X5024BB170D155F520AA [ETC]
Nominal 5 x 2.4 mm blanks for 5x7mm ceramic SMD High Frequency Oscillators; 标称5× 2.4毫米毛坯5x7mm陶瓷SMD高频振荡器
| 型号： | X5024BB170D155F520AA |
| 厂家： | 
ETC |
| 描述： | Nominal 5 x 2.4 mm blanks for 5x7mm ceramic SMD High Frequency Oscillators |
| 文件： | 总5页 (文件大小：376K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
X5024 series
Nominal 5 x 2.4 mm blanks for
5x7mm ceramic SMD High Frequency Oscillators
XECO's X5024 crystal blank series offer high performance inverted mesa crystals at lower cost
via an economical process achieving a frequency tolerance of 0.12f^2. The X5024 is intended for
standard 5x7mm ceramic SMD package. Crystals are 100% tested and sorted by frequency and
then sequentially packed into a waffle packs. Available to 170MHz on the fundamental and
240MHz for third overtone operation.
XECO proprietary processes yield a clean mesa and transition area to achieve good plating over
the transitions and high crystal performance. The X5024 is a lower cost version of the RM196,
which is supplied to a standard frequency tolerance of 0.02f^2.
A frequency report included with the shipment allows crystals to be selected by columns and rows
to use for a plating group. Plating calibration setup accuracy is improved as the frequency of the
crystals used is known, not just part of a sort group range.
FEATURES
APPLICATIONS
•
•
Volume clock oscillators and VCXO
Customer applications for SONET, 10G, 1G,
Storage, network communications
Small packaged crystals for precise fre-
quency control applications
• Rugged Crystal 4.978mm x 2.388mm
• Plateback set for Chrome-Gold elec-
trodes or Aluminum Electrodes
• Sized for 5x7mm ceramic SMD
• 100% tested blanks for highest yield
potential
•
BENEFITS
•
•
• Stable oscillation
Low unit cost
Higher yield through lower breakage
(rugged)
Flexible sorting groups
More accurate plating calibration setup
Excellent oscillator performance
• High Q, chemically etched, free of
etch channels or scratches in the
Mesa area
•
•
•
PRODUCT OFFERING/RANGE
• Fundamental or overtone applications
• 50MHz to 170MHz Fundamental mode*
• 150MHz to 240 MHz third overtone mode*
• AT angles from 35D8' to 35D29.5' [EFG3D6' to
2D45']
• Standard angle tolerance of +/-2'
• Low etch Channel pure Z quartz with a Q mini-
mum of 1.8 million
• Sorted and packed in order of frequency by each lot
• Cleaned and packed in vacuum sealed waffle packs
Typical electrode pattern for 5x7mm
9101 W. Sahara Ave. Suite 105-E10
*See RM196 series for higher frequencies or Z5024
for similar crystal for UM-1 packaging
Phone: (702) 597-2495, Fax: (702) 940-8405
E-mail: sales@vcamerica.com sales@xeco.net
X5024 series
Nominal 5 x 2.4 mm blanks for
5x7mm ceramic SMD High Frequency Oscillators
Ordering Information: XECO builds many frequency and specification combinations to meet
specific customer requests. We list on the following tables those part types selected for general
sale; however, you may specify or “build” your own part / specification using the part number-
ing system shown here. We will be pleased to make most any frequency inside our stated range
— even higher! However, all manufacturing combinations may not be offered, so we recom-
mend you contact VC America for assistance or pre-approval as to what is acceptable.
Below is a partial listing of some common frequencies. You may also specify the desired fre-
quency range. In lieu of sort groups, XECO will supply a data report with all blanks pre-sorted
and sequentially ordered into the waffle packs.
Part Number
Frequency Mode Cut_Angle Angle Tol Frequency Min Frequency Max
X5024BB170D077F760AA
77.76
155.52
156.25
161.13275
155.52
156.25
161.13275
187.5
F
F
F
F
T
T
T
T
T
T
35° 17'
35° 17'
±2'
±2'
±2'
±2'
±2'
±2'
±2'
±2'
±2'
±2'
80.8446
167.0177
167.8557
173.2116
53.4557
53.7147
55.4171
64.729
81.5686
170.1437
171.0117
176.5756
53.7717
54.0327
55.7551
65.193
X5024BB170D155F520AA
X5024BB170D156F250AA
X5024BB170D161F133AA
X5024BB245D155T520AA
X5024BB245D156T250AA
X5024BB245D161T133AA
X5024BB245D187T500AA
X5024BB245D200T000AA
X5024BB245D212T500AA
35° 17'
35° 17'
35° 24.5'
35° 24.5'
35° 24.5'
35° 24.5'
35° 24.5'
35° 24.5'
200
69.1138
73.594
69.6418
74.194
212.5
9101 W. Sahara Ave. Suite 105-E10
Phone: (702) 597-2495, Fax: (702) 940-8405
E-mail: sales@vcamerica.com sales@xeco.net
X5024 series
Nominal 5 x 2.4 mm blanks for
5x7mm ceramic SMD High Frequency Oscillators
X5024 Blank drawing and dimensions
XECO waffle pack dimensions
9101 W. Sahara Ave. Suite 105-E10
Phone: (702) 597-2495, Fax: (702) 940-8405
E-mail: sales@vcamerica.com sales@xeco.net
X5024 series
Nominal 5 x 2.4 mm blanks for
5x7mm ceramic SMD High Frequency Oscillators
This is a portion of a 5 page report submitted with a 300 unit, 3-waffle pack shipment to show how crystals are
loaded into the waffle packs already sorted by frequency.
9101 W. Sahara Ave. Suite 105-E10
Phone: (702) 597-2495, Fax: (702) 940-8405
E-mail: sales@vcamerica.com sales@xeco.net
X5024 series
Nominal 5 x 2.4 mm blanks for
5x7mm ceramic SMD High Frequency Oscillators
The products shown in this document (hereafter “Products) are not intended to be used in medical life support ap-
plications or equipment where device failure may endanger human life. Customers are requested to obtain prior
written agreement for such use from XECO Incorporated. Customer shall be solely responsible for, and indemnify
and hold XECO Inc. free and harmless from any and all claims, damages, losses, expenses, or lawsuits, due to such
use without such agreement. XECO Inc. reserves the right to change the specifications of the Products in order to
improve the characteristic or reliability thereof. XECO Inc. makes no claim or warranty that the contents de-
scribed in this document do not infringe any intellectual property right or other similar right owned by third parties.
Therefore, XECO Inc. shall not be responsible for such problems, even if the use is in accordance with the descrip-
tions provided in this document. Any descriptions including applications, circuits, and the parameters of the Prod-
ucts in this document are for reference to use the Products, and shall not be guaranteed free from defect, inapplica-
bility to the design, or full production products without further testing or modification. Customers are requested
not to export or re-export, directly or indirectly, the Products to any country or any entity not in compliance with or
in violation of the US export laws, treaties, orders, and regulations. Customers are requested to take the appropri-
ate steps to obtain required government permission or approvals for use or export.
9101 W. Sahara Ave. Suite 105-E10
Phone: (702) 597-2495, Fax: (702) 940-8405
E-mail: sales@vcamerica.com sales@xeco.net
相关型号：
©2020 ICPDF网 联系我们和版权申明