Gray body and strain relief
4 pins at 210°
Gray body and strain relief
◊09GM4M
◊09CL4M
◊12CL5M
◊15CL7M
◊15CL8M
◊
5 pins at 240°
Gray body and strain relief
12GM5M
4
6 pins at 240°
◊12GM6M
◊15GM7M
◊15GM8M
◊20GM8M
6
Gray body and strain relief
7 pins at 270°
Gray body and strain relief
◊ Available on special order only; contact Switchcraft for price and delivery.
7
8 pins at 270°
Gray body and strain relief
9
8 pins at 262°
Gray body and strain relief
10
SPECIFYING NOTE: Use letter “JL” in place of “GM” to order same part number
with black housing.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
DIN PLUGS AND RECEPTACLES
47
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
DIN PLUGS AND RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel
RIGHT-ANGLE CORD PLUG
with 8 Position Barrel and 30°
Lockring
TYPE 12BL6M – TYPICAL
TYPE 05YL5M – TYPICAL
Male plug with ground key-rib. Nickel-plated diecast handle.
Contact friction coupling. Flexible black strain relief. Heavy
duty cable clamp.
Right-angle chassis hugging, male plug with flexible strain
relief. Unique 8-position barrel gives you a choice of any one
of eight different cable entry angles. ground key rib 30° turn
lockring securely fastens two halves of connector.
ORDERING INFORMATION
ORDERING INFORMATION
Part Number
Description
Pin Arrangement
Part Number
◊05YL3M
◊05YL5M
◊09YL4M
◊12YL5M
Description
3 pins at 180°
5 pins at 180°
4 pins at 210°
5 pins at 240°
Pin Arrangement
2 pins with insulated
switch actuator
2
5
3
4
◊03BL2M
1
◊05BL3M
◊05BL5M
◊09BL4M
12BL5M
◊12BL6M
◊15BL7M
◊15BL8M
3 pins at 180°
5 pins at 180°
4 pins at 210°
5 pins at 240°
6 pins at 240°
7 pins at 270°
8 pins at 270°
2
5
3
4
6
7
8
RIGHT-ANGLE CORD PLUG
with 8 Position Barrel
05DL5M shown
TYPE 05DL5M – TYPICAL
Right-angle chassis hugging, male plug with flexible black
rubber strain relief. Unique 8-position barrel offers a choice of
eight different cable entry angles.
ORDERING INFORMATION
Part Number
◊05DL3M
◊05DL5M
◊09DL4M
◊12DL5M
◊12DL6M
◊15DL7M
Description
3 pins at 180°
5 pins at 180°
4 pins at 210°
5 pins at 240°
6 pins at 240°
7 pins at 270°
Pin Arrangement
2
5
3
4
6
7
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
48 DIN PLUGS AND RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
DIN PLUGS AND RECEPTACLES (continued)
STRAIGHT CORD PLUG with Flush Socket Insert
STRAIGHT CORD PLUG with Lock Flange
TYPE 06EL5F – TYPICAL
TYPE 06AL5F – TYPICAL
Female plug with ground contact. Lock flange designed to
accept 30° lockring. Insert screw firmly holds insert assembly in
shell. Flexible black strain relief with 7/32" diameter cable entry.
Heavy duty cable clamp.
Female plug with ground contact. Diecast metal shell,
nickel-plated. Two contact plug, Part number 04AL2F includes
a break circuit switch (1-B) which is opened by engaging the
insulated switch actuator of the mating plug or receptacle.
Flexible black strain relief.
2.24
57.0
.216
5.5
.393
10.0
.216
5.5
.456
11.6
.622
15.8
0.51
1.3
1.22
31.0
Stain Relief
ORDERING INFORMATION
ORDERING INFORMATION
Part Number
Description
Contact Arrangement
Part Number
◊◊06EL5F
13EL5F
Description
Contact Arrangement
5 contacts at 180°
5 contacts at 240°
8 contacts at 270°
F
E
N
◊06AL5F
◊13AL5F
◊13AL6F
◊15AL7F
◊15AL8F
5 contacts at 180°
5 contacts at 240°
6 contacts at 240°
7 contacts at 270°
8 contacts at 270°
F
E
G
H
N
◊15EL8F
RECEPTACLE with Extended Shell
ORDERING INFORMATION
TYPE 57KD3M – TYPICAL
Male receptacle, 3 pins, with ground key-rib. Diecast
extended shell and flange for chassis or panel mounting.
Turret terminals.
Part Number
Description
Pin Arrangement
57KD3M
3 pins at 180°
2
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
DIN RECEPTACLES 49
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
DIN RECEPTACLES (continued)
RECEPTACLE with Closed Circuit Switch
RECEPTACLE for Chassis or Panel Mounting
For shielded and extended barrel plugs
TYPE 59GB3F – TYPICAL
TYPE 57GB5F – TYPICAL – FLARED SOLDER
TERMINALS
Drawn metal recessed shell with mounting flange and ground
contact. Available flared solder terminals. Part Number
58GB3F features two extra blanks in insert for proper mating
(5 pins at 180°) plug where applications may require greater
connector flexibility. Flared solder terminals standard.
Unique 3 and 5 contact receptacles include a 1-B (closed
circuit) switch which is mounted to drawn metal shell. Switch
is actuated by the shell of the mating plug. Receptacles also
provide complete shielding through the ground contact.
Flared solder terminals.
ORDERING INFORMATION
ORDERING INFORMATION
Part Number
◊57GB3F
◊57GB5F
◊60GB4F
◊61GB5F
◊61GB6F
◊62GB7F
◊62GB8F
Descriptions
Contact Arrangement
Part Number
Description
Contact Arrangement
3 contacts at 180° plus
closed-circuit switch
(Schematic #5)
3 contacts at 180°
5 contacts at 180°
4 contacts at 210°
5 contacts at 240°
6 contacts at 240°
7 contacts at 270°
8 contacts at 270°
B
F
◊59GB3F
B
D
E
G
H
N
◊ Available on special order only; contact Switchcraft for price and delivery.
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
50 DIN RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
DIN RECEPTACLES (continued)
RECEPTACLE for Lockring Plug
Flared solder terminals on
Part Number 57HB5F
RECEPTACLE
for Printed Circuit Board
Mounting
TYPE 61HA5F – TYPICAL
TYPE 57NC5F – TYPICAL
Female receptacle with ground contact. Chassis or panel
mount. Diecast bayonet extension shell with mounting flange.
Mates with all lockring plugs. such as Part Number 12CL5M.
Part Number 55HA2F includes closed-circuit switch (1-B). All
receptacles have straight solder terminals, except as noted.
Mounts to printed circuit boards. Special PC type terminals
“snap-in” precut boards. See drawing. Tubular metal shell
with ground contact. Part Number 58NC3F mates with
either 3 pin or 5 pin (at 180°) plugs because of its 2 extra
blanks in the contact insert.
ORDERING INFORMATION
ORDERING INFORMATION
Part Number
Description
Pin Arrangement
Part Number
Description
Contact Arrangement
◊55HA2F
2 contacts with
closed-circuit switch
(Schematic #4)
A
◊57NC5F
5 contacts at 180°
F
3 contacts at 180°
2 extra blanks
◊58NC3F
C
57HB3F*
57HB5F*
60HA4F
61HA5F
62HB7F*
62HB8F*
3 contacts at 180°
5 contacts at 180°
4 contacts at 210°
5 contacts at 240°
7 contacts at 270°
8 contacts at 270°
B
F
◊60NC4F
◊61NC5F
◊62NC7F
◊62NC8F
4 contacts at 210°
5 contacts at 240°
7 contacts at 270°
8 contacts at 270°
D
E
H
N
D
E
H
N
“C” in part number indicates PC terminals.
◊ Available on special order only; contact Switchcraft for price and delivery.
*Flared solder terminals
“A” in part number indicates straight terminal. (solder lug).
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
DIN RECEPTACLES 51
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
RIGHT-ANGLE
RECEPTACLE
for Printed Circuit
Board Mounting
ORDERING INFORMATION
Part Number
◊57PC3F
◊57PC5F
◊60PC4F
◊61PC5F
◊61PC6F
◊62PC7F
◊62PC8F
Description
Contact Arrangement
3 contacts at 180°
5 contacts at 180°
4 contacts at 210°
5 contacts at 240°
6 contacts at 240°
7 contacts at 270°
8 contacts at 270°
B
F
D
E
G
H
N
TYPE 57PC5F–TYPICAL
Mounts to PC boards. Plugs connect at right-angle to mounting
surface. Part Number 57PC3F mates with either 3 or 5 pin
(at 180°) plugs because of two extra blanks in contact insert.
ground contact provides complete shielding through receptacles.
◊ Available on special order only; contact Switchcraft for price and delivery.
61PC5F, 61PC6F
.709
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
52 DIN RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
RIGHT-ANGLE
Part Number
◊57PC3FS
◊57PC5FS
◊60PC4FS
◊61PC5FS
◊61PC6FS
◊62PC7FS
◊62PC8FS
Description
Contact Arrangement
SHIELDED RECEPTACLE
for printed circuit board
mounting
3 contacts at 180°
5 contacts at 180°
4 contacts at 210°
5 contacts at 240°
6 contacts at 240°
7 contacts at 270°
8 contacts at 270°
B
F
D
E
G
H
N
TYPE 60PC4FS–TYPICAL
SPECIFYING NOTE: Another series of receptacles with a trimmed metal flange
.052" (1.32 mm) below housing top is available. Replace suffix “S” with “T” in
part numbers above to specify these receptacles or contact Switchcraft.
Mounting: #2 or #3 self-tapping screw.
Similar to 57PC5F – Typical, except flange surrounding face
of insert is metal to provide through-grounding between plug
and receptacle and to potential panel/chassis for common
grounding.
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
MINI-DIN RECEPTACLES 53
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
DIN RECEPTACLES (continued)
MINI-DIN RIGHT-ANGLE RECEPTACLES
Miniature DIN right-angle connectors are designed for
personal computer, video and data communications, medical
and instrumentation equipment and systems.
RIGHT-ANGLE, PC MOUNT RECEPTACLES
Available with 3 through 8 contacts, female only, receptacles
also have a standard (and separate) ground contact system.
Ground terminal can be straight or snap-in type. Snap-in
terminals are bifurcated to assure tight hold down on PC
board before, during and after soldering. Solder wicking
around the terminal strengthens the connection. Additionally,
PC terminals are staggered to assure more “hold down”
capability during soldering.
Receptacle/plug retention is “friction” type, and a separate
outer shield can be specified.
SPECIFICATIONS
Ratings: 1A, 100 VAC; 2A, 12 VDC.
Series SMD*FRAX10: 3 through 8 contacts, female,
right-angle PC mount, straight ground terminal, and
no outer shield.
Insulation Resistance: 50 MΩ minimum
Dielectric Strength: 250 VDC for 1 minute.
Contact Resistance: 30 mΩ maximum
Insertion/Withdrawal Force: 0.8 to 5 kilograms
Withdrawal Force: 0.8 to 4 kilograms
Contacts/Terminals: Copper alloy, silver or gold-plated
Ground Terminal: Copper alloy, nickel-plated.
External Shield: Copper alloy, solder-coated.
Body: Black molded thermoplastic, UL 94V-0.
Series SMD*FRAX20: Same as SMD*FRAX10, except
with bifurcated snap-in ground terminal.
Series SMD*FRAX11: 3 through 8 contacts, female,
right-angle PC mount, straight ground terminal, and
outer shield.
Series SMD*FRAX21: Same as SMD*FRAX11, except
with snap-in ground terminal.
Series DMD*FRAX111: Dual stacked miniature DIN
connectors, available in 4, 5, 6, and 8 contacts. Shielded
and non-shielded versions available.
Dimensions: .552" (14 mm) wide x .502"
(12.8 mm maximum depth x .642" (16.3 mm) height,
including terminals.
MINI-DIN RIGHT-ANGLE RECEPTACLES PART NUMBER SCHEME
Series
SMD-Single Insert#:
DMD-Dual 3-8
Contacts Style
Shield/Ground
Optional Mounting Screw Hole
FRA
110: Unshielded, no snap-in ground
111: Shielded, no snap-in ground
120: Unshielded, snap-in ground
121: Shielded, snap-in ground
A: Adds screw hole
Blank: None
Note: Dual available in 4,5,6, and 8 only
Note: Snap-in ground available on single only
Note: Optional mounting screw hole available on dual only
Note: Special order only, contact factory for details
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
54 MINI-DIN RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
DIN RECEPTACLES (continued)
SMD SERIES
RECOMMENDED PC BOARD LAYOUTS (Viewed from component side)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
MINI-DIN RECEPTACLES
55
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
DIN RECEPTACLES (continued)
DMD SERIES
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
56 SINGLE AND DUAL STACKED USB CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
SINGLE AND DUAL STACKED USB CONNECTORS
SUSB
DUSB
Switchcraft introduces single and dual USB connectors. The USB
connectors are fast becoming the industry standard for plug and
play connectivity between PCs and their peripherals. The DUSB
and USB connectors are RAPC mounted, with kinked terminals for
snap-in placement to the PC board. Both meet all Universal Serial
Bus standards.
FEATURES AND BENEFITS
• Snap-in terminals facilitate wave soldering
• Shielded for reduced EMI/RFI emissions
• Dual stacked version increases PC board density
APPLICATIONS
• Personal Computer
• Data Communications
• Medical Equipment
• Test Equipment
• Instrumentation
SPECIFICATIONS
GENERAL
Voltage Rating: 30 VAC (rms) Max.
Current Rating: Signal application only, 1A Max. per contact
Contact Resistance: 25m ohms Max. initial
Temperature Rating: 32°F to 104°F (0°C to 40°C)
Insertion Force: 7.7 lbs Max. (3.5 kg Max.)
Withdrawal Force: 0.8 lb Min. (0.4 kg Min.)
Life: 1500 cycles
MATERIALS
Body: Black, molded thermoplastic, UL 94V-0
Shell: Copper alloy, tin plated
Contact Terminal: Copper alloy, gold plating in mating area,
tin plating on solder tails, all over nickel plating.
Part Number
Description
SUSB Single
DUSB Dual Stacked
USB Connector
USB Connector
Note: Special order only, contact factory for details.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
SINGLE AND DUAL STACKED USB CONNECTORS
57
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
SINGLE AND DUAL STACKED USB CONNECTORS (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
58 IEEE 1394 FIREWIRE CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
IEEE 1394 FIREWIRE CONNECTORS
1394SMT
1394RAPC
Switchcraft introduces both right angle PC and surface
mount versions of IEEE 1394 Firewire connectors. The
Firewire connectors are becoming another connector
standard used in the upcoming multimedia/computer
market. The connectors meet IEEE 1394R-4006N Series
standards.
FEATURES AND BENEFITS
• Shielded housings to reduce EMI/RFI emissions
• Mounting posts add stability for wave soldering
• Low profile requires less space
APPLICATIONS
• Multimedia
• Video
• Personal Computers
• Computer Peripherals
SPECIFICATIONS
GENERAL
Voltage Rating: 40 VAC
Current Rating: 1.5A
Contact Resistance: 30m Ohms Max.
Temperature Rating: -55°C to +105°C
Insertion Force: 6.0 lbs. Max.
Withdrawal Force: 4.4 lbs. Min.
Lifecycles: 1,500 Min.
Part Number
1394RAPC
1394SMT
Description
IEEE 1394 RAPC
IEEE 1394 SMT
Note: Special order only, contact factory for details.
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
IEEE 1394 FIREWIRE CONNECTORS
59
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
IEEE 1394 FIREWIRE CONNECTORS (continued)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
60 SLIM-LINE CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
SLIM-LINE CONNECTORS
TYPICAL SL172F REAR MOUNT RECEPTACLE
TYPICAL SL402M CORD PLUG
PIN TERMINALS
Large, rugged plated
copper alloy; solder
cup type.
HEX NUT
Used in mounting
rear or front of
panel receptacles
(supplied standard).
THREADED
BUSHING
FEMALE INSERT*
Rugged molded
black plastic barrel
construction;
positively keyed to
housing.
FLATTED BARREL
Keys to inside flat
on male insert.
Polarizes the con-
nection. Correct
CABLE CLAMP
Extra large and
CORD PLUG
HOUSING
Precision-drawn,
plated copper alloy
with non-glare
matte finish.
STRAIN RELIEF
SPRING
Provides positive
relief from cable
wear at opening in
plug housing.
Coupler ring on
mating plug threads
onto bushing and
keeps plug/receptacle
from working loose.
rugged clamp pro-
tects soldered ter-
minations (also
facilitates grounding/
shielding feature
when used on
mating every time.
receptacle insert).
LOCK WASHER
Prevents rear
or front of panel
receptacle from
working loose
when installed
(supplied standard).
REAR OF
FLAT WASHER
Used in mounting
rear and front of
panel receptacles
(supplied standard).
CONTACT
CONTACTS
Held captive in
insert. Excellent pin
retention force.
Copper alloy plated.
MALE INSERT*
Rugged black
LATCH SPRING
Captive spring locks
insert to housing
COUPLER RING
Held captive on plug; Latch spring on
LATCH DETENT
PANEL MOUNT
RECEPTACLE
Tough, plated
TERMINALS
Rugged solder lug
type; copper alloy
plated
plastic; keyed to
housing. Durable
plated copper alloy
pins are 100%
molded-in.
non-reflective matte
finish. Threads onto
receptacle bushing
(or mating plug) to
hold connector
halves secure
from accidental
separation.
insert seats in
detent to hold insert
firmly in housing.
diecast housing
with non-reflecting
matte finish. Mounts
in D-shape (self-
keyed) hole. Other
receptacle types
are: Front of Panel
Mount and Flange
Mount.
*NOTE: Insert
fits both plug
and receptacle
housings; can be
interchanged at
any time.
DESIGN FEATURES
Slim-Line® Audio Connectors are a unique series of premium
quality connectors featuring interchangeable inserts which
allow any plug or receptacle to be male or female. This
versatility is valuable in a wide variety of applications:
microphones, public address systems, 2-way, CB, ham, and
marine radios, audio-visual systems, industrial control and
instrumentation, broadcast, security and medical electronics.
Receptacles can be specified with same male and female insert
combinations as cord plugs. For rear and front of panel
mounting types, hex nuts, lock washers, and flat washers are
supplied. For flange mount receptacles, mounting holes in flange
accept #4 machine screw or .125" (3.18 mm) diameter rivet.
CORD PLUGS
Miniature Cord Plugs feature nickel-plated copper alloy
housings with matte finish on exterior parts. Plugs may be
specified with inserts having 2-, 3-, 4- and 5-pins (male) or
contacts (female), or 2-, 3-, or 4-contact receptacles having
shunts (N.C.) on two contacts (special order only). Extra large
cable clamp protects against pulling and twisting strains on
terminations. Strain relief spring protects against excess cable
wear at entry point at rear of housing. Cord plugs accept cables
up to .281" (7.14 mm) diameter. Captive coupler ring feature
(Series SL40) provides secure mechanical connection and
protection against shock and vibration between cord plugs and
mating plug (Series SL41) or receptacle.
APPLICATIONS
Retrofit/Replacement; Slim Line Cord Plug (SL405M) and
Receptacle (SL105F) are recommended as a possible choice
to replace Switchcraft/DIN plug (12CL5M) and receptacle
(55HA5F). Receptacle SL105F fits the same mounting holes
as the Switchcraft/DIN receptacle.
Four pin/contact Slim-Line plugs and receptacles are
recommended as direct replacements for the original
Slim-Line connectors, Series 2504, and for the molded
version of the Slim-Line connector, Style ST34.
RECEPTACLES
Three types of receptacles can be specified:
1. Flange mount (Series SL10)
2. Rear of panel mount (Series SL17)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
SLIM-LINE CONNECTORS 61
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
SLIM-LINE CONNECTORS (continued)
SPECIFICATIONS
MATERIALS
INSERTS
Inserts are molded of high-strength plastic, and are
completely interchangeable between plug and receptacle
housings at any time. Inserts are keyed to housings, and male
and female inserts are polarized to prevent mismating.
Receptacle Housings: Die-cast zinc, nickel-plated.
Cord Plug Housings: Copper alloy, nickel-plated.
Inserts: Glass-reinforced thermoplastic. UL 94 V-0.
Female Contacts: Copper alloy, silver-plated, solder lug type.
Pins: Copper alloy, silver-plated, solder cup type.
Cable Clamp, Strain Relief, and Mounting Hardware:
Steel, plated. Latch: Steel, plated.
PIN/CONTACT CONFIGURATIONS:
Pins
Contacts
Contacts (Shunts)
2
3
4
5
2
3
4
5
2 (N.C. Shunt on each contact)
3 (N.C. Shunts on contacts 1 and 3)
ELECTRICAL
Current Rating: 5 Amps carry only.
4 (N.C. Shunts on contacts 1 and 4)
_
◊Add an “S” to end of part number for shunts. Special order only.
MOUNTING
Cord Plugs: Plugs accept cables up to .281" (7.14 mm) diameter.
Insert is installed from front, and the captive latch spring locks
insert to housing. To remove insert from receptacle, depress
latch spring and apply pressure to rear of insert (DO NOT
APPLY PRESSURE TO TERMINALS). On cord plugs, depress
latch spring and press in on strain relief to free the insert.
Receptacles: Flange mount type mounts in panels or chassis
up to .188" (4.78 mm) thick. .125" (3.18 mm) diameter holes
accept #4 machine screws or .125" (3.18 mm) diameter rivets.
Rear and front of panel types mount in “D”-shaped hole in panels
or chassis up to .219" (5.56 mm) thick. Hex nut (SL01), lockwasher
(SL02), and flat washer (SL03) are supplied for mounting.
GROUNDING/SHIELDING
Housings shield internal connections and provide ground
(common) connections without using a pin/contact. On cord
plugs, ground lead (or shield) is connected to cable clamp. For
receptacles Cable Clamp, SL04 is ordered separately as a
special and installed. If desired, ground/shield connection may
then be made to clamp. When mated, a continuous, shielded,
low resistance path is made through the connector.
CABLE CLAMP AND STRAIN RELIEF
Cord Plugs: Plugs are supplied with rugged cable clamps and
strain relief springs. Cable clamp serves two valuable functions: to
firmly hold cable to prevent pulling or twisting strains on soldered
terminations, and as a connecting point for ground (common) or
shield when grounding/shielding through the connector is
required.
Receptacles: Receptacles are not supplied standard with
cable clamp for strain relief. If grounding/shielding feature is
desired, separate Cable Clamp, SL04, is installed on receptacle
insert.
Part Number
Item
◊SL01
◊SL02
◊SL03
◊SL04
◊SL05
Hex Nut
Lockwasher
Flat Washer
MOUNTING HARDWARE
(Supplied with Series SL17 and SL18 receptacles)
Cable Clamp
Strain Relief Spring
SLIM-LINE CONNECTOR PART NUMBERING SYSTEM
Number of
Contacts
SERIES
HOUSING TYPE
Gender
Options
SL
SLIM-LINE
NONE
2
3
4
5
M MALE
S
WITH SHUNTS
10 RECEPTACLE, FLANGE MOUNT
17 RECEPTACLE, REAR MOUNT
18 RECEPTACLE, FRONT MOUNT
40 CORD PLUG WITH COUPLING RING
41 CORD PLUG WITHOUT COUPLING RING
F
FEMALE
PIN AND CONTACT ARRANGEMENTS
SCHEMATIC CIRCUITS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
62 SLIM-LINE CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
SLIM-LINE CONNECTORS (continued)
SL40 CORD PLUG with Coupler Ring
SL402M (typical)
SL41 CORD PLUG without Coupler Ring
SL413F (typical)
Non-reflective metal shell; coupling ring; 2 through 5 pins
(male) or 2 through 5 contacts (female). Also 2-, 3- and
4-contact inserts with two shunted (N.C.) contacts. Efficient
cable clamp and strain relief.
Non-reflective metal shell; 2 through 5 pins (male) or
2 through 5 contacts (female). Also 2-, 3- and 4-contact inserts with
two shunted (N.C.) contacts. Efficient cable clamp and strain relief.
SL MALE CORD PLUGS
SL MALE CORD PLUGS
Pin
Pin
Part Number
Pins
Arrangements
Part Number
Pins
Arrangements
SL402M
SL403M
SL404M
SL405M
2
3
4
5
1
2
3
4
SL413M
SL414M
SL415M
3
4
5
2
3
4
SL FEMALE CORD PLUGS
SL FEMALE CORD PLUGS
Contact
Contact
Part Number
Contact
Arrangements
Part Number
Contacts
Arrangements
SL402F
SL403F
SL404F
SL405F
2
3
4
5
A
B
C
D
SL412F
SL413F
SL414F
SL415F
2
3
4
5
A
B
C
D
STRAIN RELIEF SPRING
Strain Relief Spring
Part Number SL05
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
SLIM-LINE CONNECTORS
63
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
SLIM-LINE CONNECTORS (continued)
SL10 RECEPTACLES
Flange Mount
SL17 RECEPTACLES
Rear of Panel Mount
SL104F (typical)
SL175F (typical)
SL17 and SL18 Receptacles
Non-turn panel cut-out
Flange mounted; 2 through 5 pins (male) or 2 through 5 contacts
(female). Also 2-, 3- and 4-contact inserts with 2 shunted (N.C.)
contacts.
Rear of panel mount; 2 through 5 pins (male) or 2 through
5 contacts (female). Also 2-, 3- and 4-contact inserts with
2 shunted (N.C.) contacts. Mounting locknut (Part Number
SL01), lock washer (Part Number SL02), and flat washer
(Part Number SL03) supplied.
SL MALE RECEPTACLES
SL MALE RECEPTACLES
Pin
Pin
Part Number
Pins
Arrangements
Part Number
Pins
Arrangements
SL102M
SL103M
SL104M
SL105M
2
3
4
5
1
2
3
4
SL173M
SL174M
SL175M
3
4
5
2
3
4
SL FEMALE RECEPTACLES
SL FEMALE RECEPTACLES
Contact
Contact
Part Number
Contacts
Arrangements
Part Number
Contacts
Arrangements
SL172F
SL173F
SL174F
SL175F
2
3
4
5
A
B
C
D
SL102F
SL103F
SL104F
SL105F
2
3
4
5
A
B
C
D
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
64 SLIM-LINE CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
SLIM-LINE CONNECTORS (continued)
SL18 RECEPTACLES
Front of Panel Mount
INSTALLING CABLE CLAMP ON INSERT
To install cable clamp on any insert:
1. Position insert approximately as shown in the diagram.
2. Hold clamp at approximately 30° angle (as shown). Place
tip of clamp center finger into slot under molded ring “A”.
Note position of notch on insert in relation to slot.
3. Press center finger forward into slot and reduce angle of
clamp until clamp shoulders seat just ahead of molded
barrier on rear of insert “B”.
SL183FS (typical)
Cable Clamp SL04
MOLDED
.696
PANEL HOLE
(17.7)
CABLE
CLAMP
RING
“A”
NOTCH
ON
INSERT
INSERT
“B”
Front of panel mount; 2 through 5 pins (male) or 2 through
5 contacts (female). Also 2-, 3- and 4-contact insert with
3 shunted (N.C.) contacts. Mounting locknut (Part Number
SL01), lockwasher (Part Number SL02), and flat washer
(Part Number SL03) supplied.
SL MALE RECEPTACLES
Pin
Part Number
Pins
Arrangements
SL182M
SL183M
SL184M
SL185M
2
3
4
5
1
2
3
4
SL FEMALE RECEPTACLES
Contact
Part Number
Contacts
Arrangements
SL182F
SL183F
SL184F
SL185F
2
3
4
5
A
B
C
D
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
AUDIO CONNECTORS
65
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
CB CONNECTORS
Miniature 3 and 4 circuit connectors for microphone connections in
mobile/communications equipment. Cord plug has silver-plated
copper alloy contacts, large cable clamp, and strain relief spring.
CB-3F
CB-3F 3-contact female cord plug. Knurled coupling ring has
internal metric M16x1 thread. Solder lug terminals accept wires
up to #18 AWG. Accommodates cables up to .281" (7.14 mm)
diameter.
CB-4F Same as CB-3F. except 4 contacts.
CB-3M 3-pin male receptacle. Housing keys insert of mating plug;
bushing with external M16x1 metric thread mates with coupling ring
on plug. Cup-type terminals accept wires up to #16 AWG. Mounts
in .64" (16.26 mm) diameter hole from front of panels up to .125"
(3.18 mm) thick, using washer and locknut supplied. Can also be
“D”-hole mounted for non-turn mounting (see drawing).
Pin diameter. is .093".
CB-3M
CB-4M Same as CB-3M, except 4 pin.
Dimensions, In. (mm)
Insert
Part No.
Contacts
Length
Diameter
.703 (17.86)
.705 (19.05)
CB3F
CB3M
3
3
1.594 (40.49)
.781 (19.84)
MICROPHONE CONNECTORS
Connectors with 5/8-27 threads are designed for use with single
conductor microphone cable with .281" (7.14 mm) maximum
outside diameter. 44 adapts 2501F to fit standard 2-conductor
phone jack. Coupling ring on 2501F is removable for fast change
from female to male type. Spring assembled into body, cable braid
and spring clamped by hollow set screws .281" (7.14 mm)
maximum cable diameter. 2501MP mounts in .390" (9.92 mm)
diameter hole.
44
2501M
2501F
2501MP
MINI-CON MINIATURE CONNECTORS
Approximately 1/2 the size of standard microphone connectors.
Ideal for miniature lapel microphones, musical instruments and
wherever small cable is used. Accepts single-conductor shielded
cable up to .187" (4.76 mm) diameter Coupling ring on 5501F
removable for quick change of female to male type. Cable is braid
spring clamped to body by hollow point set screw.
5501F
5501M
Mounting Hole,
Part Number
5501F
Description
Female Plug
Male Plug
Inches (mm)
—
—
◊5501M
.375 (9.52)
(Front of panel)
◊5501MF
Receptacle
Receptacle
.375 (9.52)
(Front of panel)
5501MP
5501MF
5501MP
◊Available on special order; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
66 BNC CONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
HP75BNC SERIES BNC CONNECTORS
Switchcraft Inc. introduces a complete line of true 75 Ohm BNC cable
mount connectors. This new series was developed for the broadcast
industry, or wherever true 75 Ohm impedance BNC's are used. The
HP75BNC Series is available in a wide range of styles, to
accommodate the most popular types of coaxial cables. All are crimp
terminated using standard crimping tools.
FEATURES AND BENEFITS
• True 75 Ohm impedance
• Gold-plated center pins for increased life
• Available for a wide range of cable types
• Outstanding electrical performance
• Rugged nickel-plated, machined shells
SPECIFICATIONS
Electrical
Characteristic Impedance: 75 Ohms
Voltage Rating: 500 Volts RMS
Return Loss: Less than -25 db at 3 GHz
Insulation Resistance: 5000 Megohms min
HP75BNC9
MECHANICAL
Lifecycles: 500 min
Center Contact Retention: 6 lbs. min
Coupling Mechanism: 100 lbs. min
Force to Engage: 2.5 lbs. max
ENVIRONMENTAL
Thermal Shock: -65° C to 165° C
Moisture Resistance: Mil Std 202
Corrosion: Mil Std 202
Flammability: UL 94-VO
Vibration: Mil Std 202
Solvent Resistance: Mil Std 202
FINISH
Body/Bayonet: Nickel-plated copper alloy
Center Conductor: 50 mi gold-plated copper alloy
ORDERING INFORMATION
Part Number
Cable Type
HP75BNC1
HP75BNC2
HP75BNC6
HP75BNC7
HP75BNC9
HP75BNC10
HP75BNC12
Belden #8241
Belden #8281B
Belden #1695A
Belden #1694A
Belden #1505A
Belden #1506A
Belden #1855A
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
BNC CONNECTORS
67
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
HP75BNC SERIES BNC CONNECTORS (continued)
S
11
log MAG
REF -15 dB
5 dB / DIV
3.0
GHz
1.5
GHz
.30
MHz
RETURN LOSS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
68 EAC RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
EAC RECEPTACLES
SERIES EAC
Two and three-pin/contact grounding primary power Receptacles are designed for use in European and domestic
receptacles are designed to meet EN 60 320, as well as instrumentation, power rack mounted devices, test equipment
applicable UL, CSA, VDE and other specifications. and appliances. Three-pin male receptacles have .125" (3.18
Receptacles feature choice of short, standard or long solder mm) longer center (ground) pin. Ground circuit is established
lugs or FASTON ® terminals. Receptacles snap-in or screw before power circuits “make”, and is maintained until after power
mount from the front or rear of panel. Receptacles have circuits “break”.
orbitally riveted lugs (except EAC233, EAC305, EAC323
EAC325, EAC333, EAC405) for superior mechanical/electri-
cal connections. Extended socket versions permit minimum
behind-panel depth.
EAC227
EAC311
EAC305
EAC323
EAC325
EAC309
EAC333
EAC333S
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
EAC RECEPTACLES 69
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EAC RECEPTACLES (continued)
EAC305—3-contact female receptacle. Front mount with
two, #4 screws or .094" (2.38 mm) diameter rivets
(not supplied).
SERIES EAC
EAC309—3-pin male receptacle with standard lug terminals.
Mounts from front or rear of panel with two, #5 screws or
.125 " (3.18 mm) diameter rivets (not supplied).
EAC311—3-pin male receptacle with FASTON® terminals.
Mounts from front or rear of panel with two, #5 screws or
.125 " (3.18 mm) diameter rivets (not supplied).
◊EAC315—3-pin male receptacle with long solder lug terminals.
Mounts from front or rear of panel with two, #5 screws or .125"
(3.18 mm) diameter rivets (not supplied).
EAC405
◊EAC319—3-pin male receptacle with short solder lug
terminals. Mounts from front or rear of panel with two,
#5 screws or .125" (3.18 mm) diameter rivets (not supplied).
SPECIFICATIONS
ELECTRICAL
Insulation Resistance: 2 million megohms @ 500 V DC.
Dielectric Strength: 1500 V (rms).
◊EAC323—3-pin male receptacle with short solder lug terminals.
Extended socket housing (mounting flange on rear of receptacle)
provides more behind panel clearance. Mounts with two,
#4 screws or .094" (2.38 mm) diameter rivets (not supplied).
Arcing Test: Meets UL 498 Standard.
EAC325—3-contact female receptacle with short solder lug
terminals. Extended housing (mounting flange on rear of
receptacle) provides more behind panel depth. Mounts with two,
#4 screws or .094" (2.38 mm) diameter rivets (not supplied).
MECHANICAL
Solderability Standard: Meets MIL-STD-202, method 208,
EIA RS-186-9E.
ENVIRONMENTAL
EAC327—3-pin male receptacle, similar to EAC319 except
with standard solder lugs.
Thermal Range: -55° C to +65° C (except EAC45x series).
Salt Spray: Meets MIL-STD-202, method 101; EIA-RS-186-5E,
method 5.
EAC333—3-pin, 10A, 250V male receptacle with right-angle
housing for PC mount. PC terminal and hole mounting details
are the same as for EAC233. Ground pin is integral with
ground solder lug on rear of receptacle.
MATERIAL
Shell: EAC307 through EAC327. Black polyester. EAC303,
EAC307 through EAC315. UL flammability rating of UL94 V-0,
yellow card #E45575.
◊EAC333S—Similar to EAC333, but with two, snap-in
retainers through mounting flanges for PC mount.
EAC309 through EAC327, EAC333. Black polyester, UL
flammability rating of UL94 V-0, yellow card #E45575.
◊EAC405—3-contact female receptacle with standard solder
lug terminals. Snap-in panel mounting.
EAC233, EAC233S, EAC305, EAC325, and EAC333S. Black
polycarbonate, UL flammability rating of UL94 V-0, yellow
card #E45329.
EAC409—3-pin male receptacle with standard solder lug
terminals. Snap-in panel mounting.
EAC411—3-pin male receptacle with FASTON terminals.
Snap-in panel mounting.
EAC323, EAC409 through EAC411 Black polycarbonate, UL
flammability rating, or equivalent UL94 V-0, yellow card
#E33640, or equivalent.
EAC413—3-pin male receptacle with FASTON terminals on
LINE and NEUTRAL and a solder lug on EARTH GROUND.
Snap-in panel mounting.
Pins, Contacts and Terminals: Plated copper alloy.
◊EAC227—2-pin male receptacle with standard solder lug
terminals, similar to EAC327.
EAC451—3-contact female receptacle with straight PC
terminals for use in “HOT” applications. Snap-in panel mounting.
◊EAC233—2-pin, male receptacle with right-angle housing
for PC mount. PC terminals project .130" (3.3 mm) to extend
through PC board. Rear of panel mount. Two, .136 " (3.45
mm) diameter holes permit fastening to PC board; two
additional .136" (3.45 mm) holes are for fastening to panel or
chassis, if required.
EAC453—Same as EAC451 except with solder lug
terminations.
EAC455—Same as EAC451 except with FASTON
terminations.
EAC457—Same as EAC451 except with FASTON power
terminations and solder lug ground termination.
◊EAC233S—Similar to EAC233, but with two, snap-in
retainers through mounting flanges for PC mount.
◊ Available on special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
70 EAC RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
SERIES EAC (continued)
Pins/
Switchcraft
Mating Number 3
Part Number
Contacts 1
Mounting 2
Terminals
Listings
UL
Ratings
Comments 4
◊EAC227
M
Front or Rear
Solder Lug
15 A, 250 V AC
P2392
—
CSA
UL, CSA,
VDE
15 A, 250V AC
10 A, 250 V AC
Semko, Demko, Nemko,
SETI, and SEV Approved
◊EAC233
◊EAC233S
◊EAC305
◊EAC309
◊EAC311
◊EAC315
◊EAC319
◊EAC323
◊EAC325
◊EAC327
◊EAC333
◊EAC333S
◊EAC405 5
◊EAC409 5
◊EAC411 5
◊EAC413 5
◊EAC4516
◊EAC4536
◊EAC4556
◊EAC4576
M
M
F
Rear
Rear
PC
P2392
P2392
—
UL, CSA,
VDE
15 A, 250 V AC
10 A 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
Semko, Demko, Nemko,
SETI, and SEV Approved
PC
UL & VDE
VDE
Front
Solder Lug
Solder Lug
FASTON
Semko, and SEV Approved
UL & CSA
VDE
Demko, Semko, Nemko,
SETI and SEV Approved
Semko, Demko, Nemko,
SETI and SEV Approved
M
M
M
M
M
F
Front or Rear
Front or Rear
Front or Rear
Front or Rear
Front or Rear
Rear
P2392
P2392
P2392
P2392
P2392
—
UL & CSA
VDE
Semko, Demko, Nemko,
SETI and SEV Approved
UL & CSA
VDE
Solder Lug
(Long)
UL & CSA
VDE
Solder Lug
(Short)
15 A, 250 V AC
—
UL & CSA
VDE
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
Mounting flange on rear
Solder Lug
(Short)
Semko, Nemko, SETI Approved
UL & CSA
VDE
Solder Lug
(Short)
Mounting flange on rear
UL & CSA
VDE
Demko, Semko, Nemko
SETI and SEV Approved
Semko, Demko, Nemko,
SETI, SEV Approved
M
M
M
F
Front or Rear
Rear
Solder Lug
PC
P2392
P2392
P2392
—
UL, & VDE
CSA
Semko, Demko, Nemko,
SETI, SEV Approved
UL & VDE
CSA
Rear
PC
UL & CSA
VDE
Snap-In
Solder Lug
Solder Lug
FASTON
—
UL, & CSA
VDE
Demko, Semko, Nemko,
SETI and SEV Approved
Semko, Demko, Nemko,
SETI and SEV Approved
Semko, Demko, Nemko,
SETI and SEV Approved
M
M
M
F
Snap-In
P2392
P2392
P2392
—
UL, CSA
VDE
Snap-In
UL, CSA
VDE
Solder Lug/
FASTON
Snap-In
UL, & CSA
VDE
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
15 A, 250 V AC
10 A, 250 V AC
Snap-In6
Snap-In6
Snap-In6
Snap-In6
PC
Rated for use up to 120°C
Rated for use up to 120°C
Rated for use up to 120°C
Rated for use up to 120°C
UL, & CSA
VDE
F
Solder Lug
FASTON
—
UL, & CSA
VDE
F
—
UL, & CSA
VDE
Solder Lug/
FASTON
F
—
1 M = Male; F = Female.
2 F = Front; R = Rear. See mounting drawings for mounting details.
3 Also mates with Belden and other standard cords.
4 Semko (Sweden), Demko (Denmark), Nemko (Norway), SETI (Finland), SEV (Switzerland).
5 Receptacles are snap-in mount, and can be ordered to accommodate
.030, .040, .050 and .060 inch panel thickness. For snug fit in panel or
for other specifying assistance, contact Switchcraft.
If you have been using a 15 amp rated Switchcraft EAC connector
ending in an even number, you can now buy an identical part number
that has a 10 amp European rating in addition to the 15 amp UL and
CSA approval. The part number for the new dual rated part is one
less than the old part number (eg. EAC310 becomes EAC309,
EAC412040 becomes EAC411040, EAC234 becomes EAC233,
EAC458050 becomes EAC457050, etc.)
6 Available only for .050 inch and .060 inch panel thickness
◊ Available on special order only; contact Switchcraft for price and delivery.
UL No. E38829—EAC-309 thru -327 UL No. E65081—EAC-305
CSA Guide 365-E-1, Class 6233, File Card No. LR27474
Inch
VDE Certificate of Compliance No. 731 (EAC-305, -325, -405),
DIMENSIONS ARE FOR REFERENCE ONLY
all others VDE approval No. 3181.
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
EAC RECEPTACLES 71
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EAC RECEPTACLES (continued)
SERIES EAC
Front Mount
Front Mount
EAC305
Figure 2
Rear Mount
EAC323
Figure 6
EAC227, EAC309,
EAC311, EAC315,
EAC319, EAC327
Front Mount
EAC323
Figure 4
EAC233, EAC309,
EAC311, EAC315,
EAC319, EAC327,
EAC333
Figure 7
Front Mount
EAC225
Rear Mount
EAC325
Figure 5
Figure 9
Snap-in Mount
EAC409, EAC411
Snap-in Mount
EAC405, EAC451, EAC453,
EAC455, EAC457
Recommended
PC Board Layout
EAC233, EAC333
Figure 10
Note: Center .07 inch diameter
hole not used for 233, 234
Note: Unless otherwise specified, all dimension tolerances are ± .01" (+0.25 mm)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
EAC RECEPTACLES
72
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
EAC RECEPTACLES (continued)
SERIES EAC
EAC227
EAC233S, EAC333S
Note: Center PIN/Terminals
not used on EAC233S
EAC327
EAC309, EAC315
EAC311
EAC233, EAC333
Chassis/Panel Opening
Recommended PC Board
Layout (Component Side)
Note: Center
.07 inch dia.
hole not
used on
EAC233
Note: Center
PIN/Terminals not
used on EAC233
Note: Unless otherwise specified, all dimension tolerances are ± .01" (+0.25 mm)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
EAC RECEPTACLES 73
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EAC RECEPTACLES (continued)
SERIES EAC
EAC319, EAC327
EAC323
EAC325
EAC405
EAC409
EAC411
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
EAC RECEPTACLES
74
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
EAC RECEPTACLES (continued)
SERIES EAC
EAC413
1.065
27.05
0.875
REF
[
]
[
]
22.23
1.260
MAX
[
]
32.00
1.220
± .010
30.99 ± .25
1.079
± .004
27.41 ± .10
[
[
]
]
0.955
± .008
24.26 ± .20
[
]
0.157R
]
[
3.99
0.079
[
]
2.01
+ .005
- .008
+ .12
- .20
0.640
± .009
16.26 ± .22
0.940
0.779
± .004
19.79 ± .10
[
]
23.88
[
]
[
]
0.079
[
]
2.01
.078 x .157
1.98 x 3.99
[
]
0.276
[
]
7.01
0.276
[
]
7.01
0.760
19.30
[
]
0.032
[
]
0.81
0.281
[
]
7.14
0.160
[
]
4.06
1.130
MAX
28.70
1.030
MAX
0.490
12.45
0.610REF
“E”
[
]
[
]
0.806
± .008
20.47 ± .20
0.656
16.66
[
]
26.16
[
]
[
]
15.49
[
]
+ .008
- .005
0.120
+ .20
- .12
3.05
[
]
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
EAC RECEPTACLES
75
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EAC RECEPTACLES (continued)
SERIES EAC
EAC451
RECOMMENDED P.C. BOARD LAYOUT
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
76 EAC RECEPTACLES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
EAC RECEPTACLES (continued)
SERIES EAC
EAC453
EAC455
FAST-ON TERMINAL
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
CONNECTORS & RECEPTACLES
EAC RECEPTACLES
77
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EAC RECEPTACLES (continued)
SERIES EAC
EAC457
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
CONNECTORS & RECEPTACLES
78 POWER INLET SOCKET
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
RAPC322 POWER INLET SOCKET
Switchcraft introduces the RAPC322, an IEC320 inlet
developed as a low power interconnect used in a variety
of applications. The RAPC322 is molded from 94-VO
rated material, is UL recognized, and meets a wide variety
of approvals including CSA and VDE. The RAPC is rated
at 2.5A at 250V. Applications for the RAPC322 include
notebook computers, medical devices, and data
communications products.
FEATURES AND BENEFITS
• Snap-in feet facilitate wave soldering
• Top and side slots allow chassis to captivate connector
• Conforms to EN 60320-1/2
APPLICATIONS
• Appliance Inlet
• Personal Computer
• Data Communications
• Medical Equipment
• Test Equipment
• Instrumentation
SPECIFICATIONS
GENERAL
Curren
SEMKO
Nomin
Tempe
Dielect
MATE
Housin
Male P
PC Ter
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
JACK SCHEMATICS 79
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
JACK SCHEMATICS
Circuit Types: Jacks normally have through circuits, shunt
circuits, and/or isolated switching circuits, either individually or
in various combinations. The chart below shows schematics of
39 common jacks - many more combinations are possible, but
these are the most commonly used. A basic description of the
switching action of each jack accompanies each schematic.
Notation
Meaning
1-A
One, SPST switching circuit. Also known as NO
(normally open) or “make” circuit.
1-B
1-C
1-D
One, SPST switching circuit. Also known as NC
(normally closed) or “break” circuit.
One, SPDT switching circuit. Also known as transfer
or “break” before “make” circuit.
Military Identification: Military specifications covering phone
jacks use a special code to describe jack functions. Jack
schematic descriptions are coded J-1 through J-13 (as
appropriate) to coincide with Federal Item Identification
Guides for Supply Cataloging. One or more groups of suffix
numbers/letters identify isolated switching circuits used.
Suffixes identify the switching by industry recognized notation,
i.e., 1-A, 1-B, 1-C, 1-D, etc. See chart below.
One, SPDT switching circuit. Also known as “make”
before “break” circuit.
NOTE: Number indicates the quantity of circuit - 2-A means 2, A circuits.
Terminals locations shown on jack schematics do not necessarily coincide
with physical locations on jacks. Not all circuit types available on all jacks.
Single open circuit. (J1.)
Single closed circuit,
sleeve common. (J3).
Single closed circuit. (J4).
Double open circuit. (J2).
Single open circuit.
Isolated switching
“make” circuit. (J1-1-A).
Transfer circuit. (J5).
Tip closed, ring
open. (J10).
Tip closed, ring open
(common to sleeve). (J6).
Single open circuit.
Isolated switching
“break” circuit. (J1-1B).
Double closed circuit,
ring common to
sleeve. (J13).
Single closed. Isolated
switching “make”
circuit. (J4-1A).
Double closed
circuit. (J7).
Single closed circuit.
Isolated switching
transfer circuit. (J4-1C).
Double closed circuit.
Isolated switching
“break” circuit. (J7-1B).
Double open circuit.
Isolated switching
transfer circuit. (J2-1C).
Double open circuit.
Isolated switching–
separate “break” and
make circuits (J2-1A-1B).
Single closed circuit
Isolated switching
“break” circuit. (J4-1B).
Single closed circuit–
“make” before
“break”. (J8).
Single open circuit.
Isolated switching
transfer circuit. (J1-1C).
Double open circuit.
Isolated switching
“make” circuit.
(J2-1A).
Double open circuit.
Isolated switching–
separate “make”
circuits on both tip and
ring. (J2-2A).
Double closed circuit.
Isolated switching
“make” circuit on ring
spring. (J7-1A).
Single closed circuit
plus “make” before
“break”. Isolated
switching–“make”
before “break”
Single open circuit.
Isolated switching–
separate transfer and
“make” circuits.
Single closed circuit.
Isolated switching
“break” circuit. Sleeve
common to isolated
switching circuit throw.
(J4-1B).
(J1-1A-1C).
circuit. (J8-1D).
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
JACK SCHEMATICS
80
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
JACK SCHEMATICS
Single closed circuit.
Isolated switching–
“make” before “break”
circuit. (J4-1D).
Tip closed; ring open
circuits. Isolated
switching–two “make”
circuits and one “break”
circuit. (J10-2A-1B).
Single open (tip)
circuit and single closed
(ring) circuit. (J9).
Double jack,
Single open circuit–
“make” before
“break”. (J11).
2-conductors on each
side. Tip circuits cross
shunted; common
sleeve. (J12).
Tip closed; ring closed
circuits. Isolated
switching–“break”
before “make” circuit.
Double closed circuit.
Separate sleeve
“break” circuit.
Single closed circuit.
Isolated switching–
Two “make” circuits.
Single open circuit.
Isolated switching–
Two “make” circuits.
Double open circuit.
Isolated switching–
One “make” and one
“break” circuit.
Double closed circuit.
Isolated switching–
One “make” and one
“break” circuit.
Tip closed; ring open
circuits. Isolated
switching–One
Double closed circuit.
Isolated switching–
Two “make” circuits.
Double open circuit.
Isolated switching–
“break” before
“make” circuit.
“make” circuit.
WIRE-WRAPPING TERMINATIONS
Switchcraft can build complete Jack Panel Assemblies with
jacks, lamp jacks and switches with wire-wrapping terminals. If
desired, components with solder lugs and wire-wrapping
terminals can be installed in the same assembly.
WIRE-WRAPPING CONNECTIONS
Use the chart below as a guide to recommended tools to
be used with varying terminal thickness and wire gauges.
Recommended Wire-Wrapping Tool
WIRE-WRAPPING TERMINAL DESIGN
Terminal
Thickness
(Inches)
(Gardner-Denver Co. Part Numbers)
Jack springs with integral wire-wrapping terminals are made of
special copper alloy for maximum work-life with excellent
resistance to corrosion. Shank of terminal accommodates a
maximum of three wire connections. Tini-Telephone® phone
jacks, lamp jacks and switches with wire-wrapping terminals
have slightly higher stack due to greater spacing required for
wrapping tool access. Actuator springs and ground lug
terminals are .704" long by .060" wide.
Wire
Gauge
22 & 24
24
Use with 14B1-A
Wrapping Bit
500131
Wrapping Tool
Sleeve
.020 thru .032
.016
18840
500131
18840
.016 thru .032
26
37006
17611-2
SPECIFYING NOTE: Due to assembly variations containing components
(solder lugs, wire-wrapping terminals, or both), these Jack Panel
Assemblies are available on special order only. Contact Switchcraft.
JACK MATING DATA
NOTE: See tables for jack/plug mating data
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
81
LONG FRAME TELEPHONE JACKS
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" LONG FRAME TELEPHONE JACKS
JACK MATERIALS
SOLDER LUGS TERMINALS – Lugs project out directly
from rear of jack and are solder-coated for easy wiring and
soldering. Offset lugs can be supplied on special order (except
standard on MT-Jax®). Jacks with offset ground lugs are
particularly suitable for bussing connections on jack
panels. Contact Switchcraft for special order lug requirements.
The complete Switchcraft line of standard size panels,
jacks, plugs, switches and accessories are rugged, premium
quality devices...hand-crafted by experts...100% inspected...
and carefully adjusted to meet the traditionally high quality
demands of the telephone industry and the military. Tightly
controlled incoming inspection, manufacturing methods,
and QC procedures assure you of long-life, reliable components.
Typical applications where Switchcraft components have
been specified for more than five decades are: telephone
central office equipment, switchboards, jackfields, test
and patch panels, and station equipment; TV and radio
broadcasting consoles; PA and communication consoles;
telegraph systems and apparatus; multichannel video and
audio patching; and data processing equipment, such as
computers, telemetry, I/O devices and facsimile.
STRAIGHT
OFFSET
SOLDER LUGS
SOLDER LUGS
WIRE-WRAPPING TERMINALS
–
Wire-wrapping
FRAMES – Jack frames are heavy steel, formed and
press welded for added strength. Side member adds to
frame rigidity and resistance to shock and vibration. Both
“A” and “C” type frames can be supplied. (See next page.)
eliminates the need for soldering. Each terminal accepts up to
three wrapped wires (22 or 24 gauge, 5 wraps each), applied
with standard wire-wrapping tools. Terminal base has
standoff shoulder which prevents first wrapped wire from
accidentally sliding down and shorting against another
terminal or adjacent spring. Terminal tips are radiused to facilitate
positioning of wire-wrapping tool over terminals. See page 80 for
wire-wrapping data.
SPRINGS – A special copper alloy is used for leaf springs
because it offers excellent mechanical and electrical
characteristics, and good corrosion resistance. The spring
alloy has special hardness and ductility, and springs are
produced from custom-designed dies. Although normally
adjusted to mate with telephone (and MIL-type) plugs, springs
can be adjusted to mate with commercial phone plugs.
WIRE-WRAPPING
TERMINALS
BUSHINGS – Bushings are copper alloy (except insulated
jacks), drilled to accept either a standard (.250" diameter
finger) plug or a popular smaller (.206" diameter finger)
plug. Series M Hi-D Jax® have a threaded brass bushing, or a
molded thermoplastic bushing for insulated mounting.
PRINTED CIRCUIT TERMINALS – Components can be
supplied with printed circuit terminals on special order. Terminals
can be specified in various lengths to accommodate different
thicknesses of single and double sided boards, as well as
multilayers, and flat flexible cable and circuitry.
CONTACTS – Jack design includes “wiping” action of
contacts for low resistance connections. The contacts
supplied depend on the jack selected. Gold or silver plating is
normally offered as an option on tip, ring and/or sleeve springs.
Several precious metals and shapes are used on jacks.
PRINTED CIRCUIT
TERMINALS
(SPECIAL)
Material
Shape
Description
Palladium
Welded
Best overall combination of life,
current carrying, and resistance
to environment. Also known as
WEco #2.
Crossbar
OTHERTERMINALS – Many other special terminal styles are
possible. For example, where mounting permits, jacks can be
supplied with stacks having right-angle terminals. Contact
Switchcraft for special terminals.
Fine silver
Riveted,
Carries higher current than
palladium.
button-type
Welded
Gold alloy
Crossbar
Recommended for dry circuit
Excellent resistance to
corrosion and contamination.
Also known as WEco #1.
Heavy currents.
switching.
CUSTOM COMPONENTS
Only the most popular types of jacks are listed.
Fine silver
(Large)
Gold or
Silver
Riveted,
button-type
Plating
For lower contact resistance
(used on through circuit springs).
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
LONG FRAME TELEPHONE JACKS
82
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MT-Jax® jacks Numbers ◊MT-342B and ◊MT-344B have
shorter bushings, 0.5" long with a hold inside diameter of
.21". They will mate with MIL plug M642/5-1 or M642/8-1.
M642/5-1 plug (Switchcraft 480) cannot be used with
◊MT-342B or ◊MT-344B if these jacks are mounted on standard
.625" thick panels. The short jack bushings are recessed
.125", and the M642/5-1 is too wide to fit in the panel recess.
Use plug M642/8-1 (Switchcraft 484) with a narrower
diameter to fit in the recess and mate properly.
LONG FRAME TELEPHONE JACKS
MT-Jax®
(“A” Frame)
XMT-Jax®, Number
XMT-332A
MT-Jax®
(“C” Frame)
CONTACTS – Contacts on shuts and isolated switching
circuits are welded crossbar palladium. Welded crossbar gold
alloy contacts (WEco #1) are available on special order for dry
circuit applications.
SPECIFICATIONS
Frame and Stack Screws: Plated steel, with iridescent
iridite finish.
Springs: Copper alloy, spring tempered. Solder lugs are tinned.
Bushings: Plated copper alloy standard. Natural brass finish
optional.
Insulation: Rigid plastic spacers (MIL-type PBE-P per
Specification LP-513). One piece molded through stack.
Contacts: Welded crossbar palladium contacts in shunt and
isolated switching circuits are standard. Gold alloy (WEco #1)
and fine silver are available on special order.
WMT-Jax®, Number
WMT-332B
YMT-Jax®, Number
YMT-332B
Details of Typical Buss Wiring of Jacks
with Offset Ground Lugs
Ground Lug “Toward”
Frame (Y Offset)
MECHANICAL
Life: Commercial jacks: 10,000 insertion/withdrawal cycles, minimum.
Military Jacks: 20,000 insertion/withdrawal cycles, minimum.
Mechanical Shock: Military Jacks – Per MIL-STD-202,
method 213, Test Condition H (75g).
Buss Wire
Between
Rows
Vibration: Military Jacks – Per MIL-STD-202, method 213, (10-55 Hz).
ELECTRICAL
Buss Wire
Outside of
Rows
Contact Resistance: Commercial Jacks – .030 ohms
maximum (initial), .050 ohms maximum (after humidity, durability
exposure). Military Jacks – .010 ohms maximum (initial), .020
ohms maximum (after life), .10 ohms maximum (after salt spray).
Ground Lug
“Toward” Frame
Ground Lug “Away”
from Frame (X Offset)
Long frame jacks are designed especially for high quality
communication equipment, and to meet exacting MIL
specifications, as well as telephone and communication systems.
Many jacks have WEco equivalent types. MT-Jax® phone jacks are
offered in four styles: MT-Jax®, WMT-Jax®, XMT-Jax® andYMT-Jax®.
Rugged steel frames are produced in specially designed dies,
press welded to provide rigidity and dimensional stability required
by telephone and communication jack panels - and to meet MIL
frame strength tests. “A” and “C” frame styles are available.
Insulation Resistance: Commercial Jacks – 10,000 MΩ
minimum (initial), 1,000 MΩ minimum (after humidity). Military
Jacks – 10,000 MΩ minimum (initial), 1,000 MΩ minimum (after
humidity, durability exposure).
Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC.
ENVIRONMENTAL
Thermal Range: Commercial Jacks – -55°C to +85°C
(non-operating); -20°C to +65°C (operating). Military Jacks -
-55°C to +85°C (non operating); -40°C to +65°C (operating).
Thermal Shock: Commercial Jacks – Per MIL-STD-202,
method 107. Military Jacks – Per MIL-STD-202, method 107.
Humidity: Commercial Jacks – Per MIL-STD-202, method
106. Military Jacks – 0% to 95% operating and non-operating.
Salt Spray: Commercial Jacks – Per MIL-STD-202, method
101. Military Jacks – Per MIL-STD-202, method 101 (48 hours).
Moisture Resistance: Military Jacks – Per MIL-STD-202,
method 106 (240 hours).
TERMINALS – Solder Lug: All MT-Jax® have solder lug termi-
nals. Wire-Wrapping Terminals: WMT-Jax® have wire-wrapping ter-
minals. Offset Ground Lugs: XMT-Jax® and YMT-Jax® have ground
lugs, which simplify production line wiring time. A single row of
jacks can be installed with a single buss wire connected to all
ground lugs in a row, or when double rows are mounted on .625"
vertical centers with lugs oriented between rows, holes in ground
lugs line up so a single buss wire provides connections for both
rows. XMT-Jax® have ground lugs oriented away andYMT-Jax® are
oriented toward jack frame. See illustration.
ORDERING – Order jacks by part number. Additional variations
in jacks are available on special order. Special circuitry, frames,
contacts, natural brass bushings, as other terminals are available.
MIL STANDARDIZATION – MIL jack types listed have been
adjusted for use with plugs specified in Amendment No.1, MIL-P-642,
usually M642/1-1, M642/1-2, M642/2-1, M642/2-2, M642/4-1 or
M642/4-2. When applicable, specify the plug you will use; we will
adjust with that plug where the item is not a MIL-type. NOTE:
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
LONG FRAME TELEPHONE JACKS
83
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" LONG FRAME TELEPHONE JACKS
®
MT-JAX (with WEco Equivalent Jacks)2
Sche- Dim. “X”
matic maximum
Circuit* Inch (mm)
Sche- Dim. “X”
matic maximum
Circuit* Inch (mm)
Switchcraft
Part Number
WEco
Equiv.
MIL
Type1
Mating
Plug3
Switchcraft
Part Number
WEco
Equiv.
MIL
Type1
Mating
Plug3
2-CONDUCTOR 2
3-CONDUCTOR
IV
MT331
233A,
221E3
223C
223AM
223CM
232A,
544A4
232C
218A
218C
303A
215A
215C
237A
237C
225A,
234A
225C,
234C
216A
216C,
484C5
217A
217C
226A
226C
236A
236C
438A
438C
411A
411C
394C
218J
MT332B
238A
M641/3-1
.562 (14.3)
.562 (14.3)
.562(14.3)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.578 (14.7)
.578 (14.7)
.562 (14.3)
.562 (14.3)
.625 (15.9)
.625 (15.9)
.688 (17.5)
.688 17.5)
.75 (19.0)
M641/2-8
I
I
I
I
.438 (11.1)
.438 (11.1)
.438 (11.1)
.438 (11.1)
◊CMT332B
WMT332B
◊WCMT332B
MT333B
238C
–
IV
◊CMT331
◊WMT331
◊WCMT331
◊MT332
–
–
–
238AM
238CM
300A
–
IV
–
IV
–
VII
◊MT334B
239A
M641/3-2
XII
–
II
.5 (12.7)
◊CMT334-B
WMT334B
◊WCMT334B
◊MT336
239C
–
XII
◊CMT332
MT332A
–
II
.5 (12.7)
239AM
239CM
241A
–
XII
M641/2-3
III
III
XVIII
V
.5 (12.7)
–
XII
◊CMT332A
◊MT332C
MT333
–
.5 (12.7)
M641/3-4
XX
M641/2-1
.562 (14.3)
.469 (11.9)
.469 (11.9)
.625 (15.9)
.625 (15.9)
◊CMT336
241C
–
XX
M641/2-6
◊WMT33610
◊WCMT336
◊MT336A10
◊CMT336A
◊WMT336A
◊WCMT336A
◊MT336B10
◊CMT336B
MT336C10
241AM
241CM
242A
–
XX
◊CMT333
◊MT333E
◊CMT333A
MT334A
–
–
–
V
–
XX
M642/2-1
or
IX
IX
M641/5-5
XIV
XIV
XIV
XIV
XXI
XXI
XXII
XXII
XXII
XXII
XXXI
XXXI
XXXI
XXXI
XXXII
XXXII
XXVII
XXVII
IV
M642/4-1
M642/4-2
or
242C
–
M642/2-2
242AM
242CM
285A
–
–
XI
.562 (14.3)
–
.75 (19.0)
M642/4-3
◊CMT334A
M641/3-6
.812 (20.6)
.812 (20.6)
.688 (17.5)
.688 (17.5)
.75 (19.0)
–
XI
.562 (14.3)
.625 (15.9)
285C
–
MT334C
◊CMT334C
M641/2-5
XVII
240A
M641/3-3
◊CMT336C
◊WMT336C10
◊WCMT336C
◊MT336D10
◊CMT336D
◊WMT336D10
◊WCMT336D
◊MT338
◊CMT338
◊MT33910
◊CMT339
◊MT342B
240C
–
–
XVII
XXV
XXV
XIX
.625 (15.9)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.75 (19.0)
.75 (19.0)
.75 (19.0)
.75 (19.0)
.812 (20.6)
.5 (12.7)
240AM
240CM
280A
–
MT334E
◊CMT334E
◊MT334F
◊CMT334F
◊MT335
◊CMT335
◊MT336E10
CMT336E
◊MT33710
◊CMT337
◊CMT351C
◊MT352A
◊CMT354F
M641/2-7
–
.75 (19.0)
–
–
.75 (19.0)
M641/2-4
280C
–
.75 (19.0)
–
XIX
280AM
280CM
267A
–
.938 (23.8)
.938 (23.8)
.562 (14.3)
.562 (14.3)
.967 (24.6)
.967 (24.6)
.563 (14.3)
–
XIII
–
–
XIII
–
–
XXIII
XXIII
XXIV
XXIV
XXXIII
III
267C
–
M641/1-2
284A6
384C6
246A
M641/3-7
M641/2-9
–
–
M641/1-1
M642/5-1
–
–
–
361C
XXXIV
.75 (19.0)
MT-JAX (WITH WECO EQUIVALENT JACKS)2
*Refer to page 79 and 80 for schematics.
Sche- Dim. “X”
matic maximum
Circuit* Inch (mm)
◊ Special order only; contact Switchcraft.
Switchcraft
Part Number
WEco
Equiv.
MIL
Type1
Mating
Plug3
1. Many jacks are offered with MIL specifications. Other jacks are made of
MIL-spec materials but do not have MIL approval because no MIL type
numbers have been assigned.
3-CONDUCTOR 2
2. MT-Jax have nickel-plated copper alloy bushing. WEco equivalent jacks
have plain copper alloy bushings (except WEco Number 221E, which
has nickel-plated copper alloy bushing).
◊WMT342B
MT344B
246 AM
248A
249A
249C
248E
243C
245A
245C
363A
290C
326C
–
–
–
–
–
–
–
–
–
–
–
IV
.562 (14.3)
.625 (15.9)
.562 (14.3)
.562 (14.3)
.625 (15.9)
.812 (20.6)10
.938 (23.8)10
.938 (23.8)
XII
M642/5-1
◊MT346
XX
3. Mating plugs and patch cords are contained in the catalog.
4. Adjust non-short tip-ring.
◊CMT346
◊MT354B
◊MT35510
◊MT356C10
◊CMT356C
◊MT35710
◊CMT358
◊CMT359
XX
XII
5. Adjusted for plug M642/1-1 or M642/1-2.
6. Actuates differently (insulated “A” off ring instead of tip).
7. Same as MIL type M641/2-3 except with offset ground lug.
8. Same as MIL type M641/3-1 except with offset ground lug.
9. Same as MIL type M641/3-2 except with offset ground lug.
XXXV
XXXVI
XXXVI
M642/5-1
or
M642/2-2
XXXVII .75 (19.0)10
XXXVIII .875 (22.2)
10. When mounted on “A” frames, stacks are too high to fit in standard
panels with .625" horizontal space add prefix “C” to part number
to order jacks with “C” frame.
XXXIX
.75 (19.0)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
LONG FRAME TELEPHONE JACKS
84
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MT-JAX®
MT-JAX®
(Industry Standard – No WEco Equivalent)
(Industry Standard – No WEco Equivalent)
Dim. “X”
maximum
Inch (mm)
Dim. “X”
maximum
Inch (mm)
Switchcraft
Part Number
MIL
matic
Mating
Plug3
Switchcraft
Part Number
MIL
matic
Mating
Plug3
Sche
Sche
Type1
Circuit*
Type1
Circuit*
2-CONDUCTOR2
3-CONDUCTOR2
◊WMT332A
◊WCMT332A
XMT332A
–
III
.5 (12.7)
XMT332B
◊YMT332B
◊CMT333B
◊WMT333B
XMT334B
◊YMT334B10
◊WMT336B
◊WCMT336B
◊MT343B
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
IV
.562 (14.3)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.812 (20.6)
.812 (20.6)
.5 (12.7)
–
III
.5 (12.7)
IV
–
III
.5 (12.7)
VII
M642/2-1
or
◊YMT332A
◊CMT332C
◊WMT332C
◊WMT333
–
III
.5 (12.7)
VII
–
XVIII
XVIII
V
.562 (14.3)
.5 (12.7)
XII
M642/2-2
–
XII
–
.469 (11.9)
.469 (11.9)
.967 (24.6)
.625 (15.9)
.562 (14.3)
.562 (14.3)
.562 (14.3)
.641 (16.3)
.688 (17.5)
.688 (17.5)
.75 (19.0)
.75 (19.0)
.75 (19.0)
.75 (19.0)
.875 (22.2)
.875 (22.2)
.438 (11.1)
XXI
XXI
VII
◊WCMT333
◊MT333A
–
V
–
VI
◊WMT333E
◊WMT334A
◊WMT334C
◊WMT334E
◊WMT334F
◊WMT33510
◊WCMT335
MT335A10
–
IX
◊CMT342B
◊CMT344B
◊WMT344B
◊MT346A10
◊MT346B10
◊MT346C10
◊CMT346C
IV
.562 (14.3)
.625 (15.9)
.625 (15.9)
.688 (17.5)
.812 (20.6)
.688 (17.5)
.688 (17.5)
M642/4-1
M642/4-2
or
–
XI
XII
M642/5-1
–
XVII
XXV
XIX
XIII
XIII
XXVI
XXVI
XXVI
XXVI
XXIII
XXIII
I
XII
–
XIV
XXI
XXII
XXII
M642/4-3
–
M642/5-1
or
–
M642/2-21
–
M641/2-2
*Refer to pages 79 and 80.
◊ Special order only; contact Switchcraft.
◊CMT335A
◊WMT335A
◊WCMT335A
◊WMT336E10
◊WCMT336E
◊CMT341
–
–
–
–
–
–
1. Many jacks are offered with MIL specifications. Other jacks
are made of MIL-spec materials but do not have MIL approval
because no MIL type numbers have been assigned.
2. MT-Jax have nickel plated copper alloy bushing. WEco equiv. jacks
have plain copper alloy bushings (except WEco No. 221E, which has
nickel plated copper alloy bushing).
3. Mating plugs and patch cords are contained in this catalog.
7. Same as MIL type M641/2-3 except with offset ground lug.
8. Same as MIL type M641/3-1 except with offset ground lug.
9. Same as MIL type M641/3-2 except with offset ground lug.
10. When mounted on “A” frames, stacks are too high to fit in standard
panes with .625" horizontal space add prefix “C” to part number
to order jacks with “C” frame.
MT-Jax®, Offset Lugs
MT-Jax® and WMT-Jax®
MT-Jax®,Wire-Wrapping Detail
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
85
LONG FRAME TELEPHONE TWIN JACKS
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" LONG FRAME TELEPHONE TWIN JACKS
SPECIFICATIONS
Frame and Stack Screws: Steel, plated with iridescent
iridite finish.
Springs: Copper alloy, spring tempered. Solder lugs are
solder coated.
Bushings: Nickel-plated copper alloy.
Contacts: Welded crossbar palladium in shunt circuits.
Insulation: Rigid plastic (MIL-type PBE-P, per MIL
Specification LP-513C). Extruded plastic insulating tubing
through stack.
MT389
MT388
ORDERING
Order by part number from table.
Part
Dim. “X” max.
Inch (mm)
WMT389
Number1
Adjusted for Plug
MT388
WEco types 298B and 347B
.562 (14.3)
MIL types M642/9-1 and M642/1-1
◊WMT388 Switchcraft types 411, 412, 413, 420
.562 (14.3)
.594 (15.1)
MT389
WEco type 310
High quality telephone jacks are essentially doubled versions
of MT-Jax®. Twin-Jax® are used in Switchcraft Series 2400,
2600 and JP® Jack Panels and other standard jack panels.
Twin-Jax® have direct WEco equivalents.
MIL types M642/2-1 and M642/2-2
WMT389
Switchcraft types 414 and 482
.562 (14.3)
◊ Special Order only; contact Switchcraft.
1. Number MT388 is equivalent to MIL-type M641/11-1
2. Complete data for telephone and MIL-type plugs are contained in this section.
Mounting Screws: #6-32, Part Number P10725, can be ordered separately.
Contact Switchcraft. (Screws not supplied with jacks).
MT388 AND WMT388
Frame mounting ears are on 1.375" centers, and bushings
are on .625" centers. Jacks are double, 2-conductor type with
a crossover wiring feature. If a mating plug is inserted in
either bushing, crossover contacts are opened (see
schematic). MT388 (solder lugs) is equivalent to WEco jack
410A, 410C and 410D. WMT388 (wire-wrapping) is equivalent
to WEco 410AM.
SCHEMATIC CIRCUITS
MT389 AND WMT389
Double, 3-conductor jacks with both the tip and ring circuits
interconnected (crossover wired) so if a plug is inserted in
either jack, common circuits are opened (see schematic).
MT-389 (solder lugs) is equivalent to WEco 482A. WMT389
(wire-wrapping) is equivalent to WEco 482AM and 482BM.
MT388 and
WMT388
MT389 and WMT389
MT388 and WMT388
MT389 and WMT389
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
JACK BLOCKS
86
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" JACK BLOCKS
DUAL-JAX BLOCK®
ORDERING
Order by part number from table.
Part Number
2300
Description
Block, without jacks.
2331
Two, MT331 MT-Jax installed.
Two, MT332A MT-Jax installed.
Two, MT332B MT-Jax installed.
Two, MT333 MT-Jax installed.
2332A
2332B
◊2333
◊ Special order only; contact Switchcraft for price and delivery.
Mounting Screws: #6-20, P1544, can be ordered separately,
contact Switchcraft.
Dual-Jax Blocks are ideal where limited jack connections are
needed but larger jack panels are not required. Designed for
broadcasting, intercom and PA systems, switchboards, and
commercial, industrial and military communications equipment.
Dual-Jax Blocks mount in panels or chassis, either singularly
or in multiples. Four countersunk holes accommodate four
#8-32 screws (not supplied) for block mounting. Blocks can be
supplied without jacks, or with MT-Jax® installed. Many other
jacks including, T-Jax®, T-Switch® switches and lamp jacks can
be installed. Jacks with wire-wrapping terminals or offset lugs
can also be supplied. By drilling additional holes, Twin-Jax®
may also be used. Contact Switchcraft for any special order items.
SPECIFICATIONS
SERIES 2300
Block: Molded black thermoplastic.
Screws: #6-20 plated steel, QQ-P-416, Type II,
Class 2 (for jack mounting).
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
BANTAM TYPE® JACKS
87
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") TELEPHONE JACKS BANTAM TYPE®
WTT636C
TT36
TT32BDC
TT36FM
THREADED BUSHING
STEEL FRAME
DIE-CAST FRAME
(special order only)
FRONT MOUNT
SWITCHCRAFT VS. MIL NUMBERS
FEATURES
• Steel (standard) or die-cast frames (special order).
• 2-or 3-conductors.
• Palladium crossbar welded contacts are standard in
switching circuits. Fine silver or gold alloy contacts are
available on special order.
• Series TT30, TT30FM and TT600 - solder lugs; Series
WTT-30, WTT30FM and WTT600FM -wire-wrapping terminals.
Bussing solder lugs are available on special order.
• Series TT30 and WTT30 jacks mounts in Series 1600,
A1600, B1600 and C1600 jacks panels.
• Series TT30FM and WTT30FM jacks mount in Series
TT51, TT52, TT55 and TT56 jack panels.
• Series TT600 and WTT600 jacks mount in .25" diameter
holes in panels up to .281" thick. Mounting centers: .438".
• Add “N” for nickel-plated frame and “Y” or for offset solder lugs.
Jack Number
TT32B
MIL Spec. Number
641/19-2
641/19-6
641/19-4
641/19-8
641/19-10
641/19-1
641/19-5
641/19-3
641/19-7
641/19-9
TT32BFM
TT34B
TT34BFM
TT36C
WTT32B
WTT32BFM
WTT34B
WTT34BFM
WTT36C
Part Numbers, Jack with Solder Lugs
Dim. “X”
Max.
Typical
Mating
Series TT30
Series TT30FM
Series TT600
Steel
Schem.1 In (mm)2 Cond. Plug3
Steel
Die Cast
◊TT31DC
◊TT32ADC
◊TT32BDC
Steel
TT31FM
Die Cast
◊TT31FMDC
TT31
TT32A
TT32B
TT32C
TT33
◊TT33B
TT34A
TT34B
TT34C
TT34F
TT35
TT631
I
III
IV
XVIII
V
VII
XI
XII
XVII
XIX
XIII
XX
XIV
XXI
XXII
.422 (10.7)
.406 (10.3)
.578 (14.68)
.422 (10.7)
.578 (14.7)
.484 (12.3)
.547 (13.9)
.578 (14.68)
.547 (13.9)
.609 (15.5)
.609 (15.5)
.609 (15.5)
.625 (15.9)
.703 (17.9)
.625 (15.9)
2
2
3
2
2
3
2
3
2
2
2
3
3
3
3
TT251
TT251
TT253
TT251
TT251
TT253
TT251
TT253
TT251
TT251
TT251
TT253
TT253
TT253
TT253
TT32AFM ◊TT32AFMDC
TT32BFM ◊TT32BFMDC
TT632A
◊TT632B
◊TT632C
◊TT633
◊TT633B
◊TT634A
TT634B
◊TT634C
–
◊TT635
◊TT636
TT636A
–
◊TT32CDC ◊TT32CFM ◊TT32CFMDC
◊TT33DC TT33FM ◊TT33FMDC
◊TT33BDC ◊TT33BFM ◊TT33BFMDC
◊TT34ADC ◊TT34AFM ◊TT34AFMDC
◊TT34BDC
◊TT34CDC
◊TT34FDC
◊TT35DC
TT34BFM ◊TT34BFMDC
TT34CFM ◊TT34CFMDC
–
–
◊TT35FM
◊TT36FM
◊TT35FMDC
◊TT36FMDC
TT36
◊TT36DC
TT36A
TT36B
TT36C
◊TT36ADC
◊TT36BDC
◊TT36CDC
TT36AFM ◊TT36AFMDC
–
–
TT36CFM ◊TT36CFMDC
◊TT636C
Part Numbers, Jack with Wire Wrapping Terminals
Series WTT30 Series WTT30FM Series WTT600
Dim. “X”
Max.
