GU1086 [ETL]
1.5A Low Dropout Positive Adjustable or Fixed-Mode Regulator;型号: | GU1086 |
厂家: | E-TECH ELECTRONICS LTD |
描述: | 1.5A Low Dropout Positive Adjustable or Fixed-Mode Regulator |
文件: | 总4页 (文件大小:304K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ISSUED DATE :2005/03/14
REVISED DATE :2006/06/01C
GTM
CORPORATION
GU1086
1.5A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Description
The GU1086 is a low dropout positive adjustable or fixed-mode regulator with minimum of 1.5A output current
capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications
such as high-speed bus termination and low current 3.3V logic supply. GU1086 is also well suited for other
applications such as VGA cards. GU1086 is guaranteed to have <1.4V dropout at full load current making it
ideal to provide well-regulated outputs of 1.25 to 5.0V with 4.7 to 12V input supply by different output voltage.
Features
Ԧ3-Terminal Adjustable or fixed 1.5V,1.8V,2.5V,3.3V,5.0V
Ԧ1.4V Maximum Dropout at Full Load current
ԦFast Transient response
ԦBuilt-in Thermal Shutdown
ԦOutput current limiting
Package Dimensions
Millimeter
Millimeter
REF.
REF.
Min.
Max.
4.80
1.00
0.30
0.5
Min.
Max.
1.45
1.47
9.0
A
b
L4
c
4.40
0.76
0.00
0.36
c2
b2
D
1.25
1.17
8.6
e
2.54 REF.
L3
L1
E
1.50 REF.
L
ꢀ
L2
14.6
0˚
1.27 REF.
15.8
8˚
2.29
9.80
2.79
10.4
Typical Circuit
Block Diagram
GU1086
Page: 1/4
ISSUED DATE :2005/03/14
REVISED DATE :2006/06/01C
GTM
CORPORATION
Pin Descriptions
Name
I/O
O
I
Pin#
Function
Adj (GND)
1
Adjustable (Ground only for fixed mode)
The output of the regulator. A minimum of 10uF capacitor must be connected from this pin to
ground to insure stability.
Vout
Vin
2
The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground
to insure that the input voltage does not sag below the minimum dropout voltage during the load
transient response. This pin must always be 1.4V higher than Vout in order for the device to
regulate properly.
3
Absolute Maximum Ratings
Symbol
in
Parameter
Ratings
Unit
V
DC Supply Voltage
-0.3 to 12
V
PD
Power Dissipation
Internally Limited
ć
ć
T
ST
Storage Temperature
-65 ~ + 150
0 ~ + 150
T
OP
Operating Junction Temperature Range
Electrical Characteristics
Parameter
Conditions
MIN
TYP
1.250
1.500
1.800
2.500
3.300
5.000
-
MAX
1.275
1.530
1.836
2.550
3.365
5.100
0.2
UNIT
Reference Voltage
GU1086-ADJ
GU1086-1.5
GU1086-1.8
GU1086-2.5
GU1086-3.3
GU1086-5.0
GU1086-XXX
GU1086-ADJ
GU1086-1.5
GU1086-1.8
GU1086-2.5
GU1086-3.3
GU1086-5.0
Io=10mA, T
Io=10mA, T
Io=10mA, T
Io=10mA, T
Io=10mA, T
Io=10mA, T
J
J
J
J
J
J
=25к, (Vin-Vout )=1.5V
=25к, 3.0V≤Vin≤12V
=25к, 3.3V≤Vin≤12V
=25к, 4.0V≤Vin≤12V
=25к, 4.8V≤Vin≤12V
=25к, 6.5V≤Vin≤12V
1.225
V
V
1.470
1.764
V
Output Voltage
2.450
V
3.235
V
4.900
V
Line Regulator
Io=10mA, Vout+1.5<Vin<12
-
-
-
-
-
-
-
%
Vin=3.3V, 0mA<Io<1.5A, T
Vin=3.0V, 0mA<Io<1.5A, T
Vin=3.3V, 0mA<Io<1.5A, T
Vin=4.0V, 0mA<Io<1.5A, T
Vin=5.0V, 0mA<Io<1.5A, T
Vin=8.0V, 0mA<Io<1.5A, T
J
J
J
J
J
J
=25к(Note 1,2)
=25к(Note 1,2)
=25к(Note 1,2)
=25к(Note 1,2)
=25к(Note 1,2)
=25к(Note 1,2)
-
1
%
12
15
mV
mV
mV
mV
mV
15
18
Load Regulation
20
25
26
33
40
50
Dropout Voltage
(Vin-Vout)
GU1086-XXX
GU1086-XXX
Io=1.5A(∆Vout=1% Vout)
-
1.3
1.4
V
Current Limit
Vin-Vout=5V
1.6
-
5
-
A
mA
uA
Minimum Load Current Adjustable model
Vin=5V
-
-
-
-
10
Adjust Pin Current
Quiescent Current
Thermal Regulation
Adjustable model
fixed model
Vin=12V, Io=10mA
Vin=12V, Io=0mA
55
-
100
12
mA
%/W
T
A
=25к, 30ms pulse
0.008
0.04
F=120Hz, COUT=25uF, Tantalum, Io=1.5A