Typical
Mating
Steel
WTT31
Die Cast
◊WTT31DC
Steel
WTT31FM
Die Cast
◊WTT31FMDC
Steel
WTT631
Schem.1 In (mm)2 Cond. Plug3
I
III
.422 (10.7)
.406 (10.3)
.578 (14.68)
.422 (10.7)
.578 (14.7)
.484 (12.3)
.547 (13.9)
.578 (14.68)
.547 (13.9)
.609 (15.5)
.609 (15.5)
.625 (15.9)
.625 (15.9)
2
2
3
2
2
3
2
3
2
2
3
3
3
TT251
TT251
TT253
TT251
TT251
TT253
TT251
TT253
TT251
TT251
TT253
TT253
TT253
WTT32A ◊WTT32ADC WTT32AFM ◊WTT32AFMDC
WTT32B ◊WTT32BDC WTT32BFM ◊WTT32BFMDC
◊WTT32C ◊WTT32CDC ◊WTT32CFM ◊WTT32CFMDC
WTT632A
WTT632B
◊WTT632C
◊WTT633
◊WTT633B
◊WTT634A
WTT634B
◊WTT634C
◊WTT635
◊WTT636
◊WTT636A
◊WTT636C
IV
XVIII
V
WTT33
◊WTT33DC
WTT33FM
◊WTT33FMDC
◊WTT33B ◊WTT33BDC ◊WTT33BFM ◊WTT33BFMDC
◊WTT34A ◊WTT34ADC ◊WTT34AFM ◊WTT34AFMDC
WTT34B ◊WTT34BDC WTT34BFM ◊WTT34BFMDC
VII
XI
XII
–
–
–
–
XVII
XIII
XX
XIV
XXII
◊WTT35
◊WTT36
◊WTT35DC ◊WTT35FM
◊WTT36DC ◊WTT36FM
◊WTT35FMDC
◊WTT36FMDC
◊WTT36A ◊WTT36ADC ◊WTT36AFM ◊WTT36AFMDC
WTT36C ◊WTT36CDC WTT36CFM ◊WTT36CFMDC
◊ Special order only.
1. See schematic diagrams.
2. “X” dimension of die cast frame jacks may be slightly greater.
3. See Mating Plugs Section.
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
BANTAM TYPE® JACKS
88
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") TELEPHONE JACKS BANTAM TYPE®
SPECIFICATIONS
MOUNTING HARDWARE
Frame: Plated (steel or zinc diecast).
Stack Screws: Steel plated.
Bushing: Plated (brass or steel).
Tip and Ring Springs: Copper alloy.
Contact Spring: Copper alloy.
Contacts: Welded crossbar palladium. Other alloys in
various sizes available on special order.
Insulation: Rigid plastic with plastic tubing through
stack assembly.
Series TT30: #3-48 x 1/4"; mounting screws, P10834,
can be ordered separately.
Series TT30FM: Supplied with one #3-48 x 1⁄4" fil.
head machine screw, steel-plated.
Series TT600: Supplied with one P1975, nickel-plated cop-
per alloy locknut, and one S3997, steel, nickel-plated wash-
er.
NOTE: Dimensional drawings show panels with steel frame
jacks. Overall dimensions for steel or die-cast frame jacks
are the same, except as noted.
2-17/32
[64.3]
REF
0.375
[9.5]
REF
B0.115
[2.9]
REF
0.780 5.015
[19.8]
REF
0.281
[7.1]
REF
0.250
[6.4]
REF
0.590 5.015
[14.9]
REF
B0.251
[6.4]
REF
0.650
[16.51]
REF
B0.176
[4.46]
REF
0.035
[.79]
REF
0.279
[7.1]
REF
Series TT32B
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
BANTAM TYPE® JACKS
89
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") TELEPHONE TWIN JACKS BANTAM TYPE®
FEATURES
SPECIFICATIONS
• Steel or die-cast frames. (Special order only).
Frame: Plated (steel or diecast zinc).
Stack Screws: Steel-plated.
Bushing: Plated (steel or copper alloy).
Tip, Ring and Contact Springs: Copper alloy.
Contacts: Welded crossbar palladium. Other alloys in
various sizes available on special order.
• Twin, 3-conductor jacks on .312" centers, inter-connected
so circuit is opened when a mating plug is inserted in one
side of the jack. Palladium welded crossbar contacts are
standard in switching circuits.
• Solder lugs or wire-wrapping terminals.
• TT89, TT89C, WTT89 and WTT89DC jacks mount in
Series 1700 jack panels.
• TT89FM, TT89FMDC, WTT89FM and WTT89FMDC
jacks mount in Series TT59, TT60, TT61 and TT62
jack panels.
Insulation: Rigid plastic with plastic tubing through
stack assembly.
Mounting Hardware: #3-48 x 1/4" mounting
screws, P10834, can be ordered separately for TT89,
TT89DC, WTT89 and WTT89DC jacks. Two mounting
screws, P25424, are supplied with TT89FM, TT89MDC,
WTTFM and WTT89FMDC jacks.
NOTE: Dimensional drawings show panels with steel
frame jacks. Overall dimensions for steel or die-cast
frame jacks are the same.
TT89
SCHEMATIC
Solder Lugs
Wire-Wrapping Terminals
Typical Mating
Steel
TT89
Die Cast
TT89DC
Steel
WTT89
WTT89FM
Die Cast
WTT89DC
Conductors
Plug1
TT263
TT263
◊
◊
◊
Twin
3-conductor
TT89FM
◊
TT89FMDC
WTT89FMDC
1. See Mating Plugs Section.
◊ Special order only
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
90 BANTAM TYPE® JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") TELEPHONE TRIPLE JACKS BANTAM TYPE®
FEATURES
• Steel or die-cast frames.
• TT95 Tri-Jax® Jacks: three, 3-conductor jacks on one
frame. Twin jacks, (on .312" centers, LINE & EQUIPMENT
functions), have strapped shunts installed. The third jack
(MONITOR) is unwired. See TT95 schematic.
• TT96 Tri-Jax Jacks: Same as TT95 jacks, except third
jack (MONITOR) has tip and ring springs, respectively,
TT95 SCHEMATIC
jumpered to tip and ring springs of top (LINE) jack.
• Selection of solder lugs or wire-wrapping terminals.
• Palladium welded crossbar contact are standard in
switching circuits.
• TT95, TT95DC, WTT95 and WTT95DC jacks mount in
Series B1700 jack panels.
• TT95FM, TT95FMDC, TT96FM, TT96FMDC and
wire-wrapping versions mount in Series TT53, TT54,
TT57 and TT58 jack panels.
TT96 SCHEMATIC
◊ Special order only
Mounting Hardware: #3-48 x 1/4" mounting screws,
P10834, can be ordered separately for rear mount jacks.
Two mounting screws, P25424, are supplied with front
mount jacks.
SPECIFICATIONS
Frame: Plated (steel or diecast)
Stack Screws: Stainless Steel Plated.
Bushings: Plated (steel or copper alloy).
Contact Springs: Copper alloy.
Contacts: Welded crossbar palladium. Other precious metal
alloys in various sizes available on special order.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
MINIATURE TELEPHONE JACKS 91
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MINIATURE TELEPHONE JACKS, RIGHT ANGLE, PC MOUNT
RTT34B02
COVER P286302
CLOSE-UP OF
“Snap-In”
TERMINAL
LOW SILHOUETTE
PERMITS CRITICAL
SPACE-SAVING HIGH
RTT8702
DENSITY PACKAGING
COVER P286402
ORDERING INFORMATION
Right-angle miniature phone jacks provide low-profile
packaging. Single and twin 3-conductor jacks provide
plug-jack access to communication circuits for patching
and/or testing. Tips and rings are shunted. These jacks
mate with Switchcraft miniature TT® plugs and patch cords.
Jack
Cover
Typical
Part No.
Part No.
Color
Schem.
Cond. Mating Plug2
RTT34B01 ◊P286301
RTT34B02 P286302
RTT34B04 ◊P286304
RTT34B05 P286305
Red
Black
Blue
Jacks are designed for right-angle mounting on .062"
(1.6 mm) maximum thickness PC boards. Snap-on covers in
colors are available and can be installed or removed in the
field without special tools. Covers and jacks may be
ordered in different colors for color coded circuits.
XII
3
TT-253
White
◊RTT34B07 ◊P286307 Orange
◊RTT34B08 ◊P286308
Yellow
SPECIFICATIONS
ELECTRICAL
Dielectric Withstanding Voltage: 500 V AC
Contact Resistance: .020 Ω maximum (initial),
.030 Ω maximum (after life test).
Insulation Resistance: 1010 Ω at 500 V DC (initial).
RTT8701
RTT8702
RTT8704
RTT8705
◊RTT8707
◊RTT8708
◊P286401
P286402
◊P286404
P286405
Red
Black
Blue
Twin
XII
Twin
3
TT-263
White
◊P286407 Orange
◊P286408 Yellow
MECHANICAL
1. See schematic diagrams on pages 79 and 80.
2. See Mating Plugs Section.
◊ Special order only; contact Switchcraft for price and delivery.
Shock: MIL-STD 202 Method 213.
Vibration: MIL-STD 202 Method 201.
Insertion Force: 7 pounds maximum (31.14 N).
Withdrawal Force: 1.5 pounds minimum (6.67 N).
Life: 10,000 cycles.
ORDERING
1. Order jacks and covers separately from table.
2. Covers can be ordered assembled on special order.
3. To order RTT jack with cover installed, add the letter C
after RTT in part number. Special order only.
4. To order RTT jack with Snap-in terminals, add the
letter S to the end of the part number. Special order only.
5. For all special orders items, contact Switchcraft.
MATERIALS
Housing: Thermoplastic UL 94V-0.
Springs: Copper alloy, plated.
Contacts: Gold alloy (WEco #1) crossbar.
ENVIRONMENTAL
Temperature Limits: -55°C to +85°C
(non-operating).
RTT JACK PART NUMBERING SYSTEM
Thermal Shock: MIL-STD 202 Method 107.
Salt Spray: MIL-STD 202 Method 101.
Humidity: MIL-STD 202 Method 106, less
steps 7A and 7B.
Series
Cover Option
Circuitry
Jack Color
RTT Right
Angle TT Jack
Blank- No Cover
Standard
34B-
XII
01-
02-
Red
Two XII
Circuits
C-
Cover Supplied 87-
Black
04-
05-
07-
08-
Blue
White
Orange
Yellow
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
92
MINIATURE TELEPHONE JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MINIATURE TELEPHONE JACKS, RIGHT ANGLE, PC MOUNT (continued)
RECOMMENDED
PCBOARD LAYOUT
No. RTT34B (Less cover)
No. P2863 Cover
No. RTT87 (Less cover)
RECOMMENDED
PC BOARD LAYOUT
No. P2864 Cover
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
ENCLOSED JACKS 93
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
.177" ENCLOSED JACKS
Two- and 3-conductor Unijax® jacks have advanced features
of Hi-D Jax® jacks including chassis/panel and PC mounting
and .177" bushing that mates with a variety of tini-telephone®
plugs and patchcords. Bushing diameter is .281" inside
diameter; panel thickness is .125". Mounts in rows or arrays
on .469" centers.
UJ4B
SPECIFICATIONS
MECHANICAL
Insertion/Withdrawal: 2-conductor, 1.25 pounds nominal,
3 pounds maximum insertion. 3-conductor, 1.5 pounds nominal,
3 pounds maximum insertion. 2-conductor, 3 pounds nominal,
1.5 pounds minimum withdrawal. 3-conductor, 3 pound nominal,
1.5 pounds minimum withdrawal.
Life: 10,000 insertion/withdrawal cycles minimum.
ELECTRICAL
Contact Resistance: .10 ohms maximum.
Insulation Resistance: 1,000 MΩ minimum.
Dielectric Withstanding Voltage: 500 V AC maximum.
MATERIAL
Housing: Thermoplastic.
Mounting Bushing: Nickel-plated copper alloy.
Tip and Ring Springs: Copper alloy, silver-plated.
Integral contacts.
Shunt Springs: Copper alloy, silver-plated
integral contacts.
Sleeve Terminal: Steel, tin-plated.
Hardware: Supplied with one, Number P2060
nickel-plated copper alloy locknut, and one,
Number P2061 nickel-plated copper alloy washer.
TWO CONDUCTOR PART NUMBERS
Jack
Typical
Mating
Plug2
Part
Number
Schematic1
Description
I
Open circuit
UJ1
TT251
TT251
III
Single closed circuit
UJ2A
THREE CONDUCTOR PART NUMBERS
TT253
TT253
UJ2B
UJ4B
Double Open circuit
Double closed circuit
IV
XII
1. See jack schematics on pages 79 and 80.
2. See Mating Plugs Section.
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
94 LITTEL-JAX® 2- AND 3- CONDUCTOR
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
PREFIX OPTIONS
SERIES
1-Littel Jax®
CIRCUITRY
1-
1/4" PHONE JACKS
Blank- 1/4" Commercial Jack
I
C-
Accepts Mill Plug
2A- III
2B- IV
PC-12A
14B
FA-
FAL-
.205" Faston Terminals
.205" Faston Terminals
and .375" Long Bushing
3-
V
L-
.375" Long Bushing
PC Terminals
3A- VI
3B- VII
3E- IX
4B- XII
PC-
S-
Accepts .206 Diameter Plugs
TWO CONDUCTOR PART NUMBERS
11
FAL-11
Typical
Mating
Plug
.205 FASTON
TERMINAL
Jack
Part
Schematic1
Number
Description
Open circuit
LITTEL-JAX® COMMERCIAL PHONE JACKS
2- AND 3-CONDUCTOR
I
I
I
I
250
440
250
250
11
C11
MIL Number M641/6-1
Littel-Jax phone jacks mate with standard commercial phone
plugs and are available with .25" and .21" inside diameter
bushings.
FA11
FAL11
.205 inch FASTON terminal
.375 inch long bushing
.205 FASTON terminal
I
250
250
440
250
250
250
250
250
L11
.375 inch long bushing
Tip shunt
MIL LITTEL-JAX® PHONE JACKS
2- AND 3-CONDUCTOR MIL-SPEC, MIL-J-641 (E)
MIL jacks mate with MIL-type phone plugs with .25" (6.35mm)
or .21" (5.34mm) diameter bushings. Numbers C11 and C12B
have a non-turn locating pin which keys the jack to the
mounting surface. For low contact resistance applications,
jack number C12A has fine silver contacts on shunts and
tip springs.
III
III
III
III
V
12A
C12A
L12A
MILNumber M641/12-1
.375 inch long bushing
PC12A PC board mount
13
Isolated “make” circuit
Transfer circuit
VI
IX
13A
13E
Isolated “break” circuit
MOUNTING
Chassis/Panel: See Mounting Data drawing below;
smallhole is required only for jacks numbers C11 and C12B
with non-turn locating pin.
Maximum Panel Thickness: .156" (4mm) for standard
.276" (7mm) long bushing; .25" (6.35mm) for .375" (9.5mm)
long bushing.
NOTE: For panels thicker than .25" see Thick Panel Phone Jax.
Insulated Mount: See drawing. S1028 flatwasher and
Part Number S1029 shoulder washer must be ordered
separately for mounting in .437" diameter hole.
NOTE: See Hi-D Jax® for jack specifically designed for
insulated mounting without additional washers.
PC Board Mounting: See Recommended PC Board Layout
drawing below for jacks with PC terminals. Recommended
PC board thickness is .062".
Mounting Centers: 1.188" (30mm) recommended. Centers
may vary with jack selected, for example, Number
11 mounts on .813" (20.6mm) and 14B mounts on
1.125" (28.6mm) minimum centers.
THREE CONDUCTOR PART NUMBERS
12B
Double open circuit
IV
IV
267
267
L12B
C12B
.375 inch long bushing
MIL number M641/5-1,
.250 inch inside diameter
IV
VII
XII
480
267
267
13B
14B
Tip shunt
Double closed circuit
PART NUMBERS
(.210" INSIDE DIAMETER BUSHING)
S11
2 conductor
2 conductor
3 conductor
3 conductor
I
S250
S250
S267
S267
S12A
S12B
S13B
III
IV
VII
1. Refer to jack schematics on pages 79 and 80. Other circuits are available;
contact factory.
STEREO JACK
CONNECTIONS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
LITTEL-JAX® 2- AND 3- CONDUCTOR 95
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" PHONE JACKS (continued)
LITTEL-JAX® COMMERCIAL PHONE JACKS - 2- AND 3-CONDUCTOR AND
MIL LITTEL-JAX® PHONE JACKS - 2- AND 3-CONDUCTOR MIL-SPEC, MIL-J-641 (E)
Sleeve Terminal: Copper alloy.
SPECIFICATIONS
Hardware: Supplied with one Number P10001 copper alloy
nickel-plated hex nut, and one Number 51022 steel nickel-plated
washer - except copper alloy nickel-plated washer Number
S10451 supplied on C11, C12A and C12B.
MECHANICAL
Life: Commercial Jacks: 10,000 insertion/withdrawal
cycles, minimum. Military Jacks: 20,000 insertions/
withdrawals, minimum.
*Commercial jacks feature integral contacts. Integral contacts should
not be used where low contact resistance is a requirement.
Mechanical Shock: Military Jacks: Per MIL-STD 202,
method 213, Test Condition H (75g).
Vibration: Military Jacks: Per MIL-STD-202,
method 213, (10-55 Hz).
Littel Jax® Jacks
Insertion/Withdrawal Forces: (see charts below)
COMMERCIAL JACKS
Plug Diameter (inches)
Insertion (maximum)
Withdrawal (minimum)
.210
7 lb.
1 lb.
.250
7 lb.
1 lb.
MILITARY JACKS
Part Number
Insertion (maximum)
Withdrawal (minimum)
Withdrawal (maximum)
C11
C12A
7 lb.
3 lb.
7 lb.
C12B
6 lb.
6 lb.
2 lb.
7 lb.
1.5 lb.
5 lb.
11, L-11, C-11, S-11
*.276" for No. FA-11
FA-11, FAL-11
S-12A, SC-12A
12 12-A, L-12A
S-12A, SC-12A
12A, L-12A
ELECTRICAL
Contact Resistance: Commercial Jacks - .030 ohms
maximum (initial), .050 ohms maximum (after humidity,
durability exposure). Per MIL-STD-202E. Military Jacks -
.010 ohms maximum (initial), .020 ohms maximum (after life),
.10 ohms maximum (after salt spray).
Insulation Resistance: Commercial Jacks - 10,000 MΩ
minimum (initial), 1,000 MΩ minimum (after humidity). Military
Jacks - 10,000 MΩ minimum (initial), 1,000 MΩ minimum
(after humidity, durability exposure).
Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC.
Contact Rating: 1 A, 25 V DC.
PC-12A
12B, C12B
S-12B, SC-12B
13
13A
ENVIRONMENTAL
Thermal Range: Commercial Jacks; -55°C to +85°C
(non-operating); -20°C to +65°C (operating). Military Jacks; -
55°C to +85°C (non-operating); -40°C to+65°C (operating).
Thermal Shock: Commercial Jacks - Per MIL-STD 202,
method 107. Military Jacks - Per MIL-STD 202, method 107.
Humidity: Commercial Jacks - Per MIL-STD 202, method
106. Military Jacks - 0% to 95% operating and non-operating.
Salt Spray: Commercial Jacks - Per MIL-STD 202, method
101. Military Jacks - Per MIL-STD 202, method 101 (48 hours).
Moisture Resistance: Military Jacks - Per MIL-STD 202,
method 106 (240 hours).
13B, S-13B
13E
14B
MATERIAL
Mounting Bushing: Nickel-plated copper alloy.
Insulation: Rigid plastic.
Springs: Special copper alloy. Integral contacts are standard
in the isolated switching circuits; fine silver contacts
in C12A switching circuit.
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
96 ENCLOSED JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" ENCLOSED TELEPHONE JACKS
Series M11*
Series MNS11*
Series MS11*
Series MN11*
Compactly constructed jacks permit direct cross-patching
with Switchcraft, WEco and MIL-type telephone plugs and
patch cords. Series M Hi-D Jax® offer a choice of solder lugs
or PC terminals. Both insulated and metal bushings can be
specified, as well as .21" inside diameter sleeves for narrow
plug fingers. Maximum contact resistance is .1 ohm. Springs
are made of a special gold-plated copper alloy. Welded cross
bar gold alloy contacts are available on special order.
MECHANICAL
Life: 10,000 insertion/withdrawal cycles, minimum.
Insertion/Withdrawal Forces: Nominal plug retention on
2-conductor jack is .75 pounds with .5 pounds minimum.
Nominal plug retention on 3-conductor jack is 2 pounds with
1.5 pounds minimum. With double tips, the nominal is
1.5 pounds and 1 pound minimum.
Maximum Recommended Mounting Torque: 6" -lb. for
thermoplastic bushing.
Mounting Torque (for Spring Lock PC Terminal):
8" -pound for thermoplastic bushings.
SERIES M-11* HI-D JAX®
Two- and 3-conductor type mate with .25" diameter finger
plugs. Tip and ring springs are gold-plated. Shunts (if used)
have welded crossbar palladium contacts. Ring springs
(where used with shunts) have welded crossbar palladium
contacts. Tip springs (when used) do not have a contact
welded to the spring. Bushing has 3/8-32-NEF-2 thread;
locknut and flat washer for mounting are supplied.
ELECTRICAL
Contact Resistance: .020 ohms maximum (initial),
.050 ohms maximum (after humidity, durability exposure).
Per MIL-STD-202E.
Insulation Resistance: 10,000 MΩ minimum (initial),
1,000 MΩ minimum (after humidity).
SERIES MN-11* HI-D JAX®
Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC.
Contact Rating: 0.25, 48 VDC make and break, 3A carry only.
Same as Series M-11* except threaded bushing is molded
thermoplastic for insulated mounting. Continuous sleeve
contact assures positive sleeve connection without exposed
metal on front of panel.
ENVIRONMENTAL
Thermal Range: -55°C to +85°C (non-operating);
-20°C to +65°C (operating).
SERIES M113 AND M114 HI-D JAX®
Thermal Shock: Per MIL-STD 202, method 107.
Humidity: Per MIL-STD 202, method 106.
Salt Spray: Per MIL-STD 202, method 101.
The versatile 3-conductor M113 and M114 feature springs
which accept a wide variety of 1/4" plug designs. Self-aligning
PC terminals allow for easier insertion into a printed circuit
board. Also feature a metric thread mounting.
SPECIFICATIONS
MATERIALS
Mounting Bushing: Series M11*, MS11* - Nickel-plated
copper alloy. Series MN11*, MNS11* - Molded thermoplastic.
Housing: Molded thermoplastic, UL 94V-0.
Springs: Copper alloy.
Contacts (mil-type): Tip and Ring Springs are gold-plated.
Shuntsprings (where used) are welded crossbar palladium.
Welded crossbar gold alloy contacts are available on
special order.
Contacts (commercial): Tin-plated integral contacts.
Sleeve Terminal: Steel, tin-plated.
Hardware: Supplied with one P10001 copper alloy,
nickel-plated locknut and one S10221 steel,
nickel-plated washer.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
ENCLOSED JACKS 97
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" ENCLOSED TELEPHONE JACKS (CONTINUED)
SERIES MS11* HI-D JAX®
ORDERING INFORMATION
3-conductor with .21" inside diameter sleeve. Mates with plugs
having .206" diameter finger. Protects against accidental
insertion of .25" diameter finger plugs. Gold-plated tip and
ring springs. Welded crossbar palladium contacts on shunt
springs standard. Bushing has 3/8-32-NEF-2 thread; locknut
and flat washer for mounting are supplied.
◊SERIES MNS11* HI-D JAX®
Same as Series MS11* except bushing is molded
thermoplastic.
Order by part number from table.
2-CONDUCTOR
Part
Part
Typical
Sche- Mating
matic** Plug*
Number
Number
Solder Lugs PC Terms
Description
.25" I.D. sleeve,
metal bushing.
–
D,
M111
.25" I.D. sleeve,
–
I
MN111
molded thermoplastic
bushing.
◊TWIN M11* HI-D JAX®
.25" I.D. sleeve,
◊M112A
.
◊M112APC
metal bushing.
Two Series M11* Hi-D Jax strapped on .625" centers. Mates
with Switchcraft® Twin Plugs. 411, 412 and 413. MIL-type
Littel-Plug® phone plugs, 420, 430 and 440 (2-conductor)
and 482 and 483 (3-conductor) are also recommended for
mating with this series.
.25" I.D. sleeve,
◊MN112APC
III
420
MN112A
molded thermoplastic
bushing.
.25" I.D. sleeve,
M113E
–
metal bushing.
.25" I.D. sleeve,
MN113E
–
IX
molded thermoplastic
bushing.
◊ Special Order only; contact Switchcraft.
* Other mating plugs are contained in this plug section.
** See pages 79 and 80.
3-CONDUCTOR
3-CONDUCTOR
Part
Number
Part
Number
Typical
Part
Number
Solder Lugs PC Terms
Part
Number
Typical
Sche- Mating
matic1 Plug2
Sche- Mating
1
Solder MLug1s12PBC TMermLs112B MN112B M113B
Description
.25 inch I.D. sleeve,
.375 inch long
matic
Plug2
Description
MNL113B
MN113B–M112BPC MN112BPC
M112B
⋅ M112BPC .25" inch I.D. sleeve,
metal bushing.
482
metal bushing.
MN113BPC M113PPC1M
ML112B
–
.25" inch I.D. sleeve,
.375 inch long
metal bushing.
M114B
⋅ M114BPC .25 inch I.D. sleeve,
MNL113B MNL112B M114B
metal bushing.
VII
MN112B
⋅ MN112BPC .25 inch I.D. sleeve,
molded thermoplastic
bushing.
482
482
M114
M
B
11
P
4B
C
PC1
M1.1254inBchPI.CD.1sMleeveM, N114B
M
metal bushing,
metric hardware.
MN114BPC
IV
XII
MNL112B
–
.25 inch I.D. sleeve,
.375 inch long
MN114B
⋅ MN114BPC .25 inch I.D. sleeve,
molded thermoplastic
bushing.
480,
484
metal bushing.
M113B
–
.25 inch I.D. sleeve,
metal bushing.
◊ Special order only; contact Switchcraft for price and delivery.
1 See schematics, pages 79 and 80.
2 Number(s) specified are not necessarily the only mating plug(s).
See Plugs Section.
MN113B
MN113BPC .25 inch I.D. sleeve,
molded thermoplastic
bushing.
482
VII
M113BPC1M .25 inch I.D. sleeve,
molded thermoplastic
482
bushing, metric hardware
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
98 HI-D JAX® 2- AND 3-CONDUCTOR
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" ENCLOSED PHONE JACKS (continued)
HI-D® JAX 2- AND 3-CONDUCTOR
TWO CONDUCTOR PART NUMBERS
Solder Lug
Part
Number
Typical
Mating
Plug2
PC Terminals
Part Number
Jack
Schematic1
Description
Open circuit
111
N111
111PC
N111PC
-
I
250
250
250
250
250
250
250
250
250
250
250
Insulated bushing
I
NL111
112A
.375 " long insulated bushing
Single closed circuit
.375" long bushing
I
112APC
◊L112APC
N112APC
-
III
III
III
III
V
L112A
N112A
NL112A
113
Insulated bushing
.375" long insulated bushing
Isolated "make" circuit
Insulated bushing
SERIES 11*
PC TERMINAL VIEW
SERIES N11*
113PC
-
Hi-D Jax® 2- and 3-conductor enclosed phone jacks are ideal
for panel/chassis and PC board mounting. Unitized molded
housing protects springs, provides mechanical and electrical
reliability, minimizes leakage and provides low capacity
between springs. Mounts on .625" minimum centers in rows
or arrays. .25" or .21" inside diameter bushing types, metal or
thermoplastic bushings (for insulated mounting). Insulated
Hi-D Jax® jacks are specifically designed for in-circuit
(insulated) mounting from mounting surface and have fully
protected enclosed internal sleeve feature. Solder lugs or
PC terminals may be selected.
N113
V
◊113D
113E
◊113DPC
113EPC
Transfer circuit (1-C)
Isolated "break" circuit
VI 3
IX
THREE CONDUCTOR PART NUMBERS
112BPC
Double open circuit
.375" long bushing
Insulated bushing
IV
267
267
267
267
S-267
267
-
112B
L112B
N112B
NL112B
-
-
IV
N112BPC
-
IV
.375" long bushing
.210" inside diameter bushing
Single closed circuit
Single closed circuit
.375" long bushing
Insulated bushing
IV
S112BPC
113BPC
113BPC1M
-
IV
113B
-
VII
VII
VII
VII
VII
XXVIII
XII
XII
XII
XII
XII
MOUNTING
267
267
267
267
267
-
L113B
N113B
NL113B
113F
Jacks mount in a single .375" diameter hole on .625"
minimum centers. Series 11*, N11*, NS11* and S11* mount
in panels up to .156" thick. Series L11* and NL11* (long
bushing) mount in panels up to .25" thick. Jacks with PC
terminals mount on PC boards up to .094" thick. Formed
“shoulders” on each terminal provide stable stand-off mount.
Threaded bushing permits mechanical connection to
equipment panel. Mounting hardware is supplied. Also
available is a grounding spur bushing, which allows for
positive grounding of the bushing to the chassis. Contact
factory for details.
N113BPC
-
.375" long bushing
Ring circuit closed
Double closed circuit
Double closed circuit
.375" long bushing
Insulated bushing
113FPC
114BPC
114BPC1M
◊L114BPC
N114BPC
NL114BPC
114B
267
267
267
L114B
N114B
NL114B
.375" long bushing
1 Other circuits available; contact factory. Schematics pages 79 and 80.
2 See Plug Section for other options.
3 Two tip springs.
◊ Special order only. Contact Switchcraft.
SERIES 11* - 2- and 3-conductor types, threaded metal
bushing .276" long. .25" inside diameter bushings.
SERIES L11* - Same as Series 11*, except bushing is
.375" long for mounting in panels up to .25" thick.
SPECIFYING NOTE: Unless otherwise shown in
“Description”, jacks have .276" long threaded bushings
with .25" inside diameter.
SERIES N11* - Same as Series 11*, except bushing is
molded thermoplastic for insulated mounting.
SPECIFICATIONS
SERIES NL11* - Same as Series N11*, except bushing is
.375" long for insulated mounting in panels up to .25" thick.
MATERIAL
Mounting Bushing: Series 11*, L11*, S11* -
Nickel-plated copper alloy.
Series N11*, NL11*, NS11* - Molded thermoplastic
over nickel-plated copper alloy sleeve.
SERIES S11* - Same as Series 11*, except bushing has
.21" inside diameter. Smaller diameter protects against
accidental insertion of plugs with .25" diameter fingers.
◊SERIES NS11* - (SPECIAL ORDER ONLY) - Same as
Series N11*, except bushing is .21" inside diameter.
113BPC1M AND 114BPC1M - Versatile, 3-conductor
113BPC1M and 114BPC1M feature springs which accept
a wide variety of 1/4" plug designs. Self-aligning PC terminals
allow for easier insertion into a printed circuit board. Also
feature a metric thread mounting.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
HI-D JAX® 2- AND 3-CONDUCTOR 99
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" ENCLOSED PHONE JACKS (continued)
HI-D JAX® 2- AND 3-CONDUCTOR
M Series
Hi-D Jax® with Insulated Bushing
Recommended
PCBoard Layout
Hi-D Jax® with PC Terminals
Standard (Solder lugs)
.375 (long bushing only)
[9.53]
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
100 HI-D JAX® 2- AND 3-CONDUCTOR
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
SPRING LOCK PC TERMINALS FOR HI-D JAX®
HI-D JAX® SHOWING SPRING
LOCK PC TERMINALS
Hi-D Jax® enclosed 1/4" phone jacks offer spring lock PC
terminals which close during insertion into PC board. Upon
completed insertion, the terminals reopen to securely hold the
jack to the PC board during soldering. Solder “fills” the terminals
which provides an additional security from loosening.
The spring lock terminal is available on all Hi-D Jax® which
currently offer PC terminals.
NOTE: Tip and ground terminals can be specified with spring
lock terminals (also ring terminal on 3-conductor jacks).
MOUNTING
Jacks mount in a single .375" diameter hole on .625" minimum
centers. Series 11*, N11* and S11* mount in panels up to
.156 " thick. Series NL11* (long bushing) mount in panels up to
.250 " thick. Jacks with PC terminals mount on PC boards up to
.094 " thick. Spring lock PC terminals hold jack securely to PC
board. Threaded bushing permits mechanical connection to
equipment panel. Mounting hardware is supplied. See
“RECOMMENDED PC BOARD LAYOUT” for further details.
CLOSE-UP VIEW OF
SPRING LOCK TERMINALS
SERIES 11* - 2- and 3-conductor types, threaded metal
bushing .276" long. .250 inch inside diameter bushings.
SERIES N11* - Same as Series 11* except bushing is
molded thermoplastic for insulated mounting.
SERIES NL-11* - Same as Series N11* except bushing is .375"
long for insulated mounting in panels up to .250" thick.
SERIES S11* - Same as Series 11* except bushing has .210"
inside diameter Smaller diameter protects against accidental
insertion of plugs with .250" diameter fingers.
SPECIFICATIONS
MATERIAL
Mounting Bushing: Series 11*, S11*: Nickel-plated copper
alloy. Series N11*, NL11*: Molded thermoplastic over plated
copper alloy sleeve.
PARTIAL VIEW SHOWING SPRING LOCK TERMINALS
Tip, ring and sleeve terminals are spring lock type.
ORDERING INFORMATION
TWO CONDUCTOR PART NUMBERS
Typical
Jack
Schematic
Mating
Part Number
Description
Plug1
◊
◊
◊
◊
◊
◊
111PCS
Open circuit
I
250
250
250
250
250
250
N111PCS
112APCS
N112APCS
113PCS
Insulated bushing
Single closed circuit
Insulated bushing
Isolated “make” circuit
Isolated “break” circuit
I
III
III
V
IX
113EPCS
THREE CONDUCTOR PART NUMBERS
◊
◊
◊
◊
◊
◊
◊
◊
◊
112BPCS
Double open circuit
Insulated bushing
.210" I.D. bushing
Single closed circuit
Insulated bushing
Ring closed circuit
Double closed circuit
Insulated bushing
.375" long bushing
IV
IV
267
267
S267
267
267
267
267
267
267
N112BPCS
S112BPCS
113BPCS
IV
VII
N113BPCS
113FPCS
VII
RECOMMENDED PC BOARD LAYOUT SPRING LOCK
TERMINALS (COMPONENT SIDE)
XXVIII
XII
114BPCS
NOTES:
1. SERIES 110PC––ALL HOLES TO CLEAR .078" X .016" TERMINAL.
2. SERIES 110PCS––TIP, RING & SLEEVE HOLES TO BE .055" DIA. RING SHUNT &
TIP SHUNT HOLES TO CLEAR .078" X .016" TERMINAL.
N114BPCS
NL114BPCS
XII
XII
1 See Jack Section for other mating plugs.
◊ Special order only. Contact Switchcraft.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
RIGHT-ANGLE PHONE JACKS 101
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" RIGHT-ANGLE PHONE JACKS
SERIES SN37, SN49 AND SN70
SN49B12B with cover Number P2994
SN49A12B
SN37A14B with cover Number P2993
SN49C12B
SN70B12A
SN70C14B
These low-profile phone jacks have “snap-in” PC mounting,
right-angle plug insertion and available with 2- and 3-conductor
circuits and plastic or metal bushings. Ideal for telecommunications,
data processing and other high quality audio connecting
applications.
SERIES SN37A - Right-angle PC mount phone jack with molded
plastic housing. Only .375" high, this jack features a plain
(non-threaded) bushing and accepts commercial standard phone
plugs with .25" diameter finger.
Insertion Force: 8 pounds maximum.
Withdrawal Force: 1.5 pounds minimum.
Life: 10,000 cycles minimum.
ELECTRICAL
Insulation Resistance: 2 x 106 MΩ at 500 V DC per
MIL-STD-202, method 302 (initial).
Dielectric Withstanding Voltage: 500 V AC.
ENVIRONMENTAL
Thermal Range: -55°C (-67°F) to +85°C (+185°F) Non
Jack circuit selection:
2-conductor • Single open circuit • Shunted tip
3-conductor • Double open circuit • Shunted tip and ring
operating. -20°C to + 65°C Operating.
Thermal Shock: Per MIL-STD-202d, method 107.
Humidity: Per MIL-STD-202, method 106, less steps 7A and 7B.
Salt Spray: Per MIL-STD-202, method 101.
Jack housing snaps into PC boards (.062" thick) and features
molded tension fingers to provide stable mount. Location pin
polarizes mounting for correct insertion every time. Clearance
between housing facilitates board cleaning without disturbing
internal springs. SN37 without tension fingers available on
special order.
MATERIAL
Housing and Cover: Black thermoplastic, UL 94V-O.
Contact Springs: Copper alloy with tin-plated terminals.
Hardware: Nickel-plated copper alloy.
Metal Bushing: Nickel-plated copper alloy.
Molded housing protects internal parts and allows high density
packaging. Supplied with “Snap-On” cover.
ORDERING
1. Order jacks from tables on page 103.
2. For all special order items, contact Switchcraft.
SERIES SN49A - Similar to Series SN37A, except .492" high and
insulated/plain (non-threaded) bushing. “Snap-On” cover available
on special order only.
SERIES SN49B - Similar to Series SN37A, except .492" high and
insulated threaded bushing. Washer and hex nut for bushing
mount supplied. “Snap-On” cover available on special order only.
SERIES SN49C - Similar to Series SN37A, except .492" high and
threaded metal bushing. Washer and hex nut for bushing mount
supplied. “Snap-On” cover available on special order only.
SERIES SN70B - This series features threaded/insulated
bushing and .708" in height. Circuit selection and housing features
are same as Series SN49B. “Snap-On” cover not available.
SERIES SN70C - Same as Series SN70B, except bushing is
threaded metal type.
SPECIFICATIONS
MECHANICAL
Shock: Per MIL-STD-202, method 213.
Vibration: Per MIL-STD-202, method 201.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
102 RIGHT-ANGLE PHONE JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" RIGHT-ANGLE PHONE JACKS (continued)
SERIES - RA and RN
Series RN110
Series RA
SERIES RA - 2- and 3-conductor RA Jax® are designed with
split terminals which provide two distinct advantages over
contemporary jacks:
SPECIFICATIONS
Housing: Thermoplastic.
Bushing: Integral with housing.
1. Positive retention of jack in PC board during wave soldering.
2. Split terminal permits additional solder flow paths up the
terminal for better mechanical/electrical connection
Tip spring design facilitates positive retention of differing mating
plug tip shapes (industry standard and others).
Springs: Copper alloy, silver-plated (also available with selectively
gold-plated contact points and selectively tin-plated terminals).
Contacts: Integral, part of shunt springs.
NOTE: Specifications for Mechanical, Electrical and Environmental
are the same for Hi-D® Jax. (page 98)
SERIES RN - Right-angle Hi-D Jax® permits space-saving
mounting on PC boards. Available in 2- and 3-conductor
types with or without shunt circuits, which can mate with .25"
diameter COMMERCIAL or TELEPHONE/MIL plug fingers.
Right-angle jack permits tip of mating plug to be inserted
parallel with PC board. Can be mounted on PC boards or
combined PC board and panel/chassis.
Mounted through .375" diameter holes (locknut and washer
supplied) in panels and chassis up to .141" thick. Minimum
mounting centers are .625". If insulated mount is desired,
mounting with flat, non-conductive washer (not supplied) is
recommended.
PC terminals mount on boards up to .125" thick, and hand dip
or wave soldering, is recommended. Three separate standoffs
fit through board to provide stable mounting.Threaded bushing
permits optional fastening to panel or chassis.
SERIES RN110 - 2- and 3-conductor right-angle types mount
in PC boards or panel/chassis. Bushing is .278" long.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
RIGHT-ANGLE PHONE JACKS – SERIES RA, RN AND SN 103
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" RIGHT-ANGLE PHONE JACKS (continued)
ORDERING INFORMATION
ORDERING INFORMATION
Typical
Mating
Plug3
Typical
Mating
Plug3
SERIES SN
Jack2
SERIES RA
Jack2
Part Numbers
SN37A111
Description
Schematic
Part Numbers
Description
Schematic
2-cond., open circuit
I
RA49B11
2-cond., open circuit
I
250
267
250
267
SN37A12A1 2-cond., single closed circuit
SN37A12B1 3-cond., double open circuit
SN37A14B1 3-cond., double closed circuit
III
IV
XII
I
RA49B12A
RA49B12B
RA49B14B
RA49C11
2-cond., single closed circuit
3-cond., double open circuit
3-cond., double closed circuit
2-cond., open circuit
III
IV
XII
I
SN49A111
2-cond., open circuit
250
267
250
267
250
267
250
267
250
267
250
267
250
267
250
267
SN49A12A1 2-cond., single closed circuit
SN49A12B1 3-cond., double open circuit
SN49A14B1 3-cond., double closed circuit
III
IV
XII
I
RA49C12A
RA49C12B
RA49C14B
RA70B11
2-cond., single closed circuit
3-cond., double open circuit
3-cond., double closed circuit
2-cond., open circuit
III
IV
XII
I
SN49B111
SN49B12A1 2-cond., single closed circuit
SN49B12B1
3-cond., double open circuit
SN49B14B1 3-cond., double closed circuit
2-cond., open circuit
III
IV
XII
I
RA70B12A
RA70B12B
RA70B14B
RA70C11
2-cond., single closed circuit
3-cond., double open circuit
3-cond., double closed circuit
2-cond., open circuit
III
IV
XII
I
SN49C11
2-cond., open circuit
SN49C12A
SN49C12B
SN49C14B
SN70B11
2-cond., single closed circuit
3-cond., double open circuit
3-cond., double closed circuit
2-cond., open circuit
III
IV
XII
I
RA70C12A
RA70C12B
RA70C14B
2-cond., single closed circuit
3-cond., double open circuit
3-cond., double closed circuit
III
IV
XII
SERIES RN
Part Numbers
SN70B12A
SN70B12B
SN70B14B
SN70C11
2-cond., single closed circuit
3-cond., double open circuit
3-cond., double closed circuit
2-cond., open circuit
III
IV
XII
I
250
250
267
267
267
267
RN111PC
RN112APC
RN112BPC
RN113BPC
◊RN113FPC
2-cond., single open circuit
2-cond., single closed circuit
3-cond., double open circuit
3-cond., tip closed, ring open
3-cond., tip open, ring closed
3-cond., double closed circuit
I
III
IV
VII
SN70C12A
SN70C12B
SN70C14B
2-cond., single closed circuit
3-cond., double open circuit
3-cond., double closed circuit
III
IV
XII
XXVIII
XII
RN114BPC
1 Series SN37A supplied with Part Number P2993 cover. Series SN49A and SN49B can
be supplied with Part Number P2994 cover on special order. Contact Switchcraft.
2 See pages 79 and 80.
3 Other mating plugs are available.
◊ Special order only. Contact Switchcraft.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
104
RIGHT-ANGLE PHONE JACKS – SERIES SN
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" RIGHT-ANGLE PHONE JACKS (continued)
JACK SCHEMATICS
SERIES SN
SERIES
SN37A
SERIES
SN49A
SERIES
SN49B
SERIES
SN49C
SERIES
SN70B
SERIES
SN70C
RECOMMENDED PC
BOARD LAYOUT
SERIES SN37A, SN49A & SN49B
(Component Side)
RECOMMENDED PC
BOARD LAYOUT
SERIES SN49C
COVERS, PART NO. P-293 & P-2994
(No. P-2994, special order only)
(Component Side)
RECOMMENDED PC
RECOMMENDED PC
BOARD LAYOUT
SERIES SN70B
BOARD LAYOUT
SERIES SN70C
(Component Side)
(Component Side)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
"
1/4 RIGHT-ANGLE PHONE JACKS – SERIES RA AND RN 105
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" RIGHT-ANGLE PHONE JACKS (continued)
SERIES RA and RN
SERIES RA49B
SERIES RA49C
SERIES RA70B
SERIES RA70C
RN SERIES
DIMENSIONS
RECOMMENDED PC
BOARD LAYOUT
(Component Side)
RECOMMENDED PC
BOARD LAYOUT
(Component Side)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
106 JACK COVERS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
JACK COVERS
Reliable, spring-loaded covers effectively seal front panel
bushing openings from dust and dirt when mating plugs are
not connected to jack. Series 500 is mounted with conventional
threaded bushing jacks. Special locknut (comes with Series
500 jack covers) seals tightly against rubber washer when
cover is closed. Series 600 is used with certain type tip jacks.
Due to variable jack dimensions, two .031" washers are supplied.
515
SPECIFICATIONS
MATERIAL
Base and Cover: Steel per QQ-S-698; finish per
MIL-F-14072 (Sig. C), enamel, semi-gloss.
Axle: Copper alloy per QQ-W-321, Type 321,
composition B. Plated per QQ-P-416, Type II, Class 3.
Spring: Stainless steel per QQ-W-432, Type 302.
Hex Nut: Copper alloy per QQ-B-626, composition 22.
Same plating as axle.
520
Gasket: Synthetic rubber per MIL-R-6855, Type II,
35-40 Durometer.
Washer (600 only): Steel per QQ-S-698; plated per
QQ-P-416, Type II, Class 3.
Additional Specifications for Numbers 512 and 612:
Same as above, except rivet, base, cover and hex nut
and washer (Number 612 only) are nickel-plated
per QG-N-290.
Part
No.
Part
No.
Part
No.
Part
No.
Color
Color
Black
Olive Drab
Bright Nickel
510
512
◊610
515
520
615
612
Navy Gray
◊620
◊ Special order only. Contact Switchcraft.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
"
(
)
1/4 PHONE JACKS – SERIES E LOCKING AND THICK PANEL PHONE JACKS 107
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" PHONE JACKS (continued)
LOCKING
THICK PANEL PHONE JACKS
PHONE JACKS
151
SERIES E
Jacks are standard 2- and 3-conductor phone jacks with extra long
threaded bushing for mounting in panels/chassis up to 1.25" thick.
Metal bushing virtually eliminates hum pick-up, and is ideal for electric
guitar and speaker connections. Jacks mate with standard
commercial phone plugs. See plug section for mating plugs. Jacks
mount in a single .469" diameter hole. Rugged cable clamp protects
connections from twisting and pulling stresses.
Series E jacks provide stable, secure connections in panels where
shock/vibration or accidental disconnect may occur. Plug locks-in
automatically upon insertion; press “PUSH” tab to unlock and
remove plug. Series E jacks have the same front panel
appearance as Series E Q-G® audio connectors.
SPECIFICATIONS
MECHANICAL
Life: 10,000 cycles minimum.
SPECIFICATIONS
MATERIAL
ELECTRICAL
Insulation Resistance: 2 x 106 MΩ at 500 V DC per
MIL-STD-202, method 302 (initial).
Dielectric Withstanding Voltage: 1,000 V AC (rms).
Mounting Bushing: Nickel-plated copper alloy with knurled flange.
Insulating Spacer: Rigid plastic.
Insulator/Spring Mount: Thermoplastic.
Springs: Copper alloy.
Terminals: Tip: Copper alloy. Ring: (Number 152B only) copper alloy.
Sleeve: Steel, tin-plated.
Hardware: Supplied with one, Number P10531 nickel-plated copper alloy
hex nut, and one, Number P14761 nickel-plated copper alloy flat washer.
ENVIRONMENTAL
Thermal Range: -55°C to +85°C (non-operating);
-20°C to +65°C (operating).
Thermal Shock: Per MIL-STD-202, method 107.
Humidity: Per MIL-STD-202, method 106.
Salt Spray: Per MIL-STD-202, method 101.
Part
Number
Jack
Typical
Description
Schematic Mating Plug
151
152
152B
153
2-conductor, open circuit, nickel finish
2-conductor, open circuit, brass finish
3-conductor, double open circuit, nickel finish
2-conductor, open circuit, gold-plated springs,
electro-polish brass finish, 9/16-12 UNC wood threads
3-conductor, double open circuit, gold finish,
no cable clamp
I
I
IV
I
280
280
297
280
MATERIAL
Shell: Die-cast zinc, with satin nickel-plating. Black chrome over
nickel-plating on special order.
Insert and Latch: Thermoplastic, UL 94V-O.
Latch Release: Nickel-plated die-cast zinc.
Contact Springs: Tin-plated copper alloy.
154
155
IV
IV
297
3-conductor, double open circuit, black satin finish,
no cable clamp
Typical
Part
Number
Jack
Schematic
Mating
1
2
Description
Plug
I
E111L
2-cond., open circuit
250
267
IV
3-cond., double open circuit
E112BL
1. See Jack Schematics, pages 79 and 80
2. See Plugs Section
THICK PANEL PHONE JACKS
RECOMMENDED
PANEL CUTOUT
LOCKING PHONE JACKS, SERIES E
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
"
108
EXTENSION JACKS AND 1/4 SPEAKER JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" EXTENSION JACKS (IN-LINE)
TWO-CONDUCTOR PART NUMBERS
Part
Mating
Plug1
Number
Description
80
Black handle; screw terminals
Black handle; solder lugs
250
250
250
250
250
80
120
121, 131
88
120
121
128
Shielded handle; screw terminals
Shielded handle; solder lugs; cable clamp
Shielded handle; solder lugs
Extension Jax® jacks are connected to the end of a cable.
2- and 3-conductor jacks mate with standard commercial
phone plugs, and have a sturdy cable clamp strain relief,
knurled shielded or molded black plastic handles, and a
screw type solder terminal. All internal parts are interlocked.
Note: See locking phone plugs section.
THREE-CONDUCTOR PART NUMBERS
Part
Mating
Plug1
Number
Description
SPECIFICATIONS
MATERIAL
Body, Sleeve and Shielded Handle: Nickel-plated
copper alloy.
Plastic Handles: Molded black thermoplastic.
Springs: Special copper alloy.
Bushing and Flange: Plated copper alloy.
Insulation: Thermoplastic.
131
Shielded handle; solder lugs
Black handle; screw terminals
Similar to No. 830 except, .21" I.D. sleeve
Black handle; solder lugs
267
267
480
267
267
267
830
S830
838
1230
1238
Shielded handle; screw terminals
Shielded handle; solder lugs
1. Other mating plugs are available.
Clamp Terminals: Tin-plated copper alloy.
121, 131
Z15J
1/4" SPEAKER JACKS
High power 2-conductor speaker jack carries 15A (continuous)
audio speaker current levels. Jack Number Z15J has positive
detent for plug retention. Terminations are solder lug; wires
accepted are up to 10 AWG. Red housing indicates high current
rating. Recommended mating plugs: 70, 184, 187 series.
Z15J
SPECIFICATIONS
Housing: Glass reinforced thermoplastic, UL 94V-O.
Tip Spring and Ground Terminals: Copper alloy.
Bushing and Hardware: Nickel-plated copper alloy
(hardware supplied).
Heat Rise: 30°C with 15 A continuous carry.
Life: 10,000 (minimum) with proper plug.
Part Number
Z15J
Description
High power speaker jack
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
SHIELDED PHONE JACKS, SF-JACKS® SHORT FRAME JACKS, MINI PHONE JACKS 109
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" SHIELDED PHONE JACKS
CN12A
Shield is assembled as part of the jack; cover “snaps” into
place. Shield is designed for Hi Z circuits. Mounting is
through a 3/8" diameter hole in chassis/panel up to
.156" thick with hex nut and flat washer (supplied).
On special order, jacks with .21 inch inside diameter
bushing are available.
TWO CONDUCTOR PART NUMBERS
Part
Number
Jack
1
Description
Schematic
Uses Number 11 Littel-Jax® jacks
Uses Number 12A Littel-Jax® jacks
I
◊
CN11
◊
CN12A
III
◊ Special order only. Contact Switchcraft.
SPECIFICATIONS
THREE CONDUCTOR PART NUMBERS
MATERIAL
◊
CN12B
CN13B
Uses Number 12B Littel-Jax® jacks
Uses Number 13B Littel-Jax® jacks
IV
Cover and Shield: Copper alloy, nickel-plated.
Cable Entry Insulation: Thermoplastic.
VII
◊
1 See jack schematics on pages 79 and 80.
2 See Plug Section for mating information.
◊ Special order only. Contact Switchcraft.
SF-JAX® SHORT FRAME JACKS
.141" MINIATURE
PHONE JACKS
Typical
Schematic Mating
Part
No. Cond. Number
Mounting
Plug MIL Type Contacts Rating In. (mm)
125
24B
25
3
2
3
2
3
2
3
XII
XIII
VII
XI
267
250
267
250
267
250
482
-----
-----
MINIATURE EXTENSION JACK,
PHONE JACK NUMBER 125 (EIA STANDARD)
.375 (9.52)
hole,
mounts in
panels up
to .156
◊53B
◊54A
◊54B
◊55
-----
Cable-mounted Tini-Extension Jax® 2-conductor single open
circuit jack has built in cable clamp/sleeve terminal. Mates with
Tini-Plug® phone plugs and other plugs with .141" diameter
fingers and compatible tip shape. Shielded housing/handle is
knurled for positive fingertip grip; solder lug terminals.
Body and handle: Nickel-plated copper alloy.
Insulation: Rigid plastic.
3A
125V
AC
-----
Fine
XII
XIII
XV
-----
Silver
-----
(3.96) thick
◊C-55B
JJ-095,
M641/14-1
Long spring design reliability with minimum behind-panel
depth. Series 50 same as Series 20, except solder lug
location requires more depth, but less panel space.
Number C55B has MIL type insulation and finish.
Springs: Plated copper alloy.
TINI-EXTENSION JAX JACK
Typical
SERIES 20
SERIES 50
24B
25
Part
Number
Jack
Schematic
Mating
Plug
53B
54A
54B
55
Description
C55B
125
Extension Jack
I
750
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
110 MINIATURE PHONE JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
.141" MINIATURE PHONE JACKS
PC142A
41
42A
142A
TINI-JAX® MINIATURE PHONE JACKS,
TINI-D-JAX® MINIATURE ENCLOSED
NUMBERS 41, 42A, 43A
PHONE JACKS, NUMBERS 142A, PC142A
Tini-D Jax uses Hi-D Jax® construction and mounts on .375"
centers. Weight: 3.6 grams. Number 142A mounts through .25"
diameter hole in chassis/panel up to .125" thick. Four standoff
dimples can be molded into housing to reduce
effective length of bushing to .187" (special order).
Number PC142A has special spring terminals for “snap-in”
mounting to PC boards up to .125" thick - ready for hand,
wave or dip-soldering.
Tini-Jax 2-conductor phone jacks, (for limited space
connecting, mate with miniature phone plugs having .141 "
diameter fingers and compatible tip shape) are 1/3 the size of
Littel-Jax® and weigh less than 1/8 ounce. Notched insulators
interlock internal parts. Unique tip spring shape mates with
Switchcraft Tini-Plug® phone plugs. Mounting hole: .250"
diameter in panels up to .125" thick (mounting hardware
supplied). For insulated mount, order two washers separately,
Number S1564 (swedged fiber washer .312" diameter
mounting hole) and number S2207 (flat phenolic washer).
SPECIFICATIONS
MECHANICAL
Life: 5,000 insertion/withdrawal cycles, minimum.
Insertion/Withdrawal: 15 ounce minimum,
40 ounce maximum, insertion. 12 ounce minimum,
25 ounce maximum, withdrawal.
SPECIFICATIONS
MECHANICAL
Life: 5,000 insertion/withdrawal cycles, minimum.
ELECTRICAL
ELECTRICAL
Contact Resistance: .075 ohms maximum.
Insulation Resistance: 5,000 MΩ minimum.
Dielectric Withstanding Voltage: 250 V AC maximum.
Contact Rating: .25A, 48 V DC.
Contact Resistance: .10 ohms maximum.
Dielectric Withstanding Voltage: 250 V AC maximum.
Shunt Tension: 100 grams minimum.
MATERIAL
Housing: Molded plastic.
MATERIAL
Mounting Bushing: Nickel-plated copper alloy.
Mounting Bushing: Plated copper alloy.
Tip Spring: Plated copper alloy, bifurcated.
Shunt Springs: Plated copper alloy.
Sleeve Bracket: Plated steel.
Insulating Spacers: Rigid plastic.
Springs: Special copper alloy.
Sleeve Terminal: Tin-plated copper alloy.
Hardware: Supplied with one, Number P11501
nickel-plated copper alloy locknut, and one,
Number S17901 nickel-plated steel flat washer.
Insulator: Rigid plastic.
Hardware: Number 142A supplied with one, Number P1975
nickel-plated copper alloy locknut, and one, Number S3997
nickel-plated steel flat washer.
Typical
Part
Number
Jack
Schematic
Mating
1
2
Description
Open circuit
Plug
41
42A
I
III
750
750
750
750
750
Shunted (closed circuit)
Special transfer circuit
Shunted (closed circuit)
Shunted (closed circuit)
43A
Note 3
III
142A
PC142A
III
1. See jack schematics, pages 79 and 80.
2. See Plugs Section for mating information.
3. When inserted, plug tip contacts “make” tip spring. Further insertion allows
tip to short “make” tip spring and tip spring together. Full insertion opens
tip shunt circuit.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
MINIATURE PHONE JACKS 111
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
.141" MINIATURE PHONE JACKS (continued)
“TINI-JAX” JACKS
142A
“TINI-D” JACKS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
112 3.5MM DUAL STEREO JACK
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
3.5MM DUAL STEREO JACK
UNSHIELDED - 35RAPC7J
SHIELDED - 35RAPC7JS
FEATURES
MATERIALS
• 3-conductor, miniature phone jack mates with 3.5 mm
Housing: Thermoplastic.
finger plugs.
Tip and Ring Springs: Silver-plated copper alloy.
Shunt Terminals: Silver-plated copper alloy.
Sleeve Terminals: Silver-plated copper alloy.
Shield: Pre-tinned copper alloy.
• Saves board space...two jacks in a single vertical
mount footprint.
• Ideally suited for infra-red and convection oven
soldering 235°C (455°F).
PERFORMANCE SPECIFICATIONS
Insertion/Extraction Forces, initial: 0.8 to 6 pounds.
Dielectric Withstanding Voltage: 500 VAC.
Insulation Resistance, initial: 100 Megaohms, min.
Contact Resistance: Between plug and jack:
50 milliohms, maximum Between springs and shunts:
30 milliohms, maximum.
• Board retention pins accommodate PC board thickness
range of .050" to .080".
• Single-screw panel mounting hole is standard.
• EMI-RFI shield, optional.
• Housing UL 94V-0 rated against flammability.
APPLICATIONS
• Multi-media workstations
• Headphones/microphone sets
• Interactive TV
• Audio
• Telecommunications
• Medical
Life: 5000 cycles, minimum.
ORDERING INFORMATION
Part Number:
Shielded - 35RAPC7JS
Unshielded - 35RAPC7J
1. Order by part number.
• Computer
• Instrumentation
2. Contact Switchcraft for special order information.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
3.5MM DUAL STEREO JACK 113
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
3.5MM DUAL STEREO JACK (continued)
NOTES:
1. Shield isolated from terminals 1 and 6.
2. Width of all terminals = 0.032" (0.814 mm).
3. Use Camcar Textron S25 T8 TORX pan head “Duro-PT”
thread cutting fastener of appropriate length or equivalent.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
114 3.5MM SINGLE MONO AND STEREO JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
3.5MM SINGLE MONO AND STEREO JACKS
35RAPC2BHN2
35RAPC4BV4
35RAPC2AV
35RAPC4BH3
35RAPC2BV4
35RAPC2BH3
Insulating Washers: Rigid Plastic
Springs: Copper alloy
FEATURES
MATERIALS
• 2 and 3 conductor 3.5mm phone jacks
• Right angle PC mount, true SMT
versions, and open frame panel mounts
• Wide variety of circuits available
• Mates with all 3.5mm plugs Right angle
PC mount available in low profile,
horizontal styles
Housing: Thermoplastic, UL94V-1
Terminals: Silver-plated, copper alloy
Bushing: Nickel-plated, copper alloy
Performance Specifications:
Contact Resistance: < 50 milliohms
Insulation Resistance: 100 milliohms min.
Dielectric Withstanding Voltage: 250
VAC (35RAPC2BHN2- 500 VAC)
Open Frame Versions Materials:
Housing (35PM2BV2):
Sleeve Terminal: Tin-plated, copper alloy
Hardware: Supplied with one, P11501
nickel-plated brass locknut, and one,
S17901 nickel-plated steel flat washer
Performance Specifications:
Contact Resistance: .075 ohms max.
Insulation Resistance: 5,000 Mohms
min
Dielectric Withstanding Voltage:
250 VAC Life: 5000 cycles, min
Thermoplastic, 94V-1
Life: 5000 cycles, min.
Bushing: Nickel-plated, copper alloy
ORDERING INFORMATION
Part numbers which include the letter “N” designate non-threaded bushings.
Part numbers without the letter “N” designate threaded bushing.
Height vs.
Height vs.
Width
Part Number Description
Width
horizontal
vertical
vertical
vertical
vertical
vertical
vertical
vertical
vertical
Bushing
threaded3
threaded3
threaded3
threaded3
Part Number Description
Bushing
threaded3
35RAPC4BH3
35RAPC2AV4
35RAPC2BV4
35RAPC3BV4
35RAPC4BV4
35RAPC2AVN4
35RAPC2BVN4
35RAPC3BVN4
35RAPC4BVN4
stereo
mono
stereo
stereo
stereo
mono
stereo
stereo
stereo
35RAPC2AV
35RAPC2AHN2
35RAPC2AHN3
35RAPC2BHN2
35RAPC2BHN3
35RAPC3BHN2
35RAPC3BHN3
35RAPC4BHN2
35RAPC4BHN3
35RAPC2AH3
mono
mono
mono
stereo
stereo
stereo
stereo
stereo
stereo
mono
stereo
stereo
vertical
horizontal
horizontal
horizontal
horizontal
horizontal
horizontal
horizontal
horizontal
horizontal
horizontal
horizontal
non-threaded
non-threaded
non-threaded
non-threaded
non-threaded
non-threaded
non-threaded
non-threaded
threaded3
threaded3
non-threaded
non-threaded
non-threaded
non-threaded
Replacement Knurl Nut P3345
35RAPC2BH3
threaded3
threaded3
35RAPC3BH3
1. Order by part number
2. Contact Switchcraft for special ordering information
3. Mounting hardware included.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
3.5MM SINGLE MONO AND STEREO JACKS
115
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
3.5MM SINGLE, MONO AND STEREO JACKS (continued)
35RAPC2AV – MONO, VERTICAL, THREADED
MATERIALS
PERFORMANCE SPECIFICATIONS
Contact Resistance: 20 milliohms maximum.
Insulation Resistance:
100 milliohms minimum at 250V DC.
Dielectric Withstanding Voltage: 250V AC.
Life: 5000 cycles, minimum.
Coil Spring: Steel wire.
Bushing: Nickel-plated copper alloy.
Terminal: Silver-plated copper alloy.
Tip Spring: Silver-plated copper alloy.
Shunt Terminal: Plated copper alloy.
Cover: Thermoplastic, transparent UL 94V-2.
Body: Thermoplastic, UL 94V-1 black color.
Insertion Force: 0.88 pounds - 3.5 pounds.
Withdrawal Force: 0.88 pounds - 2.64 pounds.
35RAPC2AV4, 35RAPC2BV4, 35RAPC3BV4, 35RAPC4BV4 - STEREO, VERTICAL, THREADED
MATERIALS
PERFORMANCE SPECIFICATIONS
Contact Resistance: 20 milliohms maximum,
initial 50 milliohms maximum, after life.
Insulation Resistance: 50 megohms minimum at 500V DC.
Dielectric Withstanding Voltage: 250V AC.
Life: 5,000 cycles, minimum.
Coil Springs: Steel Wire.
Ring Spring: Copper alloy strip, tin alloy plating.
Ground Terminal: Copper alloy strip, tin alloy plating.
Bushing: Nickel-plated copper alloy.
Cover: Thermoplastic, UL 94V-0 black color.
Body: Thermoplastic, UL 94V-0 black color.
Insertion Force: 0.88 lbs. to 3.50 lbs.
Withdrawal Force: 0.88 lbs. to 3.10 lbs.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
116 3.5MM SINGLE MONO AND STEREO JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
3.5MM SINGLE, MONO AND STEREO JACKS (continued)
35RAPC2AHN2, 35RAPC2BHN2, 35RAPC3BHN2, 35RAPC4BHN2 - STEREO, HORIZONTAL, NON-THREADED
MATERIALS
PERFORMANCE SPECIFICATIONS
Cover: Thermoplastic, UL 94V-1 black color.
Ring Spring: Copper alloy.
Tip Spring: Silver-plated copper alloy.
Ground Terminal: Silver-plated copper alloy.
Metal: Copper alloy, nickel plating.
Body: Thermoplastic, UL 94V-0 black color.
Contact Resistance: 30 milliohms maximum, initial
100 milliohms maximum, after life.
Insulation Resistance: 100 megohms minimum
at 500V DC.
Dielectric Withstanding Voltage: 500V AC.
Life: 5000 cycles, minimum.
Insertion Force: 0.88 pounds - 6.6 pounds.
Withdrawal Force: 0.88 pounds - 6.6 pounds.
**Same drawing for jack with non-threaded bushing.
, 35RAPC2BH3, 35RAPC3BH3, 35RAPC4BH3
35RAPC2AH3
- STEREO, HORIZONTAL, THREADED
MATERIALS
PERFORMANCE SPECIFICATIONS
Contact Resistance: 20 milliohms maximum, initial
100 milliohms maximum, after life.
Insulation Resistance: 100 megohms minimum.
Dielectric Withstanding Voltage: 250V AC.
Life: 5000 cycles, minimum.
Coil Springs: Steel wire.
Tip Spring: Silver-plated copper alloy.
Ring Spring: Silver-plated copper alloy.
Ground Terminal: Silver-plated copper alloy.
Bushing: Nickel-plated copper alloy.
Cover: Thermoplastic, transparent UL 94V-2.
Body: Thermoplastic, UL 94V-1 black color.
Insertion Force: 0.88 lbs. - 3.50 lbs.
Withdrawal Force: 0.88 lbs. - 3.10 lbs.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
3.5MM SINGLE MONO AND STEREO JACKS
117
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
3.5MM SINGLE MONO AND STEREO JACKS
Switchcraft introduces a new series of 3.5mm jacks. These
low profile jacks come in a wide variety of circuits, both
2 and 3 conductor versions. Circuits include mono closed,
stereo open, stereo tip closed and ring open, and stereo
closed. The 35RASMT Series is available on tape and reel
only. Contact Switchcraft for exact dimensions of the reels.
They’re designed for use in today’s electronic equipment
that features remote speakers, headsets, and headphones.
While they are more compact than commonly used PC
35RASMT
mount phone jacks, they are still extremely durable. Jacks
come on tape and reel, 1K per reel.
FEATURES AND BENEFITS
3.5MM SINGLE MONO
• SMT mounting
• Tape and reel packaging
AND STEREO JACKS
Part Number/Description
• Wide variety of circuits
35RASMT2AHNTR
Mono, closed circuit, on tape and reel
APPLICATIONS
• Computer
• Video Cameras
• Personal/Portable Audio Devices
• Multimedia
35RASMT2BHNTR
Stereo, dual open circuit,
on tape and reel
SPECIFICATIONS
Electrical Current Rating: 3A
Contact Resistance: <50 mohms
Insulation Resistance: 100 mohms (min.)
Dielectric Withstanding Voltage: 250VAC @ 1 minute
35RASMT3BHNTR
Stereo, tip closed and ring open
circuit, on tape and reel
35RASMT4BHNTR
Stereo, dual closed circuit,
on tape and reel
MECHANICAL
Lifecycles: 5,000
Operating Temperature: -25°C to +85°C
MATERIAL
Housing: Black thermoplastic
Sleeve, Ring and Tip Terminals:
Copper Alloy, silver-plated
(See next page for drawings.)
Shunt Terminal: Copper Alloy, Silver-plated
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
118 3.5MM SINGLE MONO AND STEREO JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
3.5MM SINGLE MONO AND STEREO JACKS (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
3.5MM SINGLE MONO JACKS 119
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
3.5 mm SINGLE MONO JACKS
35PM1
35PM2A
FEATURES
MATERIAL
Mounting Bushing: Nickel-plated copper alloy.
Insulating Spacers: Rigid plastic.
• 2-conductor phone jacks similar to Littel-Jax®
phone jacks, but smaller.
• For connecting in limited space
Springs: Copper alloy.
• Mate with 3.5 mm phone plugs
Sleeve Terminal: Tin-plated copper alloy.
Hardware: Supplied with one, Number P11501
nickel-plated brass locknut, and one, Number S17901
nickel-plated steel flat washer.
• Notched insulators interlock internal parts
• Mounting hole: .250" diameter in panels up to .125" thick
(mounting hardware supplied)
• For insulated mount, order two washers separately,
Number S1564 (swedged fiber washer .312" diameter
mounting hole) and number S2207 (flat phenolic washer)
TYPICAL
MATING
PLUG
PART
NUMBER
JACK
SCHEMATIC1
DESCRIPTION
Open circuit
SPECIFICATIONS
MECHANICAL
Life: 5,000 insertion/withdrawal cycles, minimum
35PM1
I
750
750
35PM2A
Shunted (closed circuit)
III
ELECTRICAL
1. See jack schematics on pages 79 and 80.
Contact Resistance: .075 ohms maximum
Insulation Resistance: 5,000 MΩ minimum
Dielectric Withstanding Voltage: 250V AC maximum
Contact Rating: .25A, 48V DC
ORDERING INFORMATION
1. Order by part number.
2. Contact Switchcraft for more information.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
120 2.5MM SINGLE MONO AND STEREO JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
2.5MM SINGLE MONO AND STEREO JACKS
Switchcraft introduces a new series of 2.5mm jacks. These low
profile jacks come in a wide variety of circuits, both 2 and
3 conductor versions. Circuits include mono closed, stereo open,
stereo tip closed and ring open, and stereo closed. The MDSMT
Series is available on tape and reel only. Contact Switchcraft for
exact dimensions of the reels. They’re designed for use in today’s
electronic equipment that features remote speakers, headsets, and
headphones. While they are more compact than commonly used
PC mount phone jacks, they are still extremely durable.
FEATURES AND BENEFITS
• SMT mounting
• Tape and reel packaging
• Wide variety of circuits
MDSMT4BRATR
APPLICATIONS
• Computer
• Video Cameras
• Personal/Portable Audio Devices
• Multimedia
SPECIFICATIONS
Electrical Current Rating: 3A
Contact Resistance: <50 mohms
Insulation Resistance: 100 mohms (min.)
Dielectric Withstanding Voltage:
250VAC @ 1 minute
MECHANICAL
Lifecycles: 5,000
Operating Temperature: -25°C to +85°C
MATERIAL
Housing: Black thermoplastic
Sleeve, Ring and Tip Terminals:
Copper Alloy, silver-plated
Shunt Terminal: Copper Alloy, Silver-plated
2.5MM SINGLE MONO
AND STEREO JACKS
Part Number/Description
MDSMT2BRATR
Stereo, dual open circuit
MDSMT2ARATR
Mono, closed circuit
MDSMT3BRATR
Stereo, tip closed and
ring open circuit
MDSMT4BRATR
Stereo, dual closed circuit
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
121
SUBMINIATURE PHONE JACKS
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
.101" SUBMINIATURE PHONE JACKS
TR2A
TR1PC
MDPC2A
MDSL2A
MDSL2ARA
MDPC2ARA
SUBMINIATURE PHONE JACKS, TR2A AND TR1PC
Extremely small, rugged, shunted Micro-Jax® 2-conductor jack is 1/4 the
size of a standard phone jack and weighs less than 1/20 ounce. Can be
wired for open or closed circuit operation. Internally keyed insulators
interlock all parts and tip springs grip mating plugs positively. Mates
with Switchcraft Micro-Plug® phone plugs. Jacks mount through
.190" diameter hole in chassis/panels up to .093" thick. For insulated
mounting, a .281" diameter hole and .050" maximum panel thickness
applies. Order insulating washer separately. Number P1617
(flat phenolic washer) and Number P1618 (swedged fiber washer).
MECHANICAL - TR1PC:
Life: 10,000 insertion/withdrawal cycles, minimum.
Insertion/Withdrawal Forces: 11 ounces insertion,
11 ounce minimum withdrawal.
ENVIRONMENTAL - TR1PC:
Thermal Range: -55°C to +85°C (non-operating);
-20°C to +65°C (operating).
Thermal Shock: Per MIL-STD-202, method 107.
Humidity: Per MIL-STD-202, method 106.
Salt Spray: Per MIL-STD-202, method 101.
Number TR1PC: 2-conductor closed circuit jack with PC
terminals. Open frame and enclosed versions available. Mates with
Switchcraft® Micro Plug® numbers 850, 855, and 880.
SPECIFICATIONS - MICRO-D JAX
MECHANICAL:
Life: 10,000 insertion/withdrawal cycles minimum.
Insertion/Withdrawal Forces: 11 ounce insertion,
11 ounce minimum withdrawal.
SUBMINIATURE ENCLOSED PHONE JACKS
Micro-D Jax® 2-conductor jacks have insulated box construction and
subminiature size.
Number MDPC2A: 2-conductor closed circuit jack with PC
terminals. Mounts to single-, double-sided or multilayer boards either
singly or in rows as close as .344" centers (+/- .01 inches). Bushing is
.10" inside diameter.
ELECTRICAL:
Contact Resistance: .010 ohms maximum (initial), .020 ohms
maximum (after humidity, durability exposure), .10 ohms
maximum (after salt spray).
Insulation Resistance: 10,000 MΩ minimum (initial),
1,000 MΩ minimum (after humidity, durability exposure).
Dielectric Withstanding Voltage: 500 V AC maximum.
Contact Rating: .125 A, 125 V AC.
Number MDSL2A: Same as MDPC2A except, 1. solder lugs, 2.
bushing is #10-48 threaded (nut and washer supplied), and 3. mount
ing centers are .35" or .313". When mounted on .313" centers, sleeves
or adjacent jacks may be in intimate contact. Mounts through a .203"
diameter hole in chassis/panels up to .063" thick.
ENVIRONMENTAL:
SUBMINIATURE RIGHT-ANGLE PHONE JACKS
2-conductor jacks have molded housing which protects all internal
parts. Panel/chassis or PC boards mounting in rows, if desired, on
.351" centers. PC terminals need only .382" behind-panel clearance.
Thermal Range: -55°C to +85°C (non-operating);
-20°C to +65°C (operating).
Thermal Shock: Per MIL-STD-202, method 107.
Humidity: Per MIL-STD-202, method 106.
Salt Spray: Per MIL-STD-202, method 101.
Number MDPC2ARA: PC terminals mount/terminate directly to PC
or multilayer boards. Bushing clears a .156" diameter panel hole.
MATERIAL:
Number MDSL2ARA: Right-angle solder lugs and #10-48 threaded
bushing for chassis/panel mount. Mounts in .203" diameter hole in
chassis/panels up to .063" thick.
Housing: Glass reinforced plastic. Insulation: Rigid plastic.
Mounting Bushing (Micro-D): Nickel-plated copper alloy.
Mounting Bracket (Right-Angle Micro-D):
Nickel-plated copper alloy.
SPECIFICATIONS - MICRO-JAX® ELECTRICAL:
Contact Resistance: .10 ohms maximum (spring to plug).
Shunt Resistance: .10 ohms maximum.
Dielectric Withstanding Voltage: 250 V AC.
Shunt Tension: 60 grams minimum.
Tip Spring: Silver-plated copper alloy.
Shunt Terminal: Silver-plated copper alloy.
Sleeve Terminal (Micro-D): Steel, tin-plated.
Sleeve Terminal (Right-Angle Micro-D): Silver-plated
copper alloy.
Hardware (Micro-D): Same as Micro-Jax (MDSL2A).
Hardware (Right-Angle Micro-D): Hex nut, nickel-plated
copper alloy, Number P15331; flat washer, nickel-plated
copper alloy S29571; not supplied with MDPC2A.
MATERIAL:
Mounting Bushing: Nickel-plated copper alloy.
Insulating Spacers: Rigid plastic.
Springs: Nickel-plated copper alloy. Integral contacts are plated.
Tip, Shunt and Sleeve Terminals: Silver-plated copper alloy.
Hardware: Supplied with one, P15331 nickel-plated copper alloy
hex nut, and one S29571 nickel-plated copper alloy flat washer.
Part
No.
Jack
Typical
Part
Jack
Typical
Schem.1 Mating Plug2 No.
Schem.1 Mating Plug2
TR2A
TR1PC
MDPC2A
MDSL2A
MDPC2ARA
MDSL2ARA
MATERIAL - TR1PC
Threaded Bushing: Nickel-plated copper alloy.
Tip Spring: Copper alloy.
III
850
III
850
}
}
All are 2-Conductor (closed circuit). Note 1.: See Jack Schematics page 79
and 80. Note 2.: See Plugs Section for mating information.
Sleeve/Ground Terminal: Copper alloy tin-lead with nickel underplate.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
122 SUBMINIATURE PHONE JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
.101" SUBMINIATURE PHONE JACKS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
PHONO JACKS
123
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
BULKHEAD PHONO JACKS
3501F
3501FP
3501FR
BPJF01
3514PC
3515PC
3517PC
BPJR01
BPJJ01
3505F
3503
FEATURES AND BENEFITS
SPECIFICATIONS
• Front or rear mount configurations
• Durable plated machined brass construction
• All mounting hardware is included
Material and Platings Housing:
Nickel or Gold-plated Brass
Contact: Nickel-plated Brass Insulator: ABS
Hardware: Nickel-plated Brass. Switchcraft introduces a
complete line of bulkheadmount phono (RCA) jacks to meet the
most critical audio, audio/video, and general-purpose electronic
applications. These jacks are offered in front and rear mount
solder type as well as jack to jack bulkhead configurations.
These jacks are available with black, white, blue, green, red,
and yellow insulators and nickel or gold plated bodies. All
mounting hardware is included.
Housing: Nickel or gold plated, copper alloy
(3514PC, 3515PC, 3517PC: Nickel plated, steel)
Terminals: Nickel plated, copper alloy (3515PC: Tin plated,
copper alloy)
APPLICATIONS
• Audio
• Video
• General Purpose Electronics
OPTIONS
• Front or rear mount solder type receptacles
• Jack to jack bulkhead configuration
• Insulator colors
• Gold or nickel plating
Bushing: Nickel-plated, copper alloy (3515PC: Ceramic)
Insulators: Thermoplastic
(See next page for drawings.)
(3517PC: Ceramic and glass filled thermoplastic)
Part Number
BPJR01
BPJR01AU
BPJR02
Description
Rear mount, black insulator
Part Number
BPJF05
BPJF05AU
BPJF06
Description
Front mount, blue insulator
Front mount, blue insulator, gold plated
Front mount, green insulator
Rear mount, black insulator, gold plated
Rear mount, red insulator
BPJR02AU
BPJR03
BPJR03AU
BPJR04
Rear mount, red insulator, gold plated
Rear mount, white insulator
BPJF06AU
3501FP
3505F
Front mount, green insulator, gold plated
Front Mount, natural insulator
RF version, uses low-loss nylon insulation
Rear mount, white insulator, gold plated
Rear mount, yellow insulator
For insulated mounting, order S2207 and S1564 insulating washers
BPJR04AU
BPJR05
BPJR05AU
BPJR06
BPJR06AU
3501F
3501FR
Rear mount, yellow insulator, gold plated
Rear mount, blue insulator
BPJJ01
BPJJ01AU
BPJJ02
BPJJ02AU
BPJJ03
BPJJ03AU
BPJJ04
BPJJ04AU
BPJJ05
Feed through, black insulator
Feed through, black insulator, gold plated
Feed through, red insulator
Rear mount, blue insulator, gold plated
Rear mount, green insulator
Feed through, red insulator, gold plated
Feed through, white insulator
Rear mount, green insulator, gold plated
Rear mount, rigid plastic mounting flange
Rear mount, natural insulator
Feed through, white insulator, gold plated
Feed through, yellow insulator
For insulated mounting, order S1028 and S1029 insulating washers
Feed through, yellow insulator, gold plated
Feed through, blue insulator
BPJF01
BPJF01AU
BPJF02
BPJF02AU
BPJF03
BPJF03AU
BPJF04
BPJF04AU
Front mount, black insulator
Front mount, black insulator, gold plated
Front mount, red insulator
BPJJ05AU
BPJJ06
BPJJ06AU
Feed through, blue insulator, gold plated
Feed through, green insulator
Feed through, green insulator, gold plated
Front mount, red insulator, gold plated
Front mount, white insulator
3503
Extension jack, shielded handle
Front mount, white insulator, gold plated
Front mount, yellow insulator
Front mount, yellow insulator, gold plated
3514PC
3515PC
Vertical PC mount, nickel plated steel bushing
Vertical PC mount, ceramic bushing
3517PC
Horizontal PC mount, nickel plated steel bushing
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
PHONO JACKS
124
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
PHONO JACKS (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
PHONO JACKS AND PHONO JACK SETS 125
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PHONO JACKS AND PHONO JACK SETS
PJRAS1X1S04
PJRAS1X2S02
PJRAN2X1U02
PJRAS2X1S01
PJRAN1X1U03
PJRAN3X1U03
PJRAS3X1S01
PJRAS3X2S01
PJRAS2X2S01
PJRAS4X2U01
PJRAS1X3S01
PJRAN3X1U02
PJRAS1X3U01
Switchcraft, the industry recognized leader in audio-video • Shielding and grounding
connectivity, introduces the addition of a comprehensive line of • Bulkhead mounting screw
PCB Mount RCA Jacks and Jack Sets. Switchcraft’s newest • Colors
product family addresses the requirements of the most critical • Plating
audio and audio/video applications. 1, 2, 3, 4, 6, and 8 position
SPECIFICATIONS
ELECTRICAL
jack sets are offered in a variety of color combinations with
numerous plating, grounding, shielding, mounting, and
Temperature Range: -25 to +80°C
Rated Voltage: 34V DC or AC
Withstand Voltage: 500V
justification options.
FEATURES AND BENEFITS
• High temperature plastic housings and long life contacts
• Snap fit PCB contacts and housings
• Low profile footprint
Rated Current: 2A DC or AC
Dielectric Strength: 500V AC @ 1 minute
Contact Resistance: <30 mohms
Insertion Force*: <29.4N
• Numerous options and configurations
Extraction Force*: 1N to 29.4N
* Depends Upon Mating Plug
APPLICATIONS
• Audio
• Video
MATERIAL AND PLATINGS
Housing: UL94-HB Rated, ABS
Insulators: ABS
Ground Shell and Terminal: Nickel or Gold Plated, Copper Alloy
Terminals: Tin Plated Copper Alloy
• General Purpose Electronics
OPTIONS
• Right angle and straight PCB mount
• Horizontal and vertical justification
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
126 PHONO JACKS AND PHONO JACK SETS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
PHONO JACKS AND PHONO JACK SETS (continued)
2 POSITION PCB MOUNT
1 POSITION PCB MOUNT
Part Number
PJRAN1X1U01
PJRAN1X1U02
PJRAN1X1U03
PJRAN1X1U04
Call factory
Color
Black
White
Red
Part Number
Color
PJRAN2X1U01
PJRAN2X1U02
PJRAS2X1S01
PJRAS2X1S02
PJRAS1X2S01
Red/White
White/Red
Red/White
White/Red
Yellow
Green
Blue
Red
White
Call factory
PJRAS1X2S02
White
Red
PJRAS1X1S01
PJRAS1X1S02
PJRAS1X1S03
PJRAS1X1S04
Call factory
Black
White
Red
4, 6, & 8 POSITION PCB MOUNT
Yellow
Green
Blue
Part Number
Color
PJRAS2X2S01
White x 2
Red x 2
Call factory
PJRAS3X2S01
PJRAS3X2S02
PJRAS4X2U01
White x 3
Red x 3
3 POSITION PCB MOUNT
Red/White/Yellow
Red/White/Yellow
Part Number
Color
PJRAN3X1U01
PJRAN3X1U02
PJRAS3X1S01
PJRAS3X1U03
PJRAS1X3S01
Red/Yellow/White
Red/Green/Blue
Red/White/Yellow
Red/Green/Blue
Red
White x 4
Red x 4
COMBINATION PHONO AND S-VIDEO PCB MOUNT
Part Number
Color
White
Yellow
PJRAN3X1U02
PJRAS1X3U01
Red/White/Yellow
PJRAS1X3S02
Green
Blue
Red
Yellow
White
Red
Ordering Information (Contact factory for color, shielding, grounding, justification options.)
PJ
RA
S
#
X
#
S
01
AU
Phono Jack
RA - Right Angle
ST - Straight
S - Screw(s)
N - No Screws
1,2,3, or 4
By
1,2, or 3
S - Shielded
U - Unshielded
AU/Gold
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
PHONO JACKS AND PHONO JACK SETS 127
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PHONO JACKS AND PHONO JACK SETS (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
128 PHONO JACKS AND PHONO JACK SETS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
PHONO JACKS AND PHONO JACK SETS (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
PHONO JACKS AND PHONO JACK SETS 129
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PHONO JACKS AND PHONO JACK SETS (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
130 RIGHT ANGLE MINIATURE POWER JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
RIGHT ANGLE MINIATURE POWER JACKS
RASM 722
RASM 732P
RASM 712
RASM752STR
RAPC742
RAPC732OF
RASM752TR
RASM742TR
Pin Size* Description
SPECIFICATIONS:
Part Number
RAPC712
RASH712
0.100"/2.5mm
0.100"/2.5mm
Right Angle, PC mount
Right Angle, hybrid mount
Materials: Housing: Thermoplastic
Terminals:
RAPC700:
Sleeve: Silver plated copper alloy
Tip: Nickel plated, copper alloy
RAPC742, RASM742TR, RAPC732OF, RAPC742OF,
RAPC752, RAPC752S, RASM752TR, RASM752STR:
Sleeve and tip: Silver plated tin
Shunt: Silver plated copper alloy
RASM700, RASH700:
Sleeve: Tin plated copper alloy
Tip: Nickel plated copper alloy)
RASM712
RAPC722
RASH722
RASM722
RAPC732
RAPC732OF
RASH732
0.100"/2.5mm
0.080"/2.0mm
0.080"/2.0mm
0.080"/2.0mm
0.050"/1.3mm
0.050"/1.3mm
0.050"/1.3mm
0.050"/1.3mm
0.040"/1.0mm
0.040"/1.0mm
0.040"/1.0mm
Right Angle, SMT mount
Right Angle, PC mount
Right Angle, hybrid mount
Right Angle, SMT mount
Right Angle, PC mount
Right Angle, PC mount1
Right Angle, SMT mount
Right Angle, hybrid mount
Right Angle, PC mount
Right Angle, PC mount1
Right Angle, SMT mount2
RASM732
RAPC742
RAPC742OF
RASM742TR
RAPC752
RAPC752S
RASM752TR
ELECTRICAL
Current Rating: 3A
(RAPC700, RASH700, RASM700: 5A)
Contact Resistance: <50 mohms
Insulation Resistance: 100 mohms min.
(RAPC700, RASH700, RASM700: 30 megohms
@100V DC)
0.025"/0.65mm Right Angle, PC mount
0.025"/0.65mm Right Angle, PC mount3
0.025"/0.65mm Right Angle, SMT mount2
RASM752STR 0.025"/0.65mm Right Angle, SMT mount4
Note: Contact factory for specific information on tape and reel options. *Pin Size
(in/mm) 1. Open Frame 2. Tape and Reel. 3. Shielded 4. Tape and Reel, Shielded.
Note: Available with P locating post as an option.
Dielectric Withstanding Voltage: 250 VAC@ 1 minute
Note: Available with tin-plating as a special order.
Note: Available with Hi-temp material, contact factory for details.
MECHANICAL:
Lifecycles: 5,000 min.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
RIGHT ANGLE MINIATURE POWER JACKS
131
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
RIGHT ANGLE MINIATURE POWER JACKS (continued)
RAPC 712/722/732
RASM 712/722/732
RASH 712/722/732
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
132 RIGHT ANGLE MINIATURE POWER JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
RIGHT ANGLE MINIATURE POWER JACKS (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
RIGHT ANGLE MINIATURE POWER JACKS 133
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
RIGHT ANGLE MINIATURE POWER JACKS (continued)
RAPC752
RASM752TR
PC BOARD LAYOUT
COMPONENT SIDE
PC BOARD LAYOUT
COMPONENT SIDE
RAPC752S
RASM752STR
PC BOARD LAYOUT
COMPONENT SIDE
PC BOARD LAYOUT
COMPONENT SIDE
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
134 STRAIGHT MINIATURE POWER JACKS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
STRAIGHT MINIATURE POWER JACKS
712A
PC712A
L722A
2C1072
L712RA
Insulators: Rigid Plastic
Hardware: Supplied with one P2439 nickel plated copper
alloy hex nut, and one P2441 nickel plated steel flat washer
FEATURES:
• Automatic switch over from AC to DC
permitted by sleeve shunt spring.
• Split center pin shaped to hold mating plug firmly.
• Bushing length available as 0.219" or extended
0.319" to permit use in thicker panels.
• Non-turn mounting possible using standard
“D” shape bushing.
• Insulated mounting hardware available.
• Right angle versions offer “kinked” PC
terminals for added board retention.
ELECTRICAL:
Current Rating: 5A, 12V DC resistive
Contact Resistance: 0.01 Ohms max. (initial),
0.02 Ohms max. (after humidity, durability exposure),
0.10 Ohms max. (after salt spray)
Insulation Resistance: 10,000 Mohms min. (initial),
1,000 Mohms min. (after humidity, durability exposure)
Dielectric Withstanding Voltage: 500 VAC max.
MATERIALS:
Housing: Thermoplastic
Bushing: Plated copper alloy
Terminals: Plated copper alloy
MECHANICAL:
Lifecycles: 10,000 cycles min.
Part Number
Pin Size*
Description
Typical Mating Plug
712A
712RA
L712A
L712RA
PC712A
PCL712A
722A
722RA
L722A
L722RA
PC722A
PCL722A
732A
732RA
PC732A
2C1072
0.100"/2.5mm
0.100"/2.5mm
0.100"/2.5mm
0.100"/2.5mm
0.100"/2.5mm
0.100"/2.5mm
0.080"/2.0mm
0.080"/2.0mm
0.080"/2.0mm
0.080"/2.0mm
0.080"/2.0mm
0.080"/2.0mm
0.050"/1.3mm
0.050"/1.3mm
0.050"/1.3mm
Solder lugs
760
760
761K
761K
760
761K
S760
S760
S761K
S761K
S760
S761K
860
Right angle PC terminals
Solder lugs, long bushing
Right angle PC terminals, long bushing
Straight PC terminals
Straight PC terminals, long bushing
Solder lugs
Right angle PC terminals, long bushing
Solder lugs, long bushing
Right angle PC terminals, long bushing
Straight PC terminals
Straight PC terminals, long bushing
Solder lugs
Right angle PC terminals
Straight PC terminals
Jack covers for 712A and 722A
860
860
Note: For insulated mounting order P2442 phenolic flat washer and S4263 swedged fiber washer.
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
STRAIGHT MINIATURE POWER JACKS
135
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
STRAIGHT MINIATURE POWER JACKS (continued)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
136 VJ SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
See page 193 for Patch panel information.
VJ SERIES
VJHD*75TX
Ordering–Individual Jacks
Part Number
VJHD*75TX
VJHD*NTX
VJSD*75TX
VJSD*NTX
Type
HD
HD
SD
Description
Terminated
Non-terminated
Terminated
VPP24K3HD75T
SD
Non-terminated
*Add “N” for non-normalled version
FEATURES AND BENEFITS
• HD Series meets SMPTE 292M Specifications
• SD Series has a bandwidth from DC to 1.75GHz
• Jacks feature rugged heavy duty housings
SMITH CHART
(TYPICAL)
VIDEO JACK SPECIFICATIONS
ELECTRICAL
Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD)
Characteristic Impedance: 75 ohms
Return Loss: Better than –15 dB
Insertion Loss: Better than –.5 dB
Contact Resistance: Less than 20 milliohms
Termination Resistance: 75 W, ±1%
Center Conductor: Accepts .090 pin diameter
MECHANICAL
Mechanical Shock: Per MIL-STD-202,
Method 213, Test condition I
Vibration: Per MIL-STD-202, Method 201
Insertion Force: 12 lbs. maximum
Withdrawal Force: 3 lbs. minimum
Life Cycle: 30,000
MATERIAL
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy, gold plated
Switching Springs: Copper alloy, gold plated
Grounding Contacts:
HD Series - Copper alloy, gold plated
SD Series - Copper alloy, nickel plated
Insulators: Thermoplastic, UL 94V-0 rated
NON-NORMALLED
TERMINATED
NORMALLED
TERMINATED
NORMALLED
NON-TERMINATED NON-TERMINATED
NON-NORMALLED
ENVIRONMENTAL
Operating Temperature: – 40ºC to 65ºC
Storage Temperature: – 55ºC to 85ºC
Thermal Shock: Per MIL-STD-202,
Method 107
Moisture and Humidity:
Per MIL-STD-202, Method 106.
The HD Series meets SMPTE 292M
specifications for high definition video
signaling, covering a bandwidth range
from DC to 2.4GHz. The SD Series is
perfect for serial digital, with a bandwidth
from DC to 1.75GHZ.
FREQUENCY (MHz)
FREQUENCY (MHz)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
MVJ SERIES
137
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
See page 196 for Patch panel information.
MVJ*75T
MVJ SERIES
FEATURES AND BENEFITS
• Midsize video jacks rated from DC to 3 GHz
• Available in terminated or non-terminated configurations
MIDSIZE VIDEO JACK SPECIFICATIONS
ELECTRICAL
Rated Bandwidth: 3.0 GHz
MVP32K3*75T
Characteristic Impedance: 75 ohms
Return Loss: See Typical Return Loss Chart
Insertion Loss: See Typical Insertion Loss Chart
Contact Resistance: Less than 20 milliohms
Termination Resistance: 75 W, ±1%
Center Conductor: Accepts .048 pin diameter
MECHANICAL
Ordering Information
Part
Mechanical Shock: Per MIL-STD-202,
Method 213, Test condition I
Vibration: Per MIL-STD-202, Method 201
Insertion Force: 12 lbs. maximum
Withdrawal Force: 3 lbs. minimum
Life Cycle: 30,000
Number
MVJ*75T
MVJ*NT
Jack
HD
HD
Description
Terminated
Non-terminated
*Add “N” for non-normalled version
MATERIAL
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy, gold plated
Switching Springs: Copper alloy, gold plated
Grounding Contacts: Copper alloy,
gold plated
BNC Insulators: Teflon
Actuators: Thermoplastic, UL94V-0 rated
ENVIRONMENTAL
Operating Temperature: – 40ºC to 65ºC
Storage Temperature: – 55ºC to 85ºC
Thermal Shock: Per MIL-STD-202,
Method 107
Moisture and Humidity:
Per MIL-STD-202, Method 106
SMITH CHART (TYPICAL)
RETURN LOSS (TYPICAL)
RETURN LOSS (TYPICAL)
FREQUENCY (MHz)
FREQUENCY (MHz)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
"
138 MIL-TYPE 1/4 PHONE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MIL-TYPE 1/4" PHONE PLUGS
3-CONDUCTOR
2-CONDUCTOR
482, 483
4
430
480 (.
440, 4
484 (.206")
FEATURES
SPECIFICATIONS
Designed for high quality communication equipment to meet
military requirements, This series features one-piece tip rod
and one-piece sleeve and plug body, assembled together into
a mode as inserts, providing a finished plug with complete
continuity of thermoplastic insulation between top rod and
plug sleeve. Internal (invisible externally) interlock mechanically
engages the metal and plastic components providing a
realistic lock to prevent parts shifting. Design and material in
accordance with MIL-P-642(A), MIL part number molded or
stamped on handle, manufacturer’s trademark (as required
by MIL specification) appears on plug body.
Tip Rod, Body and Screws: Copper alloy, natural finish.
Terminals: Tinned copper alloy.
Insulation: Thermoplastic, per MIL-P-22985, Type II, Class 1.
Handles: Thermoplastic, Type 6, per MIL-M-20693, Type II.
Shielded; machined from copper alloy, nickel-plated.
STRAIN RELIEF CLAMP
For MIL-type Littel-Plug phone plugs. P2380 conforms to
Specification SC-A-7674-F - supplied with Plug Numbers 430, 440,
445 and 470. P2381 meets Specification MS-35762 - supplied with
Plug Number 480 and Extension-Jax® phone jack, Number 820.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
LITTEL PLUG® PHONE PLUGS
139
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
LITTEL PLUG® PHONE PLUGS
Number
483NCP
Number
482NCP
Number
485NC
FEATURES AND BENEFITS
• 3 conductor plug
• Designed for high quality communication
equipment
• One-piece tip rod ensures electrical continuity
• Brass plug finger versions meet MIL specifications
• ‘N’ and ‘NC’ suffix versions have nickel-plated
plug fingers, excellent for audio applications
• ‘NC’’ suffix option has rugged, heavy duty
cable clamp, solder terminals for easier
solderability and assembly. Metal shielded handle
• ‘NCP” - plastic handle
SPECIFICATIONS
Plug Finger: Brass, natural finish or nickel-plated
Terminals: Brass, electro-tinned
Insulation: Ethyl cellulose, per MIL-P-22835, Type II,
Class 1, or acetal resin
Handles: Plastic-nylon molding plastic, Type 6,
per MIL-M-20693, Type II. Shielded metal handle with red,
black or nickel finish
ORDERING INFORMATION
1. Order by part number.
2. Contact Switchcraft for more information.
3. Mating jacks available.
PART NO. 482NC, 482NCP, 483NC, 483NCP, 485NC
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
140 LITTEL PLUG® PHONE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
LITTEL PLUG® PHONE PLUGS
MIL
Part Number
None
Part Number
482N
Conductors
Terminals
Screw
Handle
Red
Notes
Plastic handle, nickel
plated plug finger
3
482NC
482NCP
483N
3
3
3
3
3
3
Cable Clamp
Cable Clamp
Screw
Shielded
Red
None
None
None
None
None
None
Red metal handle, nickel
plated plug finger
Plastic handle,nickel
plated plug finger
Plastic handle, nickel
plated plug finger
Black metal handle,nickel
plate plug finger
Black plastic handle, nickel
plated plug finger
Nickel plated handle,nickel
plated plug finger
Black
483NC
483NCP
485NC
Cable Clamp
Cable Clamp
Cable Clamp
Shielded
Black
Shielded
480 SERIES PART NUMBERING CHART
Part
number
480
206" dia. 1/4" dia.
Brass
Nickel
finger
Handle
Material
Plastic
Plastic
Plastic
Metal
Red
Black
handle
•
Nickel
Standard
Large
finger
finger
finger
handle
handle
cable clamp
cable clamp
•
•
•
•
•
•
482
•
•
•
•
•
•
•
•
•
•
•
•
482N
•
•
•
482NC
482NCP
483
•
•
Plastic
Plastic
Plastic
Metal
•
•
•
•
•
•
•
•
483N
•
•
•
483NC
483NCP
484
•
•
Plastic
Plastic
Metal
•
•
•
485NC
•
•
•
•
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
"
MIL-TYPE 1/4 PHONE PLUGS 141
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MIL-TYPE 1/4" TWIN PHONE PLUGS
Number 411
Number 414
Number 412
Number 415
Fingers of 414 are .25" diameter and mate with Switchcraft
type MT389 Twin-Jax®, MT333B, MT336 MT-Jax®, and other
jacks having .25" inside diameter sleeves and mounted
on .625" centers. 415 has a .25" diameter finger and a .206"
diameter finger to provide automatic polarization. Fingers mate
with Switchcraft MT332B and MT342B MT-Jax, respectively.
FEATURES
Design and material strictly in accordance with Specification
MIL-P-642(A), MIL part number molded or stamped on
handle, manufacturer’s trademark (as required in MIL
Specification) appears on plug body. Ideal for use in broadcast
and recording studios, military, industrial and telephone
switchboard applications, instrumentation and telemetry.
STRAIN RELIEF CLAMP
Individual plugs, featuring one-piece tip rod and one-piece
sleeve and plug body, with complete continuity of
thermoplastic insulation between plug elements, are placed
into handles to provide a double Twin-Plug® plug (two
electrically-independent 2-conductor plugs spaced .625"
center-to-center, with self-alignment feature). 411, 414 and
415 Twin-Plug plugs have provision for use of Cord Clamp
Number S2674. 412 Twin-Plug has external Cord Anchor.
Natural brass. For use only with 411, 414, 415 Twin-Plug,
S2674.
SPECIFICATIONS
Tip, Rod, Ring Sleeve, Body, Screws: Copper alloy, natural
finish. Number 412 Handle Screws - iridescent iridite overplating.
Terminals: Tinned copper alloy. (Latest MIL Specifications
no longer specify terminals; terminal furnished is the type
referenced as TM-89).
6-conductor Twin-Plug, 414 and 415, provide two
electrically-independent 3-conductor plug fingers spaced on
.625" centers. Fingers are insulated from each other and each
provides tip, ring and sleeve connections. Black plastic handle
is notched to indicate polarity. Accepts standard 6-conductor
cables. Handle has provision for use of Cord Clamp, S2674.
Insulation: Thermoplastic; per MIL-P-22985, Type II, Class 1.
Handle: Thermoplastic on 411, 412, 414 and 415, per
MIL-P-22985, Type II, Class 4. Molded black thermoset
plastic per MIL-M-14F.
Part No. Conductors
Terminals "Typical Mating Jack1"
Mil No.
Notes
411
412
414
2
2
3
Screw
Screw
Screw
MT388
MT388
MT389
M642/9-1
Provision for internal cord clamp (not included)
MILPJ289. Similar to WECo289B
---
---
6-circuit plug, 2 electrically-independent 3 conductor
fingers, .25" fingers. Provision for internal cord clamp
(not included) Similar to WECo 338A. 425A-3
415
3
Screw
MT332B &1, MT342B
---
6-circuit plug, 2 electrically-independent 3 conductor
fingers, one .25" finger, one .206" finger. Provision for
internal cord clamp (not included)
1. Switchcraft Part Numbers. See Jacks Section for other mating jacks.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
"
142 MIL-TYPE 1/4 EXTENSION JACKS AND TELEPHONE PATCH ADAPTERS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MIL-TYPE 1/4" EXTENSION JACKS
Number 820
FEATURES
Cable jack meets requirements of Specification MIL-J-641(A), Type
Number JJ-026. Mates only with MIL-type plugs PJ-054 and PJ-540.
Switchcraft 430.
SPECIFICATIONS
Body and Terminal Screws: Copper alloy, natural finish.
Springs: Punched from special copper alloy.
Stack Insulation: Rigid plastic spacers Rigid plastic tubing.
Handle: Same as plug handle above.
Stack Screws: Stainless steel.
Part
Number
820
Typical Mating
Plug1
Handle
Part Number
M1015
MIL
Part Number
M641/4-1
Conductors
Terminals
Screw2, 3
Handle
Black
2
430
1. Switchcraft Part Number See Jacks Section for mating jacks. 2. Switchcraft replacement screw. P1070, Terminal P1069 (2 each required)
3. See previous page for strain relief clamp.
TELEPHONE PATCH ADAPTERS
TAD3
TAD2
3-conductor
2-conductor
FEATURES
SPECIFICATIONS
Compact patch adapters convert standard full-size phone jacks to Tip Rod, Ring, Sleeve Body and Screws: Copper alloy,
standard miniature phone jack connections with maximum natural finish.
convenience and reliability at a minimum cost. Eliminates
cross-patching problems and need for combination patch cords with
standard phone plug on one end and a miniature phone plug on the
other. Adapters are 100% compatible with Switchcraft®
telephone type and military phone jacks and miniaturized
tini-telephone patching system components, as well as equivalent
industry standard phone plugs.
Insulation: Injection-molded plastic.
Jack Springs: Formed copper alloy.
Screw, Spring Retaining:
TAD2 - #2-64, steel. Part Number P1616 (one required).
TAD3 - #2-64, brass. Part Number P1070 (two required).
Ring Insulations (TAD3 only): Kraft paper sleeve.
Handle: Molded blue thermoplastic with die-stamped
identification legend. TAD2 Handle, (Part Number M1487),
and Retaining Screw, (Part Number T1677), one required.
TAD3 Handle, (Part Number M1488), and Retaining Screw,
(Part Number T1990), one required.
TAD2 – 2-conductor adapter. Plug finger meets specifications for
MIL plug PJ-047 (MIL-P-642). Fits Switchcraft T-Jax®, M-Jax®,
MIL-approved MT-Jax®, and other industry-standard phone jacks
with .250" inside diameter sleeves. The .552" diameter handle
accommodates jacks on .625" centers. For quick identification,
TAD-2 is stamped on the blue handle - will not wear off with
constant use. Miniature 2-conductor jack built into plug body,
accepts miniature phone plugs with .173" diameter fingers, such
as Switchcraft tini-telephone® plugs, Series TT200 and TT250,
and other standard miniature telephone plugs. TAD3 is a
3-conductor version of TAD2. Finger configuration meets
requirements of PJ-051 (MIL-P-642). Finger incorporates dead
ring to minimize plug and jack wear. Blue handle has diameter
of .444".
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
MINIATURE TELEPHONE PLUGS 143
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MINIATURE TELEPHONE PLUGS
TT253NC
TT253 and TT254
TT251 and TT252
Removing handle from plug body can be
easily accomplished by lightly squeezing
the knurled area of the handle and
twisting 30° counter-clockwise.
Patch cords such as Switchcraft Series TT700 (or other .216"
diameter cable) are easily attached to Series TT250 by screw
terminals.
.173" MINIATURE PHONE PLUGS FEATURES
2- and 3-conductor miniature non-shorting telephone plugs
designed for use with TT-Jax®, Unijax®, and other phone jacks
with a .176" inside diameter bushing. Approximately 1/2 the
size of standard phone plugs, yet retains the uniformity,
dependability and quality of MIL-type phone plugs.
FEATURES AND BENEFITS
• Designed for pro audio applications
• 3 Conductor
TT-Plug® Miniature Telephone Plugs are the first to offer
2- and 3-conductors in an attachable type with twist handles
for quick assembly. Series TT250 phone plug is available with
red or black handles. Other color handles available on special
order. Also available with nickel-plated plug fingers. (Add “N” to
part number: 253N, 254N).
• .173" (4.40mm) plug finger diameter
• One-piece tip rod ensures high reliability
• Complete continuity of thermoplastic insulation
between conductors
• Internal keying of all parts preventing shifting
and shorting
• Solder terminals for easier termination and assembly
• Large cable clamp for shield termination and strain relief
• Black or red handles
The TT253NC and TT254NC offer the same nickel-plated plug
fingers as the ‘N’ versions, but also includes cable clamps and
solder terminals for easy assembly.
Plugs feature a one-piece tip rod, ring and a one-piece sleeve
with integral plug body, assembled together into a mold as
inserts. Providing complete continuity of thermoplastic insula-
tion between tip rod, ring and sleeve. Internal interlock of all
parts prevents shifting and shorting under extreme rugged
usage.
Internal 12-24 threads in end of plug body are intended for
threading over outer jacket of a patch cord to provide a supe-
rior cable anchor.
SPECIFICATIONS
Tip Rod, Ring, Sleeve and Body: Copper alloy,
natural finish.
Terminals and Terminal Screws: Copper alloy,
natural finish.
Insulation: Thermoplastic. Handle: Molded plastic
Part
Handle
Handle
Number
Conductors
Terminals
Color
Part Number
Description
TT251
TT252
TT253
TT253N
TT253NC
2
2
3
3
3
Screw
Screw
Screw
Screw
Solder
Black
Red
Black
Black
Black
T2302
T2315
T2307
T2324
T2324
Mil-type M642/13-1
Nickel-plated plug
Nickel-plated plug,
tinned solder terminals
Mil-type M642/13-2
Nickel-plated plug
Nickel-plated plug,
tinned solder terminals
TT254
TT254N
TT254NC
3
3
3
Screw
Screw
Solder
Red
Red
Red
T2301
T2325
T2325
2P2003
3
Screw
None
None
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
"
144
.173 MINIATURE TELEPHONE PLUGS BANTAM TYPE
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
.173" MINIATURE TELEPHONE PLUGS BANTAM TYPE
FEATURES
Miniature telephone twin plugs with two 2-conductor or two
3-conductor fingers, designed to mate with TT Twin-Jax®,
TT-Jax®, and other phone jacks with a .176" inside diameter
TT263
bushing and compatible tip and ring springs. Approximately
TT261
1/2 the size of standard phone plugs; yet retains uniformity,
dependability of high-quality phone plugs. The phone plugs
are exceptionally light, small and rugged. Plug fingers can
easily be removed and replaced.
• Minimum Space: Plugs fit .313" centers, horizontally
or vertically.
• Self-Aligning: Plug fingers compensate for minor
variations in jack spacing.
TT261
• Polarizing: Handle notches identify location of each finger.
• Tip Monitoring: Handle ports permit probe insertion to
monitor tip circuits.
• Terminating and Looping Plugs: OEMs can fabricate
cross-wired plugs, i.e., tip-to-sleeve, tip-to-ring, etc.,
according to individual requirements. OEMs can also
wire-in resistors, RCL networks, etc. for standard and
special terminating applications. Switchcraft will build
looping and terminating TT-Twin Plugs on special order,
where quantities warrant.
TT263
• Sleeve Plugs: For looping, terminating and single cable
applications, sleeve plugs seal off unused handle open-ing(s).
Sleeve plugs also make a bridged (common) sleeve
connection by holding braided shield in place in second
plug.On special order, TT-Twin Plugs can be supplied
with one 2-conductor finger and one 3-conductor finger.
TT263: 6-circuit plug consists of two electrically-independent
3-conductor fingers with black handle. Can use single or dual
cables for two electrically-independent 3-conductor fingers or
common tip, ring and/or sleeve circuits.
• Ease of Assembly/Disassembly: Refer to illustration below
for assembly/disassembly procedure; no handle retaining
screws required. Tip and ring terminations are screw-type
screws supplied).
Typical
Mating
Handle
Part
Number
T2300-2
T2316
Part
MIL Type
Number
–
Number1 Cond. Terminals Jack2
Handle
Black
Black
TT261
TT263
2
3
TT31
TT32B
Screw3
M642/13-3
SPECIFICATIONS
1. TT-Twin Plug plugs can be supplied with one, 2-conductor plug finger and
one, 3-conductor plug finger in the same handle (on special order).
2. Switchcraft Part Numbers. See additional mating jacks in this section.
3. Switchcraft Replacement screw P2240, Terminal P2642. 2 each required
with 2-conductor twin plugs; 4 each required with 3-conductor twin plugs.
4. Replacement Hole Plug Switchcraft T2318 (Black) T2319 (Red).
Tip Rod, Ring, Sleeve and Body: Copper alloy,
natural finish.
Terminals and Terminal Screws: Copper alloy,
natural finish.
Insulation: Thermoplastic.
Handle, Sleeve Plugs: Molded plastic.
LIP
NOTCH
BRAIDED
SHIELD
1.
2. & 3.
1. DISASSEMBLY: Place plug on edge as shown. Push down
and back on metal lip on finger (inside notch) with small
screwdriver and slip plug finger out of handle. Turn plug
over and repeat for other finger.
FINGER
4. LIP ON
NOTCH
FINGER
2. CABLE INSTALLATION: Fold braided shield on cable back
over insulation. Insert leads through rear of plug finger, and
screw finger (clockwise) onto cable with twisting motion
until lead terminations lineup with threaded tip and/or ring
openings. Fasten terminals on both fingers with screws
provided.
GROOVE
INTERNAL RIB
3. To bridge sleeves (common connection), place free end of
braided shield in remaining finger sleeve opening. Press
sleeve plug firmly in place.
4. ASSEMBLY: Align grooves in fingers with internal handle
ribs and insert fingers into rear of handle. Push fingers in
until lips or rear of fingers snap into notches on handle.
TT261: Two electrically-independent 2-conductor fingers in a black
handle. Can be used with single or dual cables for independent tip
circuits with common sleeve or separate sleeve circuits.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
®
"
1/4 COMMERCIAL PHONE PLUGS – LITTEL-PLUG PLUGS 145
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" COMMERCIAL PHONE PLUGS
2-CONDUCTOR LITTEL-PLUG® PLUGS
3-CONDUCTOR LITTEL-PLUG® PLUGS
Numbers 240, 245,
250, 255 (typical)
Numbers 280, 281,
285, 285L, 288 (typical)
Number 260 (typical)
Number 290 (typical)
2-CONDUCTOR PLUGS PART NUMBERS
FEATURES
• Heavy duty machined copper alloy handle (shielded
versions), tip and body for unsurpassed ruggedness.
• Bright nickel plating on exterior surfaces will not chip
or corrode.
• Solder terminals are tin electroplated for ease of soldering.
• One-piece tip rod staked into tip terminal ensures
electrical continuity
• Heavy duty cable clamp provides secure strain relief.
• The proven industry standard phone plug for audio
applications. Beware of imitations!
• Shielded handle versions recommended for applications
where electromagnetic interference and physical abuse
may occur.
Part
Number
Typical
Mating Jack2
Handle Part
Number
Handle*
Black
Terminals
Screw3
Screw3 with
240
◊M1002
◊C240
Black
Cable Clamp
Screw3
Screw3 with
245
Red
Red
◊C245
◊M1003
Cable Clamp
Solder Lug &
Cable Clamp
250
255
Black
Red
◊M1002
◊M1003
11
Screw3
Screw3 with
270
Shielded
Shielded
◊C270
Handle:
T10581
Insulator:
A10071
Cable Clamp
SPECIFICATIONS
Shielded1
Shielded4
Shielded4, 5
Shielded1
Shielded4, 5, 6
280
281
Sleeve, Tip and Body: Nickel-plated copper alloy.
Terminals: Solder lug - Tinned copper alloy.
Screw: Tin-plated (screws size 3-48).
Handles: Molded - black or red plastic. Shielded - machined
Nickel-plated copper alloy. Tubular insulator inside handle.
Solder Lug &
Cable Clamp
285
288
T2323
285L
2P1298
Solder Lug &
Cable Clamp
Without Handle
Screw3
◊2P1495
3-CONDUCTOR PLUGS PART NUMBERS
260
267
269
290
Screw
Black
Black
◊M1002
◊M1002
◊M1003
Solder Lug &
Cable Clamp
Screw3
Red
Shielded
Shielded
Handle:
T10581
Insulator:
A10071
12B
Solder Lug &
Cable Clamp
No. 280 typical – shown with solder lug terminals,
cord clamp and shielded handle.
297
Solder Lug &
Cable Clamp
◊2P1248
Without Handle
* Additional plug handle colors available (P2714) green, (M1111) blue,
(M1235) gray. Fits any plug on which Numbers M1002, M1003 are standard.
1. Wide insulator between tip and sleeve allows use of 2-conductor plug in
3-conductor jack without shorting.
2. Switchcraft Part Numbers. See Mating Jacks Section.
3. Replacement Screw Part Number P10292 (2-conductor plugs require
2 screws; 3-conductor plugs require 3 screws).
4. Unassembled.
5. Larger cable clamp to accommodate larger diameter cables.
6. Handle has .375" (9.53mm) diameter hole to accommodate larger
diameter cables.
◊ Special order only. Contact Switchcraft.
No. 280 typical – shown with screw-type terminals,
plastic handle.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
"
146 1/4 COMMERCIAL PHONE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" COMMERCIAL PHONE PLUGS (continued)
Switchcraft® commercial 2- and 3-conductor phone plugs are
available with a logo handle in addition to the plain handle. The
Switchcraft® name appears prominently on the shielded handle
so the plugs can no longer be easily confused with “copycat”
plugs found on the market today. Knurling on handles provides a
convenient, positive fingertip grip for connect and disconnect.
Plugs are available in the following popular variations:
1. 1/4" diameter finger, 2-conductors.
2. 1/4" diameter finger, 3-conductors.
3. .206" diameter finger, 2-conductors.
Plug handles accept cable up to .290" diameter.
SPECIFICATIONS
Sleeve: Tip and Body: Plated copper alloy.
Terminals: Solder lug: Copper alloy, electro-tinned;
Screw: Tin-plated (screw size #3-48).
Handles: Nickel-plated zinc (tubular insulator inside handle).
PART NUMBERS
NOTE: Plugs have 1/4" finger diameter unless otherwise specified.
Logo
Plain
Typical
Handle Handle
Description
Mating Jack
2-CONDUCTORS
570
580
581
585
270
280
281
285
Screw terminals. Shielded handle.
Solder lug & cable clamp. Shielded handle.
Solder lug & cable clamp. Shielded handle. Unassembled.
Solder lug & cable clamp. Shielded handle. Unassembled. Larger cable clamp
accommodates larger cables.
11
588
288
Solder lug & cable clamp. Shielded handle. Wide insulator between tip and sleeve
makes possible use as a 2-conductor plug in 3-conductor jack without shorting.
S580
S280
Solder lug & cable clamp. Shielded handle. Plug finger has .206" diameter.
S11
3-CONDUCTORS
590
597
598
290
297
298
Screw terminals. Shielded handle.
Solder lug & cable clamp. Shielded handle.
Solder lug & cable clamp. Shielded handle. Locking feature.
12B
12B, 133
1. Other mating plugs are available.
2. Replacement screw, Part Number P10292 (2-conductor requires 2 screws; 3-conductor requires 3 screws).
No. 590 (Typical)
No. 570 (Typical)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
"
1/4 COMMERCIAL PHONE PLUGS 147
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" COMMERCIAL PHONE PLUGS (continued)
2-CONDUCTOR/PLASTIC OR
SHIELDED HANDLES
Popular general purpose plug fits all standard jacks. Available
in both 2- and 3-conductor types. Two-conductor plugs
available with black or red molded plastic, or 3 different
lengths of brass nickel-plated (shielded) handles. 2-Conductor
Special Military Plugs are also available.
Numbers 70, 184
Number 170, 181
FEATURES
• 1-piece tip rod staked into tip terminal insures tightness
of plug.
• All essential conducting members are brass with external
parts nickel-plated.
Number 40
Number 160
• Terminal screws: broad-headed. In production quantities,
screws may be eliminated and terminals hot-tinned for
easier soldering of wire leads to terminals (special order).
• Screw terminals have grooves which accommodate
1 or 2 cord tips.
• Thermoplastic handle insert for greater insulation.
• Plugs accept up to .25" maximum diameter cable
(parallel or shielded cable).
SPECIFICATIONS
Number 40
Sleeve, Tip and Body: Nickel-plated copper alloy.
Terminals: Solder lug: copper alloy, electro-tinned.
Screw: steel, tin-plated.
Handles: Shielded: Nickel-plated copper alloy.
Molded: black or red plastic.
Part
Number
Typical
Mating Jack2
Handle Part
Number
Terminals
Handle
40
Black
M1001
Screw
Handle: T10141
703
Shielded
Shielded
Insulator: A10063
Number 160
(Replacement
Screw Part No.
P10013)
Handle: T10451
160
Insulator: A10061
11 or
Z15J
Without
Handle
_
2 required
◊2P1251
1701
182QB
182QBD
Handle: T112311
Insulator: A10064
Shielded
Handle: T10141
1843
Shielded
Shielded
Solder Lug &
Cable Clamp
Insulator: A11372
184L4
T2322
Number 170
1. 2-piece shielded handle with built-in cable clamp for .25" diameter cable.
Handles: Number T11231, handle; Number T11241, cap; see above for
insulating tube; Number T1125, rubber washer.
2. Other mating plugs are available.
3. Handle has .380" (9.65mm) diameter hole to accommodate
.375" diameter cable.
4. Handle has .451" (11.51mm) diameter hole to accommodate
larger diameter cables.
Number 184
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
148 SILENT-PLUG AND LUG® PLUG PHONE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
SILENT-PLUG PHONE PLUGS
2-CONDUCTOR PLUGS
Part
Number
Typical
Mating Jack
Handle Part
Number
No. 172
Terminals
Handle
Screw
Silent-Plug plugs have unique circuit-closing device—
stops hums, squeals and pops when plug is removed
from jack. One-piece tip rod assembly insures plug
quality. Utilizes cables up to .25" diameter (parallel or
shielded cable). U.S. Patent No. 2,664,475.
(Replacement
Screw Part No.
P-1011-3)
Two-Piece1 Ins.
Tube A-1006-3
172
Shielded
2 required
11
Two-piece1 Ins.
Tube A-1137-1
SPECIFICATIONS
Sleeve, Tip and Body: Nickel-plated copper alloy.
Terminals: Copper alloy, tin-plated.
Shielded2
181
182
Solder Lug and
Cable Clamp
T-1014-1 Handle,
A-1137-2 Ins. Tube
Screw: Cadmium plated (screws size 3-48).
Handles: Shielded machined copper alloy nickel-plated.
Tubular insulator inside handle.
1. 2-piece shielded handle with built-in cable clamp for .25" diameter
cable. Handles: Number T1123-1, handle; Number T1124-1, cap; Number
T-1125, rubber washer. 2. Mylar tube insulation for greater protection.
2-Conductor “Silent Plug”, No. 172
No. 181
No. 182
LUG®-PLUG PHONE PLUGS
2-CONDUCTOR PLUGS
Part
Number
Typical
Mating Jack1
Handle Part
Number
M-1002
Terminals
Handle
350
Black
2P-1216
Solder Lug
11
No. 380
Nos. 350, 351, 355
Handle: T-1060-1
380
Shielded
Insulator: A-1007-2
Similar to Littel-Plug phone plug. Same molded handles as
used on Littel-Plug; metal handle, bright nickel-plated, only
1" long. Fits all standard jacks. See drawing for details.
1 Switchcraft part numbers. See Jacks Section for additional mating jacks.
INSULATING
TUBE ON #380
SPECIFICATIONS
Sleeve, Tip and Body: Nickel-plated copper alloy.
Terminals: Solder lug: copper alloy, tin-plated.
Screw: plated steel.
Handles: Shielded: Nickel-plated copper alloy.
Molded: black or red plastic.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
"
AUDIO LOUDSPEAKER PLUGS AND HEAVY DUTY 1/4 PHONE PLUGS 149
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
AUDIO LOUDSPEAKER PLUGS
SERIES 187
Number 187BL (Typical)
The 187 series 1/4" phone plugs are similar to the
Switchcraft® 184 plugs, except that they offer an attractive
tapered handle with a snap-in flex relief. Other features include:
• Larger tip terminal to accommodate wire sizes up to 14 AWG.
• Choice of Satin nickel or black finish.
• Black flex relief bushing can be specified in three different
cable diameter openings for maximum reliability of cable.
• Plug is rated at 15A rms (maximum) for use with audio
loudspeaker applications.
Part Number
Cable
Relief
Bushing
Typical
Mating
Jack1
Nickel
Finish
187
Black
Finish
187B
SPECIFICATIONS
diameter (inch)
.3 to .33 (regular)
.3 to .355 (large) 11 or Z15J
.2 to .30 (small)
Sleeve, Tip and Body: Nickel-plated copper alloy.
Terminals: Solder lugs: tinned copper alloy;
Screw: tin-plated.
Handles: Die-cast zinc. Satin nickel or black finish.
Cable Relief Bushing: Black (thermoplastic elastomer).
187L
187D
187BL
187BD
1. Other mating plugs are available. See Jacks Section.
HEAVY DUTY 1/4" COMMERCIAL PHONE PLUGS
• Switchcraft’s 188 is more heavy-duty than
our competitor's biggest 1/4" commercial
phone plugs.
• Large curved tip solder terminal makes it
easier to solder to heavy gauge wires.
• Longer sleeve terminal allows more room
to make sleeve solder connections.
• Extra-large cable clamp securely grips
cable of up to .450" in diameter.
SERIES 188 Plug
• Will easily accommodate some varieties of
four conductor 14 gauge wire and parallel
two conductor 12 gauge wire.
• Bendable tab on sleeve terminal makes
termination easier by holding down cable
while soldering. In addition, such mechanical
retention makes for a superior solder
connection.
• Will handle up to 15 A. rms (maximum).
(continued on next page)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
"
150 HEAVY DUTY 1/4 COMMERCIAL PHONE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
HEAVY DUTY 1/4" COMMERCIAL PHONE PLUGS (continued)
SPECIFICATIONS
SERIES 299 PLUG
Contact Resistance (typical *D.O.M.J.):< 0.020 ohms.
Dielectric Withstand Voltage: 500 VAC (minimum).
Insulation Resistance @ 500 VDC: 2,000 megohms
(minimum).
Insulation Resistance (after MIL-STD-202 Salt Spray):
1,000 megohms (minimum).
Working Voltage: 250 VAC, 140 VDC.
Current Carry @ Working Voltage For 188 Plug
(typical *D.O.M.J.): 15.0 AMPS.
Current Carry @ Working Voltage For 299 Plug
(typical *D.O.M.J.): 6.0 AMPS.
Insert/Withdrawal Force: *D.O.M.J..
Soldering Requirement: ANSI/J-STD-001.
Temperature Range: -40° to + 85° Centigrade
U.L. Component Recognition File No.: E118169.
Life: *D.O.M.J.
Maximum Cable Size For 188 Plug:
12 AWG stranded, up to .450" diameter.
Maximum Cable Size For 299 Plug: .290" diameter.
Part
Number
Maximum
Cable Size
Mating
Jack
299
.290" Diameter
Z15J
MATERIALS
Tip: Nickel-plated copper alloy.
Sleeve: Nickel-plated copper alloy.
Handle: Nickel-plated copper alloy.
Tip Terminal: Copper alloy, electro tin-plated.
Cable Clamp: Copper alloy, electro tin-plated.
Insulators For 188 Plug: Thermojet plastic,
thermoplastic, thermoplastic film, P.P.O.
Insulators For 299 Plug: Thermoplastic,
thermoplastic film, glass epoxy.
*D.O.M.J. – Dependent On Mating Jack
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
"
"
1/4 AND .206 COMMERCIAL PHONE PLUGS 151
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" COMMERCIAL PHONE
PLUGS (continued)
.206" COMMERCIAL
PHONE PLUGS
3-CONDUCTOR/PLASTIC OR
SHIELDED HANDLES
PHONE PLUGS FOR
POLARIZED CONNECTIONS
.206" Diameter
Numbers S250, S255
Number 190
Number 60
FEATURES
For applications requiring polarization (use of plugs of different
sizes) to prevent insertion of incorrect equipment Littel-Plug®
phone plugs featuring a sleeve and tip diameter of .206" are
available. Mate with Number S128 Extension Jax® and S11
Littel Jax® jacks. Number S260 used interchangeable with
Military Type M642/51 (Switchcraft Number 480) plugs. Mate
with jacks S12B, S13B, M444, MT342B, MT344B and others.
Number 190A
Part
Number
Typical
Mating Jack2
Handle Part
Number
Terminals
Handle
◊60
◊90
190
Black
M1001
2-CONDUCTOR PLUGS PART NUMBERS
Shielded
T10451
Part
Number
Typical Mating
Jack1
Handle Part
Number
Solder Lug
12B
Handle: T10141
Shielded
Shielded
Handle
Terminals
Insulator: A10063
S250
Black
M1002
T10581
A10071
190A,190B
& 190BL
2-piece1
Solder Lug &
Cable Clamp
S11
S280
Shielded
1. 2-piece shielded handle with built-in cable clamp for .25" diameter cable.
Handles: Number T11231, handle; Number T11241, cap; Number
A10064, insulating tube; Number T1125, rubber washer.
2. Other Mating Plugs are available.
3-CONDUCTOR PLUGS PART NUMBERS
◊ Special order only. Contact Switchcraft.
Screw
(Replacement
Screw Part No.
P10292)
S260
S267
S12B
Black
M1002
2 required
Solder Lug &
Cable Clamp
1. Switchcraft® mating jacks.
Number 60
Number S260
Number 90
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
®
"
152 1/4 MITI-PLUG AUDIO PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" MITI-PLUG® AUDIO PLUGS
Number 174S
FEATURES
• 2-conductor phone plug with full shielding and resistance to
extremely rough usage for electrified audio instruments such
as amplifiers, synthesizers power heads and speaker systems
requiring high-quality audio plugs.
• 3-WAY CABLE STRAIN/STRESS RELIEF: For hours of
trouble-free operation under heavy and abusive use. Plug body
internally threaded for screw-on strain relief for cables from .29"
to .30" diameter, and an additional clamp for additional relief
(and for smaller cables). A heavy copper alloy-plated steel
spring at point of entry to plug keeps cable from folding and
pinching. Flex relief spring recommended for cables with
diameters of .265" maximum only.
• TERMINATING: Tip wire soldered to tip–braid folded back
and secured with cable clamp.
• IDENTIFICATION: Customer or OEM name of logo can be
applied to plastic handles for a minimal charge for personalization.
(Contact Switchcraft for details).
• SPECIAL HANDLE COLORS: Plastic handles molded in
custom colors on special order. Contact Switchcraft for details.
No. 174S
SPECIFICATIONS
Tip Rod & Body: Copper alloy.
Handle: Copper alloy or plastic (black).
Flex Relief Spring: Plated spring steel.
(Part No. P2848).
Strain Relief Clamp: Plated steel.
(Part No. P2380).
Insulation: Thermoplastic, glass reinforced.
No. 176S
2-CONDUCTOR PLUGS
Typical
Mating Jack1
Part
Number
Handle Part
Number
Handle
Flex Relief
U-Clamp
Spring
None
◊173
Black plastic
Copper Alloy
Copper Alloy
Black Plastic
Red Plastic
Black Plastic
Red Plastic
M1483
T2313
T2313
M1483
◊174S
◊175
◊176S
◊177S
◊178
Spring
Spring
None
11
M1483
◊179
None
1. Other mating plugs are available.
◊ Special order only. Contact Switchcraft.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
"
1/4 FLAT PLUG PHONE PLUGS 153
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
2- OR 3-CONDUCTOR/SHIELDED HANDLE
1/4" FLAT PLUG PHONE PLUGS
Part
Typical
Handle
No. Terminal Mating Jack1, 2 Conductor Handle Part No.
228
238
Solder
Lug
11
2
3
Shielded S3067
12B
1. Nickel plated steel handle. Two screws (Part Number P15823) required to
mount handle.
2. Other mating plugs are available.
Series 230
Series 220
3. Accommodates cables from .219" outside diameter to .250" outside
diameter Ideal for music equipment use.
3-CONDUCTOR/PLASTIC HANDLE
.206" DIAMETER SLEEVE AND TIP
Part
No.
Typical
Handle
Terminals
Screw3
Mating Jacks1
Handle
Part No.4
No. 238
Series S230
◊230
Black
M1005
M1005
M1005
◊235
◊237
◊239
Screw
Solder
Solder
Red
Black
Red
FEATURES
12B
• Ideal where conventional long handled plugs are not
suited to design of equipment. “Chassis-hugging” phone
plugs allow cables to be brought out at right angles to
equipment.
◊S230 Screw3
S12B2
Black
1. Switchcraft Part Number Other mating plugs are available.
• Removable plastic cap for easy assembly of wire leads
to either screw or solder lug terminals. Adapter clips on
types 220 and 225 make it convenient to clamp standard
phone tips to terminals.
• Terminals and body of plug mechanically interlocked,
eliminating probability of any shifting.
2. Part Number S230 is the commercial version of military Type PJ068
(Switchcraft Number 480) plug. Mates with S12B, S13B, M444, MT342B,
MT344B Jacks and others. Other mating plugs are available.
For applications where it is desirable to polarize, use plugs of different sizes
to prevent insertion of incorrect equipment. Sleeve and tip diameter of these
plugs is .206" Mates with S830, S1230 Extension-Jax® jacks and S12B,
S13B Littel-Jax® phone jacks.
3. Switchcraft Replacement Part Number P10292. 3 screws required.
4. Three screws (Number P1039) required to mount handle.
◊ Special order only. Contact Switchcraft.
• Cover is black or red plastic; plug body is a rugged
assembly of all metal parts.
• One-piece tip rod staked into tip terminal to insure
tightness, no disassembly of tip during use of plug.
• High grade insulation.
• Terminal identification permanently stamped into base
plate adjacent to each terminal. Letter “T” denotes tip
connection; “R” denotes ring sleeve; “S” terminal is the
sleeve or body connection (no identification on types
228, 238).
• Cover molds designed so customer’s name or trademark
inserts can be added. Call for details.
SPECIFICATIONS
Tip Rod and Sleeve: Nickel-plated copper alloy.
Terminals: Tinned copper alloy.
2-CONDUCTOR/PLASTIC HANDLE
Part
No.
Typical
Handle
Terminals
Mating Jack1
Handle
Part No.3
220
225
Screw
Screw
Black
Red
M1005
M1006
227
229
Solder Lug
Solder Lug
Black
M1005
M1006
–
11
Red
2P1509 Screw
Less Handle
1. Switchcraft Part Number; see jack section for additional mating jacks.
2. Switchcraft replacement Part Number P10292. 2 screws required per plug.
Clips for phone tips. Part Number S1832.
3. Three screws (Number P1039) required to mount handle.
Handle: Black or red plastic. Numbers 228 and 238,
steel,nickel-plated.
Series 220
Series 230
No. S-230
No. 238 (typical)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
154 RIGHT-ANGLE AUDIO PHONE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
RIGHT-ANGLE AUDIO PHONE PLUG
FEATURING 3-PIECE CONSTRUCTION
AND FAST TERMINATION/ASSEMBLY
Switchcraft's 2- or 3-conductor right-angle audio phone plugs
are designed for OEMs and users of commercial phone plugs.
The plugs offer large terminals for easy wiring, and only three
pieces to assemble - handle, insulator and finger/housing
assembly and rugged reliability for stable, long-term,
trouble-free operation.
FEATURES
226
• Easy Termination: Large terminals accept up to 16 AWG
wiring (cables up to .25 inch diameter)
• 3-Piece Assembly: Screw on the handle for quick and
easy assembly; minimizes labor costs.
• Rugged: All metal exterior construction.
• Low Profile: Only 1/2 inch wide. Ideal for crowded,
multi-channel panels. Right-angle handle minimizes
space required behind equipment.
• Knurled Handles: Positive grip during connect/disconnect.
• Rugged Cable Clamp: Isolates pulling and twisting strains.
Typical
Mating
Jack
Part
Number
Description
236
226
3-conductor 1/4" right-angle
commercial plug.
12B, 13B
112B, 113B
SPECIFICATIONS
Tip, Rod and Handle: Nickel-plated copper alloy.
2-conductor 1/4" right-angle
commercial plug
11, 12A
111, 112A
Housing/Sleeve: Nickel-plated.
Tip Terminal: Tin-plated copper alloy.
Sleeve (Clamp) Terminal: Tin-plated steel.
Insulation: Thermoplastic.
Dielectric Withstanding Voltage: 500 Vac.
Insulation Resistance: 50,000 Megaohms minimum (initial).
Operating Temperature: -20°C to +65°C.
No. 236
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
"
1/4 LOCK-EXTENSION JACKS AND PLUGS 155
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
1/4" LOCK-EXTENSION JACKS AND PLUGS
Number 133
Number 298
FEATURES
SPECIFICATIONS
Lock-Plug Tip Rod, Body, Handle and Coupling Ring:
Nickel-plated copper alloy.
Terminals: Brass, electro-tinned. Solder lug design,
cable clamp part of sleeve terminal.
Insulation: Rigid plastic.
Modified Littel-Plug® phone plug, 2- or 3-conductor, with
coupling ring that can be threaded to thread projection of
mating panel jack or to threaded end of the Lock-Extension
Jax®. Locks connection after plug has been fully inserted
into its mating panel jack or Extension Jax®.
LOCK-EXTENSION JAX®
Housing (or Sleeve) and Handle:
Nickel-plated copper alloy.
Lock-Plug® makes proper contact to mating jack without
tightening or attaching coupling ring, when rapid disconnect
may be desired. Lock-Plug fits any standard jack with 3/8".-32
thread bushing with .094" of the bushing exposed. Lock-
Extension Jax also will mate properly with standard phone
plugs, where no “lock” requirement exists.
TERMINALS:
Sleeve: Plated steel. Tip and Ring:
integral part of tip and ring springs.
Springs: Spring tempered copper alloy.
Insulation: Molded thermoplastic insert.
Rigid plastic terminal washer.
LOCK-PLUG
Typical
Part
Mating
Handle
Number
282
Cond.
2
Terminals
Jack
12A
Part Number
Notes
Solder
Lug &
Cable
Clamp
T10581
A10071
Similar to Switchcraft Number 297 Littel-Plug
except with coupling ring.
298
3
12B, 133
LOCK-EXTENSION JAX®
Typical
Mating
Plug
Part
Handle
Number
Cond.
Terminals
Part Number
Notes
Solder
Lug &
Cable
Clamp
Sleeve terminal has cable clamp. Similar to
®
133
3
298
T1485
Switchcraft Number 131 Extension-Jax®.
133
282
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
156 3.5MM HEAVY DUTY STEREO PLUG
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
3.5 MM HEAVY DUTY STEREO PLUGS
RIGHT ANGLE
35HDBAU
3.5MM STEREO PLUGS
SPECIFICATIONS
Contact Resistance: <0.020 ohms
FEATURES
Dielectric Withstand Voltage: - 250 VAC (min.)
Insulation Resistance @ 500 VDC: 2,000 megohms (min.)
Working Voltage: - 250 VAC, 140 VDC
Current Carry @ Working Voltage: 4 AMPS
Insert/Withdrawal Force: - Typical 2.5/2 pounds
Temperature Range: 0° to 66° Centigrade (operating)
Passed MIL-STD-202F Method 107G (Thermal Shock), and
Method 201 (Vibration)
• Heavy duty 3.5mm plugs for audio, instrument,
other applications.
• Large cable clamps for rugged use.
• Available in straight or right angle.
• One piece tip rods for added durability.
• Available in nickel, gold, and black finishes.
• Large solder terminals for easy assembly.
• Standard handle accommodates cable sizes up to 0.290"
Optional ‘S’ versions accommodate cable sizes up to 0.175"
35HDBN - Black Handle, Nickel Plug
35HDBAU - Black Handle, Gold Plug
35HDNAU - Nickel Handle, Gold Plug
35HDNN - Nickel Handle, Nickel Plug
Life: - 5000 cycles
Maximum Cable Size: - .250? dia.
MATERIALS
Tip Rod: Copper alloy, tin, or gold-plated
Ring: Copper alloy, nickel, or gold-plated
Sleeve: - Copper alloy, nickel, or gold-plated
Handle: Copper alloy, nickel, or gold-plated
Cable Clamp: - C.R.S., tin-plated
Solder Terminal: Copper alloy, tin-plated
Tubular Insulator: Clear plastic
BENEFITS
• One piece tip rod with flat for easy solderability.
• Compliments current line of 3.5 mm jacks.
• Insert molded plug finger.
• Heavy Duty cable clamp provides better strain relief
for larger cables
• Longer cable clamp for easier plug assembly and more
room for solder connections
• Knurl on the back of handle provides ergonomic gripping
surface to tighten plug
ORDERING INFORMATION
1. Order by part number
2. Contact Switchcraft for more information
• Tubular insulator included to prevent solder joints
from contacting handle
• Longer handle for improved gripping surface
and easy plug withdrawal from jack
Part
Number
35HDNN
35HDNNS
35HDBN
35HDBNS
35HDNAU
35HDNAUS
35HDBAU
35HDBAUS
35HDRANN
Description
Plug Finger Handle Notes
Nickel
Nickel
Nickel
Nickel
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Black
Black
Nickel
Nickel
Black
Black
Nickel
Black
Nickel
0.175" handle opening
0.175" handle opening
0.175" handle opening
• Large solder terminal for easy solderability
MARKETS
• Audio
• Consumer electronic equipment
• Broadcast studios
• Home recording equipment
• Audio cable assembly manufacturers
• Instrumentation
0.175" handle opening
Right angle
Right angle
35HDRABAU Gold
35HDRAAU
Gold
Right angle
• Test equipment
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
"
.141 MINIATURE PHONE PLUGS 157
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
FEATURES
.141" MINIATURE PHONE PLUGS
• Miniature 2-conductor Phone Plug for use with Switchcraft
Tini-Jax® miniature phone jacks. About 1/2 the size of
Switchcraft Littel-Plug® phone plug. Average net weight,
1/8 ounce.
• Various terminal combinations: (a) Dual purpose sleeve
terminal may be clamped over metal braid or shielded
cables; provides cable anchor. Easily soldered for perfect
electrical connection. (b) Screw terminal design (no cable
clamp) for cable. Terminals that can be more suitably
connected by screws.
• 1-piece tip rod staked into mating terminals; no disassembly
of tip during use of plug. Terminals and body of plug
interlocked mechanically.
• Available in black or red plastic handles or brass nickel-
plated handles for shielding. Can be used with cables up
to .188" outside diameter.
Number 750
SPECIFICATIONS
Sleeve, Tip and Body: Nickel-plated copper alloy.
Terminals: Copper alloy, electro-tinned. Solder lug or
screw type (Screws #0-80).
Handle: Molded black or red plastic.
Copper alloy, nickel-plated.
Part
Number
740
745
750
755
2P1384
770
780
Typical
Terminals
Mating Jack1 Handle
Part No.
M1055
M1056
M1055
M1056
–
Black
Red
Screw2
Black
Solder Lug &
Cable Clamp
41
Red
Less Handle
Shielded
Shielded
Screw2
T13631
T13631
Solder Lug &
Cable Clamp
Number 780
No. 740
No. 750
1. Other mating plugs are available.
2. Switchcraft replacement Part Number P1153. 2 screws required per plug.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
"
158 .097 SUBMINIATURE PHONE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
.097" SUBMINIATURE PHONE PLUGS
Numbers 850, 880
Number 851
FEATURES
MICRO-PLUG
Part
• Subminiature, 2-conductor phone plugs are 1/3 the size
of standard phone plugs, with the uniformity,
dependability, and quality construction of Switchcraft
Littel-Plug® and Tini Plug® phone plugs. 50 W soldering
with 60/40 solder recommended for terminating.
Mating
Jacks1
Handle
Part No.
Number
Terminals
Handle
Black
850
852
T18623
T18623
T18622
T18622
T18621
T18621
–
Black
855
857
Red
• Switchcraft’s 852, 853, 857, 858, 882 and 883 have a
wider insulator between the tip and the sleeve. The wide
insulator prevents the tip of the plug from shorting out
between the tip spring and the sleeve of the jack
during insertion.
Solder Lug
TR2A
Red
880
882
2P1419
Natural
Natural
Less Handle
Micro-Plug® PLUG - Sleeve terminal incorporates cable
clamp. May be clamped over mated braid to anchor
shielded cable; solders readily for perfect electrical
connection. Terminals and plug body interlocked
mechanically. Accommodates cable up to .125"
Combined length, handle and tip: 1.106" outside diameter,
.250" outside diameter handle.
LOCK Micro-Plug® PLUG - Similar to Micro-Plug plug,
with addition of integral threaded collar that fastens to
bushing of mating jack to prevent accidental disconnect.
Requires at least .05" of exposed and usable thread on
jack bushing to lock securely. Ideal for secure connections
in critical medical and sensitive scientific instruments.
Combined length, handle and tip: 1.046". Various molded
cable assemblies incorporating Micro-Plug Subminiature
phone plugs with plastic handles are available.
LOCK MICRO-PLUG
Part
Mating
Jacks1
Handle
Part No.
Number
Terminals
Handle
Black
851
853
T23123
T23123
T23122
T23122
T23121
T23121
Black
856
858
Red
Solder Lug
TR2A
Red
881
883
Natural
Natural
1. Switchcraft Part Numbers. Other mating plugs are available.
SPECIFICATIONS
MATERIALS
Tip, Rod and Body (also integral Coupling Collar on
Lock Micro-Plug): Nickel-plated copper alloy.
Insulation: Molded thermoplastic.
Sleeve Termination and Cable Clamp:
Tinned copper alloy.
Handle: Anodized aluminum; red, black or natural finish.
No. 850 (typical)
No. 851 (typical)
MECHANICAL
Life rating: 5,000 insertion/withdrawals.
Insertion/Withdrawal Force: 1 pound (depending on
mating jack).
ELECTRICAL
Insulation Resistance: > 100 megohms
Dielectric Withstanding Voltage: 250V AC.
ENVIRONMENTAL
Thermal Range: -55°C to +85°C (non-operating);
-20°C to 65°C (operating).
Thermal Shock: Mil-Std 202, Method 107.
Humidity: Mil-Std 202, Method 106.
Salt Spray: Mil-Std 202, Method 101.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
AUDIO ADAPTERS 159
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
Part Number 332A (Not shown): 2-cond. phone jack input
to old MC1M-style microphone connector output. Coupling
ring can be screwed back to convert female microphone
connector to male type. Shielded.
AUDIO ADAPTERS
Part Number 336A: 2-conductor phone jack input to a
phono plug output. Shielded.
336B
Part Number 336B: 2-conductor phone jack input to phono
jack output. Shielded.
336A
Part Number 340: Two 2-conductor phone jack inputs
connected in parallel to a 2-conductor phone plug output.
Shielded.
Part Number 345A: Phono plug input to a standard
2-conductor phone plug output. Shielded.
Part Number 349A: Phono plug coupler. Phono Extension
340
Jax® input to phono Extension Jax output. Shielded.
◊Part Number 352A: Stereo to monaural adapter.
3-conductor phone jack input to 2-conductor phone plug
output. Extra-wide insulator prevents accidental damage
should wrong connection be made. Shielded.
349A
Part Number 361A: Phone plug coupler. Standard 1/4"
inside diameter phone jack input to standard 1/4" inside
diameter phone jack output. Ideal for connecting two
cables terminated with 2-conductor phone plugs. Shielded.
345A
Part Number 362A (Not shown): Phone plug coupler.
Standard 3-cond. phone jack input to standard 3-cond.
phone jack output. Ideal for connecting two cables terminated
with 3-conductor phone jacks. Shielded.
361A
352A
Part Number 363: Phone jack coupler. Standard 1/4"
2-conductor phone plugs at each end to connect two
cables terminated with phone Extension Jax. Shielded.
Part Number 364A: EIA Standard 2-conductor Tini-Jax®
phone jack input to a standard 1/4" 2-conductor phone
plug output. Shielded.
Part Number 365: EIA Standard 2-conductor Tini-Jax®
phone jack input to a phono plug output. Shielded.
Part Number 370A: 2-conductor EIA Standard Tini-Plug®
phone plug (.141" diameter finger) output to phono jack
input. Adapts standard phono plug to small Tini-Plug.
Shielded.
364A
370A
363
Part Number 374: 2-conductor phone jack input to a
2-conductor EIA Standard Tini-Plug (.141" diameter finger)
phone plug output. Adapts standard phone plug to small
Tini-Plug.
365
Part Number 376: EIA Standard Tini-Jax phone jack input
to a 2-conductor Micro-Plug (.097" diameter finger) phone
plug output. Adapts a Tini-Plug phone plug to a Micro-Plug
phone plug.
Part Number 377: Micro-Jax phone jack input to a
2-conductor EIA Standard Tini-Plug (.141" diameter
finger) phone plug output. Adapts a Micro-Plug phone plug
to a Tini-Plug phone plug.
376
374
377
◊ Special order only. Contact Switchcraft.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
160 PHONO PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
PHONO PLUGS
3502RABAU
35581
35585
3502A
3501M
3501MC
3502AAU
3502RAAU
3502
35582
3507
3502ABAU
3504M
3502RA
FEATURES
• Wide variety of styles for a wide range of applications.
• 3502A and 3502RA Series offer solid pin, large solder cups.
• 3558 Series utilize plastic handles for low cost applications.
• 3507 and 3504M have low-loss nylon insulators for
RF applications. Can be used at 1 kW at 30 MHz.
• 3501M and 3501MC have the handle removed for tight spaces
• Options include nickel and gold plated, or black epoxy finishes.
SPECIFICATIONS
MATERIALS
Pin: Nickel or gold plated, copper alloy
Sleeve: Nickel or gold plated, copper alloy
Handle: Nickel or gold plated, or black epoxy finish, copper alloy
(3558 Series: Thermoplastic)
Cable Clamp: Tin, copper alloy
Insulator: Rigid Plastic
ELECTRICAL
Current Carry @ Working Voltage (typical *D.O.M.J.): 6A
Contact Resistance (typical *D.O.M.J.): < 0.20 Ohms
Dielectric Withstanding Voltage: 500 VAC min.
Insulation Resistance @ 500VDC: 2,000 megohms min
Working Voltage: 250VAC, 140VDC
MECHANICAL
Life: *D.M.O.J
Temperature Range: -40∞ C to +85∞ C
*D.M.O.J. –Dependent On Mating Jack
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACKS AND PLUGS
PHONO PLUGS
161
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PHONO PLUGS (continued)
3501M & 3504M
35581, 33582, 33585
3501MC
3502
3502A
3507
3502RA
Part
Number
3502A
3502AAU
3502ABAU
3502RA
3502RABAU
3502RAAU
35581
35582
35585
3502
3501M
3501MC
3504M
3507
330F1
330F2
Description
Pin
Nickel
Gold
Gold
Nickel
Gold
Typical
Handle
Nickel
Nickel
Black
Notes
Mating Jack
BP Series
BP Series
BP Series
BP Series
BP Series
BP Series
BP Series
BP Series
BP Series
BP Series
BP Series
BP Series
3505F
Nickel
Black
Right angle
Right angle
Right angle
Red handle
Black handle
White handle
Gold
Nickel
Plastic
Plastic
Plastic
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Same as 3501M except with cable clamp
Same as 3507 less cable clamp and handle
For RF applications
2 inline jacks to 1 male plug, 4" gray shielded cable
1 inline jack, 1 male plug to 1 male plug, 4" gray shielded cable
Nickel
3505F
BP Series
BP Series
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACKS AND PLUGS
162 MINIATURE POWER PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MINIATURE POWER PLUGS
760
860
760K
S760K
761K
FEATURES AND BENEFITS
• 2-conductor power jacks.
• Hollow center pin available in 3 pin diameters and 2 finger lengths
(See chart below).
• Locking option available for added security in critical applications.
• Molded plastic handles available in black or red.
• Sleeve terminal serves as cord clamp.
INSIDE DIAMETER TOLERANCES (PLUGS)
.050" (.050 - .053)
1.27mm (1.27 - 1.35)
.080" (.080 - .084)
2mm (2.03 - 2.13)
.100" (.099 - .103)
2.5mm (2.52 - 2.61)
860/865:
SPECIFICATIONS
Plug Sleeve and Pin: Nickel-plated copper alloy.
Lockring: Nickel-plated copper alloy.
Lockring Thread Size: 5/16 - 32 UNEF 2B.
Finger Insulator: Molded plastic.
Insulating Washers: Rigid plastic.
Sleeve Terminal: Copper alloy, electro-tinned.
Handle: Molded plastic.
S760/S765*:
760/765*:
OUTSIDE DIAMETER TOLERANCES (PLUGS)
.150" (.149 - .153)
860/865:
Handle Thread Size: 5/16 - 24 UNF 2B.
Electrical: Current (Carry): 5 amps.
3.81mm (3.78 - 3.89)
.218" (.217 - .221)
S760/S765*:
5.5mm (5.51 - 5.61)
ORDERING INFORMATION
1. Order by part number. 2. Contact Switchcraft for more information.
3. ◊ Indicates “special order” only.