Ripple Rejection
GU1086-XXX
Io=10mA
Vin=Vout+3V
-
-
60
70
-
dB
%
Temperature Stability
0.5
Thermal Resistance
Junction–to-Ambient
(No heat sink ;No air flow)
-
83
-
-
к/W
к/W
Thermal Resistance
Junction-to-Case
Control Circuitry/Power Transistor
-
0.65/2.7
Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured
at a constant junction Temperature by low duty cycle pulse testing. Load regulation is measured at the output lead =1/18” from the
package.
Note 2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the
difference in input and output and the output current. Guaranteed maximum power dissipation will not be available over the full
input/output range.
GU1086
Page: 2/4
ISSUED DATE :2005/03/14
REVISED DATE :2006/06/01C
GTM
CORPORATION
Functional Description
Introduction
The GU1086 adjustable or fixed-mode Low Dropout (LDO) regulator is a 3 terminal device which can easily be
programmed by internal mask change to any voltage within the range of 1.25 to Vin-1.4V. The GU1086 only needs 1.4V
differential between Vin and Vout to maintain output regulation, in addition, the output voltage tolerances are also extremely
tight and they include the transient response as port of the specification. For example, Intel VRE specification calls for a
total of ±100mV including initial tolerance, load regulation and 0 to 1.5A load step. The GU1086 is specifically designed to
meet the fast current transient needs as well as providing an accurate initial voltage, reducing the overall system cost with
the need for fewer output capacitors.
Load Regulation
Since the GU1086 is only a 3 terminal device, it is not possible to provide true remote sensing of the output voltage at the
load. But it can supply good load regulation by internal feedback bypass the external loss such as adjustable mode.
Stability
The GU1086 requires the use of an output capacitor as part of the frequency compensation in order to make the regulator
stable .For most applications a minimum of 10uF aluminum electrolytic capacitor insures both stability and good transient
response.
Thermal Design
The GU1086 incorporates an internal shutdown that protects the device when the junction temperature exceeds the
maximum allowable junction temperatures. Although this device can operate with junction temperatures in the range of
150к, it is recommended that the selected heat sink be chosen such that during maximum continuous load operation the
junction temperature is kept below the temperature.
Layout Consideration
The output capacitors must be located as close to the Vout terminal of the device as possible .It is recommended to use a
section of a layer of the PC board as a plane to connect the Vout pin to the output capacitors to prevent any high frequency
oscillation that may result due to excessive trace inductance.
GU1086
Page: 3/4
ISSUED DATE :2005/03/14
REVISED DATE :2006/06/01C
GTM
CORPORATION
Typical Performance Characteristics
Important Notice:
ó
ó
ó
ó
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM.
GTM reserves the right to make changes to its products without notice.
GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems.
GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
ó
Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C.
TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785
ó
China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China
TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165
GU1086
Page: 4/4
相关型号:
©2020 ICPDF网 联系我们和版权申明