.218" (.217 - .221)
760/765*:
5.5mm (5.51 - 5.61)
*includes locking (k) versions
PART NUMBERING and MATING CHART (Power plugs/Power jacks)
Inside
Outside Length Length Locking
Number Diameter Diameter
Tip
Handle
Color
Handle
Part Number
Switchcraft®
Mating Jack1
Part
“L1”
.375"
.375"
.375"
.475"
.375"
.475"
.375"
.375"
.375"
.375"
.475"
.375"
.475"
.375"
.375"
.375"
“L2” Feature
Insulator
1.42
1.42
1.7
No
No
M1055
M1056
M1055
M1055
M1056
M1056
No Handle
M1055
M1056
M1055
M1055
M1056
M1056
No Handle
M1055
M1056
760
765
.100"
.100"
.100"
.100"
.100"
.100"
.100"
.080"
.080"
.080"
.080"
.080"
.080"
.080"
.050"
.050"
.218"
.218"
.218"
.218"
.218"
.218"
.218"
.218"
.218"
.218"
.218"
.218"
.218"
.218"
.150"
.150"
Black
Black
Black
Black
Black
Black
Black
White
White
Black
Black
Black
Black
White
Black
Black
Black
Red
712A, RAPC712, RASH712, RASM712, PC712A, RA712A
712A, RAPC712, RASH712, RASM712, PC712A, RA712A
712A, PC712A
Yes
Yes
Yes
Yes
No
Black
Black
Red
760K
761K
1.8
L712A, PCL712A
765K
1.7
712A, PC712A
1.8
Red
766K
L712A, PCL712A
1.42
1.42
1.42
1.7
No Handle
Black
Red
◊2P1515
S760
712A, PC712A
No
722A, RAPC722, RASH722, RASM722, PC722A, RA722A
722A, RAPC722, RASH722, RASM722, PC722A, RA722A
722A, PC722A
S765
No
Yes
Yes
Yes
Yes
No
Black
Black
Red
S760K
S761K
S765K
S766K
2P1624
860
1.8
L722A, PCL722A
1.7
722A, PC722A
1.8
Red
L722A, PCL722A
1.42
1.42
1.42
No Handle
Black
Red
722A, PC722A
No
RAPC 732, RASH 732, RASM 732
RAPC 732, RASH 732, RASM 732
865
No
1See pages 130-134.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
PROFESSIONAL PUNCHDOWN TERMINAL
163
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PROFESSIONAL PUNCHDOWN TERMINAL (PPT)
Our Patchbays Now Feature the New Professional
Punchdown Terminal (PPT) Our Patchbays Have Just
Rounded A New Corner
Actually, the corners we rounded belong to our patchbays’
revolutionary, new Professional Punchdown Terminal (PPT),
making it perfectly compatible with the industry standard. We
realized that achieving a new industry standard meant we
couldn’t cut any corners to get there.
The PPT design incorporates a split-barrel design and a more
rugged, thicker housing to minimize the impact of repeated
punchdowns. The split-barrel design eliminates the problems
associated with the old “V-shaped” terminal designs. The PPT
design distributes pressure evenly across both sides of the
terminated wire, causing improved wire retention plus more
reliable connections. The serrated teeth in the plastic housing
firmly grip the wires, which also greatly improves wire
retention. With the PPT, multiple wires can be terminated to a
single contact, and a wide range of wire gauges can be used.
Look for Switchcraft’s PPT in our MTP and TTP Series of
audio patchbays, and in our new Backpanel Series.
All Switchcraft audio patchbays incorporate heavy gauge
materials and our high quality nickel-plated, steel framed
jacks. Gold-plated, crossbar contacts come standard!
MATERIALS
Housing: Thermoplastic (UL 94V-0)
Contacts: High strength copper alloy, tin plated
Wire size: Accommodates #22, 24, or 26 AWG,
stranded or solid
Accessories
Part Number
Description
K459
PPT replacement kit consists of
15 of each color* (IDC/IDC)
K460
PPT replacement kit consists of
15 of each color (IDC/wirewrap)
PT1LA
PT2B
PPT impact punchdown tool
Replacement bit for PT1LA tool
*Colors consist of red, black, white, yellow, blue, and orange.
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
164 FRONT ACCESS MTPFA/TTPFA SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
FRONT ACCESS MTPFA/TTPFA SERIES
TTPFA96K1NS
The Front Access Series offers the end user the ease of
re-terminating patchpoints from the front of the rack as
opposed to the back. A slide out tray allows the user to slide
out the punchdown terminals, and reconfigure the unit. An
easy release mechanism on either side of the unit allows it to
be pushed back into place and easy to grip locking nuts tighten
the unit in place.
SPECIFICATIONS
MATERIALS (JACKS)
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel silver with welded contacts
Assembly Screws: Nickel-plated steel
Welded Contacts: Gold alloy
PANEL
FEATURES AND BENEFITS
Frame: C.R.S. black epoxy painted
Designation Strips: Black polycarbonate 94V-0
Designation Strip Covers: Clear polycarbonate
Jack Inserts: Thermoplastic 94V-0
• Easy slide-out tray slides forward for
easy re-termination from the front of the rack
• Available with either 48 MT style or 96 TT style
jacks in a 1RU space
• Attractive, corrosion resistant nickel-plated,
steel frame jacks
• Gold-plated switching contacts reduce
contact resistance, improves reliability
• Extra wide designation strips for easy channel
identification
MECHANICAL
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: -20°C to +65°C
ELECTRICAL
Jack Contact Resistance: 30 milliohms
• Rugged, attractive black epoxy-finished
steel chassis
• Configurations available include normals
strapped and normals brought out
initial maximum; 50 milliohms after life
Jack Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500V at 60 Hz AC
Working Voltage: 100 milliamps or less; maximum 56.5 VDC
Ordering Information
Part
Type of No. of
Number
Jack Jacks Description
TTPFA96K1NS TT
TTPFA96K1NO TT
MTPFA48K1NS MT
MTPFA48K1NO MT
96 1.75" High, normals strapped
96 1.75" High, normals brought out
48 1.75" High, normals strapped
48 1.75" High, normals brought out
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
FRONT ACCESS MTPFA/TTPFA SERIES 165
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
FRONT ACCESS MTPFA/TTPFA SERIES (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
166
MTP48K WIRED AUDIO SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MTP48K WIRED AUDIO SERIES
The MTP Series were developed with the AES/EBU digital
standard in mind. All versions are made with 110 Ohm cabling
inside as a standard. Available in a wide variety of configurations.
MTP48K3NO
FEATURES AND BENEFITS
• Unit features 48 MT style jacks in either
1RU (1.75"H) or 2RU (3.5"H) spaces
• All versions utilize AES/EBU wiring for
complete digital compatibility
MECHANICAL
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: O°C to +50°C
• Attractive, corrosion resistant nickel-plated,
steel frame jacks
• Gold-plated switching contacts reduce
contact resistance, improve reliability
• Rugged, attractive black epoxy-finished
steel chassis
ELECTRICAL
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500 VAC at 60 Hz
Working Voltage: 140 VDC maximum
Current Rating: 100 milliamps
• Extra wide designation strips for easy
channel identification
• 1RU version configurations include normals
strapped and normals brought out
• 2RU version configurations include normals
strapped, normals brought out, and sleeve
normals brought out
SPECIFICATIONS
MATERIALS
JACKS
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel silver
with welded contacts
Assembly Screws: Zinc-plated steel
Welded Contacts: Gold alloy
Ordering Information
Part
Type of No. of
Number
Jack
Jacks Description
MTP48K1NS
MTP48K3NS
MTP48K1NO
MTP48K3NO
MT
MT
MT
MT
48
48
48
48
48
1.75" High, normals strapped
3.5" High, normals strapped
1.75" High, normals brought out
3.5" High, normals brought out
3.5" High, sleeve normals out
PANEL
Front Channel: Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black polycarbonate 94V-0
Designation Strip Covers: Clear polycarbonate
Jack Inserts: Thermoplastic polyester
MTP48K3SNO MT
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
MTP48K WIRED AUDIO SERIES 167
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MTP48K WIRED AUDIO SERIES (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
168 TTP96K WIRED AUDIO SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TTP96K WIRED AUDIO SERIES
TT96K3NS
The TTP96K Series was developed with the AES/EBU
digital standard in mind. As a standard the TTP96K utilizes
110 Ohm cabling inside.
FEATURES AND BENEFITS
MECHANICAL
• Unit features 96 TT style jacks in 2RU
(3.5"H) space
• Utilizes AES/EBU wiring for complete
digital compatibility
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: O°C to +50°C
• Attractive, corrosion resistant nickel-plated,
steel frame jacks
• Gold-plated switching contacts reduce
contact resistance, improve reliability
• Rugged, attractive black epoxy-finished
steel chassis
ELECTRICAL
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500 VAC at 60 Hz
Working Voltage: 140 VDC maximum
Current Rating: 100 milliamps
• Extra wide designation strips for easy
channel identification
SPECIFICATIONS
MATERIALS
JACKS
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel silver with
welded contacts
Assembly Screws: Zinc-plated steel
Welded Contacts: Gold alloy
PANEL
Front Channel: Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black polycarbonate 94V-0
Designation Strip Covers: Clear polycarbonate
Jack Inserts: Thermoplastic polyester
Ordering Information
Part
Number
Type of No. of
Jack Jacks
Description
TTP96K3NS
TT
96
3.5" High, normals strapped
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
TTP96K WIRED AUDIO SERIES
169
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TTP96K WIRED AUDIO SERIES (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
170 MTPH/TTPH HARNESS AUDIO SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MTPH/TTPH HARNESS AUDIO SERIES
The MTPH and TTPH Harness Series utilize
standard front panel assemblies, a 4 foot cable
harness, and our standard back panel assemblies.
Available in a wide variety of configurations, all
are terminated to our PPT’s on the back panel.
Primarily used where the back panels must either
be mounted into a rack, or brought back to the
front for easier access. Custom cable lengths can
also be supplied. Contact the factory for details.
MTPH48K3NO
FEATURES AND BENEFITS
PANEL
Front Channel: Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black polycarbonate 94V-0
Designation Strip Covers: Clear polycarbonate
Jack Inserts: Thermoplastic polyester
• Units feature either 48 MT style jacks or 96 TT style jacks on
the front panels, to a 4 foot harness, out to a backpanel with
PPT’s
• All versions utilize AES/EBU wiring for complete digital compati-
bility
• Attractive, corrosion resistant nickel-plated, steel frame jacks
• Gold-plated switching contacts reduce contact resistance,
improve reliability
• Rugged, attractive black epoxy-finished steel frame chassis
• Extra wide designation strips for easy channel identification
MECHANICAL
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: O°C to +50°C
SPECIFICATIONS
MATERIALS
ELECTRICAL
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500 VAC at 60 Hz
Working Voltage: 140 VDC maximum
Current Rating: 100 milliamps
JACKS
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel silver with
welded contacts
Assembly Screws: Zinc-plated steel
Welded Contacts: Gold alloy
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
MTPH/TTPH HARNESS AUDIO SERIES
171
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MTPH/TTPH HARNESS AUDIO SERIES (continued)
Ordering Information
Part Number
Type of Jack
No. of Jacks
Description
MTPH48K1NS
MT
48
1.75" High front panel, 4' Harness,
3.5" High back panel, normals strapped
1.75" High front panel, 4' Harness,
3.5" High back panel, normals brought out
3.5" High front panel, 4' Harness,
3.5" High back panel, normals strapped
3.5" High front panel, 4' Harness,
3.5" High back panel, normals brought out
3.5" High front panel, 4' Harness,
3.5" High back panel, sleeve normals brought out
1.75" High front panel, 4' Harness,
3.5" High back panel, normals strapped
1.75" High front panel, 4' Harness,
5.25" High back panel, normals brought out
3.5" High front panel, 4' Harness,
MTPH48K1NO
MTPH48K3NS
MTPH48K3NO
MTPH48K3SNO
TTPH96K1NS
TTPH96K1NO
TTPH96K3NS
TTPH96K3NO
MT
MT
MT
MT
TT
TT
TT
TT
48
48
48
48
96
96
96
96
3.5" High back panel, normals strapped
3.5" High front panel, 4' Harness,
5.25" High back panel, normals brought out
See Page 172 for Mechanical Drawings
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
172
MTPH/TTPH HARNESS AUDIO SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MTPH/TTPH HARNESS AUDIO SERIES (continued)
TTPH96K1 SERIES
FRONT VIEW
TTPH96K3 SERIES
FRONT VIEW
MTPH48K1 SERIES
FRONT VIEW
MTPH48K3 SERIES
FRONT VIEW
TOP ROW
TOP ROW
TOP ROW
BOTTOM ROW
BOTTOM ROW
BOTTOM ROW
NORMALS AT JACKS
NORMALS OUT
FULL SLEEVE NORMALS OUT
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
MTPH/TTPH HARNESS AUDIO SERIES 173
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MTPH/TTPH HARNESS AUDIO SERIES (continued)
MTPH48K1NS & MTPH48K3NS
REAR VIEW
MTPH48K1NO & MTPHK3NO
REAR VIEW
MTPH48K1SNO & MTPH48K3SNO
REAR VIEW
TTPH96K1NS & TTPH96K3NS SERIES
REAR VIEW
TTPH96K1NO & TTPH96K3NO SERIES
REAR VIEW
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
174 MTPBP/TTPBP BACKPANEL SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MTPBP/TTPBP BACKPANEL SERIES
MTPH48K3BPNS
The Backpanel Series offers the end user the flexibility of configuring
their own patchbay, or to use as a central patchpoint location.
The backpanels utilize the PPT punchdown and come with
a rugged cable tray.
FEATURES AND BENEFITS
• Allows for custom patchbay configurations
or central patching points
• PPTs have IDCs on both sides for easy
installation
MATERIALS
Housing: Thermoplastic (UL 94V-0)
Contacts: High strength copper alloy
Backpanels: Black Epoxy coated C.R.S.
Cable Tray: Black Epoxy coated C.R.S.
• Rugged, attractive black epoxy-finished
steel chassis
• Cable trays allow for mounting and
securing terminated cable
Ordering Information
SPECIFICATIONS
Part
Sets of
Panel thickness: .093"
Number
PPT Terminals
Height
3.5"
3.5"
3.5"
7.0"
Description
T, R, S
T, R, S, TN, RN
T, R, S, TN, RN
+, -, S
Mounting hole diameter: .187"
Mounting hole spacing (48 IDCs/row):
.340" (Horizontal) x .275" (Vertical)
Mounting hole spacing (52 IDCs/row):
.320" (Horizontal) x .275" (Vertical)
Wire size: #22, 24, 26 AWG Stranded
or Solid (IDC termination)
MTP48K3BPNS
MTP48K3PBNO
MTP52K3BPNO
MTP24K7
TTP96K3BPNS
TTP96K5BPNS
48
48
52
24 x 2
96
96 x 2
3.5"
5.25"
T, R, S
T, R, S, TN, RN
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
MTPBP/TTPBP BACKPANEL SERIES 175
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MTPBP/TTPBP BACKPANEL SERIES (continued)
NOT ALL IDC CONNECTORS SHOWN
FIGURE A
(MTP48K3BPNN SHOWN)
NOT ALL IDC CONNECTORS SHOWN
FIGURE B
(TTP96K5BPNO SHOWN)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
176 EZ NORM PATCHBAY SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
EZ NORM PATCHBAY SERIES
Center Strip Removes For
Normalling Access
Easily Normal The
Jacks By Rotating To
“Full”, “Non”, Or “Half”
Positions
The EZ Norm offers a simplified method for setting up and
ELECTRICAL:
changing normals to a Bantam/TT patchbay. Simply remove
the middle designation strip, and rotate the center cam, using
a standard screwdriver. An audible”click” can be heard as
you rotate from full normals to no normals to half normals.
An opaque marking strip is included to conceal the normal
position, if needed.
Jack Spring Contact Resistance: 30 milliohm Maximum
Cam Switch Contact Resistance: 30 milliohm Maximum
Insulation Resistance: 10,000 Megaohms
Dielectric Withstanding Voltage:
500 VAC (rms) at 60 Hz
Insertion Loss: -0.5dB up to 10 MHz
EZ NORM JACK SPECIFICATIONS
MATERIALS:
Housing & Cover: 94V-0 rated thermoplastic
Sleeve Collar: Nickel plated copper alloy
Tip, Ring, Shunt, & Sleeve Springs: Nickel Silver with
welded contacts
Welded Contacts: Gold
Cam Switching Springs: Silver plated copper alloy
Cam Switching Contacts: Silver plated copper alloy
EZ NORM PATCHBAY OPTIONS
• 1RU can be terminated to EDAC or Cannon DL,
solder terminals, or wire-wrap terminals
• 1.5RU can be terminated to EDAC/Cannon DL, solder
terminals, wire-wrap terminals, plus 3 pin connectors,
or our own PPT Professional Punchdown Terminal
• 2RU Same as above
• All units will be offered with or w/o docking connector
• Unwired units will be offered with either cable tie bar
or cable tray
MECHANICAL
Jack Mechanical Life: 30,000 cycles
Cam Contact Mechanical Life: 30,000 cycles
Insertion - Withdrawal Forces: 1 - 4 lbs.
Moisture resistance: MIL-STD 202 Method 106
Thermal shock: MIL-STD 202 Method 107
Salt spray: MIL-STD Method 101 (48 hrs.)
Vibration: MIL-STD 202 Method 213
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
EZ NORM PATCHBAY SERIES 177
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EZ NORM PATCHBAY SERIES (continued)
Racks
The EZ Norm comes in 3 different rack heights, 1RU, 1.5RU, and 2 RU.
Harness Assembly
The EZ Norm is also offered as a
harness assembly, with a standard
harness of 4 ft. Custom lengths are
available, call Switchcraft® for details.
TT EZN
_
H
10
15
20
_
P
_
D
E90
E56 3PIN CDL
E38 WW FA
IDC
SL
_
T
B
Front Access
The Front Access option offers a
slide-out tray, allowing the end
user to re-terminate the patchbay
from the front of the rack.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
178 TT96 EDAC SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT96 EDAC SERIES
TT96EDACNS
The TT96EDAC Series offers the convenience of EDAC® connectors on
the back of the panel for easy installation. Available in normals strapped
and normals brought out, both wired to the SAC code of wiring. We also
offer custom wiring configurations. Contact the factory for details.
FEATURES AND BENEFITS
• Attractive, corrosion-resistant, nickel-plated jacks
• Steel frame jacks for superior jack life
• Extra wide labeling strips provide maximum space
and two vertical strips, one at each side
• Rugged, attractive black anodized
aluminum face will not break
EDAC CONNECTOR
Housing: Thermoplastic, UL94V-0
Contacts: Gold plated phosphor bronze
MECHANICAL
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: -20°C to +65°C
• Two configurations available:
- Normals brought out
- Normalled at jacks
ELECTRICAL
• Gold switching contacts for long-term reliability
• Jacks paired for easy identification of left and
right channels
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance:10,000 megohms
Dielectric Withstanding Voltage: 500VAC at 60 Hz
Working Voltage: 140VDC
• Connectorized by EDAC® connectors for ease of
termination by customer
Current Rating: 100 milliamps
SPECIFICATIONS
MATERIALS
JACKS
EDAC Mating Plugs
Part Number
Frame: Nickel-plated steel
Description
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded contacts
Assembly Screws: Zinc-plated steel
Welded Contacts: Gold alloy
516-090-000-301
516-090-000-302
516-120-000-101
516-120-000-102
516-290-500
90 Pin male w/screw
90 Pin male w/nut
120 Pin male w/screw
120 Pin male w/nut
Terminal solder-style
Terminal crimp-style
PANEL
516-290-590
Front Channel: Black anodized aluminum
Frame & Cover: C.R.S. black epoxy painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Polyester
Ordering Information
Part
Type of No. of
Number
TT96EDACNO
TT96EDACNS
Jack
TT
TT
Jacks
96
96
Description
Normals Brought Out (120 pin EDAC)
Normals Strapped (90 pin EDAC)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
TT96 EDAC SERIES 179
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT96 EDAC SERIES (continued)
Standard Audio Configuration Wiring (S.A.C.)
90 Pin Plug Connector
(Normals at jacks)
Standard Audio Configuration Wiring (S.A.C.)
120 Pin Plug Connector
(Normals brought out)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
180 TT96K PATCHKIT SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TTP96K PATCHKIT SERIES
TTP96K1FN
The TTP96K Patchkit Series offers the end user a rugged cable tray
to support rear cabling. Heavy duty construction takes weight off the
back of the jacks for increased reliability. Available in 1.75" or 3.5"
height versions.
FEATURES AND BENEFITS
PANEL
• Kit features 96 TT jacks in one rack space
(1.75" high) or two rack spaces (3.5" high)
• Jack blocks can be removed from the front
for easy soldering
• Dust tray limits dirt, dust and contamination
of jack terminals
• Wire management straps are adjustable and reusable
• Attractive, corrosion resistant nickel-plated jacks
• Steel frame jack for superior jack life
• Extra wide labeling strips provide maximum space
• Rugged, attractive black anodized aluminum
face will not break or rust
• Three jack configurations available for the exact
switching arrangement you need: full normal,
half normal, and non-normal (open circuit)
• Fanned solder terminals for easier solder
connections
Front Channel: Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black polycarbonate 94V-0
Designation Strip Covers: Clear polycarbonate
Jack Inserts: Thermoplastic polyester
MECHANICAL
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: 0°C to +50°C
ELECTRICAL
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500VAC at 60 Hz
Working Voltage: 140VDC maximum
Current Rating: 100 milliamps
• Gold switching contacts for long-term reliability
in normal-through connections
SPECIFICATIONS
MATERIALS
JACKS
Ordering Information
Part
Number
Type of
Jack
No. of
Jacks
Description
1.75" High, full normals
Frame: Nickel-plated steel
TTP96K1FN
TTP96K1HN
TTP96K1NN
TTP96K3FN
TTP96K3HN
TTP96K3NN
TT
TT
TT
TT
TT
TT
96
96
96
96
96
96
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel silver
with welded contacts
Assembly Screws: Nickel-plated steel
Welded Contacts: Gold alloy
1.75" High, half normal
1.75" High, no normals
3.5" High, full normals
3.5" High, half normals
3.5" High, no normals
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
TT96K PATCHKIT SERIES 181
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TTP96K PATCHKIT SERIES (continued)
TTP96K1 SERIES
TTP96K3 SERIES
TOP ROW
TOP ROW
TOP ROW
BOTTOM ROW
BOTTOM ROW
BOTTOM ROW
TTP96K1FN
TTP96K3FN
TTP96K1HN
TTP96K3HN
TTP96K1NN
TTP96K3NN
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
182 MT48K/MT52K PATCHKIT SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MT48K/MT52K PATCHKIT SERIES
MT52K1FN
The MT48/52K Patchkit Series offers the end user a rugged
cable tray to support rear cabling. Heavy duty construction
takes weight off the back of the jacks for increased reliability.
Available in 1.75" or 3.5" height versions.
FEATURES AND BENEFITS
MECHANICAL
• Kit features 48 1/4" longframe jacks in one rack
space (1.75" high) or in two rack spaces (3.5" high) or
52 1/4" longframe jacks in one rack space (1.75" high)
• Allows user to add cable and termination panel
• Removable jack panel from the front allows
easy soldering of wire connections
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: 0°C to +50°C
ELECTRICAL
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500VAC at 60 Hz
Working Voltage: 140VDC maximum
Current Rating: 100 milliamps
• Jacks have gold switching contacts
• Fanned solder terminals for easier soldering
• Offset ground lugs allow easy bussing of
ground with one wire
• Jacks have a nickel-plated frame and
assembly screws
• Wire management straps are reusable and adjustable
Ordering Information
Part
Type of No. of
SPECIFICATIONS
MATERIALS
JACKS
Frame: Stamped nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded contacts
Assembly Screws: Nickel-plated steel
Welded Contacts: Gold alloy
Number
Jack Jacks Height Description
MT48K1NS
MT48K1FN
MT48K1HN
MT48K1NN
MT52K1NS
MT52K1FN
MT52K1HN
MT52K1NN
MT48K3FN
MT48K3HN
MT48K3NN
MT52K3FN
MT52K3HN
MT52K3NN
MT
MT
MT
MT
MT
MT
MT
MT
MT
MT
MT
MT
MT
MT
48
48
48
48
52
52
52
52
48
48
48
52
52
52
1.75"
1.75"
1.75"
1.75"
1.75"
1.75"
1.75"
1.75"
3.5"
3.5"
3.5"
3.5"
3.5"
Normals strapped
Full normals
Half normals
No normals
Normals strapped
Full normals
Half normals
No normals
Full normals
Half normals
No normals
Full normals
Half normals
No normals
PANEL
Front Panel: Thermoplastic
Frame: C.R.S. black epoxy paint
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers:
Clear polycarbonate
3.5"
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
MT48K/MT52K PATCHKIT SERIES 183
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MT48K/MT52K PATCHKIT SERIES (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
184
MT48/MT52 PATCHBAY SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MT48/MT52 PATCHBAY SERIES
MT48FN
The MT48/52 Series patchbays offer a rugged cable tie bar
to support rear cabling. Also available is the normals strapped
configuration which has the shunts or normals tied together, top
to bottom jacks.
Kwik-change® Designation Strip: Extruded aluminum, black
anodized
FEATURES AND BENEFITS
• Units feature either 48 or 52
Marking Strip:
MT Jax®
White plastic, matte finish
Marking Strip Cover:
Clear, extruded plastic
• Steel frame jacks for superior jack life
• Attractive, corrosion resistant nickel-plated jacks
• Gold switching contacts for long-term reliability in normal-
through connections
• Offset ground terminal for ease in making common ground
buss connections
• Fanned solder terminals for
easier solder connections
• Cable tie bar takes the weight
of cables off the jacks
MECHANICAL
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: 0˚C to +50˚C
ELECTRICAL
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500VAC at 60 Hz
Working Voltage: 140VDC
maximum
Current Rating: 100 milliamps
• Four jack configurations
available for the exact switching arrangement: full normal,
half normal, non-normal, and normals strapped
SPECIFICATIONS
MATERIALS
JACKS
Frame: Steel, nickel-plated
Bushing: Brass, nickel-plated
Springs: Nickel silver, solder lugs
Ground Terminal: Nickel silver,
solder lugs
Switching Contacts: Welded, gold alloy
Insulation: Phenolic spacers, rigid PVC tubing through stack
Screws: Steel, nickel-plated
Ordering Information
Part
Type of
Jack
MT
No. of
Jacks
48
48
48
48
52
52
52
Number
MT48FN
MT48HN
MT48NN
MT48NS
MT52FN
MT52HN
MT52NN
MT52NS
Description
Full normals
Half normals
No normals
Normals strapped
Full normals
Half normals
No normals
MT
MT
MT
MT
PANEL
Jack Panel: Thermoplastic
Cable Support Bracket: 5/16”
diameter black epoxy painted steel rod
Screws (designation strip): Steel, black zinc-plated
Screws (mounting jack): Steel, nickel plated
MT
MT
MT
52
Normals strapped
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
MT48/MT52 PATCHBAY SERIES
185
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MT48/MT52 PATCHBAY SERIES (continued)
MT52 SERIES
MT48 SERIES
YMT332BN
YMT334BN
YMT389N
JACK SCHEMATICS
“N” SUFFIX DENOTES WELDED GOLD CONTACTS
AND NICKEL-PLATED FRAME
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
186 TTP96AS PATCHBAY SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TTP96AS PATCHBAY SERIES
TTP96AS
The TTP96AS Series of patchbays offer a rugged
cable tie bar to support rear cabling.
FEATURES AND BENEFITS
PANEL
• Unit features 96 TT jacks
Frame: Black anodized aluminum
Inserts: Polyester, glass filled, 94V-0
Cable Support Bar: Cold rolled steel, nickel-plated
Designation Strips: Thermoplastic, 94V-0
Designation Strip Covers:
• Attractive, corrosion resistant nickel-plated jacks
• Steel frame jack for superior jack life
• Extra wide labeling strips provide maximum space
• Rugged cable tie bar takes the weight of
cables off the jacks
Clear thermoplastic, SE-1
• Rugged, attractive black anodized aluminum
face will not break
Marking Strip: Rigid vinylite
Jack Mounting Screws: Steel, plated
Screws: Steel, black plated
• Three jack configurations available for the exact
switching arrangement you need: full normal,
half normal, and open circuit panel
• Fanned solder terminals for easier solder
connections
• Offset ground terminal for ease in making
common ground buss connections
• Gold switching contacts for long-term reliability
in normal-through connections
MECHANICAL
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lbs. minimum
Environmental: 0°C to +50°C
ELECTRICAL
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500VAC at 60 Hz
Working Voltage: 140VDC maximum
SPECIFICATIONS
MATERIALS
JACKS
Current Rating: 100 milliamps
Frame: Steel, nickel-plated
Bushing: Nickel-plated copper alloy
Springs: Copper alloy solder lugs
Ground Terminal: Steel, tin electrodeposited
Switching Contacts: Welded, gold alloy inlay
over palladium base
Insulation: Rigid plastic spacers, rigid PVC
tubing through stack
Screws: Steel, plated
Ordering Information
Part
Number
TTP96ASFN
TTP96ASHN
TTP96ASNN
Type of
Jack
TT
No. of
Jacks
96
96
96
Description
Full normals
Half normals
No normals
TT
TT
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
TTP96AS PATCHBAY SERIES 187
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TTP96AS PATCHBAY SERIES (continued)
TOP ROW
TOP ROW
TOP ROW
BOTTOM
ROW
BOTTOM
ROW
BOTTOM
ROW
TTP96ASHN
TTP96ASNN
TTP96ASFN
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
188 Q-G®® PATCHBAY SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
Q-G® PATCHBAY SERIES
QGPK332MFB
The QG Patchbay features a 19" rack unit loaded with E Series QG
connectors. These XLR’s have the same panel cut-out, male or female,
silver-plated pins or contacts, and a black finish. All connectors have
solder cup terminals for easy soldering and the inserts are removable
from the back, allowing for easy changes. The one rack unit height
version comes with 16 male, or 16 female, or 8 male and 8 female
connectors. The two rack unit version comes with 16 male and
16 female connectors.We also offer the unit without connectors, but with
the panel cut-outs already punched out. All versions have
a rugged cable tie bar, which takes the weight of the cabling away
from the solder connections.
FEATURES AND BENEFITS
Latch Release: Steel, nickel-plated
Insert Locking Cam: Die-cast zinc
• Available in 1RU or 2RU versions
• Available with or without the connectors
• E Series connectors are silver-plated,
3 pins/contacts with black finish
• Cable tie bar takes the weight of the cables off
the solder terminations
FRAME
Aluminum, black anodized
CABLE TIE BAR
Steel, black epoxy
• Rugged aluminum channel
increases durability
• Silk-screen designation area makes
it easy to re-label channels
SPECIFICATIONS
MATERIALS
CONNECTORS
Housing: Die-cast, black velvet finish
Inserts: Glass-filled thermoplastic
Pin/Contacts: Copper alloy, silver-plated
Ordering Information
Part Number
QGPK116FB
QGPK116MB
QGPK18M8FB
QGPK332MFB
QGPK1B
Height
1.75"
1.75"
1.75"
3.5"
Description
16 female
16 male
8 male, 8 female
16 female( top), 16 male (bottom)
Blank panel
1.75"
3.5"
QGPK3B
Blank panel
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
Q-G®® PATCHBAY SERIES
189
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
Q-G® PATCHBAY SERIES (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
190
HPC PATCHBAY SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
HPC PATCHBAY SERIES
The HPC Patchbay features a 19” rack unit loaded with HPC
Series connectors. Available with either 0.250” Faston terminals
or 0.187” Faston terminals. One rack unit height versions come
with 12 HPC connectors, two rack unit height versions come
with 24 HPC connectors. All versions have a rugged cable
tie bar, which takes the weight of the cabling away from the
connections.
FEATURES AND BENEFITS
• Available in 1RU or 2RU versions
• Available with or without connectors
• HPC Series connectors are compatible with Neutrik
Speakon® connectors
• Cable tie bar takes weight of the cables off the terminations
• Rugged aluminum channel
• Silk-screen designation area makes it easy to re-label chan-
nels
HP CONNECTOR SPECIFICATIONS
See page 38 for details
MATERIALS
Housing: Thermoplastic UL 94V-O rated
Contacts: Silver-plated over copper alloy
FRAME
Aluminum, black anodized
CABLE TIE BAR
Steel, black epoxy
Part
Number
Height
Description
HPCPK112F
HPCPK112F1
HPCPK1B
HPCPK324F
HPCPK324F1
HPCPK3B
1.75"
1.75"
1.75"
3.50"
3.50"
3.50"
12 connectors, 0.250" Fastons
12 connectors, 0.187" Fastons
Blank panel
24 connectors, 0.250" Fastons
24 connectors, 0.187" Fastons
Blank panel
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Neutrik
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
DATA PATCHBAY SERIES 191
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
RS 422 DATA PATCHBAY SERIES
FEATURES AND BENEFITS
• Unit Features either 8,16, 24, or 32 TT style
jacks on the front Panels, to a 9 pin D-Sub
or PPT back Plane.
• All version utilize low capacitance internal wiring
for maximum performance of transferring data
• All standard units are available 1 or 2 rack
units high (1.5 RU available by request)
• Rugged, attractive black epoxyfinished steel
frame chassis
Our standard RS data jackfield series offer a
multiple combination of ports, rack heights, and
back panel terminations which will easily fit into
any television broadcast or video production
where custom data patching is required. Custom
ports and rack height combinations can be
supplied. Contact the factory for details.
RS422 Ordering Information
Part
Number*
No. of
Jacks
Front Panel Back
Layout
Rack
Height
Plane
RS422H48N081 2 x 8
Horizontal
Vertical
Horizontal
Horizontal
Vertical
Vertical
Horizontal
Vertical
9 Pin D-Sub
9 Pin D-Sub
9 Pin D-Sub
9 Pin D-Sub
9 Pin D-Sub
9 Pin D-Sub
9 Pin D-Sub
9 Pin D-Sub
9 Pin D-Sub
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
1
1
1
2
1
2
2
2
2
1
1
1
2
1
2
2
2
2
RS422V4N081
RS422H4N161
RS422H4N162
RS422V4N161
RS422V4N162
RS422H4N242
RS422V4N242
RS422V4N322
2 x 8
2 x 16
2 x 16
2 x 16
2 x 16
2 x 24
2 x 24
2 x 32
SPECIFICATIONS
ELECTRICAL
Internal Wiring:
24 AWG Solid TC, foils shield
Nom Capacitance: 11.5 pF/ft between conductors
21.3 pF/ft between one conductor and conductor
connected to the shield
Vertical
RS422PH4N081 2 x 8
RS422PV4N081 2 x 8
RS422PH4N161 2 x 16
RS422PH4N162 2 x 16
RS422PV4N161 2 x 16
RS422PV4N162 2 x 16
RS422PH4N242 2 x 24
RS422PV4N242 2 x 24
RS422PV4N322 2 x 32
Horizontal
Vertical
Horizontal
Horizontal
Vertical
Vertical
Horizontal
Vertical
Nom. Impedance: 110 Ohms
Vertical
*Add "N" for non-normalled version
See Page 267 for Patchcord Information
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
192 DATA PATCHBAY SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
RS 422 DATA PATCHBAY SERIES
RS422V4N322
32 Vertical Paired Jacks
Front and Back Views
RS422H4N242
24 Horizontal Paired Jacks
Front and Back Views
Ordering Information
Part
Number
No. of
Jacks
Front Panel
Layout
Back
Plane
Rack
Height
RS422H4N081
RS422V4N081
RS422H4N162
RS422V4N162
RS422H4N242
RS422V4N242
RS422V4N322
RS422PH4N081
RS422PV4N081
RS422PH4N162
RS422PV4N162
RS422PH4N242
RS422PV4N242
RS422PV4N322
2 x 8
2 x 8
Horizontal
Vertical
9 Pin D-Sub
1
1
9 Pin D-Sub
2 x 16
2 x 16
2 x 24
2 x 24
2 x 32
2 x 8
Horizontal
Vertical
9 Pin D-Sub
1, 2
1, 2
2
9 Pin D-Sub
Horizontal
Vertical
9 Pin D-Sub
9 Pin D-Sub
2
Vertical
9 Pin D-Sub
2
Horizontal
Vertical
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
PPT Punchdown
1
2 x 8
1
2 x 16
2 x 16
2 x 24
2 x 24
2 x 32
Horizontal
Vertical
1, 2
1, 2
2
Horizontal
Vertical
2
Vertical
2
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
VPP VIDEO PATCHBAY SERIES 193
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
VPP VIDEO PATCHBAY SERIES
VPP24K3HD75T
VJHD*75TX
The VPP Series video patchbays offer a wide variety of options for video patching.
The HD Series meets SMPTE 292M specifications for high definition video signaling,
covering a bandwidth range from DC to 2.4GHz. The SD Series is perfect for serial
digital, with a bandwidth from DC to 1.75GHZ. Both come in either terminated or
non-terminated, 24 or 26 jacks, 1.75" or 3.5" heights.
FEATURES AND BENEFITS
ENVIRONMENTAL
• HD Series meets SMPTE 292M Specifications
• SD Series has a bandwidth from DC to 1.75GHz
• Black thermoplastic modules insulate
jacks from chassis
Operating Temperature: – 40ºC to 65ºC
Storage Temperature: – 55ºC to 85ºC
Thermal Shock: Per MIL-STD-202, Method 107
Moisture and Humidity:
• Jacks feature rugged heavy duty housings
Per MIL-STD-202, Method 106
VIDEO JACK SPECIFICATIONS
ELECTRICAL
Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD)
Characteristic Impedance: 75 ohms
Return Loss: Better than –15 dB
Ordering Information
Part
Number
Type of No. of
Jack Jacks Height Description
Insertion Loss: Better than –.5 dB
Contact Resistance: Less than 20 milliohms
Termination Resistance: 75 W, ±1%
Center Conductor: Accepts .090 pin diameter
VPP24K1HD*75T HD
VPP24K1HD*NT HD
VPP24K1SD*75T SD
VPP24K1SD*NT SD
VPP26K1HD*75T HD
VPP26K1HD*NT HD
VPP26K1SD*75T SD
VPP26K1SD*NT SD
VPP24K3HD*75T HD
VPP24K3HD*NT HD
VPP24K3SD*75T SD
VPP24K3SD*NT SD
VPP26K3HD*75T HD
VPP26K3HD*NT HD
VPP26K3SD*75T SD
VPP26K3SD*NT SD
24
24
24
24
26
26
26
26
24
24
24
24
26
26
26
26
1.75"
1.75"
1.75"
1.75"
1.75"
1.75"
1.75"
1.75"
3.5"
3.5"
3.5"
3.5"
3.5"
Terminated
Non-term
Terminated
Non-term
Terminated
Non-term
Terminated
Non-term
Terminated
Non-term
Terminated
Non-term
Terminated
Non-term
Terminated
Non-term
MECHANICAL
Mechanical Shock: Per MIL-STD-202, Method 213,
Test condition I
Vibration: Per MIL-STD-202, Method 201
Insertion Force: 12 lbs. maximum
Withdrawal Force: 3 lbs. minimum
Life Cycle: 30,000
MATERIAL
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy, gold plated
Switching Springs: Copper alloy, gold plated
Grounding Contacts:
HD Series - Copper alloy, gold plated
SD Series - Copper alloy, nickel plated
Insulators: Thermoplastic, UL 94V-0 rated
3.5"
3.5"
3.5"
*Add “N” for non-normalled version
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
VPP VIDEO PATCHBAY SERIES
194
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
VPP VIDEO PATCHBAY SERIES (continued)
NON-NORMALLED
TERMINATED
NORMALLED
TERMINATED
NORMALLED
NON-TERMINATED
NON-NORMALLED
NON-TERMINATED
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
195
VPP VIDEO PATCHBAY SERIES
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
VPP VIDEO PATCHBAY SERIES (continued)
Ordering–Individual Jacks
Part Number
VJHD*75TX
VJHD*NTX
VJSD*75TX
VJSD*NTX
Type
HD
HD
SD
Description
Terminated
Non-terminated
Terminated
SMITH CHART
(TYPICAL)
SD
Non-terminated
*Add “N” for non-normalled version
FREQUENCY (MHz)
FREQUENCY (MHz)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
MVP MIDSIZE VIDEO PATCHBAY SERIES
196
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MVP MIDSIZE VIDEO PATCHBAY SERIES
MVP32K3*75T
MVJ*75T
The MVP Series video patchbays offer outstanding
performance and high density. Patchbays consist of
32 jacks in either 1RU or 2RU heights, jacks come either
terminated or non-terminated. These jacks are rated
from DC to 3 GHz, and are rated at 30,000 lifecycles.
FEATURES AND BENEFITS
MATERIAL
Housing: Zinc alloy, nickel plated
• Midsize video jacks rated from DC to 3 GHz
Center Contacts: Copper alloy, gold plated
Switching Springs: Copper alloy, gold plated
Grounding Contacts: Copper alloy, gold plated
BNC Insulators: Teflon
• 32 midsize jacks mounted either 1RU, 1.5RU or 2RU panel
• Available in terminated or non-terminated configurations
SPECIFICATIONS
MATERIAL
Frame: Aluminum, black anodized
Actuators: Thermoplastic, UL94V-0 rated
Designation Strips: Vinylite, white
ENVIRONMENTAL
Designation Strip Covers: Lexan, transparent
Jack Inserts: Thermoplastic, UL 94V-0 rated
Operating Temperature: – 40ºC to 65ºC
Storage Temperature: – 55ºC to 85ºC
Thermal Shock: Per MIL-STD-202, Method 107
Moisture and Humidity: Per MIL-STD-202, Method 106
MIDSIZE VIDEO JACK SPECIFICATIONS
ELECTRICAL
Rated Bandwidth: 3.0 GHz
Characteristic Impedance: 75 ohms
Return Loss: See Typical Return Loss Chart
Insertion Loss: See Typical Insertion Loss Chart
Contact Resistance: Less than 20 milliohms
Termination Resistance: 75 W, ±1%
Ordering Information
Part
Type
Number
of Jack Height
Description
Terminated
Non-terminated
Terminated
Center Conductor: Accepts .048 pin diameter
MVP32K1*75T
MVP32K1*NT
MVP32K3*75T
MVP32K3*NT
Midsize
Midsize
Midsize
Midsize
1.75"
1.75"
3.5"
MECHANICAL
Mechanical Shock: Per MIL-STD-202,
Method 213, Test condition I
Vibration: Per MIL-STD-202, Method 201
Insertion Force: 12 lbs. maximum
Withdrawal Force: 3 lbs. minimum
Life Cycle: 30,000
3.5"
Non-terminated
* Add “N” for non-normalled version
Note: For 1.5RU (2.62" height), use K2
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
197
MVP MIDSIZE VIDEO PATCHBAY SERIES
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MVP MIDSIZE VIDEO PATCHBAY SERIES (continued)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
MVP MIDSIZE VIDEO PATCHBAY SERIES
198
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MVP MIDSIZE VIDEO PATCHBAY SERIES (continued)
SMITH CHART (TYPICAL)
Ordering Information
Part
Number
MVJ*75TX
MVJ*NTX
Description
Terminated
Non-terminated
*Add “N” for non-normalled version
RETURN LOSS (TYPICAL)
RETURN LOSS (TYPICAL)
I
N
S
E
R
T
I
R
E
T
U
R
N
0
0
G
O
O
D
-1
-2
-3
-4
-5
-5
-10
-15
-20
-25
-30
-35
O
N
L
O
S
S
(dB)
G
O
O
D
L
O
S
S
(dB)
0
600
1200
1800
2400
3000
0
600
1200
1800
2400
3000
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
199
VAP VIDEO/AUDIO PATCHBAY SERIES
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
VAP VIDEO/AUDIO PATCHBAY SERIES
VJHD*75TX
VAPK3HD*75T
The VAP Series combines audio and video in one convenient
patchbay. Standard versions consist of 13 video jacks and 26
long-frame audio jacks into one unit. Options include HD Series
video jacks which are rated from DC to 2.4GHz or SD Series
rated from DC to 1.5GHz. Both come in either terminated or
non-terminated jacks. The MT Style audio jacks all have
nickel-plated steel frames and gold-plated switching contacts.
Flared terminals make soldering easier. All audio jacks are
T,R,S, TN, and RN. Individual modules are useful for custom
configurations.
Grounding Contacts:
FEATURES AND BENEFITS
HD Series - Copper alloy, gold plated
SD Series - Copper alloy, nickel plated
Insulators: Thermoplastic, UL 94V-0 rated
• Combines 13 video jacks and 26 long-frame
audio jacks into one patchbay
• Available with either HD Series or SD Series
video jacks
• All audio jacks are nickel-plated with steel frames
and gold-plated switching contacts
• Audio modules consist of 4 YMT334BN jacks,
video modules consist of 2 dual video jacks
ENVIRONMENTAL
Operating Temperature: – 40ºC to 65ºC
Storage Temperature: – 55ºC to 85ºC
Thermal Shock: Per MIL-STD-202, Method 107
Moisture and Humidity: Per MIL-STD-202, Method 106
VIDEO JACK SPECIFICATIONS
ELECTRICAL
Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD)
Characteristic Impedance: 75 ohms
Return Loss: Better than –15 dB
Insertion Loss: Better than –.5 dB
Contact Resistance: Less than 20 milliohms
Termination Resistance: 75 W, ±1%
Center Conductor: Accepts .090 pin diameter
Ordering Information
Part
Type of
Number
Jack Height Description
VAPK1HD*75T HD
1.75"
1.75"
1.75"
1.75"
3.5"
3.5"
3.5"
3.5”
Terminated
Non-terminated
Terminated
Non-terminated
Terminated
Non-terminated
Terminated
VAPK1HD*NT
VAPK1SD*75T
VAPK1SD*NT
HD
SD
SD
MECHANICAL
VAPK3HD*75T HD
Mechanical Shock: Per MIL-STD-202,
Method 213, Test condition I
Vibration: Per MIL-STD-202, Method 201
Insertion Force: 12 lbs. maximum
Withdrawal Force: 3 lbs. minimum
Life Cycle: 30,000
VAPK3HD*NT
VAPK3SD*75T
VAPK3SD*NT
Modules
HD
SD
SD
Non-terminated
VMAFN
MT
HD
HD
SD
SD
4- YMT334BN jacks
VMVHD*75T
VMVHD*NT
VMVSD*75T
VMVSD*NT
2- HD terminated jacks
2- HD non-terminated jacks
2- SD terminated jacks
2-SD non-terminated jacks
MATERIAL
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy, gold plated
Switching Springs: Copper alloy, gold plated
*Add “N” for non-normalled version
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
200
VAP VIDEO/AUDIO PATCHBAY SERIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
VAP VIDEO/AUDIO PATCHBAY SERIES (continued)
VAPK3HD*75T
VAPK1HD*75T
VJ SERIES
MT SERIES
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
MBPK VIDEO/AUDIO PATCHBAY SERIES 201
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MBPK VIDEO/AUDIO PATCHBAY SERIES
MBPK175T
The MBPK Series combines audio and video in one
convenient patchbay. The patchbay consists of 16 midsize
video jacks and 48 TT bantam jacks. Options include 75 Ohm
terminated or non-terminated video jacks. All TT bantam jacks
have T, R, S, TN and RN solder terminals. Audio jacks have
nickel-plated steel frames, gold-plated crossbar switching
contacts and flared terminals for easier soldering.
VIDEO JACK SPECIFICATIONS
See page 196 for details
AUDIO JACK SPECIFICATIONS
See page 164 for details
FEATURES AND BENEFITS
Combines 16 midsize video jacks and
48 TT bantam audio jacks
MATERIALS
FRAME
Aluminum, black anodized
Video jacks are rated from DC to 3.0 GHZ
All audio jacks are nickel-plated with steel frames and gold-
plated crossbar switching contacts
For non-terminated version, use part no. MBPK1NT
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
202
"
LONG FRAME 1/4 TELEPHONE JACK PANELS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
LONG FRAME (1/4") TELEPHONE JACK PANELS
STANDARD SINGLE ROW JACK PANELS
SERIES 1200 AND 1400
SERIES 1200
Panels accomodate 24 T-Jax® jacks in standard 1.75 inch x
19 inch racks. Jack openings are on alternate .625 inch and
.750 inch spacing; twin plugs cannot be cross-connected
between adjacent jack pairs. Includes designation strips
(marking strips and transparent plastic covers).
Series 1200
*Shown with optional
SERIES 1300
jacks. See next page for
Same as Series 1200, except MT-Jax® are used in panel
specific part numbers.
assemblies.
SERIES 1400
Mounts 26 T-Jax®. Openings are on continuous .625 inch
centers. Twin plug can be used on any two adjacent jacks.
Single designation strip (marking strip, and plastic cover).
WEco equivalent is 230B.
SERIES 1400300
Same as Series 1400, except designation strip is
Kwik-Change® type which is easier to install and remove and
provides larger vertical designation marking area. Strip holder
is recessed into top of panel for additional panel strength.
1400301 has single height Kwik-Change® designation strip.
1400315 has a single height Kwik- Change® designation strip
along bottom of panel and double height strips above jacks.
Top designation strip has .188 inch overhang above 1.75 inch
panel height, to help seal small opening between adjacent
panels. CAUTION: Because of this overhang, 1400315
cannot be mounted one above another in a rack.
Series 1400
*Shown with optional
jacks. See next page for
specific part numbers.
SERIES 1500
Same as Series 1400 except MT-Jax® are used in panel
assemblies.
1400301
*Shown with optional
jacks. See next page for
specific part numbers.
SPECIFICATIONS
Jack Panel: General purpose black phenolic resin
Frame (except 1400300): Plated, steel
End Bracket and Side Strip (1400300 only): Cold rolled
plated steel
Designation Strip (except 1400300): Clear plastic.
"Kwik-Change" Designation Strip (1400300): Extruded
aluminum, black anodized and black thermoplastic
UL 94V-0.
Marking Strip: White plastic, matte finish.
Marking Strip Cover: Clear extruded plastic.
Screws: #6-32 x .25 inch phillips RHMS (for mounting jacks).
1400315
*Shown with optional
jacks. See next page for
specific part numbers.
ORDERING
Part number table lists blank panels and popular jack panel
assemblies. If you wish to mount components on basic panels,
order jacks, lamp jacks, and switches separately. (See
appropriate section in this catalog.) For other panel assemblies,
provide complete details with your inquiry or order. Switchcraft
can build special assemblies to your requirements in small
or large quantities. See wire wrapping data. Series 1200
and 1400 are available with holes pre-drilled for vertical
designation strips (Series DS320). Add prefix "D" to part
numbers for pre-drilled panels: D1200, D1400301, etc.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
"
LONG FRAME 1/4 TELEPHONE JACK PANELS 203
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
LONG FRAME (1/4") TELEPHONE JACK PANELS (continued)
Part Numbers
Assembly with Jacks
With Solder Lugs
Part Numbers
Description
Assembly with Jacks
With Wire-Wrapping
Terminals
Number
of Jacks
Type of
Jacks Installed
Panel Only
Straight
Offset
-
1200
-
-
None
24
-
1332A
◊X1332A
MT332A , XMT332A or WMT332A MT-Jax®
MT332B or XMT332B MT-Jax®
◊W1332A
-
-
◊1332B
◊X1332B
24
-
◊1334B
◊X1334B
24
MT334B,XMT334B or WMT334B MT-Jax®
◊W1334B
-
1400
-
-
None
None
None
26
-
1400301
-
-
-
◊1400315
-
1532A
◊1532A301
◊1532B
◊1532B301
◊1534B
-
-
MT332A or XMT332A MT-Jax®
MT332A or WMT332A MT-Jax®
MT332B MT-Jax®
MT332B, XMT332B or WMT332B MT-Jax®
MT334B, XMT334B or WMT334B MT-Jax®
WMT334B MT-Jax®
-
-
-
-
-
-
-
-
X1532A
◊W1532A301
-
-
26
-
26
◊W1532B301
◊W1534B
◊W1534B301
-
◊X1532B301
◊X1534B
-
26
26
26
-
◊X1542B315
26
XMT342B MT-Jax®
◊ Special order only; contact factory for price and delivery.
1. Prefix “X” denotes offset lugs for buss wiring.
Jack Mounting Screws: #6-32, P10725, can be ordered separately.
Contact Switchcraft.
Legend Cards (Series 1200, 1300) - A1029
Legend Windows (Series 1200, 1300) - A1030
Series 1200
Series 1400
Series 1400-301
Series 1400-315
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
"
204
LONG FRAME 1/4 TWIN ROW JACK PANELS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
LONG FRAME (1/4") TWIN ROW JACK PANELS
Series 2400
Series 2600301
*Shown with optional jacks,
See next page for specific
part numbers.
*Shown with optional jacks,
See next page for specific
part numbers.
Series 2600
*Shown with optional jacks,
See next page for specific
part numbers.
strength. 2600301 has single height designation strips (one
above and below each row of jacks).
STANDARD TWIN ROW JACK PANELS
SERIES 2400, 2600, 2600300, 2700300 – PHENOLIC
2600310
Twin row jack panels offer greater jack density - up to 52 jacks
per panel. All panels fit standard 19" wide racks. Blank panels
or standard assemblies can be ordered from Switchcraft.
Series 2600 panels are direct equivalent to WEco #230A.
Has a double height strip above top row and a steel reinforcing
strip below bottom row. Top strip has .188" overhang above
1.75" panel height, helping seal the small opening between
adjacent panels. Note: overhang prevents mounting panel one
above another in a rack.
SERIES 2400
Twin row panel accommodates 48 T-Jax®. Openings are on
alternate .625" and .75" centers. Panel is 2.125" high and fits
standard 19" racks. Twin plug cannot be cross-connected
between jacks in adjacent quads, but may be connected either
horizontally or vertically in the same quad. Single designation
strip.
SERIES 2700
Same as Series 2600 except MT-Jax® are used in panel
assemblies. The series is available with cable tie bar.
ORDERING
1. Order basic panels and popular assemblies by part number
from table.
SERIES 2500
Same as Series 2400 except MT-Jax® are used.
2. For special panels provide complete details with your inquiry
or order.
3. Series 2600 is available with hole pre-drilled for vertical
designation strips, Series DS320. Add prefix “D” to part
number (D2600301, etc.).
SERIES 2600
Twin row panel accommodates 52 T-Jax® in standard 1.75" x
19" racks. Jack openings are on continuous centers. Twin plug
can be connected to any two adjacent jacks, either horizontally
or vertically. Two designation strips. WEco equivalent is #230A.
4. Jack Mounting Screws: #6-32, P10725, can be ordered
separately. Contact Switchcraft.
SERIES 2600300
Same as Series 2600, except designation strips are
Kwik-Change® type, providing larger vertical marking area. Top
strip holder is recessed into top of panel to provide additional
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
"
LONG FRAME 1/4 TWIN ROW JACK PANELS – PART NUMBERS
205
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
LONG FRAME (1/4") TWIN ROW JACK PANELS (continued)
Part Numbers
Part Numbers
Description
Assembly with Jacks Having
Solder Lugs
Assembly with Jacks
Having Wire-
Wrapping Terminals
Number
of Jacks
Panel Only
Straight
Offset1
Type of Jack Installed
-
None
48
2400
-
◊2432A
◊2432B
◊2434B
◊2532A
◊2532B
◊2533
◊2533B
◊2534B
◊2542B
◊2544B
◊2588
◊2589
-
-
-
T332A
T332B
-
◊X2432A
-
48
-
◊X2432B
-
48
T334B or XMT334B T-Jax®
MT332A, XMT332A or WMT332A MT-Jax®
MT332B or XMT332B MT-Jax®
MT333 MT-Jax®
MT333B or WMT333B MT-Jax®
MT334B or XMT334B MT-Jax®
MT342B MT-Jax®
MT344B, MT-Jax®
MT388, Twin MT-Jax®
MT389 Twin MT-Jax®
-
◊X2434B
◊W2532A
48
-
◊X2532A
-
48
-
◊X2532B
-
48
-
-
◊W2533B
48
-
-
-
48
-
X2534B
-
48
-
-
-
48
-
-
-
24
-
-
-
24
-
-
-
None
None
None
52
2600
-
-
-
(WEco equivalent #230A)
2600301
-
-
2600310
-
-
-
MT332A or XMT332A MT-Jax®
MT332A, XMT332A or WMT332A MT-Jax®
MT332B, XMT332B or WMT332B MT-Jax®
MT332B, XMT332B or WMT332B MT-Jax®
MT333B, MT-Jax®
MT334B or XMT334B MT-Jax®
MT334B, XMT334B or WMT334B MT-Jax®
MT389 or WMT389 Twin MT-Jax®
XT332A
-
-
-
-
-
-
-
-
-
-
◊2732A
◊2732A301
◊2732B
◊2732B301
◊2733B
◊2734B
◊2734B301
◊2789
-
◊X2732A
◊X2732A301
◊X2732B
◊X2732B301
-
◊W2732A301
52
◊W2732B
52
◊W2732B301
52
-
52
-
52
◊X2734B
◊X2734B301
-
◊W2734B301
52
◊W2789
26
-
-
48
◊X2832A
◊X2932A
48
XMT332A
-
1. Prefix “X” denotes offset lugs for buss wiring.
◊ Special order only; contact factory for price and delivery.
Series 2600300 and 2700301
Series 2400 and 2500
Series 2600 and 2700
Series 2600310 and 2700310
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
"
206 LONG FRAME 1/4 MODULAR TWIN ROW JACK PANELS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS
SERIES JP072S32A
*Shown with optional jacks, See next
page for specific part numbers.
SERIES JP122S34B
*Shown with optional jacks, See next page
for specific part numbers.
SERIES JP032S32B
*Shown with optional jacks, See next page
for specific part numbers.
SERIES JP012000 THROUGH JP122000
SERIES JP052000
Series JP® Modular Jack Panels feature a modular packaging
concept. Jacks are mounted on inserts then complete
modular insert assemblies are mounted to the panel from the
rear. Mounting and wiring are quick and easy. Individual jacks
or complete inserts can be removed from the panel with
minimum disturbance to wiring and adjacent jacks. JP panels
offer three mounting styles (standard rack mount, flush
mount, and extension mount), staggered or continuous-center
panel openings, two panel lengths (19" and 23"), WEco
equivalents, Kwik-Change® designation strips, precision
manufactured modular parts, rugged black anodized
aluminum frames and quick and easy module or jack
removal/installation.
Same as JP012000, except designed for flush mounting or standoff
mounting. Switchcraft Bracket Kit K107; Contact Switchcraft.
SERIES JP062000
Same as JP052000, except 23" wide (includes 14 inserts
which accommodate 56 MT-Jax®).
SERIES JP072000
Same as JP012000, except mounts 52 MT-Jax® and includes
13 black module inserts. Modular equivalent of WEco #230A.
SERIES JP082000
Same as JP072000, except 23" wide (includes 16 inserts which
accommodate 64 MT-Jax®). Modular equivalent to WEco #231A.
SERIES JP092000
Each module insert has four holes which mount four MT-Jax®
or two Twin-Jax®. Each modular jack panel is supplied with
two Kwik-Change® designation strips. Mounting strips are
integral with panel, and marking strips and clear covers snap
into place quickly and easily.
Same as JP072000, except with 5.375" extension brackets
which permit access to rear of jacks from front of panel.
Brackets are supplied mounted to panel.
SERIES JP102000
Same as JP092000, except 23" wide (includes 16 inserts
which accommodate 64 MT-Jax®).
SERIES JP012000
Standard 1.75" x 19" size for console, rack or control panel
mounting. Mounts 48 MT-Jax®. Openings are on alternate
.625" and .75" centers in each row. A twin plug fits jacks
horizontally or vertically in the same quad, but cross-connecting
between quads is not possible. Includes 12 black module
inserts, insert mounting screws and two Kwik-Change®
designation strips.
SERIES JP112000
Same as JP072000, except designed for flush mounting or standoff
mounting. Switchcraft Bracket Kit K107; Contact Switchcraft.
SERIES JP122000
Same as JP112000, except 23" wide (includes 16 inserts
which accommodate 64 MT-Jax®).
SPECIFICATIONS
SERIES JP022000
Same as JP012000, except 23" wide (includes 14 inserts
Panel and Integral Designation Mounting Strips:
Aluminum alloy, extruded. Black anodized per MIL-A-8625
Module Insert: Molded plastic, matte finish. Black standard;
white, red, green, blue or yellow available on special order
Marking Strip: White matte finish plastic
Designation Strip Cover: Extruded clear plastic
Screws: #6-32 x 5/15", PHMS, for jack mounting;
#4-40 x 1/2" phillips PHMS, for module insert mounting
Brackets: 5.375", aluminum alloy black anodized finish
(JP032000, JP042000, JP092000, JP102000)
Screws, Mounting Bracket: #6-32, self-tapping supplied.
which accommodate 56 MT-Jax®).
SERIES JP032000
Same as JP012000, except with 5.375" extension brackets
which permit access to rear of jacks from front of panel.
Brackets are supplied mounted to panel.
SERIES JP042000
Same as JP032000, except 23" wide (includes 14 inserts
which accommodate 56 MT-Jax®).
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
"
LONG FRAME 1/4 MODULAR TWIN ROW JACK PANELS 207
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued)
ORDERING
Order popular assemblies by part number from table. If you
wish to mount components on the panels, order blank panels
and refer to MODULE INSERTS below. On special order,
various combinations of colored inserts mounted in basic
panels, as well as many different types of complete
assemblies are possible. Provide complete details with your
inquiry or order. Standard mount panels are available with holes
pre-drilled for vertical designation strips, Series DS320. Add
prefix “D” to part number (JPD012000, JPD022000,
JPD072000, JPD082000, etc.).
Part Numbers*
Part Numbers*
# of
# of
Jacks
Assembly with Jacks
Having Solder Lugs
MT-Jax®
Installed
Assembly with Jacks
Having Solder Lugs
MT-Jax®
Installed
Panel Only
Jacks
None1
52
Panel Only
JP012000
-
◊JP012S32A
◊JP012S32B1
JP012S34B1
-
None
48
◊JP072000
-
◊JP072S32A
◊JP072S32B
JP072S34B
-
MT332A
MT332B
MT334B
-
MT332A
MT332B
MT334B
-
52
-
48
-
52
None2
-
48
-
◊JP022000
None
56
◊JP082000
64
MT332A
MT332B
MT334B
-
◊JP022S32A
◊JP022S32B
◊JP022S34B
-
MT332A
MT332B
MT334B
-
◊JP082S32A
◊JP082S32B
◊JP082S34B
-
64
-
56
-
64
-
56
-
None
52
◊JP032000
None
48
◊JP092000
MT332A
MT332B
MT334B
-
◊JP032S32A
◊JP032S32B
◊JP032S34B
-
MT332A
MT332B
MT334B
-
◊JP092S32A
◊JP092S32B
◊JP092S34B
-
52
-
48
-
52
-
48
-
None
64
◊JP042000
None
56
◊JP102000
MT332A
MT332B
MT334B
-
◊JP042S32A
◊JP042S32B
◊JP042S34B
-
MT332A
MT332B
MT334B
-
◊JP102S32A
◊JP102S32B
◊JP102S34B
-
64
-
56
-
64
-
56
-
None
52
JP052000
None
48
◊JP112000
MT332A
MT332B
MT334B
-
◊JP052S32A
◊JP052S32B
◊JP052S34B
-
MT332A
MT332B
MT334B
-
◊JP112S32A
◊JP112S32B
◊JP112S34B
-
52
-
48
-
52
-
48
-
None
64
◊JP062000
None
56
◊JP122000
MT332A
MT332B
MT334B
-
-
-
◊JP062S32A
◊JP062S32B
◊JP062S34B
MT332A
MT332B
MT334B
-
-
-
◊JP122S32A
◊JP122S32B
◊JP122S34B
64
56
64
56
1. Add a “1” to the part number to specify a cable tie bar.
Mounting Screws: #6-32, P10725 for jack mounting and #4-40,
P2435 for insert mounting, can be ordered separately.
* Panels with jacks having wire-wrapping terminals are approximately 10%
higher in price. Contact Switchcraft.
1. Non-modularized equivalent is WEco #230A.
2. Non-modularized equivalent is WEco #231A.
◊ Special order only; contact Switchcraft.
MODULE INSERTS
JP9942
JP9922
JP9902
Part Number
JP9942
Description
Black module insert with four jack openings
(less jacks). Includes two, #4-40 machine
screws for mounting.
JP9922
JP9902
Black module insert with two jack openings
(less jacks). Includes two, #4-40 machine
screws for mounting.
Standard color is black, matte finish plastic. Contact
Switchcraft. Inserts are ideal for mounting directly in control
panels and chassis where convenient jack connections are
required. Applications include test outlets, remote equipment
connections and headsets such as those used in telephone
and telecommunications equipment.
Black module insert without holes. Includes
two, #4-40 machine screws for mounting.
Used where no jacks are needed.
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
"
( )
208
LONG FRAME 1/4 MODULAR TWIN ROW JACK PANELS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued)
Series JP01-2000, JP02-2000, JP07-2000, JP08-2000
Series JP03-2000, JP04-2000, JP09-2000, JP010-2000
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
"
LONG FRAME 1/4 MODULAR TWIN ROW JACK PANELS 209
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued)
Series JP052000, JP062000, JP112000, JP122000
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
"
( )
210
LONG FRAME 1/4 MODULAR 3 ROW JACK PANELS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
LONG FRAME (1/4") MODULAR 3 ROW JACK PANELS
Four series of cross-connect jack panels are available in 19"
and 23" widths. Individual modules are easily dismounted
from the front. On special order, panels can be supplied with
a variety of standard telephone jacks.
SERIES JP312000 AND JPD312000
2.655" x 19" size for console, rack or control panel mounting.
Mounts 24 twin jacks and 24 single jacks. Openings are on
.625" centers in each row. A twin plug fits jacks horizontally
or vertically in same quad. Bottom row has 24 single jacks.
Two Kwik®-Change designation strips are supplied. Series
SPECIFICATIONS
JPD31 has pre-drilled and countersunk holes for mounting
vertical designation strips. See “ORDERING”.
Panel and Designation Strips: Aluminum alloy,
extruded. Black anodized per MIL-A-8625.
SERIES JP322000 AND JPD322000
Same as JP312000 and JPD312000, except 23" wide
(includes 14 inserts which accommodate 28 twin jacks and
28 single jacks).
Module Insert: Molded plastic, matte finish. Black standard;
white, red, green, blue or yellow available on special order.
Marking Strip: White matte finish plastic.
Designation Strip Cover: Extruded clear plastic.
Screws: #6-32 x 5/16" PHMS, for jack mounting;
#4-40 x 1/2" phillips FHMS, for module insert mounting.
MODULE INSERTS
Available with 6 holes or blank faces. See “ORDERING”
for colored modules.
ORDERING
Part Number
JP312000
Description
Order basic assemblies by part number from table. On
special order, various combinations of colored inserts
mounted in basic panels, as well as many types of
complete assemblies are possible. Provide complete
details with your inquiry or order.
19" wide x 2.625" high panel with 12 black modules
installed. Two, full width Kwik® -Change designation
strips are included.
JPD312000
JP322000
Same as JP312000, except holes pre-drilled for
mounting vertical designation strips at each side.
Standard mount panels are available with holes pre-drilled
for vertical designation strips, Series DS320. Add prefix “D”
to part number (JPD312000, JPD322000, etc.). Refer to
“DESIGNATION STRIPS”.
23" wide x 2.625" high panel with 14 black modules
installed. Two, full width Kwik® -Change designation
strips are included.
JPD322000
Same as JP322000, except holes pre-drilled for
mounting vertical designation strips at each side.
Mounting Screws: #6-32 P10725 for jack mounting and
#4-40 P2435 for insert mounting can also be ordered
separately. Contact Switchcraft.
Series JP312000, JPD312000, JP322000, JPD322000
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
®
( ")
TT-JAX .173 JACK PANELS 211
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") JACK PANELS SERIES 1600, A1600, B1600, C1600
SERIES 1600 and A1600
SERIES B1600 and C1600
Jack Panels with optional jacks.
(See next page for specific part numbers.)
Jack Panels with optional jacks.
(See next page for specific part numbers.)
SERIES 1700
Series B1700
Jack Panel
Jack Panel
with optional jacks.
(See next page for specific part numbers.)
with optional jacks.
(See next page for specific part numbers.)
Black thermoplastic UL 94V-0.
SERIES 1600 DOUBLE ROW JACK PANELS
Panel Insert: Thermoplastic polyester, UL 94V-0.
Marking Strip: White matte finish plastic.
Designation Strip Cover: Extruded clear plastic.
Black anodized panel has four inserts (24 single jacks). Double
row configuration accommodates 96 total jacks (48 pairs). Jack
spacing eliminates cross-patching of adjacent circuits when
twin plugs are used. Panel size: 1.75" x 19". Four, Kwik-
Change® designation strips for circuit identification supplied.
ORDERING
1. Part number tables list jack panels with the most commonly
used jack circuits. Custom jack panels can be built on
special order to OEM requirements. Typical special
order features are:
• Lamp jack with incandescent or LED lamps.
• Solder lug or wire-wrapping terminals.
• Pre-printed designation strips.
SERIES A1600 DOUBLE ROW JACK PANELS
Similar to Series 1600, except mounts 104 jacks. Jacks
are spaced on .312" centers for maximum jack density. Four,
Kwik-Change® designation strips supplied.
SERIES B1600 THREE ROW JACK PANELS
2.625" x 19" panel size yields high density (144 jacks). Jacks
are paired for single or twin plugs without cross-patching. Six,
Kwik-Change® designation strips supplied.
• TT-Switch® switches with wide switching selection.
2. Contact Switchcraft for all special order items.
SPECIFYING NOTE:
SERIES C1600 THREE ROW JACK PANELS
Similar to B1600, except maximum jack density (156 jacks).
Six, Kwik-Change® designation strips supplied.
Prefix letter “D” on part number indicates panels are drilled for
mounting vertical designation strips on both ends. EXAMPLE -
D1600, AD1632B, WCD1634B (vertical designation strips not
included). Order DS321 for 1.734" high panels; DS350 for
2.069" high panels. See “Designation Strips” section.
The most commonly-used combinations of panels and jacks
are listed on following page. 1600, A1600, B1600, C1600 panels
can be assembled with many different “bantam type” jacks.
SERIES 1700 TWIN ROW JACK PANELS
Standard 1.75" x 19" panel accepts 48 TT-Twin-Jax® jacks.
Two, Kwik-Change® designation strips supplied.
SERIES B1700 THREE ROW JACK PANELS
Accepts 48 Tri-Jax® with alternate mounting centers to
eliminate cross-patching between adjacent circuits. Panel size:
1.75" x 19". Two, Kwik-Change® designation strips supplied.
SPECIFICATIONS
Bussing type terminals which allow
you to buss jacks quickly and easily
are available on special order.
SERIES 1600, A1600, B1600, 1700, B1700
Panel and Designation Strip: Aluminum alloy, extruded.
Per QQ-A-200/8. Black anodized per MIL-A-8625C.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
®
"
( )
212 TT-JAX .173 JACK PANELS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") JACK PANELS – SERIES 1600, A1600, B1600, C1600
(continued)
Jack Data1
Panel Data
Jack Data
Panel Data
SERIES 1600 AND A1600
SERIES C1600
Part Number Part Number Quantity
Dimensions
Mount
Part Number Part Number Quantity
Dimensions
Mount
1600
w/o Jacks1
w/o Jacks1
TT32A
C1600
w/o Jacks1
w/o Jacks1
TT34B
D1600
CD1600
19"
x
1632A
C1634B
156
Standard
D1632A
1632B
TT32A
CD1634B
WC1634B
WCD1634B
TT34B
2.609"
TT32B
WTT34B
WTT34B
D1632B
W1632B
WD1632B
1634B
TT32B
96
Standard
19"
x
1.734"
WTT32B
WTT32B
TT34B
SERIES 1700
Part Number Part Number Quantity
Dimensions
Mount
1700
w/o Jacks4
w/o Jacks4
TT89
D1634B
W1634B
WD1634B
A1600
TT34B
D1700
1789
WTT34B
WTT34B
w/o Jacks1
w/o Jacks1
TT32B
19"
x
1.734"
48
Standard
Twin-Jax®
D1789
W1789
WD1789
TT89
WTT89
WTT89
AD1600
A1632B
AD1632B
A1634B
AD1634B
WA1634B
WAD1634B
TT32B
104
SERIES B1700
TT34B
TT34B
Part Number Part Number
Quantity
Dimensions
Mount
WTT34B
WTT34B
B1700
w/o Jacks5
w/o Jacks5
TT95
BD1700
B1795
BD1795
WB1795
WBD1795
B1796
TT95
SERIES B1600
19"
x
1.734"
WTT95
WTT95
TT96
48 Tri-Jax®
Standard
Part Number Part Number Quantity
Dimensions
Mount
B1600
w/o Jacks1
w/o Jacks1
TT32B
BD1600
B1632B
BD1632B
B1634B
BD1634B
WBD1634B
B1650
BD1796
WB1796
WBD1796
TT96
WTT96
WTT96
TT32B
TT34B
19"
x
2.609"
Standard
TT34B
144
PANEL INSERTS
WTT34B
Note 2
Part Number
TT505
Insert Description
For Panels
Without jacks, 24 holes
Blank
A1600, B1600
1600, B1600, C1600
1700
BD1650
WB1650
WBD1650
Note 2
◊TT506
◊TT507
◊TT508
◊TT509
◊TT511
Note 3
Without jacks, 48 holes
Blank
Note 3
1700
1. Accepts indicated number of single TT-Jax®, TT-Switches®,
TT-Lamp-Jax® or any combination.
2. Three-row panel assembly with 96 TT34B Jax (top 2 rows);
and 48 TT32B Jax (bottom row).
Without jacks, 26 holes
Without jacks, 72 holes
A1600, C1600
B1700
3. Same as Note 2 above, except jacks have wire-wrapping terminals.
4. Accepts 48 TT Twin-Jax®.
5. Accepts 48 TT Tri-Jax®.
◊ Special order only; contact Switchcraft.
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
®
"
( )
TT-JAX .173 JACK PANELS
213
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") JACK PANELS –SERIES 1600, A1600,
B1600, C1600 (continued)
Series 1600 & A1600
Series B1600 & C1600
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
®
"
( )
214 TT-JAX .173 JACK PANELS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") JACK PANELS – SERIES 1600, A1600,
B1600, C1600 (continued)
Series 1700
Series B1700
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
®
"
( )
MODULAR TT-JAX .173 PANELS
215
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MODULAR TT-JAX® (.173") PANELS - BLANK SERIES TT51, TT53, TT56, TT59
SERIES TT56
SERIES TT51
SERIES TT59
SERIES TT53
Ten series of blank panels are available in 19" and 23"
widths, standard or flush mounting, and double, twin or three
row configurations. OEM’s can order blank components and
individual modules, jacks, switches and lamp jacks for
production line assembly according to standard or special
front panel configurations. Kwik-Change® designation strips
are supplied with panels for custom legend marking.
Flush mounting styles can use extension legs (on special
order), for stand-off mounting from front of rack. Contact
Switchcraft for Mounting Bracket Kit K107.
Series
Number1
Description2
19" double row standard mount panel. Mounts 96 single
jacks on 24 modules.
19" three row standard mount panel. Mounts 48 Tri-Jax®
jacks on 24 modules.
23" three row standard mount panel. Mounts 56 Tri-Jax®
jacks on 28 modules.
TT51
TT53
TT54
TT55
TT56
TT58
TT59
TT60
TT61
TT62
19" double row flush mount panel. Mounts 96 single
jacks on 24 modules.
SPECIFICATIONS
Panel and Designation Mounting Strip: Aluminum alloy,
extruded per QQ-A-200/8. Black anodized per MIL-A-8265C.
Marking Strip: Matte finish white plastic.
23" double row flush mount panel. Mounts 112 single
jacks on 28 modules.
23" three row flush mount panel. Mounts 56 Tri-Jax®
jacks on 28 modules.
Designation Strip Cover: Extruded clear plastic.
SPECIFYING NOTE: Part numbers in table are for
blank panels only.
19" twin row standard mount panel. Mounts 48 TT
Twin-Jax® jacks on 24 modules.
ORDERING
23" twin row standard mount panel. Mounts 56 TT
Twin-Jax® jacks on 28 modules.
1. Order by part number from table
2. Refer to jack section to specify other jacks
and components.
19" twin row flush mount panel. Mounts 48 TT
Twin-Jax® jacks on 24 modules.
23" twin row flush mount panel. Mounts 56 TT
Twin-Jax® jacks on 28 modules.
◊ Special order only. Contact Switchcraft.
1. Prefix TTD for standard mounting panels indicates predrilled holes for
mounting “X Wide” vertical designation strips. See “Designation Strips” section.
2. Each panel includes integral designation mounting strip, marking strips
and clear plastic covers.
3. Contact Switchcraft for any special order items.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
216 TT MODULE INSERTS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT MODULE INSERTS – SERIES TT91, TT92 AND TT93
SERIES TT92
SERIES TT-93
SERIES TT91
TT91402
TT91202
TT91002
TT92402
TT92202
TT92002
TT93602
TT93302
TT93002
(black, 4 hole) (black, 2 hole) (black, blank) (black, 4 hole) (black, 2 hole) (black, blank) (black, 6 hole) (black, 3 hole) (black, blank)
Module colors are black or gray (standard); red, green, blue,
white and yellow available on special order. Each module has
a matte finish front surface and includes two mounting screws
(Switchcraft P2348).
SERIES TT91 (For Double Row Panels)
Color
Openings
2
4
Blank
SERIES TT91
Red
Black
Green
Blue
◊TT91401
◊TT91402
◊TT91403
◊TT91404
◊TT91405
◊TT91408
◊TT91411
◊TT91201
◊TT91202
◊TT91203
◊TT91204
◊TT91205
◊TT91208
TT91211
◊TT91001
◊TT91002
◊TT91003
◊TT91004
◊TT91005
◊TT91008
◊TT91011
Choice of blank, two- or four-hole modules for double row
panels Series TT51, TT55 and TT56. The following
components are used with Series TT91 modules:
1. Front mount TT-Jax® jacks.
White
Yellow
Gray
2. Front mount TT-Switch® switches Series TT300FM
and WTT420FM.
3. Front mount TT Lamp Jax® lamp jacks TT420FM
and WTT420FM.
SERIES TT92 (For Twin Row Panels)
SERIES TT92
Openings
2
Color
Blank, two- or four-hole modules for twin row panels Series
TT59, TT60, TT61 and TT62. TT Twin-Jax® jacks are used
with these modules.
4
Blank
Red
Black
Green
Blue
◊TT92401
◊TT92402
◊TT92403
◊TT92404
◊TT92405
◊TT92408
◊TT92411
◊TT92201
TT92202
◊TT92203
◊TT92204
◊TT92205
◊TT92208
TT92211
◊TT92001
◊TT92002
◊TT92003
◊TT92004
◊TT92005
◊TT92008
◊TT92011
SERIES TT93
Blank, three- or six-hole modules for three row panels
Series TT53, TT54, TT57 and TT58. Tri-Jax® jacks are
used with these modules.
White
Yellow
Gray
SPECIFICATIONS
Module: Precision molded thermosetting plastic in colors.
Mounting Screws: Black zinc, #3-48 x .312" flat head
machine screws.
SERIES TT93 (For Three Row Panels)
ORDERING
1. Order by part number from tables.
2. Contact Switchcraft for any special order items.
Color
Openings
2
4
Blank
Red
Black
Green
Blue
TT93601
TT93602
TT93603
TT93604
TT93605
TT93608
TT93611
◊TT93301
TT93302
◊TT93303
◊TT93304
◊TT93305
◊TT93308
TT93311
TT93001
TT93002
TT93003
TT93004
TT93005
TT93008
TT93011
SPECIFYING NOTE: The part numbers listed on this
page are for modules only. Refer to following page for
specifying panel assemblies with components installed.
White
Yellow
Gray
◊ Special order only; contact factory for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
®
"
( )
MODULAR TT-JAX .173 JACK PANELS 217
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MODULAR TT-JAX® (.173") JACK PANELS –
SERIES TT5102000, TT5202000, TT5502000, TT5602000
Series TT5102000,
TT5202000 (Typical)
Series TT5502000,
TT5602000 (Typical)
Shown w/mounting bracket K107
(not supplied).
SERIES TT5102000*
Jack Data
Panel Data
Modular double row, 1.75" high x 19" wide, standard mount.
Supplied with 24 black modules, designation strips, and
covers. Mounts 96 TT-Jax® single jacks, lamp jacks and/or
switches.
Part Number
Qty. Width Mount Modules
Part Number
TT5102000
◊TT5102S31
◊TT5102W31
TT5102S32A
TT5102W32A
TT5102S32B2
TT5102W32B
◊TT5102S33B
◊TT5102W33B
TT5102S34B2
TT5102W34B
TTD5102000
TTD5102S31
Through
0
without jacks
TT31FM
WTT31FM
TT32AFM
SERIES TT51020001*
Modular double row, 1.75" high x 19" wide, standard mount.
Supplied with 24 black modules, designation strips, and
covers. Mounts 96 TT-Jax® single jacks, lamp jacks and/or
switches. Comes supplied with cable tie bar.
WTT32AFM
TT32BFM
96
19"
Stan-
dard
24
(Black)
WTT32BFM
TT33BFM
SERIES TT5202000*
WTT33BFM
TT34BFM
Similar to TT5102000, except 23" wide. Supplied with 28
black modules, designation strips, and covers. Mounts 112
TT-Jax® single jacks, jack lamps and/or switches.
WTT34BFM
without jacks
0
SERIES TT5502000
Modular double row, 1.75" high x 19" wide, flush mount.
Supplied with 24 black modules, designation strips, and
covers. Panels can be mounted flush with rack/control panel
surface, or use with extension legs for standoff mounting with
easy access to rear of jacks for testing/monitoring. Mounts
96 TT-Jax® single jacks, lamp jacks and/or switches.
Note1
without jacks
Note1
96
TTD5102W34B
TT5202000
TTD5202000
TT5202S31
Through
0
SERIES TT5602000
Stan-
dard
28
(Black)
TT5202W34B
TTD520231
Through
Similar to TT5502000, except 23" wide. Supplied with 28
black modules, designation strips, and covers. Mounts 112
TT-Jax® single jacks, jack lamps and/or switches.
112
23"
Note1
without jacks
Note1
TTD5202W34B
TT552000
ORDERING
1. Order part number from table
2. Contact Switchcraft for any special order items.
3. Separate components can be ordered.
* Prefix TTD indicates panel is pre-drilled with countersunk
holes for mounting “X-Wide” vertical designation strips.
See “DESIGNATION STRIPS” section.
0
96
0
TT5502S31
Through
24
(Black)
19"
23"
Flush
Flush
TT5502W34B
TT5602000
TT5602S31
Through
without jacks
Note1
28
(Black)
112
TT5602W34B
◊ Special order only; contact Switchcraft for price and delivery.
1 Complete panel part number with jacks installed can be constructed as
shown for Series TT51.
2. Add a “1” to part number to specify cable tie bar.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
218 MODULAR TT-JAX .173 JACK PANELS
®
"
( )
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MODULAR TT-JAX® (.173") JACK PANELS –
SERIES TT5102000, TT5202000,
TT5502000, TT56020000 (continued)
Series TT51-02000, TT52-02000 (Typical)
Series TT55-02000, TT56-02000 (Typical)
Jack Panel Dimensions - inch (mm)
Series
Number
TT51
◊TT52
TT55
A
B
C
D
-
-
19 (482.6)
23 (584.2)
19 (482.6)
23 (584.2)
18.3 (465.1) 1.013 (25.7)
22.3 (566.7) 1.648 (41.9)
18.3 (465.1) 1.013 (25.7)
17.125 (435)
TT56
22.3 (566.7) 1.648 (41.9) 21.125 (536.6)
◊ Special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
TT-JAX .173 TWIN ROW AND THREE ROW JACK PANELS 219
®
"
( )
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") TWIN ROW AND THREE ROW JACK PANELS
Series TT5902000
Jack Data
Panel Data
Series TT6102000
Part Number
Qty. Width Mount Modules
Part Number
TT5902000
TT5902S89
TT5902W89
TTD5902000
TTD5902S89
TTD5902W89
TT6002000
TTD6002000
TT6002S89
TT6002W89
TTD6002S89
TTD6002W89
TT6102000
TT6102S89
TT6102W89
TT6202000
TT6202S89
TT6202W89
TT5302000
◊TT5302S95
TT5302W95
◊TT5302S96
TT5302W96
TTD5302000
TTD5302S95
Through
0
without jacks
TT89FM
48
WTT89FM
without jacks
TT89FM
19"
0
Series TT5302000, TT5402000 (Typical)
48
WTT89FM
Stan-
dard
24
(Black)
0
without jacks
Note1
SERIES TT5902000*
Modular twin row, 1.75" high x 19" wide, standard mount.
Supplied with 24 black modules, designation strips, and
covers. Mounts 48 TT Twin-Jax® twin jacks.
56
23"
Note1
None
56
0
SERIES TT6002000*
Similar to TT5902000, except 23" wide. Supplied with 28
black modules, designation strips, and covers. Mounts 56 TT
Twin-Jax® twin jacks.
19"
23"
Note1
48
0
Flush
28
(Black)
without jacks
Note1
SERIES TT6102000
56
0
Modular twin row, 1.75" high x 19" wide, flush or standoff
mount. Supplied with 24 black modules, designation strips,
and covers. Mounts 48 TT Twin-Jax® twin jacks.
without jacks
TT95FM
SERIES TT6202000
WTT95FM
TT96FM
48
Similar to TT6102000, except 23" wide. Supplied with 28
black modules, designation strips, and covers. Mounts 56 TT
Twin-Jax® twin jacks.
19"
Stan-
dard
24
(Black)
WTT96FM
without jacks
0
SERIES TT5302000*
Note2
Modular three row, 1.75" high x 19" wide, standard mount.
Supplied with 24 black modules, designation strips, and
covers. Designed for LINE, EQUIP and MONITOR patch
connections. Mounts 48 Tri-Jax® triple jacks.
48
TTD5302W96
TT5402000
TTD5402000
TT5402S95
Through
0
without jacks
Note2
SERIES TT5402000*
Similar to TT5302000, except 23" wide. Supplied with
28 black modules, designation strips, and covers. Mounts 56
Tri-Jax® triple jacks.
TT5402W96
TTD5402S95
Through
56
23"
Stan-
dard
28
(Black)
Note2
SERIES TT5702000
TTD5402W96
TT5702000
TT5702S95
Through
Modular three row, 1.75" high x 19" wide, flush or standoff
mount. Supplied with 24 black modules, designation strips,
and covers. Mounts 48 Tri-Jax® triple jacks.
without jacks
Note2
0
48
19"
23"
Flush
Flush
24
(Black)
SERIES TT5802000
TT5702W96
TT5802000
TT5802S95
Through
Similar to TT5702000, except 23" wide. Supplied with
28 black modules, designation strips, and covers. Mounts
56 Tri-Jax® triple jacks.
without jacks
Note2
0
56
28
(Black)
ORDERING
TT5802W96
1. Order part number from table
◊ Special order only; contact Switchcraft for price and delivery.
1. Complete panel part number with jacks installed can be constructed as
shown for Series TT59 or TTD59.
2. Complete panel part number with jacks installed can be constructed as
shown for series TT53.
2. Contact Switchcraft for any special order items.
*Prefix TTD indicates panel is pre-drilled with countersunk
holes for mounting “X-Wide” vertical designation strips.
See “DESIGNATION STRIPS” section.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
®
"
( )
220 TT-JAX .173 TWIN ROW AND THREE ROW JACK PANELS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") TWIN ROW AND THREE ROW JACK PANELS (continued)
Series TT5902000 and
TT6002000 (Typical)
Jack Panel Dimensions - inch (mm)
Series
Number
TT59
TT60
TT61
TT62
A
B
C
D
-
-
19 (482.6)
23 (584.2)
19 (482.6)
23 (584.2)
18.3 (465.1) 1.013 (25.7)
22.3 (566.7) 1.648 (41.9)
22.3 (566.7) 1.013 (25.7)
17.125 (435)
22.3 (566.7) 1.648 (41.9) 21.125 (536.6)
Series TT6102000 and
TT6202000 (Typical)
Series TT5302000 and
TT5402000 (Typical)
Jack Panel Dimensions - inch (mm)
Series
Number
TT53
TT54
TT57
A
B
C
D
-
-
19 (482.6)
23 (584.2)
19 (482.6)
23 (584.2)
18.3 (465.1) 1.013 (25.7)
22.3 (566.7) 1.648 (41.9)
22.3 (566.7) 1.013 (25.7) 17.125 (435)
22.3 (566.7) 1.648 (41.9) 21.125 (536.6)
◊TT58
Series TT5702000 and
TT5802000 (Typical)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
TT-JAX .173 CONNECTORIZED JACKFIELDS 221
®
"
( )
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") CONNECTORIZED JACKFIELDS –
SERIES TT, 2-WIRE, 4-WIRE, 6-WIRE
2-wire TT-Connectorized Jackfield
TT2W48VCF1
6-wire TT-Connectorized Jackfield
4-wire TT-Connectorized Jackfield
TT4W24MCF1
2-WIRE TT-CONNECTORIZED JACKFIELDS, SERIES TT
Contains 48, 2-wire circuits. Arrangements include:
LINE-DROP or Signal E/M, or LINE-DROP-MON. Available
with MONITOR jack row. On rear panel, LINE connectors are
receptacles and DROP connectors are plugs. LINE and DROP
circuits may be isolated from each other for separate monitoring.
On special order, 48 circuits LINE/COMBINATION DROP/MON
or 96 circuits, LINE/DROP or Signal E/M may be specified.
6-WIRE TT-CONNECTORIZED JACKFIELDS,
SERIES TT
6-Wire jackfields contain 48, 6-wire circuits for MOD-DEM/EQ
IN EQ OUT/MON/SIG LINE/SIG EQ patching with toll test
boards. Available with or without MONITOR jack row. On rear
panel, MOD, EQ IN and SIG LINE connectors are receptacles
and DEM, EQ OUT and SIG EQ connectors are plugs. The
following can be specified on special order: 12 circuits,
DEM-MOD/EQ IN-EQ OUT/MON/SIG E/M; 48 circuits, signal
E/M leads separated; 48 circuits for D3 channel banks.
2-WIRE TT-CONNECTORIZED PC JACKFIELD,
SERIES TTPC
ORDERING
Same as 2-Wire TT-connectorized jackfields above, except all
connections are machine-soldered on a double-sided PC 1. Order by part number from tables.
board instead of hand wired.
2. Contact Switchcraft for any special order items.
4-WIRE TT-CONNECTORIZED JACKFIELDS,
SERIES TT
4-Wire jackfields have 24, 4-wire circuits for MOD-DEM/EQ
IN-EQ OUT/MON patching, or may be used for other 4-wire
patching applications. Can be supplied with or without
MONITOR jack row. On rear panel, MOD AND EQ IN
connectors are receptacles and DEM and EQ OUT
connectors are plugs.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
®
"
( )
222 TT-JAX .173 CONNECTORIZED JACKFIELDS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") CONNECTORIZED JACKFIELDS –
SERIES TT, 2-WIRE, 4-WIRE, 6-WIRE (continued)
Back Frames: Cold rolled steel, zinc-plated with iridescent
tarnish-resistant finish.
Screws, Nuts and Lockwashers: Steel, clear iridite
tarnish-resistant finish over zinc-plating.
Connectors: 50-pin micro/pierce plugs and receptacles.
Cable Tie Bar: Aluminum hexagon alloy. 6061-T6, clear iridite
finish per MIL-C-5541 (not hinged versions only).
Cables: 25 pair, 24 AWG solid copper wire, tinned and
annealed, covered with insulating grade thermoplastic jacket.
Cable Ties: Thermoplastic, locking-non-releaseable,
30 pounds minimum loop tensile strength.
SPECIFICATIONS
Panel and Integral Designation Strip: Aluminum alloy,
extruded per QQ-A-200/8. Black anodized per MIL-A-8265.
Modules: Precision-molded thermosetting plastic. Black
standard. Other colors on special order.
Mounting Screws: Black zinc, #3-48 x 312" flat head
machine screw.
TT-Jax® Jacks: See jacks section for TT-Jax® specifications.
Marking Strip: Matte finish white plastic.
Vertical Designation Strip: Extruded aluminum, black
anodized.
2- & 4-Wire Connectorized Jackfields
(4-Wire Style Shown)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
®
"
( )
TT-JAX .173 CONNECTORIZED JACKFIELDS – PART NUMBERS
223
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") CONNECTORIZED JACKFIELDS (continued)
PART NUMBERS
1. Compose part numbers from data below to specify your
jackfield...or use the table to order popular jackfields.
SPECIFYING NOTE: Any jackfield can be manufactured
with AMP CHAMP connectors. Contact Switchcraft.
2
4
V
C
F
1
T
T
2 W
UNIT TYPE
NUMBER OF
CIRCUITS
RACK MOUNTING
1 - 19 inch
JACK TYPE
TT - .173"
JP - LONG FRAME (1/4")
2W - 2 WIRE
4W - 4 WIRE
6W - 6 WIRE
12
24
48
96
2 - 23 inch
TYPE OF HINGE
F - FRONT PANEL HINGED
R - REAR PANEL HINGED
N - NON-HINGED
MONITOR JACK
V - WITHOUT
M - WITH
WIRE TERMINATION
C - AMPHENOL BLUE RIBBON
B - AMP CHAMP
W - TERMINAL BLOCK
TYPICAL PART NUMBERS
2-WIRE JACKFIELDS
Part Number
Description
TT2W48VCF1
TT2W48VCN1
TT2W48MCF1
TT2W48MCN1
Hinged front panel.
Front panel NOT hinged.
Same as TT2W48VCF1, except with MONITOR jack row.
Same as TT2W48VCN1, except with MONITOR jack row.
4-WIRE JACKFIELDS
Part Number
Description
TT4W24MCF1
TT4W24MCN1
TT4W24VCF1
TT4W24VCN1
Hinged front panel with MONITOR jack row.
Front panel NOT hinged with MONITOR jack row.
Same as TT4W24MCF1, except no MONITOR jack row.
Same as TT4W24MCN1, except no MONITOR jack row.
6-WIRE JACKFIELDS
Part Number
TT6W48MCF1
16J1055
TT6W48MCN1
TT6W48VCF1
TT6W48VCN1
Description
Hinged front panel with MONITOR jack row.
Hinged front panel with MONITOR jack row.
Front panel NOT hinged with MONITOR jack row.
Same as TT6W48MCF1, except no MONITOR jack row.
Same as TT6W48MCN1, except no MONITOR jack row.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
®
"
( )
224 TT-JAX .173 CONNECTORIZED JACKFIELDS SCHEMATICS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") CONNECTORIZED JACKFIELDS (continued)
TYPICAL CIRCUIT ARRANGEMENTS - 2-WIRE
TYPICAL CIRCUIT ARRANGEMENTS - 4-WIRE
TYPICAL CIRCUIT ARRANGEMENTS - 6-WIRE
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
®
"
( )
TT-JAX .173 CONNECTORIZED JACKFIELDS SCHEMATICS
225
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
®
TT-JAX (.173") CONNECTORIZED JACKFIELDS (continued)
No. TT2W48VCF1 (hinged)
No. TT2W48VCN1 (not hinged)
(Hinged version shown)
TYPICAL CIRCUIT ARRANGEMENT
No. TT2W48MCF1 (hinged)
No. TT2W48MCN1 (not hinged)
(Non-Hinged version shown)
TYPICAL CIRCUIT ARRANGEMENT
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
®
"
( )
226 TT-JAX .173 CONNECTORIZED JACKFIELDS SCHEMATICS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") CONNECTORIZED JACKFIELDS (continued)
No. TT4W24VCF1 (hinged)
No. TT4W24VCN1 (not hinged)
(Hinged version shown)
TYPICAL CIRCUIT ARRANGEMENT
No. TT4W24MCF1 (hinged)
No. TT4W24MCN1 (not hinged)
(Non-Hinged version shown)
TYPICAL CIRCUIT ARRANGEMENT
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
TT-JAX .173 CONNECTORIZED JACKFIELDS SCHEMATICS 227
®
"
( )
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
®
TT-JAX (.173") CONNECTORIZED JACKFIELDS (continued)
No. TT6W48MCF1 (hinged)
No. TT6W48MCN1 (not hinged)
(Hinged version shown)
No. TT6W48VCF1 (hinged)
No. TT6W48VCN1 (not hinged)
TYPICAL CIRCUIT ARRANGEMENT
No. TT6W48MCF1 (hinged)
No. TT6W48MCN1 (not hinged)
(with Monitor Jacks)
No. TT6W48VCF1 (hinged)
No. TT6W48VCN1 (not hinged)
(no Monitor Jacks)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
®
"
( )
228 TT-JAX .173 CONNECTORIZED JACKFIELDS SCHEMATICS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT-JAX® (.173") CONNECTORIZED JACKFIELDS
REAR VIEW —ROTATED
No. 16J-1055
TYPICAL CIRCUIT ARRANGEMENTS
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
TT-JAX® (.173”) CONNECTORIZED JACKFIELDS 229
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT-Jax® (.173") CONNECTORIZED JACKFIELDS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
TT® LAMPS AND JEWEL ASSEMBLIES
230
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TT® LAMPS AND JEWEL ASSEMBLIES
Steady “On” Lamp
Series TT450
Blinking/Steady
“On” Lamp
SCHEMAT
SERIES TT-450 LAMPS
Red LED and series dropping resistor are molded into
compact cartridge with bi-pin terminals for use with TT
Lamp-Jax® lamp jacks. Colored bezels are molded in for color
coding of functions; colors are black, red, green, white and
yellow. On special order, blue or other colors are available.
TT-LED Lamps
Installed
Standard voltages are 6, 24 and 48 V (DC only). No tools are
required for lamping/relamping. Simply slip TT-LED into lamp
jack with (+) terminal up. If it doesn’t light, remove it, rotate it
180°, and reinsert it into jack.
FLASHING/STEADY ON LEDS
Yellow, green and red LEDs are 2-pin cartridge plug-ins which
operate from a 48 VDC supply. When 48 V is applied, LED
flashes for 30 seconds, then changes to steady “On” condition.
SPECIFICATIONS
SPECIFICATIONS
Body: Thermoplastic, UL 94V-0 rated.
LED Colors: Yellow, green or red.
Housing: Molded black plastic.
Bezel: Molded plastic in colors.
LED: Red illumination.
Pins: T-1 3/4 bi-pin configuration.
Part Number
15J9068
Description
Red flashing/continuous
Yellow flashing/continuous
Green flashing/continuous
Amber flashing/continuous
Part
Number
Bezel
Voltage Color
Part
Number
Bezel
Voltage Color
6
15J9076
ed
15J9077
TT
4
5
1
0
6
6
24
◊
T
T
45406
R
Blue
White
Yellow
TT45124
◊TT45424
24
48
6
24
48
6
15J9078
TT45148
TT45206
TT45224
TT45248
TT45306
TT45324
TT45348
48
6
◊TT45448
TT45506
TT45524
TT45548
TT45806
TT45824
TT45848
TT-JEWEL ASSEMBLY
Black
24
48
6
24
48
Green
24
48
ORDERING
1. Order by part number from table.
2. For special order items, such as other LED colors,
Panel with TT-Jewel Assemblies
and TT-Switches installed
voltages, lamps with 25% reduced power consumption,
etc., contact Switchcraft.
Jewel assemblies use bi-pin lamp and act as lighted jewel and
lamping/relamping tool. Simply slip bi-pin lamp in brass collar
and insert lamp with pins in vertical plane. Lamp automatically
seats properly. Jewel is molded plastic in colors; sleeve is brass.
Part Number
TT401
TT403
Color
Red
Green
Blue
Part Number
TT408
Color
Yellow
Amber
Black*
TT413
TT510
TT404
TT405
White
*Used as hole plug where
no jack is installed.
Series TT-450 TT-LED Lamps
LAMPS
Part Number
P2290
Description
6.3 V, GE No. 7377.
P2315
P2316
P2456
6.3 V, GE No. 7381. Avg. life: 50K hrs. @ 200 mA.
28 V, GE No. 7387. Avg. life: 25K hrs. @ 40 mA.
24 V, GE No. 7001.
Flashing/Steady “On” Lamps
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
LONGFRAME SWITCHBOARD SWITCHES 231
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
LONGFRAME SWITCHBOARD SWITCHES
SERIES 11000 and 11200
Premium quality, long frame switches, designed especially for
jack panel mounted switching. Standard actuations are
push-lock/pull-release, 2-position turn button and 3 position turn
button. Many contact forms available. Mounts in Switchcraft
Jack Panels Series 1200, 1400, 2400, 2600, 2800, modular JP®
jack panels, and other standard telephone jack panels. Part
numbers in table indicate “A” frame. For same switch with “C”
frame, add prefix “C” to part number. Many circuit forms not
shown in tables are available on special order. Long leaf springs
have no forms at point of flexing, which insures long life. Welded
crossbar palladium contacts rated at 2A 200W maximum are
standard. Fine silver (for higher currents) or gold alloy (dry circuit
to 1A) contacts are available on special order. Contact Switchcraft.
W11012L
11206L
Part Numbers
Locking Momentary
Circuit
PUSHBUTTONS - SERIES 11000
◊11001L
◊11002L
11003L
◊11001
◊11002
11003
◊W11003
◊11003D
◊11004
◊11005
11006
◊W11006
◊11006D
◊11008
◊11009
11012
1-A
1-B
SPECIFICATIONS
Frame, Screws and Twin Nut: Steel, plated.
Springs, Pressure Plate and Terminals: Copper alloy.
Solder lugs are tin-dipped.
Contacts: Welded crossbar palladium are standard. Fine sil-
ver or gold alloy are available on special order.
Insulation: Rigid plastic. Extruded plastic tubing through
stack.
1-C
◊W11003L
◊11003DL
◊11004L
◊11005L
11006L
◊W11006L
◊11006DL
◊11008L
◊11009L
◊11012L
◊W11012L
1-D
2-A
2-B
2-C
2-D
4-A
3-C
Knob: Molded black plastic. Turn-key type faced with white
arrow.
Bushing: Copper alloy, nickel-plated.
4-C
◊W11012
ORDERING
1. Order by part number from table.
2. For special order items, contact Switchcraft.
TURN BUTTONS - SERIES 11200
◊11201L
◊11202L
11203L
◊11201
◊11202
11203
◊W11203
◊11203D
◊11204
◊11205
11206
◊W11206
◊11206D
◊11208
◊11209
11212
1-A
1-B
1-C
◊W11203L
◊11203DL
◊11204L
◊11205L
11206L
◊W11206L
◊11206DL
◊11208L
◊11209L
◊11212L
◊W11212L
1-D
2-A
2-B
2-C
2-D
4-A
3-C
4-C
◊W11212
◊ Special order only; contact Switchcraft.
Mounting Screws: #6-32, P10725, can be ordered separately.
Contact Switchcraft. (Screws not supplied with switches.)
“T-Switch” Switches
A
B
C
D
E
F
Basic Schematic Circuits
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
232
DUMMY PLUGS AND HOLE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
DUMMY PLUGS AND HOLE PLUGS
491
492
493
When inserted into a standard size telephone jack, the dummy
plug actuates springs like a normal plug, except no signal is
conducted through since the plug is made of non-conducting
plastic. Dummy plugs can also be used to plug-up unused jacks
to prevent accidental insertion of an incorrect plug.
Description
Interchangeable
with
Part
Number
Conductors
Color
Red
WEco
–
Trimm
–
49101
49102
49105
49201
49202
49205
49301
49302
49305
3
3
3
3
3
3
2
2
2
Black
White
Red
Black
White
Red
–
–
–
–
SERIES 491: 3-conductor with .206" diameter finger. Mates
with MT342B and MT344B MT-Jax®, Series M Hi-D Jax®, and
other standard telephone jacks having .21" inside diameter
sleeves.
258F
258C
258E
165F
165C
165E
558D
558C
558E
556D
556C
–
Black
White
SERIES 492: 3-conductor with .25" diameter finger. Mates with
3-conductor MT-Jax® and Series M Hi-D Jax®, and other
standard telephone jacks have .25" inside diameter sleeves.
SERIES 493: 2-conductor with .25" diameter finger. Mates with
2-conductor MT-Jax®, Series M Hi-D Jax®, and other standard
telephone jacks having .25" inside diameter sleeves.
No. 491
No. 492
No. 493
PLASTIC HOLE PLUG
Hole Plug P1801
Used to seal off unused holes in jack
panels, Series 1200, 1400, 2400, 2600
and JP012000 through JP122000.
Constructed of dimensionally stable
molded black plastic.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
®
(
)
TT BANTAM CIRCUIT GUARD PLUGS 233
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT® (BANTAM) CIRCUIT GUARD PLUGS
APPLICATION
Circuit guard plugs snap into TT-Jax® (bantam)
jacks eliminating accidental or unauthorized
insertion of a plug into a critical circuit. The circuit
guards plugs do not actuate the jack springs.
These plugs seal the jack bushing and provide
an additional means of circuit identification.
Circuit guard plugs are available in three
different designs: Series TT512, Series TT513
and Series TT514. All three designs are molded
thermoplastic and are available in the following
colors: red, black, green, blue, white or yellow.
Base
SERIES TT512
TT512 circuit guard plugs cover an individual
jack opening and insert to an virtually flush
position with the front panel.
Marking Strip
Cover
Series
514
SERIES TT513
TT513 circuit guard plugs are similar to the
Series TT512 except the button extends
.219" from the front of the panel for easier
removal.
Series TT512
Series TT513
SERIES TT514
TT514 circuit guard plugs cover both the IN and
OUT jacks of two adjoining circuits while leaving
the monitor jacks exposed for circuit testing.
The four jack circuit guard plugs also include a
matte finish white plastic marking strip and
a clear extruded plastic window for additional
designation.
Part Number
TT5121
TT5122
TT5123
TT5124
Part Number
TT5131
Part Number
TT5141*
TT5142*
TT5143*
TT5144*
TT5145*
TT5148*
Color
Red
Black
Green
Blue
TT5132
TT5133
TT5134
TT5135
TT5125
TT5128
White
Yellow
TT5138
*Includes base, marking strip & cover.
SPECIFICATIONS
TT512 and TT513: Molded thermoplastic in colors.
TT514: Base: Molded thermoplastic in colors.
Marking Strip: Matte finish white plastic.
Cover: Clear extruded plastic.
ORDERING
1. Order by part number from table.
2. Contact Switchcraft for any special order items.
Series TT-512
Series TT-513
Series TT-514
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
234 MINIATURE, DUMMY PLUGS, HOLE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MINIATURE, DUMMY PLUGS, HOLE PLUGS
TT5152 or TT206
TT203
TT-Terminating
Plug
TT510
Hole
Plug
TT205
TT-Dummy
Plug
TT515
TT-Dummy
Plugs
TT207 TT-Twin
Looping Plug
TT210
ORDERING
1. Order by part number from table.
2. Contact Switchcraft for any special order items.
Terminating, dummy and looping plugs are designed for
use with Tini-Telephone® Jacks. TT-Phone Plugs are also
recommended for use on other miniature telephone jacks
with same bushing inside diameter and compatible tip
and/or ring spring configurations.
SPECIFICATIONS
Series TT200 Tip Rod, Ring and Sleeve:
Brass per QQ-B-626.
TT-TERMINATING PLUGS
TT-Phone Plug terminating plugs are used to terminate a
circuit with a specific resistive load. A precision 1/2 watt, ± 1%
resistor is molded into the handle of each terminating plug.
See “PLUG SCHEMATICS” for resistor wiring. Resistance
value is marked on plug handle. Other resistance values are
available on special order.
Handle: Molded PVC, ivory or black.
Series TT515: Molded of dimensionally stable plastic
in black, red or white.
Part No.
◊TT201
◊TT202
TT203
Description
2-conductor terminating-135Ω
2-conductor terminating-600Ω
3-conductor terminating-135Ω
3-conductor terminating-600Ω
2-conductor dummy
Schematic Color
1
1
2
2
5
6
3
4
5
6
–
–
–
–
Gray
Gray
Gray
Gray
Gray
Gray
Gray
Gray
Ivory
Ivory
Black
Red
TT-DUMMY PLUGS
TT-Phone Plug dummy plugs are designed to be inserted into
phone jacks to actuate shunt and isolated switching circuits.
TT204
TT205
TT-LOOPING PLUGS
TT-Phone Plug looping plugs are used to loop or patch
adjacent jack circuits. See “PLUG SCHEMATICS” for wiring.
TT206
3-conductor dummy
◊TT207
TT208
TT209
TT210
TT510
2-conductor twin looping
3-conductor twin looping
2-conductor twin dummy
3-conductor twin dummy
Hole Plug
TT-HOLE PLUG
TT-Hole Plugs are used to close off unused openings in all
Switchcraft TT-Jack Panels. Molded of black plastic with brass
sleeve.
TT5151
TT5152
TT5155
2- or 3-conductor dummy
2- or 3-conductor dummy
2- or 3-conductor dummy
Black
White
◊ Special order only; contact Switchcraft for price and delivery.
Plug Schematics
1
2
3
4
5
6
Nos. TT-201, TT-202, TT-205
Nos. TT-207, TT-209
Nos. TT-515-1, -2
Nos. TT-203, TT-204, TT-206
Nos. TT-208, TT-210
Nos. TT-510
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
DESTINATION STRIPS 235
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
DESIGNATION STRIPS
Designation strips with protective covers are supplied with all
tini-telephone® jack panels, jackfields and certain standard
jack panels. Replacement kits and individual parts are also
available. Legends can be marked in pencil, ink, or lettering
transfers. Kwik-Change® is the name of all horizontal strips.
See illustration.
Three types of designation strips are available as accessories:
1. Kwik-Change single height.
2. Kwik-Change double height.
3. X-Wide vertical.
KWIK-CHANGE® DESIGNATION STRIPS
(SINGLE HEIGHT)
Two types of single height designation strips are available:
1. SERIES 1600, A1600, B1600, C1600, 1700, B1700,
1400300, 2600300, JP012000 through JP122000
• Extruded aluminum mounting strip
• Four mounting screws
• Marking strips
• Clear plastic strip covers
Kwik-Change Designation Strip
Kit Number DS301 (single height)
Mounting strips are fastened with four mounting screws
provided. Marking strip slides into the clear plastic cover, and
cover is snapped into place on the mounting strip. Legends
can be marked in pencil, ink, lettering transfers, typewriter, etc.
SPECIFICATIONS
(Used on panels 1600, A1600, B1600, C1600, 1700, B1700)
Mounting Strip: Extruded aluminum black anodized
Cover: Clear extruded plastic.
Marking Strip: White matte finish plastic.
Screws: Copper alloy, plated.
(Used on panels 1400300, 1600300)
Mounting Strip: Aluminum alloy, extruded, black anodized.
Cover: Clear extruded plastic.
Kwik-Change Designation Strip
Kit Number DS318 (single height)
Marking Strip: White matte finish plastic.
Screws: Steel, plated.
SERIES TT51 through TT62, TT-Connectorized (2-, 4- and
6-Wire), JP012000 through JP122000, TTPC and DSX
panels. Mounting strips are extruded as part of the panel.
Otherwise, use is the same as above.
ORDERING
Order by part number from table.
Kwik-Change Designation Strip
Kit Number TT501 (single height)
Kwik-Change Designation Strip
Kit Number TT516 (single height)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
236
DESIGNATION STRIPS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
DESIGNATION STRIPS (continued)
SINGLE HEIGHT DESIGNATION STRIPS
Part No.
TT501
Description
For Panels
Part No.
DS301
Description
For Panels
Kits (single height) includes:
1-mounting strip (8.375" long)
1-cover
1600, 1700
(Alternate
spacing)
Kit (single height) includes:
1-mounting strip (17" long)
1-cover
1400301,
2600301
1-marking strip sheet
(5 strips per sheet)
4-mounting screws
1-marking strip sheet
(5 strips per sheet)
4-mounting screws
TT502
TT503
TT504
Marking Strip sheet (used with
Kit TT501 & TT521)
–
–
DS302
DS303
Cover (used with Kit DS301)
–
Marking strip sheet (used with
Kit DS301 and DS316).
Cover (used with Kit
TT501 and TT504)
–
–
DS306
DS307
Marking strip sheet (used with
Kit DS307 and DS308).
Kits (single height) includes:
1-mounting strip (8.375" long)
1-cover
1-marking strip sheet
(5 strips per sheet)
4-mounting screws
A1600, C1600
(Continuous
spacing)
Kit (single height) includes:
2-covers (16.5" long)
1-marking strip sheet
(5 strips per sheet)
JP012000,
JP032000,
JP052000
DS308
DS316
Kit (single height) includes:
2-covers (19.5" long)
1-marking strip sheet
(5 strips per sheet)
JP022000,
JP042000,
JP062000
TT519
Kit (single height) includes:
2-covers (9.61" long)
1- marking strip sheet
(5 strips per sheet)
TT52, TT54
TT56, TT58
TT60, TT62
(23" Panels)
Kit (single height) includes:
2-covers (16.25" long)
1- marking strip sheet
(5 strips per sheet)
JP072000
JP092000,
JP112000
TT520
TT521
Marking strip sheet (used with
Kit TT519)
–
Kit (single height) includes:
2-covers (8.25" long)
1- marking strip sheet
(5 strips per sheet)
TT51, TT53
TT55, TT57
TT59, TT61,
Connectorized
Jackfields
DS317
DS318
Marking strip sheet (used with
Kit DS318).
–
Kit (single height) includes:
2-covers (20" long)
1- marking strip sheet
(5 strips per sheet)
JP082000
JP102000,
JP122000
(2-, 4- and 6 wire)
KWIK-CHANGE® DESIGNATION STRIPS
(DOUBLE HEIGHT)
Double height strips allow larger legends. Can be factory
installed on Series 1600, B1600, 1700 and B1700 panels, or
may be ordered separately for customer installation.
• Series 1600/B1600: Four strips can be mounted, two
above each row of jack openings.
Single Height Kwik-Change®
Designation Strip, TT501
Series B1600
• Series 1700: Two strips can be mounted, two above or
two below (special order) the double row of jack openings.
• Series B1700: Two strips can be mounted (side-by-side)
above top row of jacks.
NOTE: When TT516 kits are mounted above top row of jacks on
Series 1600, B1600 and B1700, strips will overhang top edge
of panel by .156 inches For most applications, the strips help
seal the normal opening between adjacent panels. Series
B1700 panel mounting screws may have to be loosened to
facilitate removal of the panel above it in this type of installation.
Double Height Kwik-
Change Designation
Strip, TT516
SPECIFICATIONS
Mounting Strip: Black thermoplastic UL 94V-0.
Series 1700
Cover: Clear plastic.
Marking Strip: Matte finish white plastic.
Mounting Screws: Copper alloy, plated.
ORDERING
1. Order by part number from table.
2. To order double height strips installed on panels,
contact Switchcraft.
Series B1700
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
JACK PANELS
KWIK-CHARGE® DESIGNATION STRIPS – DOUBLE HEIGHT 237
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
®
KWIK-CHANGE DESIGNATION STRIPS (DOUBLE HEIGHT)
Kwik-Change® Designation Strip
DS311 (double height)
DOUBLE HEIGHT DESIGNATION STRIPS
Part No.
DS311
Description
Kit (double height) includes:
1-mounting strip (17" long)
1-cover
For Panels
2600310,
1400315
Part No.
TT516
Description
Kit (double height) includes:
1-mounting strip (8.375" long)
1-cover
For Panels
1600, B1600,
1700, B1700
1-marking strip sheet
(3 strips per sheet)
1-marking strip sheet
(3 strips per sheet)
4-mounting screws
4-mounting screws
DS312
DS313
Cover (used with Kit DS311)
Marking strip sheet (used with
Kit DS311)
–
–
TT517
TT518
Marking strip sheet (used with
Kit TT516)
Cover (used with Kit TT516)
–
–
X-WIDE® VERTICAL DESIGNATION STRIPS
X-Wide designation strips mount on either side (or both) of
standard 19" and 23" wide panels and do not interfere with
horizontally mounted strips. Each kit contains two mounting
brackets which easily fasten with mounting screws provided.
Marking strips and clear plastic covers slide into place. Each
kit fits onto both sides of a jack panel. X-Wide strips are used
on the following panels:
UNDRILLED
PREDRILLED
3-row Jack Panels Assembly
with DS323 X-Wide
Designation Strip installed
1600, A1600, 1700 B1700, TT51
through TT62, 2-, 4- & 6-Wire
TT-Connectorized Jackfields, 2- & 6-Wire TT-Connectorized
D1600, D1700, BD1700,
TTD51 through TTD62, 2- 4 &
4-Wire TTPC Connectorized
Jackfields, 1200, 1400, 1400320,
2600,and 2600320.
Jackfields, 2 & 4-Wire TTPC
Connectorized Jackfields.
SPECIFYING NOTES: Each kit fits both sides of a jack panel (Standard
height 1.75". Also available in 3.5 inch and 5.25 inch heights.
Prefix letter“D” indicates panels have been predrilled countersunk holes to
facilitate mounting X-Wide strips. Series 1200, 1400, & 2600 can be predrilled
on special order.
Assembly sequence
of DS323 X-Wide
Designation Strip
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
JACK PANELS
®
-
238 X WIDE VERTICAL DESIGNATION STRIPS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
X-WIDE® VERTICAL DESIGNATION STRIPS
DS351
DS353
X-WIDE VERTICAL DESIGNATION STRIPS
Part No.
DS321
Description
For Panels
Kit (.75 x 1.75 inches) includes:
2-mounting brackets
2-marking strips
2-covers
4-mounting screws, nuts and
lockwashers
1600, A1600
1700, B1700
TT51 thu TT54,
TT59 thru TT62,
2- & 4-Wire
TTConnectorized
Jackfields, 2-, 4-
& 6-Wire TTPC
Conntectorized
Jackfields
DS322
DS323
DS350
DS351
Kit (.75 x 3.5 inches) includes:
2-mounting brackets
2-marking strips
2-covers
8-mounting screws, nuts and
lockwashers
Kit (.75 x 5.25 inches) includes:
2-mounting brackets
2-marking strips
2-covers
12-mounting screws, nuts and
lockwashers
Kit (.75 x 2.265 inches) includes: B1600, C1600
2-mounting brackets
2-marking strips
2-covers
4-mounting screws, nuts and
lockwashers
Kit (.75 x 1.75 inches) includes:
1-marking strip
1-cover
(Used on all 1.75 inch height
connectorized jackfields
except next to hinge)
Kit same as DS351except
narrow width. To be used next
to hinge.
Same as DS321
(Mounted in
pairs)
6-Wire TT-
Connectorized
and panels for
DS321
ORDERING
1. Order by part number from table.
2. To order X-Wide® strips installed on panels,
contact Switchcraft.
2-, 4- & 6-Wire
Connectorized
Jackfields, TTPC
Connectorized
Jackfields
DS352
DS353
Same as DS351
Kit (.75 x 5.25 inches) includes:
1-marking strip
1-cover
6-Wire TT-
Connectorized
Jackfields
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
MOLDED CABLE ASSEMBLIES 239
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
DESIGN MATERIALS AND FEATURES
Molded cable assemblies offer many advantages over
conventionally-fabricated cables:
WIRE AND CABLE
Switchcraft provides over 100 types of wire and cable from
which molded cable assemblies are manufactured. Basically,
30 different cables are used for standard tooling. There are no
additional charges where standard tooling exists.
• Improved wiring strain relief.
• Proper match of cable diameter to handle.
• Sealed junction: Less exposed area; less contamination
due to moisture, dust, dirt.
• Lower weight and smaller size.
• 100% shielding on selected types.
• Color to match/complement equipment decor.
• Legends, color codes, ribs, dot, customer logo/indicia
can be added.
• All molded cables are 100% tested for continuity, shorts
and voltage breakdown (250 or 500V).
• All Switchcraft® molded assemblies are UL recognized.
Tooling is designed so cable entry openings on molded plastic
handles fit tightly to the outside diameter of the cable. The
tighter fit holds cable secure and is more resistant to abuse
than if a larger opening were used.
DESIGN AND FABRICATING TECHNIQUES
Switchcraft’s engineering staff is supported by a complete tool
and die making facility, as well as a fully equipped and staffed
molding department to fill all of Switchcraft’s plastic molding
requirements.
OEM COST SAVINGS
The molding department uses injection molders of
semi-automatic, multiple-cavity type to obtain high production
rates.
Molded cable assemblies generally cost less than your
in-house conventionally-fabricated assemblies. Specific
advantages are elimination of:
1.Your evaluation, ordering, incoming inspection, and
stocking of individual parts.
2.Your plant/equipment needs for in-house fabrication.
3. Your tooling/labor costs
MANUFACTURING SEQUENCE (EXAMPLE)
Step 1: The 1-piece tip rod is firmly staked into the phone plug
finger assembly, making a complete and mechanically secure
assembly. (Refer to Figure 1) The staking process, using precision
manufactured parts, keeps the tip rod assembly from working
loose and causing mechanical and electrical problems later.
4. Your production line QA/QC.
MOLDED CABLE RELIABILITY
In a series of OEM-conducted tests of Switchcraft versus
non-molded, fabricated cables, Switchcraft cables were shown
to be superior.
Step 2: Cable center conductor is soldered to tip rod; then the
tubular bridge sleeve is slid forward, bringing the cable shield in
contact with the circular notch around rear of tip rod assembly.
1. Fabricated cables broke at lower pull forces: OEM types – 24
to 34 pounds, molded cables – 37.5 to 41 pounds
(molded cables did not break at terminations; the cable itself
broke about one to two feet back from the connector).
2. Fabricated cables suffered broken wires at low pull-out force
limits. Molded cables had cable breaks before cable pulled
out of the handle, in most instances. And this failure
occurred, as previously noted, at higher pull-out forces.
Strengthened molded cable assemblies out-performed
fabricated assemblies, and in fact, the crimp molding process
makes it stronger than the wire itself.
Step 3: Bridge sleeve is crimped tightly to tip rod assembly and
cable. Center conductor is completely isolated from potential
pulling strains, and shield makes a firm, low resistance
connection with plug sleeve.
Step 4: A dimensionally stable plastic handle/body of the
proper color, size and shape is molded into place. Features are
depressions for finger grip, cable entry opening customized to
cable diameter to minimize wear on cable, and handle/body
molded in one place.
From start to finish, Switchcraft’s molded cables are designed
and built with maximum quality and reliability. There is virtually
no limit to the type and characteristics of special molded cables
that Switchcraft can build to special order. For all special
orders, consult Switchcraft.
SPECIAL ORDER ITEMS
• Customer Iogo
• Panel Relief Bushing. Specify panel thickness and exact
point on cable where bushing is to be installed. Standard
panel opening is .50" (12.7 mm) diameter. Double
flatted in panels up to .125" (3.18 mm) thick.
• Molded Cable Clamp Bands or Y-Junctions.
(Refer to page 258.)
FIGURE 1: MOLDED CABLE MANUFACTURING STEPS
FOR 1/4" LITTEL PLUG®
• Special Termination (see separate chart). Contact
Switchcraft for specials and provide complete details.
1. One Pc. Tip Rod
Assembly
2. Center
Conductor
Termination
Bridge
Sleeve
TYPES OF PLASTICS
Thermoplastics used for molded cable assemblies, have
excellent electrical and mechanical properties, are economical,
convenient for molding, and can be provided in an array of
colors. They have electrical characteristics far higher than
required, and provide dimensional stability, abrasion and
abuse resistance, and can be molded with a smooth mirror-like
finish or matte or semi-matte finishes.
3. Crimped Bridge Sleeve
4. Complete
Body/Handle
Molded in Place
Cable Entry Opening - Custom
Selected to fit Cable Used
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
240 3.5MM MOLDED CABLE ASSEMBLIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
3.5MM MOLDED CABLES
35HRXXX35
36HRXXX36
35HRXXX84
SPECIFICATIONS
PLUGS
Tip, Ring and Sleeve: Brass with nickel-plate
Flex Life: 5000 cycles minimum
Plug Insulator: ACETAL
FEATURES AND BENEFITS
• Choose plug-to-plug or plug-to-stripped and tinned leads
• 3.5 mm plugs available as straight or right-angle
• Available in mono and stereo
• NOM.29 GA jacketed conductors (red and white)
with copper spiral shield
• Cable O.D. 3.0 mm nom./.118" nom.
• Black cable
PART NUMBERING SYSTEM
ORDERING INFORMATION
1. Order by part number.
2. Contact Switchcraft for custom requirements.
32 - Mono
33 - RA Mono
35 - Stereo
H - Black R - 3.0 mm nom.
2-conductor wire
with spiral copper
shield
Length (feet)
036 (3)
072 (6)
32 - Mono
33 - RA Mono
35 - Stereo
36 - RA Stereo
84 - Stripped
and tinned
36 - RA Stereo
144 (12)
90 - Straight
Cut Off
END CODE: 35
END CODE: 36
END CODE: 84
3.5 mm STRAIGHT PLUG
3.5 mm RIGHT-ANGLE PLUG
STRIP and TIN
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
POWER PLUGS AND JACKS
241
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES
With Power-Plug Battery Charger Plugs and Jacks
ST760, ST765 – Termination Code: 47, 48
SPECIFICATIONS
PLUG
Sleeve: Copper alloy, nickel-plated.
Pin: Silver-plated copper alloy.
Finger Insulator: Plastic.
Insulating Washers: Rigid plastic.
Sleeve Terminal: Steel, tin-plated.
Molded Handle: Plastic.
JACK
.080-.084 DIA x .328 DEEP
(2.03-2.13) DIA x (8.33) DEEP
ST-760
ST-765
Bushing: Brass, nickel-plated copper alloy.
Washers: Rigid plastic.
.099-.103 DIA x .328 DEEP
(2.52-2.61) DIA x (8.33) DEEP
Pin, Springs, and Terminals: Plated copper alloy.
Housings: Thermoplastic.
NOTE: ST760 is a molded version of S760; ST765 is a molded version of 765.
CABLE
RA760, RA765 – Termination Code: 52, 53
We will build assemblies on cable furnished by you,
.156" (3.96 mm) outside diameter, or on cable we purchase to
your specifications. Jacket must have temperature rating of
60° C minimum. Optional mold available for larger cable; order
as ST760L or ST765L.
DESIGN FEATURES
• ST760, ST760L, RA760 – accepts .08" (2.03 mm)
diameter pin.
• ST765, ST765L, RA765 – accepts .099" (2.54 mm)
diameter pin.
• RA712A:
• Mates with ST765, ST765L, and RA765.
• 2 conductor.
• Mounts in .313" diameter hole in panels up to .125" thick.
• Pin outside diameter is .108" - .112" split pin.
• Automatic switchover from AC to DC.
• RA722A:
• Mates with ST760, ST760L, and RA760.
• Pin outside diameter is .086" - .090" split pin.
• Molded-in cable clamp sleeve terminal (RA plugs only).
• For use with sockets similar to those used on portable
radios, tape recorders, television receivers and appliances
which feature AC adapters and/or battery chargers.
• Available with terminations of another ST760, RA760
stripped and tinned ends, spade lugs, alligator clips, and
more on special order.
.080-.084 DIA x .328 DEEP
.(2.03-2.13) DIA x (8.33) DEEP
.099-.103 DIA x .328 DEEP
.(2.52-2.61) DIA x (8.33) DEEP
RA-760
RA-765
RA712A and RA722A
Termination Code: 71, 72
• Jacks available with extended bushing for use with
Switchcraft locking power plugs 761K, 766K, S761K,
and S766K on special order.
*RA712A
.108" -.112" Split Pin
RA722A
.086" -.090" Split Pin
See ordering guide on next page.
Collapses to fit .10" Diameter Pin
Collapses to fit .08" Diameter Pin
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
ORDERING GUIDE
242
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES WITH POWER PLUGS AND JACKS
PART NUMBERING SYSTEM
TO CREATE A PART NUMBER
1. Identify Terminations (both ends)
2. Indicate Color and Type of Cable
3. Select the Length of Assembly
DC POWER CABLE ASSEMBLIES
Type
Termination
Color
Cable*
Length (feet)
Termination
ST760
ST765
4
4
5
5
7
7
5
5
7
7
7
8
7
8
3
4
2
3
1
2
G-Gray
H-Black
C
K
0
0
1
2
8
4
(1.5)
(2)
4
4
5
5
7
7
5
5
7
7
8
9
7
8
7
8
3
4
2
3
1
2
4
0
ST760L
ST765L
ST760K
ST765K
RA760
Y
Z
0
0
0
1
3
4
7
2
6
8
2
0
(3)
(4)
RA765
RA712A
RA722A
(6)
(10)
*See “Cable Types” chart on page 260. Note: Some configurations will be special orders. Contact Switchcraft.
TYPICAL STANDARD PART NUMBERS
STRAIGHT 2-CONDUCTOR .100 PIN POWER PLUG (#48) TO:
Termination (other end)
Cable
Length (feet)
Part Number1
48HC07248
48HC07284
48HC07290
48HK07271
(power plug) #48
C
C
C
K
6
6
6
6
(stripped wires) #84
(blunt cut) #90
(power jack .100 pin) #71
1. All cables listed here are black.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
™
EN3 MOLDED CABLE ASSEMBLIES 243
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EN3™ MINI WEATHERTIGHT OVERMOLDED CABLE ASSEMBLIES
FEATURES AND BENEFITS
SPECIFICATIONS
MECHANICAL
Shock: Mil-Std 202 Method 213B, condition K
Vibration: Mil-Std 202 Method 201
• Dual purpose handle provides flex relief and finger grip
design for easy insertion and withdrawal.
• Available in both cord and in-line versions.
• 2 through 8 pin configurations.
Life: 600 insertion/withdrawal cycles (minimum)
• Superior leakage protection. Contact area is double-sealed
for excellent moisture and chemical resistance.
• Integral O-ring and gasket. O-ring is molded onto cord
housing assembly and gasket is molded onto panel
housing assembly to prevent leakage and eliminate
need for additional copper case o-rings and gaskets.
• Thermoplastic rubber body simulates closed entry contact
system to prevent probe damage or accidental loss of
spring retention due to misaligned or bent pins.
• Housing rated UL 94V-O against flammability.
• Exceeds Coast Guard specifications for water tightness
(CFR 46 Part 110.20).
ELECTRICAL
Voltage Rating (sea level): Tested at 600 VRMS
Insulation Resistance: 100 megohms (minimum) at 77° F
Contact Resistance: 5 milliohms (maximum)
Current Rating: 7.5 Amps (#20 contact);
13.0 Amps (#16 contact)
ENVIRONMENTAL
Temperature Limits: -40°C to +65°C (non-operating)
Moisture Resistance: Mil-Std 202 Method 106F
Insulation Resistance: Mil-Std 202 Method 302 condition B
Thermal Shock: Mil-Std 202 Method 107G
• Exceeds enclosure rating IP16/IP18 when not mated or
covered and IP66/IP68 when mated or covered (IEC 529).
• Exceeds enclosure rating 6P at 1000V when mated
or covered (NEMA 250).
Salt Spray: Mil-Std 202 Method 101D condition B
RATINGS
IP16/IP18
IP66/IP68
APPLICATIONS
• Process Control
NEMA 250 (6P)
CFR 46 Part 110.20
UL 94V-O
• Communications
• Marine Electronics
• Transportation
• Medical Instrumentation
• General Industrial Electronics
• Geothermal Instrumentation
Patent 5,485,673 File 36049
OVERMOLDED STYLE NUMBER
#20 CONTACT SIZE
MATERIALS
Connector shells, contact locking disk:
Thermoplastic polymer glass fiber, flame retardant
Coupling ring: Nylon
Number of Pins
Male Cord
2
3
4
5
6
7
8
502
512
522
532
503
513
523
533
504
514
524
534
505
515
525
535
506
516
526
536
—
—
Female Cord
Male Inline
517
527
—
518
528
—
Connector shell interior: Thermoplastic rubber
Contacts: Copper base alloy gold-plated over
nickel underplate
Female Inline
OVERMOLDED STYLE NUMBER
#16 CONTACT SIZE
PART NUMBERING GUIDE*
Example:
Number of Pins
Male Cord
2
3
4
5
6
7
8
1st
Termination
Length
in Inches
2nd
Termination
552
562
572
582
553
563
573
583
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Color
Cable
Female Cord
Male Inline
503
H
A
072
184
*In most instances the multi-conductor cable will be used – found on page 252.
Female Inline
The overmolded EN3™ cable can accept nominal cable
O.D.’s up to .300.
Note: 9-18 versions can also be molded. Contact factory for details.
Tooling charges may apply for customer specified cable.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
244 MOLDED CABLE ASSEMBLIES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
CORDETTE® AND CORD SWITCH ASSEMBLIES
97WVXXX06
(shown with
optional clip)
99GVXXX04
97GVXXX06
Also available
with 3.5 mm plug
finger termination.
99GD07261
97WDXXX61
99WD07284
FEATURES AND BENEFITS
SPECIFICATIONS STYLE 97
• Momentary, 0.5 A switching combined with
1-piece molded plastic body qualifies Cordette for all types
of commercial and industrial usage.
• Available with molded-on Cordette switch or assembled
Cord switch (ED series).
• Cable features PVC outer jacket and withstands rugged use.
Body: Series ED900
Housing: Die-cast zinc, satin nickel-plated.
Switch Body and Insert Bushing: H.H. Brass, nickel-plated.
Insulation: XXXP paper-base phenolic.
Cable Relief Bushing: Black neoprene.
Pressure Plates: Stainless steel.
Cable Relief Screws: Steel, nickel-plated.
SERIES ED900
TERMINATION CODE: 51
TERMINATION CODE: 06, 07
(06 - 2 conductor not shown)
TERMINATION
CODE: 50
TERMINATION
CODE: 84
TERMINATION CODE: 61
DESCRIPTION
1st Term
Code
99
Housing &
CABLE
CODE
V
Cable Length (In.)
2nd Term
Code
84
Circuitry
Button Color
Example:
Cable Color
X
X
X
Std. Cordette (921K)
ED903 Series
G
0
7
7
Std. - 1A (No Code)
1 - 1B
Std. Black (No Code)
H - Black
97
Standard Cable
Type for 1/4" Plugs
G-Gray
H-Black
B-Beige
W-White
G-Gray
H-Black
W-White
H-Black
V (W1230-1)
V (W1230-2)
V (W1230-4)
V (W1230-5)
D (W1032-1)
D (W1032-2)
D (W1032-3)
E (W1065-2)
.250"
.250"
.250"
.250"
.109"
.109"
.109"
.100"
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
18GA
18GA
18GA
18GA
25GA
25GA
25GA
26GA
06
07
2 - 1C
R - Red
3 - AB
W - White
Standard Cable
Types for Tini® and
Micro Plugs
61
50
51
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
CORDETTE® SWITCHES
245
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES
WITH CORDETTE® SWITCHES
ST900
Termination Code: 99
SPECIFICATIONS
SWITCH
Housing: White plastic (standard).
Molded Body: Gray plastic (standard) with contrasting trim
and gray pushbutton.
Contacts: Integral, copper alloy, hard gold-plated form 1-A, 0.5
A, 50 W maximum, AC, non-inductive load. Not recommended
for high voltage circuits.
Insulation: Thermoplastic UL 94V-0.
Button Color: Black (standard). Other colors available on
special order.
ST900
CABLE
Standard Unshielded—Type W-1230.
Note: See Standard Cable Chart on page 260 for details.
We will build assemblies on cable furnished by you, .27" (6.68
mm) outside diameter, or on cable we purchase to your
specifications. Jacket must have temperature of 60° C minimum.
ST900 (#99)
Button stroke only .063" (1.6 mm). Cable leads soldered
directly to switch terminals. Standard button is with 1-A switching.
Use termination number “99” with all cable numbering charts
except multi-pin interconnection. Use code “198” for multi-pin
interconnections.
See Switch Section of Switchcraft’s Engineering Design Guide
for more details on the ST900.
ST900F
Part Number
Description
Cordette Switch,
phone jack termination
921
Same as 921, plus 6-foot,
2 conductor cable with stripped
and tinned leads.
921K
SPECIAL ORDER FEATURES
• 1-B, 1-C, or 1-A + 1-B switching.
• Red, green, blue, white or yellow pushbuttons.
• Legends
• Other body colors
• ST-900 - Custom-molded to any of a large selection of
cables. Also many cable terminations, i.e., phone plugs,
extension jacks, phono plugs, spade lugs, alligator clips,
stripped and tinned leads, etc.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
246 MULTIPIN INTERCONNECTORS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES WITH DIN PLUGS
STYLES RA300 AND ST300
APPLICATIONS
• Computer
• Data Communications
• Instrumentation
Style ST307
Termination Code: 307
• Medical Systems
• Process Controls
• MIDI (Musical Instrument Digital Interface)
FEATURES
• Long life
• 7 different pin configurations: versatile circuitry
• Fully molded plugs sealed against contamination
(moisture, dust, dirt)
Style ST324
Termination Code: 324
• Fully shielded: plugs with interference
protection/ common ground-shield
• Strain relief: protects internal wire connections
• Flex relief: molded integral with handle
for extra protection. No exit stress failures
• Locking: 30° twist locking for anti-vibration
protection and ease of engagement
• Straight and coil cords: stock and custom styles,
colors, lengths
Style RA374
Termination Code: 374
• Shielded or unshielded cables: stock and custom
styles, colors, lengths
• Molded through-panel cable relief: extra
cable protection
• Custom wiring/ keying: gives extra choice in
mounting and circuit selection
• Custom contact plating: precious and other metals
• Custom logo: your identification on molded plugs
• 100% tested for continuity, shorts, appearance,
voltage breakdown (250 or 500 V)
Style RA356
Termination Code: 356
COMPLETE SHIELDING SYSTEMS
Switchcraft also offers shielded DIN receptacles for use with
shielded molded cable assemblies. Together they provide a
valuable design tool to suppress EMI interference to permit
you to meet strict requirements of FCC Docket 20780.
Switchcraft DIN molded cable assemblies meet increased
demand for modern, field-tested connections for a wide range
of electrical/electronic applications. Connectors are DIN
(Deutsche Industrie Norm) circular type, male or female (lock-
ing or non-locking) with 3 to 8 pins/contacts. Units are molded
and protected with a rugged handle, and are fully shielded and
equipped with advance design cable relief. Switchcraft cable
assemblies and mating receptacles adhere to strict
requirements of FCC Docket 20780 and offer fully shielded
links for data and instrumentation applications of all kinds.
ORDERING
1. Order by part number from guide on page 251.
2. For special order items, contact Switchcraft with details.
SPECIFYING NOTE: See Connector Section of Switchcraft’s
Engineering Design Guide for mating receptacles.
SHIELDING EFFECTIVENESS
Effectiveness of shielding is frequency-dependent; as
frequency increases, more shielding is required to maintain
comparable shielding effectiveness. The chart below
delineates shielding effectiveness with molded cable assemblies
with 100% foil shield cables and shielded DIN connectors.
Frequency Range MHz
Shielding Effectiveness, dB
30-500
60-400
500-800
-30
-20
-10
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
MULTIPIN INTERCONNECTIONS
247
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES WITH DIN PLUGS (continued)
STYLES RA300 AND ST300
SPECIFICATIONS
ELECTRICAL
PART NUMBERS – MOLDED CABLE ASSEMBLIES
Term.
A
Term.
B
Part Number
Description
◊305KD084184
Black coil cord. 15" (381 mm)
retracted; 78.74" (2 m)
ST305
—
Contact Resistance: Cord Plugs and Receptacles.
.010 ohms, contact spring/pin; .030 ohms, ground clip/shell.
Control and Switching Receptacles: .015 ohms,
contact spring/pin; .020 ohms, switch contacts.
Dielectric Withstanding Voltage: 500 V (rms).
Leakage Resistance: 105 MΩ
extended. 5 pin male with
other end stripped and tinned
on cable number W-1301-2.
◊305HJ084184
◊306HK042306
◊306HK084306
Black cable cord. 7 feet (2.13 m)
in length. 5 pin male with
other end stripped and tinned
on cable number W-1279-2.
ST305
ST306
ST306
—
MECHANICAL
Life: 5000 cycles
Black cable cord. 39.37" (1 m)
in length. 6 pin male to
6 pin male on cable number
W-1289-2.
ST306
ST306
Insertion/Withdrawal Forces:
Number of
Contacts
Insertion Force
pound/N
Withdrawal Force
pound/N
Black cable cord. 78.74" (2 m)
in length. 6 pin male to
6 pin male on cable number
W-1289-2.
2
3
4
5
6
7
8
3.6/(16)
5.4/(24)
7.2/(32)
9.0/(40)
10.8/(48)
12.6/(56)
14.4/(64)
.45–2.7/ (2–12)
.67–4.1/ (3–18)
.90–5.4/ (4–24)
◊ Special order only; contact Switchcraft.
1.24–6.8/ (5.5–30)
1.46–8.1/ (6.5–36)
1.68–9.5/ (7.5–42)
1.90–10.8/ (8.5–48)
FOIL SHIELD CABLES – STRAIGHT
Part Number
W-1279-2
Color
Black
Black
Length, inch (mm)
Length must be specified.
W-1289-2
PLUG MATERIALS
Pin Contacts: Silver-plated, copper alloy.
Insulating Washer: Thermoplastic.
Locking Plug Housing: Nickel-plated, die-cast zinc alloy.
Other Housings: Plated steel.
Molded Handle: Flexible thermoplastic. Strain relief
matte finish.
NOTE: All connectors meet DIN specifications. Din
specification numbers (except for 4-pin, 5-pin 240°)
will be furnished on request.
ORDERING
1. See table below for termination descriptions. Termination
code is the same number as the plug style (e.g. termination
code for a ST305 is 305).
2. See page 251 for ordering guide.
Part Numbers-Male (pins)
3@180°
B
4@210°
D
5@180°
F
5@240°
E
6@240°
G
7@270°
8@270°
N
Pin Arrangements
Description
H
Straight handle.
ST303
ST323
RA353
RA373
ST309
ST329
RA359
RA379
ST305
ST325
RA355
RA375
ST304
ST324
RA354
RA374
ST306
ST326
RA356
RA376
ST307
ST327
RA357
RA377
ST308
ST328
RA358
RA378
Straight handle. 30° twist
lock ring fastening, mates with
lock flange plugs and receptacles.
Right-angle handle.
Right-angle handle. 30° twist
lock ring fastening, mates with
lock flange plugs and receptacles.
1. See next page for Pin/Contact arrangements.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
MULTIPIN INTERCONNECTIONS
248
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES WITH DIN PLUGS (continued)
STYLES RA300 AND ST300
ST300
CUTAWAY VIEW OF STYLE ST303
100% THROUGH-
CONNECTOR
SHIELDING
DOUBLE-FLATTED
HOLE
SHIELDED
CABLE
PANEL UP TO
.125"
(3.18 mm)
THICK
2-PIECE PANEL
RETAINS CABLE
RELIEF
CABLE
RELIEF
CRIMP
STRAIN
RELIEF
RUGGED
COMPLETELY
MOLDED HANDLE
EXTERNAL
CABLE RELIEF
Pin/Contact Arrangements
STYLES ST303 TO ST309
STYLES ST323 TO ST329
STYLES RA353 TO RA359
STYLES RA373 TO RA379
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
MIDI MOLDED CABLE ASSEMBLIES 249
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MIDI CABLES
Standard black cable
and handle
Optional red cable
and handle
FEATURES AND BENEFITS
MIDI CABLES
• Molded connectors provide superior pull-out
retention and greater environmental protection
than assembled versions.
Part number
MD3
Length
3 foot
Color
Black
Black
Black
Black
MD6
6 foot
• All five pins wired active with high definition
MD10
10 foot
15 foot
Belden Brilliance® cable.
MD15
• Can be used with any type MIDI instrument.
SPECIFICATIONS
STANDARD PRODUCT
• Belden Brilliance® 24 awg, 4 conductor,
braid shielded cable.
• Silver-plated pins
• Belden Brilliance® 24 awg, 4 conductor,
braid shielded cable
• Black cable
• Wiring conforms to MIDI specifications including the
clock/sync capabilities on pins 1 and 3.
• Molded 180 degree 5 pin DIN connectors.
• Standard color is black with other colors available
on special order.
• Black handle
SPECIAL ORDER
• PVC molded handles and cable jackets.
• All molded cables are 100% tested for continuity,
shorts and voltage breakdown.
• Gold-plated pins
• Other cable types
• Optional lengths
• Color cable
ORDERING INFORMATION
1. Order by part number.
• Color handle
2. Contact Switchcraft for more information.
Belden Brilliance® is a registered trademark of Belden Wire and Cable Company.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
MULTIPIN INTERCONNECTORS
250
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES
WITH MINIATURE, SHIELDED, MOLDED TINI Q-G® PLUGS
STYLE ST600
Tini Q-G® miniature plugs offer 3- through 6-pin/contact
connecting with full shielding, small size, RFI-protected
termination of analog/digital circuits/equipment. Typical
applications are for EIA RS-232C and RS-449 type
connections. Plugs retain all Tini Q-G® features, including
latchlock, strain relief, flex relief, polarization and
“scoop-proof” construction. See Connector Section for details
on features and specifications. Shielding of these plugs meets
U.S. Navy Tempest requirements with proper cable and
mating connector choice.
MOLDED CABLES WITH STRAIGHT FEMALE
Tini Q-G® PLUGS (Special Order Only)
Three- through 6-contact plugs are molded into a complete
cable assembly per customer requirements. Plug includes
latch for secure connection, “through-ground” provision, and
external cable flex relief. Plugs are molded onto shielded or
unshielded cables of .180" – .215" diameter Standard cable
color is gray; black, beige and other colors can also be
specified. In addition, UL 94V-0 rated cables can be specified.
Cable Length
Contact Arrangements (Contact View)
Styles ST603, ST604, ST605, ST626
Termination Codes: 603, 604, 605, 626
Note: Reverse gender molded male cable assembly available.
Call factory for details.
Plug
Style 2
Mating
Receptacles 1
Description
◊ST603
◊ST604
◊ST605
◊ST626
3-contact straight
female plug (molded)
TA3M, TB3M
TA4M, TB4M
TA5M, TB5M
TA6ML, TB6M
4-contact straight
female plug (molded)
5-contact straight
female plug (molded)
6-contact straight
female plug (molded)
1. See Connector Section of Switchcraft’s Engineering Design Guide
for other mating receptacles.
2. Termination code is the same as the numbers in the plug style (e.g. termination
code for a ST626 is 626). See multi-pin ordering guide on next page.
IMPORTANT SPECIFYING NOTE
◊ Special 3, 4 and 5 pin/contact patterns can be tooled on special order where
production quantities warrant special handling. Contact Switchcraft with your
requirements.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
ORDERING GUIDE 251
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES FOR MULTI-PIN INTERCONNECTION
PART NUMBERING SYSTEM (NOT ALL NUMBERS SHOWN)
1. Identify Terminations (both ends)*
STANDARD MULTI-PIN CABLE ASSEMBLY
TERMINATION VS. CABLE CROSS-REFERENCE
2. Indicate Color and Type of Cable
3. Select the Length of Assembly
Cable
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
2
0
0
2
2
2
2
2
2
2
2
2
4
MULTI-PIN CABLE ASSEMBLIES
0
8
7
0
7
3
9
8
7
8
9
8
4
3
9
7
6
7
7
1
8
9
9
0
4
2
Termination
Color
Cable1
Length (feet)
Termination
(examples)
2
1
1
#
6
2
6
2
#
#
#
2
1
RA353
RA354
RA355
RA356
RA357
X
X
X
X
X
X
X
X
X
X
T
E
R
M
I
303
304
305
306
307
308
309
603
604
605
606
G-Gray
H-Black
D-Beige
A
B
C
D
E
036 (3)
060 (5)
072 (6)
120 (10)
3
3
3
3
3
3
3
6
6
6
6
1
1
0
0
0
0
0
0
0
0
0
0
2
8
9
3
4
5
6
7
8
9
3
4
5
6
4
0
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
N
A RA358
X
X
X
X
F
T
I
O
N
RA359
RA373
RA374
RA375
RA376
RA377
RA378
RA379
ST303
ST304
ST305
ST306
ST307
ST308
ST309
ST323
ST324
ST325
ST326
ST327
ST328
ST329
ST603
ST604
ST605
ST626
X
X
X
X
X
---
G
H
J
X
X
X
X
X
X
K
M
---
Q
---
U
X
X
X
X
X
X
1. See next page for cable descriptions.
X
X
* Please refer to page 243 for EN3™ weathertight connector options.
X
X
Note:
X
• Other cables available on special order. Contact Switchcraft.
X
X
X
X
X
X
TYPICAL PART NUMBERS
X
X
X
X
STRAIGHT 3-pin DIN PLUG (#303) TO:
Length
(feet)
Part Number2
303HA060303
X
X
Termination (other end)
Cable
X
X
X
X
(3-pin DIN)
#303
A
5
(3-pin Tini Q-G®)
(Strip and tin)
(Blunt cut)
#603
#184
#190
A
A
A
5
6
6
303HA0606033
303HA072184
303HA072190
X
X
X
# - Indicates any number
X - Indicates that the cable in this column and the termination in this row can
be used together in a standard part number
2. All cables listed here are black.
3. .180" diameter.
1. - Other termination/cable combinations may be available or special order.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
CABLE GUIDE
252
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
STANDARD MULTI-PIN INTERCONNECTION CABLES
FOR MOLDED CABLE ASSEMBLIES ON PAGES 243 THROUGH 251.
Cable Type
Color
Description
3 conductor, 22 AWG stranded, unshielded
.18" (4.6 mm) outside diameter, UL style 2960
4 conductor, 22 AWG stranded, unshielded
.18" (4.6 mm) outside diameter, UL style 2960
5 conductor, 22 AWG stranded, unshielded
.20" (5.1 mm) outside diameter, UL style 2464
6 conductor, 22 AWG stranded, unshielded
.20" (5.1 mm) outside diameter, UL style 2095
7 conductor, 22 AWG stranded, unshielded
.20" (5.1 mm) outside diameter, UL style 2095
8 conductor, 22 AWG stranded, unshielded
.23" (5.8 mm) outside diameter, UL style 2464
3 conductor, 24 AWG stranded, foil shielded
.18" (4.6 mm) outside diameter
Cable Code
W1203-2
Black
A
W1089-1
W1077-1
Gray
Gray
B
C
D
E
F
W1206-1
W1206-2
Gray
Black
W1277-6
W1237-2
W1291-6
W1288-2
Beige
Black
Beige
Black
G
H
4 conductor, 24 AWG stranded, foil shielded
.18" (4.7 mm) outside diameter
W1279-1
W1279-2
W1279-6
W1289-2
W1289-6
W1290-1
W1290-6
Gray
Black
Beige
Black
Beige
Gray
5 conductor, 24 AWG stranded, foil shielded
.19" (4.8 mm) outside diameter
J
6 conductor, 24 AWG stranded, foil shielded
.22" (5.5 mm) outside diameter
K
M
Q
8 conductor, 24 AWG stranded, foil shielded
.23" (5.7 mm) outside diameter
Beige
5 conductor, 22 AWG stranded, braid shielded
.23" (5.8 mm) outside diameter
W1284-2
Black
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
SUBMINIATURE PLUGS AND JACKS 253
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES
With Micro Plug® Subminiature Phone Plugs
DESIGN FEATURES
• Thermoplastic insulation between tip and sleeve circuits.
• “Pear-shaped” one-piece tip rod.
• Cable clamp connects cable shield (or second conductor)
to plug sleeve.
SPECIFICATIONS
PLUG
Tip and Sleeve: Plated copper alloy.
Insulation: W-1032-1. Molded thermoplastic.
Sleeve Terminal: Tinned copper alloy.
Molded Handle: Plastic.
RA850
Standard Colors: Gray, white, black, brown.
Other colors available on special order.
Termination Code: 61
CABLE
Standard Shielded Cable—Type W-1032-1.
NOTE: See Standard Cable Chart on page 260 for details.
Order by part number from guide on page 259.
Special Cable: We will build assemblies on cable furnished
by you, .109" (2.77 mm) diameter maximum, or on cable
we purchase to your specifications. Jacket must have
temperature rating of 60° C minimum.
RA850: Right-angle Micro-Plug® plug with plastic handle.
Short body extension. Molded to cables up to .109" (2.77 mm)
outside diameter.
ST850: Straight Micro-Plug® plug, small plastic handle, only
.47" (11.9 mm) long.
NOTE: Micro-Plug® molded cable assemblies mate with
Switchcraft Micro-Jax® TR-2A.
ST850
Termination Code: 60
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
254 MINIATURE PLUGS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES With Tini Plug® Miniature Phone Plugs
RA700
RA710
Termination Code: 50
Termination Code: 51
ST700
ST740
Termination Code: 41
Termination Code: 46
ST750
ST710
Termination Code: 45
Termination Code: 40
DESIGN FEATURES
• “Pear-shaped” one-piece tip rod soldered directly
to cable conductor.
SPECIFICATIONS
PLUG
Tip and Sleeve: Nickel-plated copper alloy.
Cable Clamp: Tin-plated steel.
• Cable clamp connects cable shield
Insulation: Rigid plastic.
(or second conductor) to the plug sleeve.
Molded Handle: Plastic.
Standard Colors: Gray, white, black, brown.
Other colors available on special order.
RA700: Right-angle Tini Plug® plug with small plastic
handle. Short body extension, recommended for slightly
recessed jacks. Molded to cables up to .109" (2.77 mm)
outside diameter.
CABLE
RA710: Right-angle Tini-Plug® plug similar to RA700,
except longer body extension where equipment jack is
deeply recessed. Molded to cables up to .109" (2.77 mm)
outside diameter.
Shielded—Type W-1000-1 (suitable for ST740 and
ST750 due to cable Outside Diameter).
Shielded—Type W-1032-1 (suitable for all types on this page).
Standard Parallel—Type W-1041-1.
ST700: Straight Tini-Plug® plug offering the shortest and
smallest handle.
NOTE: See Standard Cable Chart on page 260 for details.
Order by part number from guide on page 259.
Special Cable: We will build assemblies on cable furnished by
you, up to .160" (4.06 mm) (for ST740 and ST750); .120" (3.05
mm) (for ST700, ST710, RA700, RA710) outside diameter, or
on cable we purchase to your specifications. Jacket must have
temperature rating of 60°C minimum.
ST710: Same as ST700, except with longer handle.
ST740: Straight Tini-Plug® with larger outside diameter
handle desirable.
ST750: Straight Tini-Plug® with same diameter handle
as ST740 and longer handle for easier handling.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
PHONO PLUGS AND JACKS 255
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES With Phono Plugs and Phono Extension Jacks
0
nation Code: 26
◊RA-35
Termination Code: Special Order
ST-60
Termination Code: 82
short handle)
ion Code: 29
ST-35
Termination Cod
handle)
ode: 31
Special Cable: We will build assemblies on cable furnished
by you (maximum diameter varies for types RA35, ST35,
ST40) up to .20" (5.08 mm) outside diameter for RA40 and
RA41 or on cable we purchase to your specifications. Jacket
must have a temperature rating of 60 C minimum.
SPECIFICATIONS
PLUG
Tip (prong): Nickel-plated, copper alloy.
Sleeve Connection: Plated copper alloy.
Insulation: Rigid plastic or thermoplastic.
Molded Handle: Thermoplastic.
Standard Colors: Gray, black, brown, red, white, tan,
or blue. Other colors available on special order.
◊RA35: Right-angle phono plug with body extension for
recessed jack. Cable: .188" (4.78 mm) outside diameter
maximum. Completely shielded. (Available on special order only.)
ST35: Straight phono plug with “finger grip” handle. Handle
.438" (11.13 mm) outside diameter. Completely shielded.
EXTENSION JAX
Tip Spring: Nickel-plated, hardened copper alloy.
ST40: Straight phono plug, similar to ST35, except with
Sleeve Connection: Plated steel.
longer handle.
Insulation: Rigid plastic.
Molded Handle (both Plug and Jack): Plastic.
Standard Colors: Gray, white, black and brown.
Other colors available on special order.
ST60: Straight extension jack with “finger grip” handle. Handle
.438" (11.13 mm) outside diameter. Completely shielded.
RA40: Compact right-angle phono plug with low profile, high
quality insulation, and short .281" (7.14 mm) molded handle
for audio and RF connections where space is at a minimum.
CABLES
RA35, ST35, ST40, ST60:
Standard Shielded Cable—Type W-1000-1.
Standard Parallel Cable (lamp cord)—Type W-1033-1.
RA40, RA41:
RA41: Same as RA40, except handle is .531" (13.49 mm) long.
DESIGN FEATURES
Standard Shielded Cable—Type W-1000-1 and W-1032-1.
Standard Unshielded (Parallel) Cable—Type W-1041-1.
• Can be specified with phenolic, nylon, glass-filled Teflon
or polypropylene internal insulators. Polypropylene is
recommended for RF connecting applications.
NOTE: See Standard Cable Chart on page 260 for details.
Order by part number from guide on page 259.
• Applications include stereo, PA and intercoms, audio-visual
and telecommunications, including RF connections in
2-way radio and paging systems.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
EXTENSION JACKS AND LITTEL® PLUGS
256
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES
WITH TINI-EXTENSION® JACKS
SPECIFICATIONS
Housing (or Sleeve): Nickel-plated, copper alloy.
Handle: Molded plastic.
Sleeve Terminal: Plated steel.
ST125
Termination Code: 83
Tip Spring: Copper alloy.
Insulation: Rigid plastic. Larger design also has a molded
thermoplastic insert.
Standard Colors: Gray white, black, brown. Other colors
available on special order.
Special Cable: We will build assemblies on cable furnished by
you, up to .160" (4.06 ram) outside diameter—or on cable we
purchase to your specifications. Jacket must have temperature
rating of 60° C minimum.
CABLE
Standard Shielded: Type W-1032-1.
Standard Unshielded: Type W-1041-1.
NOTE: See Standard Cable Chart on page 260 for details.
Order by part number from guide on page 259.
ST125: Straight Tini-Extension Jax jacks with same features
as ST121, on next page (shielded, 2-conductor), except with
.406" (10.31 mm) outside diameter, designed to mate with
Switchcraft Tini-Plug® plugs.
RA200
Termination Code: 15
MOLDED CABLE ASSEMBLIES
WITH LITTEL PLUG® PHONE PLUGS
SPECIFICATIONS
PLUG
Tip: Nickel-plated, copper alloy.
Sleeve: Plated copper alloy.
Insulation: Rigid plastic.
Internal Shield: Plated steel.
Molded Handle: Plastic.
Standard Colors: Gray, white, black and brown.
Other colors available on special order.
CABLE
RA205
FOR 2-CONDUCTOR PLUGS:
Termination Code: 13
Standard Shielded Cable–Type W-1000-1.
Standard Parallel Cable (lamp cord)–Type W-1033-1.
FOR 3-CONDUCTOR PLUGS:
Standard Shielded Cable–Type W-1021-1.
NOTE: See Standard Cable Chart on page 260 for details.
Order by part number from guide on page 259.
Special Cable: We will build assemblies on cable furnished by
you, .188" (4.78 mm) diameter maximum, or on cable we
purchase to your specifications. Jacket must have a
temperature rating of 60°C minimum.
DESIGN FEATURES
• Molded cables with Littel-Plug phone plugs feature
one-piece tip rod assembly connecting tip directly
to the soldered connection of the cable conductor.
• Unusual dual-purpose clamp terminal provides completely
shielded electrical connection and a cable clamp; connects
plug sleeve to cable shield or conductor.
RA200: Right-angle phone plug with plastic handle. Body
extension suitable for recessed jack. Completely shielded.
• Right-angle phone plugs (RA202, RA203, RA207 and
RA208) molded to cables up to .188" (4.78 mm) outside
diameter. RA202, RA203, RA207 and RA208 molded to
cables with maximum outside diameter up to .260" (6.6 mm).
RA205: Right-angle phone plug, similar to RA200, except
short body extension and handle for flush mounted jacks.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
EXTENSION JACKS AND LITTEL® PLUGS 257
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES
WITH LITTEL PLUG® PHONE PLUGS (continued)
◊RA207
Termination Code: 06
RA208
Termination Code: 07
ST200
Termination Code: 05
ST230
Termination Code: 10
RA202: Right-angle phone plug with plastic handle. Body
extension suitable where jack is recessed. RA203 is similar to
RA202, except 3-conductor plug.
◊RA207, RA208: Right-angle phone plug, similar to RA202,
except short body extension. Recommended use with
panel mounted jacks. RA208 is similar to RA207, except
3-conductor plug.
◊RA217: Special right-angle phone plug, identical to RA200
(previous page); also featuring a unique hook for hanging
various types of equipment (such as pillow speakers).
Completely shielded. Available on special order only.
RA202
Termination Code: 14
ST200: Straight phone plug with “finger grip” handle, but
short enough to fit in all equipment.
ST230: Straight 3-conductor phone plug; same features as
ST200. Completely shielded.
MOLDED CABLE ASSEMBLIES
WITH EXTENSION JAX® PHONE JACKS
ST121, ST131
Termination Code: 80, 81
SPECIFICATIONS
Housing (or Sleeve): Nickel-plated, copper alloy.
Handle: Molded plastic.
Sleeve Terminal: Plated steel.
Tip and Ring Springs: Copper alloy.
Insulation: Rigid plastic. Larger design also has a molded
thermoplastic insert.
Standard Colors: Gray, white, black, brown.
Other colors available on special order.
CABLE
Standard Shielded–Type W-1000-1 (for ST121).
Type W-1021-1 (for ST131).
ST121: Straight Extension Jax® jack is a shielded 2-conductor
jack with .50" (12.7 mm) outside diameter. Cable clamp
connects shield or second conductor to cable. Mates with
.25" (6.35 mm) diameter Switchcraft 2-conductor plugs.
Standard Unshielded–Type W-1033-1 (for ST121).
NOTE: See Standard Cable Chart on page 260 for details.
Order by part number from guide on page 259.
Special Cables: We will build assemblies on cable furnished
by you, up to .260" (6.6 mm) outside diameter, or on cables we
purchase to your specifications. Jacket must have temperature
rating of 60° C minimum.
ST131: Straight Extension Jax jack, same as ST121, except
3-conductor. Mates with .25" (6.35 mm) diameter Switchcraft
3-conductor plugs.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
258 CABLE CLAMP BANDS AND Y JUNCTIONS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES
WITH CABLE CLAMP BANDS
SPECIFICATIONS
MOLDED BAND
Housing: Plastic. Inserts can be added to our molds to
include customer’s name or trademark. Call for details.
Standard Colors: Gray, white, black, brown. Other colors
available on special order.
ST91
Termination
Code: 94
CABLE*
Standard Parallel Cable (lamp cord)–Type W-1033-1.
Standard Shield Cable–Type W-1072.
ST-91 DESIGN FEATURES
• For use on stereo connecting cables and on monaural
and stereo headset cables.
• Prevents further separation of individual leads on
“Rip” type cordage.
• Can be used as “Y” junction when used with standard
shielded cable such as Switchcraft W-1072; or as a cable
clamp for general purpose with Switchcraft W-1033
and W-1050.
*NOTE: See Standard Cable Chart on page 260 for details.
• Special assemblies can be built to OEM needs, using
various terminal lugs, special receptacles to phone plugs
or connectors.
Special Cable: We will build assemblies on cable furnished by
you (maximum diameter varies for types) or on cables we
purchase to your specifications. Jacket must have temperature
rating of 60°C minimum.
MOLDED CABLE ASSEMBLIES
WITH “Y” JUNCTIONS
SPECIFICATIONS
Y JUNCTION
Housing: Molded Plastic. Inserts can be added to our molds
to include customer’s name or trademark.
Standard Colors: Gray, white, black, brown. Other colors
available on special order.
ST90
Termination
Code: 93
CABLE*
Standard Shielded Cable–Type W-1000-1.
Standard Shielded Cable–Type W-1021-1.
ST-90 DESIGN FEATURES
• For use on binaural and stereophonic headphones.
• Accommodates 1- and 2-conductor shielded cables.
• Durable, strain and humidity resistant.
Larger “Molded Y” available. Ask for ST94.
• Special assemblies can be built to OEM needs, using
terminal lugs, special receptacles to phone plugs or
connectors.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
ORDERING GUIDE 259
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MOLDED CABLE ASSEMBLIES
PART NUMBERING SYSTEM
TO CREATE A PART NUMBER
1. Identify Terminations (both ends)
2. Indicate Color and Type of Cable
3. Select the Length of Assembly
MOLDED CABLE ASSEMBLIES (Not all numbers shown)
Termination
Color
Cable*
Length (feet)
Termination
0
1
2
4
8
8
8
9
5
5
5
0
0
2
3
9
G-Gray
H-Black
D-Beige
W-White
A
B
C
D
E
F
0
0
0
0
0
1
1
2
3
4
7
2
8
4
6
8
2
0
(1.5)
(2)
0
1
2
4
8
8
8
8
5
5
5
0
0
2
3
4
(3)
(4)
(6)
(10)
K
V
W
X
Y
Z
* See “Cable Types” chart on page 260.
Notes:
• Use any 2-number codes on previous pages for
termination number.
• Some configurations will be special orders. Contact Switchcraft.
• Some configurations may not be possible.
• Larger plug (#45) will be supplied in place of #40
when used with cable “A”.
TYPICAL STANDARD PART NUMBERS
STRAIGHT 2-CONDUCTOR PHONE PLUG (#05) TO:
Length
(feet)
Termination (other end)
(phono plug) #05
Cable
Part Number1
05HA07205
05HA03684
A
A
6
3
(stripped wires) #84
PHONO PLUGS (#25) TO:
(phono jack) #82
A
F
6
10
6
25HA07282
25HF12082
40HD07240
DUAL PHONO PLUGS (#25) TO:
(dual phono jacks) #82
3.5mm MINIATURE PLUG (#40) TO:
(3.5 mm plug) #40
D
1. All cables listed here are black.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
260 GENERAL CABLE GUIDE
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
STANDARD CABLE GUIDE
FOR MOLDED CABLE ASSEMBLIES ON PAGE 253 THROUGH 259
Cable Type
Color
Description
Cable Code
W1000
Beige
Gray
50Ω coax, plastic jacket over spiral shield with 22 AWG stranded center conductor;
W1000-1
W1000-2
A
.156" (3.96 mm) outside diameter. Average capacity 31 pF/feet, UL style 1354
Black
2 conductor, plastic jacket over shield with 2, 22 AWG conductor; .20" (5.2 mm)
outside diameter. Average capacity 20 pF/feet between conductor; 55 pF/feet between
shorted conductor to shield; 32 pF/feet each conductor to shield, UL style 2092
W1021-1
W1021-1
Gray
B
Black
W1013-1
W1013-2
Gray
2 conductor, plastic unshielded parallel with 2, 18 AWG stranded conductor;
.11" (2.8 mm) x .21" (5.3 mm) outside diameter, UL type SPT-1
K
D
Y
E
F
Black
W1032-1
W1032-2
Gray
48Ω coax, plastic jacket over spiral shield with 25 AWG stranded center
Black
conductor; .11" (2.8 mm) outside diameter. Average capacity 35 pF/feet
W1041-1
W1041-2
Gray
2 conductor, plastic unshielded tandem cable with 2, 24 AWG stranded
conductor; .06" (1.5 mm) x .12" (2.9 mm)
Black
W1065-2
Black
50Ω coax, plastic jacket over braid shield with 26 AWG stranded center conductor;
.1" (2.5 mm) outside diameter. Average capacity 30 pF/feet, RG-174
W1072-1
Gray
2 conductor, twin coax, plastic jacket over 2 individually shielded 25 AWG parallel
conductor. Average capacity 36 pF/feet, recommended for headset applications
W1230-1
W1230-4
W1230-5
Gray
2 conductor,plastic unshielded with 2, 18 AWG stranded conductor;
.25" (6.4 mm) outside diameter, UL type SVT
Beige
White
V
W1243-2
Black
75Ω coax, plastic jacket over shield with 27 AWG stranded center conductor;
X
C
Z
.15" (3.8 mm) outside diameter. Average capacity 20.5 pG/feet, UL style 1354 or 1436
W1033-1
W1033-2
Gray
2 conductor, plastic unshielded parallel with 2, 20 AWG stranded conductor;
.10" (2.54 mm) x .19" (4.7 mm) outside diameter, UL style 2433
Black
W1096-2
Black
2 conductor, plastic unshielded parallel with 2, 22 AWG stranded conductor;
.08" (1.9 mm) x .15" (3.8 mm) outside diameter
See page 251 for Cable Assembly Termination vs. Cable Cross Reference Table.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
CROSS REFERENCE GUIDE 261
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
CROSS REFERENCE GUIDE
STANDARD CABLE ASSEMBLY TERMINATION vs.
CABLE CROSS-REFERENCE
Cable
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
W
1
0
0
0
0
0
0
0
2
2
0
0
0
2
1
3
4
6
7
3
4
3
9
0
1
3
2
1
5
2
0
3
3
6
#
1
#
#
#
2
1
#
2
#
2
RA40
RA41
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
1
1
1
X
X
1
1
1
1
1
X
2
2
2
2
X
X
X
X
X
X
1
1
1
1
1
1
1
1
T
E
R
M
I
N
A
T
I
O
N
RA200
RA202
RA205
RA207
RA700
RA710
RA712A
RA722A
RA760
RA765
RA850
ST35
X
X
1
X
2
2
2
X
1
X
X
X
X
X
X
X
X
1
1
X
X
1
1
X
X
X
1
1
1
1
3
X
X
X
X
X
X
X
1
1
1
X
X
1
1
X
1
1
1
1
1
X
X
1
1
1
X
X
2
2
2
2
2
2
2
2
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
ST40
ST60
ST121
ST123
ST125
ST131
ST200
ST230
ST700
ST710
ST740
ST750
ST760
ST760L
ST765
ST765L
ST850
ST900
X
X
X
X
X
X
X
X
X
X
X
1
1
X
2
1
1
X
X
1
1
X
X
X
1
1
1
X
X
1
1
1
2
2
2
2
2
X
X
X
X
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
2
2
X
X
1
X
3
X
3
X
X
1
X
1
X
1
3
X
3
X
3
X
X
# - Indicates any number.
X - Indicates that the cable in this column and the termination in this row can
be used together in a standard part number.
1 - These cable assemblies may use heat shrink tubing under overmolded
terminations.
2 - These cable assemblies have two of the same termination at one end.
Each termination is molded in a different color.
3 - These cable assemblies use a larger overmold than is pictured in the
Engineering Design Guide.
4 - Other termination/cable combinations may be available on special order.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
"
"
262 1/4 TELEPHONE PATCH CORDS AND MIL TYPE 1/4 PATCH CORDS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" TELEPHONE PATCH CORDS
Switchcraft premium 3-conductor single patch cords are
designed for rugged, noise-free performance. Nickel-plated
plugs eliminate the need for periodical cleaning which keeps
your audio signals clear. Color cords provide instant visual
identification with a choice of three lengths. All cables are fully
shielded with rugged, braided thermoplastic outer jackets. Plug
handles are black. Audio patch cords are available with other
SERIES 20Q
lengths and brass plugs, if desired. Contact Switchcraft for
specifying assistance and cable length tolerances.
MIL TYPE 1/4" PATCH CORDS
Switchcraft Patch Cords are available in a variety of types to
meet requirements of communication, industrial and telephone
switchboard applications. Patch cords are constructed of high
quality bronze tinsel covered with thermoplastic insulating
material with braided shield and black thermoplastic braid
woven over the insulated conductors.
Switchcraft MIL-type Littel-Plug® and Twin-Plug® phone plugs
with brass finish are attached to these quality cords. Design
and material used in strict accordance with Specification
MIL-P-642(A). Cords have an identifying label on cord and hot
stamping on plug handle.
SERIES 20Q 3-CONDUCTOR
TELEPHONE-TYPE PATCH CORDS
1/4" diameter plug fingers, black handle, color cable
PART NUMBERING SYSTEM
2
0
Q
2
0
SERIES 18Q
Red handle, brass finger
PLUG
CABLE LENGTH* PLUG
FINGER
FINISH
CABLE
COLOR*
3-cond. Shielded
2-cond.
D - 2'
F - 3'
H - 4'
3-cond. N-Nickel
plated
0-Black
2-Red
5-Green
6-Blue
nylon-
braid
B-Natural
brass
sheath
* Contact Switchcraft for other lengths and colors.
SERIES 18Q: Used in broadcasting, studio recording, sound,
and other applications where space is at a premium. Utilizes
Series 88Q 2-conductor shielded cord, with a Switchcraft 482
Littel-Plug phone plug with red handle (PJ-051) connected to
each end. Shield grounded to sleeve of both plugs, and two
leads wired tip-to-tip, ring-to-ring. Standard cord color: black.
Other lengths and colors: gray, red, green (special order).
Series 18Q provides same or greater number of circuits in a
given space than cords using “Twin-Plug” dual telephone
plugs.
Series 18Q, Plug Type 482
Length
feet (m)
Part
Number
Replacement
Cord Used
0.5 (.152)
18QA18
18QB18
18QD18
18QF18
18QH18
18QK18
18QN18
89QA89
89QB89
89QD89
89QF89
89QH89
89QK89
––
1
2
3
4
6
(.305)
(.610)
(.914)
(1.219)
(1.829)
10 (3.048)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
-
COMBINATION AND MIL TYPE PATCH CORDS 263
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
COMBINATION PATCH CORDS
◊ SERIES CPC103: Standard 2-conductor, 413 Twin-Plug
(.25 " outside diameter finger) on one end with cable-connected
shield to sleeve; two independent tip circuits. Other end
miniature, TT261, TT Twin-Plug (.173" outside diameter finger)
in the same wiring. 6, 10, 15, 20 and 25 foot lengths.
CPC102A
◊ SERIES CPC104: Standard 3-conductor, 414 Twin-Plug
(.25 " outside diameter finger) on one end; miniature
3-conductor, TT263, TT Twin-Plug on other end. Wired at
5-conductor tips-to-tips, rings-to-rings, all sleeves to cable
shield. 6, 10, 15, 20 and 25 foot lengths.
Series CPC Combination Patch Cords provide convenient
interconnections between standard telephone-type jacks
(3-conductor, .25" inside diameter sleeve) and miniature
telephone-type jacks (3-conductor, .173" inside diameter).
Series CPC cords are ideal for connection in telephone, data
processing and other telecommunication applications where
both standard and miniature jacks are available for patching.
Part
Number
Length
6 inches
2 feet
Description
◊CPC102A
◊CPC102D
◊CPC102F
◊CPC102K
◊CPC102N
◊CPC102R
◊CPC102T
◊CPC102U
Standard 3-conductor (483)
telephone plug (.25" outside
diameter finger) on one end;
miniature (253) tini-telephone®
3-conductor (.173" outside
diameter. finger) plug on
3 feet
6 feet
10 feet
15 feet
20 feet
25 feet
FEATURES
1. Rugged, telephone-quality tinsel conductors, with slate gray,
braided thermoplastic jacket with flex relief reinforcements at
point of entry into each plug handle.
other end.(See Schematic).
◊ Special order only; contact factory for price and delivery.
2. Series CPC cords, eliminates the need for a separate
adapter or field-fabricated combination cords.
3. Switchcraft (on special order) can assemble cords of any
practical length.
◊ SERIES CPC101: Standard 2-conductor, 413 Twin-Plug
(.25" outside diameter finger) on one end; miniature,
3-conductor TT253, TT Twin-Plug (.173" outside diameter
finger) on the other end. One twin plug tip to miniature plug
ring. All sleeves connected to cable shield. 6, 10, 15, 20 and
25 foot lengths.
MIL-TYPE 1/4" TWIN PATCH CORDS
SERIES 22Q: For use in telephone patching, broadcasting,
studio recording, high-quality public address systems,
telephone, telecommunications, and instrumentation systems.
Uses 4-conductor shielded cord with Switchcraft Number 414
Twin-Plug® connected to each end. Shield is grounded to
sleeve of each plug and individual leads wired tip-to-tip and
ring-to-ring. Twin-Plug 414 is a 6-circuit plug with electrically
independent tip circuits and ring circuits, with plug fingers
spaced on .625" center to fit standard twin jacks.
A self-aligning feature accommodates errors in jack location.
Standard lengths: 1 feet to 10 feet; standard color: black. Other
lengths and colors are available.
Series 22Q
Part Number
◊22QB22
◊22QD22
◊22QF22
◊22QK22
◊22QN22
Length, feet (m)
1 (.305)
2 (.610)
3 (.914)
6 (1.829)
10 (3.048)
◊ Special order only; contact factory for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
264 MINIATURE TT® BRAIDED PATCH CORDS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MINIATURE TT® BRAIDED PATCH CORDS
TT720
TT740
TT860
Single, 2-Conductor
Single, 3-Conductor
Twin, 3-Conductor
CABLE AND PLUG FINGER COMBINATIONS
3-ConductorTwin Patch Cords. 5-circuit patch cords use two
3-conductor twin Bantam-Type plugs, Switchcraft TT-263, at
each end. Sleeve circuits are wired common, and tinsel
conductors are wired tip-to-tip and ring-to-ring (see schematic).
Polarizing handle notches indicated plug fingers with
interconnected tip and rings. Standard color: black. Other
colors and lengths are available on special order.
2-Conductor Patch Cord. Two-conductor Bantam-Type® plug,
Switchcraft TT251 at each end. Shield (75% coverage) is
grounded to each plug sleeve. Tinsel conductor is wired
tip-to-tip. Standard color: black. Other colors and lengths are
available on special order.
Part Number
◊TT722
Description
Length, feet (m)
1 (.305)
Part Number
◊TT861
◊TT862
◊TT864
◊TT866
◊TT867
◊TT868
◊TT869
Description
Length, feet (m)
0.5 (.152)
1 (.305)
◊TT724
◊TT726
◊TT727
◊TT728
2-conductor single,
brass finish on plug fingers,
black handle and cord.
Identifying label on cord.
2 (.61)
3 (.914)
3-conductor twin,
brass finish on plug fingers,
black handle and cord.
Identifying label on cord.
4 (1.219)
5 (1.524)
6 (1.829)
2 (.61)
3 (.914)
◊TT729
4 (1.219)
5 (1.524)
6 (1.829)
3-Conductor Patch Cord. 3-conductor Bantam-Type plug
(Switchcraft TT253) at each end. Wiring is the same as TT724,
except also has ring-to-ring wiring.
1. For brass fingers, substitute “B” for “N” in part number. Special order only.
2. “0” in part number denotes black handle and cord. Substitute the following
for “0” to specify other color cords:
Part Number
◊TT741
◊TT742
◊TT744
◊TT746
◊TT747
◊TT748
◊TT749
Description
Length, feet (m)
0.5 (.152)
1 (.305)
2–Red
5–Green
6–Blue
◊ Special order only; contact Switchcraft for prices and delivery.
3-conductor single,
brass finish on plug fingers,
black handle and cord.
Identifying label on cord.
2 (.61)
3 (.914)
4 (1.219)
5 (1.524)
6 (1.829)
Part Number
◊TT741N0
◊TT742N0
◊TT744N0
◊TT746N0
◊TT747N0
Description1, 2
Length, feet (m)
0.5 (.152)
1 (.305)
3-conductor single,
nickel-plated plug fingers
(brass available) black
handles and cord.
2 (.61)
3 (.914)
4 (1.219)
CABLE AND PLUG FINGER COMBINATIONS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
MINIATURE TT® MOLDED PATCH CORDS AND TELEPHONE COUPLERS 265
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MINIATURE TT® MOLDED PATCH CORDS (continued)
Part Numbers
Length
feet (m)
Series TT100
Series TT120
◊TT101
◊TT102
◊TT103
◊TT104
◊TT105
◊TT106
◊TT107
◊TT108
◊TT109
◊TT110
◊TT111
◊TT112
◊TT113
◊TT114
◊TT115
◊TT121
◊TT122
◊TT123
◊TT124
◊TT125
◊TT126
◊TT127
◊TT128
◊TT129
◊TT130
◊TT131
◊TT132
◊TT133
◊TT134
◊TT135
0.5 (.152)
1.0 (.305)
1.5 (.457)
2.0 (.610)
2.5 (.762)
3.0 (.914)
4.0 (1.219)
5.0 (1.524)
6.0 (1.829)
7.0 (2.134)
8.0 (2.438)
9.0 (2.743)
10.0 (3.05)
11.0 (3.353)
12.0 (3.658)
TT100 SERIES
TT120 SERIES
Part Numbers
Length
feet (m)
Series TT140
◊TT141
◊TT142
◊TT143
◊TT144
◊TT145
◊TT146
◊TT147
◊TT148
◊TT149
◊TT150
◊TT151
◊TT152
◊TT153
◊TT154
◊TT155
Series TT160
◊TT161
◊TT162
◊TT163
◊TT164
◊TT165
◊TT166
◊TT167
◊TT168
◊TT169
◊TT170
◊TT171
◊TT172
◊TT173
◊TT174
◊TT175
0.5 (.152)
1.0 (.305)
1.5 (.457)
2.0 (.610)
2.5 (.762)
3.0 (.914)
4.0 (1.219)
5.0 (1.524)
6.0 (1.829)
7.0 (2.134)
8.0 (2.438)
9.0 (2.743)
10.0 (3.05)
11.0 (3.353)
12.0 (3.658)
TT140 SERIES
TT160 SERIES
TT-REPLACEMENT CORDS
TELEPHONE COUPLERS
AND ADAPTERS
TELEPHONE PATCH COUPLERS
Series TT700 cords have bronze tinsel conductors covered
with thermoplastic insulation. A braided shield surrounds the
conductors, and the cord is finished with a braided black
thermoplastic jacket. Cord ends are reinforced to accept the
internal threaded end of a TT-Phone Plug® plug. Used as a
replacement cord for Series TT720 and TT740 patch cords,
and used on TT-Twin Plug® plugs, Series TT260, in dual cable
assemblies with 2- and 3-conductor (or combinations) plug
fingers requiring independent tip, ring and sleeve
circuits, and for single cable assemblies where supplementary
cross-over wiring is needed for common tip, ring and/or
sleeve circuits.
TT-couplers interconnect 2- or 3-conductor patch cords
terminated with Switchcraft standard or tini-telephone® plugs,
also similar telephone plugs with compatible finger shape and
dimensions.
Part
Number
Handle
Color
Input ID
Inch (mm)
Output ID
Inch (mm)
Cond.
◊ TT281
◊ TT282
◊ TT283
◊TT284
◊ TT289
361A
Black
Red
2
2
3
3
3
2
3
.175 (4.44)
.175 (4.44)
◊TT701 - Length 6" (152.4 mm).
◊TT709 - Length 6' (1.829 m).
Black
Red
Metal
Metal
Metal
.175 (4.44)
.25 (6.35)
.25 (6.35)
.25 (6.35)
◊ 362A
◊ Special order only; contact factory for prices and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
PATCH CORDS & MOLDED CABLE ASSEMBLIES
266 VIDEO PATCH CORDS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
VIDEO PATCH CORDS
Switchcraft new broadcast series video patch cords are
available in eight base ten color codes. Our cable is a high
performance serial digital 75 Ohm RG59 type. This unique
low-loss cable is ideal for “True” 75 Ohm HD patching as well
as conventional analog signals.
The jacket is made flexible with very low retract memory.
FEATURES:
* Rugged nickel-plated handles knurled for positive
finger grip.
* Flexible black "boot" placed on all cable colors for
more positive grip and cable strain relief.
* Overall flexible jacket for easy coil and low retract memory.
SPECIFICATIONS:
Plug Housing:
Plug Contact Pin:
Cable:
Nickel-plated, copper alloy.
Gold-plated, copper alloy.
Conductor:
22 AWG (19 x 34)
Stranded BC
Midsize Video Patch
VMP
Shield:
Dielectric:
95% BC Braid
.146", 3.70mm, Cellular
(Foam) PE
Jacket:
Nom. Imp:
Matte Finish PVC
75 Ohm
VP
VMP
Video
Patch
Length
(Feet)
Cable
Color
Video
Patch
Length
(Feet)
Cable
Color
Part Numbering System
Video Patch Cords
Video Patch Length (Feet)
Standard .090 WECO
Midsize Video Patch
VP
VMP
Colors
Color Code
Stock Lengths
1'
2'
3'
4'
5'
6'
7'
8'
9'
Black
Red
Orange
Yellow
Green
Blue
=
=
=
=
=
=
=
=
BK
R
O
Y
GN
BL
P
Purple
Gray
Standard .090 WECO
VP
GY
10'
(Custom lengths are available by request)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
PATCH CORDS & MOLDED CABLE ASSEMBLIES
BROADCAST SERIES 267
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
3-CONDUCTOR TT PATCH CORDS:
ANALOG / AES/EBU AUDIO AND RS422 PATCHING
Switchcraft single 3-conductor TT audio patch cords have
now been designed with a low capacitance cable which at 110
Ohms is ideal for digital audio AES/EBU and SMPTE Mtime
code patching.The overall jacket is now flexible in eight colors.
The nickel plated plugs allow for non-tarnishing and the
overmolded handle-boot reduces strain off the cable when
pulled.
Switchcraft dual 3-conductor TT patch cords have also been
redesigned with an overall flexible cable and six colors to
choose from. Like the single TT the dual plugs are nickel
plated and flexible. These cords work with all Switchcraft
TT stereo spaced bays for analog audio and RS422 data
patching.
SPECIFICATIONS
Standard plug terminations are single 3-conductor TT.
Plug handle is molded thermoplastic.
Plugs:
Cable:
Tip Rod, Ring and Sleeve - Copper Alloy
26 AWG (30x40) OFBC, 110 Ohm Low
Capacitance. Jacket is Matte PVC
Dual Bantam TT
TTD
TT
TTD
Tiny
Telephone
Length
(Feet)
Cable
Color
Tiny
Length
Cable
Color
Telephone (Feet)
Dual
Part Numbering System
Video Patch Cords
Video Patch Length (Feet) Cable Color
Single Bantam TT
Dual Bantam TT
TT
TTD
TTD Not available in purple or gray.
Colors
Color Code
Stock Lengths
1'
2'
3'
4'
5'
6'
7'
8'
9'
Black
Red
Orange
Yellow
Green
Blue
=
=
=
=
=
=
=
=
BK
R
O
Y
GN
BL
P
Purple
Gray
GY
Single Bantam TT
TT
10'
(Custom lengths are available by request)
1 Foot (12" inches) equals 3.28 meters
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
NOTES
268
PHONE: 773 792-2700
* Please visit the product pages on our website for the most up-to-date product information
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
MINIATURE KEYBOARD SWITCHES – SERIES 9800 269
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MINIATURE KEYBOARD SWITCHES
IBS MINIATURE SWITCHES
SERIES 98000R
Momentary IBS switches provide cost-effective versatility for a
wide range of electrical/electronic applications including
switching analog and digital signals in business systems,
public address, test instruments, medical, EDP (computer),
input devices and peripheral equipment, local area network,
telecommunication, digital transmission equipment, telephone
systems and attachments and calculators. Convenient
modular design allows quick assembly to PC boards. These
switches are also available in multiple station assemblies
(see page 308).
SPECIFICATIONS
MECHANICAL
Switch Actuation: Momentary
Plunger Travel: .144" (3.66 mm).
Actuation Force (Full Travel): 12-15 ounce (340-425 grams).
Life: 1 million operations.
ORDERING STANDARD SWITCHES
Order switches and pushbuttons by part numbers from table.
PART NUMBERS
ELECTRICAL
UL approved at .25 A @ 28V DC and .125 A @ 125V AC
1
Part No.
982A01R
982A03R
982A06R
Description
Circuit
1-A
Dim. A
MATERIALS
Housing: Molded thermoplastic UL 94V-0
Plunger: Molded thermoplastic UL 94V-0.
Contactors: Copper alloy.
.157"
(4 mm)
Momentary
1-C
2-C
Terminals: Copper alloy, solder-plated.
Contact Surfaces: Gold-plated.
1 Order pushbuttons separately.
ORDERING SPECIAL SWITCHES
Contact your Switchcraft representative with full
specifying details.
SPECIAL ORDER FEATURES
• Other circuitry - 1B, 2A or 2B
MOUNTING
Switches have .157" (4 mm) long PC terminals for mounting
on single- or double-sided PC boards up to .094" (2.4 mm)
thick on 0.394" (10 mm) minimum centers in rows or arrays.
0.394" (10 mm) PC terminals available on special order.
Rugged molded-in standoff legs provide stable mounting
and clearance for PC board cleaning.
• Longer terminals - .394" (10 mm) long.
IBS SWITCH CATALOG NUMBERING SYSTEM
98 X X XX D R
SERIES •
◊ D - Make-Before-Break (Shorting Contacts)
98 - 98000R
(Use with 03, 06 circuits only when required.)
MECHANICAL FUNCTIONS •
2 - Momentary
TERMINALS •
• CIRCUITS
A - .157" (4 mm)
◊ B - .394" (10 mm)
01 - 1A
◊ 02 - 1B
03 - 1C*
◊04 - 2A
◊05 - 2B
06 - 2C
◊ Special order only; contact Switchcraft for price and delivery.
* Non-shorting (break-before-make) contacts
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
270
KEYBOARD SWITCH PUSHBUTTONS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TERMINAL FUNCTION BY TERMINAL NUMBER
RECOMMENDED
PC BOARD LAYOUT
(.300 x .100)
First Pole1
Second Pole
Circuit N.O. N.C. Common N.O. N.C. Common
1-A
1-B
1-C
2-A
2-B
2-C
3
-
3
3
-
-
2
2
2
2
2
2
-
-
-
6
-
6
-
-
-
-
4
4
5*
5*
5*
5*
5*
5*
3
2
1
6
5
4
(Component Side)
1
1
-
1
1
3
*Pin 5 is used as a support pin for switch mounting and has no electrical
connection. 1. N.O.= normally open; N.C.= normally close.
KEYBOARD SWITCH PUSHBUTTONS
Pushbuttons designed for IBS switches are available in
white, black, red, blue, and gray. Other colors are available
on special order. Pushbutton faces are concave for operator
convenience and can be mounted either horizontally
or vertically. Pushbuttons must be ordered separately,
but may be factory installed, if desired, at extra cost.
Character
Height
inches (mm)
Horizontal
Mount
(Char. Max.)
HORIZONTAL MOUNT
I
II
4
5
5
3
4
4
1/8" (3.175)
3/32" (2.381)
5/64" (1.984)
LEGE
AREA
Character
Height
inches [mm}
Vertical
Mount
(Char. Max.)
TYPE I
TYPE II
VERTICAL MOUNT
PART NUMBERS
I
II
1
2
3
Type I
Type II
Color
Type I
Type I I
Color
1
2
2
1/8" (3.175)
3/32" (2.381)
5/64" (1.984)
LEGEND
AREA
◊ P2936
◊ P2937
◊ P2938
◊P2939
◊P2940
◊ P2951
◊ P2952
◊ P2953
◊P2954
◊P2955
White
Black
Red
◊ P2941
◊ P2942
◊P2943
–
◊ P2956
◊ P2957
◊P2958
◊P2979
◊P2992
Blue
Gray
Brown
Cream
Tangerine
Yellow
Green
–
◊ Special order only; contact Switchcraft for price and delivery.
LEGENDS
Engraved letters and numbers are available on special order.
A-Z, ON and OFF in Condensed Block typeface are available.
Other custom legends may be supplied (please inquire).
Refer to drawing and chart for legend data.
TYPE I PUSHBUTTON
TYPE II PUSHBUTTON
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
UNISWITCH®® SWITCHES – SERIES US & LUS 271
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
UNISWITCH® SWITCHES
SERIES US - Non-illuminated,
SERIES LUS - Illuminated
Cost-effective Uniswitch switches are lighted or non-lighted
momentary switches featuring snap-in mounting in a single hole
and a choice of solder/screw (#5-40), solder/quick-connect (AMP
FASTON® 110) 60967-1, or stand-off PC terminals. Molded housing
protects internal parts, and bezel functions as built-in escutcheon.
Series LUS accepts T 1-3/4 bi-pin lamps. (Lamps not included.)
®FASTON is a registered trademark of AMP INC.
MOUNTING
“Snap-in” mounting is in .617" (15.67 mm) minimum square hole -
for row or matrix mounting. Panel thickness: .047" (1.19 mm) to
.266" (6.76 mm) maximum. To mount, simply press switch into
panel; “Adjusto-Clip” locking tabs engage panel and hold switch
securely. Behind panel distance is 1.312" (33.32 mm) minimum.
SPECIFICATIONS
Switch Housing: Molded plastic, charcoal gray only.
“Adjusto-Clip”: Copper alloy.
Contactor: Copper alloy plated. Form 1-A rated:
250 mA, 30 W maximum, AC, non-inductive load.
Terminals: Copper alloy, silver-plated.
Pushbuttons: Molded plastic in 8 colors.
Operating Force: 12 - 16 ounce (340-454 grams).
“ADJUSTO-CLIP” MOUNTING
Panel Thickness
Inch (mm)
Panel Thickness
Inch (mm)
Position
Number
Position
Number
SPECIAL ORDER FEATURES
• Other contactor platings.
Min.
Max.
Max.
Min.
• Engraved legends (See page 270).
• Other pushbutton colors.
• “Adjusto-Clips” set to positions 2, 3, 4, or 5.
1*
2
.047 (1.2)
.094 (2.4)
.141 (3.6)
.078 (2.0)
.125 (3.2)
.172 (4.4)
.219 (5.6)
.266 (6.8)
4
5
.188 (4.8)
.234 (6.0)
3
* “Adjusto-Clips” normally installed in this position unless otherwise specified.
PART NUMBERS (Order switches and pushbuttons separately)
PUSHBUTTONS* (Pushbuttons ordered separately from switches.)
Terminal Type/Part Number;
Series US
Terminal Type/Part Number;
Series LUS1
Part Number
P23491
Color
Red
Part Number
◊ P23495
◊ P23497
◊ P23498
◊P234913
Color
White
Solder/ Printed
Solder/
Solder/
Screw Circuit Quick-Connect Screw
Printed Solder/
Circuit Quick-Connect
P23492
Black
Green
Blue
Orange
Yellow
Amber
P23493
US001 US001PC
US001ST
LUS001 LUS001PC LUS001ST
P23494
1. Lamp not included.
◊ Special order only; contact Switchcraft for price and delivery.
* Extra replacement pushbuttons can be ordered separately.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
UNISWITCH® SWITCHES – SERIES BXR
272
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
BOX SWITCH® SWITCHES
SHOWN ACTUAL SIZE
BXR013PC
Rear view, BXR056
Solder Lug/Quick-Connect
Terminals.
Rear view, BXR013PC
PC Terminals.
SERIES BXR
PART NUMBERS
Economical momentary, non-illuminated switches feature
“Adjusto-Clip” snap-lock mounting and selection of switching.
Bezel trims mounting and enclosed construction protects
against dust, dirt, and physical damage. Color pushbuttons
have concave face for positive “feel”.
Pushbutton Color/Part Number
Green
Solder Lug/Quick-Connect Terminals
Circuits
White
Black
Red
◊BXR031
BXR033
BXR036
BXR051
BXR053
BXR056
BXR021
BXR023
BXR026
1-A
1-C
BXR011
BXR013
BXR016
BXR0110
MOUNTING
2-C
2-A + 2-C
Front mount in .620" (15.75 mm) minimum square hole.
Solder lug/quick-connect terminals accept AMP FASTON®
110 terminals; PC terminals fit boards up to .281" (7.14 mm)
thick. “Adjusto-Clip” permits mounting in panels from .047 "
(1.19 mm) to .281" (7.14 mm) thick.
◊BXR0310
◊BXR0510
◊BXR0210
PC Terminals
◊BXR031PC
◊BXR033PC
◊BXR036PC
◊BXR0310PC
◊BXR051PC
◊BXR053PC
◊BXR056PC
BXR0510PC
◊BXR021PC
◊BXR023P
1-A
1-C
◊BXR011PC
◊BXR013P
BXR026PC
◊BXR0210PC
2-C
2-A + 2-C
BXR016PC
◊BXR0110PC
®FASTON is a registered trademark of AMP INC.
◊ Special order only; contact factory for price and delivery.
SPECIFICATIONS
Housing: Molded plastic, charcoal gray only.
Pushbutton: Molded plastic; red, black, green, and
white standard.
“Adjusto-Clip” Mounting Frame: Copper alloy, plated.
Contact Springs: Copper alloy, plated.
Contacts: Integral, copper alloy, plated.
1-A, 1-C, 2-C, or 2-A + 2-C
“ADJUSTO-CLIP” MOUNTING POSITIONS
Panel Thickness Inch (mm)
Position
Number
Maximum
Minimum
1*
2
.047 (1.2)
.094 (2.4)
.141 (3.6)
.188 (4.8)
.234 (6.0)
.094 (2.4)
.141 (3.6)
.188 (4.8)
.234 (6.0)
.281 (7.1)
3
4
Switching: 250 mA, 30 W max., AC, non-inductive load.
Terminals: Copper alloy, silver-plated.
5
* “Adjusto-Clips” normally installed in this position unless otherwise specified.
SPECIAL ORDER FEATURES
• Other contact platings.
• Engraved legends (see page 270).
• Other pushbutton colors.
• “Adjusto-Clips” set to positions 2, 3, 4, or 5.
SCHEMATIC
RECOMMENDED
PC BOARD LAYOUT
PANEL
CUTOUT
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
BUTTON-SWITCH®® & TINI-SWITCH®® – SERIES 903, 913, 923, 933, 950, 960 273
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
BUTTON-SWITCH® SWITCHES
TINI-SWITCH® SWITCHES
903
923
SERIES 903, 913, 923, 933
SERIES 950, 960
Momentary Tini-Switch® switches are miniaturized versions
of Littel-Switch® switches (see page 274 for construction
details). .25 A contacts are intended for low-power switching
where contact resistance is not critical. Red or black pushbuttons,
solder lug terminals and choice of 1-A, 1-B and 1-C switching
is standard.
These small momentary switches are completely enclosed in
rugged metal housing. Front or rear-panel mount types offer
1-A, 1-B, 1-C, or 1-D switching. Red or black pushbuttons and
solder terminals are standard. Series 903 and 913 are front
mount in .469" (11.91 mm) diameter hole in panels up to
.297" (7.54 mm) thick. Series 923 and 933 are rear mount in
.250" (6.35 mm) diameter hole in panels up to .156" (3.96
mm) thick. Mounting hardware is supplied.
MOUNTING
Switches mount from rear in .250" (6.35 mm) diameter hole in
panels up to .094" (2.39 mm) thick. Mounting washers and
locknuts are supplied.
SPECIFICATIONS
Body: Copper alloy, plated.
Pushbutton: Molded red or black plastic, integral with shaft.
Insulation: Rigid plastic.
Springs: Integral contacts, plated.
Ratings: 250 mA, 30 W maximum, AC, non-inductive load.
Solder Terminals: Copper alloy, silver-plated.
Locknuts: Copper alloy, plated.
Series 903, 913: P-1053-1.
Series 923, 933: P-1150-1.
Lockwasher: Series 903, 913: Steel, P-1060-3
Flat Washer: Series 923, 933: Steel, plated, S-1790-1
SPECIFICATIONS
Bushing: Copper alloy, plated.
Pushbutton: Molded plastic, integral with shaft.
Insulation: Rigid plastic.
Springs: Copper alloy.
Contacts: Integral contacts are standard. .25 A, 30 W
maximum, AC, non-inductive load.
Washer: Steel, plated, S17901.
Locknut: Copper alloy, plated, P11501.
SPECIAL ORDER FEATURES
• Other pushbutton colors. • Legends.
SPECIAL ORDER FEATURES
• Other pushbutton colors. • Legends.
PART NUMBERS
PART NUMBERS
Panel Mounting Pushbutton Color/Part Number Circuit
Schematic1
Pushbutton Color/Part Number
Circuit
Schematic
Red
903
Black
913
Red
951
Black
961
1-C
1-D
1-C
1-D
1-A, SPST, (N.O.)
1-B, SPST, (N.C.)
1-C, SPDT
Front
Rear
◊903D
923
◊913D
933
◊952
953
◊962
963
◊923D
◊933D
◊ Special order only; contact Switchcraft for price and delivery.
1. Circuits C or 1-D can be wired for either 1-A or 1-B switching
◊ Special order only; contact Switchcraft for price and delivery.
.453
(11.5)
Series 903 & 913
Series 923 & 933
Series 950 & 960
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
274 LITTEL-SWITCH® SWITCH WS SERIES 100, 100S, 200, 200S
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
®
LITTEL-SWITCH SWITCHES
PART NUMBERS
Pushbutton Color/Part Number
Circuit
Schematic
Red
101
Black
201
1-A, SPST, (N.O.)
1-B, SPST, (N.C.)
1-C, SPDT
◊101S
◊102
◊201S
202
◊102S
103
◊202S
203
101
102
103
◊103S
◊203S
SERIES 100, 100S, 200, 200S
◊ Special order only; contact Switchcraft for price and delivery.
“S” at the end of part number indicates 3H rated fine silver contacts.
Momentary switches feature leaf springs, insulating spacers,
notched insulating washers and plated copper alloy bushing
assembled into a rugged, reliable, long-life switch for limited
space applications. Series 100 and 200 have integral .25 A
contacts intended for low power switching where contact
resistance is not critical. Series 100S and 200S have 3 A
fine silver contact. Red and black pushbuttons, solder lug
terminals and choice of 1-A, 1-B or 1-C switching are
standard. Shaft and pushbutton molded as one piece.
Captive shaft extends through bushing, actuated leaf
springs. Notched phenolic washers insulate springs and
interlock all members, eliminating possibility of springs
shifting. All springs are insulated from bushing.
SPECIFICATIONS
Bushing: Copper alloy, plated.
Pushbutton: Molded plastic, integral with shaft.
Insulation: Rigid plastic.
Springs: Copper alloy.
Contacts: Integral contacts are standard. (Series 100, 200)
.250 A, 30 W maximum, AC, non-inductive load. Riveted
silver contacts (Series 100S, 200S); 3A, 300 W maximum
AC, non-inductive load.
Washer: Steel, plated, S10221.
Locknut: Copper alloy, plated, P10001.
SPECIAL ORDER FEATURES
• Other pushbutton colors.
• Legends.
MOUNTING
Switches mount from rear in panels up to .250" (6.35 mm)
thick in .375" (9.52 mm) diameter holes. Locknuts and
washers are supplied.
• Welded crossbar palladium contacts for dry circuit.
LEGENDS
Switchcraft offers a wide variety of engraved legends on
special order. Contact Switchcraft for details.
SPST (NO) 1-A
SPST (NC) 1-B
SPDT 1-C
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
Hi-D SWITCH® SWITCHES - SERIES H-100, H-100PC, H-200, H-200PC 275
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
HI-D SWITCH® PC MOUNT SWITCHES
SERIES H-100, H-100PC, H-200, H-200PC
Compact, momentary switches mount on .625" (15.87 mm)
centers in rows or matrix arrays and are the same height and
panel size as Switchcraft’s Hi-D Jack. Rugged “box” body
protects contact springs against mechanical damage and
keys them in precise alignment. Precision springs produce
high contact pressure, smoother wear-reducing actuation,
COMPONENT SIDE
SHOWN
and positive “make-break”. Recommended where contact
resistance is not critical.
SERIES H100, H200
PART NUMBERS
MOUNTING
Solder LugTerminals
PCTerminals
Rear of panel mount in .375" (15.87 mm) diameter hole in
panels up to .156" (3.96 mm) thick. Behind panel space:
1.094" (27.79 mm) minimum. Mounting hardware supplied.
Switches with PC terminals mount directly to PC boards,
and may also be panel mounted with threaded bushing.
Schematic
Pushbutton Color/Part Number Pushbutton Color/Part Number
Circuit
Red
Black
Black
Red
H101
◊H102
H103
H201
◊H202
H203
◊H101PC
◊H102PC
H103PC
-
◊H201PC
◊H202PC
H203PC
-
1-A
1-B
1-C
1-D
See Below
◊H103D
◊H203D
SPECIFICATIONS
Switch Housing: Molded plastic.
◊ Special order only; contact factory for price and delivery.
Mounting Bushing: Copper alloy, plated.
Pushbutton/Actuator: Thermoplastic, red or black with
concave face.
Contact Springs: Copper alloy, silver or gold-plated.
Contacts: Integral, 1-A, 1-B, 1-C, or 1-D, 0. 25 A, 30 W
maximum, non-inductive load.
Series H-100, H-200
Contactor: Copper alloy, plated.
Locknut: Copper alloy, plated. P10001 (supplied).
Washer: Steel, nickel-plated. S10221 (supplied).
SPECIAL ORDER FEATURES
• Other pushbutton colors.
• Legends (see page 270).
Series
H-100PC
H-200PC
PART NUMBERS
Schematic
Series DA Button Color
Circuit
A-B
A-B contacts may be externally wired to
provide a 1-C circuit as illustrated below.
◊DA013
◊DA023
◊DA033
◊DA043
◊DA053
◊DA083
Red
Black
Green
Blue
DA-SWITCH SWITCHES
A-B
A-B
SERIES DA
A-B
Enclosed momentary pushbutton switch. Designed to meet
switching requirements of computers, data processors,
ground support systems, machine and process controls, test
equipment and intercoms. Anodized aluminum body protects
White
Yellow
A-B
A-B
switch contacts from dirt, dust and bending during mounting. ◊ Special order only; contact Switchcraft for price and delivery.
Terminals accept AMP Series 53 taper pins. Mount in .375"
(9.5 mm) hole on .531" (13.5mm) centers. Behind panel
depth .938" (23.8mm) minimum.
SPECIFICATIONS
Housing: Aluminum, black anodized.
Button: Thermoplastic, black.
Terminal Base: Thermoset black phenolic.
Terminals: Copper alloy, gold-plated.
Contacts: Integral. 500 mA, 5 W maximum,
non-inductive load.
Contactor: Copper alloy, plated.
Hardware: Supplied with one, ◊P1970 aluminum,
black anodized knurled mounting nut, and one,
P1971 parkerized lockwasher.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
276 CORD-SWITCH® AND CORDETTE® CORD SERIES SWITCHES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
®
®
CORD-SWITCH CORD SWITCHES
CORDETTE CORD SWITCHES
HOUSING
DIA. .687"
(17.5mm)
Series 921
2.125" LONG
(53.98mm)
E903
3" LONG (76.20mm)
SERIES E900, ED900, EP900
SERIES 921
Momentary cord (pendant) switches can be specified with red
or black pushbuttons, 1-C or 1-D switching, solder terminals
and metal handle (Series E900), plastic handle (Series
EP900), or metal handle with clamp and strain relief (Series
ED900).
Momentary, 0.5 A switching combined with 1-piece molded plastic
body qualifies Cordette for all types of commercial and industrial
usage. The 921 has a phono jack receptacle and a phono jack
in handle to fit standard phono plugs. The 921K is molded with
6' (1.8 meter), 2-conductor cable (internal cable clamp).
SPECIFICATIONS
SPECIFICATIONS
(See page 273 for switch specs.)
Body: 921 and 921K - Molded gray plastic with contrasting
trim and gray pushbutton.
SERIES E900, EP900:
Switch Contacts: Integral copper alloy, plated, form
1-A, 0.5 A, 50 W maximum, AC, non-inductive load.
Not recommended for high voltage circuits.
Insulation: Thermoplastic UL 94V-0.
Phono Jack Terminations: (921): Standard phono jack,
similar to 3501FP (see Jacks and Plugs Section).
Housing: Series E900 - Copper alloy, plated.
Series EP900 - Molded black plastic.
Switch Bushing: Copper alloy, plated.
Insulation: Rigid plastic.
SERIES ED900:
Housing: Die-cast zinc, plated.
Switch Body and Insert Bushing: Copper alloy, plated.
Insulation: Rigid plastic.
Cable Relief Bushing: Black thermoplastic rubber.
Pressure Plates: Stainless steel.
Cable Relief Screws: Steel, plated.
SPECIAL ORDER FEATURES
• 1-B, 1-C, or 1-A + 1-B switching.
• Red, green, blue, white or yellow pushbuttons.
• Legends (see page 270).
• Other body colors.
• ST-900 - Custom-molded to any of a large selection of
cables (See Molded Cable Assembly Section). Also many
cable terminations, i.e., phone plugs, extension jacks,
phono plugs, spade lugs, alligator clips, stripped and tinned
leads, etc.
SPECIAL ORDER FEATURES
• Other pushbutton colors. • Custom legends
PART NUMBERS (examples)
Pushbutton
Color/Part Number
Maximum Cable
Outside Diameter
PART NUMBERS
Circuit
1-C
Red
Black
E913
Part Number
921
Description
Cordette switch, phono jack termination.
.375" [9.5 mm]
.375" [9.5 mm]
.250" [6.4 mm]
.375" [9.5 mm]
.375" [9.5 mm]
.250" [6.4 mm]
E903
921K
Same as 921, except with 6' (1.8 meter), 2-conductor
cable with stripped and tinned leads.
ED903
EP903
ED913
EP913
◊E903D
◊ED903D
◊EP903D
◊E913D
◊ED913D
◊EP913D
1-D
◊ Special order only; contact Switchcraft for price and delivery.
SERIES ED900
SERIES 921
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
PUSH-LITE® SWITCHES AND INDICATORS
277
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
®
PUSH-LITE SWITCHES AND INDICATORS
Completely enclosed, lighted pushbutton switches feature
long-life, highly-reliable, leaf-springs. Available with or
without barriers, full or split-face display. Mounts with
clamp-type bracket; no screws, washers or nuts needed. Can
be mounted in vertical or horizontal rows and in matrixes.
Accepts standard T 1-3/4 flange-base lamp (lamp not
furnished with switch) in either 6 V to 28 V rating. Specify
1 lamp for single lamp type or 2 lamps for twin-lamp type
when redundant or split-face lighting is required. Barriers
and colored filter snap-inserts optional (order separately).
Mounting hole (w/o barriers): 1" (25.4 mm) x .875" (22.23
mm); (w/barriers) 1.188" (30.16 mm) x .875" (22.23 mm).
Panel thickness: .125" (3.18 mm) maximum. Behind panel
depth 1.75" (44.45 mm) (minus panel thickness).
MOMENTARY
Housing/
Pushbutton Color
AC Ratings (max.)
non-inductive
Part Number
Switching
Contacts
CIrcuits
Terminals
SINGLE LAMP
PL103205
SPDT
DPDT
4PDT
DPDT
SPDT
DPDT
4PDT
DPDT
4PDT
1-C
2-C
4-C
2-C
1-C
2-C
4-C
2-C
4-C
PL106205
PL112205
Palladium
Silver
Black/White
2 A, 125 V
8 A, 125V
◊PL126205
◊PL403205
◊PL406205
◊PL412205
◊PL706205
◊PL712205
Solder Lug
PC
Gray/White
Black/White
2 A, 125V
2 A, 125 V
Palladium
TWIN LAMP
PL203205
SPDT
DPDT
4PDT
DPDT
SPDT
DPDT
4PDT
SPDT
DPDT
4PDT
1-C
2-C
4-C
2-C
1-C
2-C
4-C
1-C
2-C
4-C
WITHOUT BARRIERS
PL206205
PL212205
Black/White
2 A, 125 V
8 A, 125V
Palladium
Silver
◊PL226205
◊PL503205
◊PL506205
◊PL512205
◊PL803205
◊PL806205
◊PL812205
Solder Lug
2 A, 125V
2 A, 125 V
Gray/White
Black/White
Palladium
PC
PUSH-LOCK/PUSH-RELEASE
Housing/
Pushbutton Color Switching
AC Ratings (max.)
non-inductive
Part Number
Contacts
Circuits
Terminals
SINGLE LAMP
PL103705
PL106705
PL112705
◊PL123705
◊PL126705
◊PL403705
◊PL406705
◊PL412705
◊PL703705
◊PL706705
◊PL712705
SPDT
DPDT
1-C
2-C
4-C
1-C
2-C
1-C
2-C
4-C
1-C
2-C
4-C
2 A, 125 V
8 A, 125V
2 A, 125V
Palladium
Silver
Black/White
4PDT
SPDT
DPDT
SPDT
DPDT
4PDT
SPDT
DPDT
4PDT
Solder Lug
Gray/White
Black/White
Palladium
2 A, 125 V
PC
WITH BARRIERS
TWIN LAMP
◊PL203705
PL206705
PL212705
◊PL226705
◊PL506705
◊PL512705
◊PL803705
◊PL806705
◊PL812705
SPDT
DPDT
4PDT
DPDT
DPDT
4PDT
SPDT
DPDT
4PDT
1-C
2-C
4-C
2-C
2-C
4-C
1-C
2-C
4-C
2 A, 125 V
8 A, 125V
2 A, 125V
2 A, 125 V
Palladium
Silver
Black/White
Solder Lug
PC
Gray/White
Black/White
Palladium
◊ Special order only; contact Switchcraft for price and delivery.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
PUSH-LITE® SWITCHES AND INDICATORS
278
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
PUSH-LITE® SWITCHES AND INDICATORS (continued)
U.L. LISTED, MOMENTARY & PUSH-LOCK/PUSH-RELEASE
Part
Number
Housing/
Pushbutton
AC Ratings (max.)
non-inductive
Action1
Contacts
Circuit
Switching
Listing Terminals
SINGLE LAMP
◊26U1003
◊26U1004
◊26U1007
◊26U1008
M
M
PL/PR
PL/PR
SPDT
DPDT
SPDT
DPDT
8 A, 125 V
8 A, 125V
8 A, 125V
8 A, 125 V
1-C
2-C
1-C
2-C
UL
UL
Silver
Black/White
Solder Lug
UL
UL
TWIN LAMP
◊26U1005
◊26U1006
◊26U1009
◊26U1010
M
M
PL/PR
PL/PR
SPDT
DPDT
SPDT
DPDT
8 A, 125 V
8 A, 125V
8 A, 125V
8 A, 125 V
1-C
2-C
1-C
2-C
UL
UL
UL
UL
Silver
Solder Lug
Black/White
◊ Special order only; contact Switchcraft for price and delivery. NOTE: 1 M = Momentary; PL/PR = Push-Lock/Push-Release
SERIES PL9000 - PL® INDICATORS
Part Number
PL9105
Description
Black housing;
uses 1 or 2 lamps.
White screen.
Create unlimited combinations of rows and/or matrix arrays
with or without Push-Lite switches. A perfect match for front
panel appearance Push-Lite switches - but functions only as
a lighted indicator. Mounts same as Push-Lite switches:
behind panel depth 1.341" (35.55mm) maximum uses
same lamp, color filter, snap inserts, light divider and
optional mounting barriers as Push-Lite® switches.
Same as PL-9105
except gray housing.
◊PL9205
PUSHBUTTON/INDICATOR SCREENS
Series PL500 Pushbuttons/Indicator Screens are available
separately for use with Push-Lite switches or PL Indicators for
in-the-field substitution and/or replacement.
COLOR FILTER SNAP-INSERTS
Translucent plastic filters for special color coding in Push-Lite
switch and PL Indicators. Use with white or clear pushbuttons.
SERIES PL300 - Full Display Color Filters
Part Number
Color
Part Number
Color
Part Number
PL303
PL305
Color
Green
White
Yellow
Red
Green
Blue
PL508
PL512
PL513
Yellow
Clear
PL501
PL503
PL504
PL505
Amber
White
PL308
OPTIONAL MOUNTING BARRIERS
LIGHT DIVIDER
Light divider for Push-Lite switch pushbuttons and PL Indicator
screens; separates lighting from twin lamps. Order light divider for
each switch or indicator specified where split-face lighting is
desired. Order PL551.
Molded plastic barriers separate Push-Lite switches, PL
Indicators, or combinations of Push-Lite switches and PL
Indicators and prevent accidental operation of adjacent
switches. Series PL100: end barrier. Series PL200: center
barrier. Two required between adjacently mounted switches.
Push-Lite switch is shown with two PL102 end barriers
installed.
BASIC SCHEMATIC
Switch circuitry can be described as combinations of basic schematic circuits
as shown below. N.O. means normally open; N.C. means normally closed.
Part Number
PL102
Description
End barrier, black
◊PL111
PL202
End barrier, gray
Center barrier, black
Center barrier, gray
◊PL211
◊ Special order only; contact Switchcraft for price and delivery.
The above are strictly electrical schematics and do not necessarily indicate
relative solder lug positions.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
PUSH-LITE® SWITCHES PART NUMBERING SYSTEM 279
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PUSH-LITE® SWITCHES - PART NUMBERING SYSTEM
P L
SERIES
LAMP & SWITCH
HOUSING COLOR
1 - Single lamp,
Black housing
2 - Twin lamp,
Black housing
3 - Non-illuminated,
Black housing
4 - Single lamp,
Gray housing
CIRCUITRY
03 - 1C
06 - 2C
09 - 3C
12 - 4C
23 - 1C (8A)
26 - 2C (8A)
29 - 3C (8A)
32 - 4C (8A)
ACTION
PUSHBUTTON
COLOR
01 - Red
03 - Green
04 - Blue
05 - White
08 - Yellow
12 - Clear
13 - Amber
PL
2 - Momentary
7 - Push-Lock/
Push-
Release
9 - Momentary
Silent*
5 - Twin lamp,
Gray housing
6 - Non-illuminated,
Gray housing
* Special order only. Contact Switchcraft.
7 - Single lamp,
Black housing
(PC terminals)
8 - Twin lamp,
Black housing
(PC terminals)
OPTIONS
Pushbutton/indicator screens, color filter snap-inserts, mounting
barriers and lighted dividers can be specified separately for sub-
stitution/replacement; order from tables. Also, engraving of leg-
ends is available; contact Switchcraft.
SCHEMATIC
RECOMMENDED PC BOARD LAYOUT
(Component Side)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
PUSH-LITE® SWITCHES – OUTLINE DIMENSIONS
280
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
PUSH-LITE® SWITCHES AND INDICATORS (continued)
OUTLINE DIMENSIONS
PUSH-LITE SWITCHES WITH SOLDER LUGS
PUSH-LITE SWITCHES WITH PC TERMINALS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
PUSH-LITE® SWITCHES – OUTLINE DIMENSIONS 281
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
PUSH-LITE® SWITCHES AND INDICATORS (continued)
OUTLINE DIMENSIONS
SWITCH AND INDICATOR MOUNTING WITH BARRIERS (See Note)
SWITCH AND INDICATOR MOUNTING WITH BARRIERS (SEE NOTE)
NOTE: PANEL OPENINGS FORM MULTIPLE ROW SWITCH MOUNTING
Leave .109" (2.77 mm) minimum width strip between panel-cutouts to assure secure mechanical
mounting of adjacent clamp mounting brackets.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
282 SLIDE SWITCHES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
SLIDE SWITCHES
DESIGN FEATURES
SPECIAL ORDER SWITCHES FOR
Switchcraft slide switches are completely field tested and
proven in electrical/electronic equipment applications.They are
among the highest-quality, lowest-cost slide switches available
to “cost-to-quality ratio” conscious engineers.
Precision slide switches are designed and constructed to meet
or exceed industry standards for reliability, electrical capacity
and life characteristics.
Switchcraft’s slide action switches are ideal for use in critical
military and industrial applications such as: instrumentation,
test and ground support equipment, computers, control
devices. Their attractive styling will enhance the appearance of
modern home entertainment equipment.
CSA APPLICATIONS
The following series of switches (solder lug type) must be
assembled with a fishpaper or phenolic solder guard to be
CSA certified and stamped. Available on special order only.
Series 46000R, 47000R, 46313R, 49000L, 50000L, Solder
guards are not required on these switch series with PC
terminals. However, they can only be supplied with CSA stamp
on special order. Solder guards are not required on
UL only versions. Contact Switchcraft for details.
SWITCH SERIES IDENTIFICATION
Number of
Series
46000
Name
Positions
General Purpose Slide Switches
Tandem Slide Switches
2, 3
UL AND CSA SWITCHES
47000
2; 2 gang
All slide switches in this catalog with part number suffix “E”
are stamped with both UL and CSA marks. Other standard
switches are UL recognized (except as noted) and are
49000
General Purpose Slide Switches
General Purpose Slide Switches
“Tini-Slide” Slide Switches
“Tini-Slide” Slide Switches
Miniature Slide Switches
European Line Voltage
3
2
2
3
4
2
50000
56200, C56200
56300, C56300
C63000
stamped with the
mark.
EPS1, EPS2
EPS3, EPS4
Selector Switches
TERMINALS
Series
Description
Silver-plated terminals are standard; gold-plated terminals are
available on special order. Printed circuit terminals in varying
lengths from (“A” dimension) .078" (1.98 mm) to 1.25" (31.75
mm) are available on special order. Reference “A” on all switch
drawings indicates length of PC terminals. See
illustration and notes below for selection of terminals.
46000E
Note 1
46000R
Notes 1, 3
Note 1
47000E
47000R
Notes 1, 3
Note 1
49000
50000
Notes 1, 3
See page 288
See page 290
See page 290
See page 291
56000, C56000
62000, C62000
C63000
EPS1, EPS2
EPS3, EPS4
NOTES:
1. PC terminal “A” dimension is:
Standard - .078" (1.98)
Special - .109" (2.77), .141" (3.58), .160" (4.06), .180" (4.57), .203" (5.16),
.234" (5.94), .266" (6.76), .313" (7.95), .391" (9.93), .400" (10.16),
.438" (11.12), .484" (12.29), .609" (15.47), .688" (17.48), .719" (18.26),
.813" (20.65), .969" (24.61), 1.25" (31.75)
2. .078" (1.98) “A” dimension is not recommended for momentary switches
unless clearance hole for return spring is provided in PC board.
3. Accepts up to #14 AWG wire.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
SLIDE SWITCHES 283
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
SLIDE SWITCHES (continued)
DESIGN FEATURES (continued)
PART NUMBER SUFFIX LETTERS
SWITCHING
“Double-wipe” slide switches incorporate special “Sliders” to
assure wiping action of terminals. This exclusive double
wiping action reduces the possibility of oxidation or increased
contact resistance. These longer lasting, self-cleaning sliders
provide a switch with greater dependability.
Letter
Description
B
Special pushbutton type. Depressing (rather than
sliding) pushbutton operates the switch.
Tandem switch with 2 knobs; knobs are internally
(mechanically) coupled.
C
The “Sliders”, which are formed with precision dies, are
U-shaped to give bifurcated contact reliability. “Sliders” are
made from a special copper alloy, plated, which assures
uniform tensile strength over the entire life of the switch.
Switch terminals are copper alloy, plated. Plating completely
encloses the contact area in a silver jacket for positive and
continuous electrical operation. A tarnish preventive lubricant
coating is applied to the sliders and terminals.
3-position switch having internal dust shield.
D
E
F
Molded terminal board.
Flush actuator. Screwdriver slotted. All series except
47000 series marked standard as “115/230.” Other
markings available as special order. Call
Switchcraft for details.
L
Locking action.
Momentary (non-lock) action.
M
NOTE: “double-wipe” action on all switches except
Series 62000 and 46256LFR.
Switch has external plunger.
P
R
Current ratings up to 3A, 125V AC. Phenolic
terminal board.
Shorting type contacts, make-before-break.
3-position switches only. One side of neutral has
locking action; the other side has momentary action.
S
T
BASIC SCHEMATIC CHART
Standard arrangement is “Break” before “Make” (non-shorting).
“Make” before “Break” (shorting) is available on special order
in Series 46000R, 47000R, 49000 and 50000.
BASIC SCHEMATIC CHART
KNOBS KNOB HEIGHTS Inches (mm)
Series
46000E
46000R
*
◊
◊
◊
◊
◊
◊
◊
*
◊
◊
◊
◊
◊
◊
◊
◊
◊
◊
(1)
46300R
47000
◊
*(1)
◊
◊
◊
◊
◊
◊
◊
◊
◊
◊
◊
◊
*
◊
◊
◊
◊
◊
*
◊
◊
◊
◊
*
(2)
◊
◊
◊
49000
◊
◊
◊
50000
◊
◊
*
◊
56200
◊
◊
*
◊
◊
◊
◊
56300
◊
◊
◊
◊
*
◊
◊
◊
62000 (2)
C63000
EPS (3)
*
*
*
* Standard, ◊ Special order
1. Flush screwdriver actuator is standard on numbers 46206LFE, 46206LFR, 46256LFE, 46256LFR and 47227LFR.
2. Numbers 62206L and C62206L have side knob actuator (rather than top knob) standard.
3. EPS switches not available with raised knobs.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
284
GENERAL PURPOSE SLIDE SWITCHES – SERIES 46000 - 2 POSITION
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
46206LR
46206LFR
GENERAL PURPOSE SLIDE SWITCHES
SERIES 46200E, 46200R - 2 POSITION
PART NUMBERS
SPECIFICATIONS
Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive. (Also
1.5A, 250V non-inductive for Series 46000E only). Numbers
46206LFR and 46256LFR are not designed to switch more than
125V, and must be set to desired position before power is applied
to equipment, appliance, etc.
Listings: UL recognized and CSA certified. Series 46000R
switches are CSA marked on special order only. Ref. UL
card E40668 and CSA File 28260.
Series
46200E
Series
46200R
Description
SPST NO, Momentary
SPST, Locking
Schematic*
◊46201ME
◊46202LE
◊46202ME
46203LE
◊46203LSE
◊46203ME
46204LE
◊46204ME
46206LE
46206LFE
◊46206LSE
◊46206ME
-
46201MR
I
46202LR
II
◊46202MR
46203LR
SPST NC, Momentary
SPDT, Locking
II
III
◊46203LSR
46203MR
SPDT, Locking
III Shorting
SPDT, Momentary
DPST, Locking
III
Housing: Steel, plated.
Knob: Black thermoplastic.
◊46204LR
◊46204MR
46206LR
2-I
DPST NO, Momentary
DPDT, Locking
2-I
Terminals and Slider Contacts: Copper alloy, plated.
Insulation: Series 46000E: Thermoplastic.
Series 46000R: Rigid plastic.
Temperature Range: -4°F to +158°F (-20°C to +70°C).
Dielectric Strength: 1 kV rms @ sea level.
Insulation Resistance: 1 k MΩ minimum.
2-III
2-III
2-III Shorting
2-III
2-III
V
46206LFR
◊46206LSR
◊46206MR
◊46206MP
46256LFR
◊C46203LR**
◊C46204MR**
C46206LR**
DPDT, Locking (1)
DPDT, Locking
DPDT, Momentary
DPDT, Momentary*
DPDT, Locking (1) (2)
SPDT , Locking
46256LFE
-
SPECIAL ORDER FEATURES
1. .344" (8.74 mm) high knobs are standard; other heights
available. See chart on page 283.
2. #6-32 and #4-40 tapped flanges for mounting available
(except 46204MBR and 46206MP).
III
-
DPST NO, Momentary
DPDT, Locking
2-I
-
2-III
2-III
-
C46206LFR** DPDT, Locking (1)
3. P. C. terminals.
* Contacts are non-shorting, except as noted.
4. Plunger length on 46206MP - Other lengths from
.125" (3.18 mm) to 1.844" (46.84 mm) long.
5. Series 46000R switches are CSA marked on special
order only. See page 282.
** "C" prefix specifies .078 inch (1.98) PC terminals, no mounting ears.
(1) Recommended for power selection, 115-230 legend, screwdriver slotted
actuator minimizes tampering.
(2) Shorting bars installed.
◊ Special order only; contact Switchcraft
46206MP
46206LR
46206LE
46256LFE
46206LFR
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
GENERAL PURPOSE SLIDE SWITCHES – SERIES 46000 - 3 POSITION 285
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
GENERAL PURPOSE SLIDE SWITCHES (continued)
SERIES 46300R - 3-POSITION
Three-position switches offer locking-locking, momentary-
momentary and locking-momentary action for talk-listen
applications. All switches have positive center detent and
shutter type dust cover to prevent dirt and dust from
contaminating switch contacts.
SPECIFICATIONS
Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive.
Listings: UL recognized, card E40688 CSA certified
(marked) switches available on special order only.
See page 282.
Housing: Steel, plated.
Detent Spring: Music wire.
Shim: Black vulcanized fiber.
Knob: Black thermoplastic.
Series 46300R
Terminals & Slider Contacts: Copper alloy, silver-plated.
Insulation: Phenolic.
Temperature Range: -4°F to +158°F (-20°C to +70°C).
Dielectric Strength: 1 kV rms @ sea level.
Insulation Resistance: 1 k MΩ minimum.
SPECIAL ORDER FEATURES:
1. .344" (8.74 mm) high knobs are standard; other heights
available. See chart on page 283.
2. Series 46000R switches are CSA marked on special
order only. See page 282.
PART NUMBERS
Action Positions*
Part**
Circuitry
SPTT
SPTT
SPTT
DPTT
DPTT
DPTT
Schematic
#1
L
Center
#2
L
Number
46311LDR
◊46311MDR
◊46311TDR
46313LDR
46313MDR
46313TDR
VI
VI
L
L
L
L
L
L
M
L
M
M
L
VI
2-VI
2-VI
2-VI
L
M
L
M
M
◊ Special order only; contact Switchcraft for price and delivery.
* L - Locking; M - Momentary.
** "C" prefix specifies .078" (1.98) PC terminals, no mounting ears.
SOLDER GUARDS
Insulating Solder Guards, P-2370 (2-position); and ◊P-2633
(3-position); slip over solder lug terminals and prevent solder
splashes from entering interior (contact area) of switch. Made
of fishpaper .01" (.25 mm) thick, Solder Guard slips over
terminals quickly and easily. Precision punched slots lock
onto terminals, and rectangular shape conforms with
dimension of switch terminal board. Minimizes costly
production line rework.
Solder Guards can be used on:
• General Purpose, Series 46000R
• Tandem, Series 47000R.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
286
GENERAL PURPOSE SLIDE SWITCHES – TANDEM SERIES 4700
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
GENERAL PURPOSE SWITCHES - TANDEM
47206LCE
47206LR
47227LFR
SERIES 47200E, 47200R - 2 POSITION
Space saving, two-gang slide switches are contained in one
housing. Switching is locking type with non-shorting contacts.
PART NUMBERS
SPECIAL ORDER FEATURES
Series
47200E
Series
47200R
◊47202LR
◊47203LR
◊47204LR
◊47204LCR
◊47206LR
◊47206LCR
◊47215LR
◊47215LCR
◊47217LR
◊47217LCR
◊47221LR
◊47221LCR
◊47227LFE
◊47227LFR
Description
SPST - SPST
SPDT - SPDT
DPST - DPST
DPST - DPST
DPDT - DPDT
DPDT - DPDT
SPST - SPDT
SPST - SPDT
SPST - DPST
SPST - DPST
SPDT - DPST
SPDT - DPST
DPDT - DPDT
DPDT - DPDT
Schematic
1. .344" (8.74 mm) high knobs or flush knobs are standard,
depending on switch selected; other heights available.
See chart on page 283.
2. Series 47000R switches are CSA marked on special
order only. See page 282.
◊47202LE
II
II
◊47203LE
III
III
◊47204LE
2-I
2-I
2-I
2-I
◊47204LCE
◊47206LE
2-III 2-III
2-III 2-III
SPECIFICATIONS
◊47206LCE
Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive,
(Also 1.5A, 250V non-inductive for Series 47000E only.)
47227LFR switches are not designed to switch more
than 125V, and must be set to desired position before
power is applied to equipment or appliance.
Listings: UL recognized, card E40668, and CSA certified
(card 28260). Series 47000R switches are CSA certified
on special order only. See page 282.
-
-
-
-
-
-
II
III
II
III
II
2-II
2-II
2-II
2-II
II
III
III
2-V
2-V
Housing: Steel, plated.
Knob: Black thermoplastic.
Terminals and Slider Contacts: Copper alloy, silver-plated.
Insulation: Series 47000E - Thermoplastic.
Series 47000R - Rigid plastic.
Temperature Range: -4°F to +158°F (-20°C to +70°C).
Dielectric Strength: 1 kV rms @ sea level.
Insulation Resistance: 1 k MΩ minimum.
NOTE: Series 47200E and 47200R - All switches have two independent
knobs, except:
• 47204LE, 47204LCR, 47206LCE and 47206LCR have one knob and
one flush actuator.
• 47227LFE and 47227LFR have internal mechanical coupling and
two flush, slotted screwdriver actuators.
◊ Special order only; contact Switchcraft
47206LR
47206LCE
47227LFR
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
GENERAL PURPOSE SLIDE SWITCHES –SERIES 49000 AND 50000 287
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
GENERAL PURPOSE SLIDE SWITCHES (continued)
SERIES 49300 - 3 POSITION
Large, heavy duty, three and four pole slide switches. Standard
mounting clearance is .141" (3.58 mm). Series 49300L,
non-shorting contacts; Series 49300LS, shorting contacts.
SPECIFICATIONS
Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive.
Listings: UL recognized (card E40668); CSA certified
(marked) switches available on special order only.
See page 282.
Housing: Steel, plated.
49331L
Detent Shim: Copper alloy.
Knob: Black thermosetting plastic.
PART NUMBERS
Terminals and Slider Contacts: Copper alloy, silver-plated.
Insulation: Rigid plastic.
Temperature Range: -4°F to +158°F (-20°C to +70°C).
Dielectric Strength: 1 kV rms @ sea level.
Insulation Resistance: 1 k MΩ minimum.
Part
Number
UL & CSA
Listing
Yes
No
Description
3-PDT, Locking*
3-PDT, Locking*
3-PTT, Locking
3-PTT, Locking
4-PDT, Locking*
4-PDT, Locking*
4-PTT, Locking
4-PTT, Locking
Schematic
3-VII
◊49309L
◊49309LS
◊49329L
◊49329LS
◊49312L
◊49312LS
◊49331L
◊49331LS
3-VII
Yes
No
3 -VI
SPECIAL ORDER FEATURES
1. .5" (12.7 mm) high knobs are standard; other heights
available. See chart on page 283.
2. #4-40 extruded and tapped mounting holes available.
3. Series 49300L switches are CSA marked on special
order only. See page 282.
3 -VI
Yes
No
4-VII
4-VII
Yes
No
4 -VI
4 -VI
* 3rd position is off.
◊ Special order only; contact Switchcraft.
SERIES 50200 - 2 POSITION
A larger 2 position “double wipe” slide switch offering three
and four poles of switching and locking or momentary action.
Series 50200L and M, non-shorting; Series 50200LS and
MS, with shorting contacts.
SPECIFICATIONS
Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive.
Listings: UL recognized (card E40668); CSA certified (card
28260). Series 50200L switches are CSA marked on special
order only. See page 282.
50209L
Housing: Steel, plated.
Detent Shim: Copper alloy.
Knob: Black thermosetting plastic.
Terminals and Slider Contacts: Copper alloy, plated.
Insulation: Rigid plastic.
PART NUMBERS
Part
Temperature Range: -4°F to +158°F (-20°C to +70°C).
Dielectric Strength: 1 kV rms @ sea level.
Insulation Resistance: 1 k MΩ minimum.
Number
◊50207L
◊50207M
◊50208L
50209L
Description
3PST - Locking
Schematic
3-I
3-I
4-I
3PST, N.O. Momentary
4PST, Locking
SPECIAL ORDER FEATURES
1. .344" (8.74 mm) high knobs are standard; other heights
available. See chart on page 283.
2. 50212LF available with flush, screwdriver slotted
actuator and has 4 PDT locking action.
3. Extruded and tapped 4-40 or 6-32 holes available.
4. Series 50200L switches are CSA marked on special
order only. See page 282.
3PDT, Locking
3PDT, Momentary
4PDT, Locking
3-III
3-II
◊50209LS
◊50209M
◊50209MS
50212L
4-III
◊50212LS
◊ Special order only; contact Switchcraft.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
288 MINIATURE SLIDE SWITCHES – SERIES 56200 AND C56200
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
SPECIAL ORDER
MINIATURE SLIDE SWITCHES
56206L1
C56206L2
C56206L2
SERIES 56200, C56200 - 2 POSITION
SPECIAL ORDER FEATURES
“Tini-Slide” slide switches have Exclusive SNAP SLIDE lifting
and wiping action. This unique, positive action combines the
best features of “snap” and “slide” movements into the design
of a superior switch. Pitting, burning and contamination are
minimized. Contacts lift through an air gap, drop on stationary
contacts, and slide, wiping themselves clean. Subminiature
size is ideal where useable space is at a premium.
1. .2" (5.08 mm) high knobs are standard; other heights
available on special order. See page 283.
2. Red and white knobs available.
3. Mounting flanges with .1" (2.54 mm) diameter holes on
C56206L1 or C56206L2. Flange holes tapped #4-40 on
56206L1 or 56206L2 (where production quantities warrant).
4. UL stamped on special order.
SPECIFICATIONS
Contact Ratings: 0.5A, 125V AC or DC, non-inductive.
Minimum life at rated load 6000 cycles. Resistance after
6000 cycles at rated load is 50 milliohms maximum.
Terminals: PC Type - silver-plated. Each terminal has
standoff shoulder for stable mounting and space for board
clearance.
Mounting: Flange, (56206L1 and 56206L2) - .1" (2.54 mm)
holes for screw or mounting rivet. PC - Direct mounting to PC
boards up to .093" (2.36 mm) thick.
PART NUMBERS
Part
Number
Dimension "B"
Inch (mm)
Description
DPDT, Locking
DPDT, Locking
DPDT, Locking
DPDT, Locking
Schematic
2-III
56206L1
56206L2
C56206L1
C56206L2
-
-
2-III
.573 (14.55)
.352 (8.94)
2-III
Knob: Molded thermoplastic (UL 94V-1).
Terminal Board: Molded thermoplastic (UL 94V-0).
Terminals: Copper alloy, silver-plated.
2-III
Contact Sliders: Copper alloy.
Temperature Range: -4°F to +158°F (-20°C to +70°C).
Dielectric Strength: 1 kV rms @ sea level.
Insulation Resistance: 1 k MΩ minimum.
C56206L1 & 2
56206L2
56206L1
RECOMMENDED PC BOARD
LAYOUT (Component Side)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
MINIATURE SLIDE SWITCHES – SERIES 56300 AND C56300 289
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MINIATURE SLIDE SWITCHES (continued)
C56313L1
C56313L2
56313L1
56313L2
Dielectric Strength: 1 kV rms @ sea level.
Insulation Resistance: 1 k MΩ minimum.
SERIES 56300,C56300 - 3 POSITION
Series 56300 “Tini-Slide” switches provide ultra-reliable
3-position switching. They afford maximum space savings in
military, industrial and consumer applications, such as
instrumentation, test and ground support equipment,
appliances, computers, and control devices.
SPECIAL ORDER FEATURES
1. .187" (4.75 mm) high knob is standard; Other heights
available on special order. See page 283.
2. Red and white knobs available.
3. Two mounting variations:
SPECIFICATIONS
a. Tapped #4-40 holes on mounting ears for machine
screws.
b. Mounting ears with .1" (2.54 mm) diameter holes on
switches with PC terminals.
Contact Ratings: 0.5A, 125V AC or DC, non-inductive.
Minimum switch life is 6000 cycles. Resistance after
6000 cycles at rated load is 50 milliohms maximum.
Terminals: Solder Lugs - 56313L1 with wrap around notch;
56313L2 with solder lug. PC - .585" (14.68 mm) “B”
dimension and .364" (9.24 mm) “B” dimension.
Mounting: Mounting ears for mounting to chassis of panels
with screws or rivets (not supplied). Switches with PC
terminals have stand-off shoulders for solid PC mount.
Knob: Molded thermoplastic (UL 94HB).
PART NUMBERS
Part
Number
Dimension “B”
Inch (mm)
Description
DPTT, Locking
DPTT, Locking
DPTT, Locking
DPTT, Locking
Schematic
2-VI
56313L1
56313L2
C56313L1
C56313L2
-
Terminal Board: Molded thermoplastic (UL 94V-0).
Terminals: Copper alloy, silver-plated.
Contact Sliders: Copper alloy.
-
2-VI
.585(14.85)
.364 (9.24)
2-VI
2-VI
Temperature Range: -4°F to +158°F (-20°C to +70°C).
56313L1 & L2
56313L1
56313L2
RECOMMENDED PC BOARD
LAYOUT (Component Side)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
290
MINIATURE SLIDE SWITCHES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
®
SIDE-SLIDE /MINIATURE SLIDE SWITCHES
SERIES 62200 - 2 POSITION
2-position locking action with side knob actuator. Side
knob provides low profile, saving space on PC boards.
SPECIFICATIONS
Contact Ratings: 0.5A, 125V AC or DC.
PC Terminals: Copper alloy, silver plated.
Housing: Steel, plated.
RECOMMENDED PC BOARD
LAYOUT (Component Side)
62206L
Knob: Molded thermoplastic.
Terminal Board: Rigid plastic.
Sliders: Copper alloy, plated.
Dielectric Strength: 1000 V rms.
Insulation Resistance: 1 k MΩ minimum.
SPECIAL ORDER FEATURES
1. Various knob heights available on special order.
2. Various lengths available on special order.
PART NUMBERS
Part
Number
Description
Schematic
2-III
◊62206L
DPDT, with mounting ears, Locking
DPDT, without mounting ears, Locking
C62206L
2-III
◊ Special order only; contact Switchcraft.
MINIATURE SLIDE SWITCHES
SERIES C63200 - 2 POSITION, 4 POLE
C63200 switches designed for applications, such as:
instrumentation, test and ground support equipment, computers,
data communications and medical equipment. PC mounting on
standard industry .100" (2.54 mm) x .200" (5.08 mm) centers.
Mounts on PC boards up to .093" (2.36 mm) thick. Molded
black thermoplastic knobs. Terminals are copper alloy, gold-
plated on contact area, tinned on terminal end.
Part Number Action Switching Ratings
Schematic
Terminals
300mA
max.
30V AC
C63212L Locking
4PDT
4-III
Copper alloy,
gold-plated
on contact
area, tinned
on terminal
end
RECOMMENDED
PC BOARD LAYOUT
(Component Side)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
EUROPEAN LINE VOLTAGE SELECTOR SWITCHES 291
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EUROPEAN LINE VOLTAGE SELECTOR SWITCHES
RED ACTUATOR
RED ACTUATOR
EPS1PC3
EPS2PC2
EPS3SL1
EPS4PC3
PART NUMBERS
Series EPS1
SERIES EPS1, EPS2, EPS3, EPS4 - 2 POSITION
European Power Selector Switches are designed for quick,
easy programming/selection of 115V-230V primary power.
These switches provide OEM designers with an excellent
selection of PC and solder lug terminals and ratings up to
10A, 125V AC rating for electrical/electronic equipment and
systems headed for the INTERNATIONAL marketplace.
Part
Number
Dimension “B”
Inch (mm)
Terminals
Straight PC
Schematic
2-III
◊EPS1PC1
◊EPS1PC2
EPS1PC3
EPS1SL1
.681 (17.297)
Straight PC
.719 (18.263)
2-III
Right-Angle PC
Solder Lugs
-
-
2-III
HOUSING AND ACTUATOR
2-III
Switches have positive, double detents for “sure” locking
into position. Screwdriver slot actuator virtually eliminates
the possibility of accidental operation and minimizes
tampering. Molded-in legends are: 115-230V. Terminals
are staked into housing.
◊ Special order only; contact Switchcraft.
Series EPS2
Part
Dimension “B”
Inch (mm)
Number
EPS2PC1
EPS2PC2
EPS2PC3
Description
Straight PC
Schematic
2-III
SPECIFICATIONS
.730 (18.542)
.768 (19.507)
-
Contact Ratings: EPS1, EPS2 - 2A, 250V AC and 4A,
125V AC. EPS3, EPS4 - UL and CSA - 10.1A, 125V; 5A,
250V. VDE - 10A, 250V.
Straight PC
2-III
Right-Angle PC
2-III
Listings: UL and CSA recognized, UL card E40668;
CSAcard 28260. 2A, 250V AC is VDE listed, VDE #13707
(for European applications). Designed to conform to
requirements of CEE (International Commission on Rules
for the Approval of Electrical Equipment, Publication 24)
and the IEC (International Electrotechnical Commission).
Housing: Molded black glass-reinforced plastic.
Actuator and Cover: Molded thermoplastic.
Terminals: Copper alloy, silver-plated.
Series EPS3
Part
Number
Dimension “B”
Inch (mm)
Terminals
Straight PC
Schematic
2-III
EPS3PC1
EPS3PC2
EPS3PC3
EPS3SL1
.681 (17.297)
Straight PC
.719 (18.263)
2-III
Right-Angle PC
Solder Lugs
-
-
2-III
Slider Contacts: EPS1, EPS2 - Bi-Metal, silver on copper
alloy. EPS3, EPS4 - Copper alloy with silver cadmium
oxide inlay.
2-III
Temperature Range: -4°F to +158°F (-20°C to +70°C).
Dielectric Strength: 2kV rms @ sea level.
Insulation Resistance: 1 k MΩ minimum.
Series EPS4
Part
Number
Dimension “B”
Inch (mm)
Description
Straight PC
Schematic
2-III
SPECIAL ORDER FEATURES
EPS4PC1
EPS4PC2
EPS4PC3
.730 (18.542)
.768 (19.507)
-
Series EPS actuators having legends other than
115V and 230V are available on special order.
NOTE: Contact Switchcraft for details.
Straight PC
2-III
Right-Angle PC
2-III
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
292 EUROPEAN LINE VOLTAGE SELECTOR SWITCHES
EUROPEAN LINE VOLTAGE SELECTOR SWITCHES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
EUROPEAN LINE VOLTAGE SELECTOR SWITCHES (continued)
EPS1PC3 - Long, right-angle PC
EUROPEAN
PANEL/CHASSIS
MOUNT
terminals and flanges for com-
bined mounting to PC board
and panel/chassis.
LINE VOLTAGE
SELECTOR
SWITCH
EPS1PC1 - Short, PC terminals and
flanges for combined mounting to
PC board and panel/chassis.
PC MOUNT
EPS2PC2 - Long, PC terminals for
direct mounting to PC board only.
EPS2PC3 - Long, right-angle
PC terminals for combined PC
terminating and mounting.
EPS1SL1 - Solder lug
terminals and mounting flanges
for panel/chassis mount.
PANEL OPENING DATA
SERIES EPS1
EPS1PC3
EPS2PC1 & PC2
SERIES EPS2
RECOMMENDED PC
BOARD LAYOUT
(Component Side)
EPS1PC1 & PC2
EPS2PC3
EPS1SL1
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
EUROPEAN LINE VOLTAGE SELECTOR SWITCHES 293
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
EUROPEAN LINE VOLTAGE SELECTOR SWITCHES (continued)
RECOMMENDED PC
BOARD LAYOUT
(Component Side)
EPS3PC1 & EPS3PC2
EPS4PC3
PANEL OPENING DATA
EPS3SL1
SERIES EPS4
EPS4PC1 & EPS4PC2
SERIES EPS3
EPS3PC3
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
294 LEVER SWITCHES – DESIGN FEATURES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
LEVER SWITCHES
DESIGN FEATURES
High quality, field-proven Switchcraft® lever switches are available
in a wide selection of illuminated and non-illuminated versions,
2- and 3-position, locking and non-locking functions can be
provided. Switchcraft illuminated lever switches feature choice of
colors, wide selection of switching circuits, single lamp
illumination and ease of mounting and lamp replacement.
To avoid ordering special switches it is possible to use a larger
standard circuit, providing the circuit fulfills your requirements.
Circuit Form K is widely used in talk-listen (intercom) function
applications. In normal position (neutral), switch does not
contact upper or lower contact spring. During typical
operation, lever is held in upper (momentary) position while
speaking. Releasing lever allows switch to return to neutral.
For listening, lever is moved to down (locking) position. Lever
is manually returned to neutral when finished.
All switches utilize nickel silver springs without “form” at point
of flexing to insure long spring life. The springs are assembled
into a conventional stack assembly, insulated from each other
by phenolic spacers with plastic tubing press-fit through each
stack, insuring correct alignment of contacts and providing
high insulation resistance.
SCHEMATIC
DIAGRAM
FORM K
APPLICATIONS
Various front panel switching applications on computers,
telecommunications systems, industrial control equipment,
intercoms, ground support systems, medical electronics,
scientific instruments, broadcast consoles and test
instrumentation.
ORDERING STANDARD SWITCHES
Order lever switches by part number from pages 295
through 298.
LAMP DATA
Lever-Lite® switches use T-1 3/4 flange base lamps which
are available from commercial sources.
CONTACTS
Below are listed the basic contacts available on switches in
this catalog:
1. Fine silver contacts rated at 2A, 200W (maximum)
AC non-inductive load.
2. Welded cross bar silver contacts rated at 3A,
300W (maximum) AC non-inductive load.
3. Welded cross bar palladium contacts rated at 2A,
200W (maximum) AC non-inductive load.
4. Welded cross bar gold alloy contacts rated at up to 1A,
100W (maximum) AC non-inductive load.
(Dry circuit applications.)
ORDERING SPECIAL SWITCHES
Lever Switches
Should you desire a special version of any Switchcraft® lever
switch not shown here, we require the following information:
1. Switch series.
2. Number of positions.
3. Mechanical action (locking, non-locking, etc.).
4. Contact configuration for each position.
5. Type of contact material.
6. Color sequence (Lever-Lite III).
UL RECOGNIZED LEVER SWITCHES
Seven series of Switchcraft lever switches are UL recognized.
These switches are available on special order to fulfill your
switching requirements which specifically require UL listed
switching devices.
BASIC CONTACT FORMS
Below are the basic contact forms available standard on all
Switchcraft Lever Switches. Specify circuits needed by
referring to the letter identification and respective location on
frame. See dimensional drawings for stack switch location.
1. Series 12000
2. Series 41000
NOTE: Refer to switch series in this catalog for full mechanical
specifications and additional standard and special features.
A
B
C
D
E
F
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
LEVER-LITE® ILLUMINATED LEVER SWITCHES – SERIES 84000
295
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
LEVER SWITCHES (continued)
LEVER-LITE® III
SERIES 84000 - ILLUMINATED LEVER SWITCHES
Lever-Lite® III illuminated lever switches are designed for
front-of-panel mounting, relamping, terminating, color
changes and removal. A minimum of time is required to install
singly, in rows, or in matrix arrays to meet a wide variety of
switching applications. 2- and 3-position types are available in
non-locking functions. Mounts on .875" (22.22 mm) horizontal
centers or 1.5" (38.1 mm) vertical centers. Talk-listen
(intercom) function is also available. Illumination technique
provides a different color for each lever position.
ILLUMINATION
A single internal lamp provides brilliant lever lighting in any
color required. Standard factory installed color filters are
provided as follows: Series 84000, Multi-Color Illumination
2-position - Amber (neutral position); green (down position).
3-position - Red (up position); amber (neutral position); green
(down position). One-color (all positions) and non-illuminated
switches can be specified on special order. Switchcraft will
install filters for non-standard illumination requirements at
nominal cost on special order.
LAMPS
Standard T 1-3/4" midget flange-base lamps (not supplied)
are available in voltages up to 28V.
SPECIAL ORDER FEATURES
1. Talk-Listen (Intercom) function.
2. Welded cross bar gold alloy for dry circuit and silver
contacts are available. See page 294.
MOUNTING
Grasp fingernail slots on opposite sides
of escutcheon and snap out. Next, grasp
lever and pull lever assembly free. Insert
switch into panel hole.
Turn two internal screws clockwise with
screwdriver to securely mount switch
to panel.
Replace lever assembly and “snap”
escutcheon into place. Installation
complete!
Lever-Lite III switches are designed for simplified lamp installation and replacement,
and color filter changes or custom installation in the field or on the OEM production
line. Lamps and filters may be changed at any time with ease and without
dismounting switch from panel or disturbing wiring.
RELAMPING/REPLACING
COLOR FILTERS
Remove escutcheon and lever
For color filters, use fingernails or
small screwdriver to remove. Gently
lift (don’t pry) up under edge of
filter until it “pops” out.
Place new filter in position and press
until it “snaps” in. Replace lever
assembly and escutcheon.
assembly. (see “MOUNTING” above)
For relamping, pull lamp out of
retainer with finger-tip. Replace lamp.
(see “MOUNTING” above)
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
LEVER-LITE® ILLUMINATED LEVER SWITCHES – SERIES 84000
296
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
LEVER SWITCHES (continued)
LEVER-LITE® III SERIES 84000 - ILLUMINATED
LEVER SWITCHES
Springs: Copper alloy, plated.
Lamp Terminals: Copper alloy, plated.
Lamp Socket: Zinc, plated.
Terminals: Copper alloy, plated, straight solder lugs.
Housing, Escutcheon, Knob, Actuator and
Switching Stacks Insulation: Molded plastic.
Temperature Range: -22°F to 158°F (-30°C to +70°C).
Dielectric Strength: 1 kV DC.
SPECIFYING LEVER-LITE® III SWITCHES
1. Basic Switch - Refer to Part Number table for ordering
switches. For special switches, such as talk-listen
(intercom) function, special circuit forms, or
non-illuminated switches, contact factory for price
and delivery.
Leakage Resistance: 1,000 MΩ or greater.
2. Illumination - Supplied with standard color filters installed.
Switchcraft will install other combinations at nominal
extra cost.
K-131 COLOR FILTER KIT
Kit is available for changing or replacing color filters to meet
illumination requirements. Each kit contains 3 filters of each
color: Amber, Blue, Green, Red, White and Yellow.
3. Lamps - Lamps are not supplied with switches.
SPECIFICATIONS
Mounting/Retaining Clips and Covers: Steel, plated.
Contact Ratings: Welded cross bar palladium contacts
rated at 1A, 200W maximum AC non-inductive load are
standard. Other contacts available. See “SPECIAL
ORDER FEATURES” on page 295.
SWITCHCRAFT PART NUMBER K-131
REPLACEMENT LEVERS
Number G6083 (for locking lever)
Number G6084 (for non-locking lever)
PART NUMBERS
TWO POSITION
THREE POSITION
Part Numbers
Part Numbers
◊84306
Position 1 Position 2
1-C
2-C
4-C
1-C
2-C
4-C
Non-Locking
◊84206
Locking
84206L
◊84212L
Switching
2-C
84306L
84312L
84324L
◊84312
◊84324
◊84212
4-C
◊ Special order only; contact Switchcraft.
LEVER-LITE® SERIES 84000
PANEL OPENING
.750" (19.05mm)
x 1.375" (34.92mm)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
LEV-R® SWITCHES – SERIES 12000 297
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
LEVER SWITCHES (CONTINUED)
12012
12013
12016
12014
12017
12010
12011
12015
LEV-R® SWITCH SERIES 12000
Electrical
12000 SERIES RA LEV-R SWITCHES
Contact Ratings: Fine silver contacts rated at 3A, 300W
maximum AC non-inductive load standard. Other
contacts available
Leakage Resistance: 1,000 MΩ or greater
Dielectric Strength: 250 VDC
PANEL OPENING
.469" (11.91mm) DIAMETER
MAXIMUM PANEL THICKNESS
.094" (2.39mm)
Material
Frame: Copper alloy, plated (3,000, 13,000); Steel,
plated (12,000)
Bushing and Shaft: Copper alloy, plated
Springs: Copper alloy
Knob: Black molded thermoplastic
12000 SERIES STRAIGHT LEV-R SWITCHES
Mounting Hardware: Knurled copper alloy locknut
T10711, supplied. P10531 hex locknut, special order
Insulation: Rigid plastic spacers with plastic tubing
through stack. Rigid plastic and/or thermoplastic lifters.
Thermoplastic cam on actuator end
PART NUMBERS
TWO POSITION NON-LOCKING*+ THREE POSITION NON-LOCKING*
Stack Hgt. “X”
& “Y” (max.) Switching
Stack Hgt. “X” &
“Y” (max.)
Switching
Pos.1 Pos. 2
Part Number
◊12001
Part Number
◊12010
◊12011
◊12012
◊12013
◊12014
◊12015
◊12016
◊12017
◊12033
◊12034
◊12035
◊12036
◊12036D
◊12037
.719 (18.26)
.688 (17.48)
.750 (19.05)
.813 (20.65)
.906 (23.01)
.875 (22.22)
1.000 (25.40)
1.063 (27.00)
1-A
1-B
1-C
1-D
2-A
2-B
2-C
2-D
.703 (17.86)
.703 (17.86)
.766 (19.46)
.703 (17.86)
.703 (17.86)
1.078 (27.49)
.703 (17.86)
.703 (17.86)
.719 (18.26)
.813 (20.65)
.750 (19.05)
.875 (22.22)
1.000 (25.40)
.875 (22.22)
1-B
1-B
1-B
1-B
1-B
2-B
1-B
1-B
1-B
1-B
1-B
1-C
1-B
2-B
1-B
1-B
◊12002
INTERCOM SWITCHES
◊12003
Part Number
◊12033T
Stack Height "X" &"Y"
Switching
1-K
◊12003D
◊12004
.719 (18.26)
.875 (22.22)
◊12005
◊12037T
2-K
◊12006
* Add prefix “R” to part number if non-turn mounting is required. (Special order).
◊12006D
+
Add suffix “L” to part number if locking type is required.
1-K
2-K
◊ Special order only; contact Switchcraft.
1-A
1-B
1-C
1-D
1-A
1-B
1-C
1-D
Knobs
T12742
T12745
Black
White
T127410 Ivory
P2912 Amber
Knobs must be ordered separately.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
LT® SWITCH – SERIES 4100
298
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
LT® SWITCH
SPECIFICATIONS
LEVER SWITCHES (CONTINUED)
Frame: Steel, plated.
Bushing and Actuator: Copper alloy, plated.
Springs: Copper alloy.
Contact Ratings: Welded cross bar palladium contacts
rated at 2A, 200W maximum, AC non-inductive load are
standard. See “SPECIAL ORDER FEATURES”.
Terminals: Tin dipped solder lugs.
Mounting Hardware: Supplied with one copper alloy-plated
hex locknut (P10531); and one non-turn washer (P10639).
Insulation: Rigid plastic spacers with plastic tubing
through
SERIES 41000
the stack assembly. Lifters of thermoplastic.
Lifter-Roller Assembly: Molded plastic.
Knob: Supplied with a paddle style, screw-on black plastic
knob. See “SPECIAL ORDER FEATURES”.
Temperature Range: -22°F to 158°F (-30°C to +70°C).
Leakage Resistance: 1,000 MΩ or greater.
MOLDED DUST COVERS
PANEL OPENING
Dust cover is an environment and electrical shield, protecting
and improving appearance and increasing switch dependability.
Covers enshroud complete switch, preventing build-up of
dust, dirt, contamination.
.469" (11.91mm) DIAMETER
MAXIMUM PANEL THICKNESS
LT® SWITCH SERIES 41000
.25" (6.35mm)
LT® SWITCH
SPECIAL ORDER FEATURES
1. Talk-Listen (Intercom) function.
2. Fine silver and other alloys available for contacts.
See page 294.
SERIES 41000
3. UL recognized switches. See page 294.
LT® SWITCH PART NUMBERS
2 POSITION NON-LOCKING*
Stack Heights
Dimension “X” max.
Part Numbers
◊41203
Switching
1-C
MOLDED DUST COVER
.531 (13.49)
2-C
.531 (13.49)
41206
P2362
(up to 4-C per side)
4-A
.615 (15.62)
◊41208
4-C
.750 (19.05)
41212
3 POSITION NON-LOCKING*
Position 1
Position 2 Dim. “Y” Dim. “X”
◊41306
◊41308
41312
41324
1-C
2-A
2-C
4-C
1-C
2-A
2-C
4-C
.531 (13.49) .531 (13.49)
.500 (12.7) .500 (12.7)
P2360
(up to 2-C per side)
.531 (13.49) .531 (13.49)
.750 (19.05) .750 (19.05)
*Add suffix “L” to part number for locking type.
To avoid ordering special switches, order a larger standard circuit,
providing the circuit meets your requirements.
◊ Special order only; contact Switchcraft.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
GENERAL PURPOSE STACK SWITCHES 299
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
GENERAL PURPOSE STACK SWITCHES
The types of General Purpose Stack Switch Components
available are:
GENERAL PURPOSE STACK SWITCHES
(SPECIAL ORDER ONLY)
• .375" (9.52 mm) mounting centers
• .250" (6.35 mm) mounting centers
• “Tini-Stack” Switches .188" (4.78 mm) mounting centers
• Telephone Relay Type Switches .250" (6.25 mm) mounting
centers
Complete general purpose stack switch assemblies are
made from a pile-up of various actuator springs, contact
springs and lifters. These stack switch assemblies can be
used on manually operated control devices where switching
is operated by cams, push-buttons and other similar
mechanical devices. The stack switch assembly is made up
of an actuator spring and various contact springs. These
current carrying members are insulated from each other by
phenolic spacers with plastic tubing press fitted through the
stack; thereby insuring correct alignment of contacts and
providing high insulation resistance when mounted.
STACK SWITCH COMPONENTS
Switchcraft offers various stack switch components, such as
contact springs, spacers, lifters, etc., in many lengths, thicknesses,
mounting centers and other details.
Switchcraft can assemble components into innumerable different
stack switch assemblies. It is impossible to catalog every type of
stack that has been manufactured. Stack switch assemblies can be
designed to meet UL requirements, but only as part of equipment.
.375" STACK SWITCHES
.250" (6.35 MM) STACK SWITCHES
Thousands of switching combinations are possible. Switch
mounting centers are .375" (9.52 mm) (minimum) with
.25" (6.35 mm) wide switch parts. Practical spring length
is 2.625" (66.68 mm) (maximum). Contact Switchcraft for
selection of contacts and ratings.
Thousands of switching combinations are possible with slightly
smaller parts. Mounting centers are .250" (6.35 mm) (minimum)
with .188" (4.78 mm) wide parts. Practical spring length
is 2.125" (53.98 mm) (maximum). Contact Switchcraft for
selection of contacts and ratings.
MINIATURE .188" (4.78MM) STACK SWITCHES
TELEPHONE RELAY TYPE SWITCHES
Many Tini-Stack® switching combinations are possible.
Switch mounting centers are .188" (4.78 mm) (minimum).
Practical spring length is 1.750" (44.45 mm) (maximum).
Compact stack switches are particularly suitable for low activating
force, such as in relay and magnetic operated devices.
Contact Switchcraft for selection of contacts and ratings.
SPECIFICATIONS
Springs: Copper alloy, in thicknesses ranging from
SPECIFICATIONS
Springs: Copper alloy, in most standard gauge thickness-
es ranging from .006" (0.15 mm) to .016" (0.41 mm).
Spacers: Rigid plastic, available in thickness of .015"
(0.38 mm), .032" (0.81 mm) and .046" (1.17 mm).
Contacts: Welded cross bar palladium rated at 2A, 200W
AC non-inductive load. Gold alloy generally recommended
for “dry” circuit applications.
Tubing: Thermoplastic.
Lifters: Thermoplastic.
Mounting Hardware: Pressure plate, twin nut and screws:
Steel, plated.
.006" (0.15 mm) to .012" (0.30 mm).
Spacers: Rigid plastic is standard in thickness of .031"
(.79 mm), .047" (1.19 mm) and .063" (1.60 mm).
Contacts: Fine silver or welded cross bar palladium
are standard. Palladium or gold alloy are generally
recommended for “dry” circuit applications. Other contacts
available for varied customer requirements on special order.
Tubing: Thermoplastic.
Lifters: Thermoplastic.
Bracket: Steel, plated.
Mounting Hardware: Pressure plate, twin nut and screws:
Steel, plated.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
300 GENERAL PURPOSE STACK SWITCHES – COMPONENT SPECIFICATIONS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
GENERAL PURPOSE STACK SWITCHES (continued)
STACK SWITCH COMPONENT SPECIFICATIONS
1. SPRINGS - Copper alloy in most standard gauge thickness-
es of .006" (0.15 mm), .008" (0.20 mm), .010" (0.25 mm), .012"
(0.30 mm), .016" (0.40 mm) and .020" (0.50 mm), a few designs
can be made up to .031" (.079 mm) thick. All or any contact
point hole can be provided; spring can be cut at any point.
HOW TO ORDER STACK SWITCHES
Careful consideration of the following suggestions will help
specify the most economical and expeditious approach to your
switching needs. On initial inquiry or order, supply the following
information:
1. Simple sketch or drawing. See “Typical Stack Assembly”
drawing. Give details checked that are available.
2. Current, voltage and type of switching load (resistive or
inductive).
3. Frequency of operation; life requirements.
4. Details of actuator.
5. Maximum and minimum movement of actuator blade.
6. Any other important specifying details.
2. BRACKETS - Standard brackets are detailed on drawing.
Tools are flexible so that various lengths from same width
stock can be provided.
3. LIFTERS OR PUSHERS - .125" (3.18 mm) and .188" (4.78
mm) diameter thermoplastic in various lengths staked into
one of the contact point holds provides tandem action
between blades or to serve as an actuator.
It is recommended that data indicated above be forwarded to
Switchcraft for comments and recommendations before finalizing
your design.
4. MOUNTING HARDWARE - Pressure plates (S1293 and
S2300) twin nuts (S1008 and S1431) and screws available for
mounting.
5. LEAF INSULATORS - Punched in same shape as springs
in .015" (0.38 mm) thickness of fish paper or mylar.
6. SPACERS - Rigid plastic is standard in thicknesses of .015"
(0.38 mm), .032" (0.81 mm), .051" (1.30 mm) and .062" (1.57
mm). Thickness of .093" (2.36 mm) is available for .375" (9.52
mm) mounting centers only. For longer surface creepage
paths, use both large and standard sized spacers. High tem-
perature insulation also available.
1.
6.
7. THERMOPLASTIC TUBING - .375" (9.52 mm) mounting
centers pass #5 screw. .250" (6.35 mm) mounting centers pass
#3 screw. .188" (4.78 mm) mounting centers pass #2 screw.
2.
3.
7.
8.
8. CAM FOLLOWERS - Two roller bracket designs (G1734
and G2298) available for springs .250" (6.35 mm) wide.
Copper alloy standard. Can be furnished in various diameters
and materials. Thermoplastic rollers also available.
9. CONTACTS - Welded cross bar contacts are commonly
used for cost savings. However, riveted contacts are available.
Size and material depend on circuit requirements (supply
complete details). For low level audio circuits, we suggest gold
alloy or palladium cross bar contacts. Springs can be
bifurcated (two contacts per spring).
4.
5.
TYPICAL STACK ASSEMBLY
9.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
MULTIPLE STATION SWITCHES 301
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE STATION SWITCHES
SERIES IBS
FEATURES
SERIES 65000
DW MULTI-SWITCH
SERIES 66000, 67000
DW MULTI-SWITCH
Switches are designed to meet performance requirements of and reprogramming of equipment.
sophisticated equipment such as: analog and digital computers,
Momentary common release function - Permits one or more
momentary common release stations on switch to facilitate
special operating and release sequences.
analyzers, transmitters and receivers, intercoms, machine and
process controls, ground support systems, scientific instruments
and test measurement and instrumentation.
“Split-interlock” function - Two separate groups of inter-lock
stations on the same frame offers exceptional design latitude and
reduces production line time.
STANDARD MECHANICAL FUNCTIONS
INTERLOCK - actuating a button automatically restores to
normal the button previously actuated. Lock-out feature,
which prevents the mechanical operation of more than one
button at a time, is standard on all interlock switches.
GANGED ASSEMBLIES (Special Order)
Multiple row switching (ganged assemblies) with interaction
between rows are available on special order. Space-saving
ganged assemblies reduce production line assembly, wiring and
testing time. All features of single row switching, including all
standard and special features, are available. Contact Switchcraft
for specifying assistance.
NON-LOCK - each button has momentary action. No interaction
between buttons. Lock-out available on special order only.
ALL-LOCK - all buttons, except release, lock when
depressed (accumulative lock). All buttons restored to normal
by activating release button which has momentary action.
PUSH-LOCK/PUSH-RELEASE - pushbutton locks when
depressed and is released when again depressed.
PUSHBUTTONS
Illuminated and non-illuminated switches can be specified with
LOCK-UP - built-in, electrically operated solenoid locks all standard or special pushbuttons. See coverage on individual
stations (in respective positions). Limited to operation of up to
12 stations only and energized from a remote position. Not
available in push-lock/push-release.
series for information.
LEGENDS
Legends can be supplied on illuminated and non-illuminated
pushbuttons. Contact Switchcraft.
SPECIAL ORDER MECHANICAL FUNCTIONS
Mechanical functions on selected series can be intermixed on
the same frame on special order only. Contact factory for
details and availability.
Multi-Switch switches have been designed to readily
accommodate “special” functions at nominal cost. Special
functions are described at right.
Intermixed functions - the following combinations of standard
functions intermixed on the same frame are available:
• Interlock and Non-Lock
• Interlock and Push-Lock/Push-Release
• All-Lock and Non-Lock
• All-Lock and Push-Lock/Push-Release
• Push-Lock/Push-Release and Non-Lock
Lock-out function - Refer to above description under
“Interlock.”
Push-release cancelling function - Speeds programming
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
302 MULTIPLE-STATION SWITCHES
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
SERIES 90000, 920000
TINI DW MULTI-SWITCH
SERIES 37000, 38000
SERIES 35000
LITTEL® MULTI-SWITCH
LITTEL® MULTI-SWITCH
CHOOSING THE RIGHT MULTIPLE-STATION SWITCH
Switching
Switch
Series
Mechanical
Functions1
Stations
(Maximum)
Per Station
(Maximum)
Contact
Rating2
Lighting
Accessories3
35000
36000
37000
38000
65000
66000
67000
90000
92000
ILO, N, A, PL/PR
18
18
6PDT
6PDT
4PDT
3PDT
4PDT
2A AC, 200W
No
No
C, G, M, P, S, PC/WW
C, G, M, P, S,
PC/WW, LWO
ILO, N, A, PL/PR
2A AC, 200W
Yes
Yes
No
ILO, N, A, PL/PR
ILO, N, A, PL/PR
18
18
3A AC, 0.5A DC
3A AC, 0.5A DC
C, G, M, S, PC/WW
C, G, M, S, PC/WW
No
4PDT
Yes
12 - ILO, A
18 - N, PL/PR
ILO, N, A
I, N
8PDT
2PDT
0.5A 28V AC or DC
No
No
M
.125A, 125 VAC
or 28 VDC
IBS
12
P, M
1. I = interlock, ILO = interlock with lockout, N = non-lock (momentary), A = all-lock (special order), PL/PR = push-lock/push-release.
2. Non-inductive load.
3. C = optional switch contact, G = ganged assemblies, M = special/mixed functions, P = optional pushbuttons, S = solenoid release, PC/WW = PC and
wire-wrapping terminals, LWO = lighting wiring options.
ORDERING
Order switches by part number in this section.
For any optional or special order feature, contact Switchcraft.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
LITTEL® MULTI-SWITCH – SERIES 35000 303
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
LITTEL® MULTI-SWITCH
SERIES 35000
TYPICAL PANELS DIMENSIONS
SERIES 35000
SERIES 35000
Specify 1 to 18 stations (non-illuminated) with a large
selection of mechanical functions, choice of pushbuttons,
and up to 6 poles of switching per station. Plungers are on
.625" (15.88 mm) centers and are made from .050" (1.27
mm) x .187" (4.75 mm) steel. A square black pushbutton,
A592, is supplied with each station. A wide variety of
special mechanical functions, features and accessories
are also available.
ORDERING INFORMATION
STANDARD SWITCHES
Order by part number from tables.
SPECIAL SWITCHES
Many special mechanical functions, features and
accessories are available. Contact Switchcraft.
• Ganged Assemblies • Pushbuttons
• Special Mechanical Functions • Legends
• Switch Stacks • Accessories
PART NUMBERS/2-C PER STATION1
• PC and Wire-Wrapping Terminals
Interlock
with Lock-Out
Push-Lock/
Push-Release
Number of
Stations2
Non-Lock
◊35022206
◊35042206
◊35062206
◊35082206
◊35102206
◊35122206
35021K206
35041K206
35061K206
35081K206
35101K206
35121K206
◊35027206
◊35047206
◊35067206
◊35087206
◊35107206
◊35127206
2
4
6
8
10
12
PART NUMBERS/4-C PER STATION1
◊35021K212
◊35041K212
◊35061K212
◊35081K212
◊35101K212
◊35121K212
◊35022212
◊35042212
◊35062212
◊35082212
◊35102212
◊35122212
◊35027212
◊35047212
◊35067212
◊35087212
◊35107212
◊35127212
2
4
FIGURE A - PANEL CUTOUT FOR
PLUNGER CLEARANCE ONLY
6
8
10
12
1. Switches with all-lock function are available on special order. Contact
Switchcraft.
2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with
13 through 18 stations are also available. Contact Switchcraft.
◊ Special order only; Contact Switchcraft for price and delivery information.
FIGURE B - PANEL CUTOUT FOR
SERIES A590 PUSHBUTTON CLEARANCE ONLY
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
LITTEL® MULTI-SWITCH – SERIES 36000, 37000 & 38000 FEATURES
304
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
LITTEL® MULTI-SWITCHES
SERIES 36000, 37000, 38000
SERIES 36000 - NON-ILLUMINATED
SERIES 37000 - SINGLE LAMP
SERIES 38000 - TWIN LAMPS
SERIES 36000
Identical to Series 37000, except non-illuminated. Pushbuttons
match Series 37000 and 38000 Switching up to 6PDT.
5PDT circuitry (1 pole is required for lighting lamps). two, T 1-3/4
lamps per station are used (lamps are not supplied). Ganged
assemblies and solenoid releases are available;
contact Switchcraft. See pages 316 and 317 for special effects
display screens and inserts.
SERIES 37000
Same as Series 35000, but features large, rectangular face
pushbuttons, illuminated by one lamp and having large legend
area. Switching is up to 4PDT. Switch stations are on .625"
(15.88 mm) centers, and depth behind panel is 2.313" (58.75
mm). Black pushbutton housings have white translucent
inserts, white legend insert, two support inserts, and transpar-
ent display screen. Other pushbuttons and combinations are
possible; see pages 316 and 317.
LIGHTING
Series 37000 and 38000 can be used in control systems where
the light is either “ON”, or “OFF” or permanently “ON”.
One or any combination of the three lighting arrangements
listed below can be specified on a switch. NOTE: Standard
switches ordered from tables can be wired for “L”, “M” or “N” type
lighting.
On 2-C per station switches, each station includes two,
83P switch stacks and one H83P lighting stack, and one
convenience lighting spring. Contact ratings: 2A, 200W
maximum AC non-inductive load.
TYPE DESCRIPTION
“L”
Pushbuttons light in the “IN” position.
“M”
“N”
Pushbuttons light in the “OUT” position.
Pushbuttons light in the “IN” and “OUT” positions.
On 4-C per station switches, each station has 4, 83P switch
stacks, one H83P lighting stack, and one convenience lighting
spring. “L” and “M” lighting arrangements can be effected by
wiring directly to the H83P and H lighting stacks.
ORDERING
STANDARD SWITCHES
Order by part number from tables.
Each switch station uses an industry standard T 1-3/4 lamp
(not supplied). Special features such as ganged assemblies,
solenoid release, and T-1 lamp adapter are available; contact
Switchcraft. See pages 316 and 317 for special effects display
screen and inserts.
SPECIAL SWITCHES
Many special mechanical functions, features and accessories
are available. Contact Switchcraft for special order items.
• Ganged Assemblies • Special Mechanical Functions
• Special Color Displays • Pushbuttons
• Legends • Switch Stacks
SERIES 38000
Similar to Series 37000, except features twin lamp illumination
at each station for redundant or 2-color, split-face (alternate)
lighting.
• Wiring Lighting Options • PC and Wire-wrapping Terminals
• Accessories
On 2-C per station switches, each station includes 3, H83P
lighting switch stacks and 1 lighting spring. This provides up to
3PDT circuitry (1 pole is needed for lighting lamps; lamps not
supplied). Contact ratings: 2A, 200W maximum AC non-induc-
tive load.
On 4-C per station switches, each station has three, H83P,
two, 83P switching stacks and one lighting spring. This offers
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
LITTEL® MULTI-SWITCH – SERIES 36000, 37000, & 38000 305
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
LITTEL® MULTI-SWITCHES
SERIES 36000, 37000, 38000 (continued)
SERIES 38000
PART NUMBERS / 2-C PER STATION1
SERIES 37000
PART NUMBERS / 2-C PER STATION1
Interlock
with Lock-Out
Push-Lock/
Push-Release
Number of
Stations2
Interlock
with Lock-Out
Push-Lock/
Push-Release
Number of
Stations2
Non-Lock
◊370221206
◊370421206
◊370621206
◊370821206
◊371021206
◊371221206
Non-Lock
◊380221206
◊380421206
◊380621206
◊380821206
◊381021206
◊381221206
◊37021K1206
◊37041K1206
◊37061K1206
◊37081K1206
◊37101K1206
◊37121K1206
◊370271206
◊370471206
◊370671206
◊370871206
◊371071206
◊371271206
2
4
◊38021K1206
◊38041K1206
◊38061K1206
◊38081K1206
◊38101K1206
◊38121K1206
◊380271206
◊380471206
◊380671206
◊380871206
◊381071206
◊381271206
2
4
6
6
8
8
10
12
10
12
PART NUMBERS / 4-C PER STATION1
PART NUMBERS / 4-C PER STATION1
◊37021K1212
◊37041K1212
◊37061K1212
◊37081K1212
◊37101K1212
◊37121K1212
◊370221212
◊370421212
◊370621212
◊370821212
◊371021212
◊371221212
◊370271212
◊370471212
◊370671212
◊370871212
◊371071212
◊371271212
2
4
◊38021K1212
◊38041K1212
◊38061K1212
◊38081K1212
◊38101K1212
◊38121K1212
◊380221212
◊380421212
◊380621212
◊380821212
◊381021212
◊381221212
◊380271212
◊380471212
◊380671212
◊380871212
◊381071212
◊381271212
2
4
6
6
8
8
10
12
10
12
1. Switches with all-lock function are available on special order.
Contact Switchcraft.
1. Switches with all-lock function are available on special order.
Contact Switchcraft.
2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with
13 through 18 stations also available. Contact Switchcraft.
2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with
13 through 18 stations also available. Contact Switchcraft.
◊ Special order only; Contact Switchcraft for price and delivery information.
◊ Special order only; Contact Switchcraft for price and delivery information.
MATERIAL SPECIFICATIONS
Frame: Steel, dry film lubricant.
TYPICAL PANEL OPENING
Plungers, Stack Switch Mounting Brackets and Screws:
Steel, plated.
Stack Switches: Stack switch springs are made of copper
alloy. Solder lugs are hot tin-dipped.
Insulation: Stack switches: rigid plastic spacers with
plastic tubing through stack.
Lifters: Thermoplastic.
SERIES 37000, 38000
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
306 LITTEL® MULTI-SWITCH – SPECIAL EFFECTS COLOR DISPLAY & INSERTS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
SPECIAL EFFECTS COLOR DISPLAY SCREENS AND INSERTS
Display screens and inserts are offered in a wide choice of colors for SERIES 37000 and 38000 Littel Multi-Switch switches. Display
screens with high-lights are useful in high ambient lighting; or display screens with soft, uniform, and diffused lighting for use under low
ambient lighting conditions. Order display screens, inserts and filters separately. See Part Number Chart below.
SERIES 401 DISPLAY SCREENS – Display screens with contoured
Series 401 Display Screen
A
B
face give a better operation “feel”. Rectangular shape provides greater
area for engraving legends and symbols. Entire screen is illuminated
by single or twin lamp indication. Various brightness and color
combinations are possible by use of legend filter and split face inserts.
Series 404
A
B
Legend insert recesses into display
screen. Omit when split-face
inserts are used.
Part Number 404 05
White legend insert has a matte
finish on one side suitable for
in-the-field marking.
SERIES 404 LEGEND INSERTS – Small translucent inserts provide
special color effects. White colored insert (40405) has a special matte
surface for in-the-field identification with ink, pencil or lettering transfers.
Special color effects can be accomplished with combination of a
colored insert with a clear display screen. IMPORTANT: Order legend
insert (40412) with every pushbutton.
Part Number 404 12
Retaining Insert
Clear insert snaps into display
screen from rear to retain legend
inserts. Omit when split-face
inserts are used.
C
SERIES 407 SPLIT-FACE INSERTS – Split-face inserts provide sepa-
rate control or indicating functions through the use of color. Ideal for
use on Series 38000 Littel Multi-Switch switches where each pushbutton
can serve as two indicator lights. Up to two lamps can be used per
display screen which are split lengthwise by 2-color split-face inserts.
Inserts may be hot-stamped. Order (406) light divider when “flip-flop”
lighting is specified; or for redundant lighting where a definite visual
indication of lamp failure is desired. A frequently used combination is
red and green. Red might indicate danger, stop, etc. Green, go, “okay”,
etc. IMPORTANT: Use (40212) clear insert with a split-face insert.
C
D
Series 407 Split-Face Insert
Use with Series 38000
D
E
Series 402 Color Filter Inserts
White insert used with blue, white
and clear display screens; clear
insert used with red, green and
yellow. All color filters are omitted
where split-face insert is used.
E
F
SERIES 402 FILTER INSERTS – Inserts add greater color definition.
Ideal for use under low ambient lighting conditions where brightness
of illuminated pushbuttons must be minimized. A white filter insert
(40205) is useful in cutting down the brightness of a white color insert
and a white or clear display screen. However, it is omitted when color
display screen is used. Filters also diffuse light evenly over entire
face of display screen with no “hot spots” or darkened corners.
IMPORTANT: Order clear insert (40212) for use with every color filter
insert. Clear insert snaps in button housing behind a color filter insert
and serves as a heat shield.
Part Number 402 12 Heat
Shield Insert
Clear filter insert snaps into
push-button housing. Must be
used in every pushbutton assembly.
F
G
H
Part Number 406
G
H
406 LIGHT DIVIDER – A light divider is used in the standard pushbutton
housing to separate the illumination from the twin lamps used in the
Series 38000 Littel Multi-Switch switches. Order a light divider for
every pushbutton station in the Series 38000 where split-face lighting
has been specified.
Light Divider Recesses into
pushbutton housing. For use
with Series 38000.
Series 405 02 Pushbutton
Housing.
Series 405 PUSHBUTTON HOUSINGS – One-piece housing for all
37000 and 38000 switches. Accepts Series 401, 402, 404, 406 and
407 components. Standard color is black. Other colors available.
ORDERING – For variations in pushbutton configurations, contact
Switchcraft.
Part No.
Figure
Color
Part No.
◊40403
◊40404
◊40405
◊40408
◊40412
◊40201
◊40203
◊40204
◊40205
Figure
Color
Part No. Figure
Color
◊40101
◊40103
◊40104
◊40105
◊40108
◊40112
◊40116
◊40401
Red
Green
Blue
◊40208
◊40212
◊40701
◊40703
◊40704
◊40705
◊40708
◊406
E
F
Yellow
Green
Blue
Clear (heat shield insert)
B
White
Yellow
Red
A
B
White
Green
Yellow
Clear
C
E
Clear (retaining insert)
D
Blue
Red
White
“Black Screen”
Red
Green
Blue
Yellow
G
H
White (light divider)
Black (housing)
White
White
40502
◊ Special order only; Contact Switchcraft for
price and delivery information.
40505
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
LITTEL® MULTI-SWITCH – ACCESSORIES 307
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
LITTEL® MULTI-SWITCH ACCESSORIES
HIGH CURRENT “TINI-STACK” SWITCH STACKS
Heavy duty switch stacks Series 60W for use in 120V, AC
power circuits are available with large, fine silver contacts
rated at 5A, non-inductive load. Stack spacer width limits
mounting to one stack/station on each side of frame and
requires special mounting bracket.
Series 60BG
Bifurcated
Switch Stacks
Special
Mounting
Bracket
For 10 and 15A switching, contact Switchcraft.
POSITIONING SWITCH STACKS
(SERIES 80P, 800P, 80G AND 800G ONLY)
Refer to chart below for proper balancing of the switch stacks
mechanical load at each station, “X” denotes correct positioning
of the stack on the removable switch stack bracket.
Series
80P Stacks
Top
Bottom
1
4
2
5
3
6
Mounting
Bracket
Top
Bottom
Basic Contact Forms
“TINI-STACK” SWITCHES
Many combinations of stack switches are available on special
order. Contact Switchcraft for specifying assistance, including
clearances for stack heights.
A
B
C
D
Other contact forms available on special order
SERIES 80P - Crossbar welded palladium contacts rated: 2A,
200W maximum, AC non-inductive load. For use where
contacts of a released station will return to normal before
SERIES NJ SOLENOID RELEASE
Solenoid assembly attaches to end of switch frame and
provides electrical release of activated stations. Instructions
and hardware furnished. Other voltages are available on
special order; contact Switchcraft.
contacts of
a
newly operated station are actuated.
Not recommended for use on push-lock/push/release function.
SERIES 800P - Same as Series 80P but can be used on
push-lock/push-release function, or on other functions where
contacts of a newly operated station must be actuated before
contacts of a released station return to normal.
SERIES 80G - Same as Series 80P, except includes
cross-bar welded gold alloy contacts rated at 1A, 100W
maximum, AC non-inductive load.
SERIES 800G - Same as Series 80G except for push-
lock/push-release and/or other functions as described for
Series 800P.
BIFURCATED “TINI-STACK” SWITCH STACKS
Double reliability through use of bifurcated switch stacks
featuring bifurcated leaf springs slotted at the contact end and
parallel to the long axis of the leaf spring. Separate crossbar
gold alloy contacts are welded to leaf springs on each side,
doubling the number of contacts on each spring.
TYPICAL MOUNTING
SERIES 60BG - Similar to Series 80P, except bifurcated leaf
springs with welded crossbar gold alloy contacts rated at 1A,
100W maximum, AC non-inductive load.
SERIES 600BG - Same as Series 60BG, except for use on
push-lock/push-release function and/or functions as
described under Series 800P.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
LITTEL® MULTI-SWITCH – ACCESSORIES
308
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
LITTEL® MULTI-SWITCH ACCESSORIES
WIRE-WRAPPING TERMINALS
RECOMMENDED WIRE-WRAPPING TOOLS
Special order wire-wrapping terminals optimize use of
semi-automated termination equipment to save production
line time.Terminal shoulders accommodate 1, 2 or 3 wrapped
connections per terminal and prevent wrapping tool from
“bottoming” (on first wrapped connection) and possibly
shorting against other metal parts on switch stack. 4-C
switching per station maximum.
NOTE: Stack height dimension will be greater when
wire-wrapping terminals are specified. Stack height for 1-A
and 1-B circuit is .516" (13.11 mm). For 1-C height is .594"
(15.09 mm).
(Gardner -Denver Co. Part Numbers)
Wire Gauge
Wrapping Bit
Sleeve
#22 & #24
#25
500131
500131
37006
18840
18840
17611-2
#26
RECOMMENDED WIRE-WRAPPING PARAMETERS
Number of Wraps Per
Connections Connection
Wraps Per
Connection
Wire
Gauge
Wire
Gauge
Number of
Connections
3
3
4
5
4
5
#22
#24
#25
#26
3
3
ORDERING: Contact Switchcraft for details.
SHOULDER
SERIES 35000 WITH
WIRE- WRAP* TERMINALS
* Registered trademark of Gardner-Denver Co.
SERIES 37000
WITH WIRE- WRAPPED
TERMINALS
LAMP SOCKET T12
LAMP ADAPTER T1
LAMP SOCKETS AND ADAPTERS
LAMP SOCKET T10 ◊
Standard on Series 37000, T10 accepts standard midget
flange type T1-3/4 lamps.
LAMP SOCKET T12 ◊
Standard on Series 38000, the T12 socket accepts standard
midget flange type T1-3/4 lamps.
LAMP ADAPTER T1
Converts sockets that accommodate standard T 1-3/4,
(P1593) midget flange base lamps to accept T 1 subminiature
lamps. Adapter fits T 1-3/4 lamp socket. The 2-piece adapter
holds lamp securely in place to assure positive contact of
lamp circuit in most environments. If you require extra
long-life, specify a T 1 lamp adapter for each T 1-3/4 socket.
PC TERMINALS
Copper alloy PC terminals are integral with associated leaf
spring and feature shoulders for proper clearance from PC
board and for solid mounting. Contact Switchcraft for details.
◊ Available on special order only; Contact factory for price and delivery information.
SERIES 37000 WITH PC TERMINALS
Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
DW MULTI-SWITCH – SERIES 65000 309
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
DW MULTI-SWITCH
SERIES 65000
Available with up to 18 non-illuminated stations in a single row.
Maximum switching per station is 4-C (4PDT). Contacts are
rated: 3A, AC, 0.5A DC, 125V, non-inductive load. Integral
black button is supplied with each station. Switches mount with
#6 screws and nut (not furnished). Contact Switchcraft for spe-
cial assemblies, with ganged assemblies, solenoid release,
PC or wire-wrapping terminals, or escutcheon modules.
SERIES 65000 - Four-station with
DW Escutcheon Modules installed
1
1
PART NUMBERS / 2-C PER STATION
PART NUMBERS / 4-C PER STATION
Interlock
with Lock-Out
Push-Lock/
Push-Release
Number of
Stations2
Interlock
with Lock-Out
Push-Lock/
Number of
Stations2
Non-Lock
◊65022206
◊65042206
◊65062206
◊65082206
◊65102206
◊65122206
Non-Lock
◊65022212
◊65042212
◊65062212
◊65082212
◊65102212
◊65122212
Push-Release
◊65027212
◊65047212
◊65067212
◊65087212
◊65107212
◊65127212
65021K206
65041K206
65061K206
65081K206
65101K206
65121K206
◊65027206
◊65047206
◊65067206
◊65087206
◊65107206
◊65127206
2
4
◊65021K212
◊65041K212
◊65061K212
◊65081K212
◊65101K212
◊65121K212
2
4
6
6
8
8
10
12
10
12
1. Switches with all-lock function are available on special order. Contact Switchcraft.
2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with
13 through 18 stations also available. Contact Switchcraft.
1. Switches with all-lock function are available on special order.
Contact Switchcraft.
2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with
13 through 18 stations also available. Contact Switchcraft.
◊ Special order only; Contact Switchcraft for price and delivery information.
◊ Special order only; Contact Switchcraft for price and delivery information.
PANEL CUTOUT DIMENSIONS
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
310
DW MULTI-SWITCH – SERIES 66000 & 67000
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
DW MULTI-SWITCH
SERIES 66000 and 67000
SERIES DW40 COLOR INSERTS
Many unusual lighting effects can be created using DW40 color
inserts. Molded from dimensionally stable, high-temperature
plastic in six standard colors, inserts slip into standard Series
DW300 pushbuttons providing unusual latitude in custom
designing color and legend effects. With no wear from finger-tips,
legend life is virtually unlimited.
Series 66000 (non-illuminated) and 67000 (illuminated) can
be supplied with up to 18 stations, including a square white
pushbutton Part Number DW305 at each station. Contacts and
ratings are the same as for Series 65000. Lamp sockets
(67000) at each station accept 6V to 28V T 1-3/4 flange base
lamps (not supplied). Mounts with 2 #6-32 machine screws
(not supplied). See page 310 for pushbutton data. Accessories
include solenoid release, ganged assemblies, T1 lamp
adapter, and metal barriers (between stations). PC and
wire-wrapping terminals are also available. Contact Switchcraft.
Color
Part No.
Part No.
Color
Part No.
Color
Red
◊DW41
◊DW43
◊DW44
◊DW45
Blue
◊DW47
◊DW48
Orange
Yellow
Green
White
◊ Special order only; Contact Switchcraft for price and delivery information.
SERIES DW300 PUSHBUTTONS (DW305 supplied standard)
Color1
Part No.
Part No.
Color1
Part No.
Color1
Red
Black
Green
DW301
DW302
DW303
DW304
DW305
DW308
Blue
White
Yellow
DW312
DW313
DW316
Clear
Amber
“Black-
Screen”
NON-ILLUMINATED DW MULTI-SWITCH SWITCHES
Switchcraft offers DW Multi-Switch switches, Series 70000
and 71000 with crossbar plungers which accept a wide variety
of Switchcraft and industry pushbuttons. Contact Switchcraft
for specifying assistance.
1 Other colors available on special order. Buttons are 0.594 (15.09) x 0.594 (15.09)
1
PART NUMBERS/2-C PER STATION
Interlock
with Lock-Out
Push-Lock/
Push-Release
Number of
Stations2
Non-Lock
◊67022506
◊67042506
◊67062506
◊67082506
◊67102506
◊67122506
67021K506
67041K506
67061K506
67081K506
67101K506
67121K506
◊67027506
◊67047506
◊67067506
◊67087506
◊67107506
◊67127506
2
4
6
8
10
12
1
PART NUMBERS/4-C PER STATION
◊67021K512
◊67041K512
◊67061K512
◊67081K512
◊67101K512
◊67121K512
◊67022512
◊67042512
◊67062512
◊67082512
◊67102512
◊67122512
◊67027512
◊67047512
◊67067512
◊67087512
◊67107512
◊67127512
2
4
6
8
10
12
1. Switches with all-lock function are available on special order. Contact
Switchcraft.
2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with
13 through 18 stations also available. Contact Switchcraft.
◊ Special order only; Contact Switchcraft for price and delivery information.
Squeeze upper and
lower surfaces of
pushbutton and
pull free of
Next, grasp lamp with
lamp removal tool or
fingertips and snap-
out. Replace lamp
and pushbutton.
plungers.
Finished in seconds!
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
DW SWITCH – ACCESSORIES 311
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
DW MULTI-SWITCH ACCESSORIES
ESCUTCHEON MODULES, SERIES DW100 AND DW200
Modules are available in colors to match or contrast with
Series 65000 pushbutton colors. Modules are simply slipped
over the pushbuttons before the switch is mounted on the
panel. Flanges on modules overlap the panel cutout and hold
modules securely in place while adding only 0.02" (.051 mm)
SPECIAL SWITCHING FORMS
behind panel space.
In addition to 2-C and 4-C switching, other circuit forms can
be supplied on special order. They are: 1-A, 2-A, 3-A, 4-A,
1-B, 2-B, 3-B, 4-B, 1-C, 3-C, 1-D, 2-D, 3-D, and 4-D.
One module is required for each station. Installation of the
Series DW200 Modules (with barrier) is equally simple. First,
place one Series DW100 Module over the pushbutton
actuator on one end of the row. On the adjacent actuator,
place a Series DW200 Module. Position this module so that
the barrier overlaps the edge of the Series DW100 Module.
Install the remaining Series DW200 modules in the same
manner, with the barriers overlapping. The completed
escutcheon will have barriers between adjacent pushbutton
actuators, but no barriers at the ends of the rows.
BARRIERS (SERIES 67000 ONLY)
As an option, (field installable) barriers can be specified and
installed. Sturdy wire barriers fit between pushbuttons and
prevent accidental simultaneous actuation of adjacent
push-buttons. When a pushbutton is depressed, the fingertip
is guided away from adjacent pushbuttons, and all pressure is
applied to the correct pushbutton.
Switchcraft Part Number ◊P2359 Barriers (package of 25)
Series DW-100
(without barrier)
Series DW-200
(with barrier)
SOLENOID RELEASE
Color*
Red
Solenoids provide electromechanical assistance in releasing locked
switch stations in switches with up to 12 stations. Release can be
effected from a local or remote position. Solenoids are available for use
with switches having inter-lock, all-lock, or push-lock/push-release
mechanical functions. All solenoids are “pull-type”. When ordered
separately, solenoids are supplied with all mounting hardware.Brass
terminals accept “push-on” type clips (ARK-LES #3500M20C), or
wiring can be soldered directly to the lugs.
◊DW101
DW102
DW05
◊DW201
DW202
DW205
Black
White
* Other colors available on special order.
◊ Special order only; Contact Switchcraft for price and delivery information.
SPECIFICATIONS
Frame, Latch Bar, and Switch Housing: Steel, plated.
Mounting Studs (Series 66000 and 67000):
Same as frame above.
Pushbutton Actuators (Series 65000): Molded thermoplastic.
Pushbuttons (Series 66000 and 67000):
Molded thermoplastic.
Terminals: Copper alloy, silver-plated.
Contactors: Copper alloy, plated.
PANEL OPENING
DW100
Terminal Board: Rigid plastic.
Lamp Socket (Series 67000): Copper alloy, plated.
Part
Switch
Coil Res.
(Ohms)
Duty
Cycle
Number Function Mounting* Voltage
◊DW1
◊DW3
Interlock
All-Lock
Interlock
Left
115 AC,
60 Hz
361
20%
10%
DW200
Right
115 AC,
60 Hz
130
◊DW4
◊DW7
Left
24 DC
24 DC
14.2
8.96
20%
10%
All-Lock or
Push-
Lock/Push-
Release
Right
* Direction indicates side of switch frame solenoid is mounted on
(solenoid terminals up).
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
312 TINI® DW MULTI-SWITCH – SERIES 90000 & 92000
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
SERIES 92000 Switch TDW-F
Flip-Flop Pushbutton Installed
SERIES 90000 with
A-650 Pushbuttons Installed
TINI® DW MULTI-SWITCH – SERIES 90000, 92000
Subminiature, multiple station switches have pushbuttons on
0.394" (10mm), 0.590" (15mm), or 0.787" (20mm) centers.
Four mechanical functions: Interlock, Non-Lock, All-Lock and
Push-Lock/Push-Release. Switches mount in panels up to
.343" (8.71mm) thick. Switching per station is 2-C (2PDT),
4-C (4PDT), 6-C (6PDT) or 8-C (8PDT). Contact ratings: 0.5A,
28V AC or DC non-inductive. Solder lug or PC terminals.
Pushbuttons for Tini DW Multi-Switch switches must be specified
separately, below. Refer to page 316 for data on TWDF pushbuttons.
Series A650 pushbuttons can be specified for both Series
90000 and 92000. Legends can be specified; contact
Switchcraft.
PART NUMBERS/2-C PER STATION1
SERIES 90000 - Up to 18 stations on 0.394" (10mm) centers
in a row. Switch mounts with 2, #3 screws (not supplied).
Interlock
with Lock-Out
Push-Lock/
Push-Release
Number of
Stations2
SERIES 92000 - 15mm station centers. Wider spacing
permits mounting Series TDWF pushbuttons.
Non-Lock
◊90022B06
◊90042B06
◊90062B06
◊90082B06
◊90102B06
◊90122B06
◊90024B06
◊90044B06
◊90064B06
◊90084B06
◊90104B06
◊90124B06
◊90027B06
◊90047B06
◊90067B06
◊90087B06
◊90117B06
◊90127B06
2
4
SPECIFICATIONS
ELECTRICAL
Switching Module Rating: 0.5A, 28V AC or DC
non-inductive load.
6
8
10
12
Initial Contact Resistance: 10 milliohms.
PART NUMBERS/4-C PER STATION1
MATERIALS
◊90024B12
◊90044B12
◊90064B12
◊90084B12
◊90104B12
◊90124B12
◊90022B12
◊90042B12
◊90062B12
◊90082B12
◊90102B12
◊90122B12
◊90027B12
◊90047B12
◊90067B12
◊90087B12
◊90117B12
◊90127B12
2
4
Frame Switch Housing: Steel, plated.
Latch Bar: Stainless steel on all-lock function;
zinc alloy on interlock function.
Latch Bar Return Spring: Tinned music wire.
Plunger: Molded thermoplastic.
Plunger Return Spring: Tinned music wire.
Terminals/Contacts: Copper alloy, silver-plated.
Contact Sliders: Bifurcated bimetal (silver on copper alloy).
Terminal Board: Molded thermoplastic (UL 94V-0).
Pushbuttons: Molded thermoplastic.
6
8
10
12
1 Switches with all-lock function are available on special order. Contact Switchcraft.
2 Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through
18 stations also available. Contact Switchcraft.
◊ Special order only; Contact Switchcraft for price and delivery information.
SPECIFYING NOTE:
Series 90000 Part Numbers are given in table. To order Series
92000 switches, substitute “2” for “0” for second digit of Part
Number. Example; Part Number 92024B06 in the Series
92000 version 0.590" (15mm centers) of Part Number
90024B06 0.394" (10mm centers) interlock with lock-out, 2-C
switching per station.
PUSHBUTTONS
Part Number
◊A6501
Color
Red
Part Number
◊A6504
Color
Blue
◊A6502
Black
Green
◊A6505
White
Yellow
◊A6503
◊A6508
Buttons are 0.386 (9.80 mm) x 0.386 (9.80 mm).
◊ Special order only; Contact Switchcraft for price and delivery information.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
TINI® DW MULTI-SWITCH – SERIES 90000 & 92000
313
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
TINI® DW MULTI-SWITCH
SERIES 90000 and 92000
PANEL OPENING SERIES 90000
WITH SERIES A-650 PUSHBUTTONS
RECOMMENDED
PC BOARD LAYOUT
(Component Side)
PANEL OPENING SERIES 92000
WITH SERIES A-650 PUSHBUTTONS
PANEL OPENING SERIES 92000
WITH TDW-F PUSHBUTTONS
NOTE:
For Series 90000 “A” dimension is .394" (10.0mm)
For Series 92000 “A” dimension is .590" (15.0mm)
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
314 IBS MULTI-SWITCH – SERIES IBS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
IBS10B04106AR
TYPE I
TYPE II
0.388 (9.86) x 0.216 (5.49) 0.464 (11.79) x 0.288 (7.32)
PART NUMBERS/0.394" (10MM) CENTERS1
Interlock
Number of Stations2
◊IBS10B02106AR
◊IBS10B04106AR
◊IBS10B06106AR
◊IBS10B08106AR
◊IBS10B10106AR
◊IBS10B12106AR
2
4
6
8
10
12
IBS MULTI-SWITCH SWITCHES
SERIES IBS
Series IBS miniature pushbutton switches are mounted on common
frames, up to 12 stations long with center-to-center spacing of
0.394" (10mm), 0.590" (15mm) or 0.787" (20mm). Available with
interlock, non-lock (momentary) or push-lock/push-release
mechanical functions. .130" (3.30mm) x .130" (3.30mm) square
plungers accept a full line of industry standard pushbuttons.
Switches are stocked without pushbuttons due to wide variety
that can be used. Order pushbuttons separately. Switches have
.157" (4mm) long PC terminals for mounting single- or double-
sided PC boards up to .094" (2.39mm) thick. Close stacking
(centers) permits high density within minimum front panel space.
PART NUMBERS/0.590" (15MM) CENTERS1
◊IBS15B02106AR
◊IBS15B04106AR
◊IBS15B06106AR
◊IBS15B08106AR
◊IBS15B10106AR
◊IBS15B12106AR
2
4
6
8
10
12
PART NUMBERS/0.787" (20MM) CENTERS1
◊IBS20B02106AR
◊IBS20B04106AR
◊IBS20B06106AR
◊IBS20B08106AR
◊IBS20B10106AR
◊IBS20B12106AR
2
4
PUSHBUTTONS
Pushbuttons designed for IBS switches are available in white,
black, red, blue and gray. Others colors are available on special
order. Pushbutton faces are concave for operator convenience
and can be mounted either horizontally or vertically.
Pushbuttons must be ordered separately, but may be factory
installed, if desired, at nominal extra cost.
6
8
10
12
1. Switches with all-lock function are available on special order.
Contact Switchcraft.
2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with
13 through 18 stations also available. Contact Switchcraft.
◊ Special order only; Contact Switchcraft for price and delivery information.
SPECIFICATIONS
MECHANICAL
Switch Actuation: Momentary, interlock and push-lock/
push-release.
Plunger Travel: .144" (3.66 mm).
Actuation Force: At .135" (3.43mm) travel: 12-15 oz.
PUSHBUTTON PART NUMBERS
Type I
P2936
P2937
P2938
◊P2939
◊P2940
P2941
P2942
◊P2943
-
Type II
P2951
P2952
P2953
◊P2954
◊P2955
P2956
P2957
◊P2958
◊P2979
◊P2992
Color
White
Black
ELECTRICAL
0.125A resistive @ 125 V AC, .25 AMP at 28V DC.
Red
Yellow
Green
Blue
MATERIALS
Housing: Thermoplastic 94V-0.
Plunger: Thermoplastic UL 94V-0.
Contactors: Copper alloy.
Terminals: Copper alloy, solder plated. Tin-dipped
available on special order.
Contact Surfaces: Plated.
Frame: Copper alloy.
Gray
Brown
Cream
Tangerine
-
◊ Available on special order only; contact Switchcraft for price and delivery.
Latch Bar: Thermoplastic.
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
IBS MULTI-SWITCH – SERIES IBS 315
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
IBS MULTI-SWITCH SWITCHES
SERIES IBS
IBS PART NUMBERING CODE
IBS
XX
X
XX
X
XX1
X
R
MECHANICAL
FUNCTION
1 - Interlock
2 - Non-Lock
CENTERS
FRAME STYLE
A - Mounting Ears
B - No Mounting Ears
STATIONS
01 - 12
CIRCUITS
01 - 1A
02 - 1B
03 - 1C
04 - 2A
05 - 2B
06 - 2C
TERMINAL
0.394" (10mm)
0.590" (15mm)
0.787" (20mm)
LENGTH
A - 0.157"
(4mm)
* 8 stations maximum on 0.787" (20mm) centers.
1. See page 269 for individual switch terminal conjunction.
DIMENSIONS
RECOMMENDED
PC BOARD
LAYOUT
(Component Side)
(.300 x .100)
(7.62 mm) x (2.54)
0.394" (10mm)
0.590" (15mm)
0.787" (20mm)
STATIONS
0.394" (10mm) CENTERS
Dimension
0.590" (15mm) CENTERS
STATIONS
Dimension
0.787" (20mm) CENTERS
STATIONS
Dimension
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
SWITCHES
316 MULTI-SWITCH PUSHBUTTONS
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
MULTI-SWITCH PUSHBUTTONS
lu
Non-Illuminated
Switch Series
Fig. 7
Type I
4004
4095
DW3006
X (Std.)
A-590
X-(Std.)
E-5905
X
A-650
TDW-F
Type II
1
Pushbutton Series
35000
37000
X (Std.)
X (Std.)
X
X
38000
650002
67000
900003
X
X
920003
X
IBS3
X
X
1. Any pushbutton series can be specified with engraved legends.
2. Buttons are an integral part of switch assembly on Series 65000.
3. Switches stocked without pushbuttons due to wide variety that can be used.
Order buttons separately.
4. Display screens and inserts are also available in a wide choice of colors;
see “SPECIAL EFFECTS COLOR DISPLAY SCREENS AND INSERTS”.
5. Double width button
SPECIFYING NOTE:
Most pushbuttons can be specified in red, black, green, blue,
white or yellow. “Black-Screen”, amber, clear, and other colors
are also possible. Contact Switchcraft with your requirements.
6. Colored inserts are available in a wide choice of colors;
see “SERIES DW40 COLOR INSERTS”.
SERIES TDWF - “FLIP-FLOP” PUSHBUTTONS
Unique internal “flip-flop” mechanism permits button face to
change colors without electrical energy, lamps or wiring.When
pushbutton is operated, highly reflective panels inside housing
change position and use ambient light to give a bright illumi-
nated effect. Black pushbuttons are .59" (15mm) high x .63"
(16mm) wide. Display window is .315" (8mm) x .374" (9.5mm)
wide.
NOTE: “FLIP-FLOP” PUSHBUTTONS ARE DESIGNED
FOR USE WITH SERIES 92000 SWITCHES ONLY.
Order “flip-flop” pushbuttons with Series 92000 switches.
TDW-F “Flip-Flop” Pushbutton Part Numbering
TDW-F “FLIP-FLOP” PUSHBUTTON PART NUMBERING
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
SWITCHES
MULTI-SWITCH PUSHBUTTONS – SERIES X, Y, & Z GLO-BUTTON 317
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
MULTIPLE-STATION SWITCHES (continued)
MULTI-SWITCH PUSHBUTTONS
TDWF PUSHBUTTON LEGENDS (special order)
Horizontally Mounted Switches: Three, .125" (3.18 mm)
high characters, each pushbutton.
Vertically Mounted Switches: Three, .125" (3.18 mm)
high characters, each pushbutton.
MULTI-SWITCH PUSHBUTTON PART NUMBERS
Use the information below to specify colors of the pushbutton series
desired. Series TDWF must be specified separately (see page 316).
LEGEND CHARACTERS AVAILABLE
Overall Size Inch (mm)
PART
NUMBER
FIGURE
COLOR
1 through 999
A through ZZZ
Width
Height
.
-
Period
Short Dash
Arrow
Number or Pound
Dollar
“
--
&
/
Quotes
.
.
Long Dash
Ampersand
Slash
◊40001
◊40002
◊40003
◊40004
40005
Red
Black
Green
Blue
#
$
|
¢
Cent
.594 (15.09)
.974 (24.7)
1
Vertical Bar
White
Yellow
Clear
◊40008
40012
NOTE: Recommended minimum standoff for switches mounted with
TDW-F pushbutton is .5" (12.7mm).
◊40901
◊40902
◊40903
◊40904
◊40905
◊40908
◊40912
Red
Black
Green
Blue
SERIES X,Y AND Z “GLO-BUTTON”
1.219 (30.96)
.719 (18.26)
2
Non-illuminated pushbuttons provide a clearly visible legend
like illuminated pushbuttons - without lamps, wiring or power.
With button depressed, illuminator moves up behind front
screen, and legend “lights up” by efficient reflection of exter-
nal ambient light. With button in “out” position, illuminator
retracts and legend appears non-luminous. Series X - specify
for horizontal or vertical mount switches. Series Y - legends
marked across .625" (15.88 mm) dimension. For horizontal
mount switches. Series Z - legends marked across .75"
(19.05 mm) dimension. For vertical mount switches.
White
Yellow
Clear
A591
A592
Red
Black
Green
Blue
◊A593
◊A594
A595
.594 (15.09)
.594 (15.09)
4
White
Brown
Yellow
Red
◊A596
◊A598
◊E591
◊E592
◊E594
◊E595
◊E596
◊E598
Size inches (mm)
Part
Screen Illuminator
Number Figure Color
Color
Width
Height
Black
Blue
X21248◊
X51248◊
Y21248◊
Y28248◊
Y51248◊
Z21248◊
Z28248◊
Z51248
10
10
11
11
11
12
12
12
Black
White
.5
.5
Orange-Red
(12.7)
(12.7)
1.234 (31.34)
.594 (15.09)
1
White
Brown
Yellow
Black Orange-Red
Black Chartreuse
.625
.75
(15.88)
(19.05)
White Orange-Red
Black Orange-Red
◊ Available on special order only; contact Switchcraft for price and delivery.
.75
.625
Black
Chartreuse
(19.05)
(15.88)
White Orange-Red
Inch
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
NOTES
318
PHONE: 773 792-2700
* Please visit the product pages on our website for the most up-to-date product information
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
319
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
03BL2M................................................47
05BL3M................................................47
05BL5M................................................47
05CL3M ...............................................46
05CL5M ...............................................46
05DL3M ...............................................47
05DL5M ...............................................47
05GM3M..............................................46
05GM5M..............................................46
05YL3M................................................47
05YL5M................................................47
06AL5F.................................................48
06EL5F.................................................48
09BL4M................................................47
09CL4M ...............................................46
09DL4M ...............................................47
09GM4M..............................................46
09YL4M................................................47
101......................................................274
101S...................................................274
102......................................................274
102S...................................................274
103......................................................274
103S...................................................274
11..........................................................94
11001 .................................................231
11001L...............................................231
11002 .................................................231
11002L...............................................231
11003 .................................................231
11003D ..............................................231
11003DL ............................................231
11003L...............................................231
11004 .................................................231
11004L...............................................231
11005 .................................................231
11005L...............................................231
11006 .................................................231
11006D ..............................................231
11006DL ............................................231
11006L...............................................231
11008 .................................................231
11008L...............................................231
11009 .................................................231
11009L...............................................231
11012 .................................................231
11012L...............................................231
111........................................................98
111PC ..................................................98
111PCS..............................................100
11201 .................................................231
11201L...............................................231
11202 .................................................231
11202L...............................................231
11203 .................................................231
11203D ..............................................231
11203DL ............................................231
11203L...............................................231
11204 .................................................231
11204L...............................................231
11205 .................................................231
11205L...............................................231
11206 .................................................231
11206D ..............................................231
11206DL ............................................231
11206L...............................................231
11208 .................................................231
11208L...............................................231
11209 .................................................231
11209L...............................................231
11212 .................................................231
11212L...............................................231
112A.....................................................98
112APC................................................98
112APCS...........................................100
112B.....................................................98
112BPC................................................98
112BPCS...........................................100
113........................................................98
113B.....................................................98
113BPC................................................98
113BPC1M ..........................................98
113BPCS...........................................100
113D.....................................................98
113DPC ...............................................98
113E.....................................................98
113EPC................................................98
113EPCS...........................................100
113F .....................................................98
113FPC................................................98
113FPCS ...........................................100
113PC ..................................................98
113PCS..............................................100
114B.....................................................98
114BPC................................................98
114BPC1M ..........................................98
114BPCS...........................................100
120......................................................108
1200 ...................................................203
12001 .................................................297
12002 .................................................297
12003 .................................................297
12003D ..............................................297
12004 .................................................297
12005 .................................................297
12006 .................................................297
12006D ..............................................297
12010 .................................................297
12011 .................................................297
12012 .................................................297
12013 .................................................297
12014 .................................................297
12015 .................................................297
12016 .................................................297
12017 .................................................297
12033 .................................................297
12033T...............................................297
12034 .................................................297
12035 .................................................297
12036 .................................................297
12036D ..............................................297
12037 .................................................297
12037T...............................................297
121......................................................108
1230 ...................................................108
1238 ...................................................108
125......................................................109
128......................................................108
12A .......................................................94
12B .......................................................94
12BL5M................................................47
12BL6M................................................47
12CL5M ...............................................46
12DL5M ...............................................47
12DL6M ...............................................47
12GM5M..............................................46
12GM6M..............................................46
12YL5M................................................47
13..........................................................94
131......................................................108
133......................................................155
1332A.................................................203
1332B.................................................203
1334B.................................................203
1394RAPC...........................................58
1394SMT .............................................58
13A .......................................................94
13AL5F.................................................48
13AL6F.................................................48
13B .......................................................94
13E .......................................................94
13EL5F.................................................48
1400 ...................................................203
1400301.............................................203
1400315.............................................203
142A...................................................110
14B .......................................................94
151......................................................107
152......................................................107
152B...................................................107
153......................................................107
1532A.................................................203
1532A301 ..........................................203
1532B.................................................203
1532B301 ..........................................203
1534B.................................................203
154......................................................107
155......................................................107
15AL7F.................................................48
15AL8F.................................................48
15BL7M................................................47
15BL8M................................................47
15CL7M ...............................................46
15CL8M ...............................................46
15DL7M ...............................................47
15EL8F.................................................48
15GM7M..............................................46
15GM8M..............................................46
15J9068 .............................................230
15J9076 .............................................230
15J9077 .............................................230
15J9078 .............................................230
160......................................................147
1600 ...................................................212
1632A.................................................212
1632B.................................................212
1634B.................................................212
16J1055 .............................................223
170......................................................147
1700 ...................................................212
172......................................................148
173......................................................152
174S...................................................152
175......................................................152
176S...................................................152
177S...................................................152
178......................................................152
1789 ...................................................212
179......................................................152
181......................................................148
182......................................................148
182QB................................................147
182QBD.............................................147
184......................................................147
184L ...................................................147
187......................................................149
187B...................................................149
187BD................................................149
187BL.................................................149
187D...................................................149
187L ...................................................149
188......................................................149
18QA18..............................................262
18QB18..............................................262
18QD18..............................................262
18QF18..............................................262
18QH18..............................................262
18QK18..............................................262
18QN18..............................................262
190......................................................151
190A...................................................151
190B...................................................151
190BL.................................................151
201......................................................274
201S...................................................274
202......................................................274
202S...................................................274
203......................................................274
203S...................................................274
20GM8M..............................................46
20Q*20**............................................262
220......................................................153
225......................................................153
226......................................................154
227......................................................153
228......................................................153
229......................................................153
22QB22..............................................263
22QD22..............................................263
22QF22..............................................263
22QK22..............................................263
22QN22..............................................263
230......................................................153
2300......................................................86
2331......................................................86
2332A...................................................86
2332B...................................................86
2333......................................................86
235......................................................153
236......................................................154
237......................................................153
238......................................................153
239......................................................153
240......................................................145
2400 ...................................................205
2432A.................................................205
2432B.................................................205
2434B.................................................205
245......................................................145
24B.....................................................109
25........................................................109
250......................................................145
2501F ...................................................65
2501M ..................................................65
2501MP................................................65
2532A.................................................205
2532B.................................................205
2533 ...................................................205
2533B.................................................205
2534B.................................................205
2542B.................................................205
2544B.................................................205
255......................................................145
2588 ...................................................205
2589 ...................................................205
260......................................................145
2600 ...................................................205
2600301.............................................205
2600310.............................................205
267......................................................145
269......................................................145
26U1003 ............................................278
26U1004 ............................................278
26U1005 ............................................278
26U1006 ............................................278
26U1007 ............................................278
26U1008 ............................................278
26U1009 ............................................278
26U1010 ............................................278
270..............................................145-146
2732A.................................................205
2732A301 ..........................................205
2732B.................................................205
2732B301 ..........................................205
2733B.................................................205
2734B.................................................205
2734B301 ..........................................205
2789 ...................................................205
280..............................................145-146
281..............................................145-146
282......................................................155
285..............................................145-146
285L ...................................................145
288..............................................145-146
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
320
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
290..............................................145-146
297..............................................145-146
298.............................................146, 155
299......................................................150
2BL6M..................................................47
2C1072 ..............................................134
2P-1216 .............................................148
2P1248...............................................145
2P1251...............................................147
2P1298...............................................145
2P1384...............................................157
2P1419...............................................158
2P1495...............................................145
2P1509...............................................153
2P1515...............................................162
2P1624...............................................162
2P2003...............................................143
305HJ084184....................................247
305KD084184 ...................................247
306HK042306 ...................................247
306HK084306 ...................................247
321........................................................27
322........................................................27
323........................................................27
324........................................................27
32HR***..............................................240
330F1.................................................161
330F2.................................................161
332A...................................................159
336A...................................................159
336B...................................................159
33HR***..............................................240
340......................................................159
345A...................................................159
349A...................................................159
350......................................................148
3501F.................................................123
3501FP ..............................................123
3501FR ..............................................123
3501M................................................161
3501MC .............................................161
3502 ...................................................161
35021K206 ........................................303
35021K212 ........................................303
35022206...........................................303
35022212...........................................303
35027206...........................................303
35027212...........................................303
3502A.................................................161
3502AAU............................................161
3502ABAU.........................................161
3502RA..............................................161
3502RAAU.........................................161
3502RABAU ......................................161
3503 ...................................................123
35041K206 ........................................303
35041K212 ........................................303
35042206...........................................303
35042212...........................................303
35047206...........................................303
35047212...........................................303
3504M................................................161
3505F.................................................123
35061K206 ........................................303
35061K212 ........................................303
35062206...........................................303
35062212...........................................303
35067206...........................................303
35067212...........................................303
3507 ...................................................161
35081K206 ........................................303
35081K212 ........................................303
35082206...........................................303
35082212...........................................303
35087206...........................................303
35087212...........................................303
35101K206 ........................................303
35101K212 ........................................303
35102206...........................................303
35102212...........................................303
35107206...........................................303
35107212...........................................303
35121K206 ........................................303
35121K212 ........................................303
35122206...........................................303
35122212...........................................303
35127206...........................................303
35127212...........................................303
3514PC..............................................123
3515PC..............................................123
3517PC..............................................123
352A...................................................159
35581 .................................................161
35582 .................................................161
35585 .................................................161
35HDBAU ..........................................156
35HDBAUS........................................156
35HDBN.............................................156
35HDBNS..........................................156
35HDNAU..........................................156
35HDNAUS .......................................156
35HDNN ............................................156
35HDNNS..........................................156
35HDRAAU .......................................156
35HDRABAU.....................................156
35HDRANN.......................................156
35HR***..............................................240
35PM1................................................119
35PM2A.............................................119
35RAPC2AH3...........................114, 116
35RAPC2AHN2........................114, 116
35RAPC2AHN3 ................................114
35RAPC2AV ..............................114-115
35RAPC2AV4............................114-115
35RAPC2AVN4.................................114
35RAPC2BH3...........................114, 116
35RAPC2BHN2........................114, 116
35RAPC2BHN3 ................................114
35RAPC2BV4............................114-115
35RAPC2BVN4.................................114
35RAPC3BH3...........................114, 116
35RAPC3BHN2........................114, 116
35RAPC3BHN3 ................................114
35RAPC3BV4............................114-115
35RAPC3BVN4.................................114
35RAPC4BH3...........................114, 116
35RAPC4BHN2........................114, 116
35RAPC4BHN3 ................................114
35RAPC4BV4............................114-115
35RAPC4BVN4.................................114
35RAPC7J.........................................112
35RAPC7JS ......................................112
35RASMT..........................................117
35RASMT2AHNTR...........................117
35RASMT2BHNTR...........................117
35RASMT3BHNTR...........................117
35RASMT4BHNTR...........................117
361A ..........................................159, 265
362A...................................................265
363......................................................159
364A...................................................159
365......................................................159
36HR***..............................................240
37021K1206......................................305
37021K1212......................................305
370221206.........................................305
370221212.........................................305
370271206.........................................305
370271212.........................................305
37041K1206......................................305
37041K1212......................................305
370421206.........................................305
370421212.........................................305
370471206.........................................305
370471212.........................................305
37061K1206......................................305
37061K1212......................................305
370621206.........................................305
370621212.........................................305
370671206.........................................305
370671212.........................................305
37081K1206......................................305
37081K1212......................................305
370821206.........................................305
370821212.........................................305
370871206.........................................305
370871212.........................................305
370A...................................................159
37101K1206......................................305
37101K1212......................................305
371021206.........................................305
371021212.........................................305
371071206.........................................305
371071212.........................................305
37121K1206......................................305
37121K1212......................................305
371221206.........................................305
371221212.........................................305
371271206.........................................305
371271212.........................................305
374......................................................159
376......................................................159
377......................................................159
380......................................................148
38021K1206......................................305
38021K1212......................................305
380221206.........................................305
380221212.........................................305
380271206.........................................305
380271212.........................................305
38041K1206......................................305
38041K1212......................................305
380421206.........................................305
380421212.........................................305
380471206.........................................305
380471212.........................................305
38061K1206......................................305
38061K1212......................................305
380621206.........................................305
380621212.........................................305
380671206.........................................305
380671212.........................................305
38081K1206......................................305
38081K1212......................................305
380821206.........................................305
380821212.........................................305
380871206.........................................305
380871212.........................................305
38101K1206......................................305
38101K1212......................................305
381021206.........................................305
381021212.........................................305
381071206.........................................305
381071212.........................................305
38121K1206......................................305
38121K1212......................................305
381221206.........................................305
381221212.........................................305
381271206.........................................305
381271212.........................................305
383A.....................................................27
384A.....................................................27
386A.....................................................28
387A.....................................................28
389........................................................28
390........................................................28
391Q13 ................................................28
391Q23 ................................................28
391Q33 ................................................28
391Q43 ................................................28
391Q53 ................................................28
391Q63 ................................................28
40........................................................147
40001 .................................................317
40002 .................................................317
40003 .................................................317
40004 .................................................317
40005 .................................................317
40008 .................................................317
40012 .................................................317
40101 .................................................306
40103 .................................................306
40104 .................................................306
40105 .................................................306
40108 .................................................306
40112 .................................................306
40116 .................................................306
40201 .................................................306
40203 .................................................306
40204 .................................................306
40205 .................................................306
40208 .................................................306
40212 .................................................306
40401 .................................................306
40403 .................................................306
40404 .................................................306
40405 .................................................306
40408 .................................................306
40412 .................................................306
40502 .................................................306
40505 .................................................306
406......................................................306
40701 .................................................306
40703 .................................................306
40704 .................................................306
40705 .................................................306
40708 .................................................306
40901 .................................................317
40902 .................................................317
40903 .................................................317
40904 .................................................317
40905 .................................................317
40908 .................................................317
40912 .................................................317
41........................................................110
411......................................................141
412......................................................141
41203 .................................................298
41206 .................................................298
41208 .................................................298
41212 .................................................298
41306 .................................................298
41308 .................................................298
41312 .................................................298
41324 .................................................298
414......................................................141
415......................................................141
420......................................................138
425......................................................138
42A.....................................................110
43A.....................................................110
44..........................................................65
46201ME ...........................................284
46201MR ...........................................284
46202LE.............................................284
46202LR ............................................284
46202ME ...........................................284
46202MR ...........................................284
46203LE.............................................284
46203LR ............................................284
46203LSE..........................................284
46203LSR..........................................284
46203ME ...........................................284
46203MR ...........................................284
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
321
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
46204LE.............................................284
46204LR ............................................284
46204ME ...........................................284
46204MR ...........................................284
46206LE.............................................284
46206LFE ..........................................284
46206LFR..........................................284
46206LR ............................................284
46206LSE..........................................284
46206LSR..........................................284
46206ME ...........................................284
46206MP ...........................................284
46206MR ...........................................284
46256LFR..........................................284
46311LDR..........................................285
46311MDR ........................................285
46311TDR .........................................285
46313LDR..........................................285
46313MDR ........................................285
46313TDR .........................................285
47202LE.............................................286
47202LR ............................................286
47203LE.............................................286
47203LR ............................................286
47204LCE..........................................286
47204LCR..........................................286
47204LE.............................................286
47204LR ............................................286
47206LCE..........................................286
47206LCR..........................................286
47206LE.............................................286
47206LR ............................................286
47215LCR..........................................286
47215LR ............................................286
47217LCR..........................................286
47217LR ............................................286
47221LCR..........................................286
47221LR ............................................286
47227LFE ..........................................286
47227LFR..........................................286
482......................................................140
482N...................................................140
482NC................................................140
483N...................................................140
483NC................................................140
49101 .................................................232
49102 .................................................232
49105 .................................................232
49201 .................................................232
49202 .................................................232
49205 .................................................232
49301 .................................................232
49302 .................................................232
49305 .................................................232
49309L...............................................287
49309LS.............................................287
49312L...............................................287
49312LS.............................................287
49329L...............................................287
49329LS.............................................287
49331L...............................................287
49331LS.............................................287
50207L...............................................287
50207M..............................................287
50208L...............................................287
50209L...............................................287
50209LS.............................................287
50209M..............................................287
50209MS ...........................................287
50212L...............................................287
50212LS.............................................287
510......................................................106
512......................................................106
515......................................................106
516-090-000-301...............................178
516-090-000-302...............................178
516-120-000-101...............................178
516-120-000-102...............................178
516-290-500 ......................................178
516-290-590 ......................................178
520......................................................106
53B.....................................................109
54A.....................................................109
54B.....................................................109
55........................................................109
5501F ...................................................65
5501M ..................................................65
5501MF................................................65
5501MP................................................65
55HA2F................................................50
56206L1.............................................288
56206L2.............................................288
56313L1.............................................289
56313L2.............................................289
570......................................................146
57GB3F................................................49
57GB5F................................................49
57HB3F................................................50
57HB5F................................................50
57KD3M...............................................48
57NC5F................................................50
57PC3F................................................51
57PC3FS .............................................52
57PC5F................................................51
57PC5FS .............................................52
580......................................................146
581......................................................146
585......................................................146
588......................................................146
58NC3F................................................50
590......................................................146
597......................................................146
598......................................................146
59GB3F................................................49
60........................................................151
60GB4F................................................49
60HA4F................................................50
60NC4F................................................50
60PC4F................................................51
60PC4FS .............................................52
610......................................................106
612......................................................106
615......................................................106
61GB5F................................................49
61GB6F................................................49
61HA5F................................................50
61NC5F................................................50
61PC5F................................................51
61PC5FS .............................................52
61PC6F................................................51
61PC6FS .............................................52
620......................................................106
62206L...............................................290
62GB7F................................................49
62GB8F................................................49
62HB7F................................................50
62HB8F................................................50
62NC7F................................................50
62NC8F................................................50
62PC7F................................................51
62PC7FS .............................................52
62PC8F................................................51
62PC8FS .............................................52
65021K206 ........................................309
65021K212 ........................................309
65022206...........................................309
65022212...........................................309
65027206...........................................309
65027212...........................................309
65041K206 ........................................309
65041K212 ........................................309
65042206...........................................309
65042212...........................................309
65047206...........................................309
65047212...........................................309
65061K206 ........................................309
65061K212 ........................................309
65062206...........................................309
65062212...........................................309
65067206...........................................309
65067212...........................................309
65081K206 ........................................309
65081K212 ........................................309
65082206...........................................309
65082212...........................................309
65087206...........................................309
65087212...........................................309
65101K206 ........................................309
65101K212 ........................................309
65102206...........................................309
65102212...........................................309
65107206...........................................309
65107212...........................................309
65121K206 ........................................309
65121K212 ........................................309
65122206...........................................309
65122212...........................................309
65127206...........................................309
65127212...........................................309
67021K506 ........................................310
67021K512 ........................................310
67022506...........................................310
67022512...........................................310
67027506...........................................310
67027512...........................................310
67041K506 ........................................310
67041K512 ........................................310
67042506...........................................310
67042512...........................................310
67047506...........................................310
67047512...........................................310
67061K506 ........................................310
67061K512 ........................................310
67062506...........................................310
67062512...........................................310
67067506...........................................310
67067512...........................................310
67081K506 ........................................310
67081K512 ........................................310
67082506...........................................310
67082512...........................................310
67087506...........................................310
67087512...........................................310
67101K506 ........................................310
67101K512 ........................................310
67102506...........................................310
67102512...........................................310
67107506...........................................310
67107512...........................................310
67121K506 ........................................310
67121K512 ........................................310
67122506...........................................310
67122512...........................................310
67127506...........................................310
67127512...........................................310
70........................................................147
712A...................................................134
712RA................................................134
722A...................................................134
722RA................................................134
732A...................................................134
732RA................................................134
740......................................................157
745......................................................157
750......................................................157
755......................................................157
760......................................................162
760K...................................................162
761K...................................................162
765......................................................162
765K...................................................162
766K...................................................162
770......................................................157
780......................................................157
80........................................................108
820......................................................142
830......................................................108
838......................................................108
84206 .................................................296
84206L...............................................296
84212 .................................................296
84212L...............................................296
84306 .................................................296
84306L...............................................296
84312 .................................................296
84312L...............................................296
84324 .................................................296
84324L...............................................296
850.............................................121, 158
851......................................................158
852......................................................158
853......................................................158
855......................................................158
856......................................................158
857......................................................158
858......................................................158
860......................................................162
865......................................................162
88........................................................108
880......................................................158
881......................................................158
882......................................................158
883......................................................158
90........................................................151
90022B06 ..........................................312
90022B12 ..........................................312
90024B06 ..........................................312
90024B12 ..........................................312
90027B06 ..........................................312
90027B12 ..........................................312
90042B06 ..........................................312
90042B12 ..........................................312
90044B06 ..........................................312
90044B12 ..........................................312
90047B06 ..........................................312
90047B12 ..........................................312
90062B06 ..........................................312
90062B12 ..........................................312
90064B06 ..........................................312
90064B12 ..........................................312
90067B06 ..........................................312
90067B12 ..........................................312
90082B06 ..........................................312
90082B12 ..........................................312
90084B06 ..........................................312
90084B12 ..........................................312
90087B06 ..........................................312
90087B12 ..........................................312
90102B06 ..........................................312
90102B12 ..........................................312
90104B06 ..........................................312
90104B12 ..........................................312
90117B06 ..........................................312
90117B12 ..........................................312
90122B06 ..........................................312
90122B12 ..........................................312
90124B06 ..........................................312
90124B12 ..........................................312
90127B06 ..........................................312
90127B12 ..........................................312
903......................................................273
903D...................................................273
9115......................................................30
9129......................................................30
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
322
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
913......................................................273
913D...................................................273
9144......................................................30
921.............................................245, 276
921K ..........................................245, 276
923......................................................273
923D...................................................273
9244......................................................30
933......................................................273
933D...................................................273
951......................................................273
952......................................................273
953......................................................273
961......................................................273
962......................................................273
963......................................................273
97GV***..............................................244
982A01R............................................269
982A03R............................................269
982A06R............................................269
99GD0726 .........................................244
99GV***..............................................244
A1600.................................................212
A1632B ..............................................212
A1634B ..............................................212
A3F......................................................4-5
A3F01.....................................................5
A3F02.....................................................5
A3F03.....................................................5
A3F04.....................................................5
A3F05.....................................................5
A3F06.....................................................5
A3F07.....................................................5
A3F08.....................................................5
A3F09.....................................................5
A3FB.......................................................4
A3FBAU .................................................4
A3FD ......................................................4
A3FL.......................................................4
A3FS.......................................................4
A3M.....................................................4-5
A3M01....................................................5
A3M02....................................................5
A3M03....................................................5
A3M04....................................................5
A3M05....................................................5
A3M06....................................................5
A3M07....................................................5
A3M08....................................................5
A3M09....................................................5
A3MB......................................................4
A3MBAU ................................................4
A3ML......................................................4
A3MS......................................................4
A4F.........................................................4
A4FB.......................................................4
A4FBAU .................................................4
A4FD ......................................................4
A4FL.......................................................4
A4M ........................................................4
A4MB......................................................4
A4MBAU ................................................4
A4ML......................................................4
A591...................................................317
A592...................................................317
A593...................................................317
A594...................................................317
A595...................................................317
A596...................................................317
A598...................................................317
A5F.........................................................4
A5FB.......................................................4
A5FBAU .................................................4
A5FD ......................................................4
A5FL.......................................................4
A5M ........................................................4
A5MB......................................................4
A5MBAU ................................................4
A5ML......................................................4
A6501.................................................312
A6502.................................................312
A6503.................................................312
A6504.................................................312
A6505.................................................312
A6508.................................................312
A6F.........................................................4
A6FB.......................................................4
A6FBAU .................................................4
A6M ........................................................4
A6MBAU ................................................4
A7F.........................................................4
A7FB.......................................................4
A7FBAU .................................................4
A7M ........................................................4
A7MBAU ................................................4
AA3F.......................................................4
AA3FB....................................................4
AA3FBAU...............................................4
AA3FD....................................................4
AA3FL ....................................................4
AA3FLD..................................................4
AA3M......................................................4
AA3MB...................................................4
AA3MBAU..............................................4
AA3ML....................................................4
AA4F.......................................................4
AA4FB....................................................4
AA4FD....................................................4
AA4FL ....................................................4
AA4M......................................................4
AA4ML....................................................4
AA5F.......................................................4
AA5FB....................................................4
AA5FD....................................................4
AA5FL ....................................................4
AA5M......................................................4
AA5MB...................................................4
AA5ML....................................................4
AA6F.......................................................4
AA6FB....................................................4
AA6FD....................................................4
AA6FL ....................................................4
AA6M......................................................4
AA6ML....................................................4
AA7F.......................................................4
AA7FB....................................................4
AA7FD....................................................4
AA7FL ....................................................4
AA7M......................................................4
AA7ML....................................................4
AAA*F.....................................................6
AAA*M....................................................6
AD1600..............................................212
AD1632B ...........................................212
AD1634..............................................212
AQGP322...............................................4
AQGP323...............................................4
B1600.................................................212
B1632B ..............................................212
B1634B ..............................................212
B1650.................................................212
B1700.................................................212
B1795.................................................212
B1796.................................................212
B3F.......................................................10
B3FB ....................................................10
B3M......................................................10
B3MB....................................................10
B4F.......................................................10
B4M......................................................10
B5F.......................................................10
B5M......................................................10
B6F.......................................................10
B6M......................................................10
B7F.......................................................10
B7M......................................................10
BD1600..............................................212
BD1632B ...........................................212
BD1634B ...........................................212
BD1650..............................................212
BD1700..............................................212
BD1795..............................................212
BD1796..............................................212
BPJF01 ..............................................123
BPJF01AU.........................................123
BPJF02 ..............................................123
BPJF02AU.........................................123
BPJF03 ..............................................123
BPJF03AU.........................................123
BPJF04 ..............................................123
BPJF04AU.........................................123
BPJF05 ..............................................123
BPJF05AU.........................................123
BPJF06 ..............................................123
BPJF06AU.........................................123
BPJJ01...............................................123
BPJJ01AU .........................................123
BPJJ02...............................................123
BPJJ02AU .........................................123
BPJJ03...............................................123
BPJJ03AU .........................................123
BPJJ04...............................................123
BPJJ04AU .........................................123
BPJJ05...............................................123
BPJJ05AU .........................................123
BPJJ06...............................................123
BPJJ06AU .........................................123
BPJR01..............................................123
BPJR01AU.........................................123
BPJR02..............................................123
BPJR02AU.........................................123
BPJR03..............................................123
BPJR03AU.........................................123
BPJR04..............................................123
BPJR04AU.........................................123
BPJR05..............................................123
BPJR05AU.........................................123
BPJR06..............................................123
BPJR06AU.........................................123
BXR011..............................................272
BXR0110 ...........................................272
BXR011PC........................................272
BXR013..............................................272
BXR013P...........................................272
BXR016..............................................272
BXR016P...........................................272
BXR021..............................................272
BXR0210 ...........................................272
BXR021PC........................................272
BXR023..............................................272
BXR023P...........................................272
BXR026..............................................272
BXR026PC........................................272
BXR03................................................272
BXR0310 ...........................................272
BXR0310PC......................................272
BXR031PC........................................272
BXR033..............................................272
BXR033PC........................................272
BXR036..............................................272
BXR036PC........................................272
BXR051..............................................272
BXR0510 ...........................................272
BXR051PC........................................272
BXR053..............................................272
BXR053PC........................................272
BXR056..............................................272
BXR056PC........................................272
C11.......................................................94
C12A ....................................................94
C12B ....................................................94
C1600.................................................212
C1634B..............................................212
C240...................................................145
C245...................................................145
C270...................................................145
C3F.......................................................10
C3M......................................................10
C46203LR..........................................284
C46204MR ........................................284
C46206LFR.......................................284
C46206LR..........................................284
C4F.......................................................10
C4M......................................................10
C55B ..................................................109
C56206L1 ..........................................288
C56206L2 ..........................................288
C56313L1 ..........................................289
C56313L2 ..........................................289
C5F.......................................................10
C5M......................................................10
C62206L ............................................290
C63212L ............................................290
C6F.......................................................10
C6M......................................................10
C7F.......................................................10
C7M......................................................10
CB3F ....................................................65
CB3M ...................................................65
CD1600..............................................212
CD1634B ...........................................212
CMT331 ...............................................83
CMT332 ...............................................83
CMT332A.............................................83
CMT332B.............................................83
CMT332C ............................................84
CMT333 ...............................................83
CMT333A.............................................83
CMT333B.............................................84
CMT334-B ...........................................83
CMT334A.............................................83
CMT334C ............................................83
CMT334E.............................................83
CMT334F.............................................83
CMT335 ...............................................83
CMT335A.............................................84
CMT336 ...............................................83
CMT336A.............................................83
CMT336B.............................................83
CMT336C ............................................83
CMT336D ............................................83
CMT336E.............................................83
CMT337 ...............................................83
CMT338 ...............................................83
CMT339 ...............................................83
CMT341 ...............................................84
CMT342B.............................................84
CMT344B.............................................84
CMT346 ...............................................83
CMT346C ............................................84
CMT351C ............................................83
CMT354F.............................................83
CMT356C ............................................83
CMT358 ...............................................83
CMT359 ...............................................83
CN11..................................................109
CN12A ...............................................109
CN12B ...............................................109
CN13B ...............................................109
CPC102A...........................................263
CPC102D...........................................263
CPC102F...........................................263
CPC102K...........................................263
CPC102N...........................................263
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
323
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
CPC102R...........................................263
CPC102T...........................................263
CPC102U...........................................263
D1600.................................................212
D1632A..............................................212
D1632B..............................................212
D1634B..............................................212
D1700.................................................212
D1789.................................................212
D3F.........................................................9
D3FB ......................................................9
D3FBAU.................................................9
D3FD......................................................9
D3FDB....................................................9
D3M........................................................9
D3MB .....................................................9
D3MBAU ................................................9
D4F.........................................................9
D4FB ......................................................9
D4FBAU.................................................9
D4M........................................................9
D4MB .....................................................9
D4MBAU ................................................9
D5F.........................................................9
D5FB ......................................................9
D5FBAU.................................................9
D5M........................................................9
D5MB .....................................................9
D5MBAU ................................................9
D6F.........................................................9
D6FB ......................................................9
D6FBAU.................................................9
D6FDB....................................................9
D6M........................................................9
D6MB .....................................................9
D6MBAU ................................................9
D7F.........................................................9
D7FB ......................................................9
D7FBAU.................................................9
D7M........................................................9
D7MB .....................................................9
D7MBAU ................................................9
DA013 ................................................275
DA023 ................................................275
DA033 ................................................275
DA043 ................................................275
DA053 ................................................275
DA083 ................................................275
DMD*FRA***........................................53
DS301................................................236
DS302................................................236
DS303................................................236
DS306................................................236
DS307................................................236
DS308................................................236
DS311................................................237
DS312................................................237
DS313................................................237
DS316................................................236
DS317................................................236
DS318................................................236
DS321................................................238
DS322................................................238
DS323................................................238
DS350................................................238
DS351................................................238
DS352................................................238
DS353................................................238
DUSB ...................................................56
DW05 .................................................311
DW1 ...................................................311
DW101 ...............................................311
DW102 ...............................................311
DW201 ...............................................311
DW202 ...............................................311
DW205 ...............................................311
DW3 ...................................................311
DW301 ...............................................310
DW302 ...............................................310
DW303 ...............................................310
DW304 ...............................................310
DW305 ...............................................310
DW308 ...............................................310
DW312 ...............................................310
DW313 ...............................................310
DW316 ...............................................310
DW4 ...................................................311
DW41 .................................................310
DW43 .................................................310
DW44 .................................................310
DW45 .................................................310
DW47 .................................................310
DW48 .................................................310
DW7 ...................................................311
E*F........................................................12
E*M.......................................................12
E111L.................................................107
E112BL ..............................................107
E591...................................................317
E592...................................................317
E594...................................................317
E595...................................................317
E596...................................................317
E598...................................................317
E903...................................................276
E903D................................................276
E913...................................................276
E913D................................................276
EAC225................................................71
EAC227................................................70
EAC233................................................70
EAC233S .............................................70
EAC305................................................70
EAC309................................................70
EAC311................................................70
EAC315................................................70
EAC319................................................70
EAC323................................................70
EAC325................................................70
EAC327................................................70
EAC333................................................70
EAC333S .............................................70
EAC405................................................70
EAC409................................................70
EAC411................................................70
EAC413................................................70
EAC451................................................70
EAC453................................................70
EAC455................................................70
EAC457................................................70
ED903................................................276
ED903D .............................................276
ED913................................................276
ED913D .............................................276
EH13942..............................................16
EHBNC2 ..............................................16
EHBNCSC...........................................16
EHCAT62.............................................16
EHRCA2 ..............................................16
EHRCABNC ........................................16
EHUSB2...............................................16
EN3C**.................................................43
EN3CR.................................................42
EN3CRAUTO ......................................42
EN3I**...................................................45
EN3INS16............................................42
EN3INS20............................................42
EN3P**.................................................44
EN3POS16..........................................42
EN3POS20..........................................42
EP903 ................................................276
EP903D..............................................276
EP913 ................................................276
EP913D..............................................276
EPS1PC1...........................................291
EPS1PC2...........................................291
EPS1PC3...........................................291
EPS1SL1 ...........................................291
EPS2PC1...........................................291
EPS2PC2...........................................291
EPS2PC3...........................................291
EPS3PC1...........................................291
EPS3PC2...........................................291
EPS3PC3...........................................291
EPS3SL1 ...........................................291
EPS4PC1...........................................291
EPS4PC2...........................................291
EPS4PC3...........................................291
F3FRAF ...............................................23
F3FSTF................................................23
F3MRAF...............................................23
F3SM3F ...............................................23
FA11 .....................................................94
FAL11...................................................94
G3MS...................................................26
G4MS...................................................26
G6083 ................................................296
G6084 ................................................296
H101...................................................275
H101PC .............................................275
H102...................................................275
H102PC .............................................275
H103...................................................275
H103D................................................275
H103PC .............................................275
H201...................................................275
H201PC .............................................275
H202...................................................275
H202PC .............................................275
H203...................................................275
H203D................................................275
H203PC .............................................275
H3MS ...................................................26
H4MS ...................................................26
HP75BNC1..........................................66
HP75BNC10........................................66
HP75BNC12........................................66
HP75BNC2..........................................66
HP75BNC6..........................................66
HP75BNC7..........................................66
HP75BNC9..........................................66
HPCC4F...............................................38
HPCC4FRA.........................................38
HPCI4F ................................................38
HPCP*4................................................40
HPCPK112F......................................190
HPCPK112F1....................................190
HPCPK1B..........................................190
HPCPK324F......................................190
HPCPK324F1....................................190
HPCPK3B..........................................190
IBS10B02106AR...............................314
IBS10B04106AR...............................314
IBS10B06106AR...............................314
IBS10B08106AR...............................314
IBS10B10106AR...............................314
IBS10B12106AR...............................314
IBS15B02106AR...............................314
IBS15B04106AR...............................314
IBS15B06106AR...............................314
IBS15B08106AR...............................314
IBS15B10106AR...............................314
IBS15B12106AR...............................314
IBS20B02106AR...............................314
IBS20B04106AR...............................314
IBS20B06106AR...............................314
IBS20B08106AR...............................314
IBS20B10106AR...............................314
IBS20B12106AR...............................314
J3FS.....................................................26
J4MS ....................................................26
JP012000...........................................207
JP012S32A........................................207
JP012S32B1 .....................................207
JP012S34B1 .....................................207
JP022000...........................................207
JP022S32A........................................207
JP022S32B........................................207
JP022S34B........................................207
JP032000...........................................207
JP032S32A........................................207
JP032S32B........................................207
JP032S34B........................................207
JP042000...........................................207
JP042S32A........................................207
JP042S32B........................................207
JP042S34B........................................207
JP052000...........................................207
JP052S32A........................................207
JP052S32B........................................207
JP052S34B........................................207
JP062000...........................................207
JP062S32A........................................207
JP062S32B........................................207
JP062S34B........................................207
JP072000...........................................207
JP072S32A........................................207
JP072S32B........................................207
JP072S34B........................................207
JP082000...........................................207
JP082S32A........................................207
JP082S32B........................................207
JP082S34B........................................207
JP092000...........................................207
JP092S32A........................................207
JP092S32B........................................207
JP092S34B........................................207
JP102000...........................................207
JP102S32A........................................207
JP102S32B........................................207
JP102S34B........................................207
JP112000...........................................207
JP112S32A........................................207
JP112S32B........................................207
JP112S34B........................................207
JP122000...........................................207
JP122S32A........................................207
JP122S32B........................................207
JP122S34B........................................207
JP312000...........................................210
JP322000...........................................210
JP9902...............................................207
JP9922...............................................207
JP9942...............................................207
JPD312000........................................210
JPD322000........................................210
K131...................................................296
K255 .......................................................5
K3FS ....................................................26
K459...................................................163
K460...................................................163
K4FS ....................................................26
L11........................................................94
L112A...................................................98
L112APC..............................................98
L112B...................................................98
L113B...................................................98
L114B...................................................98
L114BPC..............................................98
L12A.....................................................94
L12B.....................................................94
L3MN....................................................30
L4MN....................................................30
L5MN....................................................30
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
324
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
L712A.................................................134
L712RA..............................................134
L722A.................................................134
L722RA..............................................134
LUS001..............................................271
LUS001PC.........................................271
LUS001ST.........................................271
M111 ....................................................97
M112A..................................................97
M112APC ............................................97
M112B..................................................97
M112BPC ............................................97
M113B..................................................97
M113E..................................................97
M113PPC1M.......................................97
M114B..................................................97
M114BPC ............................................97
M114BPC1M.......................................97
M3M .....................................................30
M4M .....................................................30
M5M .....................................................30
MBPK175T........................................201
MD10..................................................249
MD15..................................................249
MD3....................................................249
MD6....................................................249
MDPC2A............................................121
MDPC2AR.........................................121
MDPC2ARA ......................................121
MDSL2A ............................................121
MDSL2ARA.......................................121
MDSMT2ARATR...............................120
MDSMT2BRATR...............................120
MDSMT3BRATR...............................120
MDSMT4BRATR...............................120
ML112B................................................97
MN111..................................................97
MN112A...............................................97
MN112APC..........................................97
MN112B...............................................97
MN112BPC..........................................97
MN113B...............................................97
MN113BPC..........................................97
MN113E...............................................97
MN114B...............................................97
MN114BPC..........................................97
MN122A...............................................97
MNL112B.............................................97
MNL113B.............................................97
MT331..................................................83
MT332..................................................83
MT332A ...............................................83
MT332B ...............................................83
MT332C ...............................................83
MT333..................................................83
MT333A ...............................................84
MT333B ...............................................83
MT333E ...............................................83
MT334A ...............................................83
MT334B ...............................................83
MT334C ...............................................83
MT334E ...............................................83
MT334F................................................83
MT335..................................................83
MT335A ...............................................84
MT336..................................................83
MT336A ...............................................83
MT336B ...............................................83
MT336C ...............................................83
MT336D ...............................................83
MT336E ...............................................83
MT337..................................................83
MT338..................................................83
MT339..................................................83
MT342B ...............................................83
MT343B ...............................................84
MT344B ...............................................83
MT346..................................................83
MT346A ...............................................84
MT346B ...............................................84
MT346C ...............................................84
MT352A ...............................................83
MT354B ...............................................83
MT355..................................................83
MT356C ...............................................83
MT357..................................................83
MT388..................................................85
MT389..................................................85
MT48FN.............................................184
MT48HN ............................................184
MT48K1FN........................................182
MT48K1HN........................................182
MT48K1NN........................................182
MT48K1NS........................................182
MT48K3FN........................................182
MT48K3HN........................................182
MT48K3NN........................................182
MT48NN ............................................184
MT48NS.............................................184
MT52FN.............................................184
MT52HN ............................................184
MT52K1FN........................................182
MT52K1HN........................................182
MT52K1NN........................................182
MT52K1NS........................................182
MT52K3FN........................................182
MT52K3HN........................................182
MT52K3NN........................................182
MT52NN ............................................184
MT52NS.............................................184
MTP24K7...........................................174
MTP48K1NO.....................................166
MTP48K1NS .....................................166
MTP48K3BPNS................................174
MTP48K3NO.....................................166
MTP48K3NS .....................................166
MTP48K3PBNO................................174
MTP48K3SNO ..................................166
MTP52K3BPNO................................174
MTPFA48K1NO ................................164
MTPFA48K1NS.................................164
MTPH48K1NO..................................171
MTPH48K1NS...................................171
MTPH48K3NO..................................171
MTPH48K3NS...................................171
MTPH48K3SNO ...............................171
MVJ*75T............................................137
MVJ*NT..............................................137
MVP32K1*75T ..................................196
MVP32K1*NT....................................196
MVP32K3*75T ..................................196
MVP32K3*NT....................................196
N111.....................................................98
N111PC ...............................................98
N111PCS...........................................100
N112A ..................................................98
N112APC.............................................98
N112APCS........................................100
N112B ..................................................98
N112BPC.............................................98
N112BPCS........................................100
N113.....................................................98
N113B ..................................................98
N113BPC.............................................98
N113BPCS........................................100
N114B ..................................................98
N114BPC.............................................98
N114BPCS........................................100
N3MS ...................................................25
NL111...................................................98
NL112A................................................98
NL112B................................................98
NL113B................................................98
NL114B................................................98
NL114BPC...........................................98
NL114BPCS......................................100
P2290.................................................230
P2315.................................................230
P2316.................................................230
P23491...............................................271
P234913.............................................271
P23492...............................................271
P23493...............................................271
P23494...............................................271
P23495...............................................271
P23497...............................................271
P23498...............................................271
P2456.................................................230
P286301...............................................91
P286302...............................................91
P286304...............................................91
P286305...............................................91
P286307...............................................91
P286308...............................................91
P286401...............................................91
P286402...............................................91
P286404...............................................91
P286405...............................................91
P286407...............................................91
P286408...............................................91
P2912.................................................297
P2936 ........................................270, 314
P2937 ........................................270, 314
P2938 ........................................270, 314
P2939 ........................................270, 314
P2940 ........................................270, 314
P2941 ........................................270, 314
P2942 ........................................270, 314
P2943 ........................................270, 314
P2951 ........................................270, 314
P2952 ........................................270, 314
P2953 ........................................270, 314
P2954 ........................................270, 314
P2955 ........................................270, 314
P2956 ........................................270, 314
P2957 ........................................270, 314
P2958 ........................................270, 314
P2979.................................................314
P2992.................................................314
P3F.........................................................8
P3M ........................................................8
P4F.........................................................8
P4M ........................................................8
P5F.........................................................8
P5M ........................................................8
PC12A..................................................94
PC142A..............................................110
PC712A..............................................134
PC722A..............................................134
PC732A..............................................134
PCL712A ...........................................134
PCL722A ...........................................134
PD3F***................................................20
PD3M***...............................................20
PJRAN1X1U01 .................................126
PJRAN1X1U02 .................................126
PJRAN1X1U03 .................................126
PJRAN1X1U04 .................................126
PJRAN2X1U01 .................................126
PJRAN2X1U02 .................................126
PJRAN3X1U01 .................................126
PJRAN3X1U02 .................................126
PJRAS1X1S01..................................126
PJRAS1X1S02..................................126
PJRAS1X1S03..................................126
PJRAS1X1S04..................................126
PJRAS1X2S01..................................126
PJRAS1X2S02..................................126
PJRAS1X3S01..................................126
PJRAS1X3S02..................................126
PJRAS1X3U01..................................126
PJRAS2X1S01..................................126
PJRAS2X1S02..................................126
PJRAS2X2S01..................................126
PJRAS3X1S01..................................126
PJRAS3X1S02..................................126
PJRAS3X2S01..................................126
PJRAS3X2S02..................................126
PJRAS4X2U01..................................126
PL102.................................................278
PL103205 ..........................................277
PL103705 ..........................................277
PL106205 ..........................................277
PL106705 ..........................................277
PL111.................................................278
PL112205 ..........................................277
PL112705 ..........................................277
PL123705 ..........................................277
PL126205 ..........................................277
PL126705 ..........................................277
PL202.................................................278
PL203205 ..........................................277
PL203705 ..........................................277
PL206205 ..........................................277
PL206705 ..........................................277
PL211.................................................278
PL212205 ..........................................277
PL212705 ..........................................277
PL226205 ..........................................277
PL226705 ..........................................277
PL303.................................................278
PL305.................................................278
PL308.................................................278
PL403205 ..........................................277
PL403705 ..........................................277
PL406205 ..........................................277
PL406705 ..........................................277
PL412205 ..........................................277
PL412705 ..........................................277
PL501.................................................278
PL503.................................................278
PL503205 ..........................................277
PL504.................................................278
PL505.................................................278
PL506205 ..........................................277
PL506705 ..........................................277
PL508.................................................278
PL512.................................................278
PL512205 ..........................................277
PL512705 ..........................................277
PL513.................................................278
PL703705 ..........................................277
PL706205 ..........................................277
PL706705 ..........................................277
PL712205 ..........................................277
PL712705 ..........................................277
PL803205 ..........................................277
PL803705 ..........................................277
PL806205 ..........................................277
PL806705 ..........................................277
PL812205 ..........................................277
PL812705 ..........................................277
PL9105...............................................278
PL9205...............................................278
PPT ....................................................163
PQG3F***.............................................18
PQG3M***............................................18
PT1LA................................................163
PT2B ..................................................163
QG3F....................................................25
QG3FD.................................................25
QG3FDPC ...........................................25
QG3M...................................................25
QG4F....................................................25
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
325
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
QG4FD.................................................25
QG4M...................................................25
QG5F....................................................25
QG5FD.................................................25
QG5M...................................................25
QG6F....................................................25
QG6FD.................................................25
QG6M...................................................25
QG7F....................................................25
QG7FD.................................................25
QG7M...................................................25
QGP322.................................................4
QGP323.................................................4
QGP326...............................................10
QGP327...............................................10
QGP362.................................................9
QGP363.................................................9
QGPK116FB .....................................188
QGPK116MB ....................................188
QGPK18M8FB..................................188
QGPK1B............................................188
QGPK332MFB..................................188
QGPK3B............................................188
R3FZ.......................................................8
R3MZ......................................................8
R4FZ.......................................................8
R4MZ......................................................8
R5FZ.......................................................8
R5MZ......................................................8
R6FZ.......................................................8
R6MZ......................................................8
R7FZ.......................................................8
R7MZ......................................................8
RA200................................................256
RA202................................................257
RA205................................................256
RA207................................................257
RA208................................................257
RA217................................................257
RA35 ..................................................255
RA353................................................247
RA354................................................247
RA355................................................247
RA356.........................................246-247
RA357................................................247
RA358................................................247
RA359................................................247
RA373................................................247
RA374.........................................246-247
RA375................................................247
RA376................................................247
RA377................................................247
RA378................................................247
RA379................................................247
RA40 ..................................................255
RA41 ..................................................255
RA49B11 ...........................................103
RA49B12A.........................................103
RA49B12B.........................................103
RA49B14B.........................................103
RA49C11 ...........................................103
RA49C12A.........................................103
RA49C12B.........................................103
RA49C14B.........................................103
RA700................................................254
RA70B11 ...........................................103
RA70B12A.........................................103
RA70B12B.........................................103
RA70B14B.........................................103
RA70C11 ...........................................103
RA70C12A.........................................103
RA70C12B.........................................103
RA70C14B.........................................103
RA710................................................254
RA712A..............................................241
RA722A..............................................241
RA760................................................241
RA765................................................241
RA850................................................253
RAPC322.............................................78
RAPC712...........................................130
RAPC722...........................................130
RAPC732...........................................130
RAPC732OF .....................................130
RAPC742...........................................130
RAPC742OF .....................................130
RAPC752...........................................130
RAPC752S........................................130
RASH712...........................................130
RASH722...........................................130
RASH732...........................................130
RASM712 ..........................................130
RASM722 ..........................................130
RASM732 ..........................................130
RASM742TR.....................................130
RASM752STR...................................130
RASM752TR.....................................130
RN111PC...........................................103
RN112APC........................................103
RN112BPC........................................103
RN113BPC........................................103
RN113FPC........................................103
RN114BPC........................................103
RS422H48N081................................191
RS422H4N081..................................192
RS422H4N161..................................191
RS422H4N162 ..........................191-192
RS422H4N242 ..........................191-192
RS422PH4N081........................191-192
RS422PH4N161 ...............................191
RS422PH4N162........................191-192
RS422PH4N242........................191-192
RS422PV4N081........................191-192
RS422PV4N161................................191
RS422PV4N162........................191-192
RS422PV4N242........................191-192
RS422PV4N322........................191-192
RS422V4N081...........................191-192
RS422V4N161 ..................................191
RS422V4N162...........................191-192
RS422V4N242...........................191-192
RS422V4N322...........................191-192
RTT34B01............................................91
RTT34B02............................................91
RTT34B04............................................91
RTT34B05............................................91
RTT34B07............................................91
RTT34B08............................................91
RTT8701..............................................91
RTT8702..............................................91
RTT8704..............................................91
RTT8705..............................................91
RTT8707..............................................91
RTT8708..............................................91
S11 .......................................................94
S112BPC.............................................98
S112BPCS ........................................100
S12A.....................................................94
S12B.....................................................94
S13B.....................................................94
S230...................................................153
S250...................................................151
S260...................................................151
S267...................................................151
S280 ..........................................146, 151
S3F5M..................................................29
S3FM....................................................28
S4FM....................................................28
S580...................................................146
S5F3M..................................................29
S5FM....................................................28
S760...................................................162
S760K ................................................162
S761K ................................................162
S765...................................................162
S765K ................................................162
S766K ................................................162
S830...................................................108
SL01.....................................................61
SL02.....................................................61
SL03.....................................................61
SL04.....................................................61
SL05................................................61-62
SL102F.................................................63
SL102M................................................63
SL103F.................................................63
SL103M................................................63
SL104F.................................................63
SL104M................................................63
SL105F.................................................63
SL105M................................................63
SL172F.................................................63
SL173F.................................................63
SL173M................................................63
SL174F.................................................63
SL174M................................................63
SL175F.................................................63
SL175M................................................63
SL18.....................................................64
SL182F.................................................64
SL182M................................................64
SL183F.................................................64
SL183M................................................64
SL184F.................................................64
SL184M................................................64
SL185F.................................................64
SL185M................................................64
SL402F.................................................62
SL402M................................................62
SL403F.................................................62
SL403M................................................62
SL404F.................................................62
SL404M................................................62
SL405F.................................................62
SL405M................................................62
SL412F.................................................62
SL413F.................................................62
SL413M................................................62
SL414F.................................................62
SL414M................................................62
SL415F.................................................62
SL415M................................................62
SMD*FRA***........................................53
SN37A11 ...........................................103
SN37A12A.........................................103
SN37A12B.........................................103
SN37A14B.........................................103
SN49A11 ...........................................103
SN49A12A.........................................103
SN49A12B.........................................103
SN49A14B.........................................103
SN49B11 ...........................................103
SN49B12A.........................................103
SN49B12B.........................................103
SN49B14B.........................................103
SN49C11 ...........................................103
SN49C12A.........................................103
SN49C12B.........................................103
SN49C14B.........................................103
SN70B11 ...........................................103
SN70B12A.........................................103
SN70B12B.........................................103
SN70B14B.........................................103
SN70C11 ...........................................103
SN70C12A.........................................103
SN70C12B.........................................103
SN70C14B.........................................103
SR00.......................................................5
SR01.......................................................5
SR02.......................................................5
SR03.......................................................5
SR04.......................................................5
SR05.......................................................5
SR06.......................................................5
SR07.......................................................5
SR08.......................................................5
SR09.......................................................5
ST121.................................................257
ST125.................................................256
ST131.................................................257
ST200.................................................257
ST230.................................................257
ST303.................................................247
ST304.................................................247
ST305.................................................247
ST306.................................................247
ST307.........................................246-247
ST308.................................................247
ST309.................................................247
ST323.................................................247
ST324.........................................246-247
ST325.................................................247
ST326.................................................247
ST327.................................................247
ST328.................................................247
ST329.................................................247
ST35...................................................255
ST40...................................................255
ST60...................................................255
ST600.................................................250
ST603.................................................250
ST604.................................................250
ST605.................................................250
ST626.................................................250
ST700.................................................254
ST710.................................................254
ST740.................................................254
ST750.................................................254
ST760.................................................241
ST765.................................................241
ST850.................................................253
ST90...................................................258
ST900.................................................245
ST900F ..............................................245
ST91...................................................258
SUSB....................................................56
T127410.............................................297
T12742...............................................297
T12745...............................................297
T3F .........................................................9
T3FL .......................................................9
T3FLM....................................................9
T3FM......................................................9
T4F .........................................................9
T4FL .......................................................9
T4FLM....................................................9
T4FM......................................................9
TA01 .....................................................31
TA02 .....................................................31
TA03 .....................................................31
TA04 .....................................................31
TA05 .....................................................31
TA06 .....................................................31
TA3F................................................31-32
TA3FB...................................................32
TA3FL...................................................32
TA3FLB ................................................32
TA3M...............................................31-32
TA3MB..................................................32
TA3ML..................................................32
TA4F.....................................................32
TA4FB...................................................32
TA4FL...................................................32
TA4FLB ................................................32
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
326
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
TA4M ....................................................32
TA4MB..................................................32
TA4ML..................................................32
TA5F.....................................................32
TA5FL...................................................32
TA5FLB ................................................32
TA5M ....................................................32
TA5ML..................................................32
TA5MLB................................................32
TA6FL...................................................32
TA6ML..................................................32
TA7FL...................................................32
TA7ML..................................................32
TA8FL...................................................32
TA8ML..................................................32
TAD2...................................................142
TAD3...................................................142
TB3M....................................................33
TB3MB.................................................33
TB4M....................................................33
TB4MB.................................................33
TB5M....................................................33
TB5MB.................................................33
TB6M....................................................33
TB7M....................................................33
TB8M....................................................33
TBA03 ..................................................37
TBA04 ..................................................37
TBA05 ..................................................37
TBA06 ..................................................37
TLP4.....................................................33
TLP6.....................................................33
TQG3F.................................................37
TQG3M ................................................37
TQG4F.................................................37
TQG4M ................................................37
TQG5F.................................................37
TQG5M ................................................37
TQG6F.................................................37
TQG6M ................................................37
TR1PC ...............................................121
TR2A..................................................121
TRA**M................................................34
TRA3M.................................................34
TRA6M.................................................34
TRA6MF...............................................34
TRG4M ................................................33
TRGS4F...............................................33
TT** ....................................................267
TT101.................................................265
TT102.................................................265
TT103.................................................265
TT104.................................................265
TT105.................................................265
TT106.................................................265
TT107.................................................265
TT108.................................................265
TT109.................................................265
TT110.................................................265
TT111.................................................265
TT112.................................................265
TT113.................................................265
TT114.................................................265
TT115.................................................265
TT121.................................................265
TT122.................................................265
TT123.................................................265
TT124.................................................265
TT125.................................................265
TT126.................................................265
TT127.................................................265
TT128.................................................265
TT129.................................................265
TT130.................................................265
TT131.................................................265
TT132.................................................265
TT133.................................................265
TT134.................................................265
TT135.................................................265
TT141.................................................265
TT142.................................................265
TT143.................................................265
TT144.................................................265
TT145.................................................265
TT146.................................................265
TT147.................................................265
TT148.................................................265
TT149.................................................265
TT150.................................................265
TT151.................................................265
TT152.................................................265
TT153.................................................265
TT154.................................................265
TT155.................................................265
TT161.................................................265
TT162.................................................265
TT163.................................................265
TT164.................................................265
TT165.................................................265
TT166.................................................265
TT167.................................................265
TT168.................................................265
TT169.................................................265
TT170.................................................265
TT171.................................................265
TT172.................................................265
TT173.................................................265
TT174.................................................265
TT175.................................................265
TT201.................................................234
TT202.................................................234
TT203.................................................234
TT204.................................................234
TT205.................................................234
TT206.................................................234
TT207.................................................234
TT208.................................................234
TT209.................................................234
TT210.................................................234
TT251.................................................143
TT252.................................................143
TT253 ..........................................90, 143
TT253N..............................................143
TT253NC ...........................................143
TT254.................................................143
TT254N..............................................143
TT254NC ...........................................143
TT261.................................................144
TT263 ..........................................90, 144
TT281.................................................265
TT282.................................................265
TT283.................................................265
TT284.................................................265
TT289.................................................265
TT2W48MCF1...................................223
TT2W48MCN1..................................223
TT2W48VCF1 ...................................223
TT2W48VCN1...................................223
TT30.....................................................87
TT30FM ...............................................87
TT31.....................................................87
TT31DC ...............................................87
TT31FM ...............................................87
TT31FMDC..........................................87
TT32A...................................................87
TT32ADC.............................................87
TT32AFM.............................................87
TT32AFMDC .......................................87
TT32B...................................................87
TT32BDC.............................................87
TT32BFM.............................................87
TT32BFMDC .......................................87
TT32C ..................................................87
TT32CDC.............................................87
TT32CFM.............................................87
TT32CFMDC.......................................87
TT33.....................................................87
TT33B...................................................87
TT33BDC.............................................87
TT33BFM.............................................87
TT33BFMDC .......................................87
TT33DC ...............................................87
TT33FM ...............................................87
TT33FMDC..........................................87
TT34A...................................................87
TT34ADC.............................................87
TT34AFM.............................................87
TT34AFMDC .......................................87
TT34B...................................................87
TT34BDC.............................................87
TT34BFM.............................................87
TT34BFMDC .......................................87
TT34C ..................................................87
TT34CDC.............................................87
TT34CFM.............................................87
TT34CFMDC.......................................87
TT34F...................................................87
TT34FDC.............................................87
TT35.....................................................87
TT35DC ...............................................87
TT35FM ...............................................87
TT35FMDC..........................................87
TT36.....................................................87
TT36A...................................................87
TT36ADC.............................................87
TT36AFM.............................................87
TT36AFMDC .......................................87
TT36B...................................................87
TT36BDC.............................................87
TT36C ..................................................87
TT36CDC.............................................87
TT36CFM.............................................87
TT36CFMDC.......................................87
TT36DC ...............................................87
TT36FM ...............................................87
TT36FMDC..........................................87
TT401.................................................230
TT403.................................................230
TT404.................................................230
TT405.................................................230
TT408.................................................230
TT413.................................................230
TT4506...............................................230
TT45106.............................................230
TT45124.............................................230
TT45148.............................................230
TT45206.............................................230
TT45224.............................................230
TT45248.............................................230
TT45306.............................................230
TT45324.............................................230
TT45348.............................................230
TT45406.............................................230
TT45424.............................................230
TT45448.............................................230
TT45524.............................................230
TT45548.............................................230
TT45806.............................................230
TT45824.............................................230
TT45848.............................................230
TT4W24MCF1...................................223
TT4W24MCN1..................................223
TT4W24VCF1 ...................................223
TT4W24VCN1...................................223
TT501.................................................236
TT502.................................................236
TT503.................................................236
TT504.................................................236
TT505.................................................212
TT506.................................................212
TT507.................................................212
TT508.................................................212
TT509.................................................212
TT51 ..........................................215, 218
TT510 ........................................230, 234
TT5102000 ........................................217
TT5102S31........................................217
TT5102S32A .....................................217
TT5102S32B .....................................217
TT5102S33B .....................................217
TT5102S34B .....................................217
TT5102W31.......................................217
TT5102W32A....................................217
TT5102W32B....................................217
TT5102W33B....................................217
TT5102W34B....................................217
TT511.................................................212
TT5121...............................................233
TT5122...............................................233
TT5123...............................................233
TT5124...............................................233
TT5125...............................................233
TT5128...............................................233
TT5131...............................................233
TT5132...............................................233
TT5133...............................................233
TT5134...............................................233
TT5135...............................................233
TT5138...............................................233
TT5141...............................................233
TT5142...............................................233
TT5143...............................................233
TT5144...............................................233
TT5145...............................................233
TT5148...............................................233
TT5151...............................................234
TT5152...............................................234
TT5155...............................................234
TT516.................................................237
TT517.................................................237
TT518.................................................237
TT519.................................................236
TT52...................................................218
TT520.................................................236
TT5202000 ........................................217
TT5202S31........................................217
TT5202W34B....................................217
TT521.................................................236
TT53 ..........................................215, 220
TT5302000 ........................................219
TT5302S95........................................219
TT5302S96........................................219
TT5302W95.......................................219
TT5302W96.......................................219
TT54 ..........................................215, 220
TT5402000 ........................................219
TT5402S95........................................219
TT5402W96.......................................219
TT55 ..........................................215, 218
TT5502S31........................................217
TT5502W34B....................................217
TT552000 ..........................................217
TT56 ..........................................215, 218
TT5602000 ........................................217
TT5602S31........................................217
TT5602W34B....................................217
TT57...................................................220
TT58 ..........................................215, 220
TT59 ..........................................215, 220
TT5902000 ........................................219
TT5902S89........................................219
TT5902W89.......................................219
TT60 ..........................................215, 220
TT6002000 ........................................219
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
327
-
FAX: 773 792 2129
* Please visit the product pages on our website for the most up-to-date product information
TT6002S89........................................219
TT6002W89.......................................219
TT61 ..........................................215, 220
TT6102000 ........................................219
TT6102S89........................................219
TT6102W89.......................................219
TT62 ..........................................215, 220
TT6202000 ........................................219
TT6202S89........................................219
TT6202W89.......................................219
TT631...................................................87
TT632A ................................................87
TT632B ................................................87
TT632C................................................87
TT633...................................................87
TT633B ................................................87
TT634A ................................................87
TT634B ................................................87
TT634C................................................87
TT635...................................................87
TT636...................................................87
TT636A ................................................87
TT636C................................................87
TT6W48MCF1...................................223
TT6W48MCN1..................................223
TT6W48VCF1 ...................................223
TT6W48VCN1...................................223
TT722.................................................264
TT724.................................................264
TT726.................................................264
TT727.................................................264
TT728.................................................264
TT729.................................................264
TT741.................................................264
TT741N0............................................264
TT742.................................................264
TT742N0............................................264
TT744.................................................264
TT744N0............................................264
TT746.................................................264
TT746N0............................................264
TT747.................................................264
TT747N0............................................264
TT748.................................................264
TT749.................................................264
TT861.................................................264
TT862.................................................264
TT864.................................................264
TT866.................................................264
TT867.................................................264
TT868.................................................264
TT869.................................................264
TT89.....................................................89
TT89DC ...............................................89
TT89FM ...............................................89
TT89FMDC..........................................89
TT91001.............................................216
TT91002.............................................216
TT91003.............................................216
TT91004.............................................216
TT91005.............................................216
TT91008.............................................216
TT91011.............................................216
TT91201.............................................216
TT91202.............................................216
TT91203.............................................216
TT91204.............................................216
TT91205.............................................216
TT91208.............................................216
TT91211.............................................216
TT91401.............................................216
TT91402.............................................216
TT91403.............................................216
TT91404.............................................216
TT91405.............................................216
TT91408.............................................216
TT91411.............................................216
TT92001.............................................216
TT92002.............................................216
TT92003.............................................216
TT92004.............................................216
TT92005.............................................216
TT92008.............................................216
TT92011.............................................216
TT92201.............................................216
TT92202.............................................216
TT92203.............................................216
TT92204.............................................216
TT92205.............................................216
TT92208.............................................216
TT92211.............................................216
TT92401.............................................216
TT92402.............................................216
TT92403.............................................216
TT92404.............................................216
TT92405.............................................216
TT92408.............................................216
TT92411.............................................216
TT93001.............................................216
TT93002.............................................216
TT93003.............................................216
TT93004.............................................216
TT93005.............................................216
TT93008.............................................216
TT93011.............................................216
TT93301.............................................216
TT93302.............................................216
TT93303.............................................216
TT93304.............................................216
TT93305.............................................216
TT93308.............................................216
TT93311.............................................216
TT93601.............................................216
TT93602.............................................216
TT93603.............................................216
TT93604.............................................216
TT93605.............................................216
TT93608.............................................216
TT93611.............................................216
TT95.....................................................90
TT95DC ...............................................90
TT95FM ...............................................90
TT95FMDC..........................................90
TT96EDACNO...................................178
TT96EDACNS...................................178
TT96FM ...............................................90
TT96FMDC..........................................90
TTD**..................................................267
TTD5102000 .....................................217
TTD5102S31.....................................217
TTD5102W34B .................................217
TTD5202000 .....................................217
TTD520231........................................217
TTD5202W34B .................................217
TTD5302000 .....................................219
TTD5302S95.....................................219
TTD5302W96....................................219
TTD5402000 .....................................219
TTD5402S95.....................................219
TTD5402W96....................................219
TTD5902000 .....................................219
TTD5902S89.....................................219
TTD5902W89....................................219
TTD6002000 .....................................219
TTD6002S89.....................................219
TTD6002W89....................................219
TTEZN***...........................................177
TTP96ASFN......................................186
TTP96ASHN......................................186
TTP96ASNN......................................186
TTP96K1FN ......................................180
TTP96K1HN......................................180
TTP96K1NN......................................180
TTP96K3BPNS.................................174
TTP96K3FN ......................................180
TTP96K3HN......................................180
TTP96K3NN......................................180
TTP96K3NS ......................................168
TTP96K5BPNS.................................174
TTPFA96K1NO.................................164
TTPFA96K1NS..................................164
TTPH96K1NO...................................171
TTPH96K1NS ...................................171
TTPH96K3NO...................................171
TTPH96K3NS ...................................171
TY3F.....................................................37
TY3FPC ...............................................37
TY4F.....................................................37
TY4FPC ...............................................37
TY5F.....................................................37
TY5FPC ...............................................37
TYEF01................................................37
TYEF02................................................37
TYEF03................................................37
TYEF04................................................37
TYEF05................................................37
TYEF08................................................37
TYEF11................................................37
UJ1 .......................................................93
UJ2A.....................................................93
UJ2B.....................................................93
UJ4B.....................................................93
US001................................................271
US001PC...........................................271
US001ST ...........................................271
VAPK1HD*75T ..........................199-200
VAPK1HD*NT....................................199
VAPK1SD*75T ..................................199
VAPK1SD*NT....................................199
VAPK3HD*75T ..........................199-200
VAPK3HD*NT....................................199
VAPK3SD*75T ..................................199
VAPK3SD*NT....................................199
VJHD*75T..........................................136
VJHD*75TX.......................................195
VJHD*NT ...........................................136
VJHD*NTX.........................................195
VJSD*75T..........................................136
VJSD*75TX .......................................195
VJSD*NT ...........................................136
VJSD*NTX.........................................195
VMAFN ..............................................199
VMP**.................................................266
VMVHD*75T......................................199
VMVHD*NT .......................................199
VMVSD*75T......................................199
VMVSD*NT .......................................199
VP**....................................................266
VPP24K1HD*75T .............................193
VPP24K1HD*NT...............................193
VPP24K1SD*75T..............................193
VPP24K1SD*NT...............................193
VPP24K3HD*75T .............................193
VPP24K3HD*NT...............................193
VPP24K3SD*75T..............................193
VPP24K3SD*NT...............................193
VPP26K1HD*75T .............................193
VPP26K1HD*NT...............................193
VPP26K1SD*75T..............................193
VPP26K1SD*NT...............................193
VPP26K3HD*75T .............................193
VPP26K3HD*NT...............................193
VPP26K3SD*75T..............................193
VPP26K3SD*NT...............................193
W11003..............................................231
W11003L ...........................................231
W11006..............................................231
W11006L ...........................................231
W11012..............................................231
W11012L ...........................................231
W11203..............................................231
W11203L ...........................................231
W11206..............................................231
W11206L ...........................................231
W11212..............................................231
W11212L ...........................................231
W1332A.............................................203
W1334B.............................................203
W1532A301.......................................203
W1532B301.......................................203
W1534B.............................................203
W1534B301.......................................203
W1632B.............................................212
W1634B.............................................212
W1789................................................212
W2532A.............................................205
W2533B.............................................205
W2732A301.......................................205
W2732B.............................................205
W2732B301.......................................205
W2734B301.......................................205
W2789................................................205
W3M.....................................................25
W4M.....................................................25
WA1634B...........................................212
WAD1634B........................................212
WB1650.............................................212
WB1795.............................................212
WB1796.............................................212
WBD1634B........................................212
WBD1650 ..........................................212
WBD1795 ..........................................212
WC1634B ..........................................212
WCD1634B .......................................212
WCMT331............................................83
WCMT332A.........................................84
WCMT332B.........................................83
WCMT333............................................84
WCMT334B.........................................83
WCMT335............................................84
WCMT335A.........................................84
WCMT336............................................83
WCMT336A.........................................83
WCMT336B.........................................84
WCMT336C.........................................83
WCMT336D.........................................83
WCMT336E.........................................84
WD1632B ..........................................212
WD1634B ..........................................212
WD1789.............................................212
WMT331 ..............................................83
WMT332A............................................84
WMT332B............................................83
WMT332C............................................84
WMT333 ..............................................84
WMT333B............................................84
WMT333E............................................84
WMT334A............................................84
WMT334B............................................83
WMT334C............................................84
WMT334E............................................84
WMT334F............................................84
WMT335 ..............................................84
WMT335A............................................84
WMT336 ..............................................83
WMT336A............................................83
WMT336B............................................84
WMT336C............................................83
WMT336D............................................83
WMT336E............................................84
WMT342B............................................83
WMT344B............................................84
WMT388 ..............................................85
WMT389 ..............................................85
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
328
-
PHONE: 773 792 2700
* Please visit the product pages on our website for the most up-to-date product information
WTT31 .................................................87
WTT31DC............................................87
WTT31FM............................................87
WTT31FMDC......................................87
WTT32A...............................................87
WTT32ADC.........................................87
WTT32AFM.........................................87
WTT32AFMDC....................................87
WTT32B...............................................87
WTT32BDC.........................................87
WTT32BFM.........................................87
WTT32BFMDC....................................87
WTT32C...............................................87
WTT32CDC.........................................87
WTT32CFM.........................................87
WTT32CFMDC ...................................87
WTT33 .................................................87
WTT33B...............................................87
WTT33BDC.........................................87
WTT33BFM.........................................87
WTT33BFMDC....................................87
WTT33DC............................................87
WTT33FM............................................87
WTT33FMDC......................................87
WTT34A...............................................87
WTT34ADC.........................................87
WTT34AFM.........................................87
WTT34AFMDC....................................87
WTT34B...............................................87
WTT34BDC.........................................87
WTT34BFM.........................................87
WTT34BFMDC....................................87
WTT35 .................................................87
WTT35DC............................................87
WTT35FM............................................87
WTT35FMDC......................................87
WTT36 .................................................87
WTT36A...............................................87
WTT36ADC.........................................87
WTT36AFM.........................................87
WTT36AFMDC....................................87
WTT36C...............................................87
WTT36CDC.........................................87
WTT36CFM.........................................87
WTT36CFMDC ...................................87
WTT36DC............................................87
WTT36FM............................................87
WTT36FMDC......................................87
WTT631 ...............................................87
WTT632A.............................................87
WTT632B.............................................87
WTT632C ............................................87
WTT633 ...............................................87
WTT633B.............................................87
WTT634A.............................................87
WTT634B.............................................87
WTT634C ............................................87
WTT635 ...............................................87
WTT636 ...............................................87
WTT636A.............................................87
WTT636C ............................................87
WTT89 .................................................89
WTT89DC............................................89
WTT89FM............................................89
WTT89FMDC......................................89
WTT95 .................................................90
WTT95DC............................................90
WTT95FM............................................90
WTT95FMDC......................................90
WTT96FM............................................90
WTT96FMDC......................................90
X1332A ..............................................203
X1332B ..............................................203
X1334B ..............................................203
X1532A ..............................................203
X1532B301........................................203
X1534B ..............................................203
X1542B315........................................203
X21248...............................................317
X2432A ..............................................205
X2432B ..............................................205
X2434B ..............................................205
X2532A ..............................................205
X2532B ..............................................205
X2534B ..............................................205
X2732A ..............................................205
X2732A301........................................205
X2732B ..............................................205
X2732B301........................................205
X2734B ..............................................205
X2734B301........................................205
X2832A ..............................................205
X2932A ..............................................205
X51248...............................................317
XMT332A.............................................84
XMT332B.............................................84
XMT334B.............................................84
Y21248...............................................317
Y28248...............................................317
Y3F.......................................................22
Y3FD ....................................................22
Y3FPC..................................................22
Y3MPC.................................................22
Y51248...............................................317
YEF01 ..................................................22
YEF02 ..................................................22
YEF03 ..................................................22
YEF04 ..................................................22
YEF05 ..................................................22
YEF08 ..................................................22
YMT332A.............................................84
YMT332B.............................................84
YMT334B.............................................84
Z15J ...................................................108
Z21248...............................................317
Z28248...............................................317
Z51248...............................................317
® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
w w w . s w i t c h c r a f t . c o m
相关型号:
©2020 ICPDF网 联系我们和版权申明